iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/clk/sunxi-ng/ccu-sun50i-h6.c

1259 lines
38 KiB
C
Raw Normal View History

clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
*/
#include <linux/clk-provider.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 15:20:22 -07:00
#include <linux/io.h>
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_mult.h"
#include "ccu_nk.h"
#include "ccu_nkm.h"
#include "ccu_nkmp.h"
#include "ccu_nm.h"
#include "ccu-sun50i-h6.h"
/*
* The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
* P should only be used for output frequencies lower than 288 MHz.
*
* For now we can just model it as a multiplier clock, and force P to /1.
*
* The M factor is present in the register's description, but not in the
* frequency formula, and it's documented as "M is only used for backdoor
* testing", so it's not modelled and then force to 0.
*/
#define SUN50I_H6_PLL_CPUX_REG 0x000
static struct ccu_mult pll_cpux_clk = {
.enable = BIT(31),
.lock = BIT(28),
.mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.common = {
.reg = 0x000,
.hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
&ccu_mult_ops,
CLK_SET_RATE_UNGATE),
},
};
/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
#define SUN50I_H6_PLL_DDR0_REG 0x010
static struct ccu_nkmp pll_ddr0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x010,
.hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_PERIPH0_REG 0x020
static struct ccu_nkmp pll_periph0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 4,
.common = {
.reg = 0x020,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_PERIPH1_REG 0x028
static struct ccu_nkmp pll_periph1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.fixed_post_div = 4,
.common = {
.reg = 0x028,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_GPU_REG 0x030
static struct ccu_nkmp pll_gpu_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x030,
.hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* For Video PLLs, the output divider is described as "used for testing"
* in the user manual. So it's not modelled and forced to 0.
*/
#define SUN50I_H6_PLL_VIDEO0_REG 0x040
static struct ccu_nm pll_video0_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
clk: sunxi-ng: h6: Set video PLLs limits Video PLL factors can be set in a way that final PLL rate is outside stable range. H6 user manual specifically says that N factor should not be below 12. While it doesn't says anything about maximum stable rate, it is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz). Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum to 2.4 GHz, which is maximum in BSP driver. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-04 19:26:41 +01:00
.min_rate = 288000000,
.max_rate = 2400000000UL,
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
.common = {
.reg = 0x040,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video0", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_VIDEO1_REG 0x048
static struct ccu_nm pll_video1_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.fixed_post_div = 4,
clk: sunxi-ng: h6: Set video PLLs limits Video PLL factors can be set in a way that final PLL rate is outside stable range. H6 user manual specifically says that N factor should not be below 12. While it doesn't says anything about maximum stable rate, it is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz). Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum to 2.4 GHz, which is maximum in BSP driver. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-04 19:26:41 +01:00
.min_rate = 288000000,
.max_rate = 2400000000UL,
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
.common = {
.reg = 0x048,
.features = CCU_FEATURE_FIXED_POSTDIV,
.hw.init = CLK_HW_INIT("pll-video1", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_VE_REG 0x058
static struct ccu_nkmp pll_ve_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x058,
.hw.init = CLK_HW_INIT("pll-ve", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_DE_REG 0x060
static struct ccu_nkmp pll_de_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x060,
.hw.init = CLK_HW_INIT("pll-de", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
#define SUN50I_H6_PLL_HSIC_REG 0x070
static struct ccu_nkmp pll_hsic_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
.p = _SUNXI_CCU_DIV(0, 1), /* output divider */
.common = {
.reg = 0x070,
.hw.init = CLK_HW_INIT("pll-hsic", "osc24M",
&ccu_nkmp_ops,
CLK_SET_RATE_UNGATE),
},
};
/*
* The Audio PLL is supposed to have 3 outputs: 2 fixed factors from
* the base (2x and 4x), and one variable divider (the one true pll audio).
*
* We don't have any need for the variable divider for now, so we just
* hardcode it to match with the clock names.
*/
#define SUN50I_H6_PLL_AUDIO_REG 0x078
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
static struct ccu_sdm_setting pll_audio_sdm_table[] = {
{ .rate = 541900800, .pattern = 0xc001288d, .m = 1, .n = 22 },
{ .rate = 589824000, .pattern = 0xc00126e9, .m = 1, .n = 24 },
};
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static struct ccu_nm pll_audio_base_clk = {
.enable = BIT(31),
.lock = BIT(28),
.n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
.m = _SUNXI_CCU_DIV(1, 1), /* input divider */
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
.sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table,
BIT(24), 0x178, BIT(31)),
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
.common = {
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
.features = CCU_FEATURE_SIGMA_DELTA_MOD,
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
.reg = 0x078,
.hw.init = CLK_HW_INIT("pll-audio-base", "osc24M",
&ccu_nm_ops,
CLK_SET_RATE_UNGATE),
},
};
static const char * const cpux_parents[] = { "osc24M", "osc32k",
"iosc", "pll-cpux" };
static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
0x500, 24, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
"iosc", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
psi_ahb1_ahb2_parents,
0x510,
0, 5, /* M */
clk: sunxi-ng: h6: fix bus clocks' divider position The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-09 01:19:52 +08:00
8, 2, /* P */
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
24, 2, /* mux */
0);
static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
"psi-ahb1-ahb2",
"pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
0, 5, /* M */
clk: sunxi-ng: h6: fix bus clocks' divider position The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-09 01:19:52 +08:00
8, 2, /* P */
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
0, 5, /* M */
clk: sunxi-ng: h6: fix bus clocks' divider position The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-09 01:19:52 +08:00
8, 2, /* P */
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
24, 2, /* mux */
0);
static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
0, 5, /* M */
clk: sunxi-ng: h6: fix bus clocks' divider position The bus clocks (AHB/APB) on Allwinner H6 have their second divider start at bit 8, according to the user manual and the BSP code. However, currently the divider offset is incorrectly set to 16, thus the divider is not correctly read and the clock frequency is not correctly calculated. Fix this bit offset on all affected bus clocks in ccu-sun50i-h6. Cc: stable@vger.kernel.org # v4.17.y Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-09 01:19:52 +08:00
8, 2, /* P */
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
24, 2, /* mux */
0);
static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
"pll-ddr0", "pll-periph0-4x" };
static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
0, 3, /* M */
24, 2, /* mux */
BIT(31), /* gate */
CLK_IS_CRITICAL);
static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
clk: sunxi-ng: Allow DE clock to set parent rate DE2/DE3 mixers have to run at specific frequency in order to work optimally. This wasn't actually possible for some SoCs because "de" clock wasn't allowed to adjust parent rate. Add CLK_SET_RATE_PARENT flag to all "de" clocks which didn't have it yet. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-28 21:03:27 +01:00
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
0x60c, BIT(0), 0);
static const char * const deinterlace_parents[] = { "pll-periph0",
"pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
deinterlace_parents,
0x620,
0, 4, /* M */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
0x62c, BIT(0), 0);
static const char * const gpu_parents[] = { "pll-gpu" };
static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
clk: sunxi-ng: h6: Allow GPU to change parent rate GPU PLL was designed with dynamic frequency switching in mind so driver can adjust rate based on the GPU load. Allow GPU clock to change parent rate (GPU PLL is the only possible parent of GPU clock). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-01 22:06:56 +02:00
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
0x67c, BIT(0), 0);
/* Also applies to EMCE */
static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
0x68c, BIT(0), 0);
static const char * const ve_parents[] = { "pll-ve" };
static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate Video related clocks need to set rate as close as possible to the requested one, so they should be able to change parent clock rate. When processing 4K video, VPU clock has to be set to higher rate than it is default parent rate. Because of that, VPU clock should be able to change parent clock rate. Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-03 17:14:03 +02:00
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
0x69c, BIT(0), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(emce_clk, "emce", ce_parents, 0x6b0,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_emce_clk, "bus-emce", "psi-ahb1-ahb2",
0x6bc, BIT(0), 0);
static const char * const vp9_parents[] = { "pll-ve", "pll-periph0-2x" };
static SUNXI_CCU_M_WITH_MUX_GATE(vp9_clk, "vp9", vp9_parents, 0x6c0,
0, 3, /* M */
24, 1, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_vp9_clk, "bus-vp9", "psi-ahb1-ahb2",
0x6cc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
0x70c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
0x71c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
0x72c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
0x73c, BIT(0), 0);
static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
0x78c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
0x79c, BIT(0), 0);
clk: sunxi-ng: h6: fix PWM gate/reset offset Currently the register offset of the PWM bus gate in Allwinner H6 clock driver is wrong. Fix this issue. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Rongyi Chen <chenyi@tt-cool.com> [Icenowy: refactor commit message] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-08-10 23:16:38 +08:00
static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
static const char * const dram_parents[] = { "pll-ddr0" };
static struct ccu_div dram_clk = {
.div = _SUNXI_CCU_DIV(0, 2),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0x800,
.hw.init = CLK_HW_INIT_PARENTS("dram",
dram_parents,
&ccu_div_ops,
CLK_IS_CRITICAL),
},
};
static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
0x804, BIT(0), 0);
static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
0x804, BIT(1), 0);
static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
0x804, BIT(2), 0);
static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
0x804, BIT(3), 0);
static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
0x804, BIT(5), 0);
static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
0x804, BIT(8), 0);
static SUNXI_CCU_GATE(mbus_deinterlace_clk, "mbus-deinterlace", "mbus",
0x804, BIT(11), 0);
static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
0x80c, BIT(0), CLK_IS_CRITICAL);
static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
"pll-periph1", "pll-periph0-2x",
"pll-periph1-2x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
"pll-periph1-2x" };
clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-20 21:40:13 +08:00
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
0, 4, /* M */
8, 2, /* N */
clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width MUX bits for MMC clock register range are 25:24 where 24 is shift and 2 is width So fix the width number from 3 to 2. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-01 00:06:28 +05:30
24, 2, /* mux */
clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-20 21:40:13 +08:00
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
0, 4, /* M */
8, 2, /* N */
clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width MUX bits for MMC clock register range are 25:24 where 24 is shift and 2 is width So fix the width number from 3 to 2. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-01 00:06:28 +05:30
24, 2, /* mux */
clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-20 21:40:13 +08:00
BIT(31), /* gate */
2, /* post-div */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
0, 4, /* M */
8, 2, /* N */
clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width MUX bits for MMC clock register range are 25:24 where 24 is shift and 2 is width So fix the width number from 3 to 2. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-01 00:06:28 +05:30
24, 2, /* mux */
clk: sunxi-ng: sun50i: h6: Add 2x fixed post-divider to MMC module clocks On the H6, the MMC module clocks are fixed in the new timing mode, i.e. they do not have a bit to select the mode. These clocks have a 2x divider somewhere between the clock and the MMC module. To be consistent with other SoCs supporting the new timing mode, we model the 2x divider as a fixed post-divider on the MMC module clocks. This patch adds the post-dividers to the MMC clocks, following the approach on A64. Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-08-20 21:40:13 +08:00
BIT(31), /* gate */
2, /* post-div */
0);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x93c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", 0x93c, BIT(1), 0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
0, 4, /* M */
8, 2, /* N */
24, 3, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
static const char * const ir_tx_parents[] = { "osc32k", "osc24M" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_tx_parents, 0x9c0,
0, 4, /* M */
8, 2, /* N */
24, 1, /* mux */
BIT(31),/* gate */
0);
static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
static const char * const audio_parents[] = { "pll-audio", "pll-audio-2x", "pll-audio-4x" };
static struct ccu_div i2s3_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa0c,
.hw.init = CLK_HW_INIT_PARENTS("i2s3",
audio_parents,
&ccu_div_ops,
clk: sunxi-ng: h6: Allow I2S to change parent rate I2S doesn't work if parent rate couldn't be change. Difference between wanted and actual rate is too big. Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-14 08:08:48 +02:00
CLK_SET_RATE_PARENT),
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
},
};
static struct ccu_div i2s0_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa10,
.hw.init = CLK_HW_INIT_PARENTS("i2s0",
audio_parents,
&ccu_div_ops,
clk: sunxi-ng: h6: Allow I2S to change parent rate I2S doesn't work if parent rate couldn't be change. Difference between wanted and actual rate is too big. Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-14 08:08:48 +02:00
CLK_SET_RATE_PARENT),
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
},
};
static struct ccu_div i2s1_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa14,
.hw.init = CLK_HW_INIT_PARENTS("i2s1",
audio_parents,
&ccu_div_ops,
clk: sunxi-ng: h6: Allow I2S to change parent rate I2S doesn't work if parent rate couldn't be change. Difference between wanted and actual rate is too big. Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-14 08:08:48 +02:00
CLK_SET_RATE_PARENT),
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
},
};
static struct ccu_div i2s2_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa18,
.hw.init = CLK_HW_INIT_PARENTS("i2s2",
audio_parents,
&ccu_div_ops,
clk: sunxi-ng: h6: Allow I2S to change parent rate I2S doesn't work if parent rate couldn't be change. Difference between wanted and actual rate is too big. Fix this by adding CLK_SET_RATE_PARENT flag to I2S clocks. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-14 08:08:48 +02:00
CLK_SET_RATE_PARENT),
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
},
};
static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa1c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa1c, BIT(1), 0);
static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa1c, BIT(2), 0);
static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa1c, BIT(3), 0);
static struct ccu_div spdif_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa20,
.hw.init = CLK_HW_INIT_PARENTS("spdif",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
static struct ccu_div dmic_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa40,
.hw.init = CLK_HW_INIT_PARENTS("dmic",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
static struct ccu_div audio_hub_clk = {
.enable = BIT(31),
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = _SUNXI_CCU_MUX(24, 2),
.common = {
.reg = 0xa60,
.hw.init = CLK_HW_INIT_PARENTS("audio-hub",
audio_parents,
&ccu_div_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
/*
* There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
* We will force them to 0 (12M divided from 48M).
*/
#define SUN50I_H6_USB0_CLK_REG 0xa70
#define SUN50I_H6_USB3_CLK_REG 0xa7c
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0);
static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", 0xa7c, BIT(27), 0);
static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", 0xa7c, BIT(26), 0);
static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
static SUNXI_CCU_GATE(bus_xhci_clk, "bus-xhci", "ahb3", 0xa8c, BIT(5), 0);
static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:10:39 +08:00
static struct clk_fixed_factor pll_periph0_4x_clk;
static CLK_FIXED_FACTOR_HW(pcie_ref_100m_clk, "pcie-ref-100M",
&pll_periph0_4x_clk.hw, 24, 1, 0);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(pcie_ref_clk, "pcie-ref", "pcie-ref-100M",
0xab0, BIT(31), 0);
static SUNXI_CCU_GATE(pcie_ref_out_clk, "pcie-ref-out", "pcie-ref",
0xab0, BIT(30), 0);
static SUNXI_CCU_M_WITH_GATE(pcie_maxi_clk, "pcie-maxi",
"pll-periph0", 0xab4,
0, 4, /* M */
BIT(31), /* gate */
0);
static SUNXI_CCU_M_WITH_GATE(pcie_aux_clk, "pcie-aux", "osc24M", 0xab8,
0, 5, /* M */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_pcie_clk, "bus-pcie", "psi-ahb1-ahb2",
0xabc, BIT(0), 0);
static const char * const hdmi_parents[] = { "pll-video0", "pll-video1",
"pll-video1-4x" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-21 10:46:25 +08:00
static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
{ .index = 1, .div = 36621 },
};
clk: sunxi-ng: h6: Preset hdmi-cec clock parent H6 manual and BSP clock driver both states that hdmi-cec clock has two possible parents, osc32k and pll-periph0-2x with 36621 predivider. Because pll-periph0-2x is always 1.2 GHz, both parents give same hdmi-cec rate - 32768 Hz, which is exactly the rate needed for HDMI CEC controller to operate correctly. However, for some reason, HDMI CEC controller doesn't work if default parent (osc32k) is used. BSP HDMI driver also always use pll-periph0-2x as hdmi-cec clock parent. In order to solve the issue, preset hdmi-cec clock parent to pll-periph0-2x. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-02 23:06:22 +02:00
#define SUN50I_H6_HDMI_CEC_CLK_REG 0xb10
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static struct ccu_mux hdmi_cec_clk = {
.enable = BIT(31),
.mux = {
.shift = 24,
.width = 2,
.fixed_predivs = hdmi_cec_predivs,
.n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
},
.common = {
.reg = 0xb10,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
hdmi_cec_parents,
&ccu_mux_ops,
0),
},
};
static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
0xb5c, BIT(0), 0);
static const char * const tcon_lcd0_parents[] = { "pll-video0",
"pll-video0-4x",
"pll-video1" };
static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
tcon_lcd0_parents, 0xb60,
24, 3, /* mux */
BIT(31), /* gate */
clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate Video related clocks need to set rate as close as possible to the requested one, so they should be able to change parent clock rate. When processing 4K video, VPU clock has to be set to higher rate than it is default parent rate. Because of that, VPU clock should be able to change parent clock rate. Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-03 17:14:03 +02:00
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
0xb7c, BIT(0), 0);
static const char * const tcon_tv0_parents[] = { "pll-video0",
"pll-video0-4x",
"pll-video1",
"pll-video1-4x" };
static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
tcon_tv0_parents, 0xb80,
0, 4, /* M */
8, 2, /* P */
24, 3, /* mux */
BIT(31), /* gate */
clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate Video related clocks need to set rate as close as possible to the requested one, so they should be able to change parent clock rate. When processing 4K video, VPU clock has to be set to higher rate than it is default parent rate. Because of that, VPU clock should be able to change parent clock rate. Add CLK_SET_RATE_PARENT flag to tcon-lcd0, tcon-tv0 and ve. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-03 17:14:03 +02:00
CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
0xb9c, BIT(0), 0);
static SUNXI_CCU_GATE(csi_cci_clk, "csi-cci", "osc24M", 0xc00, BIT(0), 0);
static const char * const csi_top_parents[] = { "pll-video0", "pll-ve",
"pll-periph0" };
static const u8 csi_top_table[] = { 0, 2, 3 };
static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_top_clk, "csi-top",
csi_top_parents, csi_top_table, 0xc04,
0, 4, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static const char * const csi_mclk_parents[] = { "osc24M", "pll-video0",
"pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk",
csi_mclk_parents, 0xc08,
0, 5, /* M */
24, 3, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc2c, BIT(0), 0);
static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
0, 4, /* M */
24, 2, /* mux */
BIT(31), /* gate */
0);
static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
/* Fixed factor clocks */
clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:10:39 +08:00
static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
static const struct clk_hw *clk_parent_pll_audio[] = {
&pll_audio_base_clk.common.hw
};
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
/*
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
* The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
* rates can be set exactly in conjunction with sigma-delta modulation.
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
*/
clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:10:39 +08:00
static CLK_FIXED_FACTOR_HWS(pll_audio_clk, "pll-audio",
clk_parent_pll_audio,
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
24, 1, CLK_SET_RATE_PARENT);
clk: sunxi-ng: h6: Use local parent references for CLK_FIXED_FACTOR With the new clk parenting code and CLK_FIXED_FACTOR_{HW,FW_NAME} macros, we can reference parents locally via pointers to struct clk_hw or DT clock-names. Convert existing CLK_FIXED_FACTOR definitions to either the _HW or _FW_NAME variant based on whether the parent clock is internal or external to the CCU. A forward declaration for struct clk_fixed_factor pll_periph0_4x_clk is added as the definitions of the fixed factor clocks appear much later in the file. The position of fixed factor clock definitions will be moved for all drivers at a later time, before the conversion of all other clock types. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-05-03 18:10:39 +08:00
static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
clk_parent_pll_audio,
4, 1, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
clk_parent_pll_audio,
2, 1, CLK_SET_RATE_PARENT);
static const struct clk_hw *pll_periph0_parents[] = {
&pll_periph0_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_periph0_4x_clk, "pll-periph0-4x",
pll_periph0_parents,
1, 4, 0);
static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
pll_periph0_parents,
1, 2, 0);
static const struct clk_hw *pll_periph1_parents[] = {
&pll_periph1_clk.common.hw
};
static CLK_FIXED_FACTOR_HWS(pll_periph1_4x_clk, "pll-periph1-4x",
pll_periph1_parents,
1, 4, 0);
static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
pll_periph1_parents,
1, 2, 0);
static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
&pll_video0_clk.common.hw,
1, 4, CLK_SET_RATE_PARENT);
static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
&pll_video1_clk.common.hw,
1, 4, CLK_SET_RATE_PARENT);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
static struct ccu_common *sun50i_h6_ccu_clks[] = {
&pll_cpux_clk.common,
&pll_ddr0_clk.common,
&pll_periph0_clk.common,
&pll_periph1_clk.common,
&pll_gpu_clk.common,
&pll_video0_clk.common,
&pll_video1_clk.common,
&pll_ve_clk.common,
&pll_de_clk.common,
&pll_hsic_clk.common,
&pll_audio_base_clk.common,
&cpux_clk.common,
&axi_clk.common,
&cpux_apb_clk.common,
&psi_ahb1_ahb2_clk.common,
&ahb3_clk.common,
&apb1_clk.common,
&apb2_clk.common,
&mbus_clk.common,
&de_clk.common,
&bus_de_clk.common,
&deinterlace_clk.common,
&bus_deinterlace_clk.common,
&gpu_clk.common,
&bus_gpu_clk.common,
&ce_clk.common,
&bus_ce_clk.common,
&ve_clk.common,
&bus_ve_clk.common,
&emce_clk.common,
&bus_emce_clk.common,
&vp9_clk.common,
&bus_vp9_clk.common,
&bus_dma_clk.common,
&bus_msgbox_clk.common,
&bus_spinlock_clk.common,
&bus_hstimer_clk.common,
&avs_clk.common,
&bus_dbg_clk.common,
&bus_psi_clk.common,
&bus_pwm_clk.common,
&bus_iommu_clk.common,
&dram_clk.common,
&mbus_dma_clk.common,
&mbus_ve_clk.common,
&mbus_ce_clk.common,
&mbus_ts_clk.common,
&mbus_nand_clk.common,
&mbus_csi_clk.common,
&mbus_deinterlace_clk.common,
&bus_dram_clk.common,
&nand0_clk.common,
&nand1_clk.common,
&bus_nand_clk.common,
&mmc0_clk.common,
&mmc1_clk.common,
&mmc2_clk.common,
&bus_mmc0_clk.common,
&bus_mmc1_clk.common,
&bus_mmc2_clk.common,
&bus_uart0_clk.common,
&bus_uart1_clk.common,
&bus_uart2_clk.common,
&bus_uart3_clk.common,
&bus_i2c0_clk.common,
&bus_i2c1_clk.common,
&bus_i2c2_clk.common,
&bus_i2c3_clk.common,
&bus_scr0_clk.common,
&bus_scr1_clk.common,
&spi0_clk.common,
&spi1_clk.common,
&bus_spi0_clk.common,
&bus_spi1_clk.common,
&bus_emac_clk.common,
&ts_clk.common,
&bus_ts_clk.common,
&ir_tx_clk.common,
&bus_ir_tx_clk.common,
&bus_ths_clk.common,
&i2s3_clk.common,
&i2s0_clk.common,
&i2s1_clk.common,
&i2s2_clk.common,
&bus_i2s0_clk.common,
&bus_i2s1_clk.common,
&bus_i2s2_clk.common,
&bus_i2s3_clk.common,
&spdif_clk.common,
&bus_spdif_clk.common,
&dmic_clk.common,
&bus_dmic_clk.common,
&audio_hub_clk.common,
&bus_audio_hub_clk.common,
&usb_ohci0_clk.common,
&usb_phy0_clk.common,
&usb_phy1_clk.common,
&usb_ohci3_clk.common,
&usb_phy3_clk.common,
&usb_hsic_12m_clk.common,
&usb_hsic_clk.common,
&bus_ohci0_clk.common,
&bus_ohci3_clk.common,
&bus_ehci0_clk.common,
&bus_xhci_clk.common,
&bus_ehci3_clk.common,
&bus_otg_clk.common,
&pcie_ref_clk.common,
&pcie_ref_out_clk.common,
&pcie_maxi_clk.common,
&pcie_aux_clk.common,
&bus_pcie_clk.common,
&hdmi_clk.common,
clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-21 10:46:25 +08:00
&hdmi_slow_clk.common,
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
&hdmi_cec_clk.common,
&bus_hdmi_clk.common,
&bus_tcon_top_clk.common,
&tcon_lcd0_clk.common,
&bus_tcon_lcd0_clk.common,
&tcon_tv0_clk.common,
&bus_tcon_tv0_clk.common,
&csi_cci_clk.common,
&csi_top_clk.common,
&csi_mclk_clk.common,
&bus_csi_clk.common,
&hdcp_clk.common,
&bus_hdcp_clk.common,
};
static struct clk_hw_onecell_data sun50i_h6_hw_clks = {
.hws = {
[CLK_OSC12M] = &osc12M_clk.hw,
[CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
[CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
[CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
[CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
[CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
[CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
[CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
[CLK_PLL_VE] = &pll_ve_clk.common.hw,
[CLK_PLL_DE] = &pll_de_clk.common.hw,
[CLK_PLL_HSIC] = &pll_hsic_clk.common.hw,
[CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
[CLK_PLL_AUDIO] = &pll_audio_clk.hw,
[CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
[CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
[CLK_CPUX] = &cpux_clk.common.hw,
[CLK_AXI] = &axi_clk.common.hw,
[CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
[CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
[CLK_AHB3] = &ahb3_clk.common.hw,
[CLK_APB1] = &apb1_clk.common.hw,
[CLK_APB2] = &apb2_clk.common.hw,
[CLK_MBUS] = &mbus_clk.common.hw,
[CLK_DE] = &de_clk.common.hw,
[CLK_BUS_DE] = &bus_de_clk.common.hw,
[CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
[CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
[CLK_GPU] = &gpu_clk.common.hw,
[CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
[CLK_CE] = &ce_clk.common.hw,
[CLK_BUS_CE] = &bus_ce_clk.common.hw,
[CLK_VE] = &ve_clk.common.hw,
[CLK_BUS_VE] = &bus_ve_clk.common.hw,
[CLK_EMCE] = &emce_clk.common.hw,
[CLK_BUS_EMCE] = &bus_emce_clk.common.hw,
[CLK_VP9] = &vp9_clk.common.hw,
[CLK_BUS_VP9] = &bus_vp9_clk.common.hw,
[CLK_BUS_DMA] = &bus_dma_clk.common.hw,
[CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
[CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
[CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
[CLK_AVS] = &avs_clk.common.hw,
[CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
[CLK_BUS_PSI] = &bus_psi_clk.common.hw,
[CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
[CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
[CLK_DRAM] = &dram_clk.common.hw,
[CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
[CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
[CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
[CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
[CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
[CLK_MBUS_CSI] = &mbus_csi_clk.common.hw,
[CLK_MBUS_DEINTERLACE] = &mbus_deinterlace_clk.common.hw,
[CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
[CLK_NAND0] = &nand0_clk.common.hw,
[CLK_NAND1] = &nand1_clk.common.hw,
[CLK_BUS_NAND] = &bus_nand_clk.common.hw,
[CLK_MMC0] = &mmc0_clk.common.hw,
[CLK_MMC1] = &mmc1_clk.common.hw,
[CLK_MMC2] = &mmc2_clk.common.hw,
[CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
[CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
[CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
[CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
[CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
[CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
[CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
[CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
[CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
[CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
[CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
[CLK_BUS_SCR0] = &bus_scr0_clk.common.hw,
[CLK_BUS_SCR1] = &bus_scr1_clk.common.hw,
[CLK_SPI0] = &spi0_clk.common.hw,
[CLK_SPI1] = &spi1_clk.common.hw,
[CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
[CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
[CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
[CLK_TS] = &ts_clk.common.hw,
[CLK_BUS_TS] = &bus_ts_clk.common.hw,
[CLK_IR_TX] = &ir_tx_clk.common.hw,
[CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw,
[CLK_BUS_THS] = &bus_ths_clk.common.hw,
[CLK_I2S3] = &i2s3_clk.common.hw,
[CLK_I2S0] = &i2s0_clk.common.hw,
[CLK_I2S1] = &i2s1_clk.common.hw,
[CLK_I2S2] = &i2s2_clk.common.hw,
[CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
[CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
[CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw,
[CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw,
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
[CLK_DMIC] = &dmic_clk.common.hw,
[CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
[CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
[CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw,
[CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
[CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
[CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
[CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
[CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
[CLK_USB_HSIC_12M] = &usb_hsic_12m_clk.common.hw,
[CLK_USB_HSIC] = &usb_hsic_clk.common.hw,
[CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
[CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
[CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
[CLK_BUS_XHCI] = &bus_xhci_clk.common.hw,
[CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
[CLK_BUS_OTG] = &bus_otg_clk.common.hw,
[CLK_PCIE_REF_100M] = &pcie_ref_100m_clk.hw,
[CLK_PCIE_REF] = &pcie_ref_clk.common.hw,
[CLK_PCIE_REF_OUT] = &pcie_ref_out_clk.common.hw,
[CLK_PCIE_MAXI] = &pcie_maxi_clk.common.hw,
[CLK_PCIE_AUX] = &pcie_aux_clk.common.hw,
[CLK_BUS_PCIE] = &bus_pcie_clk.common.hw,
[CLK_HDMI] = &hdmi_clk.common.hw,
clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing in the ccu-sun50i-h6 driver. Add this missing clock to the driver. Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-21 10:46:25 +08:00
[CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
[CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
[CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
[CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
[CLK_TCON_LCD0] = &tcon_lcd0_clk.common.hw,
[CLK_BUS_TCON_LCD0] = &bus_tcon_lcd0_clk.common.hw,
[CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
[CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
[CLK_CSI_CCI] = &csi_cci_clk.common.hw,
[CLK_CSI_TOP] = &csi_top_clk.common.hw,
[CLK_CSI_MCLK] = &csi_mclk_clk.common.hw,
[CLK_BUS_CSI] = &bus_csi_clk.common.hw,
[CLK_HDCP] = &hdcp_clk.common.hw,
[CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun50i_h6_ccu_resets[] = {
[RST_MBUS] = { 0x540, BIT(30) },
[RST_BUS_DE] = { 0x60c, BIT(16) },
[RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
[RST_BUS_GPU] = { 0x67c, BIT(16) },
[RST_BUS_CE] = { 0x68c, BIT(16) },
[RST_BUS_VE] = { 0x69c, BIT(16) },
[RST_BUS_EMCE] = { 0x6bc, BIT(16) },
[RST_BUS_VP9] = { 0x6cc, BIT(16) },
[RST_BUS_DMA] = { 0x70c, BIT(16) },
[RST_BUS_MSGBOX] = { 0x71c, BIT(16) },
[RST_BUS_SPINLOCK] = { 0x72c, BIT(16) },
[RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
[RST_BUS_DBG] = { 0x78c, BIT(16) },
[RST_BUS_PSI] = { 0x79c, BIT(16) },
[RST_BUS_PWM] = { 0x7ac, BIT(16) },
[RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
[RST_BUS_DRAM] = { 0x80c, BIT(16) },
[RST_BUS_NAND] = { 0x82c, BIT(16) },
[RST_BUS_MMC0] = { 0x84c, BIT(16) },
[RST_BUS_MMC1] = { 0x84c, BIT(17) },
[RST_BUS_MMC2] = { 0x84c, BIT(18) },
[RST_BUS_UART0] = { 0x90c, BIT(16) },
[RST_BUS_UART1] = { 0x90c, BIT(17) },
[RST_BUS_UART2] = { 0x90c, BIT(18) },
[RST_BUS_UART3] = { 0x90c, BIT(19) },
[RST_BUS_I2C0] = { 0x91c, BIT(16) },
[RST_BUS_I2C1] = { 0x91c, BIT(17) },
[RST_BUS_I2C2] = { 0x91c, BIT(18) },
[RST_BUS_I2C3] = { 0x91c, BIT(19) },
[RST_BUS_SCR0] = { 0x93c, BIT(16) },
[RST_BUS_SCR1] = { 0x93c, BIT(17) },
[RST_BUS_SPI0] = { 0x96c, BIT(16) },
[RST_BUS_SPI1] = { 0x96c, BIT(17) },
[RST_BUS_EMAC] = { 0x97c, BIT(16) },
[RST_BUS_TS] = { 0x9bc, BIT(16) },
[RST_BUS_IR_TX] = { 0x9cc, BIT(16) },
[RST_BUS_THS] = { 0x9fc, BIT(16) },
[RST_BUS_I2S0] = { 0xa1c, BIT(16) },
[RST_BUS_I2S1] = { 0xa1c, BIT(17) },
[RST_BUS_I2S2] = { 0xa1c, BIT(18) },
[RST_BUS_I2S3] = { 0xa1c, BIT(19) },
[RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
[RST_BUS_DMIC] = { 0xa4c, BIT(16) },
[RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
[RST_USB_PHY0] = { 0xa70, BIT(30) },
[RST_USB_PHY1] = { 0xa74, BIT(30) },
[RST_USB_PHY3] = { 0xa7c, BIT(30) },
[RST_USB_HSIC] = { 0xa7c, BIT(28) },
[RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
[RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
[RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
[RST_BUS_XHCI] = { 0xa8c, BIT(21) },
[RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
[RST_BUS_OTG] = { 0xa8c, BIT(24) },
[RST_BUS_PCIE] = { 0xabc, BIT(16) },
[RST_PCIE_POWERUP] = { 0xabc, BIT(17) },
[RST_BUS_HDMI] = { 0xb1c, BIT(16) },
[RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
[RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
[RST_BUS_TCON_LCD0] = { 0xb7c, BIT(16) },
[RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
[RST_BUS_CSI] = { 0xc2c, BIT(16) },
[RST_BUS_HDCP] = { 0xc4c, BIT(16) },
};
static const struct sunxi_ccu_desc sun50i_h6_ccu_desc = {
.ccu_clks = sun50i_h6_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_h6_ccu_clks),
.hw_clks = &sun50i_h6_hw_clks,
.resets = sun50i_h6_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_h6_ccu_resets),
};
static const u32 pll_regs[] = {
SUN50I_H6_PLL_CPUX_REG,
SUN50I_H6_PLL_DDR0_REG,
SUN50I_H6_PLL_PERIPH0_REG,
SUN50I_H6_PLL_PERIPH1_REG,
SUN50I_H6_PLL_GPU_REG,
SUN50I_H6_PLL_VIDEO0_REG,
SUN50I_H6_PLL_VIDEO1_REG,
SUN50I_H6_PLL_VE_REG,
SUN50I_H6_PLL_DE_REG,
SUN50I_H6_PLL_HSIC_REG,
SUN50I_H6_PLL_AUDIO_REG,
};
static const u32 pll_video_regs[] = {
SUN50I_H6_PLL_VIDEO0_REG,
SUN50I_H6_PLL_VIDEO1_REG,
};
static const u32 usb2_clk_regs[] = {
SUN50I_H6_USB0_CLK_REG,
SUN50I_H6_USB3_CLK_REG,
};
static int sun50i_h6_ccu_probe(struct platform_device *pdev)
{
struct resource *res;
void __iomem *reg;
u32 val;
int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(reg))
return PTR_ERR(reg);
/* Enable the lock bits on all PLLs */
for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
val = readl(reg + pll_regs[i]);
val |= BIT(29);
writel(val, reg + pll_regs[i]);
}
/*
* Force the output divider of video PLLs to 0.
*
* See the comment before pll-video0 definition for the reason.
*/
for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
val = readl(reg + pll_video_regs[i]);
val &= ~BIT(0);
writel(val, reg + pll_video_regs[i]);
}
/*
* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
*
* This clock mux is still mysterious, and the code just enforces
* it to have a valid clock parent.
*/
for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
val = readl(reg + usb2_clk_regs[i]);
val &= ~GENMASK(25, 24);
writel (val, reg + usb2_clk_regs[i]);
}
/*
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
* Force the post-divider of pll-audio to 12 and the output divider
* of it to 2, so 24576000 and 22579200 rates can be set exactly.
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
*/
val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
val &= ~(GENMASK(21, 16) | BIT(0));
clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL Audio devices needs exact clock rates in order to correctly reproduce the sound. Until now, only integer factors were used to configure H6 audio PLL which resulted in inexact rates. Fix that by adding support for fractional factors using sigma-delta modulation look-up table. It contains values for two most commonly used audio base frequencies. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-14 15:51:00 +02:00
writel(val | (11 << 16) | BIT(0), reg + SUN50I_H6_PLL_AUDIO_REG);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
clk: sunxi-ng: h6: Preset hdmi-cec clock parent H6 manual and BSP clock driver both states that hdmi-cec clock has two possible parents, osc32k and pll-periph0-2x with 36621 predivider. Because pll-periph0-2x is always 1.2 GHz, both parents give same hdmi-cec rate - 32768 Hz, which is exactly the rate needed for HDMI CEC controller to operate correctly. However, for some reason, HDMI CEC controller doesn't work if default parent (osc32k) is used. BSP HDMI driver also always use pll-periph0-2x as hdmi-cec clock parent. In order to solve the issue, preset hdmi-cec clock parent to pll-periph0-2x. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-04-02 23:06:22 +02:00
/*
* First clock parent (osc32K) is unusable for CEC. But since there
* is no good way to force parent switch (both run with same frequency),
* just set second clock parent here.
*/
val = readl(reg + SUN50I_H6_HDMI_CEC_CLK_REG);
val |= BIT(24);
writel(val, reg + SUN50I_H6_HDMI_CEC_CLK_REG);
clk: sunxi-ng: add support for the Allwinner H6 CCU The Allwinner H6 SoC has a CCU which has been largely rearranged. Add support for it in the sunxi-ng CCU framework. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-16 22:02:13 +08:00
return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
}
static const struct of_device_id sun50i_h6_ccu_ids[] = {
{ .compatible = "allwinner,sun50i-h6-ccu" },
{ }
};
static struct platform_driver sun50i_h6_ccu_driver = {
.probe = sun50i_h6_ccu_probe,
.driver = {
.name = "sun50i-h6-ccu",
.of_match_table = sun50i_h6_ccu_ids,
},
};
builtin_platform_driver(sun50i_h6_ccu_driver);
Reference in New Issue Copy Permalink