iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
3b1bbafbfd
linux/Documentation/hwmon/lm70

52 lines
1.8 KiB
Plaintext
Raw Normal View History

[PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-13 00:00:05 +04:00
Kernel driver lm70
==================
hwmon: (lm70) Add TI TMP121 support The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 18:37:34 +03:00
Supported chips:
[PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-13 00:00:05 +04:00
* National Semiconductor LM70
Datasheet: http://www.national.com/pf/LM/LM70.html
hwmon: (lm70) Add TI TMP121 support The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 18:37:34 +03:00
* Texas Instruments TMP121/TMP123
Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
hwmon: (lm70) Add support for TI TMP122/124 Add support for Texas Instruments TMP122/124 which are nearly identical to their TMP121/123 except that they also support programmable temperature thresholds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-21 22:20:10 +03:00
* Texas Instruments TMP122/TMP124
Information: http://www.ti.com/product/tmp122
hwmon: (lm70) Add support for LM71 and LM74 Add support for LM74 and LM71 to LM70 driver. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-05 13:49:14 +04:00
* National Semiconductor LM71
Datasheet: http://www.ti.com/product/LM71
* National Semiconductor LM74
Datasheet: http://www.ti.com/product/LM74
[PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-13 00:00:05 +04:00
Author:
Kaiwan N Billimoria <kaiwan@designergraphix.com>
Description
-----------
This driver implements support for the National Semiconductor LM70
temperature sensor.
The LM70 temperature sensor chip supports a single temperature sensor.
It communicates with a host processor (or microcontroller) via an
SPI/Microwire Bus interface.
Communication with the LM70 is simple: when the temperature is to be sensed,
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
complement digital temperature (sent via the SIO line), is available in the
driver for interpretation. This driver makes use of the kernel's in-core
SPI support.
hwmon: (lm70) Code streamlining and cleanup This fixes a byteswap bug in the LM70 temperature sensor driver, which was previously covered up by a converse bug in the driver for the LM70EVAL-LLP board (which is also fixed). Other fixes: doc updates, remove an annoying msleep(), and improve three-wire protocol handling. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> [ dbrownell@users.sourceforge.net: doc and whitespace tweaks ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 18:37:34 +03:00
As a real (in-tree) example of this "SPI protocol driver" interfacing
with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c
and its associated documentation.
hwmon: (lm70) Add support for TI TMP122/124 Add support for Texas Instruments TMP122/124 which are nearly identical to their TMP121/123 except that they also support programmable temperature thresholds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-21 22:20:10 +03:00
The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is
13-bit temperature data (0.0625 degrees celsius resolution).
The TMP122/TMP124 also feature configurable temperature thresholds.
hwmon: (lm70) Add support for LM71 and LM74 Add support for LM74 and LM71 to LM70 driver. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-05 13:49:14 +04:00
The LM71 is also very similar; main difference is 14-bit temperature
data (0.03125 degrees celsius resolution).
hwmon: (lm70) Add TI TMP121 support The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07 18:37:34 +03:00
[PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-13 00:00:05 +04:00
Thanks to
---------
Update Jean Delvare's e-mail address Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 23:40:08 +04:00
Jean Delvare <jdelvare@suse.de> for mentoring the hwmon-side driver
[PATCH] lm70: New hardware monitoring driver This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-13 00:00:05 +04:00
development.
Reference in New Issue Copy Permalink