2019-05-24 13:04:09 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
2009-09-23 03:46:39 +04:00
/*
* GPIO driver for Analog Devices ADP5520 MFD PMICs
*
* Copyright 2009 Analog Devices Inc .
*/
# include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
# include <linux/slab.h>
2009-09-23 03:46:39 +04:00
# include <linux/kernel.h>
# include <linux/init.h>
# include <linux/platform_device.h>
# include <linux/mfd/adp5520.h>
2018-01-14 00:12:07 +03:00
# include <linux/gpio/driver.h>
2009-09-23 03:46:39 +04:00
struct adp5520_gpio {
struct device * master ;
struct gpio_chip gpio_chip ;
unsigned char lut [ ADP5520_MAXGPIOS ] ;
unsigned long output ;
} ;
static int adp5520_gpio_get_value ( struct gpio_chip * chip , unsigned off )
{
struct adp5520_gpio * dev ;
uint8_t reg_val ;
2015-12-04 17:01:50 +03:00
dev = gpiochip_get_data ( chip ) ;
2009-09-23 03:46:39 +04:00
/*
* There are dedicated registers for GPIO IN / OUT .
* Make sure we return the right value , even when configured as output
*/
if ( test_bit ( off , & dev - > output ) )
2009-10-10 21:54:03 +04:00
adp5520_read ( dev - > master , ADP5520_GPIO_OUT , & reg_val ) ;
2009-09-23 03:46:39 +04:00
else
2009-10-10 21:54:03 +04:00
adp5520_read ( dev - > master , ADP5520_GPIO_IN , & reg_val ) ;
2009-09-23 03:46:39 +04:00
return ! ! ( reg_val & dev - > lut [ off ] ) ;
}
static void adp5520_gpio_set_value ( struct gpio_chip * chip ,
unsigned off , int val )
{
struct adp5520_gpio * dev ;
2015-12-04 17:01:50 +03:00
dev = gpiochip_get_data ( chip ) ;
2009-09-23 03:46:39 +04:00
if ( val )
2009-10-10 21:54:03 +04:00
adp5520_set_bits ( dev - > master , ADP5520_GPIO_OUT , dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
else
2009-10-10 21:54:03 +04:00
adp5520_clr_bits ( dev - > master , ADP5520_GPIO_OUT , dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
}
static int adp5520_gpio_direction_input ( struct gpio_chip * chip , unsigned off )
{
struct adp5520_gpio * dev ;
2015-12-04 17:01:50 +03:00
dev = gpiochip_get_data ( chip ) ;
2009-09-23 03:46:39 +04:00
clear_bit ( off , & dev - > output ) ;
2009-10-10 21:54:03 +04:00
return adp5520_clr_bits ( dev - > master , ADP5520_GPIO_CFG_2 ,
dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
}
static int adp5520_gpio_direction_output ( struct gpio_chip * chip ,
unsigned off , int val )
{
struct adp5520_gpio * dev ;
int ret = 0 ;
2015-12-04 17:01:50 +03:00
dev = gpiochip_get_data ( chip ) ;
2009-09-23 03:46:39 +04:00
set_bit ( off , & dev - > output ) ;
if ( val )
2009-10-10 21:54:03 +04:00
ret | = adp5520_set_bits ( dev - > master , ADP5520_GPIO_OUT ,
dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
else
2009-10-10 21:54:03 +04:00
ret | = adp5520_clr_bits ( dev - > master , ADP5520_GPIO_OUT ,
dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
2009-10-10 21:54:03 +04:00
ret | = adp5520_set_bits ( dev - > master , ADP5520_GPIO_CFG_2 ,
dev - > lut [ off ] ) ;
2009-09-23 03:46:39 +04:00
return ret ;
}
2012-11-19 22:22:34 +04:00
static int adp5520_gpio_probe ( struct platform_device * pdev )
2009-09-23 03:46:39 +04:00
{
2013-07-30 12:08:05 +04:00
struct adp5520_gpio_platform_data * pdata = dev_get_platdata ( & pdev - > dev ) ;
2009-09-23 03:46:39 +04:00
struct adp5520_gpio * dev ;
struct gpio_chip * gc ;
int ret , i , gpios ;
unsigned char ctl_mask = 0 ;
if ( pdata = = NULL ) {
dev_err ( & pdev - > dev , " missing platform data \n " ) ;
return - ENODEV ;
}
if ( pdev - > id ! = ID_ADP5520 ) {
dev_err ( & pdev - > dev , " only ADP5520 supports GPIO \n " ) ;
return - ENODEV ;
}
2013-03-15 13:14:01 +04:00
dev = devm_kzalloc ( & pdev - > dev , sizeof ( * dev ) , GFP_KERNEL ) ;
2014-04-29 12:31:31 +04:00
if ( dev = = NULL )
2009-09-23 03:46:39 +04:00
return - ENOMEM ;
dev - > master = pdev - > dev . parent ;
for ( gpios = 0 , i = 0 ; i < ADP5520_MAXGPIOS ; i + + )
if ( pdata - > gpio_en_mask & ( 1 < < i ) )
dev - > lut [ gpios + + ] = 1 < < i ;
2021-05-14 11:56:27 +03:00
if ( gpios < 1 )
return - EINVAL ;
2009-09-23 03:46:39 +04:00
gc = & dev - > gpio_chip ;
gc - > direction_input = adp5520_gpio_direction_input ;
gc - > direction_output = adp5520_gpio_direction_output ;
gc - > get = adp5520_gpio_get_value ;
gc - > set = adp5520_gpio_set_value ;
2013-12-04 17:42:46 +04:00
gc - > can_sleep = true ;
2009-09-23 03:46:39 +04:00
gc - > base = pdata - > gpio_start ;
gc - > ngpio = gpios ;
gc - > label = pdev - > name ;
gc - > owner = THIS_MODULE ;
2009-10-10 21:54:03 +04:00
ret = adp5520_clr_bits ( dev - > master , ADP5520_GPIO_CFG_1 ,
2009-09-23 03:46:39 +04:00
pdata - > gpio_en_mask ) ;
2009-10-10 21:54:03 +04:00
if ( pdata - > gpio_en_mask & ADP5520_GPIO_C3 )
ctl_mask | = ADP5520_C3_MODE ;
2009-09-23 03:46:39 +04:00
2009-10-10 21:54:03 +04:00
if ( pdata - > gpio_en_mask & ADP5520_GPIO_R3 )
ctl_mask | = ADP5520_R3_MODE ;
2009-09-23 03:46:39 +04:00
if ( ctl_mask )
2009-10-10 21:54:03 +04:00
ret = adp5520_set_bits ( dev - > master , ADP5520_LED_CONTROL ,
2009-09-23 03:46:39 +04:00
ctl_mask ) ;
2009-10-10 21:54:03 +04:00
ret | = adp5520_set_bits ( dev - > master , ADP5520_GPIO_PULLUP ,
2009-09-23 03:46:39 +04:00
pdata - > gpio_pullup_mask ) ;
if ( ret ) {
dev_err ( & pdev - > dev , " failed to write \n " ) ;
2021-05-14 11:56:27 +03:00
return ret ;
2009-09-23 03:46:39 +04:00
}
2021-05-14 11:56:27 +03:00
return devm_gpiochip_add_data ( & pdev - > dev , & dev - > gpio_chip , dev ) ;
2009-09-23 03:46:39 +04:00
}
static struct platform_driver adp5520_gpio_driver = {
. driver = {
. name = " adp5520-gpio " ,
} ,
. probe = adp5520_gpio_probe ,
} ;
2011-12-07 20:24:00 +04:00
module_platform_driver ( adp5520_gpio_driver ) ;
2009-09-23 03:46:39 +04:00
2018-08-14 14:29:18 +03:00
MODULE_AUTHOR ( " Michael Hennerich <michael.hennerich@analog.com> " ) ;
2009-09-23 03:46:39 +04:00
MODULE_DESCRIPTION ( " GPIO ADP5520 Driver " ) ;
MODULE_LICENSE ( " GPL " ) ;
MODULE_ALIAS ( " platform:adp5520-gpio " ) ;