2019-05-19 15:08:55 +03:00
// SPDX-License-Identifier: GPL-2.0-only
2020-06-12 09:57:37 +03:00
# include <crypto/hash.h>
2014-02-06 04:11:33 +04:00
# include <linux/export.h>
2016-11-01 16:40:13 +03:00
# include <linux/bvec.h>
2020-10-16 06:13:50 +03:00
# include <linux/fault-inject-usercopy.h>
2014-02-06 04:11:33 +04:00
# include <linux/uio.h>
# include <linux/pagemap.h>
2021-05-05 04:40:03 +03:00
# include <linux/highmem.h>
2014-03-21 12:58:33 +04:00
# include <linux/slab.h>
# include <linux/vmalloc.h>
2016-09-22 23:33:12 +03:00
# include <linux/splice.h>
2020-09-25 07:51:40 +03:00
# include <linux/compat.h>
2014-11-24 09:08:00 +03:00
# include <net/checksum.h>
2018-12-04 04:52:09 +03:00
# include <linux/scatterlist.h>
2020-01-21 19:05:11 +03:00
# include <linux/instrumented.h>
2014-02-06 04:11:33 +04:00
2016-09-22 23:33:12 +03:00
# define PIPE_PARANOIA /* for now */
2022-05-22 21:59:25 +03:00
/* covers ubuf and kbuf alike */
# define iterate_buf(i, n, base, len, off, __p, STEP) { \
size_t __maybe_unused off = 0 ; \
len = n ; \
base = __p + i - > iov_offset ; \
len - = ( STEP ) ; \
i - > iov_offset + = len ; \
n = len ; \
}
2021-04-26 06:57:42 +03:00
/* covers iovec and kvec alike */
2021-05-02 20:03:41 +03:00
# define iterate_iovec(i, n, base, len, off, __p, STEP) { \
2021-05-02 18:35:03 +03:00
size_t off = 0 ; \
2021-05-02 20:03:41 +03:00
size_t skip = i - > iov_offset ; \
2021-04-26 06:46:09 +03:00
do { \
2021-05-02 18:35:03 +03:00
len = min ( n , __p - > iov_len - skip ) ; \
if ( likely ( len ) ) { \
base = __p - > iov_base + skip ; \
len - = ( STEP ) ; \
off + = len ; \
skip + = len ; \
n - = len ; \
2021-04-26 06:46:09 +03:00
if ( skip < __p - > iov_len ) \
break ; \
} \
__p + + ; \
skip = 0 ; \
} while ( n ) ; \
2021-05-02 20:03:41 +03:00
i - > iov_offset = skip ; \
2021-05-02 18:35:03 +03:00
n = off ; \
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
}
2021-05-02 20:03:41 +03:00
# define iterate_bvec(i, n, base, len, off, p, STEP) { \
2021-05-02 18:35:03 +03:00
size_t off = 0 ; \
2021-05-02 20:03:41 +03:00
unsigned skip = i - > iov_offset ; \
2021-04-27 03:19:14 +03:00
while ( n ) { \
unsigned offset = p - > bv_offset + skip ; \
2021-04-27 03:33:42 +03:00
unsigned left ; \
2021-04-27 03:50:05 +03:00
void * kaddr = kmap_local_page ( p - > bv_page + \
offset / PAGE_SIZE ) ; \
2021-05-02 18:35:03 +03:00
base = kaddr + offset % PAGE_SIZE ; \
2021-05-02 20:03:41 +03:00
len = min ( min ( n , ( size_t ) ( p - > bv_len - skip ) ) , \
2021-04-27 03:19:14 +03:00
( size_t ) ( PAGE_SIZE - offset % PAGE_SIZE ) ) ; \
2021-04-27 03:33:42 +03:00
left = ( STEP ) ; \
2021-04-27 03:50:05 +03:00
kunmap_local ( kaddr ) ; \
2021-05-02 18:35:03 +03:00
len - = left ; \
off + = len ; \
skip + = len ; \
2021-04-27 03:19:14 +03:00
if ( skip = = p - > bv_len ) { \
skip = 0 ; \
p + + ; \
} \
2021-05-02 18:35:03 +03:00
n - = len ; \
2021-04-27 03:33:42 +03:00
if ( left ) \
break ; \
2021-04-27 03:19:14 +03:00
} \
2021-05-02 20:03:41 +03:00
i - > iov_offset = skip ; \
2021-05-02 18:35:03 +03:00
n = off ; \
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
}
2021-05-02 20:03:41 +03:00
# define iterate_xarray(i, n, base, len, __off, STEP) { \
2021-04-27 03:33:42 +03:00
__label__ __out ; \
2021-05-02 18:13:09 +03:00
size_t __off = 0 ; \
2021-11-29 03:18:27 +03:00
struct folio * folio ; \
2021-05-02 20:03:41 +03:00
loff_t start = i - > xarray_start + i - > iov_offset ; \
2021-05-05 00:50:07 +03:00
pgoff_t index = start / PAGE_SIZE ; \
2020-02-10 13:00:21 +03:00
XA_STATE ( xas , i - > xarray , index ) ; \
\
2021-11-29 03:18:27 +03:00
len = PAGE_SIZE - offset_in_page ( start ) ; \
2021-05-02 18:35:03 +03:00
rcu_read_lock ( ) ; \
2021-11-29 03:18:27 +03:00
xas_for_each ( & xas , folio , ULONG_MAX ) { \
2021-05-02 18:35:03 +03:00
unsigned left ; \
2021-11-29 03:18:27 +03:00
size_t offset ; \
if ( xas_retry ( & xas , folio ) ) \
2021-05-02 18:35:03 +03:00
continue ; \
2021-11-29 03:18:27 +03:00
if ( WARN_ON ( xa_is_value ( folio ) ) ) \
2021-05-02 18:35:03 +03:00
break ; \
2021-11-29 03:18:27 +03:00
if ( WARN_ON ( folio_test_hugetlb ( folio ) ) ) \
2021-05-02 18:35:03 +03:00
break ; \
2021-11-29 03:18:27 +03:00
offset = offset_in_folio ( folio , start + __off ) ; \
while ( offset < folio_size ( folio ) ) { \
base = kmap_local_folio ( folio , offset ) ; \
2021-05-02 18:35:03 +03:00
len = min ( n , len ) ; \
left = ( STEP ) ; \
2021-11-29 03:18:27 +03:00
kunmap_local ( base ) ; \
2021-05-02 18:35:03 +03:00
len - = left ; \
__off + = len ; \
n - = len ; \
if ( left | | n = = 0 ) \
goto __out ; \
2021-11-29 03:18:27 +03:00
offset + = len ; \
len = PAGE_SIZE ; \
2021-05-02 18:35:03 +03:00
} \
2020-02-10 13:00:21 +03:00
} \
2021-04-27 03:33:42 +03:00
__out : \
2020-02-10 13:00:21 +03:00
rcu_read_unlock ( ) ; \
2021-11-29 03:18:27 +03:00
i - > iov_offset + = __off ; \
2021-05-02 18:13:09 +03:00
n = __off ; \
2020-02-10 13:00:21 +03:00
}
2021-05-02 18:35:03 +03:00
# define __iterate_and_advance(i, n, base, len, off, I, K) { \
2016-05-09 18:54:48 +03:00
if ( unlikely ( i - > count < n ) ) \
n = i - > count ; \
2021-04-29 03:59:08 +03:00
if ( likely ( n ) ) { \
2022-05-22 21:59:25 +03:00
if ( likely ( iter_is_ubuf ( i ) ) ) { \
void __user * base ; \
size_t len ; \
iterate_buf ( i , n , base , len , off , \
i - > ubuf , ( I ) ) \
} else if ( likely ( iter_is_iovec ( i ) ) ) { \
2021-04-26 06:57:42 +03:00
const struct iovec * iov = i - > iov ; \
2021-05-02 18:35:03 +03:00
void __user * base ; \
size_t len ; \
iterate_iovec ( i , n , base , len , off , \
2021-05-02 20:03:41 +03:00
iov , ( I ) ) \
2021-06-03 00:25:59 +03:00
i - > nr_segs - = iov - i - > iov ; \
i - > iov = iov ; \
} else if ( iov_iter_is_bvec ( i ) ) { \
2016-05-30 16:34:32 +03:00
const struct bio_vec * bvec = i - > bvec ; \
2021-05-02 18:35:03 +03:00
void * base ; \
size_t len ; \
iterate_bvec ( i , n , base , len , off , \
2021-05-02 20:03:41 +03:00
bvec , ( K ) ) \
2021-04-27 03:19:14 +03:00
i - > nr_segs - = bvec - i - > bvec ; \
i - > bvec = bvec ; \
2021-06-03 00:25:59 +03:00
} else if ( iov_iter_is_kvec ( i ) ) { \
2021-04-26 06:57:42 +03:00
const struct kvec * kvec = i - > kvec ; \
2021-05-02 18:35:03 +03:00
void * base ; \
size_t len ; \
iterate_iovec ( i , n , base , len , off , \
2021-05-02 20:03:41 +03:00
kvec , ( K ) ) \
2016-05-09 18:54:48 +03:00
i - > nr_segs - = kvec - i - > kvec ; \
i - > kvec = kvec ; \
2021-06-03 00:25:59 +03:00
} else if ( iov_iter_is_xarray ( i ) ) { \
2021-05-02 18:35:03 +03:00
void * base ; \
size_t len ; \
iterate_xarray ( i , n , base , len , off , \
2021-05-02 20:03:41 +03:00
( K ) ) \
2014-11-27 21:59:45 +03:00
} \
2016-05-09 18:54:48 +03:00
i - > count - = n ; \
2014-11-27 21:59:45 +03:00
} \
}
2021-05-02 18:35:03 +03:00
# define iterate_and_advance(i, n, base, len, off, I, K) \
__iterate_and_advance ( i , n , base , len , off , I , ( ( void ) ( K ) , 0 ) )
2014-11-27 21:59:45 +03:00
2017-06-30 05:25:14 +03:00
static int copyout ( void __user * to , const void * from , size_t n )
{
2020-10-16 06:13:50 +03:00
if ( should_fail_usercopy ( ) )
return n ;
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if ( access_ok ( to , n ) ) {
2020-01-21 19:05:11 +03:00
instrument_copy_to_user ( to , from , n ) ;
2017-06-30 05:25:14 +03:00
n = raw_copy_to_user ( to , from , n ) ;
}
return n ;
}
static int copyin ( void * to , const void __user * from , size_t n )
{
2022-09-15 18:03:37 +03:00
size_t res = n ;
2020-10-16 06:13:50 +03:00
if ( should_fail_usercopy ( ) )
return n ;
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if ( access_ok ( from , n ) ) {
2022-09-15 18:03:37 +03:00
instrument_copy_from_user_before ( to , from , n ) ;
res = raw_copy_from_user ( to , from , n ) ;
instrument_copy_from_user_after ( to , from , n , res ) ;
2017-06-30 05:25:14 +03:00
}
2022-09-15 18:03:37 +03:00
return res ;
2017-06-30 05:25:14 +03:00
}
2022-06-14 17:24:37 +03:00
static inline struct pipe_buffer * pipe_buf ( const struct pipe_inode_info * pipe ,
unsigned int slot )
{
return & pipe - > bufs [ slot & ( pipe - > ring_size - 1 ) ] ;
}
2016-09-22 23:33:12 +03:00
# ifdef PIPE_PARANOIA
static bool sanity ( const struct iov_iter * i )
{
struct pipe_inode_info * pipe = i - > pipe ;
2019-11-15 16:30:32 +03:00
unsigned int p_head = pipe - > head ;
unsigned int p_tail = pipe - > tail ;
unsigned int p_occupancy = pipe_occupancy ( p_head , p_tail ) ;
unsigned int i_head = i - > head ;
unsigned int idx ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( i - > last_offset ) {
2016-09-22 23:33:12 +03:00
struct pipe_buffer * p ;
2019-11-15 16:30:32 +03:00
if ( unlikely ( p_occupancy = = 0 ) )
2016-09-22 23:33:12 +03:00
goto Bad ; // pipe must be non-empty
2019-11-15 16:30:32 +03:00
if ( unlikely ( i_head ! = p_head - 1 ) )
2016-09-22 23:33:12 +03:00
goto Bad ; // must be at the last buffer...
2022-06-14 17:24:37 +03:00
p = pipe_buf ( pipe , i_head ) ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( unlikely ( p - > offset + p - > len ! = abs ( i - > last_offset ) ) )
2016-09-22 23:33:12 +03:00
goto Bad ; // ... at the end of segment
} else {
2019-11-15 16:30:32 +03:00
if ( i_head ! = p_head )
2016-09-22 23:33:12 +03:00
goto Bad ; // must be right after the last buffer
}
return true ;
Bad :
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
printk ( KERN_ERR " idx = %d, offset = %d \n " , i_head , i - > last_offset ) ;
2019-11-15 16:30:32 +03:00
printk ( KERN_ERR " head = %d, tail = %d, buffers = %d \n " ,
p_head , p_tail , pipe - > ring_size ) ;
for ( idx = 0 ; idx < pipe - > ring_size ; idx + + )
2016-09-22 23:33:12 +03:00
printk ( KERN_ERR " [%p %p %d %d] \n " ,
pipe - > bufs [ idx ] . ops ,
pipe - > bufs [ idx ] . page ,
pipe - > bufs [ idx ] . offset ,
pipe - > bufs [ idx ] . len ) ;
WARN_ON ( 1 ) ;
return false ;
}
# else
# define sanity(i) true
# endif
2022-06-13 21:30:15 +03:00
static struct page * push_anon ( struct pipe_inode_info * pipe , unsigned size )
{
struct page * page = alloc_page ( GFP_USER ) ;
if ( page ) {
struct pipe_buffer * buf = pipe_buf ( pipe , pipe - > head + + ) ;
* buf = ( struct pipe_buffer ) {
. ops = & default_pipe_buf_ops ,
. page = page ,
. offset = 0 ,
. len = size
} ;
}
return page ;
}
static void push_page ( struct pipe_inode_info * pipe , struct page * page ,
unsigned int offset , unsigned int size )
{
struct pipe_buffer * buf = pipe_buf ( pipe , pipe - > head + + ) ;
* buf = ( struct pipe_buffer ) {
. ops = & page_cache_pipe_buf_ops ,
. page = page ,
. offset = offset ,
. len = size
} ;
get_page ( page ) ;
}
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
static inline int last_offset ( const struct pipe_buffer * buf )
2022-06-14 20:53:53 +03:00
{
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( buf - > ops = = & default_pipe_buf_ops )
return buf - > len ; // buf->offset is 0 for those
else
return - ( buf - > offset + buf - > len ) ;
2022-06-14 20:53:53 +03:00
}
static struct page * append_pipe ( struct iov_iter * i , size_t size ,
unsigned int * off )
{
struct pipe_inode_info * pipe = i - > pipe ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
int offset = i - > last_offset ;
2022-06-14 20:53:53 +03:00
struct pipe_buffer * buf ;
struct page * page ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( offset > 0 & & offset < PAGE_SIZE ) {
// some space in the last buffer; add to it
2022-06-14 20:53:53 +03:00
buf = pipe_buf ( pipe , pipe - > head - 1 ) ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
size = min_t ( size_t , size , PAGE_SIZE - offset ) ;
buf - > len + = size ;
i - > last_offset + = size ;
i - > count - = size ;
* off = offset ;
return buf - > page ;
2022-06-14 20:53:53 +03:00
}
// OK, we need a new buffer
* off = 0 ;
size = min_t ( size_t , size , PAGE_SIZE ) ;
if ( pipe_full ( pipe - > head , pipe - > tail , pipe - > max_usage ) )
return NULL ;
page = push_anon ( pipe , size ) ;
if ( ! page )
return NULL ;
i - > head = pipe - > head - 1 ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset = size ;
2022-06-14 20:53:53 +03:00
i - > count - = size ;
return page ;
}
2016-09-22 23:33:12 +03:00
static size_t copy_page_to_iter_pipe ( struct page * page , size_t offset , size_t bytes ,
struct iov_iter * i )
{
struct pipe_inode_info * pipe = i - > pipe ;
2022-06-13 21:30:15 +03:00
unsigned int head = pipe - > head ;
2016-09-22 23:33:12 +03:00
if ( unlikely ( bytes > i - > count ) )
bytes = i - > count ;
if ( unlikely ( ! bytes ) )
return 0 ;
if ( ! sanity ( i ) )
return 0 ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( offset & & i - > last_offset = = - offset ) { // could we merge it?
2022-06-13 21:30:15 +03:00
struct pipe_buffer * buf = pipe_buf ( pipe , head - 1 ) ;
if ( buf - > page = = page ) {
2016-09-22 23:33:12 +03:00
buf - > len + = bytes ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset - = bytes ;
2022-06-13 21:30:15 +03:00
i - > count - = bytes ;
return bytes ;
2016-09-22 23:33:12 +03:00
}
}
2022-06-13 21:30:15 +03:00
if ( pipe_full ( pipe - > head , pipe - > tail , pipe - > max_usage ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2019-11-15 16:30:32 +03:00
2022-06-13 21:30:15 +03:00
push_page ( pipe , page , offset , bytes ) ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset = - ( offset + bytes ) ;
2022-06-13 21:30:15 +03:00
i - > head = head ;
2016-09-22 23:33:12 +03:00
i - > count - = bytes ;
return bytes ;
}
2015-03-11 17:43:31 +03:00
/*
2021-08-02 15:54:16 +03:00
* fault_in_iov_iter_readable - fault in iov iterator for reading
* @ i : iterator
* @ size : maximum length
*
2015-03-11 17:43:31 +03:00
* Fault in one or more iovecs of the given iov_iter , to a maximum length of
2021-08-02 15:54:16 +03:00
* @ size . For each iovec , fault in each page that constitutes the iovec .
*
* Returns the number of bytes not faulted in ( like copy_to_user ( ) and
* copy_from_user ( ) ) .
2015-03-11 17:43:31 +03:00
*
2021-08-02 15:54:16 +03:00
* Always returns 0 for non - userspace iterators .
2015-03-11 17:43:31 +03:00
*/
2021-08-02 15:54:16 +03:00
size_t fault_in_iov_iter_readable ( const struct iov_iter * i , size_t size )
2015-03-11 17:43:31 +03:00
{
2022-05-22 21:59:25 +03:00
if ( iter_is_ubuf ( i ) ) {
size_t n = min ( size , iov_iter_count ( i ) ) ;
n - = fault_in_readable ( i - > ubuf + i - > iov_offset , n ) ;
return size - n ;
} else if ( iter_is_iovec ( i ) ) {
2021-08-02 15:54:16 +03:00
size_t count = min ( size , iov_iter_count ( i ) ) ;
2021-05-02 18:57:37 +03:00
const struct iovec * p ;
size_t skip ;
2021-08-02 15:54:16 +03:00
size - = count ;
for ( p = i - > iov , skip = i - > iov_offset ; count ; p + + , skip = 0 ) {
size_t len = min ( count , p - > iov_len - skip ) ;
size_t ret ;
2021-05-02 18:57:37 +03:00
if ( unlikely ( ! len ) )
continue ;
2021-08-02 15:54:16 +03:00
ret = fault_in_readable ( p - > iov_base + skip , len ) ;
count - = len - ret ;
if ( ret )
break ;
2021-05-02 18:57:37 +03:00
}
2021-08-02 15:54:16 +03:00
return count + size ;
2015-03-11 17:43:31 +03:00
}
return 0 ;
}
2021-08-02 15:54:16 +03:00
EXPORT_SYMBOL ( fault_in_iov_iter_readable ) ;
2015-03-11 17:43:31 +03:00
2021-07-05 18:26:28 +03:00
/*
* fault_in_iov_iter_writeable - fault in iov iterator for writing
* @ i : iterator
* @ size : maximum length
*
* Faults in the iterator using get_user_pages ( ) , i . e . , without triggering
* hardware page faults . This is primarily useful when we already know that
* some or all of the pages in @ i aren ' t in memory .
*
* Returns the number of bytes not faulted in , like copy_to_user ( ) and
* copy_from_user ( ) .
*
* Always returns 0 for non - user - space iterators .
*/
size_t fault_in_iov_iter_writeable ( const struct iov_iter * i , size_t size )
{
2022-05-22 21:59:25 +03:00
if ( iter_is_ubuf ( i ) ) {
size_t n = min ( size , iov_iter_count ( i ) ) ;
n - = fault_in_safe_writeable ( i - > ubuf + i - > iov_offset , n ) ;
return size - n ;
} else if ( iter_is_iovec ( i ) ) {
2021-07-05 18:26:28 +03:00
size_t count = min ( size , iov_iter_count ( i ) ) ;
const struct iovec * p ;
size_t skip ;
size - = count ;
for ( p = i - > iov , skip = i - > iov_offset ; count ; p + + , skip = 0 ) {
size_t len = min ( count , p - > iov_len - skip ) ;
size_t ret ;
if ( unlikely ( ! len ) )
continue ;
ret = fault_in_safe_writeable ( p - > iov_base + skip , len ) ;
count - = len - ret ;
if ( ret )
break ;
}
return count + size ;
}
return 0 ;
}
EXPORT_SYMBOL ( fault_in_iov_iter_writeable ) ;
2018-10-20 02:57:56 +03:00
void iov_iter_init ( struct iov_iter * i , unsigned int direction ,
2014-03-06 04:28:09 +04:00
const struct iovec * iov , unsigned long nr_segs ,
size_t count )
{
2018-10-20 02:57:56 +03:00
WARN_ON ( direction & ~ ( READ | WRITE ) ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_IOVEC ,
2021-07-12 13:06:14 +03:00
. nofault = false ,
2022-05-22 21:59:25 +03:00
. user_backed = true ,
2021-04-22 21:50:39 +03:00
. data_source = direction ,
. iov = iov ,
. nr_segs = nr_segs ,
. iov_offset = 0 ,
. count = count
} ;
2014-03-06 04:28:09 +04:00
}
EXPORT_SYMBOL ( iov_iter_init ) ;
2014-03-15 12:05:57 +04:00
2022-06-15 16:44:38 +03:00
// returns the offset in partial buffer (if any)
static inline unsigned int pipe_npages ( const struct iov_iter * i , int * npages )
2016-09-22 23:33:12 +03:00
{
2022-06-15 16:44:38 +03:00
struct pipe_inode_info * pipe = i - > pipe ;
int used = pipe - > head - pipe - > tail ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
int off = i - > last_offset ;
2019-11-15 16:30:32 +03:00
2022-06-15 16:44:38 +03:00
* npages = max ( ( int ) pipe - > max_usage - used , 0 ) ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( off > 0 & & off < PAGE_SIZE ) { // anon and not full
2022-06-15 16:44:38 +03:00
( * npages ) + + ;
return off ;
2016-09-22 23:33:12 +03:00
}
2022-06-15 16:44:38 +03:00
return 0 ;
2016-09-22 23:33:12 +03:00
}
static size_t copy_pipe_to_iter ( const void * addr , size_t bytes ,
struct iov_iter * i )
{
2022-06-14 20:53:53 +03:00
unsigned int off , chunk ;
2016-09-22 23:33:12 +03:00
2022-06-14 20:53:53 +03:00
if ( unlikely ( bytes > i - > count ) )
bytes = i - > count ;
if ( unlikely ( ! bytes ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-06-14 20:53:53 +03:00
if ( ! sanity ( i ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-06-14 20:53:53 +03:00
for ( size_t n = bytes ; n ; n - = chunk ) {
struct page * page = append_pipe ( i , n , & off ) ;
chunk = min_t ( size_t , n , PAGE_SIZE - off ) ;
if ( ! page )
return bytes - n ;
memcpy_to_page ( page , off , addr , chunk ) ;
2016-09-22 23:33:12 +03:00
addr + = chunk ;
2022-06-14 20:53:53 +03:00
}
2016-09-22 23:33:12 +03:00
return bytes ;
}
2018-11-28 06:32:59 +03:00
static __wsum csum_and_memcpy ( void * to , const void * from , size_t len ,
__wsum sum , size_t off )
{
2020-07-11 07:12:07 +03:00
__wsum next = csum_partial_copy_nocheck ( from , to , len ) ;
2018-11-28 06:32:59 +03:00
return csum_block_add ( sum , next , off ) ;
}
2018-11-26 00:24:16 +03:00
static size_t csum_and_copy_to_pipe_iter ( const void * addr , size_t bytes ,
2021-05-03 00:24:40 +03:00
struct iov_iter * i , __wsum * sump )
2018-11-26 00:24:16 +03:00
{
2021-05-03 00:24:40 +03:00
__wsum sum = * sump ;
size_t off = 0 ;
2022-06-14 20:53:53 +03:00
unsigned int chunk , r ;
if ( unlikely ( bytes > i - > count ) )
bytes = i - > count ;
if ( unlikely ( ! bytes ) )
return 0 ;
2018-11-26 00:24:16 +03:00
if ( ! sanity ( i ) )
return 0 ;
2021-05-03 00:24:40 +03:00
while ( bytes ) {
2022-06-14 20:53:53 +03:00
struct page * page = append_pipe ( i , bytes , & r ) ;
char * p ;
if ( ! page )
break ;
chunk = min_t ( size_t , bytes , PAGE_SIZE - r ) ;
p = kmap_local_page ( page ) ;
2021-05-03 00:24:40 +03:00
sum = csum_and_memcpy ( p + r , addr + off , chunk , sum , off ) ;
2021-04-30 20:40:48 +03:00
kunmap_local ( p ) ;
2018-11-26 00:24:16 +03:00
off + = chunk ;
2022-06-14 20:53:53 +03:00
bytes - = chunk ;
2021-05-03 00:24:40 +03:00
}
* sump = sum ;
return off ;
2018-11-26 00:24:16 +03:00
}
2017-06-30 04:45:10 +03:00
size_t _copy_to_iter ( const void * addr , size_t bytes , struct iov_iter * i )
2014-04-05 07:12:29 +04:00
{
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( i - > data_source ) )
return 0 ;
2018-10-22 15:07:28 +03:00
if ( unlikely ( iov_iter_is_pipe ( i ) ) )
2016-09-22 23:33:12 +03:00
return copy_pipe_to_iter ( addr , bytes , i ) ;
2022-05-22 21:59:25 +03:00
if ( user_backed_iter ( i ) )
2017-06-30 05:25:14 +03:00
might_fault ( ) ;
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off ,
copyout ( base , addr + off , len ) ,
memcpy ( base , addr + off , len )
2014-11-27 22:28:06 +03:00
)
2014-04-05 07:12:29 +04:00
2014-11-27 22:28:06 +03:00
return bytes ;
2014-08-01 17:27:22 +04:00
}
2017-06-30 04:45:10 +03:00
EXPORT_SYMBOL ( _copy_to_iter ) ;
2014-08-01 17:27:22 +04:00
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
# ifdef CONFIG_ARCH_HAS_COPY_MC
static int copyout_mc ( void __user * to , const void * from , size_t n )
2018-05-04 03:06:31 +03:00
{
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if ( access_ok ( to , n ) ) {
2020-01-21 19:05:11 +03:00
instrument_copy_to_user ( to , from , n ) ;
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
n = copy_mc_to_user ( ( __force void * ) to , from , n ) ;
2018-05-04 03:06:31 +03:00
}
return n ;
}
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
static size_t copy_mc_pipe_to_iter ( const void * addr , size_t bytes ,
2018-07-08 23:46:12 +03:00
struct iov_iter * i )
{
2022-06-14 20:53:53 +03:00
size_t xfer = 0 ;
unsigned int off , chunk ;
if ( unlikely ( bytes > i - > count ) )
bytes = i - > count ;
if ( unlikely ( ! bytes ) )
return 0 ;
2018-07-08 23:46:12 +03:00
if ( ! sanity ( i ) )
return 0 ;
2022-06-14 20:53:53 +03:00
while ( bytes ) {
struct page * page = append_pipe ( i , bytes , & off ) ;
2018-07-08 23:46:12 +03:00
unsigned long rem ;
2022-06-14 20:53:53 +03:00
char * p ;
if ( ! page )
break ;
chunk = min_t ( size_t , bytes , PAGE_SIZE - off ) ;
p = kmap_local_page ( page ) ;
2021-05-03 00:16:34 +03:00
rem = copy_mc_to_kernel ( p + off , addr + xfer , chunk ) ;
chunk - = rem ;
kunmap_local ( p ) ;
2022-06-14 20:53:53 +03:00
xfer + = chunk ;
bytes - = chunk ;
2022-06-13 02:50:29 +03:00
if ( rem ) {
2022-06-14 20:53:53 +03:00
iov_iter_revert ( i , rem ) ;
2018-07-08 23:46:12 +03:00
break ;
2022-06-13 02:50:29 +03:00
}
2021-05-03 00:16:34 +03:00
}
2018-07-08 23:46:12 +03:00
return xfer ;
}
2018-07-08 23:46:02 +03:00
/**
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
* _copy_mc_to_iter - copy to iter with source memory error exception handling
2018-07-08 23:46:02 +03:00
* @ addr : source kernel address
* @ bytes : total transfer length
2021-09-08 05:58:54 +03:00
* @ i : destination iterator
2018-07-08 23:46:02 +03:00
*
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
* The pmem driver deploys this for the dax operation
* ( dax_copy_to_iter ( ) ) for dax reads ( bypass page - cache and the
* block - layer ) . Upon # MC read ( 2 ) aborts and returns EIO or the bytes
* successfully copied .
2018-07-08 23:46:02 +03:00
*
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
* The main differences between this and typical _copy_to_iter ( ) .
2018-07-08 23:46:02 +03:00
*
* * Typical tail / residue handling after a fault retries the copy
* byte - by - byte until the fault happens again . Re - triggering machine
* checks is potentially fatal so the implementation uses source
* alignment and poison alignment assumptions to avoid re - triggering
* hardware exceptions .
*
* * ITER_KVEC , ITER_PIPE , and ITER_BVEC can return short copies .
* Compare to copy_to_iter ( ) where only ITER_IOVEC attempts might return
* a short copy .
2021-09-08 05:58:54 +03:00
*
* Return : number of bytes copied ( may be % 0 )
2018-07-08 23:46:02 +03:00
*/
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
size_t _copy_mc_to_iter ( const void * addr , size_t bytes , struct iov_iter * i )
2018-05-04 03:06:31 +03:00
{
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( i - > data_source ) )
return 0 ;
2018-10-22 15:07:28 +03:00
if ( unlikely ( iov_iter_is_pipe ( i ) ) )
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
return copy_mc_pipe_to_iter ( addr , bytes , i ) ;
2022-05-22 21:59:25 +03:00
if ( user_backed_iter ( i ) )
2018-05-04 03:06:31 +03:00
might_fault ( ) ;
2021-05-02 18:35:03 +03:00
__iterate_and_advance ( i , bytes , base , len , off ,
copyout_mc ( base , addr + off , len ) ,
copy_mc_to_kernel ( base , addr + off , len )
2018-05-04 03:06:31 +03:00
)
return bytes ;
}
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
2020-10-06 06:40:16 +03:00
EXPORT_SYMBOL_GPL ( _copy_mc_to_iter ) ;
# endif /* CONFIG_ARCH_HAS_COPY_MC */
2018-05-04 03:06:31 +03:00
2017-06-30 04:45:10 +03:00
size_t _copy_from_iter ( void * addr , size_t bytes , struct iov_iter * i )
2014-08-01 17:27:22 +04:00
{
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( ! i - > data_source ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-09-16 03:11:15 +03:00
2022-05-22 21:59:25 +03:00
if ( user_backed_iter ( i ) )
2017-06-30 05:25:14 +03:00
might_fault ( ) ;
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off ,
copyin ( addr + off , base , len ) ,
memcpy ( addr + off , base , len )
2014-11-27 22:26:43 +03:00
)
return bytes ;
2014-08-01 17:27:22 +04:00
}
2017-06-30 04:45:10 +03:00
EXPORT_SYMBOL ( _copy_from_iter ) ;
2014-08-01 17:27:22 +04:00
2017-06-30 04:45:10 +03:00
size_t _copy_from_iter_nocache ( void * addr , size_t bytes , struct iov_iter * i )
2014-11-28 04:27:08 +03:00
{
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( ! i - > data_source ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-09-16 03:11:15 +03:00
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off ,
__copy_from_user_inatomic_nocache ( addr + off , base , len ) ,
memcpy ( addr + off , base , len )
2014-11-28 04:27:08 +03:00
)
return bytes ;
}
2017-06-30 04:45:10 +03:00
EXPORT_SYMBOL ( _copy_from_iter_nocache ) ;
2014-11-28 04:27:08 +03:00
2017-05-29 22:22:50 +03:00
# ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
2018-07-08 23:46:07 +03:00
/**
* _copy_from_iter_flushcache - write destination through cpu cache
* @ addr : destination kernel address
* @ bytes : total transfer length
2021-09-08 05:58:54 +03:00
* @ i : source iterator
2018-07-08 23:46:07 +03:00
*
* The pmem driver arranges for filesystem - dax to use this facility via
* dax_copy_from_iter ( ) for ensuring that writes to persistent memory
* are flushed through the CPU cache . It is differentiated from
* _copy_from_iter_nocache ( ) in that guarantees all data is flushed for
* all iterator types . The _copy_from_iter_nocache ( ) only attempts to
* bypass the cache for the ITER_IOVEC case , and on some archs may use
* instructions that strand dirty - data in the cache .
2021-09-08 05:58:54 +03:00
*
* Return : number of bytes copied ( may be % 0 )
2018-07-08 23:46:07 +03:00
*/
Merge branch 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter hardening from Al Viro:
"This is the iov_iter/uaccess/hardening pile.
For one thing, it trims the inline part of copy_to_user/copy_from_user
to the minimum that *does* need to be inlined - object size checks,
basically. For another, it sanitizes the checks for iov_iter
primitives. There are 4 groups of checks: access_ok(), might_fault(),
object size and KASAN.
- access_ok() had been verified by whoever had set the iov_iter up.
However, that has happened in a function far away, so proving that
there's no path to actual copying bypassing those checks is hard
and proving that iov_iter has not been buggered in the meanwhile is
also not pleasant. So we want those redone in actual
copyin/copyout.
- might_fault() is better off consolidated - we know whether it needs
to be checked as soon as we enter iov_iter primitive and observe
the iov_iter flavour. No need to wait until the copyin/copyout. The
call chains are short enough to make sure we won't miss anything -
in fact, it's more robust that way, since there are cases where we
do e.g. forced fault-in before getting to copyin/copyout. It's not
quite what we need to check (in particular, combination of
iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
cause to skip checks), but that's for later series. For now let's
keep might_fault().
- KASAN checks belong in copyin/copyout - at the same level where
other iov_iter flavours would've hit them in memcpy().
- object size checks should apply to *all* iov_iter flavours, not
just iovec-backed ones.
There are two groups of primitives - one gets the kernel object
described as pointer + size (copy_to_iter(), etc.) while another gets
it as page + offset + size (copy_page_to_iter(), etc.)
For the first group the checks are best done where we actually have a
chance to find the object size. In other words, those belong in inline
wrappers in uio.h, before calling into iov_iter.c. Same kind as we
have for inlined part of copy_to_user().
For the second group there is no object to look at - offset in page is
just a number, it bears no type information. So we do them in the
common helper called by iov_iter.c primitives of that kind. All it
currently does is checking that we are not trying to access outside of
the compound page; eventually we might want to add some sanity checks
on the page involved.
So the things we need in copyin/copyout part of iov_iter.c do not
quite match anything in uaccess.h (we want no zeroing, we *do* want
access_ok() and KASAN and we want no might_fault() or object size
checks done on that level). OTOH, these needs are simple enough to
provide a couple of helpers (static in iov_iter.c) doing just what we
need..."
* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: saner checks on copyin/copyout
iov_iter: sanity checks for copy to/from page primitives
iov_iter/hardening: move object size checks to inlined part
copy_{to,from}_user(): consolidate object size checks
copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
2017-07-08 06:39:20 +03:00
size_t _copy_from_iter_flushcache ( void * addr , size_t bytes , struct iov_iter * i )
2017-05-29 22:22:50 +03:00
{
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( ! i - > data_source ) )
2017-05-29 22:22:50 +03:00
return 0 ;
2022-09-16 03:11:15 +03:00
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off ,
__copy_from_user_flushcache ( addr + off , base , len ) ,
memcpy_flushcache ( addr + off , base , len )
2017-05-29 22:22:50 +03:00
)
return bytes ;
}
Merge branch 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter hardening from Al Viro:
"This is the iov_iter/uaccess/hardening pile.
For one thing, it trims the inline part of copy_to_user/copy_from_user
to the minimum that *does* need to be inlined - object size checks,
basically. For another, it sanitizes the checks for iov_iter
primitives. There are 4 groups of checks: access_ok(), might_fault(),
object size and KASAN.
- access_ok() had been verified by whoever had set the iov_iter up.
However, that has happened in a function far away, so proving that
there's no path to actual copying bypassing those checks is hard
and proving that iov_iter has not been buggered in the meanwhile is
also not pleasant. So we want those redone in actual
copyin/copyout.
- might_fault() is better off consolidated - we know whether it needs
to be checked as soon as we enter iov_iter primitive and observe
the iov_iter flavour. No need to wait until the copyin/copyout. The
call chains are short enough to make sure we won't miss anything -
in fact, it's more robust that way, since there are cases where we
do e.g. forced fault-in before getting to copyin/copyout. It's not
quite what we need to check (in particular, combination of
iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
cause to skip checks), but that's for later series. For now let's
keep might_fault().
- KASAN checks belong in copyin/copyout - at the same level where
other iov_iter flavours would've hit them in memcpy().
- object size checks should apply to *all* iov_iter flavours, not
just iovec-backed ones.
There are two groups of primitives - one gets the kernel object
described as pointer + size (copy_to_iter(), etc.) while another gets
it as page + offset + size (copy_page_to_iter(), etc.)
For the first group the checks are best done where we actually have a
chance to find the object size. In other words, those belong in inline
wrappers in uio.h, before calling into iov_iter.c. Same kind as we
have for inlined part of copy_to_user().
For the second group there is no object to look at - offset in page is
just a number, it bears no type information. So we do them in the
common helper called by iov_iter.c primitives of that kind. All it
currently does is checking that we are not trying to access outside of
the compound page; eventually we might want to add some sanity checks
on the page involved.
So the things we need in copyin/copyout part of iov_iter.c do not
quite match anything in uaccess.h (we want no zeroing, we *do* want
access_ok() and KASAN and we want no might_fault() or object size
checks done on that level). OTOH, these needs are simple enough to
provide a couple of helpers (static in iov_iter.c) doing just what we
need..."
* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: saner checks on copyin/copyout
iov_iter: sanity checks for copy to/from page primitives
iov_iter/hardening: move object size checks to inlined part
copy_{to,from}_user(): consolidate object size checks
copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
2017-07-08 06:39:20 +03:00
EXPORT_SYMBOL_GPL ( _copy_from_iter_flushcache ) ;
2017-05-29 22:22:50 +03:00
# endif
2017-06-30 04:52:57 +03:00
static inline bool page_copy_sane ( struct page * page , size_t offset , size_t n )
{
2019-02-26 21:42:39 +03:00
struct page * head ;
size_t v = n + offset ;
/*
* The general case needs to access the page order in order
* to compute the page size .
* However , we mostly deal with order - 0 pages and thus can
* avoid a possible cache line miss for requests that fit all
* page orders .
*/
if ( n < = v & & v < = PAGE_SIZE )
return true ;
head = compound_head ( page ) ;
v + = ( page - head ) < < PAGE_SHIFT ;
2017-08-29 21:20:32 +03:00
2022-07-29 20:01:57 +03:00
if ( WARN_ON ( n > v | | v > page_size ( head ) ) )
return false ;
return true ;
2017-06-30 04:52:57 +03:00
}
2016-11-02 05:09:04 +03:00
2021-04-30 03:42:25 +03:00
size_t copy_page_to_iter ( struct page * page , size_t offset , size_t bytes ,
struct iov_iter * i )
{
size_t res = 0 ;
2022-07-29 20:01:57 +03:00
if ( ! page_copy_sane ( page , offset , bytes ) )
2021-04-30 03:42:25 +03:00
return 0 ;
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( i - > data_source ) )
return 0 ;
2022-06-24 00:21:37 +03:00
if ( unlikely ( iov_iter_is_pipe ( i ) ) )
return copy_page_to_iter_pipe ( page , offset , bytes , i ) ;
2021-04-30 03:42:25 +03:00
page + = offset / PAGE_SIZE ; // first subpage
offset % = PAGE_SIZE ;
while ( 1 ) {
2022-06-24 00:21:37 +03:00
void * kaddr = kmap_local_page ( page ) ;
size_t n = min ( bytes , ( size_t ) PAGE_SIZE - offset ) ;
n = _copy_to_iter ( kaddr + offset , n , i ) ;
kunmap_local ( kaddr ) ;
2021-04-30 03:42:25 +03:00
res + = n ;
bytes - = n ;
if ( ! bytes | | ! n )
break ;
offset + = n ;
if ( offset = = PAGE_SIZE ) {
page + + ;
offset = 0 ;
}
}
return res ;
}
2014-04-05 07:12:29 +04:00
EXPORT_SYMBOL ( copy_page_to_iter ) ;
size_t copy_page_from_iter ( struct page * page , size_t offset , size_t bytes ,
struct iov_iter * i )
{
2022-07-29 19:54:53 +03:00
size_t res = 0 ;
if ( ! page_copy_sane ( page , offset , bytes ) )
return 0 ;
page + = offset / PAGE_SIZE ; // first subpage
offset % = PAGE_SIZE ;
while ( 1 ) {
2021-04-27 19:33:24 +03:00
void * kaddr = kmap_local_page ( page ) ;
2022-07-29 19:54:53 +03:00
size_t n = min ( bytes , ( size_t ) PAGE_SIZE - offset ) ;
n = _copy_from_iter ( kaddr + offset , n , i ) ;
2021-04-27 19:33:24 +03:00
kunmap_local ( kaddr ) ;
2022-07-29 19:54:53 +03:00
res + = n ;
bytes - = n ;
if ( ! bytes | | ! n )
break ;
offset + = n ;
if ( offset = = PAGE_SIZE ) {
page + + ;
offset = 0 ;
}
2021-06-03 00:25:59 +03:00
}
2022-07-29 19:54:53 +03:00
return res ;
2014-04-05 07:12:29 +04:00
}
EXPORT_SYMBOL ( copy_page_from_iter ) ;
2016-09-22 23:33:12 +03:00
static size_t pipe_zero ( size_t bytes , struct iov_iter * i )
{
2022-06-14 20:53:53 +03:00
unsigned int chunk , off ;
2016-09-22 23:33:12 +03:00
2022-06-14 20:53:53 +03:00
if ( unlikely ( bytes > i - > count ) )
bytes = i - > count ;
if ( unlikely ( ! bytes ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-06-14 20:53:53 +03:00
if ( ! sanity ( i ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-06-14 20:53:53 +03:00
for ( size_t n = bytes ; n ; n - = chunk ) {
struct page * page = append_pipe ( i , n , & off ) ;
char * p ;
if ( ! page )
return bytes - n ;
chunk = min_t ( size_t , n , PAGE_SIZE - off ) ;
p = kmap_local_page ( page ) ;
2021-05-01 01:39:25 +03:00
memset ( p + off , 0 , chunk ) ;
kunmap_local ( p ) ;
2022-06-14 20:53:53 +03:00
}
2016-09-22 23:33:12 +03:00
return bytes ;
}
2014-08-01 17:27:22 +04:00
size_t iov_iter_zero ( size_t bytes , struct iov_iter * i )
{
2018-10-22 15:07:28 +03:00
if ( unlikely ( iov_iter_is_pipe ( i ) ) )
2016-09-22 23:33:12 +03:00
return pipe_zero ( bytes , i ) ;
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , count ,
clear_user ( base , len ) ,
memset ( base , 0 , len )
2014-11-27 22:18:54 +03:00
)
return bytes ;
2014-08-01 17:27:22 +04:00
}
EXPORT_SYMBOL ( iov_iter_zero ) ;
2021-04-30 17:26:41 +03:00
size_t copy_page_from_iter_atomic ( struct page * page , unsigned offset , size_t bytes ,
struct iov_iter * i )
2014-04-05 07:12:29 +04:00
{
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
char * kaddr = kmap_atomic ( page ) , * p = kaddr + offset ;
2022-07-29 20:01:57 +03:00
if ( ! page_copy_sane ( page , offset , bytes ) ) {
2017-06-30 04:52:57 +03:00
kunmap_atomic ( kaddr ) ;
return 0 ;
}
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( ! i - > data_source ) ) {
2016-09-22 23:33:12 +03:00
kunmap_atomic ( kaddr ) ;
return 0 ;
}
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off ,
copyin ( p + off , base , len ) ,
memcpy ( p + off , base , len )
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
)
kunmap_atomic ( kaddr ) ;
return bytes ;
2014-04-05 07:12:29 +04:00
}
2021-04-30 17:26:41 +03:00
EXPORT_SYMBOL ( copy_page_from_iter_atomic ) ;
2014-04-05 07:12:29 +04:00
2016-09-22 23:33:12 +03:00
static void pipe_advance ( struct iov_iter * i , size_t size )
{
struct pipe_inode_info * pipe = i - > pipe ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
int off = i - > last_offset ;
2019-11-15 16:30:32 +03:00
2022-06-15 23:03:25 +03:00
if ( ! off & & ! size ) {
pipe_discard_from ( pipe , i - > start_head ) ; // discard everything
return ;
}
i - > count - = size ;
while ( 1 ) {
struct pipe_buffer * buf = pipe_buf ( pipe , i - > head ) ;
2016-09-22 23:33:12 +03:00
if ( off ) /* make it relative to the beginning of buffer */
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
size + = abs ( off ) - buf - > offset ;
2022-06-15 23:03:25 +03:00
if ( size < = buf - > len ) {
buf - > len = size ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset = last_offset ( buf ) ;
2022-06-15 23:03:25 +03:00
break ;
2016-09-22 23:33:12 +03:00
}
2022-06-15 23:03:25 +03:00
size - = buf - > len ;
i - > head + + ;
off = 0 ;
2016-09-22 23:33:12 +03:00
}
2022-06-15 23:03:25 +03:00
pipe_discard_from ( pipe , i - > head + 1 ) ; // discard everything past this one
2016-09-22 23:33:12 +03:00
}
2021-01-09 19:03:01 +03:00
static void iov_iter_bvec_advance ( struct iov_iter * i , size_t size )
{
2022-06-07 06:44:33 +03:00
const struct bio_vec * bvec , * end ;
2021-01-09 19:03:01 +03:00
2022-06-07 06:44:33 +03:00
if ( ! i - > count )
return ;
i - > count - = size ;
size + = i - > iov_offset ;
2021-01-09 19:03:01 +03:00
2022-06-07 06:44:33 +03:00
for ( bvec = i - > bvec , end = bvec + i - > nr_segs ; bvec < end ; bvec + + ) {
if ( likely ( size < bvec - > bv_len ) )
break ;
size - = bvec - > bv_len ;
}
i - > iov_offset = size ;
i - > nr_segs - = bvec - i - > bvec ;
i - > bvec = bvec ;
2021-01-09 19:03:01 +03:00
}
2021-04-23 19:58:53 +03:00
static void iov_iter_iovec_advance ( struct iov_iter * i , size_t size )
{
const struct iovec * iov , * end ;
if ( ! i - > count )
return ;
i - > count - = size ;
size + = i - > iov_offset ; // from beginning of current segment
for ( iov = i - > iov , end = iov + i - > nr_segs ; iov < end ; iov + + ) {
if ( likely ( size < iov - > iov_len ) )
break ;
size - = iov - > iov_len ;
}
i - > iov_offset = size ;
i - > nr_segs - = iov - i - > iov ;
i - > iov = iov ;
}
2014-04-05 07:12:29 +04:00
void iov_iter_advance ( struct iov_iter * i , size_t size )
{
2021-04-24 05:24:08 +03:00
if ( unlikely ( i - > count < size ) )
size = i - > count ;
2022-05-22 21:59:25 +03:00
if ( likely ( iter_is_ubuf ( i ) ) | | unlikely ( iov_iter_is_xarray ( i ) ) ) {
i - > iov_offset + = size ;
i - > count - = size ;
} else if ( likely ( iter_is_iovec ( i ) | | iov_iter_is_kvec ( i ) ) ) {
2021-04-23 19:58:53 +03:00
/* iovec and kvec have identical layouts */
iov_iter_iovec_advance ( i , size ) ;
} else if ( iov_iter_is_bvec ( i ) ) {
iov_iter_bvec_advance ( i , size ) ;
} else if ( iov_iter_is_pipe ( i ) ) {
2016-09-22 23:33:12 +03:00
pipe_advance ( i , size ) ;
2021-04-23 19:58:53 +03:00
} else if ( iov_iter_is_discard ( i ) ) {
i - > count - = size ;
2021-01-09 19:03:01 +03:00
}
2014-04-05 07:12:29 +04:00
}
EXPORT_SYMBOL ( iov_iter_advance ) ;
2017-02-18 02:42:24 +03:00
void iov_iter_revert ( struct iov_iter * i , size_t unroll )
{
if ( ! unroll )
return ;
2017-05-08 20:54:47 +03:00
if ( WARN_ON ( unroll > MAX_RW_COUNT ) )
return ;
2017-02-18 02:42:24 +03:00
i - > count + = unroll ;
2018-10-22 15:07:28 +03:00
if ( unlikely ( iov_iter_is_pipe ( i ) ) ) {
2017-02-18 02:42:24 +03:00
struct pipe_inode_info * pipe = i - > pipe ;
2022-06-13 00:54:35 +03:00
unsigned int head = pipe - > head ;
while ( head > i - > start_head ) {
struct pipe_buffer * b = pipe_buf ( pipe , - - head ) ;
if ( unroll < b - > len ) {
b - > len - = unroll ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset = last_offset ( b ) ;
2022-06-13 00:54:35 +03:00
i - > head = head ;
return ;
2017-02-18 02:42:24 +03:00
}
2022-06-13 00:54:35 +03:00
unroll - = b - > len ;
pipe_buf_release ( pipe , b ) ;
pipe - > head - - ;
2017-02-18 02:42:24 +03:00
}
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
i - > last_offset = 0 ;
2022-06-13 00:54:35 +03:00
i - > head = head ;
2017-02-18 02:42:24 +03:00
return ;
}
2018-10-20 02:57:56 +03:00
if ( unlikely ( iov_iter_is_discard ( i ) ) )
return ;
2017-02-18 02:42:24 +03:00
if ( unroll < = i - > iov_offset ) {
i - > iov_offset - = unroll ;
return ;
}
unroll - = i - > iov_offset ;
2022-05-22 21:59:25 +03:00
if ( iov_iter_is_xarray ( i ) | | iter_is_ubuf ( i ) ) {
2020-02-10 13:00:21 +03:00
BUG ( ) ; /* We should never go beyond the start of the specified
* range since we might then be straying into pages that
* aren ' t pinned .
*/
} else if ( iov_iter_is_bvec ( i ) ) {
2017-02-18 02:42:24 +03:00
const struct bio_vec * bvec = i - > bvec ;
while ( 1 ) {
size_t n = ( - - bvec ) - > bv_len ;
i - > nr_segs + + ;
if ( unroll < = n ) {
i - > bvec = bvec ;
i - > iov_offset = n - unroll ;
return ;
}
unroll - = n ;
}
} else { /* same logics for iovec and kvec */
const struct iovec * iov = i - > iov ;
while ( 1 ) {
size_t n = ( - - iov ) - > iov_len ;
i - > nr_segs + + ;
if ( unroll < = n ) {
i - > iov = iov ;
i - > iov_offset = n - unroll ;
return ;
}
unroll - = n ;
}
}
}
EXPORT_SYMBOL ( iov_iter_revert ) ;
2014-04-05 07:12:29 +04:00
/*
* Return the count of just the current iov_iter segment .
*/
size_t iov_iter_single_seg_count ( const struct iov_iter * i )
{
2021-06-03 00:25:59 +03:00
if ( i - > nr_segs > 1 ) {
if ( likely ( iter_is_iovec ( i ) | | iov_iter_is_kvec ( i ) ) )
return min ( i - > count , i - > iov - > iov_len - i - > iov_offset ) ;
if ( iov_iter_is_bvec ( i ) )
return min ( i - > count , i - > bvec - > bv_len - i - > iov_offset ) ;
}
return i - > count ;
2014-04-05 07:12:29 +04:00
}
EXPORT_SYMBOL ( iov_iter_single_seg_count ) ;
2018-10-20 02:57:56 +03:00
void iov_iter_kvec ( struct iov_iter * i , unsigned int direction ,
2015-01-23 09:08:07 +03:00
const struct kvec * kvec , unsigned long nr_segs ,
2014-11-24 22:46:11 +03:00
size_t count )
{
2018-10-20 02:57:56 +03:00
WARN_ON ( direction & ~ ( READ | WRITE ) ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_KVEC ,
. data_source = direction ,
. kvec = kvec ,
. nr_segs = nr_segs ,
. iov_offset = 0 ,
. count = count
} ;
2014-11-24 22:46:11 +03:00
}
EXPORT_SYMBOL ( iov_iter_kvec ) ;
2018-10-20 02:57:56 +03:00
void iov_iter_bvec ( struct iov_iter * i , unsigned int direction ,
2015-01-23 09:08:07 +03:00
const struct bio_vec * bvec , unsigned long nr_segs ,
size_t count )
{
2018-10-20 02:57:56 +03:00
WARN_ON ( direction & ~ ( READ | WRITE ) ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_BVEC ,
. data_source = direction ,
. bvec = bvec ,
. nr_segs = nr_segs ,
. iov_offset = 0 ,
. count = count
} ;
2015-01-23 09:08:07 +03:00
}
EXPORT_SYMBOL ( iov_iter_bvec ) ;
2018-10-20 02:57:56 +03:00
void iov_iter_pipe ( struct iov_iter * i , unsigned int direction ,
2016-09-22 23:33:12 +03:00
struct pipe_inode_info * pipe ,
size_t count )
{
2018-10-20 02:57:56 +03:00
BUG_ON ( direction ! = READ ) ;
2019-11-15 16:30:32 +03:00
WARN_ON ( pipe_full ( pipe - > head , pipe - > tail , pipe - > ring_size ) ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_PIPE ,
. data_source = false ,
. pipe = pipe ,
. head = pipe - > head ,
. start_head = pipe - > head ,
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
. last_offset = 0 ,
2021-04-22 21:50:39 +03:00
. count = count
} ;
2016-09-22 23:33:12 +03:00
}
EXPORT_SYMBOL ( iov_iter_pipe ) ;
2020-02-10 13:00:21 +03:00
/**
* iov_iter_xarray - Initialise an I / O iterator to use the pages in an xarray
* @ i : The iterator to initialise .
* @ direction : The direction of the transfer .
* @ xarray : The xarray to access .
* @ start : The start file position .
* @ count : The size of the I / O buffer in bytes .
*
* Set up an I / O iterator to either draw data out of the pages attached to an
* inode or to inject data into those pages . The pages * must * be prevented
* from evaporation , either by taking a ref on them or locking them by the
* caller .
*/
void iov_iter_xarray ( struct iov_iter * i , unsigned int direction ,
struct xarray * xarray , loff_t start , size_t count )
{
BUG_ON ( direction & ~ 1 ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_XARRAY ,
. data_source = direction ,
. xarray = xarray ,
. xarray_start = start ,
. count = count ,
. iov_offset = 0
} ;
2020-02-10 13:00:21 +03:00
}
EXPORT_SYMBOL ( iov_iter_xarray ) ;
2018-10-20 02:57:56 +03:00
/**
* iov_iter_discard - Initialise an I / O iterator that discards data
* @ i : The iterator to initialise .
* @ direction : The direction of the transfer .
* @ count : The size of the I / O buffer in bytes .
*
* Set up an I / O iterator that just discards everything that ' s written to it .
* It ' s only available as a READ iterator .
*/
void iov_iter_discard ( struct iov_iter * i , unsigned int direction , size_t count )
{
BUG_ON ( direction ! = READ ) ;
2021-04-22 21:50:39 +03:00
* i = ( struct iov_iter ) {
. iter_type = ITER_DISCARD ,
. data_source = false ,
. count = count ,
. iov_offset = 0
} ;
2018-10-20 02:57:56 +03:00
}
EXPORT_SYMBOL ( iov_iter_discard ) ;
2022-06-10 22:58:27 +03:00
static bool iov_iter_aligned_iovec ( const struct iov_iter * i , unsigned addr_mask ,
unsigned len_mask )
{
size_t size = i - > count ;
size_t skip = i - > iov_offset ;
unsigned k ;
for ( k = 0 ; k < i - > nr_segs ; k + + , skip = 0 ) {
size_t len = i - > iov [ k ] . iov_len - skip ;
if ( len > size )
len = size ;
if ( len & len_mask )
return false ;
if ( ( unsigned long ) ( i - > iov [ k ] . iov_base + skip ) & addr_mask )
return false ;
size - = len ;
if ( ! size )
break ;
}
return true ;
}
static bool iov_iter_aligned_bvec ( const struct iov_iter * i , unsigned addr_mask ,
unsigned len_mask )
{
size_t size = i - > count ;
unsigned skip = i - > iov_offset ;
unsigned k ;
for ( k = 0 ; k < i - > nr_segs ; k + + , skip = 0 ) {
size_t len = i - > bvec [ k ] . bv_len - skip ;
if ( len > size )
len = size ;
if ( len & len_mask )
return false ;
if ( ( unsigned long ) ( i - > bvec [ k ] . bv_offset + skip ) & addr_mask )
return false ;
size - = len ;
if ( ! size )
break ;
}
return true ;
}
/**
* iov_iter_is_aligned ( ) - Check if the addresses and lengths of each segments
* are aligned to the parameters .
*
* @ i : & struct iov_iter to restore
* @ addr_mask : bit mask to check against the iov element ' s addresses
* @ len_mask : bit mask to check against the iov element ' s lengths
*
* Return : false if any addresses or lengths intersect with the provided masks
*/
bool iov_iter_is_aligned ( const struct iov_iter * i , unsigned addr_mask ,
unsigned len_mask )
{
2022-05-22 21:59:25 +03:00
if ( likely ( iter_is_ubuf ( i ) ) ) {
if ( i - > count & len_mask )
return false ;
if ( ( unsigned long ) ( i - > ubuf + i - > iov_offset ) & addr_mask )
return false ;
return true ;
}
2022-06-10 22:58:27 +03:00
if ( likely ( iter_is_iovec ( i ) | | iov_iter_is_kvec ( i ) ) )
return iov_iter_aligned_iovec ( i , addr_mask , len_mask ) ;
if ( iov_iter_is_bvec ( i ) )
return iov_iter_aligned_bvec ( i , addr_mask , len_mask ) ;
if ( iov_iter_is_pipe ( i ) ) {
size_t size = i - > count ;
if ( size & len_mask )
return false ;
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( size & & i - > last_offset > 0 ) {
if ( i - > last_offset & addr_mask )
2022-06-10 22:58:27 +03:00
return false ;
}
return true ;
}
if ( iov_iter_is_xarray ( i ) ) {
if ( i - > count & len_mask )
return false ;
if ( ( i - > xarray_start + i - > iov_offset ) & addr_mask )
return false ;
}
return true ;
}
EXPORT_SYMBOL_GPL ( iov_iter_is_aligned ) ;
2021-04-25 07:44:35 +03:00
static unsigned long iov_iter_alignment_iovec ( const struct iov_iter * i )
2014-04-05 07:12:29 +04:00
{
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
unsigned long res = 0 ;
size_t size = i - > count ;
2021-04-25 07:44:35 +03:00
size_t skip = i - > iov_offset ;
unsigned k ;
for ( k = 0 ; k < i - > nr_segs ; k + + , skip = 0 ) {
size_t len = i - > iov [ k ] . iov_len - skip ;
if ( len ) {
res | = ( unsigned long ) i - > iov [ k ] . iov_base + skip ;
if ( len > size )
len = size ;
res | = len ;
size - = len ;
if ( ! size )
break ;
}
}
return res ;
}
iov_iter.c: macros for iterating over iov_iter
iterate_all_kinds(iter, size, ident, step_iovec, step_bvec)
iterates through the ranges covered by iter (up to size bytes total),
repeating step_iovec or step_bvec for each of those. ident is
declared in expansion of that thing, either as struct iovec or
struct bvec, and it contains the range we are currently looking
at. step_bvec should be a void expression, step_iovec - a size_t
one, with non-zero meaning "stop here, that many bytes from this
range left". In the end, the amount actually handled is stored
in size.
iov_iter_copy_from_user_atomic() and iov_iter_alignment() converted
to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-27 21:51:41 +03:00
2021-04-25 07:44:35 +03:00
static unsigned long iov_iter_alignment_bvec ( const struct iov_iter * i )
{
unsigned res = 0 ;
size_t size = i - > count ;
unsigned skip = i - > iov_offset ;
unsigned k ;
for ( k = 0 ; k < i - > nr_segs ; k + + , skip = 0 ) {
size_t len = i - > bvec [ k ] . bv_len - skip ;
res | = ( unsigned long ) i - > bvec [ k ] . bv_offset + skip ;
if ( len > size )
len = size ;
res | = len ;
size - = len ;
if ( ! size )
break ;
}
return res ;
}
unsigned long iov_iter_alignment ( const struct iov_iter * i )
{
2022-05-22 21:59:25 +03:00
if ( likely ( iter_is_ubuf ( i ) ) ) {
size_t size = i - > count ;
if ( size )
return ( ( unsigned long ) i - > ubuf + i - > iov_offset ) | size ;
return 0 ;
}
2021-04-25 07:44:35 +03:00
/* iovec and kvec have identical layouts */
if ( likely ( iter_is_iovec ( i ) | | iov_iter_is_kvec ( i ) ) )
return iov_iter_alignment_iovec ( i ) ;
if ( iov_iter_is_bvec ( i ) )
return iov_iter_alignment_bvec ( i ) ;
if ( iov_iter_is_pipe ( i ) ) {
size_t size = i - > count ;
2019-12-16 13:54:32 +03:00
ITER_PIPE: cache the type of last buffer
We often need to find whether the last buffer is anon or not, and
currently it's rather clumsy:
check if ->iov_offset is non-zero (i.e. that pipe is not empty)
if so, get the corresponding pipe_buffer and check its ->ops
if it's &default_pipe_buf_ops, we have an anon buffer.
Let's replace the use of ->iov_offset (which is nowhere near similar to
its role for other flavours) with signed field (->last_offset), with
the following rules:
empty, no buffers occupied: 0
anon, with bytes up to N-1 filled: N
zero-copy, with bytes up to N-1 filled: -N
That way abs(i->last_offset) is equal to what used to be in i->iov_offset
and empty vs. anon vs. zero-copy can be distinguished by the sign of
i->last_offset.
Checks for "should we extend the last buffer or should we start
a new one?" become easier to follow that way.
Note that most of the operations can only be done in a sane
state - i.e. when the pipe has nothing past the current position of
iterator. About the only thing that could be done outside of that
state is iov_iter_advance(), which transitions to the sane state by
truncating the pipe. There are only two cases where we leave the
sane state:
1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be
dealt with later, when we make get_pages advancing - the callers are
actually happier that way.
2) iov_iter copied, then something is put into the copy. Since
they share the underlying pipe, the original gets behind. When we
decide that we are done with the copy (original is not usable until then)
we advance the original. direct_io used to be done that way; nowadays
it operates on the original and we do iov_iter_revert() to discard
the excessive data. At the moment there's nothing in the kernel that
could do that to ITER_PIPE iterators, so this reason for insane state
is theoretical right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-06-15 09:02:51 +03:00
if ( size & & i - > last_offset > 0 )
return size | i - > last_offset ;
2016-09-22 23:33:12 +03:00
return size ;
}
2021-04-25 07:44:35 +03:00
if ( iov_iter_is_xarray ( i ) )
2021-04-26 00:02:38 +03:00
return ( i - > xarray_start + i - > iov_offset ) | i - > count ;
2021-04-25 07:44:35 +03:00
return 0 ;
2014-04-05 07:12:29 +04:00
}
EXPORT_SYMBOL ( iov_iter_alignment ) ;
2016-04-09 02:05:19 +03:00
unsigned long iov_iter_gap_alignment ( const struct iov_iter * i )
{
2016-12-22 05:55:02 +03:00
unsigned long res = 0 ;
2021-04-25 08:03:16 +03:00
unsigned long v = 0 ;
2016-04-09 02:05:19 +03:00
size_t size = i - > count ;
2021-04-25 08:03:16 +03:00
unsigned k ;
2016-04-09 02:05:19 +03:00
2022-05-22 21:59:25 +03:00
if ( iter_is_ubuf ( i ) )
return 0 ;
2021-04-25 08:03:16 +03:00
if ( WARN_ON ( ! iter_is_iovec ( i ) ) )
2016-09-22 23:33:12 +03:00
return ~ 0U ;
2021-04-25 08:03:16 +03:00
for ( k = 0 ; k < i - > nr_segs ; k + + ) {
if ( i - > iov [ k ] . iov_len ) {
unsigned long base = ( unsigned long ) i - > iov [ k ] . iov_base ;
if ( v ) // if not the first one
res | = base | v ; // this start | previous end
v = base + i - > iov [ k ] . iov_len ;
if ( size < = i - > iov [ k ] . iov_len )
break ;
size - = i - > iov [ k ] . iov_len ;
}
}
2016-12-22 05:55:02 +03:00
return res ;
2016-04-09 02:05:19 +03:00
}
EXPORT_SYMBOL ( iov_iter_gap_alignment ) ;
2022-06-17 21:45:41 +03:00
static int want_pages_array ( struct page * * * res , size_t size ,
size_t start , unsigned int maxpages )
2022-06-17 20:35:35 +03:00
{
2022-06-17 21:45:41 +03:00
unsigned int count = DIV_ROUND_UP ( size + start , PAGE_SIZE ) ;
if ( count > maxpages )
count = maxpages ;
WARN_ON ( ! count ) ; // caller should've prevented that
if ( ! * res ) {
* res = kvmalloc_array ( count , sizeof ( struct page * ) , GFP_KERNEL ) ;
if ( ! * res )
return 0 ;
}
return count ;
2022-06-17 20:35:35 +03:00
}
2016-09-22 23:33:12 +03:00
static ssize_t pipe_get_pages ( struct iov_iter * i ,
2022-06-17 20:35:35 +03:00
struct page * * * pages , size_t maxsize , unsigned maxpages ,
2016-09-22 23:33:12 +03:00
size_t * start )
{
2022-06-14 23:38:53 +03:00
unsigned int npages , count , off , chunk ;
2022-06-17 20:35:35 +03:00
struct page * * p ;
2022-06-14 23:38:53 +03:00
size_t left ;
2016-09-22 23:33:12 +03:00
if ( ! sanity ( i ) )
return - EFAULT ;
2022-06-15 16:44:38 +03:00
* start = off = pipe_npages ( i , & npages ) ;
2022-06-17 21:45:41 +03:00
if ( ! npages )
return - EFAULT ;
count = want_pages_array ( pages , maxsize , off , min ( npages , maxpages ) ) ;
if ( ! count )
return - ENOMEM ;
2022-06-17 20:35:35 +03:00
p = * pages ;
2022-06-14 23:38:53 +03:00
for ( npages = 0 , left = maxsize ; npages < count ; npages + + , left - = chunk ) {
struct page * page = append_pipe ( i , left , & off ) ;
2022-06-17 21:30:39 +03:00
if ( ! page )
break ;
2022-06-14 23:38:53 +03:00
chunk = min_t ( size_t , left , PAGE_SIZE - off ) ;
2022-06-17 21:30:39 +03:00
get_page ( * p + + = page ) ;
}
if ( ! npages )
return - EFAULT ;
2022-06-14 23:38:53 +03:00
return maxsize - left ;
2016-09-22 23:33:12 +03:00
}
2020-02-10 13:00:21 +03:00
static ssize_t iter_xarray_populate_pages ( struct page * * pages , struct xarray * xa ,
pgoff_t index , unsigned int nr_pages )
{
XA_STATE ( xas , xa , index ) ;
struct page * page ;
unsigned int ret = 0 ;
rcu_read_lock ( ) ;
for ( page = xas_load ( & xas ) ; page ; page = xas_next ( & xas ) ) {
if ( xas_retry ( & xas , page ) )
continue ;
/* Has the page moved or been split? */
if ( unlikely ( page ! = xas_reload ( & xas ) ) ) {
xas_reset ( & xas ) ;
continue ;
}
pages [ ret ] = find_subpage ( page , xas . xa_index ) ;
get_page ( pages [ ret ] ) ;
if ( + + ret = = nr_pages )
break ;
}
rcu_read_unlock ( ) ;
return ret ;
}
static ssize_t iter_xarray_get_pages ( struct iov_iter * i ,
2022-06-17 20:48:03 +03:00
struct page * * * pages , size_t maxsize ,
2020-02-10 13:00:21 +03:00
unsigned maxpages , size_t * _start_offset )
{
2022-06-17 21:45:41 +03:00
unsigned nr , offset , count ;
pgoff_t index ;
2020-02-10 13:00:21 +03:00
loff_t pos ;
pos = i - > xarray_start + i - > iov_offset ;
index = pos > > PAGE_SHIFT ;
offset = pos & ~ PAGE_MASK ;
* _start_offset = offset ;
2022-06-17 21:45:41 +03:00
count = want_pages_array ( pages , maxsize , offset , maxpages ) ;
if ( ! count )
return - ENOMEM ;
2022-06-17 20:48:03 +03:00
nr = iter_xarray_populate_pages ( * pages , i - > xarray , index , count ) ;
2020-02-10 13:00:21 +03:00
if ( nr = = 0 )
return 0 ;
2022-06-10 20:05:12 +03:00
maxsize = min_t ( size_t , nr * PAGE_SIZE - offset , maxsize ) ;
2022-06-11 11:04:33 +03:00
i - > iov_offset + = maxsize ;
i - > count - = maxsize ;
2022-06-10 20:05:12 +03:00
return maxsize ;
2020-02-10 13:00:21 +03:00
}
2022-05-22 21:59:25 +03:00
/* must be done on non-empty ITER_UBUF or ITER_IOVEC one */
2022-06-17 23:07:49 +03:00
static unsigned long first_iovec_segment ( const struct iov_iter * i , size_t * size )
2021-04-25 16:14:44 +03:00
{
size_t skip ;
long k ;
2022-05-22 21:59:25 +03:00
if ( iter_is_ubuf ( i ) )
return ( unsigned long ) i - > ubuf + i - > iov_offset ;
2021-04-25 16:14:44 +03:00
for ( k = 0 , skip = i - > iov_offset ; k < i - > nr_segs ; k + + , skip = 0 ) {
size_t len = i - > iov [ k ] . iov_len - skip ;
if ( unlikely ( ! len ) )
continue ;
2022-06-21 23:10:37 +03:00
if ( * size > len )
* size = len ;
2022-06-17 23:07:49 +03:00
return ( unsigned long ) i - > iov [ k ] . iov_base + skip ;
2021-04-25 16:14:44 +03:00
}
BUG ( ) ; // if it had been empty, we wouldn't get called
}
/* must be done on non-empty ITER_BVEC one */
static struct page * first_bvec_segment ( const struct iov_iter * i ,
2022-06-21 23:10:37 +03:00
size_t * size , size_t * start )
2021-04-25 16:14:44 +03:00
{
struct page * page ;
size_t skip = i - > iov_offset , len ;
len = i - > bvec - > bv_len - skip ;
2022-06-21 23:10:37 +03:00
if ( * size > len )
* size = len ;
2021-04-25 16:14:44 +03:00
skip + = i - > bvec - > bv_offset ;
page = i - > bvec - > bv_page + skip / PAGE_SIZE ;
2022-06-21 22:55:19 +03:00
* start = skip % PAGE_SIZE ;
2021-04-25 16:14:44 +03:00
return page ;
}
2022-06-17 20:54:15 +03:00
static ssize_t __iov_iter_get_pages_alloc ( struct iov_iter * i ,
struct page * * * pages , size_t maxsize ,
2022-10-21 20:41:10 +03:00
unsigned int maxpages , size_t * start ,
unsigned int gup_flags )
2014-04-05 07:12:29 +04:00
{
2022-06-17 21:45:41 +03:00
unsigned int n ;
2021-04-25 16:14:44 +03:00
2014-11-27 22:12:09 +03:00
if ( maxsize > i - > count )
maxsize = i - > count ;
2022-06-17 20:54:15 +03:00
if ( ! maxsize )
2021-04-25 16:14:44 +03:00
return 0 ;
2022-06-11 23:44:21 +03:00
if ( maxsize > MAX_RW_COUNT )
maxsize = MAX_RW_COUNT ;
2014-11-27 22:12:09 +03:00
2022-05-22 21:59:25 +03:00
if ( likely ( user_backed_iter ( i ) ) ) {
2021-04-25 16:14:44 +03:00
unsigned long addr ;
2022-06-17 21:45:41 +03:00
int res ;
2014-11-27 22:12:09 +03:00
2021-07-12 13:06:14 +03:00
if ( iov_iter_rw ( i ) ! = WRITE )
gup_flags | = FOLL_WRITE ;
if ( i - > nofault )
gup_flags | = FOLL_NOFAULT ;
2022-06-17 23:07:49 +03:00
addr = first_iovec_segment ( i , & maxsize ) ;
* start = addr % PAGE_SIZE ;
addr & = PAGE_MASK ;
2022-06-17 21:45:41 +03:00
n = want_pages_array ( pages , maxsize , * start , maxpages ) ;
if ( ! n )
return - ENOMEM ;
2022-06-17 20:54:15 +03:00
res = get_user_pages_fast ( addr , n , gup_flags , * pages ) ;
2021-07-21 20:03:47 +03:00
if ( unlikely ( res < = 0 ) )
2014-11-27 22:12:09 +03:00
return res ;
2022-06-10 20:05:12 +03:00
maxsize = min_t ( size_t , maxsize , res * PAGE_SIZE - * start ) ;
iov_iter_advance ( i , maxsize ) ;
return maxsize ;
2021-04-25 16:14:44 +03:00
}
if ( iov_iter_is_bvec ( i ) ) {
2022-06-17 20:54:15 +03:00
struct page * * p ;
2021-04-25 16:14:44 +03:00
struct page * page ;
2022-06-21 23:10:37 +03:00
page = first_bvec_segment ( i , & maxsize , start ) ;
2022-06-17 21:45:41 +03:00
n = want_pages_array ( pages , maxsize , * start , maxpages ) ;
if ( ! n )
return - ENOMEM ;
2022-06-17 20:54:15 +03:00
p = * pages ;
2022-06-21 22:55:19 +03:00
for ( int k = 0 ; k < n ; k + + )
2022-06-10 20:05:12 +03:00
get_page ( p [ k ] = page + k ) ;
maxsize = min_t ( size_t , maxsize , n * PAGE_SIZE - * start ) ;
2022-06-11 11:04:33 +03:00
i - > count - = maxsize ;
i - > iov_offset + = maxsize ;
if ( i - > iov_offset = = i - > bvec - > bv_len ) {
i - > iov_offset = 0 ;
i - > bvec + + ;
i - > nr_segs - - ;
}
2022-06-10 20:05:12 +03:00
return maxsize ;
2021-04-25 16:14:44 +03:00
}
if ( iov_iter_is_pipe ( i ) )
2022-06-17 20:54:15 +03:00
return pipe_get_pages ( i , pages , maxsize , maxpages , start ) ;
2021-04-25 16:14:44 +03:00
if ( iov_iter_is_xarray ( i ) )
2022-06-17 20:54:15 +03:00
return iter_xarray_get_pages ( i , pages , maxsize , maxpages , start ) ;
2021-04-25 16:14:44 +03:00
return - EFAULT ;
2014-04-05 07:12:29 +04:00
}
2022-10-21 20:41:10 +03:00
ssize_t iov_iter_get_pages ( struct iov_iter * i ,
2022-06-17 20:54:15 +03:00
struct page * * pages , size_t maxsize , unsigned maxpages ,
2022-10-21 20:41:10 +03:00
size_t * start , unsigned gup_flags )
2014-04-05 07:12:29 +04:00
{
2022-06-17 20:54:15 +03:00
if ( ! maxpages )
2021-04-25 16:14:44 +03:00
return 0 ;
2022-06-17 20:54:15 +03:00
BUG_ON ( ! pages ) ;
2021-04-25 16:14:44 +03:00
2022-10-21 20:41:10 +03:00
return __iov_iter_get_pages_alloc ( i , & pages , maxsize , maxpages ,
start , gup_flags ) ;
}
EXPORT_SYMBOL_GPL ( iov_iter_get_pages ) ;
ssize_t iov_iter_get_pages2 ( struct iov_iter * i , struct page * * pages ,
size_t maxsize , unsigned maxpages , size_t * start )
{
return iov_iter_get_pages ( i , pages , maxsize , maxpages , start , 0 ) ;
2014-04-05 07:12:29 +04:00
}
2022-06-10 20:05:12 +03:00
EXPORT_SYMBOL ( iov_iter_get_pages2 ) ;
2022-06-11 03:38:20 +03:00
2022-10-21 20:41:10 +03:00
ssize_t iov_iter_get_pages_alloc ( struct iov_iter * i ,
2022-06-11 03:38:20 +03:00
struct page * * * pages , size_t maxsize ,
2022-10-21 20:41:10 +03:00
size_t * start , unsigned gup_flags )
2022-06-11 03:38:20 +03:00
{
ssize_t len ;
* pages = NULL ;
2022-10-21 20:41:10 +03:00
len = __iov_iter_get_pages_alloc ( i , pages , maxsize , ~ 0U , start ,
gup_flags ) ;
2022-06-11 03:38:20 +03:00
if ( len < = 0 ) {
kvfree ( * pages ) ;
* pages = NULL ;
}
return len ;
}
2022-10-21 20:41:10 +03:00
EXPORT_SYMBOL_GPL ( iov_iter_get_pages_alloc ) ;
ssize_t iov_iter_get_pages_alloc2 ( struct iov_iter * i ,
struct page * * * pages , size_t maxsize , size_t * start )
{
return iov_iter_get_pages_alloc ( i , pages , maxsize , start , 0 ) ;
2022-06-11 03:38:20 +03:00
}
2022-06-10 20:05:12 +03:00
EXPORT_SYMBOL ( iov_iter_get_pages_alloc2 ) ;
2014-04-05 07:12:29 +04:00
2014-11-24 09:08:00 +03:00
size_t csum_and_copy_from_iter ( void * addr , size_t bytes , __wsum * csum ,
struct iov_iter * i )
{
__wsum sum , next ;
sum = * csum ;
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( ! i - > data_source ) )
2016-09-22 23:33:12 +03:00
return 0 ;
2022-09-16 03:11:15 +03:00
2021-05-02 18:35:03 +03:00
iterate_and_advance ( i , bytes , base , len , off , ( {
next = csum_and_copy_from_user ( base , addr + off , len ) ;
2021-04-30 20:40:48 +03:00
sum = csum_block_add ( sum , next , off ) ;
2021-05-02 18:35:03 +03:00
next ? 0 : len ;
2014-11-24 09:08:00 +03:00
} ) , ( {
2021-05-02 18:35:03 +03:00
sum = csum_and_memcpy ( addr + off , base , len , sum , off ) ;
2014-11-24 09:08:00 +03:00
} )
)
* csum = sum ;
return bytes ;
}
EXPORT_SYMBOL ( csum_and_copy_from_iter ) ;
2021-02-03 22:29:52 +03:00
size_t csum_and_copy_to_iter ( const void * addr , size_t bytes , void * _csstate ,
2014-11-24 09:08:00 +03:00
struct iov_iter * i )
{
2021-02-03 22:29:52 +03:00
struct csum_state * csstate = _csstate ;
2014-11-24 09:08:00 +03:00
__wsum sum , next ;
2018-11-26 00:24:16 +03:00
2022-09-16 03:11:15 +03:00
if ( WARN_ON_ONCE ( i - > data_source ) )
return 0 ;
2018-11-26 00:24:16 +03:00
if ( unlikely ( iov_iter_is_discard ( i ) ) ) {
2022-09-16 03:20:59 +03:00
// can't use csum_memcpy() for that one - data is not copied
csstate - > csum = csum_block_add ( csstate - > csum ,
csum_partial ( addr , bytes , 0 ) ,
csstate - > off ) ;
csstate - > off + = bytes ;
return bytes ;
2016-09-22 23:33:12 +03:00
}
2021-05-03 00:24:40 +03:00
sum = csum_shift ( csstate - > csum , csstate - > off ) ;
if ( unlikely ( iov_iter_is_pipe ( i ) ) )
bytes = csum_and_copy_to_pipe_iter ( addr , bytes , i , & sum ) ;
else iterate_and_advance ( i , bytes , base , len , off , ( {
2021-05-02 18:35:03 +03:00
next = csum_and_copy_to_user ( addr + off , base , len ) ;
2021-04-30 20:40:48 +03:00
sum = csum_block_add ( sum , next , off ) ;
2021-05-02 18:35:03 +03:00
next ? 0 : len ;
2014-11-24 09:08:00 +03:00
} ) , ( {
2021-05-02 18:35:03 +03:00
sum = csum_and_memcpy ( base , addr + off , len , sum , off ) ;
2014-11-24 09:08:00 +03:00
} )
)
2021-06-05 17:19:30 +03:00
csstate - > csum = csum_shift ( sum , csstate - > off ) ;
csstate - > off + = bytes ;
2014-11-24 09:08:00 +03:00
return bytes ;
}
EXPORT_SYMBOL ( csum_and_copy_to_iter ) ;
2018-12-04 04:52:09 +03:00
size_t hash_and_copy_to_iter ( const void * addr , size_t bytes , void * hashp ,
struct iov_iter * i )
{
2020-06-12 09:57:37 +03:00
# ifdef CONFIG_CRYPTO_HASH
2018-12-04 04:52:09 +03:00
struct ahash_request * hash = hashp ;
struct scatterlist sg ;
size_t copied ;
copied = copy_to_iter ( addr , bytes , i ) ;
sg_init_one ( & sg , addr , copied ) ;
ahash_request_set_crypt ( hash , & sg , NULL , copied ) ;
crypto_ahash_update ( hash ) ;
return copied ;
2019-04-04 05:31:14 +03:00
# else
return 0 ;
# endif
2018-12-04 04:52:09 +03:00
}
EXPORT_SYMBOL ( hash_and_copy_to_iter ) ;
2021-04-25 23:00:48 +03:00
static int iov_npages ( const struct iov_iter * i , int maxpages )
2014-04-05 07:12:29 +04:00
{
2021-04-25 23:00:48 +03:00
size_t skip = i - > iov_offset , size = i - > count ;
const struct iovec * p ;
2014-11-27 22:09:46 +03:00
int npages = 0 ;
2021-04-25 23:00:48 +03:00
for ( p = i - > iov ; size ; skip = 0 , p + + ) {
unsigned offs = offset_in_page ( p - > iov_base + skip ) ;
size_t len = min ( p - > iov_len - skip , size ) ;
2014-11-27 22:09:46 +03:00
2021-04-25 23:00:48 +03:00
if ( len ) {
size - = len ;
npages + = DIV_ROUND_UP ( offs + len , PAGE_SIZE ) ;
if ( unlikely ( npages > maxpages ) )
return maxpages ;
}
}
return npages ;
}
static int bvec_npages ( const struct iov_iter * i , int maxpages )
{
size_t skip = i - > iov_offset , size = i - > count ;
const struct bio_vec * p ;
int npages = 0 ;
for ( p = i - > bvec ; size ; skip = 0 , p + + ) {
unsigned offs = ( p - > bv_offset + skip ) % PAGE_SIZE ;
size_t len = min ( p - > bv_len - skip , size ) ;
size - = len ;
npages + = DIV_ROUND_UP ( offs + len , PAGE_SIZE ) ;
if ( unlikely ( npages > maxpages ) )
return maxpages ;
}
return npages ;
}
int iov_iter_npages ( const struct iov_iter * i , int maxpages )
{
if ( unlikely ( ! i - > count ) )
return 0 ;
2022-05-22 21:59:25 +03:00
if ( likely ( iter_is_ubuf ( i ) ) ) {
unsigned offs = offset_in_page ( i - > ubuf + i - > iov_offset ) ;
int npages = DIV_ROUND_UP ( offs + i - > count , PAGE_SIZE ) ;
return min ( npages , maxpages ) ;
}
2021-04-25 23:00:48 +03:00
/* iovec and kvec have identical layouts */
if ( likely ( iter_is_iovec ( i ) | | iov_iter_is_kvec ( i ) ) )
return iov_npages ( i , maxpages ) ;
if ( iov_iter_is_bvec ( i ) )
return bvec_npages ( i , maxpages ) ;
if ( iov_iter_is_pipe ( i ) ) {
int npages ;
2016-09-22 23:33:12 +03:00
if ( ! sanity ( i ) )
return 0 ;
2022-06-15 16:44:38 +03:00
pipe_npages ( i , & npages ) ;
2021-04-25 23:00:48 +03:00
return min ( npages , maxpages ) ;
}
if ( iov_iter_is_xarray ( i ) ) {
2021-05-03 18:05:29 +03:00
unsigned offset = ( i - > xarray_start + i - > iov_offset ) % PAGE_SIZE ;
int npages = DIV_ROUND_UP ( offset + i - > count , PAGE_SIZE ) ;
2021-04-25 23:00:48 +03:00
return min ( npages , maxpages ) ;
}
return 0 ;
2014-04-05 07:12:29 +04:00
}
2014-03-19 09:16:16 +04:00
EXPORT_SYMBOL ( iov_iter_npages ) ;
2015-02-01 04:08:47 +03:00
const void * dup_iter ( struct iov_iter * new , struct iov_iter * old , gfp_t flags )
{
* new = * old ;
2018-10-22 15:07:28 +03:00
if ( unlikely ( iov_iter_is_pipe ( new ) ) ) {
2016-09-22 23:33:12 +03:00
WARN_ON ( 1 ) ;
return NULL ;
}
2018-10-22 15:07:28 +03:00
if ( iov_iter_is_bvec ( new ) )
2015-02-01 04:08:47 +03:00
return new - > bvec = kmemdup ( new - > bvec ,
new - > nr_segs * sizeof ( struct bio_vec ) ,
flags ) ;
2022-05-22 21:59:25 +03:00
else if ( iov_iter_is_kvec ( new ) | | iter_is_iovec ( new ) )
2015-02-01 04:08:47 +03:00
/* iovec and kvec have identical layout */
return new - > iov = kmemdup ( new - > iov ,
new - > nr_segs * sizeof ( struct iovec ) ,
flags ) ;
2022-05-22 21:59:25 +03:00
return NULL ;
2015-02-01 04:08:47 +03:00
}
EXPORT_SYMBOL ( dup_iter ) ;
saner iov_iter initialization primitives
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-22 00:45:43 +03:00
2020-09-25 07:51:40 +03:00
static int copy_compat_iovec_from_user ( struct iovec * iov ,
const struct iovec __user * uvec , unsigned long nr_segs )
{
const struct compat_iovec __user * uiov =
( const struct compat_iovec __user * ) uvec ;
int ret = - EFAULT , i ;
2021-01-11 20:19:26 +03:00
if ( ! user_access_begin ( uiov , nr_segs * sizeof ( * uiov ) ) )
2020-09-25 07:51:40 +03:00
return - EFAULT ;
for ( i = 0 ; i < nr_segs ; i + + ) {
compat_uptr_t buf ;
compat_ssize_t len ;
unsafe_get_user ( len , & uiov [ i ] . iov_len , uaccess_end ) ;
unsafe_get_user ( buf , & uiov [ i ] . iov_base , uaccess_end ) ;
/* check for compat_size_t not fitting in compat_ssize_t .. */
if ( len < 0 ) {
ret = - EINVAL ;
goto uaccess_end ;
}
iov [ i ] . iov_base = compat_ptr ( buf ) ;
iov [ i ] . iov_len = len ;
}
ret = 0 ;
uaccess_end :
user_access_end ( ) ;
return ret ;
}
static int copy_iovec_from_user ( struct iovec * iov ,
const struct iovec __user * uvec , unsigned long nr_segs )
2020-09-25 07:51:39 +03:00
{
unsigned long seg ;
2020-09-25 07:51:40 +03:00
if ( copy_from_user ( iov , uvec , nr_segs * sizeof ( * uvec ) ) )
return - EFAULT ;
for ( seg = 0 ; seg < nr_segs ; seg + + ) {
if ( ( ssize_t ) iov [ seg ] . iov_len < 0 )
return - EINVAL ;
2020-09-25 07:51:39 +03:00
}
2020-09-25 07:51:40 +03:00
return 0 ;
}
struct iovec * iovec_from_user ( const struct iovec __user * uvec ,
unsigned long nr_segs , unsigned long fast_segs ,
struct iovec * fast_iov , bool compat )
{
struct iovec * iov = fast_iov ;
int ret ;
2020-09-25 07:51:39 +03:00
/*
2020-09-25 07:51:40 +03:00
* SuS says " The readv() function *may* fail if the iovcnt argument was
* less than or equal to 0 , or greater than { IOV_MAX } . Linux has
* traditionally returned zero for zero segments , so . . .
2020-09-25 07:51:39 +03:00
*/
2020-09-25 07:51:40 +03:00
if ( nr_segs = = 0 )
return iov ;
if ( nr_segs > UIO_MAXIOV )
return ERR_PTR ( - EINVAL ) ;
2020-09-25 07:51:39 +03:00
if ( nr_segs > fast_segs ) {
iov = kmalloc_array ( nr_segs , sizeof ( struct iovec ) , GFP_KERNEL ) ;
2020-09-25 07:51:40 +03:00
if ( ! iov )
return ERR_PTR ( - ENOMEM ) ;
2020-09-25 07:51:39 +03:00
}
2020-09-25 07:51:40 +03:00
if ( compat )
ret = copy_compat_iovec_from_user ( iov , uvec , nr_segs ) ;
else
ret = copy_iovec_from_user ( iov , uvec , nr_segs ) ;
if ( ret ) {
if ( iov ! = fast_iov )
kfree ( iov ) ;
return ERR_PTR ( ret ) ;
}
return iov ;
}
ssize_t __import_iovec ( int type , const struct iovec __user * uvec ,
unsigned nr_segs , unsigned fast_segs , struct iovec * * iovp ,
struct iov_iter * i , bool compat )
{
ssize_t total_len = 0 ;
unsigned long seg ;
struct iovec * iov ;
iov = iovec_from_user ( uvec , nr_segs , fast_segs , * iovp , compat ) ;
if ( IS_ERR ( iov ) ) {
* iovp = NULL ;
return PTR_ERR ( iov ) ;
2020-09-25 07:51:39 +03:00
}
/*
2020-09-25 07:51:40 +03:00
* According to the Single Unix Specification we should return EINVAL if
* an element length is < 0 when cast to ssize_t or if the total length
* would overflow the ssize_t return value of the system call .
2020-09-25 07:51:39 +03:00
*
* Linux caps all read / write calls to MAX_RW_COUNT , and avoids the
* overflow case .
*/
for ( seg = 0 ; seg < nr_segs ; seg + + ) {
ssize_t len = ( ssize_t ) iov [ seg ] . iov_len ;
2020-09-25 07:51:40 +03:00
if ( ! access_ok ( iov [ seg ] . iov_base , len ) ) {
if ( iov ! = * iovp )
kfree ( iov ) ;
* iovp = NULL ;
return - EFAULT ;
2020-09-25 07:51:39 +03:00
}
2020-09-25 07:51:40 +03:00
if ( len > MAX_RW_COUNT - total_len ) {
len = MAX_RW_COUNT - total_len ;
2020-09-25 07:51:39 +03:00
iov [ seg ] . iov_len = len ;
}
2020-09-25 07:51:40 +03:00
total_len + = len ;
2020-09-25 07:51:39 +03:00
}
2020-09-25 07:51:40 +03:00
iov_iter_init ( i , type , iov , nr_segs , total_len ) ;
if ( iov = = * iovp )
* iovp = NULL ;
else
* iovp = iov ;
return total_len ;
2020-09-25 07:51:39 +03:00
}
2016-10-08 12:18:07 +03:00
/**
* import_iovec ( ) - Copy an array of & struct iovec from userspace
* into the kernel , check that it is valid , and initialize a new
* & struct iov_iter iterator to access it .
*
* @ type : One of % READ or % WRITE .
2020-09-25 07:51:40 +03:00
* @ uvec : Pointer to the userspace array .
2016-10-08 12:18:07 +03:00
* @ nr_segs : Number of elements in userspace array .
* @ fast_segs : Number of elements in @ iov .
2020-09-25 07:51:40 +03:00
* @ iovp : ( input and output parameter ) Pointer to pointer to ( usually small
2016-10-08 12:18:07 +03:00
* on - stack ) kernel array .
* @ i : Pointer to iterator that will be initialized on success .
*
* If the array pointed to by * @ iov is large enough to hold all @ nr_segs ,
* then this function places % NULL in * @ iov on return . Otherwise , a new
* array will be allocated and the result placed in * @ iov . This means that
* the caller may call kfree ( ) on * @ iov regardless of whether the small
* on - stack array was used or not ( and regardless of whether this function
* returns an error or not ) .
*
2019-05-15 01:02:22 +03:00
* Return : Negative error code on error , bytes imported on success
2016-10-08 12:18:07 +03:00
*/
2020-09-25 07:51:40 +03:00
ssize_t import_iovec ( int type , const struct iovec __user * uvec ,
saner iov_iter initialization primitives
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-22 00:45:43 +03:00
unsigned nr_segs , unsigned fast_segs ,
2020-09-25 07:51:40 +03:00
struct iovec * * iovp , struct iov_iter * i )
saner iov_iter initialization primitives
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-22 00:45:43 +03:00
{
2020-09-25 07:51:41 +03:00
return __import_iovec ( type , uvec , nr_segs , fast_segs , iovp , i ,
in_compat_syscall ( ) ) ;
saner iov_iter initialization primitives
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-22 00:45:43 +03:00
}
EXPORT_SYMBOL ( import_iovec ) ;
int import_single_range ( int rw , void __user * buf , size_t len ,
struct iovec * iov , struct iov_iter * i )
{
if ( len > MAX_RW_COUNT )
len = MAX_RW_COUNT ;
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if ( unlikely ( ! access_ok ( buf , len ) ) )
saner iov_iter initialization primitives
iovec-backed iov_iter instances are assumed to satisfy several properties:
* no more than UIO_MAXIOV elements in iovec array
* total size of all ranges is no more than MAX_RW_COUNT
* all ranges pass access_ok().
The problem is, invariants of data structures should be established in the
primitives creating those data structures, not in the code using those
primitives. And iov_iter_init() violates that principle. For a while we
managed to get away with that, but once the use of iov_iter started to
spread, it didn't take long for shit to hit the fan - missed check in
sys_sendto() had introduced a roothole.
We _do_ have primitives for importing and validating iovecs (both native and
compat ones) and those primitives are almost always followed by shoving the
resulting iovec into iov_iter. Life would be considerably simpler (and safer)
if we combined those primitives with initializing iov_iter.
That gives us two new primitives - import_iovec() and compat_import_iovec().
Calling conventions:
iovec = iov_array;
err = import_iovec(direction, uvec, nr_segs,
ARRAY_SIZE(iov_array), &iovec,
&iter);
imports user vector into kernel space (into iov_array if it fits, allocated
if it doesn't fit or if iovec was NULL), validates it and sets iter up to
refer to it. On success 0 is returned and allocated kernel copy (or NULL
if the array had fit into caller-supplied one) is returned via iovec.
On failure all allocations are undone and -E... is returned. If the total
size of ranges exceeds MAX_RW_COUNT, the excess is silently truncated.
compat_import_iovec() expects uvec to be a pointer to user array of compat_iovec;
otherwise it's identical to import_iovec().
Finally, import_single_range() sets iov_iter backed by single-element iovec
covering a user-supplied range -
err = import_single_range(direction, address, size, iovec, &iter);
does validation and sets iter up. Again, size in excess of MAX_RW_COUNT gets
silently truncated.
Next commits will be switching the things up to use of those and reducing
the amount of iov_iter_init() instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-22 00:45:43 +03:00
return - EFAULT ;
iov - > iov_base = buf ;
iov - > iov_len = len ;
iov_iter_init ( i , rw , iov , 1 , len ) ;
return 0 ;
}
2015-12-07 04:38:56 +03:00
EXPORT_SYMBOL ( import_single_range ) ;
2021-09-10 20:18:36 +03:00
/**
* iov_iter_restore ( ) - Restore a & struct iov_iter to the same state as when
* iov_iter_save_state ( ) was called .
*
* @ i : & struct iov_iter to restore
* @ state : state to restore from
*
* Used after iov_iter_save_state ( ) to bring restore @ i , if operations may
* have advanced it .
*
* Note : only works on ITER_IOVEC , ITER_BVEC , and ITER_KVEC
*/
void iov_iter_restore ( struct iov_iter * i , struct iov_iter_state * state )
{
if ( WARN_ON_ONCE ( ! iov_iter_is_bvec ( i ) & & ! iter_is_iovec ( i ) ) & &
2022-05-22 21:59:25 +03:00
! iov_iter_is_kvec ( i ) & & ! iter_is_ubuf ( i ) )
2021-09-10 20:18:36 +03:00
return ;
i - > iov_offset = state - > iov_offset ;
i - > count = state - > count ;
2022-05-22 21:59:25 +03:00
if ( iter_is_ubuf ( i ) )
return ;
2021-09-10 20:18:36 +03:00
/*
* For the * vec iters , nr_segs + iov is constant - if we increment
* the vec , then we also decrement the nr_segs count . Hence we don ' t
* need to track both of these , just one is enough and we can deduct
* the other from that . ITER_KVEC and ITER_IOVEC are the same struct
* size , so we can just increment the iov pointer as they are unionzed .
* ITER_BVEC _may_ be the same size on some archs , but on others it is
* not . Be safe and handle it separately .
*/
BUILD_BUG_ON ( sizeof ( struct iovec ) ! = sizeof ( struct kvec ) ) ;
if ( iov_iter_is_bvec ( i ) )
i - > bvec - = state - > nr_segs - i - > nr_segs ;
else
i - > iov - = state - > nr_segs - i - > nr_segs ;
i - > nr_segs = state - > nr_segs ;
}