2019-05-27 09:55:21 +03:00
// SPDX-License-Identifier: GPL-2.0-only
2016-03-26 00:22:08 +03:00
/*
* Generic stack depot for storing stack traces .
*
* Some debugging tools need to save stack traces of certain events which can
* be later presented to the user . For example , KASAN needs to safe alloc and
* free stacks for each object , but storing two stack traces per object
* requires too much memory ( e . g . SLUB_DEBUG needs 256 bytes per object for
* that ) .
*
* Instead , stack depot maintains a hashtable of unique stacktraces . Since alloc
* and free stacks repeat a lot , we save about 100 x space .
* Stacks are never removed from depot , so we store them contiguously one after
2021-07-08 04:07:31 +03:00
* another in a contiguous memory allocation .
2016-03-26 00:22:08 +03:00
*
* Author : Alexander Potapenko < glider @ google . com >
* Copyright ( C ) 2016 Google , Inc .
*
* Based on code by Dmitry Chernenkov .
*/
2023-02-11 00:15:50 +03:00
# define pr_fmt(fmt) "stackdepot: " fmt
2016-03-26 00:22:08 +03:00
# include <linux/gfp.h>
# include <linux/jhash.h>
# include <linux/kernel.h>
# include <linux/mm.h>
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 09:14:27 +03:00
# include <linux/mutex.h>
2016-03-26 00:22:08 +03:00
# include <linux/percpu.h>
# include <linux/printk.h>
# include <linux/slab.h>
# include <linux/stacktrace.h>
# include <linux/stackdepot.h>
# include <linux/string.h>
# include <linux/types.h>
2021-02-26 04:21:27 +03:00
# include <linux/memblock.h>
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
# include <linux/kasan-enabled.h>
2016-03-26 00:22:08 +03:00
# define DEPOT_STACK_BITS (sizeof(depot_stack_handle_t) * 8)
2016-05-06 02:22:35 +03:00
# define STACK_ALLOC_NULL_PROTECTION_BITS 1
2016-03-26 00:22:08 +03:00
# define STACK_ALLOC_ORDER 2 /* 'Slab' size order for stack depot, 4 pages */
# define STACK_ALLOC_SIZE (1LL << (PAGE_SHIFT + STACK_ALLOC_ORDER))
# define STACK_ALLOC_ALIGN 4
# define STACK_ALLOC_OFFSET_BITS (STACK_ALLOC_ORDER + PAGE_SHIFT - \
STACK_ALLOC_ALIGN )
2016-05-06 02:22:35 +03:00
# define STACK_ALLOC_INDEX_BITS (DEPOT_STACK_BITS - \
2022-09-15 18:03:36 +03:00
STACK_ALLOC_NULL_PROTECTION_BITS - \
STACK_ALLOC_OFFSET_BITS - STACK_DEPOT_EXTRA_BITS )
2016-10-28 03:46:44 +03:00
# define STACK_ALLOC_SLABS_CAP 8192
2016-03-26 00:22:08 +03:00
# define STACK_ALLOC_MAX_SLABS \
( ( ( 1LL < < ( STACK_ALLOC_INDEX_BITS ) ) < STACK_ALLOC_SLABS_CAP ) ? \
( 1LL < < ( STACK_ALLOC_INDEX_BITS ) ) : STACK_ALLOC_SLABS_CAP )
/* The compact structure to store the reference to stacks. */
union handle_parts {
depot_stack_handle_t handle ;
struct {
u32 slabindex : STACK_ALLOC_INDEX_BITS ;
u32 offset : STACK_ALLOC_OFFSET_BITS ;
2016-05-06 02:22:35 +03:00
u32 valid : STACK_ALLOC_NULL_PROTECTION_BITS ;
2022-09-15 18:03:36 +03:00
u32 extra : STACK_DEPOT_EXTRA_BITS ;
2016-03-26 00:22:08 +03:00
} ;
} ;
struct stack_record {
struct stack_record * next ; /* Link in the hashtable */
u32 hash ; /* Hash in the hastable */
u32 size ; /* Number of frames in the stack */
union handle_parts handle ;
2020-12-16 07:43:04 +03:00
unsigned long entries [ ] ; /* Variable-sized array of entries. */
2016-03-26 00:22:08 +03:00
} ;
2023-02-11 00:15:52 +03:00
static bool stack_depot_disabled ;
2023-02-11 00:15:51 +03:00
static bool __stack_depot_early_init_requested __initdata = IS_ENABLED ( CONFIG_STACKDEPOT_ALWAYS_INIT ) ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
static bool __stack_depot_early_init_passed __initdata ;
2023-02-11 00:15:55 +03:00
/* Use one hash table bucket per 16 KB of memory. */
2023-02-11 00:15:56 +03:00
# define STACK_HASH_TABLE_SCALE 14
2023-02-11 00:15:55 +03:00
/* Limit the number of buckets between 4K and 1M. */
2023-02-11 00:15:56 +03:00
# define STACK_BUCKET_NUMBER_ORDER_MIN 12
# define STACK_BUCKET_NUMBER_ORDER_MAX 20
2023-02-11 00:15:55 +03:00
/* Initial seed for jhash2. */
2016-03-26 00:22:08 +03:00
# define STACK_HASH_SEED 0x9747b28c
2023-02-11 00:15:55 +03:00
/* Hash table of pointers to stored stack traces. */
static struct stack_record * * stack_table ;
/* Fixed order of the number of table buckets. Used when KASAN is enabled. */
2023-02-11 00:15:56 +03:00
static unsigned int stack_bucket_number_order ;
2023-02-11 00:15:55 +03:00
/* Hash mask for indexing the table. */
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
static unsigned int stack_hash_mask ;
2023-02-11 00:15:55 +03:00
/* Array of memory regions that store stack traces. */
static void * stack_slabs [ STACK_ALLOC_MAX_SLABS ] ;
/* Currently used slab in stack_slabs. */
static int depot_index ;
/* Offset to the unused space in the currently used slab. */
static size_t depot_offset ;
/* Lock that protects the variables above. */
static DEFINE_RAW_SPINLOCK ( depot_lock ) ;
/* Whether the next slab is initialized. */
static int next_slab_inited ;
2021-02-26 04:21:27 +03:00
2023-02-11 00:15:52 +03:00
static int __init disable_stack_depot ( char * str )
2021-02-26 04:21:27 +03:00
{
2021-02-26 04:21:31 +03:00
int ret ;
2023-02-11 00:15:52 +03:00
ret = kstrtobool ( str , & stack_depot_disabled ) ;
if ( ! ret & & stack_depot_disabled ) {
2023-02-11 00:15:50 +03:00
pr_info ( " disabled \n " ) ;
2021-02-26 04:21:27 +03:00
stack_table = NULL ;
}
return 0 ;
}
2023-02-11 00:15:52 +03:00
early_param ( " stack_depot_disable " , disable_stack_depot ) ;
2021-02-26 04:21:27 +03:00
2023-02-11 00:15:51 +03:00
void __init stack_depot_request_early_init ( void )
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
{
2023-02-11 00:15:51 +03:00
/* Too late to request early init now. */
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
WARN_ON ( __stack_depot_early_init_passed ) ;
2023-02-11 00:15:51 +03:00
__stack_depot_early_init_requested = true ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
}
2023-02-11 00:15:53 +03:00
/* Allocates a hash table via memblock. Can only be used during early boot. */
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
int __init stack_depot_early_init ( void )
{
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
unsigned long entries = 0 ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
2023-02-11 00:15:53 +03:00
/* This function must be called only once, from mm_init(). */
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
if ( WARN_ON ( __stack_depot_early_init_passed ) )
return 0 ;
__stack_depot_early_init_passed = true ;
2023-02-11 00:15:53 +03:00
/*
* If KASAN is enabled , use the maximum order : KASAN is frequently used
* in fuzzing scenarios , which leads to a large number of different
* stack traces being stored in stack depot .
*/
2023-02-11 00:15:56 +03:00
if ( kasan_enabled ( ) & & ! stack_bucket_number_order )
stack_bucket_number_order = STACK_BUCKET_NUMBER_ORDER_MAX ;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
2023-02-11 00:15:52 +03:00
if ( ! __stack_depot_early_init_requested | | stack_depot_disabled )
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
return 0 ;
2023-02-11 00:15:53 +03:00
/*
2023-02-11 00:15:56 +03:00
* If stack_bucket_number_order is not set , leave entries as 0 to rely
* on the automatic calculations performed by alloc_large_system_hash .
2023-02-11 00:15:53 +03:00
*/
2023-02-11 00:15:56 +03:00
if ( stack_bucket_number_order )
entries = 1UL < < stack_bucket_number_order ;
2023-02-11 00:15:53 +03:00
pr_info ( " allocating hash table via alloc_large_system_hash \n " ) ;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
stack_table = alloc_large_system_hash ( " stackdepot " ,
sizeof ( struct stack_record * ) ,
entries ,
2023-02-11 00:15:56 +03:00
STACK_HASH_TABLE_SCALE ,
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
HASH_EARLY | HASH_ZERO ,
NULL ,
& stack_hash_mask ,
2023-02-11 00:15:56 +03:00
1UL < < STACK_BUCKET_NUMBER_ORDER_MIN ,
1UL < < STACK_BUCKET_NUMBER_ORDER_MAX ) ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
if ( ! stack_table ) {
2023-02-11 00:15:50 +03:00
pr_err ( " hash table allocation failed, disabling \n " ) ;
2023-02-11 00:15:52 +03:00
stack_depot_disabled = true ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
return - ENOMEM ;
}
return 0 ;
}
2023-02-11 00:15:53 +03:00
/* Allocates a hash table via kvcalloc. Can be used after boot. */
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
int stack_depot_init ( void )
2021-02-26 04:21:27 +03:00
{
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 09:14:27 +03:00
static DEFINE_MUTEX ( stack_depot_init_mutex ) ;
2023-02-11 00:15:54 +03:00
unsigned long entries ;
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
int ret = 0 ;
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 09:14:27 +03:00
mutex_lock ( & stack_depot_init_mutex ) ;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
2023-02-11 00:15:54 +03:00
if ( stack_depot_disabled | | stack_table )
goto out_unlock ;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
2023-02-11 00:15:54 +03:00
/*
2023-02-11 00:15:56 +03:00
* Similarly to stack_depot_early_init , use stack_bucket_number_order
2023-02-11 00:15:54 +03:00
* if assigned , and rely on automatic scaling otherwise .
*/
2023-02-11 00:15:56 +03:00
if ( stack_bucket_number_order ) {
entries = 1UL < < stack_bucket_number_order ;
2023-02-11 00:15:54 +03:00
} else {
2023-02-11 00:15:56 +03:00
int scale = STACK_HASH_TABLE_SCALE ;
2023-02-11 00:15:54 +03:00
entries = nr_free_buffer_pages ( ) ;
entries = roundup_pow_of_two ( entries ) ;
if ( scale > PAGE_SHIFT )
entries > > = ( scale - PAGE_SHIFT ) ;
else
entries < < = ( PAGE_SHIFT - scale ) ;
2021-02-26 04:21:27 +03:00
}
2023-02-11 00:15:54 +03:00
2023-02-11 00:15:56 +03:00
if ( entries < 1UL < < STACK_BUCKET_NUMBER_ORDER_MIN )
entries = 1UL < < STACK_BUCKET_NUMBER_ORDER_MIN ;
if ( entries > 1UL < < STACK_BUCKET_NUMBER_ORDER_MAX )
entries = 1UL < < STACK_BUCKET_NUMBER_ORDER_MAX ;
2023-02-11 00:15:54 +03:00
pr_info ( " allocating hash table of %lu entries via kvcalloc \n " , entries ) ;
stack_table = kvcalloc ( entries , sizeof ( struct stack_record * ) , GFP_KERNEL ) ;
if ( ! stack_table ) {
pr_err ( " hash table allocation failed, disabling \n " ) ;
stack_depot_disabled = true ;
ret = - ENOMEM ;
goto out_unlock ;
}
stack_hash_mask = entries - 1 ;
out_unlock :
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 09:14:27 +03:00
mutex_unlock ( & stack_depot_init_mutex ) ;
2023-02-11 00:15:54 +03:00
lib/stackdepot: allow requesting early initialization dynamically
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
2022-03-02 14:02:22 +03:00
return ret ;
2021-02-26 04:21:27 +03:00
}
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be
allocated from memblock, even if stack depot ends up not actually used.
The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit.
This is fine for use-cases such as KASAN which is also a config option
and has overhead on its own. But it's an issue for functionality that
has to be actually enabled on boot (page_owner) or depends on hardware
(GPU drivers) and thus the memory might be wasted. This was raised as
an issue [1] when attempting to add stackdepot support for SLUB's debug
object tracking functionality. It's common to build kernels with
CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or
create only specific kmem caches with debugging for testing purposes.
It would thus be more efficient if stackdepot's table was allocated only
when actually going to be used. This patch thus makes the allocation
(and whole stack_depot_init() call) optional:
- Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current
well-defined point of allocation as part of mem_init(). Make
CONFIG_KASAN select this flag.
- Other users have to call stack_depot_init() as part of their own init
when it's determined that stack depot will actually be used. This may
depend on both config and runtime conditions. Convert current users
which are page_owner and several in the DRM subsystem. Same will be
done for SLUB later.
- Because the init might now be called after the boot-time memblock
allocation has given all memory to the buddy allocator, change
stack_depot_init() to allocate stack_table with kvmalloc() when
memblock is no longer available. Also handle allocation failure by
disabling stackdepot (could have theoretically happened even with
memblock allocation previously), and don't unnecessarily align the
memblock allocation to its own size anymore.
[1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com> # stackdepot
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
From: Colin Ian King <colin.king@canonical.com>
Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message
There is a spelling mistake of the work allocation so fix this and
re-phrase the message to make it easier to read.
Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup
On FLATMEM, we call page_ext_init_flatmem_late() just before
kmem_cache_init() which means stack_depot_init() (called by page owner
init) will not recognize properly it should use kvmalloc() and not
memblock_alloc(). memblock_alloc() will also not issue a warning and
return a block memory that can be invalid and cause kernel page fault when
saving stacks, as reported by the kernel test robot [1].
Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so
that slab_is_available() is true during stack_depot_init(). SPARSEMEM
doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(),
but a different page_ext_init() even later in the boot process.
Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue.
While at it, also actually resolve a checkpatch warning in stack_depot_init()
from DRM CI, which was supposed to be in the original patch already.
[1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3
Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended
locks without backoff") landing recently to -next adding a new stack depot
user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate
call to stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Marco Elver <elver@google.com>
Cc: Vijayanand Jitta <vjitta@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Imran Khan <imran.f.khan@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
From: Vlastimil Babka <vbabka@suse.cz>
Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4
Due to 4e66934eaadc ("lib: add reference counting tracking
infrastructure") landing recently to net-next adding a new stack depot
user in lib/ref_tracker.c we need to add an appropriate call to
stack_depot_init() there as well.
Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Jiri Slab <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 09:14:27 +03:00
EXPORT_SYMBOL_GPL ( stack_depot_init ) ;
2016-03-26 00:22:08 +03:00
2023-02-11 00:15:49 +03:00
static bool init_stack_slab ( void * * prealloc )
{
if ( ! * prealloc )
return false ;
/*
* This smp_load_acquire ( ) pairs with smp_store_release ( ) to
* | next_slab_inited | below and in depot_alloc_stack ( ) .
*/
if ( smp_load_acquire ( & next_slab_inited ) )
return true ;
if ( stack_slabs [ depot_index ] = = NULL ) {
stack_slabs [ depot_index ] = * prealloc ;
* prealloc = NULL ;
} else {
/* If this is the last depot slab, do not touch the next one. */
if ( depot_index + 1 < STACK_ALLOC_MAX_SLABS ) {
stack_slabs [ depot_index + 1 ] = * prealloc ;
* prealloc = NULL ;
}
/*
* This smp_store_release pairs with smp_load_acquire ( ) from
* | next_slab_inited | above and in stack_depot_save ( ) .
*/
smp_store_release ( & next_slab_inited , 1 ) ;
}
return true ;
}
/* Allocation of a new stack in raw storage */
static struct stack_record *
depot_alloc_stack ( unsigned long * entries , int size , u32 hash , void * * prealloc )
{
struct stack_record * stack ;
size_t required_size = struct_size ( stack , entries , size ) ;
required_size = ALIGN ( required_size , 1 < < STACK_ALLOC_ALIGN ) ;
if ( unlikely ( depot_offset + required_size > STACK_ALLOC_SIZE ) ) {
if ( unlikely ( depot_index + 1 > = STACK_ALLOC_MAX_SLABS ) ) {
WARN_ONCE ( 1 , " Stack depot reached limit capacity " ) ;
return NULL ;
}
depot_index + + ;
depot_offset = 0 ;
/*
* smp_store_release ( ) here pairs with smp_load_acquire ( ) from
* | next_slab_inited | in stack_depot_save ( ) and
* init_stack_slab ( ) .
*/
if ( depot_index + 1 < STACK_ALLOC_MAX_SLABS )
smp_store_release ( & next_slab_inited , 0 ) ;
}
init_stack_slab ( prealloc ) ;
if ( stack_slabs [ depot_index ] = = NULL )
return NULL ;
stack = stack_slabs [ depot_index ] + depot_offset ;
stack - > hash = hash ;
stack - > size = size ;
stack - > handle . slabindex = depot_index ;
stack - > handle . offset = depot_offset > > STACK_ALLOC_ALIGN ;
stack - > handle . valid = 1 ;
stack - > handle . extra = 0 ;
memcpy ( stack - > entries , entries , flex_array_size ( stack , entries , size ) ) ;
depot_offset + = required_size ;
return stack ;
}
2016-03-26 00:22:08 +03:00
/* Calculate hash for a stack */
static inline u32 hash_stack ( unsigned long * entries , unsigned int size )
{
return jhash2 ( ( u32 * ) entries ,
2020-12-16 07:43:10 +03:00
array_size ( size , sizeof ( * entries ) ) / sizeof ( u32 ) ,
STACK_HASH_SEED ) ;
2016-03-26 00:22:08 +03:00
}
2018-02-07 02:38:24 +03:00
/* Use our own, non-instrumented version of memcmp().
*
* We actually don ' t care about the order , just the equality .
*/
static inline
int stackdepot_memcmp ( const unsigned long * u1 , const unsigned long * u2 ,
unsigned int n )
{
for ( ; n - - ; u1 + + , u2 + + ) {
if ( * u1 ! = * u2 )
return 1 ;
}
return 0 ;
}
2016-03-26 00:22:08 +03:00
/* Find a stack that is equal to the one stored in entries in the hash */
static inline struct stack_record * find_stack ( struct stack_record * bucket ,
unsigned long * entries , int size ,
u32 hash )
{
struct stack_record * found ;
for ( found = bucket ; found ; found = found - > next ) {
if ( found - > hash = = hash & &
found - > size = = size & &
2018-02-07 02:38:24 +03:00
! stackdepot_memcmp ( entries , found - > entries , size ) )
2016-03-26 00:22:08 +03:00
return found ;
}
return NULL ;
}
/**
2021-11-05 23:35:39 +03:00
* __stack_depot_save - Save a stack trace from an array
2019-04-25 12:44:56 +03:00
*
* @ entries : Pointer to storage array
* @ nr_entries : Size of the storage array
2022-09-15 18:03:36 +03:00
* @ extra_bits : Flags to store in unused bits of depot_stack_handle_t
2019-04-25 12:44:56 +03:00
* @ alloc_flags : Allocation gfp flags
2021-11-05 23:35:39 +03:00
* @ can_alloc : Allocate stack slabs ( increased chance of failure if false )
*
* Saves a stack trace from @ entries array of size @ nr_entries . If @ can_alloc is
* % true , is allowed to replenish the stack slab pool in case no space is left
* ( allocates using GFP flags of @ alloc_flags ) . If @ can_alloc is % false , avoids
* any allocations and will fail if no space is left to store the stack trace .
*
2022-01-22 09:14:31 +03:00
* If the stack trace in @ entries is from an interrupt , only the portion up to
* interrupt entry is saved .
*
2022-09-15 18:03:36 +03:00
* Additional opaque flags can be passed in @ extra_bits , stored in the unused
* bits of the stack handle , and retrieved using stack_depot_get_extra_bits ( )
* without calling stack_depot_fetch ( ) .
*
2021-11-05 23:35:39 +03:00
* Context : Any context , but setting @ can_alloc to % false is required if
* alloc_pages ( ) cannot be used from the current context . Currently
* this is the case from contexts where neither % GFP_ATOMIC nor
* % GFP_NOWAIT can be used ( NMI , raw_spin_lock ) .
2016-03-26 00:22:08 +03:00
*
2021-11-05 23:35:39 +03:00
* Return : The handle of the stack struct stored in depot , 0 on failure .
2016-03-26 00:22:08 +03:00
*/
2021-11-05 23:35:39 +03:00
depot_stack_handle_t __stack_depot_save ( unsigned long * entries ,
unsigned int nr_entries ,
2022-09-15 18:03:36 +03:00
unsigned int extra_bits ,
2021-11-05 23:35:39 +03:00
gfp_t alloc_flags , bool can_alloc )
2016-03-26 00:22:08 +03:00
{
struct stack_record * found = NULL , * * bucket ;
2022-09-15 18:03:36 +03:00
union handle_parts retval = { . handle = 0 } ;
2016-03-26 00:22:08 +03:00
struct page * page = NULL ;
void * prealloc = NULL ;
2019-04-25 12:44:56 +03:00
unsigned long flags ;
u32 hash ;
2016-03-26 00:22:08 +03:00
2022-01-22 09:14:31 +03:00
/*
* If this stack trace is from an interrupt , including anything before
* interrupt entry usually leads to unbounded stackdepot growth .
*
* Because use of filter_irq_stacks ( ) is a requirement to ensure
* stackdepot can efficiently deduplicate interrupt stacks , always
* filter_irq_stacks ( ) to simplify all callers ' use of stackdepot .
*/
nr_entries = filter_irq_stacks ( entries , nr_entries ) ;
2023-02-11 00:15:52 +03:00
if ( unlikely ( nr_entries = = 0 ) | | stack_depot_disabled )
2016-03-26 00:22:08 +03:00
goto fast_exit ;
2019-04-25 12:44:56 +03:00
hash = hash_stack ( entries , nr_entries ) ;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing
As Linus explained [1], setting the stackdepot hash table size as a config
option is suboptimal, especially as stackdepot becomes a dependency of
less "expert" subsystems than initially (e.g. DRM, networking,
SLUB_DEBUG):
: (a) it introduces a new compile-time question that isn't sane to ask
: a regular user, but is now exposed to regular users.
: (b) this by default uses 1MB of memory for a feature that didn't in
: the past, so now if you have small machines you need to make sure you
: make a special kernel config for them.
Ideally we would employ rhashtable for fully automatic resizing, which
should be feasible for many of the new users, but problematic for the
original users with restricted context that call __stack_depot_save() with
can_alloc == false, i.e. KASAN.
However we can easily remove the config option and scale the hash table
automatically with system memory. The STACK_HASH_MASK constant becomes
stack_hash_mask variable and is used only in one mask operation, so the
overhead should be negligible to none. For early allocation we can employ
the existing alloc_large_system_hash() function and perform similar
scaling for the late allocation.
The existing limits of the config option (between 4k and 1M buckets) are
preserved, and scaling factor is set to one bucket per 16kB memory so on
64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while
a 1GB system will use 512kB.
Because KASAN is reported to need the maximum number of buckets even with
smaller amounts of memory [2], set it as such when kasan_enabled().
If needed, the automatic scaling could be complemented with a boot-time
kernel parameter, but it feels pointless to add it without a specific use
case.
[1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/
[2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-20 18:02:49 +03:00
bucket = & stack_table [ hash & stack_hash_mask ] ;
2016-03-26 00:22:08 +03:00
/*
* Fast path : look the stack trace up without locking .
* The smp_load_acquire ( ) here pairs with smp_store_release ( ) to
* | bucket | below .
*/
2019-04-25 12:44:56 +03:00
found = find_stack ( smp_load_acquire ( bucket ) , entries ,
nr_entries , hash ) ;
2016-03-26 00:22:08 +03:00
if ( found )
goto exit ;
/*
* Check if the current or the next stack slab need to be initialized .
* If so , allocate the memory - we won ' t be able to do that under the
* lock .
*
* The smp_load_acquire ( ) here pairs with smp_store_release ( ) to
* | next_slab_inited | in depot_alloc_stack ( ) and init_stack_slab ( ) .
*/
2021-11-05 23:35:39 +03:00
if ( unlikely ( can_alloc & & ! smp_load_acquire ( & next_slab_inited ) ) ) {
2016-03-26 00:22:08 +03:00
/*
* Zero out zone modifiers , as we don ' t have specific zone
* requirements . Keep the flags related to allocation in atomic
* contexts and I / O .
*/
alloc_flags & = ~ GFP_ZONEMASK ;
alloc_flags & = ( GFP_ATOMIC | GFP_KERNEL ) ;
2016-07-29 01:49:10 +03:00
alloc_flags | = __GFP_NOWARN ;
2016-03-26 00:22:08 +03:00
page = alloc_pages ( alloc_flags , STACK_ALLOC_ORDER ) ;
if ( page )
prealloc = page_address ( page ) ;
}
2021-05-07 04:03:40 +03:00
raw_spin_lock_irqsave ( & depot_lock , flags ) ;
2016-03-26 00:22:08 +03:00
2019-04-25 12:44:56 +03:00
found = find_stack ( * bucket , entries , nr_entries , hash ) ;
2016-03-26 00:22:08 +03:00
if ( ! found ) {
2021-11-05 23:35:36 +03:00
struct stack_record * new = depot_alloc_stack ( entries , nr_entries , hash , & prealloc ) ;
2016-03-26 00:22:08 +03:00
if ( new ) {
new - > next = * bucket ;
/*
* This smp_store_release ( ) pairs with
* smp_load_acquire ( ) from | bucket | above .
*/
smp_store_release ( bucket , new ) ;
found = new ;
}
} else if ( prealloc ) {
/*
* We didn ' t need to store this stack trace , but let ' s keep
* the preallocated memory for the future .
*/
WARN_ON ( ! init_stack_slab ( & prealloc ) ) ;
}
2021-05-07 04:03:40 +03:00
raw_spin_unlock_irqrestore ( & depot_lock , flags ) ;
2016-03-26 00:22:08 +03:00
exit :
if ( prealloc ) {
/* Nobody used this memory, ok to free it. */
free_pages ( ( unsigned long ) prealloc , STACK_ALLOC_ORDER ) ;
}
if ( found )
2022-09-15 18:03:36 +03:00
retval . handle = found - > handle . handle ;
2016-03-26 00:22:08 +03:00
fast_exit :
2022-09-15 18:03:36 +03:00
retval . extra = extra_bits ;
return retval . handle ;
2016-03-26 00:22:08 +03:00
}
2021-11-05 23:35:39 +03:00
EXPORT_SYMBOL_GPL ( __stack_depot_save ) ;
/**
* stack_depot_save - Save a stack trace from an array
*
* @ entries : Pointer to storage array
* @ nr_entries : Size of the storage array
* @ alloc_flags : Allocation gfp flags
*
* Context : Contexts where allocations via alloc_pages ( ) are allowed .
* See __stack_depot_save ( ) for more details .
*
* Return : The handle of the stack struct stored in depot , 0 on failure .
*/
depot_stack_handle_t stack_depot_save ( unsigned long * entries ,
unsigned int nr_entries ,
gfp_t alloc_flags )
{
2022-09-15 18:03:36 +03:00
return __stack_depot_save ( entries , nr_entries , 0 , alloc_flags , true ) ;
2021-11-05 23:35:39 +03:00
}
2019-04-25 12:44:56 +03:00
EXPORT_SYMBOL_GPL ( stack_depot_save ) ;
2023-02-11 00:15:49 +03:00
/**
* stack_depot_fetch - Fetch stack entries from a depot
*
* @ handle : Stack depot handle which was returned from
* stack_depot_save ( ) .
* @ entries : Pointer to store the entries address
*
* Return : The number of trace entries for this depot .
*/
unsigned int stack_depot_fetch ( depot_stack_handle_t handle ,
unsigned long * * entries )
{
union handle_parts parts = { . handle = handle } ;
void * slab ;
size_t offset = parts . offset < < STACK_ALLOC_ALIGN ;
struct stack_record * stack ;
* entries = NULL ;
if ( ! handle )
return 0 ;
if ( parts . slabindex > depot_index ) {
WARN ( 1 , " slab index %d out of bounds (%d) for stack id %08x \n " ,
parts . slabindex , depot_index , handle ) ;
return 0 ;
}
slab = stack_slabs [ parts . slabindex ] ;
if ( ! slab )
return 0 ;
stack = slab + offset ;
* entries = stack - > entries ;
return stack - > size ;
}
EXPORT_SYMBOL_GPL ( stack_depot_fetch ) ;
/**
* stack_depot_print - print stack entries from a depot
*
* @ stack : Stack depot handle which was returned from
* stack_depot_save ( ) .
*
*/
void stack_depot_print ( depot_stack_handle_t stack )
{
unsigned long * entries ;
unsigned int nr_entries ;
nr_entries = stack_depot_fetch ( stack , & entries ) ;
if ( nr_entries > 0 )
stack_trace_print ( entries , nr_entries , 0 ) ;
}
EXPORT_SYMBOL_GPL ( stack_depot_print ) ;
/**
* stack_depot_snprint - print stack entries from a depot into a buffer
*
* @ handle : Stack depot handle which was returned from
* stack_depot_save ( ) .
* @ buf : Pointer to the print buffer
*
* @ size : Size of the print buffer
*
* @ spaces : Number of leading spaces to print
*
* Return : Number of bytes printed .
*/
int stack_depot_snprint ( depot_stack_handle_t handle , char * buf , size_t size ,
int spaces )
{
unsigned long * entries ;
unsigned int nr_entries ;
nr_entries = stack_depot_fetch ( handle , & entries ) ;
return nr_entries ? stack_trace_snprint ( buf , size , entries , nr_entries ,
spaces ) : 0 ;
}
EXPORT_SYMBOL_GPL ( stack_depot_snprint ) ;
unsigned int stack_depot_get_extra_bits ( depot_stack_handle_t handle )
{
union handle_parts parts = { . handle = handle } ;
return parts . extra ;
}
EXPORT_SYMBOL ( stack_depot_get_extra_bits ) ;