linux/drivers/dax/super.c

764 lines
18 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2017 Intel Corporation. All rights reserved.
*/
#include <linux/pagemap.h>
#include <linux/module.h>
#include <linux/mount.h>
#include <linux/pseudo_fs.h>
#include <linux/magic.h>
#include <linux/genhd.h>
dax: require 'struct page' by default for filesystem dax If a dax buffer from a device that does not map pages is passed to read(2) or write(2) as a target for direct-I/O it triggers SIGBUS. If gdb attempts to examine the contents of a dax buffer from a device that does not map pages it triggers SIGBUS. If fork(2) is called on a process with a dax mapping from a device that does not map pages it triggers SIGBUS. 'struct page' is required otherwise several kernel code paths break in surprising ways. Disable filesystem-dax on devices that do not map pages. In addition to needing pfn_to_page() to be valid we also require devmap pages. We need this to detect dax pages in the get_user_pages_fast() path and so that we can stop managing the VM_MIXEDMAP flag. For DAX drivers that have not supported get_user_pages() to date we allow them to opt-in to supporting DAX with the CONFIG_FS_DAX_LIMITED configuration option which requires ->direct_access() to return pfn_t_special() pfns. This leaves DAX support in brd disabled and scheduled for removal. Note that when the initial dax support was being merged a few years back there was concern that struct page was unsuitable for use with next generation persistent memory devices. The theoretical concern was that struct page access, being such a hotly used data structure in the kernel, would lead to media wear out. While that was a reasonable conservative starting position it has not held true in practice. We have long since committed to using devm_memremap_pages() to support higher order kernel functionality that needs get_user_pages() and pfn_to_page(). Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-14 21:33:32 +03:00
#include <linux/pfn_t.h>
#include <linux/cdev.h>
#include <linux/hash.h>
#include <linux/slab.h>
#include <linux/uio.h>
#include <linux/dax.h>
#include <linux/fs.h>
#include "dax-private.h"
static dev_t dax_devt;
DEFINE_STATIC_SRCU(dax_srcu);
static struct vfsmount *dax_mnt;
static DEFINE_IDA(dax_minor_ida);
static struct kmem_cache *dax_cache __read_mostly;
static struct super_block *dax_superblock __read_mostly;
#define DAX_HASH_SIZE (PAGE_SIZE / sizeof(struct hlist_head))
static struct hlist_head dax_host_list[DAX_HASH_SIZE];
static DEFINE_SPINLOCK(dax_host_lock);
int dax_read_lock(void)
{
return srcu_read_lock(&dax_srcu);
}
EXPORT_SYMBOL_GPL(dax_read_lock);
void dax_read_unlock(int id)
{
srcu_read_unlock(&dax_srcu, id);
}
EXPORT_SYMBOL_GPL(dax_read_unlock);
#ifdef CONFIG_BLOCK
#include <linux/blkdev.h>
int bdev_dax_pgoff(struct block_device *bdev, sector_t sector, size_t size,
pgoff_t *pgoff)
{
sector_t start_sect = bdev ? get_start_sect(bdev) : 0;
phys_addr_t phys_off = (start_sect + sector) * 512;
if (pgoff)
*pgoff = PHYS_PFN(phys_off);
if (phys_off % PAGE_SIZE || size % PAGE_SIZE)
return -EINVAL;
return 0;
}
EXPORT_SYMBOL(bdev_dax_pgoff);
#if IS_ENABLED(CONFIG_FS_DAX)
struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev)
{
if (!blk_queue_dax(bdev->bd_disk->queue))
return NULL;
return dax_get_by_host(bdev->bd_disk->disk_name);
}
EXPORT_SYMBOL_GPL(fs_dax_get_by_bdev);
#endif
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
bool __generic_fsdax_supported(struct dax_device *dax_dev,
struct block_device *bdev, int blocksize, sector_t start,
sector_t sectors)
{
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
bool dax_enabled = false;
pgoff_t pgoff, pgoff_end;
char buf[BDEVNAME_SIZE];
void *kaddr, *end_kaddr;
pfn_t pfn, end_pfn;
sector_t last_page;
long len, len2;
int err, id;
if (blocksize != PAGE_SIZE) {
dax: print error message by pr_info() in __generic_fsdax_supported() In struct dax_operations, the callback routine dax_supported() returns a bool type result. For false return value, the caller has no idea whether the device does not support dax at all, or it is just some mis- configuration issue. An example is formatting an Ext4 file system on pmem device on top of a NVDIMM namespace by, # mkfs.ext4 /dev/pmem0 If the fs block size does not match kernel space memory page size (which is possible on non-x86 platform), mount this Ext4 file system will fail, # mount -o dax /dev/pmem0 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error. And from the dmesg output there is only the following information, [ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device. The above information is quite confusing. Because definitely the pmem0 device supports dax operation, and the super block is consistent as how it was created by mkfs.ext4. Indeed the failure is from __generic_fsdax_supported() by the following code piece, if (blocksize != PAGE_SIZE) { pr_debug("%s: error: unsupported blocksize for dax\n", bdevname(bdev, buf)); return false; } It is because the Ext4 block size is 4KB and kernel page size is 8KB or 16KB. It is not simple to make dax_supported() from struct dax_operations or __generic_fsdax_supported() to return exact failure type right now. So the simplest fix is to use pr_info() to print all the error messages inside __generic_fsdax_supported(). Then users may find informative clue from the kernel message at least. Message printed by pr_debug() is very easy to be ignored by users. This patch prints error message by pr_info() in __generic_fsdax_supported(), when then mount fails, following lines can be found from dmesg output, [ 2705.500885] pmem0: error: unsupported blocksize for dax [ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device. Now the users may have idea the mount failure is from pmem driver for unsupported block size. Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anthony Iliopoulos <ailiopoulos@suse.com> Reported-by: Michal Suchanek <msuchanek@suse.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25 19:24:50 +03:00
pr_info("%s: error: unsupported blocksize for dax\n",
bdevname(bdev, buf));
return false;
}
dax: Fix stack overflow when mounting fsdax pmem device When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system: ext4_fill_super bdev_dax_supported __bdev_dax_supported dax_supported generic_fsdax_supported __generic_fsdax_supported bdev_dax_supported The call path leads to the infinite calling loop, so we cannot call bdev_dax_supported() in __generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the two bdev_dax_pgoff() checks [3][4]. [1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/ [2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/ [3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/ [4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/ Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: Coly Li <colyli@suse.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Pittman <jpittman@redhat.com> Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-17 14:15:49 +03:00
if (!dax_dev) {
pr_debug("%s: error: dax unsupported by block device\n",
bdevname(bdev, buf));
return false;
}
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
err = bdev_dax_pgoff(bdev, start, PAGE_SIZE, &pgoff);
if (err) {
dax: print error message by pr_info() in __generic_fsdax_supported() In struct dax_operations, the callback routine dax_supported() returns a bool type result. For false return value, the caller has no idea whether the device does not support dax at all, or it is just some mis- configuration issue. An example is formatting an Ext4 file system on pmem device on top of a NVDIMM namespace by, # mkfs.ext4 /dev/pmem0 If the fs block size does not match kernel space memory page size (which is possible on non-x86 platform), mount this Ext4 file system will fail, # mount -o dax /dev/pmem0 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error. And from the dmesg output there is only the following information, [ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device. The above information is quite confusing. Because definitely the pmem0 device supports dax operation, and the super block is consistent as how it was created by mkfs.ext4. Indeed the failure is from __generic_fsdax_supported() by the following code piece, if (blocksize != PAGE_SIZE) { pr_debug("%s: error: unsupported blocksize for dax\n", bdevname(bdev, buf)); return false; } It is because the Ext4 block size is 4KB and kernel page size is 8KB or 16KB. It is not simple to make dax_supported() from struct dax_operations or __generic_fsdax_supported() to return exact failure type right now. So the simplest fix is to use pr_info() to print all the error messages inside __generic_fsdax_supported(). Then users may find informative clue from the kernel message at least. Message printed by pr_debug() is very easy to be ignored by users. This patch prints error message by pr_info() in __generic_fsdax_supported(), when then mount fails, following lines can be found from dmesg output, [ 2705.500885] pmem0: error: unsupported blocksize for dax [ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device. Now the users may have idea the mount failure is from pmem driver for unsupported block size. Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anthony Iliopoulos <ailiopoulos@suse.com> Reported-by: Michal Suchanek <msuchanek@suse.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25 19:24:50 +03:00
pr_info("%s: error: unaligned partition for dax\n",
bdevname(bdev, buf));
return false;
}
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
last_page = PFN_DOWN((start + sectors - 1) * 512) * PAGE_SIZE / 512;
err = bdev_dax_pgoff(bdev, last_page, PAGE_SIZE, &pgoff_end);
if (err) {
dax: print error message by pr_info() in __generic_fsdax_supported() In struct dax_operations, the callback routine dax_supported() returns a bool type result. For false return value, the caller has no idea whether the device does not support dax at all, or it is just some mis- configuration issue. An example is formatting an Ext4 file system on pmem device on top of a NVDIMM namespace by, # mkfs.ext4 /dev/pmem0 If the fs block size does not match kernel space memory page size (which is possible on non-x86 platform), mount this Ext4 file system will fail, # mount -o dax /dev/pmem0 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error. And from the dmesg output there is only the following information, [ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device. The above information is quite confusing. Because definitely the pmem0 device supports dax operation, and the super block is consistent as how it was created by mkfs.ext4. Indeed the failure is from __generic_fsdax_supported() by the following code piece, if (blocksize != PAGE_SIZE) { pr_debug("%s: error: unsupported blocksize for dax\n", bdevname(bdev, buf)); return false; } It is because the Ext4 block size is 4KB and kernel page size is 8KB or 16KB. It is not simple to make dax_supported() from struct dax_operations or __generic_fsdax_supported() to return exact failure type right now. So the simplest fix is to use pr_info() to print all the error messages inside __generic_fsdax_supported(). Then users may find informative clue from the kernel message at least. Message printed by pr_debug() is very easy to be ignored by users. This patch prints error message by pr_info() in __generic_fsdax_supported(), when then mount fails, following lines can be found from dmesg output, [ 2705.500885] pmem0: error: unsupported blocksize for dax [ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device. Now the users may have idea the mount failure is from pmem driver for unsupported block size. Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anthony Iliopoulos <ailiopoulos@suse.com> Reported-by: Michal Suchanek <msuchanek@suse.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25 19:24:50 +03:00
pr_info("%s: error: unaligned partition for dax\n",
bdevname(bdev, buf));
dax: do not print error message for non-persistent memory block device Commit 231609785cbf ("dax: print error message by pr_info() in __generic_fsdax_supported()") happens to print the following error message during booting when the non-persistent memory block devices are configured by device mapper. Those error messages are caused by the variable 'dax_dev' is NULL. Users might be confused with those error messages since they do not use the persistent memory device. Moreover, users might scare about "what's wrong with my disks" because they see the 'error' and 'failed' keywords. # dmesg | grep fail sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdk3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) sdb3: error: dax access failed (-95) # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 1.1T 0 disk ├─sda1 8:1 0 156M 0 part ├─sda2 8:2 0 40G 0 part └─sda3 8:3 0 1.1T 0 part sdb 8:16 0 1.1T 0 disk ├─sdb1 8:17 0 600M 0 part ├─sdb2 8:18 0 1G 0 part └─sdb3 8:19 0 1.1T 0 part ├─rhel00-swap 254:3 0 4G 0 lvm ├─rhel00-home 254:4 0 1T 0 lvm └─rhel00-root 254:5 0 50G 0 lvm sdc 8:32 0 1.1T 0 disk sdd 8:48 0 1.1T 0 disk sde 8:64 0 1.1T 0 disk sdf 8:80 0 1.1T 0 disk sdg 8:96 0 1.1T 0 disk sdh 8:112 0 3.3T 0 disk ├─sdh1 8:113 0 500M 0 part /boot/efi ├─sdh2 8:114 0 40G 0 part / ├─sdh3 8:115 0 2.9T 0 part /home └─sdh4 8:116 0 314.6G 0 part [SWAP] sdi 8:128 0 1.1T 0 disk sdj 8:144 0 3.3T 0 disk ├─sdj1 8:145 0 512M 0 part └─sdj2 8:146 0 3.3T 0 part sdk 8:160 0 119.2G 0 disk ├─sdk1 8:161 0 200M 0 part ├─sdk2 8:162 0 1G 0 part └─sdk3 8:163 0 118G 0 part ├─rhel-swap 254:0 0 4G 0 lvm ├─rhel-home 254:1 0 64G 0 lvm └─rhel-root 254:2 0 50G 0 lvm sdl 8:176 0 119.2G 0 disk The call path is shown as follows: dm_table_determine_type dm_table_supports_dax device_supports_dax generic_fsdax_supported __generic_fsdax_supported With the disk configuration listing from the command 'lsblk', the member 'dev->dax_dev' of the block devices 'sdb3' and 'sdk3' (configured by device mapper) is NULL in function generic_fsdax_supported() because the member is configured in function open_table_device(). To prevent the confusing error messages in this scenario (this is normal behavior), just print those error messages by pr_debug() by checking if dax_dev is NULL and the block device does not support DAX. Link: https://lore.kernel.org/r/20200819154236.24191-1-adrianhuang0701@gmail.com Fixes: 231609785cbf ("dax: print error message by pr_info() in __generic_fsdax_supported()") Cc: Coly Li <colyli@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-08-19 18:42:36 +03:00
return false;
}
id = dax_read_lock();
len = dax_direct_access(dax_dev, pgoff, 1, &kaddr, &pfn);
len2 = dax_direct_access(dax_dev, pgoff_end, 1, &end_kaddr, &end_pfn);
if (len < 1 || len2 < 1) {
dax: print error message by pr_info() in __generic_fsdax_supported() In struct dax_operations, the callback routine dax_supported() returns a bool type result. For false return value, the caller has no idea whether the device does not support dax at all, or it is just some mis- configuration issue. An example is formatting an Ext4 file system on pmem device on top of a NVDIMM namespace by, # mkfs.ext4 /dev/pmem0 If the fs block size does not match kernel space memory page size (which is possible on non-x86 platform), mount this Ext4 file system will fail, # mount -o dax /dev/pmem0 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error. And from the dmesg output there is only the following information, [ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device. The above information is quite confusing. Because definitely the pmem0 device supports dax operation, and the super block is consistent as how it was created by mkfs.ext4. Indeed the failure is from __generic_fsdax_supported() by the following code piece, if (blocksize != PAGE_SIZE) { pr_debug("%s: error: unsupported blocksize for dax\n", bdevname(bdev, buf)); return false; } It is because the Ext4 block size is 4KB and kernel page size is 8KB or 16KB. It is not simple to make dax_supported() from struct dax_operations or __generic_fsdax_supported() to return exact failure type right now. So the simplest fix is to use pr_info() to print all the error messages inside __generic_fsdax_supported(). Then users may find informative clue from the kernel message at least. Message printed by pr_debug() is very easy to be ignored by users. This patch prints error message by pr_info() in __generic_fsdax_supported(), when then mount fails, following lines can be found from dmesg output, [ 2705.500885] pmem0: error: unsupported blocksize for dax [ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device. Now the users may have idea the mount failure is from pmem driver for unsupported block size. Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anthony Iliopoulos <ailiopoulos@suse.com> Reported-by: Michal Suchanek <msuchanek@suse.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25 19:24:50 +03:00
pr_info("%s: error: dax access failed (%ld)\n",
bdevname(bdev, buf), len < 1 ? len : len2);
dax_read_unlock(id);
return false;
}
if (IS_ENABLED(CONFIG_FS_DAX_LIMITED) && pfn_t_special(pfn)) {
/*
* An arch that has enabled the pmem api should also
* have its drivers support pfn_t_devmap()
*
* This is a developer warning and should not trigger in
* production. dax_flush() will crash since it depends
* on being able to do (page_address(pfn_to_page())).
*/
WARN_ON(IS_ENABLED(CONFIG_ARCH_HAS_PMEM_API));
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
dax_enabled = true;
} else if (pfn_t_devmap(pfn) && pfn_t_devmap(end_pfn)) {
struct dev_pagemap *pgmap, *end_pgmap;
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
pgmap = get_dev_pagemap(pfn_t_to_pfn(pfn), NULL);
end_pgmap = get_dev_pagemap(pfn_t_to_pfn(end_pfn), NULL);
if (pgmap && pgmap == end_pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX
&& pfn_t_to_page(pfn)->pgmap == pgmap
&& pfn_t_to_page(end_pfn)->pgmap == pgmap
&& pfn_t_to_pfn(pfn) == PHYS_PFN(__pa(kaddr))
&& pfn_t_to_pfn(end_pfn) == PHYS_PFN(__pa(end_kaddr)))
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
dax_enabled = true;
put_dev_pagemap(pgmap);
put_dev_pagemap(end_pgmap);
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
}
dax_read_unlock(id);
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-16 21:46:08 +03:00
if (!dax_enabled) {
dax: print error message by pr_info() in __generic_fsdax_supported() In struct dax_operations, the callback routine dax_supported() returns a bool type result. For false return value, the caller has no idea whether the device does not support dax at all, or it is just some mis- configuration issue. An example is formatting an Ext4 file system on pmem device on top of a NVDIMM namespace by, # mkfs.ext4 /dev/pmem0 If the fs block size does not match kernel space memory page size (which is possible on non-x86 platform), mount this Ext4 file system will fail, # mount -o dax /dev/pmem0 /mnt mount: /mnt: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error. And from the dmesg output there is only the following information, [ 307.853148] EXT4-fs (pmem0): DAX unsupported by block device. The above information is quite confusing. Because definitely the pmem0 device supports dax operation, and the super block is consistent as how it was created by mkfs.ext4. Indeed the failure is from __generic_fsdax_supported() by the following code piece, if (blocksize != PAGE_SIZE) { pr_debug("%s: error: unsupported blocksize for dax\n", bdevname(bdev, buf)); return false; } It is because the Ext4 block size is 4KB and kernel page size is 8KB or 16KB. It is not simple to make dax_supported() from struct dax_operations or __generic_fsdax_supported() to return exact failure type right now. So the simplest fix is to use pr_info() to print all the error messages inside __generic_fsdax_supported(). Then users may find informative clue from the kernel message at least. Message printed by pr_debug() is very easy to be ignored by users. This patch prints error message by pr_info() in __generic_fsdax_supported(), when then mount fails, following lines can be found from dmesg output, [ 2705.500885] pmem0: error: unsupported blocksize for dax [ 2705.500888] EXT4-fs (pmem0): DAX unsupported by block device. Now the users may have idea the mount failure is from pmem driver for unsupported block size. Link: https://lore.kernel.org/r/20200725162450.95999-1-colyli@suse.de Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anthony Iliopoulos <ailiopoulos@suse.com> Reported-by: Michal Suchanek <msuchanek@suse.com> Suggested-by: Jan Kara <jack@suse.com> Reviewed-by: Jan Kara <jack@suse.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2020-07-25 19:24:50 +03:00
pr_info("%s: error: dax support not enabled\n",
bdevname(bdev, buf));
return false;
dax: require 'struct page' by default for filesystem dax If a dax buffer from a device that does not map pages is passed to read(2) or write(2) as a target for direct-I/O it triggers SIGBUS. If gdb attempts to examine the contents of a dax buffer from a device that does not map pages it triggers SIGBUS. If fork(2) is called on a process with a dax mapping from a device that does not map pages it triggers SIGBUS. 'struct page' is required otherwise several kernel code paths break in surprising ways. Disable filesystem-dax on devices that do not map pages. In addition to needing pfn_to_page() to be valid we also require devmap pages. We need this to detect dax pages in the get_user_pages_fast() path and so that we can stop managing the VM_MIXEDMAP flag. For DAX drivers that have not supported get_user_pages() to date we allow them to opt-in to supporting DAX with the CONFIG_FS_DAX_LIMITED configuration option which requires ->direct_access() to return pfn_t_special() pfns. This leaves DAX support in brd disabled and scheduled for removal. Note that when the initial dax support was being merged a few years back there was concern that struct page was unsuitable for use with next generation persistent memory devices. The theoretical concern was that struct page access, being such a hotly used data structure in the kernel, would lead to media wear out. While that was a reasonable conservative starting position it has not held true in practice. We have long since committed to using devm_memremap_pages() to support higher order kernel functionality that needs get_user_pages() and pfn_to_page(). Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-14 21:33:32 +03:00
}
return true;
}
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
EXPORT_SYMBOL_GPL(__generic_fsdax_supported);
/**
* __bdev_dax_supported() - Check if the device supports dax for filesystem
* @bdev: block device to check
* @blocksize: The block size of the device
*
* This is a library function for filesystems to check if the block device
* can be mounted with dax option.
*
* Return: true if supported, false if unsupported
*/
bool __bdev_dax_supported(struct block_device *bdev, int blocksize)
{
struct dax_device *dax_dev;
struct request_queue *q;
char buf[BDEVNAME_SIZE];
bool ret;
int id;
q = bdev_get_queue(bdev);
if (!q || !blk_queue_dax(q)) {
pr_debug("%s: error: request queue doesn't support dax\n",
bdevname(bdev, buf));
return false;
}
dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
if (!dax_dev) {
pr_debug("%s: error: device does not support dax\n",
bdevname(bdev, buf));
return false;
}
id = dax_read_lock();
ret = dax_supported(dax_dev, bdev, blocksize, 0,
i_size_read(bdev->bd_inode) / 512);
dax_read_unlock(id);
put_dax(dax_dev);
return ret;
}
EXPORT_SYMBOL_GPL(__bdev_dax_supported);
#endif
enum dax_device_flags {
/* !alive + rcu grace period == no new operations / mappings */
DAXDEV_ALIVE,
/* gate whether dax_flush() calls the low level flush routine */
DAXDEV_WRITE_CACHE,
/* flag to check if device supports synchronous flush */
DAXDEV_SYNC,
};
/**
* struct dax_device - anchor object for dax services
* @inode: core vfs
* @cdev: optional character interface for "device dax"
* @host: optional name for lookups where the device path is not available
* @private: dax driver private data
* @flags: state and boolean properties
*/
struct dax_device {
struct hlist_node list;
struct inode inode;
struct cdev cdev;
const char *host;
void *private;
unsigned long flags;
const struct dax_operations *ops;
};
static ssize_t write_cache_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct dax_device *dax_dev = dax_get_by_host(dev_name(dev));
ssize_t rc;
WARN_ON_ONCE(!dax_dev);
if (!dax_dev)
return -ENXIO;
rc = sprintf(buf, "%d\n", !!dax_write_cache_enabled(dax_dev));
put_dax(dax_dev);
return rc;
}
static ssize_t write_cache_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
bool write_cache;
int rc = strtobool(buf, &write_cache);
struct dax_device *dax_dev = dax_get_by_host(dev_name(dev));
WARN_ON_ONCE(!dax_dev);
if (!dax_dev)
return -ENXIO;
if (rc)
len = rc;
else
dax_write_cache(dax_dev, write_cache);
put_dax(dax_dev);
return len;
}
static DEVICE_ATTR_RW(write_cache);
static umode_t dax_visible(struct kobject *kobj, struct attribute *a, int n)
{
struct device *dev = container_of(kobj, typeof(*dev), kobj);
struct dax_device *dax_dev = dax_get_by_host(dev_name(dev));
WARN_ON_ONCE(!dax_dev);
if (!dax_dev)
return 0;
#ifndef CONFIG_ARCH_HAS_PMEM_API
if (a == &dev_attr_write_cache.attr)
return 0;
#endif
return a->mode;
}
static struct attribute *dax_attributes[] = {
&dev_attr_write_cache.attr,
NULL,
};
struct attribute_group dax_attribute_group = {
.name = "dax",
.attrs = dax_attributes,
.is_visible = dax_visible,
};
EXPORT_SYMBOL_GPL(dax_attribute_group);
/**
* dax_direct_access() - translate a device pgoff to an absolute pfn
* @dax_dev: a dax_device instance representing the logical memory range
* @pgoff: offset in pages from the start of the device to translate
* @nr_pages: number of consecutive pages caller can handle relative to @pfn
* @kaddr: output parameter that returns a virtual address mapping of pfn
* @pfn: output parameter that returns an absolute pfn translation of @pgoff
*
* Return: negative errno if an error occurs, otherwise the number of
* pages accessible at the device relative @pgoff.
*/
long dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, long nr_pages,
void **kaddr, pfn_t *pfn)
{
long avail;
if (!dax_dev)
return -EOPNOTSUPP;
if (!dax_alive(dax_dev))
return -ENXIO;
if (nr_pages < 0)
return nr_pages;
avail = dax_dev->ops->direct_access(dax_dev, pgoff, nr_pages,
kaddr, pfn);
if (!avail)
return -ERANGE;
return min(avail, nr_pages);
}
EXPORT_SYMBOL_GPL(dax_direct_access);
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,
int blocksize, sector_t start, sector_t len)
{
if (!dax_dev)
return false;
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
if (!dax_alive(dax_dev))
return false;
return dax_dev->ops->dax_supported(dax_dev, bdev, blocksize, start, len);
}
EXPORT_SYMBOL_GPL(dax_supported);
dax: Arrange for dax_supported check to span multiple devices Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-16 23:26:29 +03:00
size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
size_t bytes, struct iov_iter *i)
{
if (!dax_alive(dax_dev))
return 0;
return dax_dev->ops->copy_from_iter(dax_dev, pgoff, addr, bytes, i);
}
EXPORT_SYMBOL_GPL(dax_copy_from_iter);
size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
size_t bytes, struct iov_iter *i)
{
if (!dax_alive(dax_dev))
return 0;
return dax_dev->ops->copy_to_iter(dax_dev, pgoff, addr, bytes, i);
}
EXPORT_SYMBOL_GPL(dax_copy_to_iter);
int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
size_t nr_pages)
{
if (!dax_alive(dax_dev))
return -ENXIO;
/*
* There are no callers that want to zero more than one page as of now.
* Once users are there, this check can be removed after the
* device mapper code has been updated to split ranges across targets.
*/
if (nr_pages != 1)
return -EIO;
return dax_dev->ops->zero_page_range(dax_dev, pgoff, nr_pages);
}
EXPORT_SYMBOL_GPL(dax_zero_page_range);
#ifdef CONFIG_ARCH_HAS_PMEM_API
void arch_wb_cache_pmem(void *addr, size_t size);
void dax_flush(struct dax_device *dax_dev, void *addr, size_t size)
{
if (unlikely(!dax_write_cache_enabled(dax_dev)))
return;
arch_wb_cache_pmem(addr, size);
}
#else
void dax_flush(struct dax_device *dax_dev, void *addr, size_t size)
{
}
#endif
EXPORT_SYMBOL_GPL(dax_flush);
void dax_write_cache(struct dax_device *dax_dev, bool wc)
{
if (wc)
set_bit(DAXDEV_WRITE_CACHE, &dax_dev->flags);
else
clear_bit(DAXDEV_WRITE_CACHE, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(dax_write_cache);
bool dax_write_cache_enabled(struct dax_device *dax_dev)
{
return test_bit(DAXDEV_WRITE_CACHE, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(dax_write_cache_enabled);
bool __dax_synchronous(struct dax_device *dax_dev)
{
return test_bit(DAXDEV_SYNC, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(__dax_synchronous);
void __set_dax_synchronous(struct dax_device *dax_dev)
{
set_bit(DAXDEV_SYNC, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(__set_dax_synchronous);
bool dax_alive(struct dax_device *dax_dev)
{
lockdep_assert_held(&dax_srcu);
return test_bit(DAXDEV_ALIVE, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(dax_alive);
static int dax_host_hash(const char *host)
{
return hashlen_hash(hashlen_string("DAX", host)) % DAX_HASH_SIZE;
}
/*
* Note, rcu is not protecting the liveness of dax_dev, rcu is ensuring
* that any fault handlers or operations that might have seen
* dax_alive(), have completed. Any operations that start after
* synchronize_srcu() has run will abort upon seeing !dax_alive().
*/
void kill_dax(struct dax_device *dax_dev)
{
if (!dax_dev)
return;
clear_bit(DAXDEV_ALIVE, &dax_dev->flags);
synchronize_srcu(&dax_srcu);
spin_lock(&dax_host_lock);
hlist_del_init(&dax_dev->list);
spin_unlock(&dax_host_lock);
}
EXPORT_SYMBOL_GPL(kill_dax);
void run_dax(struct dax_device *dax_dev)
{
set_bit(DAXDEV_ALIVE, &dax_dev->flags);
}
EXPORT_SYMBOL_GPL(run_dax);
static struct inode *dax_alloc_inode(struct super_block *sb)
{
struct dax_device *dax_dev;
device-dax: fix 'dax' device filesystem inode destruction crash The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09 18:50:49 +03:00
struct inode *inode;
dax_dev = kmem_cache_alloc(dax_cache, GFP_KERNEL);
if (!dax_dev)
return NULL;
device-dax: fix 'dax' device filesystem inode destruction crash The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09 18:50:49 +03:00
inode = &dax_dev->inode;
inode->i_rdev = 0;
return inode;
}
static struct dax_device *to_dax_dev(struct inode *inode)
{
return container_of(inode, struct dax_device, inode);
}
static void dax_free_inode(struct inode *inode)
{
struct dax_device *dax_dev = to_dax_dev(inode);
kfree(dax_dev->host);
dax_dev->host = NULL;
device-dax: fix 'dax' device filesystem inode destruction crash The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09 18:50:49 +03:00
if (inode->i_rdev)
ida_simple_remove(&dax_minor_ida, MINOR(inode->i_rdev));
kmem_cache_free(dax_cache, dax_dev);
}
static void dax_destroy_inode(struct inode *inode)
{
struct dax_device *dax_dev = to_dax_dev(inode);
WARN_ONCE(test_bit(DAXDEV_ALIVE, &dax_dev->flags),
"kill_dax() must be called before final iput()\n");
}
static const struct super_operations dax_sops = {
.statfs = simple_statfs,
.alloc_inode = dax_alloc_inode,
.destroy_inode = dax_destroy_inode,
.free_inode = dax_free_inode,
.drop_inode = generic_delete_inode,
};
static int dax_init_fs_context(struct fs_context *fc)
{
struct pseudo_fs_context *ctx = init_pseudo(fc, DAXFS_MAGIC);
if (!ctx)
return -ENOMEM;
ctx->ops = &dax_sops;
return 0;
}
static struct file_system_type dax_fs_type = {
.name = "dax",
.init_fs_context = dax_init_fs_context,
.kill_sb = kill_anon_super,
};
static int dax_test(struct inode *inode, void *data)
{
dev_t devt = *(dev_t *) data;
return inode->i_rdev == devt;
}
static int dax_set(struct inode *inode, void *data)
{
dev_t devt = *(dev_t *) data;
inode->i_rdev = devt;
return 0;
}
static struct dax_device *dax_dev_get(dev_t devt)
{
struct dax_device *dax_dev;
struct inode *inode;
inode = iget5_locked(dax_superblock, hash_32(devt + DAXFS_MAGIC, 31),
dax_test, dax_set, &devt);
if (!inode)
return NULL;
dax_dev = to_dax_dev(inode);
if (inode->i_state & I_NEW) {
set_bit(DAXDEV_ALIVE, &dax_dev->flags);
inode->i_cdev = &dax_dev->cdev;
inode->i_mode = S_IFCHR;
inode->i_flags = S_DAX;
mapping_set_gfp_mask(&inode->i_data, GFP_USER);
unlock_new_inode(inode);
}
return dax_dev;
}
static void dax_add_host(struct dax_device *dax_dev, const char *host)
{
int hash;
/*
* Unconditionally init dax_dev since it's coming from a
* non-zeroed slab cache
*/
INIT_HLIST_NODE(&dax_dev->list);
dax_dev->host = host;
if (!host)
return;
hash = dax_host_hash(host);
spin_lock(&dax_host_lock);
hlist_add_head(&dax_dev->list, &dax_host_list[hash]);
spin_unlock(&dax_host_lock);
}
struct dax_device *alloc_dax(void *private, const char *__host,
const struct dax_operations *ops, unsigned long flags)
{
struct dax_device *dax_dev;
const char *host;
dev_t devt;
int minor;
if (ops && !ops->zero_page_range) {
pr_debug("%s: error: device does not provide dax"
" operation zero_page_range()\n",
__host ? __host : "Unknown");
return ERR_PTR(-EINVAL);
}
host = kstrdup(__host, GFP_KERNEL);
if (__host && !host)
return ERR_PTR(-ENOMEM);
minor = ida_simple_get(&dax_minor_ida, 0, MINORMASK+1, GFP_KERNEL);
if (minor < 0)
goto err_minor;
devt = MKDEV(MAJOR(dax_devt), minor);
dax_dev = dax_dev_get(devt);
if (!dax_dev)
goto err_dev;
dax_add_host(dax_dev, host);
dax_dev->ops = ops;
dax_dev->private = private;
if (flags & DAXDEV_F_SYNC)
set_dax_synchronous(dax_dev);
return dax_dev;
err_dev:
ida_simple_remove(&dax_minor_ida, minor);
err_minor:
kfree(host);
return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL_GPL(alloc_dax);
void put_dax(struct dax_device *dax_dev)
{
if (!dax_dev)
return;
iput(&dax_dev->inode);
}
EXPORT_SYMBOL_GPL(put_dax);
/**
* dax_get_by_host() - temporary lookup mechanism for filesystem-dax
* @host: alternate name for the device registered by a dax driver
*/
struct dax_device *dax_get_by_host(const char *host)
{
struct dax_device *dax_dev, *found = NULL;
int hash, id;
if (!host)
return NULL;
hash = dax_host_hash(host);
id = dax_read_lock();
spin_lock(&dax_host_lock);
hlist_for_each_entry(dax_dev, &dax_host_list[hash], list) {
if (!dax_alive(dax_dev)
|| strcmp(host, dax_dev->host) != 0)
continue;
if (igrab(&dax_dev->inode))
found = dax_dev;
break;
}
spin_unlock(&dax_host_lock);
dax_read_unlock(id);
return found;
}
EXPORT_SYMBOL_GPL(dax_get_by_host);
/**
* inode_dax: convert a public inode into its dax_dev
* @inode: An inode with i_cdev pointing to a dax_dev
*
* Note this is not equivalent to to_dax_dev() which is for private
* internal use where we know the inode filesystem type == dax_fs_type.
*/
struct dax_device *inode_dax(struct inode *inode)
{
struct cdev *cdev = inode->i_cdev;
return container_of(cdev, struct dax_device, cdev);
}
EXPORT_SYMBOL_GPL(inode_dax);
struct inode *dax_inode(struct dax_device *dax_dev)
{
return &dax_dev->inode;
}
EXPORT_SYMBOL_GPL(dax_inode);
void *dax_get_private(struct dax_device *dax_dev)
{
if (!test_bit(DAXDEV_ALIVE, &dax_dev->flags))
return NULL;
return dax_dev->private;
}
EXPORT_SYMBOL_GPL(dax_get_private);
static void init_once(void *_dax_dev)
{
struct dax_device *dax_dev = _dax_dev;
struct inode *inode = &dax_dev->inode;
device-dax: fix 'dax' device filesystem inode destruction crash The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09 18:50:49 +03:00
memset(dax_dev, 0, sizeof(*dax_dev));
inode_init_once(inode);
}
static int dax_fs_init(void)
{
int rc;
dax_cache = kmem_cache_create("dax_cache", sizeof(struct dax_device), 0,
(SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD|SLAB_ACCOUNT),
init_once);
if (!dax_cache)
return -ENOMEM;
dax_mnt = kern_mount(&dax_fs_type);
if (IS_ERR(dax_mnt)) {
rc = PTR_ERR(dax_mnt);
goto err_mount;
}
dax_superblock = dax_mnt->mnt_sb;
return 0;
err_mount:
kmem_cache_destroy(dax_cache);
return rc;
}
static void dax_fs_exit(void)
{
kern_unmount(dax_mnt);
kmem_cache_destroy(dax_cache);
}
static int __init dax_core_init(void)
{
int rc;
rc = dax_fs_init();
if (rc)
return rc;
rc = alloc_chrdev_region(&dax_devt, 0, MINORMASK+1, "dax");
if (rc)
goto err_chrdev;
rc = dax_bus_init();
if (rc)
goto err_bus;
return 0;
err_bus:
unregister_chrdev_region(dax_devt, MINORMASK+1);
err_chrdev:
dax_fs_exit();
return 0;
}
static void __exit dax_core_exit(void)
{
unregister_chrdev_region(dax_devt, MINORMASK+1);
ida_destroy(&dax_minor_ida);
dax_fs_exit();
}
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
subsys_initcall(dax_core_init);
module_exit(dax_core_exit);