iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
38d9029a65
linux/drivers/pci/Kconfig

122 lines
3.3 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# PCI configuration
#
PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+
2015-05-28 03:23:51 +03:00
config PCI_BUS_ADDR_T_64BIT
PCI: Don't use 64-bit bus addresses on PA-RISC Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+
2015-08-20 08:08:15 +03:00
def_bool y if (ARCH_DMA_ADDR_T_64BIT || (64BIT && !PARISC))
PCI: Add pci_bus_addr_t David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") fails to boot on sparc/T5-8: pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000) The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA addresses, i.e., bus addresses returned via the DMA API (dma_map_single(), etc.), while the PCI core assumed dma_addr_t could hold *any* bus address, including raw BAR values. On sparc64, all DMA addresses fit in 32 bits, so dma_addr_t is a 32-bit type. However, BAR values can be 64 bits wide, so they don't fit in a dma_addr_t. d63e2e1f3df9 added new checking that tripped over this mismatch. Add pci_bus_addr_t, which is wide enough to hold any PCI bus address, including both raw BAR values and DMA addresses. This will be 64 bits on 64-bit platforms and on platforms with a 64-bit dma_addr_t. Then dma_addr_t only needs to be wide enough to hold addresses from the DMA API. [bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at least as wide as dma_addr_t, documentation] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB") Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231 Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> CC: stable@vger.kernel.org # v3.19+
2015-05-28 03:23:51 +03:00
depends on PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config PCI_MSI
bool "Message Signaled Interrupts (MSI and MSI-X)"
depends on PCI
PCI/MSI: Move cached entry functions to irq core Required to support non PCI based MSI. [ tglx: Extracted from Jiangs patch series ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-12 14:11:25 +03:00
select GENERIC_MSI_IRQ
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
help
This allows device drivers to enable MSI (Message Signaled
Interrupts). Message Signaled Interrupts enable a device to
generate an interrupt using an inbound Memory Write on its
PCI bus instead of asserting a device IRQ pin.
[PATCH] PCI: Provide a boot parameter to disable MSI Several drivers are starting to grow options to disable MSI. However, it's often a host chipset issue, not something which individual drivers should handle. So we add the pci=nomsi kernel parameter to allow the user to disable MSI modes for systems we haven't added to the quirk list yet. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-06 08:33:34 +03:00
Use of PCI MSI interrupts can be disabled at kernel boot time
by using the 'pci=nomsi' option. This disables MSI for the
entire system.
PCI: change PCI_MSI help text to recommend enabling Most current machines have no problem with this, and in fact many devices and features work best (or only!) with MSI. Reported-by: Petteri Räty <betelgeuse@gentoo.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-08 20:38:47 +04:00
If you don't know what to do here, say Y.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
PCI/MSI: Enhance core to support hierarchy irqdomain Enhance PCI MSI core to support hierarchy irqdomain, so the common code can be shared across architectures. [ tglx: Extracted and combined from several patches ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-11 16:02:18 +03:00
config PCI_MSI_IRQ_DOMAIN
bool
depends on PCI_MSI
select GENERIC_MSI_IRQ_DOMAIN
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
help
Say Y here if you want the PCI core to produce a bunch of debug
messages to the system log. Select this if you are having a
problem with PCI support and want to see more of what is going on.
When in doubt, say N.
PCI: add a PCI resource reallocation config option Add a new config option, PCI_REALLOC_ENABLE_AUTO, which will automatically try to re-allocate PCI resources if PCI_IOV support is enabled and the SR-IOV resources are unassigned. Behavior can still be controlled using the pci=realloc= parameter. -v2: According to Jesse, adding one CONFIG option for distribution to disable it or enable it. -v3: update Kconfig text (jbarnes) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24 07:23:32 +04:00
config PCI_REALLOC_ENABLE_AUTO
bool "Enable PCI resource re-allocation detection"
depends on PCI
help
Say Y here if you want the PCI core to detect if PCI resource
re-allocation needs to be enabled. You can always use pci=realloc=on
or pci=realloc=off to override it. Note this feature is a no-op
unless PCI_IOV support is also enabled; in that case it will
automatically re-allocate PCI resources if SR-IOV BARs have not
been allocated by the BIOS.
When in doubt, say N.
PCI: pci-stub module to reserve pci device When doing device assignment with KVM there's currently nothing to protect the device from having a driver in the host as well as the guest. This trivial module just binds the pci device on the host to a stub driver so that a real host driver can't bind to the device. It has no pci id table, it supports only dynamic ids. # echo "8086 10f5" > /sys/bus/pci/drivers/pci-stub/new_id # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/pci-stub/bind # ls -l /sys/bus/pci/devices/0000:00:19.0/driver lrwxrwxrwx 1 root root 0 2008-11-25 19:10 /sys/bus/pci/devices/0000:00:19.0/driver -> ../../../bus/pci/drivers/pci-stub Cc: "Kay, Allen M" <allen.m.kay@intel.com> Cc: "Nakajima, Jun" <jun.nakajima@intel.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-26 08:17:13 +03:00
config PCI_STUB
tristate "PCI Stub driver"
depends on PCI
help
Say Y or M here if you want be able to reserve a PCI device
when it is going to be assigned to a guest operating system.
When in doubt, say N.
xen-pcifront: Xen PCI frontend driver. This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-08-03 05:31:05 +04:00
config XEN_PCIDEV_FRONTEND
tristate "Xen PCI Frontend"
depends on PCI && X86 && XEN
select PCI_XEN
xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-12-11 06:33:15 +03:00
select XEN_XENBUS_FRONTEND
xen-pcifront: Xen PCI frontend driver. This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-08-03 05:31:05 +04:00
default y
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
[PATCH] Initial generic hypertransport interrupt support This patch implements two functions ht_create_irq and ht_destroy_irq for use by drivers. Several other functions are implemented as helpers for arch specific irq_chip handlers. The driver for the card I tested this on isn't yet ready to be merged. However this code is and hypertransport irqs are in use in a few other places in the kernel. Not that any of this will get merged before 2.6.19 Because the ipath-ht400 is slightly out of spec this code will need to be generalized to work there. I think all of the powerpc uses are for a plain interrupt controller in a chipset so support for native hypertransport devices is a little less interesting. However I think this is a half way decent model on how to separate arch specific and generic helper code, and I think this is a functional model of how to get the architecture dependencies out of the msi code. [akpm@osdl.org: Kconfig fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 13:16:55 +04:00
config HT_IRQ
bool "Interrupts on hypertransport devices"
default y
x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC Now we have splitted functions to support MSI and HT_IRQ into vector.c, and they have no dependency on IOAPIC any more. So change Kconfig files to make MSI and HT_IRQ independent of X86_IO_APIC. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1414397531-28254-16-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-27 11:12:06 +03:00
depends on PCI && X86_LOCAL_APIC
[PATCH] Initial generic hypertransport interrupt support This patch implements two functions ht_create_irq and ht_destroy_irq for use by drivers. Several other functions are implemented as helpers for arch specific irq_chip handlers. The driver for the card I tested this on isn't yet ready to be merged. However this code is and hypertransport irqs are in use in a few other places in the kernel. Not that any of this will get merged before 2.6.19 Because the ipath-ht400 is slightly out of spec this code will need to be generalized to work there. I think all of the powerpc uses are for a plain interrupt controller in a chipset so support for native hypertransport devices is a little less interesting. However I think this is a half way decent model on how to separate arch specific and generic helper code, and I think this is a functional model of how to get the architecture dependencies out of the msi code. [akpm@osdl.org: Kconfig fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 13:16:55 +04:00
help
This allows native hypertransport devices to use interrupts.
If unsure say Y.
PCI: initialize and release SR-IOV capability If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 06:25:11 +03:00
PCI: Move ATS implementation into own file ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 17:57:13 +04:00
config PCI_ATS
bool
PCI: initialize and release SR-IOV capability If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 06:25:11 +03:00
config PCI_IOV
bool "PCI IOV support"
depends on PCI
PCI: Move ATS implementation into own file ATS does not depend on IOV support, so move the code into its own file. This file will also include support for the PRI and PASID capabilities later. Also give ATS its own Kconfig variable to allow selecting it without IOV support. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 17:57:13 +04:00
select PCI_ATS
PCI: initialize and release SR-IOV capability If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 06:25:11 +03:00
help
I/O Virtualization is a PCI feature supported by some devices
which allows them to create virtual devices which share their
physical resources.
If unsure, say N.
PCI hotplug: move IOAPIC support from acpiphp to ioapic driver This patch moves PCI I/O APIC support from acpiphp to a separate driver. Like pciehp and shpchp, acpiphp handles PCI hotplug, i.e., addition and removal of PCI adapters. But in addition, acpiphp handles some ACPI hotplug, such as the addition of new host bridges, and the I/O APIC support was tangled up with that. I don't think the I/O APIC support needs to be in acpiphp; PCI I/O APICs usually appear as a function on a PCI host bridge, and we'll enumerate the APIC before any of the devices behind the bridge that use it. As far as I know, nobody actually uses I/O APIC hotplug. It depends on acpi_register_ioapic(), which is only implemented for ia64, and I don't think any vendors have supported I/O chassis hotplug yet. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> CC: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-26 20:20:47 +03:00
PCI: Add implementation for PRI capability Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 17:57:15 +04:00
config PCI_PRI
bool "PCI PRI support"
PCI: Let PCI_PRI depend on PCI This avoids the PCI_PRI question in 'make config' when PCI is not selected. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-30 19:35:07 +04:00
depends on PCI
PCI: Add implementation for PRI capability Implement the necessary functions to handle PRI capabilities on PCIe devices. With PRI devices behind an IOMMU can signal page fault conditions to software and recover from such faults. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 17:57:15 +04:00
select PCI_ATS
help
PRI is the PCI Page Request Interface. It allows PCI devices that are
behind an IOMMU to recover from page faults.
If unsure, say N.
PCI: Add support for PASID capability Devices supporting Process Address Space Identifiers (PASIDs) can use an IOMMU to access multiple IO address spaces at the same time. A PCIe device indicates support for this feature by implementing the PASID capability. This patch adds support for the capability to the Linux kernel. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-09-27 17:57:16 +04:00
config PCI_PASID
bool "PCI PASID support"
depends on PCI
select PCI_ATS
help
Process Address Space Identifiers (PASIDs) can be used by PCI devices
to access more than one IO address space at the same time. To make
use of this feature an IOMMU is required which also supports PASIDs.
Select this option if you have such an IOMMU and want to compile the
driver for it into your kernel.
If unsure, say N.
PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig Create a kconfig option symbol for PCI_LABEL and enable it when DMI || ACPI are enabled. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-29 20:45:57 +04:00
config PCI_LABEL
def_bool y if (DMI || ACPI)
select NLS
pci: PCIe driver for Marvell Armada 370/XP systems This driver implements the support for the PCIe interfaces on the Marvell Armada 370/XP ARM SoCs. In the future, it might be extended to cover earlier families of Marvell SoCs, such as Dove, Orion and Kirkwood. The driver implements the hw_pci operations needed by the core ARM PCI code to setup PCI devices and get their corresponding IRQs, and the pci_ops operations that are used by the PCI core to read/write the configuration space of PCI devices. Since the PCIe interfaces of Marvell SoCs are completely separate and not linked together in a bus, this driver sets up an emulated PCI host bridge, with one PCI-to-PCI bridge as child for each hardware PCIe interface. In addition, this driver enumerates the different PCIe slots, and for those having a device plugged in, it sets up the necessary address decoding windows, using the mvebu-mbus driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-16 19:55:22 +04:00
source "drivers/pci/host/Kconfig"
Reference in New Issue Copy Permalink