iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
4aa6c99d31
linux/drivers/clk/tegra/clk.c

353 lines
8.8 KiB
C
Raw Normal View History

clk: tegra: add Tegra specific clocks Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:20 +04:00
/*
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
clk: tegra: Properly include clk.h Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. Also add in a clkdev.h include that was missing in a file using clkdev APIs. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20 01:00:46 +03:00
#include <linux/clkdev.h>
clk: tegra: add Tegra specific clocks Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:20 +04:00
#include <linux/clk.h>
#include <linux/clk-provider.h>
ARM: tegra: migrate to new clock code Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:26 +04:00
#include <linux/of.h>
#include <linux/clk/tegra.h>
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
#include <linux/reset-controller.h>
ARM: tegra: Move includes to include/soc/tegra In order to not clutter the include/linux directory with SoC specific headers, move the Tegra-specific headers out into a separate directory. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 15:17:24 +04:00
#include <soc/tegra/fuse.h>
clk: tegra: add Tegra specific clocks Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:20 +04:00
#include "clk.h"
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
#define CLK_OUT_ENB_L 0x010
#define CLK_OUT_ENB_H 0x014
#define CLK_OUT_ENB_U 0x018
#define CLK_OUT_ENB_V 0x360
#define CLK_OUT_ENB_W 0x364
#define CLK_OUT_ENB_X 0x280
clk: tegra: Add peripheral registers for bank Y Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-23 12:52:45 +03:00
#define CLK_OUT_ENB_Y 0x298
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
#define CLK_OUT_ENB_SET_L 0x320
#define CLK_OUT_ENB_CLR_L 0x324
#define CLK_OUT_ENB_SET_H 0x328
#define CLK_OUT_ENB_CLR_H 0x32c
#define CLK_OUT_ENB_SET_U 0x330
#define CLK_OUT_ENB_CLR_U 0x334
#define CLK_OUT_ENB_SET_V 0x440
#define CLK_OUT_ENB_CLR_V 0x444
#define CLK_OUT_ENB_SET_W 0x448
#define CLK_OUT_ENB_CLR_W 0x44c
#define CLK_OUT_ENB_SET_X 0x284
#define CLK_OUT_ENB_CLR_X 0x288
clk: tegra: Add peripheral registers for bank Y Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-23 12:52:45 +03:00
#define CLK_OUT_ENB_SET_Y 0x29c
#define CLK_OUT_ENB_CLR_Y 0x2a0
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
#define RST_DEVICES_L 0x004
#define RST_DEVICES_H 0x008
#define RST_DEVICES_U 0x00C
#define RST_DEVICES_V 0x358
#define RST_DEVICES_W 0x35C
#define RST_DEVICES_X 0x28C
clk: tegra: Add peripheral registers for bank Y Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-23 12:52:45 +03:00
#define RST_DEVICES_Y 0x2a4
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
#define RST_DEVICES_SET_L 0x300
#define RST_DEVICES_CLR_L 0x304
#define RST_DEVICES_SET_H 0x308
#define RST_DEVICES_CLR_H 0x30c
#define RST_DEVICES_SET_U 0x310
#define RST_DEVICES_CLR_U 0x314
#define RST_DEVICES_SET_V 0x430
#define RST_DEVICES_CLR_V 0x434
#define RST_DEVICES_SET_W 0x438
#define RST_DEVICES_CLR_W 0x43c
clk: tegra: Add periph regs bank X Tegra124 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-11 18:57:37 +04:00
#define RST_DEVICES_SET_X 0x290
#define RST_DEVICES_CLR_X 0x294
clk: tegra: Add peripheral registers for bank Y Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-23 12:52:45 +03:00
#define RST_DEVICES_SET_Y 0x2a8
#define RST_DEVICES_CLR_Y 0x2ac
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
ARM: tegra: migrate to new clock code Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:26 +04:00
/* Global data of Tegra CPU CAR ops */
clk: tegra: provide dummy cpu car ops tegra_boot_secondary() relies on some of the car ops. This means having an uninitialized tegra_cpu_car_ops will lead to an early boot panic. Providing a dummy struct avoids this and makes adding Tegra114 clock support in a bisectable way a lot easier. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 18:40:35 +04:00
static struct tegra_cpu_car_ops dummy_car_ops;
struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
ARM: tegra: migrate to new clock code Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:26 +04:00
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
int *periph_clk_enb_refcnt;
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
static int periph_banks;
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
static struct clk **clks;
static int clk_num;
static struct clk_onecell_data clk_data;
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
/* Handlers for SoC-specific reset lines */
static int (*special_reset_assert)(unsigned long);
static int (*special_reset_deassert)(unsigned long);
static unsigned int num_special_reset;
clk: tegra: Constify peripheral clock registers The peripheral clock registers are defined in static tables. These tables never need to be modified at runtime, so they can reside in read-only memory. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-20 15:38:39 +03:00
static const struct tegra_clk_periph_regs periph_regs[] = {
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
[0] = {
.enb_reg = CLK_OUT_ENB_L,
.enb_set_reg = CLK_OUT_ENB_SET_L,
.enb_clr_reg = CLK_OUT_ENB_CLR_L,
.rst_reg = RST_DEVICES_L,
.rst_set_reg = RST_DEVICES_SET_L,
.rst_clr_reg = RST_DEVICES_CLR_L,
},
[1] = {
.enb_reg = CLK_OUT_ENB_H,
.enb_set_reg = CLK_OUT_ENB_SET_H,
.enb_clr_reg = CLK_OUT_ENB_CLR_H,
.rst_reg = RST_DEVICES_H,
.rst_set_reg = RST_DEVICES_SET_H,
.rst_clr_reg = RST_DEVICES_CLR_H,
},
[2] = {
.enb_reg = CLK_OUT_ENB_U,
.enb_set_reg = CLK_OUT_ENB_SET_U,
.enb_clr_reg = CLK_OUT_ENB_CLR_U,
.rst_reg = RST_DEVICES_U,
.rst_set_reg = RST_DEVICES_SET_U,
.rst_clr_reg = RST_DEVICES_CLR_U,
},
[3] = {
.enb_reg = CLK_OUT_ENB_V,
.enb_set_reg = CLK_OUT_ENB_SET_V,
.enb_clr_reg = CLK_OUT_ENB_CLR_V,
.rst_reg = RST_DEVICES_V,
.rst_set_reg = RST_DEVICES_SET_V,
.rst_clr_reg = RST_DEVICES_CLR_V,
},
[4] = {
.enb_reg = CLK_OUT_ENB_W,
.enb_set_reg = CLK_OUT_ENB_SET_W,
.enb_clr_reg = CLK_OUT_ENB_CLR_W,
.rst_reg = RST_DEVICES_W,
.rst_set_reg = RST_DEVICES_SET_W,
.rst_clr_reg = RST_DEVICES_CLR_W,
},
clk: tegra: Add periph regs bank X Tegra124 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-11 18:57:37 +04:00
[5] = {
.enb_reg = CLK_OUT_ENB_X,
.enb_set_reg = CLK_OUT_ENB_SET_X,
.enb_clr_reg = CLK_OUT_ENB_CLR_X,
.rst_reg = RST_DEVICES_X,
.rst_set_reg = RST_DEVICES_SET_X,
.rst_clr_reg = RST_DEVICES_CLR_X,
},
clk: tegra: Add peripheral registers for bank Y Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-03-23 12:52:45 +03:00
[6] = {
.enb_reg = CLK_OUT_ENB_Y,
.enb_set_reg = CLK_OUT_ENB_SET_Y,
.enb_clr_reg = CLK_OUT_ENB_CLR_Y,
.rst_reg = RST_DEVICES_Y,
.rst_set_reg = RST_DEVICES_SET_Y,
.rst_clr_reg = RST_DEVICES_CLR_Y,
},
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
};
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
static void __iomem *clk_base;
static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
/*
* If peripheral is on the APB bus then we must read the APB bus to
* flush the write operation in apb bus. This will avoid peripheral
* access after disabling clock. Since the reset driver has no
* knowledge of which reset IDs represent which devices, simply do
* this all the time.
*/
tegra_read_chipid();
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
if (id < periph_banks * 32) {
writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_set_reg);
return 0;
} else if (id < periph_banks * 32 + num_special_reset) {
return special_reset_assert(id);
}
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
return -EINVAL;
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
}
static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
if (id < periph_banks * 32) {
writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_clr_reg);
return 0;
} else if (id < periph_banks * 32 + num_special_reset) {
return special_reset_deassert(id);
}
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
return -EINVAL;
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
}
clk: tegra: Constify peripheral clock registers The peripheral clock registers are defined in static tables. These tables never need to be modified at runtime, so they can reside in read-only memory. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-20 15:38:39 +03:00
const struct tegra_clk_periph_regs *get_reg_bank(int clkid)
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
{
int reg_bank = clkid / 32;
if (reg_bank < periph_banks)
return &periph_regs[reg_bank];
else {
WARN_ON(1);
return NULL;
}
}
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
{
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
clk_base = regs;
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
if (WARN_ON(banks > ARRAY_SIZE(periph_regs)))
return NULL;
periph_clk_enb_refcnt = kzalloc(32 * banks *
sizeof(*periph_clk_enb_refcnt), GFP_KERNEL);
if (!periph_clk_enb_refcnt)
return NULL;
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
periph_banks = banks;
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
clks = kzalloc(num * sizeof(struct clk *), GFP_KERNEL);
if (!clks)
kfree(periph_clk_enb_refcnt);
clk_num = num;
return clks;
clk: tegra: simplify periph clock data This patch determines the register bank for clock enable/disable and reset based on the clock ID instead of hardcoding it in the tables describing the clocks. This results in less data to be maintained in the tables, making the code easier to understand. The full benefit of the change will be realized once also other clocktypes will be table based. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-08-22 19:44:06 +04:00
}
clk: tegra: add Tegra specific clocks Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:20 +04:00
void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max)
{
struct clk *clk;
for (; dup_list->clk_id < clk_max; dup_list++) {
clk = clks[dup_list->clk_id];
dup_list->lookup.clk = clk;
clkdev_add(&dup_list->lookup);
}
}
void __init tegra_init_from_table(struct tegra_clk_init_table *tbl,
struct clk *clks[], int clk_max)
{
struct clk *clk;
for (; tbl->clk_id < clk_max; tbl++) {
clk = clks[tbl->clk_id];
clk: tegra: Make clock initialization more robust Don't abort clock initialization if we cannot match an entry in tegra_clk_init_table to a valid entry in the clk array. Also log a corresponding error message. This was discovered when testing a patch that removed the EMC clock from tegra124_clks but left a mention in tegra_clk_init_table. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
2014-09-17 13:34:17 +04:00
if (IS_ERR_OR_NULL(clk)) {
pr_err("%s: invalid entry %ld in clks array for id %d\n",
__func__, PTR_ERR(clk), tbl->clk_id);
WARN_ON(1);
continue;
}
clk: tegra: add Tegra specific clocks Add Tegra specific clocks, pll, pll_out, peripheral, frac_divider, super. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: alloc sizeof(*foo) not sizeof(struct foo), add comments re: storing pointers to stack variables, make a timeout loop more idiomatic, use _clk_pll_disable() not clk_disable_pll() from _program_pll() to avoid redundant lock operations, unified tegra_clk_periph() and tegra_clk_periph_nodiv(), unified tegra_clk_pll{,e}, rename all clock registration functions so they don't have the same name as the clock structs, return -EINVAL from clk_plle_enable when matching table rate not found, pass ops to _tegra_clk_register_pll rather than a bool.] Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:20 +04:00
if (tbl->parent_id < clk_max) {
struct clk *parent = clks[tbl->parent_id];
if (clk_set_parent(clk, parent)) {
pr_err("%s: Failed to set parent %s of %s\n",
__func__, __clk_get_name(parent),
__clk_get_name(clk));
WARN_ON(1);
}
}
if (tbl->rate)
if (clk_set_rate(clk, tbl->rate)) {
pr_err("%s: Failed to set rate %lu of %s\n",
__func__, tbl->rate,
__clk_get_name(clk));
WARN_ON(1);
}
if (tbl->state)
if (clk_prepare_enable(clk)) {
pr_err("%s: Failed to enable %s\n", __func__,
__clk_get_name(clk));
WARN_ON(1);
}
}
}
ARM: tegra: migrate to new clock code Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-11 11:46:26 +04:00
clk: tegra: Make reset_control_ops const The rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-25 12:45:11 +03:00
static const struct reset_control_ops rst_ops = {
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
.assert = tegra_clk_rst_assert,
.deassert = tegra_clk_rst_deassert,
};
static struct reset_controller_dev rst_ctlr = {
.ops = &rst_ops,
.owner = THIS_MODULE,
.of_reset_n_cells = 1,
};
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
void __init tegra_add_of_provider(struct device_node *np)
{
int i;
for (i = 0; i < clk_num; i++) {
if (IS_ERR(clks[i])) {
pr_err
("Tegra clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
}
if (!clks[i])
clks[i] = ERR_PTR(-EINVAL);
}
clk_data.clks = clks;
clk_data.clk_num = clk_num;
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
rst_ctlr.of_node = np;
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
rst_ctlr.nr_resets = periph_banks * 32 + num_special_reset;
clk: tegra: implement a reset driver The Tegra CAR module implements both a clock and reset controller. So far, the driver exposes the clock feature via the common clock API and the reset feature using a custom API. This patch adds an implementation of the common reset framework API (include/linux/reset*.h). The legacy reset implementation will be removed once all drivers have been converted. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-11-06 04:33:17 +04:00
reset_controller_register(&rst_ctlr);
clk: tegra: common periph_clk_enb_refcnt and clks This patch makes periph_clk_enb_refcnt a global array, dynamically allocated at boottime. It simplifies the macros somewhat and allows clocks common to several Tegra SoCs to be defined in a separate files. Also the clks array becomes global and dynamically allocated which allows the DT registration to be moved to a generic funcion. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-09-02 16:22:02 +04:00
}
clk: tegra: Introduce ability for SoC-specific reset control callbacks This patch allows SoC-specific CAR initialization routines to register their own reset_assert and reset_deassert callbacks with the common Tegra CAR code. If defined, the common code will call these callbacks when a reset control with number >= num_periph_banks * 32 is attempted to be asserted or deasserted respectively. Numbers greater than or equal to num_periph_banks * 32 are used to avoid clashes with low numbers that are automatically mapped to standard CAR reset lines. Each SoC with these special resets should specify the defined reset control numbers in a device tree header file. Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-05-20 09:27:05 +03:00
void __init tegra_init_special_resets(unsigned int num,
int (*assert)(unsigned long),
int (*deassert)(unsigned long))
{
num_special_reset = num;
special_reset_assert = assert;
special_reset_deassert = deassert;
}
clk: tegra: add clkdev registration infra Add a common infra for registering clkdev. This allows decoupling clk registration from clkdev registration. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-10-09 15:47:57 +04:00
void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
{
int i;
for (i = 0; i < num; i++, dev_clks++)
clk_register_clkdev(clks[dev_clks->dt_id], dev_clks->con_id,
dev_clks->dev_id);
clk: tegra: export clock names for debugging When writing a module for testing or debugging purposes, there is no way to get hold of clk handles. This patch solves this by exposing all valid clocks as clkdev's for the virtual device tegra-clk-debug. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-06-26 19:36:13 +04:00
for (i = 0; i < clk_num; i++) {
if (!IS_ERR_OR_NULL(clks[i]))
clk_register_clkdev(clks[i], __clk_get_name(clks[i]),
"tegra-clk-debug");
}
clk: tegra: add clkdev registration infra Add a common infra for registering clkdev. This allows decoupling clk registration from clkdev registration. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-10-09 15:47:57 +04:00
}
clk: tegra: add common infra for DT clocks Introduce a common infrastructure for sharing clock initialization between SoCs. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2013-10-14 17:47:37 +04:00
struct clk ** __init tegra_lookup_dt_id(int clk_id,
struct tegra_clk *tegra_clk)
{
if (tegra_clk[clk_id].present)
return &clks[tegra_clk[clk_id].dt_id];
else
return NULL;
}
clk: tegra: defer application of init table The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-25 23:22:24 +04:00
tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
clk: tegra: make tegra_clocks_apply_init_table() arch_initcall tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2014-12-16 23:38:27 +03:00
static int __init tegra_clocks_apply_init_table(void)
clk: tegra: defer application of init table The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-25 23:22:24 +04:00
{
if (!tegra_clk_apply_init_table)
clk: tegra: make tegra_clocks_apply_init_table() arch_initcall tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2014-12-16 23:38:27 +03:00
return 0;
clk: tegra: defer application of init table The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-25 23:22:24 +04:00
tegra_clk_apply_init_table();
clk: tegra: make tegra_clocks_apply_init_table() arch_initcall tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2014-12-16 23:38:27 +03:00
return 0;
clk: tegra: defer application of init table The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-25 23:22:24 +04:00
}
clk: tegra: make tegra_clocks_apply_init_table() arch_initcall tegra_clocks_apply_init_table() needs to be called after the udelay loop has been calibrated (see commit 441f199a37cfd66c5dd8dd45490bd3ea6971117d ("clk: tegra: defer application of init table") for why that is). On existing Tegra SoCs this was done by calling tegra_clocks_apply_init_table() from tegra_dt_init(). To make this also work on ARM64, we need to change this into an initcall. tegra_dt_init() is called from customize_machine which is an arch_initcall. Therefore this should also work on existing 32bit Tegra SoCs. Tested on Tegra20 (ventana), Tegra30 (beaverboard), Tegra124 (jetson TK1) and Tegra132. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> [paul@pwsan.com: tweaked the commit message] Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com>
2014-12-16 23:38:27 +03:00
arch_initcall(tegra_clocks_apply_init_table);
Reference in New Issue Copy Permalink