iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/clk/rockchip/clk-pll.c

446 lines
12 KiB
C
Raw Normal View History

clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <asm/div64.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
#include "clk.h"
#define PLL_MODE_MASK 0x3
#define PLL_MODE_SLOW 0x0
#define PLL_MODE_NORM 0x1
#define PLL_MODE_DEEP 0x2
struct rockchip_clk_pll {
struct clk_hw hw;
struct clk_mux pll_mux;
const struct clk_ops *pll_mux_ops;
struct notifier_block clk_nb;
void __iomem *reg_base;
int lock_offset;
unsigned int lock_shift;
enum rockchip_pll_type type;
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:50 +01:00
u8 flags;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
const struct rockchip_pll_rate_table *rate_table;
unsigned int rate_count;
spinlock_t *lock;
};
#define to_rockchip_clk_pll(_hw) container_of(_hw, struct rockchip_clk_pll, hw)
#define to_rockchip_clk_pll_nb(nb) \
container_of(nb, struct rockchip_clk_pll, clk_nb)
static const struct rockchip_pll_rate_table *rockchip_get_pll_settings(
struct rockchip_clk_pll *pll, unsigned long rate)
{
const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
int i;
for (i = 0; i < pll->rate_count; i++) {
if (rate == rate_table[i].rate)
return &rate_table[i];
}
return NULL;
}
static long rockchip_pll_round_rate(struct clk_hw *hw,
unsigned long drate, unsigned long *prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
int i;
/* Assumming rate_table is in descending order */
for (i = 0; i < pll->rate_count; i++) {
if (drate >= rate_table[i].rate)
return rate_table[i].rate;
}
/* return minimum supported value */
return rate_table[i - 1].rate;
}
/*
* Wait for the pll to reach the locked state.
* The calling set_rate function is responsible for making sure the
* grf regmap is available.
*/
static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
{
struct regmap *grf = rockchip_clk_get_grf();
unsigned int val;
int delay = 24000000, ret;
while (delay > 0) {
ret = regmap_read(grf, pll->lock_offset, &val);
if (ret) {
pr_err("%s: failed to read pll lock status: %d\n",
__func__, ret);
return ret;
}
if (val & BIT(pll->lock_shift))
return 0;
delay--;
}
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return -ETIMEDOUT;
}
/**
* PLL used in RK3066, RK3188 and RK3288
*/
#define RK3066_PLL_RESET_DELAY(nr) ((nr * 500) / 24 + 1)
#define RK3066_PLLCON(i) (i * 0x4)
#define RK3066_PLLCON0_OD_MASK 0xf
#define RK3066_PLLCON0_OD_SHIFT 0
#define RK3066_PLLCON0_NR_MASK 0x3f
#define RK3066_PLLCON0_NR_SHIFT 8
#define RK3066_PLLCON1_NF_MASK 0x1fff
#define RK3066_PLLCON1_NF_SHIFT 0
#define RK3066_PLLCON2_BWADJ_MASK 0xfff
#define RK3066_PLLCON2_BWADJ_SHIFT 0
#define RK3066_PLLCON3_RESET (1 << 5)
#define RK3066_PLLCON3_PWRDOWN (1 << 1)
#define RK3066_PLLCON3_BYPASS (1 << 0)
static unsigned long rockchip_rk3066_pll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
u64 nf, nr, no, rate64 = prate;
u32 pllcon;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(3));
if (pllcon & RK3066_PLLCON3_BYPASS) {
pr_debug("%s: pll %s is bypassed\n", __func__,
__clk_get_name(hw->clk));
return prate;
}
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1));
nf = (pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0));
nr = (pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK;
no = (pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK;
rate64 *= (nf + 1);
do_div(rate64, nr + 1);
do_div(rate64, no + 1);
return (unsigned long)rate64;
}
static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate);
struct regmap *grf = rockchip_clk_get_grf();
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 21:07:57 -07:00
struct clk_mux *pll_mux = &pll->pll_mux;
const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
int rate_change_remuxed = 0;
int cur_parent;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
int ret;
if (IS_ERR(grf)) {
pr_debug("%s: grf regmap not available, aborting rate change\n",
__func__);
return PTR_ERR(grf);
}
pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
__func__, __clk_get_name(hw->clk), old_rate, drate, prate);
/* Get required rate settings from table */
rate = rockchip_get_pll_settings(pll, drate);
if (!rate) {
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
drate, __clk_get_name(hw->clk));
return -EINVAL;
}
pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n",
__func__, rate->rate, rate->nr, rate->no, rate->nf);
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 21:07:57 -07:00
cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
if (cur_parent == PLL_MODE_NORM) {
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
rate_change_remuxed = 1;
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
/* enter reset mode */
writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0),
pll->reg_base + RK3066_PLLCON(3));
/* update pll values */
writel(HIWORD_UPDATE(rate->nr - 1, RK3066_PLLCON0_NR_MASK,
RK3066_PLLCON0_NR_SHIFT) |
HIWORD_UPDATE(rate->no - 1, RK3066_PLLCON0_OD_MASK,
RK3066_PLLCON0_OD_SHIFT),
pll->reg_base + RK3066_PLLCON(0));
writel_relaxed(HIWORD_UPDATE(rate->nf - 1, RK3066_PLLCON1_NF_MASK,
RK3066_PLLCON1_NF_SHIFT),
pll->reg_base + RK3066_PLLCON(1));
writel_relaxed(HIWORD_UPDATE(rate->bwadj, RK3066_PLLCON2_BWADJ_MASK,
RK3066_PLLCON2_BWADJ_SHIFT),
pll->reg_base + RK3066_PLLCON(2));
/* leave reset and wait the reset_delay */
writel(HIWORD_UPDATE(0, RK3066_PLLCON3_RESET, 0),
pll->reg_base + RK3066_PLLCON(3));
udelay(RK3066_PLL_RESET_DELAY(rate->nr));
/* wait for the pll to lock */
ret = rockchip_pll_wait_lock(pll);
if (ret) {
pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
__func__, old_rate);
rockchip_rk3066_pll_set_rate(hw, old_rate, prate);
}
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 21:07:57 -07:00
if (rate_change_remuxed)
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
return ret;
}
static int rockchip_rk3066_pll_enable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(0, RK3066_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3066_PLLCON(3));
return 0;
}
static void rockchip_rk3066_pll_disable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(RK3066_PLLCON3_PWRDOWN,
RK3066_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3066_PLLCON(3));
}
static int rockchip_rk3066_pll_is_enabled(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
u32 pllcon = readl(pll->reg_base + RK3066_PLLCON(3));
return !(pllcon & RK3066_PLLCON3_PWRDOWN);
}
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:52 +01:00
static void rockchip_rk3066_pll_init(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
unsigned int nf, nr, no, bwadj;
unsigned long drate;
u32 pllcon;
if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
return;
drate = __clk_get_rate(hw->clk);
rate = rockchip_get_pll_settings(pll, drate);
/* when no rate setting for the current rate, rely on clk_set_rate */
if (!rate)
return;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0));
nr = ((pllcon >> RK3066_PLLCON0_NR_SHIFT) & RK3066_PLLCON0_NR_MASK) + 1;
no = ((pllcon >> RK3066_PLLCON0_OD_SHIFT) & RK3066_PLLCON0_OD_MASK) + 1;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1));
nf = ((pllcon >> RK3066_PLLCON1_NF_SHIFT) & RK3066_PLLCON1_NF_MASK) + 1;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(2));
bwadj = (pllcon >> RK3066_PLLCON2_BWADJ_SHIFT) & RK3066_PLLCON2_BWADJ_MASK;
pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), bwadj(%d:%d)\n",
__func__, __clk_get_name(hw->clk), drate, rate->nr, nr,
rate->no, no, rate->nf, nf, rate->bwadj, bwadj);
if (rate->nr != nr || rate->no != no || rate->nf != nf
|| rate->bwadj != bwadj) {
struct clk *parent = __clk_get_parent(hw->clk);
unsigned long prate;
if (!parent) {
pr_warn("%s: parent of %s not available\n",
__func__, __clk_get_name(hw->clk));
return;
}
pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
__func__, __clk_get_name(hw->clk));
prate = __clk_get_rate(parent);
rockchip_rk3066_pll_set_rate(hw, drate, prate);
}
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = {
.recalc_rate = rockchip_rk3066_pll_recalc_rate,
.enable = rockchip_rk3066_pll_enable,
.disable = rockchip_rk3066_pll_disable,
.is_enabled = rockchip_rk3066_pll_is_enabled,
};
static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
.recalc_rate = rockchip_rk3066_pll_recalc_rate,
.round_rate = rockchip_pll_round_rate,
.set_rate = rockchip_rk3066_pll_set_rate,
.enable = rockchip_rk3066_pll_enable,
.disable = rockchip_rk3066_pll_disable,
.is_enabled = rockchip_rk3066_pll_is_enabled,
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:52 +01:00
.init = rockchip_rk3066_pll_init,
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
};
/*
* Common registering of pll clocks
*/
struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 10:45:51 +02:00
const char *name, const char *const *parent_names,
u8 num_parents, void __iomem *base, int con_offset,
int grf_lock_offset, int lock_shift, int mode_offset,
int mode_shift, struct rockchip_pll_rate_table *rate_table,
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:50 +01:00
u8 clk_pll_flags, spinlock_t *lock)
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
{
const char *pll_parents[3];
struct clk_init_data init;
struct rockchip_clk_pll *pll;
struct clk_mux *pll_mux;
struct clk *pll_clk, *mux_clk;
char pll_name[20];
if (num_parents != 2) {
pr_err("%s: needs two parent clocks\n", __func__);
return ERR_PTR(-EINVAL);
}
/* name the actual pll */
snprintf(pll_name, sizeof(pll_name), "pll_%s", name);
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return ERR_PTR(-ENOMEM);
init.name = pll_name;
/* keep all plls untouched for now */
init.flags = CLK_IGNORE_UNUSED;
init.parent_names = &parent_names[0];
init.num_parents = 1;
if (rate_table) {
int len;
/* find count of rates in rate_table */
for (len = 0; rate_table[len].rate != 0; )
len++;
pll->rate_count = len;
pll->rate_table = kmemdup(rate_table,
pll->rate_count *
sizeof(struct rockchip_pll_rate_table),
GFP_KERNEL);
WARN(!pll->rate_table,
"%s: could not allocate rate table for %s\n",
__func__, name);
}
switch (pll_type) {
case pll_rk3066:
if (!pll->rate_table)
init.ops = &rockchip_rk3066_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3066_pll_clk_ops;
break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, name);
}
pll->hw.init = &init;
pll->type = pll_type;
pll->reg_base = base + con_offset;
pll->lock_offset = grf_lock_offset;
pll->lock_shift = lock_shift;
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:50 +01:00
pll->flags = clk_pll_flags;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
pll->lock = lock;
clk: rockchip: setup pll_mux data earlier In some cases we might need to access the data of the pll mux before the actual mux gets registered - like in the following patch adding an init-callback. Therefore populate pll_mux before registering the core pll-clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 20:38:51 +01:00
/* create the mux on top of the real pll */
pll->pll_mux_ops = &clk_mux_ops;
pll_mux = &pll->pll_mux;
pll_mux->reg = base + mode_offset;
pll_mux->shift = mode_shift;
pll_mux->mask = PLL_MODE_MASK;
pll_mux->flags = 0;
pll_mux->lock = lock;
pll_mux->hw.init = &init;
if (pll_type == pll_rk3066)
pll_mux->flags |= CLK_MUX_HIWORD_MASK;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-03 01:59:10 +02:00
pll_clk = clk_register(NULL, &pll->hw);
if (IS_ERR(pll_clk)) {
pr_err("%s: failed to register pll clock %s : %ld\n",
__func__, name, PTR_ERR(pll_clk));
mux_clk = pll_clk;
goto err_pll;
}
/* the actual muxing is xin24m, pll-output, xin32k */
pll_parents[0] = parent_names[0];
pll_parents[1] = pll_name;
pll_parents[2] = parent_names[1];
init.name = name;
init.flags = CLK_SET_RATE_PARENT;
init.ops = pll->pll_mux_ops;
init.parent_names = pll_parents;
init.num_parents = ARRAY_SIZE(pll_parents);
mux_clk = clk_register(NULL, &pll_mux->hw);
if (IS_ERR(mux_clk))
goto err_mux;
return mux_clk;
err_mux:
clk_unregister(pll_clk);
err_pll:
kfree(pll);
return mux_clk;
}
Reference in New Issue Copy Permalink