linux/drivers/gpu/drm/i915/gt/uc/intel_guc.c

728 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: MIT
/*
* Copyright © 2014-2019 Intel Corporation
*/
#include "gt/intel_gt.h"
#include "gt/intel_gt_irq.h"
#include "gt/intel_gt_pm_irq.h"
#include "intel_guc.h"
#include "intel_guc_ads.h"
#include "intel_guc_submission.h"
#include "i915_drv.h"
/**
* DOC: GuC
*
* The GuC is a microcontroller inside the GT HW, introduced in gen9. The GuC is
* designed to offload some of the functionality usually performed by the host
* driver; currently the main operations it can take care of are:
*
* - Authentication of the HuC, which is required to fully enable HuC usage.
* - Low latency graphics context scheduling (a.k.a. GuC submission).
* - GT Power management.
*
* The enable_guc module parameter can be used to select which of those
* operations to enable within GuC. Note that not all the operations are
* supported on all gen9+ platforms.
*
* Enabling the GuC is not mandatory and therefore the firmware is only loaded
* if at least one of the operations is selected. However, not loading the GuC
* might result in the loss of some features that do require the GuC (currently
* just the HuC, but more are expected to land in the future).
*/
void intel_guc_notify(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
/*
* On Gen11+, the value written to the register is passes as a payload
* to the FW. However, the FW currently treats all values the same way
* (H2G interrupt), so we can just write the value that the HW expects
* on older gens.
*/
intel_uncore_write(gt->uncore, guc->notify_reg, GUC_SEND_TRIGGER);
}
static inline i915_reg_t guc_send_reg(struct intel_guc *guc, u32 i)
{
GEM_BUG_ON(!guc->send_regs.base);
GEM_BUG_ON(!guc->send_regs.count);
GEM_BUG_ON(i >= guc->send_regs.count);
return _MMIO(guc->send_regs.base + 4 * i);
}
void intel_guc_init_send_regs(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
enum forcewake_domains fw_domains = 0;
unsigned int i;
if (INTEL_GEN(gt->i915) >= 11) {
guc->send_regs.base =
i915_mmio_reg_offset(GEN11_SOFT_SCRATCH(0));
guc->send_regs.count = GEN11_SOFT_SCRATCH_COUNT;
} else {
guc->send_regs.base = i915_mmio_reg_offset(SOFT_SCRATCH(0));
guc->send_regs.count = GUC_MAX_MMIO_MSG_LEN;
BUILD_BUG_ON(GUC_MAX_MMIO_MSG_LEN > SOFT_SCRATCH_COUNT);
}
for (i = 0; i < guc->send_regs.count; i++) {
fw_domains |= intel_uncore_forcewake_for_reg(gt->uncore,
guc_send_reg(guc, i),
FW_REG_READ | FW_REG_WRITE);
}
guc->send_regs.fw_domains = fw_domains;
}
static void gen9_reset_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
assert_rpm_wakelock_held(&gt->i915->runtime_pm);
spin_lock_irq(&gt->irq_lock);
gen6_gt_pm_reset_iir(gt, gt->pm_guc_events);
spin_unlock_irq(&gt->irq_lock);
}
static void gen9_enable_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
assert_rpm_wakelock_held(&gt->i915->runtime_pm);
spin_lock_irq(&gt->irq_lock);
if (!guc->interrupts.enabled) {
WARN_ON_ONCE(intel_uncore_read(gt->uncore, GEN8_GT_IIR(2)) &
gt->pm_guc_events);
guc->interrupts.enabled = true;
gen6_gt_pm_enable_irq(gt, gt->pm_guc_events);
}
spin_unlock_irq(&gt->irq_lock);
}
static void gen9_disable_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
assert_rpm_wakelock_held(&gt->i915->runtime_pm);
spin_lock_irq(&gt->irq_lock);
guc->interrupts.enabled = false;
gen6_gt_pm_disable_irq(gt, gt->pm_guc_events);
spin_unlock_irq(&gt->irq_lock);
intel_synchronize_irq(gt->i915);
gen9_reset_guc_interrupts(guc);
}
static void gen11_reset_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
spin_lock_irq(&gt->irq_lock);
gen11_gt_reset_one_iir(gt, 0, GEN11_GUC);
spin_unlock_irq(&gt->irq_lock);
}
static void gen11_enable_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
spin_lock_irq(&gt->irq_lock);
if (!guc->interrupts.enabled) {
u32 events = REG_FIELD_PREP(ENGINE1_MASK, GUC_INTR_GUC2HOST);
WARN_ON_ONCE(gen11_gt_reset_one_iir(gt, 0, GEN11_GUC));
intel_uncore_write(gt->uncore,
GEN11_GUC_SG_INTR_ENABLE, events);
intel_uncore_write(gt->uncore,
GEN11_GUC_SG_INTR_MASK, ~events);
guc->interrupts.enabled = true;
}
spin_unlock_irq(&gt->irq_lock);
}
static void gen11_disable_guc_interrupts(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
spin_lock_irq(&gt->irq_lock);
guc->interrupts.enabled = false;
intel_uncore_write(gt->uncore, GEN11_GUC_SG_INTR_MASK, ~0);
intel_uncore_write(gt->uncore, GEN11_GUC_SG_INTR_ENABLE, 0);
spin_unlock_irq(&gt->irq_lock);
intel_synchronize_irq(gt->i915);
gen11_reset_guc_interrupts(guc);
}
void intel_guc_init_early(struct intel_guc *guc)
{
struct drm_i915_private *i915 = guc_to_gt(guc)->i915;
intel_guc_fw_init_early(guc);
intel_guc_ct_init_early(&guc->ct);
intel_guc_log_init_early(&guc->log);
intel_guc_submission_init_early(guc);
mutex_init(&guc->send_mutex);
spin_lock_init(&guc->irq_lock);
if (INTEL_GEN(i915) >= 11) {
guc->notify_reg = GEN11_GUC_HOST_INTERRUPT;
guc->interrupts.reset = gen11_reset_guc_interrupts;
guc->interrupts.enable = gen11_enable_guc_interrupts;
guc->interrupts.disable = gen11_disable_guc_interrupts;
} else {
guc->notify_reg = GUC_SEND_INTERRUPT;
guc->interrupts.reset = gen9_reset_guc_interrupts;
guc->interrupts.enable = gen9_enable_guc_interrupts;
guc->interrupts.disable = gen9_disable_guc_interrupts;
}
}
static u32 guc_ctl_debug_flags(struct intel_guc *guc)
{
u32 level = intel_guc_log_get_level(&guc->log);
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
u32 flags = 0;
if (!GUC_LOG_LEVEL_IS_VERBOSE(level))
flags |= GUC_LOG_DISABLED;
else
flags |= GUC_LOG_LEVEL_TO_VERBOSITY(level) <<
GUC_LOG_VERBOSITY_SHIFT;
return flags;
}
static u32 guc_ctl_feature_flags(struct intel_guc *guc)
{
u32 flags = 0;
if (!intel_guc_submission_is_used(guc))
flags |= GUC_CTL_DISABLE_SCHEDULER;
return flags;
}
static u32 guc_ctl_ctxinfo_flags(struct intel_guc *guc)
{
u32 flags = 0;
if (intel_guc_submission_is_used(guc)) {
u32 ctxnum, base;
base = intel_guc_ggtt_offset(guc, guc->stage_desc_pool);
ctxnum = GUC_MAX_STAGE_DESCRIPTORS / 16;
base >>= PAGE_SHIFT;
flags |= (base << GUC_CTL_BASE_ADDR_SHIFT) |
(ctxnum << GUC_CTL_CTXNUM_IN16_SHIFT);
}
return flags;
}
static u32 guc_ctl_log_params_flags(struct intel_guc *guc)
{
u32 offset = intel_guc_ggtt_offset(guc, guc->log.vma) >> PAGE_SHIFT;
u32 flags;
#if (((CRASH_BUFFER_SIZE) % SZ_1M) == 0)
#define UNIT SZ_1M
#define FLAG GUC_LOG_ALLOC_IN_MEGABYTE
#else
#define UNIT SZ_4K
#define FLAG 0
#endif
BUILD_BUG_ON(!CRASH_BUFFER_SIZE);
BUILD_BUG_ON(!IS_ALIGNED(CRASH_BUFFER_SIZE, UNIT));
BUILD_BUG_ON(!DPC_BUFFER_SIZE);
BUILD_BUG_ON(!IS_ALIGNED(DPC_BUFFER_SIZE, UNIT));
BUILD_BUG_ON(!ISR_BUFFER_SIZE);
BUILD_BUG_ON(!IS_ALIGNED(ISR_BUFFER_SIZE, UNIT));
BUILD_BUG_ON((CRASH_BUFFER_SIZE / UNIT - 1) >
(GUC_LOG_CRASH_MASK >> GUC_LOG_CRASH_SHIFT));
BUILD_BUG_ON((DPC_BUFFER_SIZE / UNIT - 1) >
(GUC_LOG_DPC_MASK >> GUC_LOG_DPC_SHIFT));
BUILD_BUG_ON((ISR_BUFFER_SIZE / UNIT - 1) >
(GUC_LOG_ISR_MASK >> GUC_LOG_ISR_SHIFT));
flags = GUC_LOG_VALID |
GUC_LOG_NOTIFY_ON_HALF_FULL |
FLAG |
((CRASH_BUFFER_SIZE / UNIT - 1) << GUC_LOG_CRASH_SHIFT) |
((DPC_BUFFER_SIZE / UNIT - 1) << GUC_LOG_DPC_SHIFT) |
((ISR_BUFFER_SIZE / UNIT - 1) << GUC_LOG_ISR_SHIFT) |
(offset << GUC_LOG_BUF_ADDR_SHIFT);
#undef UNIT
#undef FLAG
return flags;
}
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
static u32 guc_ctl_ads_flags(struct intel_guc *guc)
{
u32 ads = intel_guc_ggtt_offset(guc, guc->ads_vma) >> PAGE_SHIFT;
u32 flags = ads << GUC_ADS_ADDR_SHIFT;
return flags;
}
/*
* Initialise the GuC parameter block before starting the firmware
* transfer. These parameters are read by the firmware on startup
* and cannot be changed thereafter.
*/
static void guc_init_params(struct intel_guc *guc)
{
u32 *params = guc->params;
int i;
BUILD_BUG_ON(sizeof(guc->params) != GUC_CTL_MAX_DWORDS * sizeof(u32));
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
params[GUC_CTL_CTXINFO] = guc_ctl_ctxinfo_flags(guc);
params[GUC_CTL_LOG_PARAMS] = guc_ctl_log_params_flags(guc);
params[GUC_CTL_FEATURE] = guc_ctl_feature_flags(guc);
params[GUC_CTL_DEBUG] = guc_ctl_debug_flags(guc);
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
params[GUC_CTL_ADS] = guc_ctl_ads_flags(guc);
for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
DRM_DEBUG_DRIVER("param[%2d] = %#x\n", i, params[i]);
}
/*
* Initialise the GuC parameter block before starting the firmware
* transfer. These parameters are read by the firmware on startup
* and cannot be changed thereafter.
*/
void intel_guc_write_params(struct intel_guc *guc)
{
struct intel_uncore *uncore = guc_to_gt(guc)->uncore;
int i;
/*
* All SOFT_SCRATCH registers are in FORCEWAKE_BLITTER domain and
* they are power context saved so it's ok to release forcewake
* when we are done here and take it again at xfer time.
*/
intel_uncore_forcewake_get(uncore, FORCEWAKE_BLITTER);
intel_uncore_write(uncore, SOFT_SCRATCH(0), 0);
for (i = 0; i < GUC_CTL_MAX_DWORDS; i++)
intel_uncore_write(uncore, SOFT_SCRATCH(1 + i), guc->params[i]);
intel_uncore_forcewake_put(uncore, FORCEWAKE_BLITTER);
}
int intel_guc_init(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
int ret;
ret = intel_uc_fw_init(&guc->fw);
if (ret)
goto err_fetch;
ret = intel_guc_log_create(&guc->log);
if (ret)
goto err_fw;
ret = intel_guc_ads_create(guc);
if (ret)
goto err_log;
GEM_BUG_ON(!guc->ads_vma);
ret = intel_guc_ct_init(&guc->ct);
if (ret)
goto err_ads;
if (intel_guc_submission_is_used(guc)) {
/*
* This is stuff we need to have available at fw load time
* if we are planning to enable submission later
*/
ret = intel_guc_submission_init(guc);
if (ret)
goto err_ct;
}
/* now that everything is perma-pinned, initialize the parameters */
guc_init_params(guc);
/* We need to notify the guc whenever we change the GGTT */
i915_ggtt_enable_guc(gt->ggtt);
return 0;
err_ct:
intel_guc_ct_fini(&guc->ct);
err_ads:
intel_guc_ads_destroy(guc);
err_log:
intel_guc_log_destroy(&guc->log);
err_fw:
intel_uc_fw_fini(&guc->fw);
err_fetch:
intel_uc_fw_cleanup_fetch(&guc->fw);
i915_probe_error(gt->i915, "failed with %d\n", ret);
return ret;
}
void intel_guc_fini(struct intel_guc *guc)
{
struct intel_gt *gt = guc_to_gt(guc);
if (!intel_uc_fw_is_available(&guc->fw))
return;
i915_ggtt_disable_guc(gt->ggtt);
if (intel_guc_submission_is_used(guc))
intel_guc_submission_fini(guc);
intel_guc_ct_fini(&guc->ct);
intel_guc_ads_destroy(guc);
intel_guc_log_destroy(&guc->log);
intel_uc_fw_fini(&guc->fw);
intel_uc_fw_cleanup_fetch(&guc->fw);
intel_uc_fw_change_status(&guc->fw, INTEL_UC_FIRMWARE_DISABLED);
}
/*
* This function implements the MMIO based host to GuC interface.
*/
int intel_guc_send_mmio(struct intel_guc *guc, const u32 *action, u32 len,
u32 *response_buf, u32 response_buf_size)
{
struct intel_uncore *uncore = guc_to_gt(guc)->uncore;
u32 status;
int i;
int ret;
GEM_BUG_ON(!len);
GEM_BUG_ON(len > guc->send_regs.count);
/* We expect only action code */
GEM_BUG_ON(*action & ~INTEL_GUC_MSG_CODE_MASK);
/* If CT is available, we expect to use MMIO only during init/fini */
GEM_BUG_ON(*action != INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER &&
*action != INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER);
mutex_lock(&guc->send_mutex);
intel_uncore_forcewake_get(uncore, guc->send_regs.fw_domains);
for (i = 0; i < len; i++)
intel_uncore_write(uncore, guc_send_reg(guc, i), action[i]);
intel_uncore_posting_read(uncore, guc_send_reg(guc, i - 1));
intel_guc_notify(guc);
/*
* No GuC command should ever take longer than 10ms.
* Fast commands should still complete in 10us.
*/
ret = __intel_wait_for_register_fw(uncore,
guc_send_reg(guc, 0),
INTEL_GUC_MSG_TYPE_MASK,
INTEL_GUC_MSG_TYPE_RESPONSE <<
INTEL_GUC_MSG_TYPE_SHIFT,
10, 10, &status);
/* If GuC explicitly returned an error, convert it to -EIO */
if (!ret && !INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(status))
ret = -EIO;
if (ret) {
DRM_ERROR("MMIO: GuC action %#x failed with error %d %#x\n",
action[0], ret, status);
goto out;
}
if (response_buf) {
int count = min(response_buf_size, guc->send_regs.count - 1);
for (i = 0; i < count; i++)
response_buf[i] = intel_uncore_read(uncore,
guc_send_reg(guc, i + 1));
}
/* Use data from the GuC response as our return value */
ret = INTEL_GUC_MSG_TO_DATA(status);
out:
intel_uncore_forcewake_put(uncore, guc->send_regs.fw_domains);
mutex_unlock(&guc->send_mutex);
return ret;
}
int intel_guc_to_host_process_recv_msg(struct intel_guc *guc,
const u32 *payload, u32 len)
{
u32 msg;
if (unlikely(!len))
return -EPROTO;
/* Make sure to handle only enabled messages */
msg = payload[0] & guc->msg_enabled_mask;
if (msg & (INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER |
INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED))
intel_guc_log_handle_flush_event(&guc->log);
return 0;
}
int intel_guc_sample_forcewake(struct intel_guc *guc)
{
struct drm_i915_private *dev_priv = guc_to_gt(guc)->i915;
u32 action[2];
action[0] = INTEL_GUC_ACTION_SAMPLE_FORCEWAKE;
/* WaRsDisableCoarsePowerGating:skl,cnl */
if (!HAS_RC6(dev_priv) || NEEDS_WaRsDisableCoarsePowerGating(dev_priv))
action[1] = 0;
else
/* bit 0 and 1 are for Render and Media domain separately */
action[1] = GUC_FORCEWAKE_RENDER | GUC_FORCEWAKE_MEDIA;
return intel_guc_send(guc, action, ARRAY_SIZE(action));
}
/**
* intel_guc_auth_huc() - Send action to GuC to authenticate HuC ucode
* @guc: intel_guc structure
* @rsa_offset: rsa offset w.r.t ggtt base of huc vma
*
* Triggers a HuC firmware authentication request to the GuC via intel_guc_send
* INTEL_GUC_ACTION_AUTHENTICATE_HUC interface. This function is invoked by
* intel_huc_auth().
*
* Return: non-zero code on error
*/
int intel_guc_auth_huc(struct intel_guc *guc, u32 rsa_offset)
{
u32 action[] = {
INTEL_GUC_ACTION_AUTHENTICATE_HUC,
rsa_offset
};
return intel_guc_send(guc, action, ARRAY_SIZE(action));
}
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
/**
* intel_guc_suspend() - notify GuC entering suspend state
* @guc: the guc
*/
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
int intel_guc_suspend(struct intel_guc *guc)
{
struct intel_uncore *uncore = guc_to_gt(guc)->uncore;
int ret;
u32 status;
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
u32 action[] = {
INTEL_GUC_ACTION_ENTER_S_STATE,
GUC_POWER_D1, /* any value greater than GUC_POWER_D0 */
};
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by: KiteStramuort <kitestramuort@autistici.org> Reported-by: S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomas Janousek <tomi@nomi.cz> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
2019-11-15 15:15:38 -08:00
/*
* If GuC communication is enabled but submission is not supported,
* we do not need to suspend the GuC.
*/
if (!intel_guc_submission_is_used(guc) || !intel_guc_is_ready(guc))
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by: KiteStramuort <kitestramuort@autistici.org> Reported-by: S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomas Janousek <tomi@nomi.cz> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
2019-11-15 15:15:38 -08:00
return 0;
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
/*
* The ENTER_S_STATE action queues the save/restore operation in GuC FW
* and then returns, so waiting on the H2G is not enough to guarantee
* GuC is done. When all the processing is done, GuC writes
* INTEL_GUC_SLEEP_STATE_SUCCESS to scratch register 14, so we can poll
* on that. Note that GuC does not ensure that the value in the register
* is different from INTEL_GUC_SLEEP_STATE_SUCCESS while the action is
* in progress so we need to take care of that ourselves as well.
*/
intel_uncore_write(uncore, SOFT_SCRATCH(14),
INTEL_GUC_SLEEP_STATE_INVALID_MASK);
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
ret = intel_guc_send(guc, action, ARRAY_SIZE(action));
if (ret)
return ret;
ret = __intel_wait_for_register(uncore, SOFT_SCRATCH(14),
INTEL_GUC_SLEEP_STATE_INVALID_MASK,
0, 0, 10, &status);
if (ret)
return ret;
if (status != INTEL_GUC_SLEEP_STATE_SUCCESS) {
DRM_ERROR("GuC failed to change sleep state. "
"action=0x%x, err=%u\n",
action[0], status);
return -EIO;
}
return 0;
}
drm/i915/guc: Add support for reset engine using GuC commands This patch adds per engine reset and recovery (TDR) support when GuC is used to submit workloads to GPU. In the case of i915 directly submission to ELSP, driver manages hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and GuC. i915 is still responsible for detecting a hang, and when it does it only requests GuC to reset that Engine. GuC internally manages acquiring forcewake and idling the engine before resetting it. Once the reset is successful, i915 takes over again and handles the resubmission. The scheduler in i915 knows which requests are pending so after resetting a engine, pending workloads/requests are resubmitted again. v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the non-guc function names. v3: Removed debug message about engine restarting from which request, since the new baseline do it regardless of submission mode. (Chris) v4: Rebase. v5: Do not pass unnecessary reporting flags to the fw (Jeff); tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase. v6: Rename the existing reset engine function and share a similar interface between guc and non-guc paths (Chris). Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-31 15:53:09 -07:00
/**
* intel_guc_reset_engine() - ask GuC to reset an engine
* @guc: intel_guc structure
* @engine: engine to be reset
*/
int intel_guc_reset_engine(struct intel_guc *guc,
struct intel_engine_cs *engine)
{
/* XXX: to be implemented with submission interface rework */
drm/i915/guc: Add support for reset engine using GuC commands This patch adds per engine reset and recovery (TDR) support when GuC is used to submit workloads to GPU. In the case of i915 directly submission to ELSP, driver manages hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and GuC. i915 is still responsible for detecting a hang, and when it does it only requests GuC to reset that Engine. GuC internally manages acquiring forcewake and idling the engine before resetting it. Once the reset is successful, i915 takes over again and handles the resubmission. The scheduler in i915 knows which requests are pending so after resetting a engine, pending workloads/requests are resubmitted again. v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the non-guc function names. v3: Removed debug message about engine restarting from which request, since the new baseline do it regardless of submission mode. (Chris) v4: Rebase. v5: Do not pass unnecessary reporting flags to the fw (Jeff); tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase. v6: Rename the existing reset engine function and share a similar interface between guc and non-guc paths (Chris). Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-31 15:53:09 -07:00
return -ENODEV;
drm/i915/guc: Add support for reset engine using GuC commands This patch adds per engine reset and recovery (TDR) support when GuC is used to submit workloads to GPU. In the case of i915 directly submission to ELSP, driver manages hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and GuC. i915 is still responsible for detecting a hang, and when it does it only requests GuC to reset that Engine. GuC internally manages acquiring forcewake and idling the engine before resetting it. Once the reset is successful, i915 takes over again and handles the resubmission. The scheduler in i915 knows which requests are pending so after resetting a engine, pending workloads/requests are resubmitted again. v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the non-guc function names. v3: Removed debug message about engine restarting from which request, since the new baseline do it regardless of submission mode. (Chris) v4: Rebase. v5: Do not pass unnecessary reporting flags to the fw (Jeff); tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase. v6: Rename the existing reset engine function and share a similar interface between guc and non-guc paths (Chris). Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-31 15:53:09 -07:00
}
/**
* intel_guc_resume() - notify GuC resuming from suspend state
* @guc: the guc
*/
int intel_guc_resume(struct intel_guc *guc)
{
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
u32 action[] = {
INTEL_GUC_ACTION_EXIT_S_STATE,
GUC_POWER_D0,
};
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by: KiteStramuort <kitestramuort@autistici.org> Reported-by: S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomas Janousek <tomi@nomi.cz> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
2019-11-15 15:15:38 -08:00
/*
* If GuC communication is enabled but submission is not supported,
* we do not need to resume the GuC but we do need to enable the
* GuC communication on resume (above).
*/
if (!intel_guc_submission_is_used(guc) || !intel_guc_is_ready(guc))
drm/i915/guc: Skip suspend/resume GuC action on platforms w/o GuC submission On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by: KiteStramuort <kitestramuort@autistici.org> Reported-by: S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22faa4 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomas Janousek <tomi@nomi.cz> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191115231538.1249-1-don.hiatt@intel.com
2019-11-15 15:15:38 -08:00
return 0;
drm/i915/guc: Updates for GuC 32.0.3 firmware New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-27 18:35:59 +00:00
return intel_guc_send(guc, action, ARRAY_SIZE(action));
}
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
/**
* DOC: GuC Memory Management
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
*
* GuC can't allocate any memory for its own usage, so all the allocations must
* be handled by the host driver. GuC accesses the memory via the GGTT, with the
* exception of the top and bottom parts of the 4GB address space, which are
* instead re-mapped by the GuC HW to memory location of the FW itself (WOPCM)
* or other parts of the HW. The driver must take care not to place objects that
* the GuC is going to access in these reserved ranges. The layout of the GuC
* address space is shown below:
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
*
* ::
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
*
* +===========> +====================+ <== FFFF_FFFF
* ^ | Reserved |
* | +====================+ <== GUC_GGTT_TOP
* | | |
* | | DRAM |
* GuC | |
* Address +===> +====================+ <== GuC ggtt_pin_bias
* Space ^ | |
* | | | |
* | GuC | GuC |
* | WOPCM | WOPCM |
* | Size | |
* | | | |
* v v | |
* +=======+===> +====================+ <== 0000_0000
*
* The lower part of GuC Address Space [0, ggtt_pin_bias) is mapped to GuC WOPCM
* while upper part of GuC Address Space [ggtt_pin_bias, GUC_GGTT_TOP) is mapped
* to DRAM. The value of the GuC ggtt_pin_bias is the GuC WOPCM size.
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
*/
/**
* intel_guc_allocate_vma() - Allocate a GGTT VMA for GuC usage
* @guc: the guc
* @size: size of area to allocate (both virtual space and memory)
*
* This is a wrapper to create an object for use with the GuC. In order to
* use it inside the GuC, an object needs to be pinned lifetime, so we allocate
* both some backing storage and a range inside the Global GTT. We must pin
drm/i915: Implement dynamic GuC WOPCM offset and size calculation Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check. This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes. v2: - Removed intel_wopcm_init (Ville/Sagar/Joonas) - Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar) - Removed unnecessary function calls (Joonas) - Init GuC WOPCM partition as soon as firmware fetching is completed v3: - Fixed indentation issues (Chris) - Removed layering violation code (Chris/Michal) - Created separat files for GuC wopcm code (Michal) - Used inline function to avoid code duplication (Michal) v4: - Preset the GuC WOPCM top during early GuC init (Chris) - Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed v5: - Moved GuC DMA WOPCM register updating code into intel_wopcm.c - Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas) v6: - Made sure the GuC WOPCM size to be multiple of 4K (4K aligned) v8: - Updated comments and fixed naming issues (Sagar/Joonas) - Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar) v9: - Minor changes variable names and code comments (Sagar) - Added detailed GuC WOPCM layout drawing (Sagar/Michal) - Refined macro definitions to be reader friendly (Michal) - Removed redundent check to valid flag (Michal) - Unified first parameter for exported GuC WOPCM functions (Michal) - Refined the name and parameter list of hardware restriction checking functions (Michal) v10: - Used shorter function name for internal functions (Joonas) - Moved init-ealry function into c file (Joonas) - Consolidated and removed redundant size checks (Joonas/Michal) - Removed unnecessary unlikely() from code which is only called once during boot (Joonas) - More fixes to kernel-doc format and content (Michal) - Avoided the use of PAGE_MASK for 4K pages (Michal) - Added error log messages to error paths (Michal) v11: - Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal) - dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal) - Moved WOPCM marco definitions into .c source file (Michal) - Exported WOPCM layout diagram as kernel-doc (Michal) v12: - Updated naming, function kernel-doc to align with new changes (Michal) v13: - Updated the ordering of s-o-b/cc/r-b tags (Sagar) - Corrected one tense error in comment (Sagar) - Corrected typos and removed spurious comments (Joonas) Bspec: 12690 Signed-off-by: Jackie Li <yaodong.li@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v8) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v9) Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> (v11) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v12) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520987574-19351-2-git-send-email-yaodong.li@intel.com
2018-03-13 17:32:50 -07:00
* it in the GGTT somewhere other than than [0, GUC ggtt_pin_bias) because that
* range is reserved inside GuC.
*
* Return: A i915_vma if successful, otherwise an ERR_PTR.
*/
struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size)
{
struct intel_gt *gt = guc_to_gt(guc);
struct drm_i915_gem_object *obj;
struct i915_vma *vma;
drm/i915/guc: Move the pin bias value from GuC to GGTT Removing the pin bias from GuC allows us to not check for GuC every time we pin a context, which fixes the assertion error on unresolved GuC platform default in mock contexts selftest. It also seems that we were using uninitialized WOPCM variables when setting the GuC pin bias. The pin bias has to be set after the WOPCM, but before the call to i915_gem_contexts_init where the first contexts are pinned. v2: This also makes it so that there's no need to set GuC variables from within the WOPCM init function or to move the WOPCM init, while keeping the correct initialization order. Also for mock tests the pin bias is left at 0 and we make sure that the pin bias with GuC will not be smaller than without GuC. v3: Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled. v4: Squash with WOPCM init reordering. Moved the i915_ggtt_pin_bias helper to this patch, and made some functions use it instead of directly dereferencing i915->ggtt. v5: Since we now don't use wopcm.guc.base for the pin bias there's no need to validate it. It also has already been verified in WOPCM init. v6: Deleted the now unnecessarily introduced includes from previous versions. Dropped naming changes from dev_priv to i915 for better patch readability. v7: Changed some comments to make more sense in the context they're in. v8: Moved and renamed the function which now returns the wopcm.guc.size to intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion with the pin_bias in ggtt, which should be used for pinning. Fixed patch not applying or the most recent upstream. Fixes: f7dc0157e4b5 ("drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init") Testcase: igt/drv_selftest/mock_contexts #GuC Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-3-jakub.bartminski@intel.com
2018-07-27 16:11:45 +02:00
u64 flags;
int ret;
obj = i915_gem_object_create_shmem(gt->i915, size);
if (IS_ERR(obj))
return ERR_CAST(obj);
vma = i915_vma_instance(obj, &gt->ggtt->vm, NULL);
if (IS_ERR(vma))
goto err;
flags = PIN_OFFSET_BIAS | i915_ggtt_pin_bias(vma);
ret = i915_ggtt_pin(vma, 0, flags);
if (ret) {
vma = ERR_PTR(ret);
goto err;
}
return i915_vma_make_unshrinkable(vma);
err:
i915_gem_object_put(obj);
return vma;
}
/**
* intel_guc_allocate_and_map_vma() - Allocate and map VMA for GuC usage
* @guc: the guc
* @size: size of area to allocate (both virtual space and memory)
* @out_vma: return variable for the allocated vma pointer
* @out_vaddr: return variable for the obj mapping
*
* This wrapper calls intel_guc_allocate_vma() and then maps the allocated
* object with I915_MAP_WB.
*
* Return: 0 if successful, a negative errno code otherwise.
*/
int intel_guc_allocate_and_map_vma(struct intel_guc *guc, u32 size,
struct i915_vma **out_vma, void **out_vaddr)
{
struct i915_vma *vma;
void *vaddr;
vma = intel_guc_allocate_vma(guc, size);
if (IS_ERR(vma))
return PTR_ERR(vma);
vaddr = i915_gem_object_pin_map(vma->obj, I915_MAP_WB);
if (IS_ERR(vaddr)) {
i915_vma_unpin_and_release(&vma, 0);
return PTR_ERR(vaddr);
}
*out_vma = vma;
*out_vaddr = vaddr;
return 0;
}