linux/kernel/trace/trace_events.c

1390 lines
28 KiB
C
Raw Normal View History

/*
* event tracer
*
* Copyright (C) 2008 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
*
* - Added format output of fields of the trace point.
* This was based off of work by Tom Zanussi <tzanussi@gmail.com>.
*
*/
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
#include <linux/workqueue.h>
#include <linux/spinlock.h>
#include <linux/kthread.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
#include <linux/delay.h>
#include "trace_output.h"
#define TRACE_SYSTEM "TRACE_SYSTEM"
DEFINE_MUTEX(event_mutex);
LIST_HEAD(ftrace_events);
int trace_define_field(struct ftrace_event_call *call, char *type,
char *name, int offset, int size, int is_signed)
{
struct ftrace_event_field *field;
field = kzalloc(sizeof(*field), GFP_KERNEL);
if (!field)
goto err;
field->name = kstrdup(name, GFP_KERNEL);
if (!field->name)
goto err;
field->type = kstrdup(type, GFP_KERNEL);
if (!field->type)
goto err;
field->offset = offset;
field->size = size;
field->is_signed = is_signed;
list_add(&field->link, &call->fields);
return 0;
err:
if (field) {
kfree(field->name);
kfree(field->type);
}
kfree(field);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(trace_define_field);
#ifdef CONFIG_MODULES
static void trace_destroy_fields(struct ftrace_event_call *call)
{
struct ftrace_event_field *field, *next;
list_for_each_entry_safe(field, next, &call->fields, link) {
list_del(&field->link);
kfree(field->type);
kfree(field->name);
kfree(field);
}
}
#endif /* CONFIG_MODULES */
static void ftrace_event_enable_disable(struct ftrace_event_call *call,
int enable)
{
switch (enable) {
case 0:
if (call->enabled) {
call->enabled = 0;
ftrace: Add task_comm support for trace_event If we enable a trace event alone without any tracer running (such as function tracer, sched switch tracer, etc...) it can't output enough task command information. We need to use the tracing_{start/stop}_cmdline_record() helpers which are designed to keep track of cmdlines for any tasks that were scheduled during the tracing. Before this patch: # echo 1 > debugfs/tracing/events/sched/sched_switch/enable # cat debugfs/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-2289 [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120] <...>-2289 [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140] <idle>-0 [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115] <...>-5 [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... After this patch: # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | bash-2269 [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120] bash-2269 [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140] <idle>-0 [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115] events/0-5 [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... Changelog: v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in ENABLE_EVENT_TRACING v2->v3: v2 can solve problem that was caused by config EVENT_TRACING alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is selected by other config, compile fail happened again. This version solves it. [ Impact: fix incomplete output of event tracing ] Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-25 14:11:59 +04:00
tracing_stop_cmdline_record();
call->unregfunc();
}
break;
case 1:
tracing: new format for specialized trace points Impact: clean up and enhancement The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its ability to save data as well as to print the record out. Working with Ingo Molnar, we came up with a new format that is much more pleasing to the eye of C developers. This new macro is more C style than the old macro, and is more obvious to what it does. Here's the example. The only updated macro in this patch is the sched_switch trace point. The old method looked like this: TRACE_EVENT_FORMAT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_FMT("task %s:%d ==> %s:%d", prev->comm, prev->pid, next->comm, next->pid), TRACE_STRUCT( TRACE_FIELD(pid_t, prev_pid, prev->pid) TRACE_FIELD(int, prev_prio, prev->prio) TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN], next_comm, TP_CMD(memcpy(TRACE_ENTRY->next_comm, next->comm, TASK_COMM_LEN))) TRACE_FIELD(pid_t, next_pid, next->pid) TRACE_FIELD(int, next_prio, next->prio) ), TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d") ); The above method is hard to read and requires two format fields. The new method: /* * Tracepoint for task switches, performed by the scheduler: * * (NOTE: the 'rq' argument is not used by generic trace events, * but used by the latency tracer plugin. ) */ TRACE_EVENT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_STRUCT__entry( __array( char, prev_comm, TASK_COMM_LEN ) __field( pid_t, prev_pid ) __field( int, prev_prio ) __array( char, next_comm, TASK_COMM_LEN ) __field( pid_t, next_pid ) __field( int, next_prio ) ), TP_printk("task %s:%d [%d] ==> %s:%d [%d]", __entry->prev_comm, __entry->prev_pid, __entry->prev_prio, __entry->next_comm, __entry->next_pid, __entry->next_prio), TP_fast_assign( memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN); __entry->prev_pid = prev->pid; __entry->prev_prio = prev->prio; memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN); __entry->next_pid = next->pid; __entry->next_prio = next->prio; ) ); This macro is called TRACE_EVENT, it is broken up into 5 parts: TP_PROTO: the proto type of the trace point TP_ARGS: the arguments of the trace point TP_STRUCT_entry: the structure layout of the entry in the ring buffer TP_printk: the printk format TP_fast_assign: the method used to write the entry into the ring buffer The structure is the definition of how the event will be saved in the ring buffer. The printk is used by the internal tracing in case of an oops, and the kernel needs to print out the format of the record to the console. This the TP_printk gives a means to show the records in a human readable format. It is also used to print out the data from the trace file. The TP_fast_assign is executed directly. It is basically like a C function, where the __entry is the handle to the record. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 00:14:30 +03:00
if (!call->enabled) {
call->enabled = 1;
ftrace: Add task_comm support for trace_event If we enable a trace event alone without any tracer running (such as function tracer, sched switch tracer, etc...) it can't output enough task command information. We need to use the tracing_{start/stop}_cmdline_record() helpers which are designed to keep track of cmdlines for any tasks that were scheduled during the tracing. Before this patch: # echo 1 > debugfs/tracing/events/sched/sched_switch/enable # cat debugfs/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-2289 [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120] <...>-2289 [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120] <...>-2287 [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140] <idle>-0 [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115] <...>-5 [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... After this patch: # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | bash-2269 [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120] bash-2269 [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120] sshd-2267 [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140] <idle>-0 [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115] events/0-5 [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140] ... Changelog: v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in ENABLE_EVENT_TRACING v2->v3: v2 can solve problem that was caused by config EVENT_TRACING alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is selected by other config, compile fail happened again. This version solves it. [ Impact: fix incomplete output of event tracing ] Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-25 14:11:59 +04:00
tracing_start_cmdline_record();
call->regfunc();
}
break;
}
}
static void ftrace_clear_events(void)
{
struct ftrace_event_call *call;
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
ftrace_event_enable_disable(call, 0);
}
mutex_unlock(&event_mutex);
}
/*
* __ftrace_set_clr_event(NULL, NULL, NULL, set) will set/unset all events.
*/
static int __ftrace_set_clr_event(const char *match, const char *sub,
const char *event, int set)
{
struct ftrace_event_call *call;
int ret = -EINVAL;
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
if (!call->name || !call->regfunc)
continue;
if (match &&
strcmp(match, call->name) != 0 &&
strcmp(match, call->system) != 0)
continue;
if (sub && strcmp(sub, call->system) != 0)
continue;
if (event && strcmp(event, call->name) != 0)
continue;
ftrace_event_enable_disable(call, set);
ret = 0;
}
mutex_unlock(&event_mutex);
return ret;
}
static int ftrace_set_clr_event(char *buf, int set)
{
char *event = NULL, *sub = NULL, *match;
/*
* The buf format can be <subsystem>:<event-name>
* *:<event-name> means any event by that name.
* :<event-name> is the same.
*
* <subsystem>:* means all events in that subsystem
* <subsystem>: means the same.
*
* <name> (no ':') means all events in a subsystem with
* the name <name> or any event that matches <name>
*/
match = strsep(&buf, ":");
if (buf) {
sub = match;
event = buf;
match = NULL;
if (!strlen(sub) || strcmp(sub, "*") == 0)
sub = NULL;
if (!strlen(event) || strcmp(event, "*") == 0)
event = NULL;
}
return __ftrace_set_clr_event(match, sub, event, set);
}
/**
* trace_set_clr_event - enable or disable an event
* @system: system name to match (NULL for any system)
* @event: event name to match (NULL for all events, within system)
* @set: 1 to enable, 0 to disable
*
* This is a way for other parts of the kernel to enable or disable
* event recording.
*
* Returns 0 on success, -EINVAL if the parameters do not match any
* registered events.
*/
int trace_set_clr_event(const char *system, const char *event, int set)
{
return __ftrace_set_clr_event(NULL, system, event, set);
}
/* 128 should be much more than enough */
#define EVENT_BUF_SIZE 127
static ssize_t
ftrace_event_write(struct file *file, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
size_t read = 0;
int i, set = 1;
ssize_t ret;
char *buf;
char ch;
if (!cnt || cnt < 0)
return 0;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
ret = get_user(ch, ubuf++);
if (ret)
return ret;
read++;
cnt--;
/* skip white space */
while (cnt && isspace(ch)) {
ret = get_user(ch, ubuf++);
if (ret)
return ret;
read++;
cnt--;
}
/* Only white space found? */
if (isspace(ch)) {
file->f_pos += read;
ret = read;
return ret;
}
buf = kmalloc(EVENT_BUF_SIZE+1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (cnt > EVENT_BUF_SIZE)
cnt = EVENT_BUF_SIZE;
i = 0;
while (cnt && !isspace(ch)) {
if (!i && ch == '!')
set = 0;
else
buf[i++] = ch;
ret = get_user(ch, ubuf++);
if (ret)
goto out_free;
read++;
cnt--;
}
buf[i] = 0;
file->f_pos += read;
ret = ftrace_set_clr_event(buf, set);
if (ret)
goto out_free;
ret = read;
out_free:
kfree(buf);
return ret;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
struct list_head *list = m->private;
struct ftrace_event_call *call;
(*pos)++;
for (;;) {
if (list == &ftrace_events)
return NULL;
call = list_entry(list, struct ftrace_event_call, list);
/*
* The ftrace subsystem is for showing formats only.
* They can not be enabled or disabled via the event files.
*/
if (call->regfunc)
break;
list = list->next;
}
m->private = list->next;
return call;
}
static void *t_start(struct seq_file *m, loff_t *pos)
{
mutex_lock(&event_mutex);
if (*pos == 0)
m->private = ftrace_events.next;
return t_next(m, NULL, pos);
}
static void *
s_next(struct seq_file *m, void *v, loff_t *pos)
{
struct list_head *list = m->private;
struct ftrace_event_call *call;
(*pos)++;
retry:
if (list == &ftrace_events)
return NULL;
call = list_entry(list, struct ftrace_event_call, list);
if (!call->enabled) {
list = list->next;
goto retry;
}
m->private = list->next;
return call;
}
static void *s_start(struct seq_file *m, loff_t *pos)
{
mutex_lock(&event_mutex);
if (*pos == 0)
m->private = ftrace_events.next;
return s_next(m, NULL, pos);
}
static int t_show(struct seq_file *m, void *v)
{
struct ftrace_event_call *call = v;
if (strcmp(call->system, TRACE_SYSTEM) != 0)
seq_printf(m, "%s:", call->system);
seq_printf(m, "%s\n", call->name);
return 0;
}
static void t_stop(struct seq_file *m, void *p)
{
mutex_unlock(&event_mutex);
}
static int
ftrace_event_seq_open(struct inode *inode, struct file *file)
{
const struct seq_operations *seq_ops;
if ((file->f_mode & FMODE_WRITE) &&
!(file->f_flags & O_APPEND))
ftrace_clear_events();
seq_ops = inode->i_private;
return seq_open(file, seq_ops);
}
static ssize_t
event_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
char *buf;
tracing: new format for specialized trace points Impact: clean up and enhancement The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its ability to save data as well as to print the record out. Working with Ingo Molnar, we came up with a new format that is much more pleasing to the eye of C developers. This new macro is more C style than the old macro, and is more obvious to what it does. Here's the example. The only updated macro in this patch is the sched_switch trace point. The old method looked like this: TRACE_EVENT_FORMAT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_FMT("task %s:%d ==> %s:%d", prev->comm, prev->pid, next->comm, next->pid), TRACE_STRUCT( TRACE_FIELD(pid_t, prev_pid, prev->pid) TRACE_FIELD(int, prev_prio, prev->prio) TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN], next_comm, TP_CMD(memcpy(TRACE_ENTRY->next_comm, next->comm, TASK_COMM_LEN))) TRACE_FIELD(pid_t, next_pid, next->pid) TRACE_FIELD(int, next_prio, next->prio) ), TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d") ); The above method is hard to read and requires two format fields. The new method: /* * Tracepoint for task switches, performed by the scheduler: * * (NOTE: the 'rq' argument is not used by generic trace events, * but used by the latency tracer plugin. ) */ TRACE_EVENT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_STRUCT__entry( __array( char, prev_comm, TASK_COMM_LEN ) __field( pid_t, prev_pid ) __field( int, prev_prio ) __array( char, next_comm, TASK_COMM_LEN ) __field( pid_t, next_pid ) __field( int, next_prio ) ), TP_printk("task %s:%d [%d] ==> %s:%d [%d]", __entry->prev_comm, __entry->prev_pid, __entry->prev_prio, __entry->next_comm, __entry->next_pid, __entry->next_prio), TP_fast_assign( memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN); __entry->prev_pid = prev->pid; __entry->prev_prio = prev->prio; memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN); __entry->next_pid = next->pid; __entry->next_prio = next->prio; ) ); This macro is called TRACE_EVENT, it is broken up into 5 parts: TP_PROTO: the proto type of the trace point TP_ARGS: the arguments of the trace point TP_STRUCT_entry: the structure layout of the entry in the ring buffer TP_printk: the printk format TP_fast_assign: the method used to write the entry into the ring buffer The structure is the definition of how the event will be saved in the ring buffer. The printk is used by the internal tracing in case of an oops, and the kernel needs to print out the format of the record to the console. This the TP_printk gives a means to show the records in a human readable format. It is also used to print out the data from the trace file. The TP_fast_assign is executed directly. It is basically like a C function, where the __entry is the handle to the record. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 00:14:30 +03:00
if (call->enabled)
buf = "1\n";
else
buf = "0\n";
return simple_read_from_buffer(ubuf, cnt, ppos, buf, 2);
}
static ssize_t
event_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
char buf[64];
unsigned long val;
int ret;
if (cnt >= sizeof(buf))
return -EINVAL;
if (copy_from_user(&buf, ubuf, cnt))
return -EFAULT;
buf[cnt] = 0;
ret = strict_strtoul(buf, 10, &val);
if (ret < 0)
return ret;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
switch (val) {
case 0:
case 1:
mutex_lock(&event_mutex);
ftrace_event_enable_disable(call, val);
mutex_unlock(&event_mutex);
break;
default:
return -EINVAL;
}
*ppos += cnt;
return cnt;
}
static ssize_t
system_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
const char set_to_char[4] = { '?', '0', '1', 'X' };
const char *system = filp->private_data;
struct ftrace_event_call *call;
char buf[2];
int set = 0;
int ret;
mutex_lock(&event_mutex);
list_for_each_entry(call, &ftrace_events, list) {
if (!call->name || !call->regfunc)
continue;
if (system && strcmp(call->system, system) != 0)
continue;
/*
* We need to find out if all the events are set
* or if all events or cleared, or if we have
* a mixture.
*/
set |= (1 << !!call->enabled);
/*
* If we have a mixture, no need to look further.
*/
if (set == 3)
break;
}
mutex_unlock(&event_mutex);
buf[0] = set_to_char[set];
buf[1] = '\n';
ret = simple_read_from_buffer(ubuf, cnt, ppos, buf, 2);
return ret;
}
static ssize_t
system_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
const char *system = filp->private_data;
unsigned long val;
char buf[64];
ssize_t ret;
if (cnt >= sizeof(buf))
return -EINVAL;
if (copy_from_user(&buf, ubuf, cnt))
return -EFAULT;
buf[cnt] = 0;
ret = strict_strtoul(buf, 10, &val);
if (ret < 0)
return ret;
ret = tracing_update_buffers();
if (ret < 0)
return ret;
if (val != 0 && val != 1)
return -EINVAL;
ret = __ftrace_set_clr_event(NULL, system, NULL, val);
if (ret)
goto out;
ret = cnt;
out:
*ppos += cnt;
return ret;
}
extern char *__bad_type_size(void);
#undef FIELD
#define FIELD(type, name) \
sizeof(type) != sizeof(field.name) ? __bad_type_size() : \
#type, "common_" #name, offsetof(typeof(field), name), \
sizeof(field.name)
static int trace_write_header(struct trace_seq *s)
{
struct trace_entry field;
/* struct trace_entry */
return trace_seq_printf(s,
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\n",
FIELD(unsigned short, type),
FIELD(unsigned char, flags),
FIELD(unsigned char, preempt_count),
FIELD(int, pid),
FIELD(int, tgid));
}
tracing: new format for specialized trace points Impact: clean up and enhancement The TRACE_EVENT_FORMAT macro looks quite ugly and is limited in its ability to save data as well as to print the record out. Working with Ingo Molnar, we came up with a new format that is much more pleasing to the eye of C developers. This new macro is more C style than the old macro, and is more obvious to what it does. Here's the example. The only updated macro in this patch is the sched_switch trace point. The old method looked like this: TRACE_EVENT_FORMAT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_FMT("task %s:%d ==> %s:%d", prev->comm, prev->pid, next->comm, next->pid), TRACE_STRUCT( TRACE_FIELD(pid_t, prev_pid, prev->pid) TRACE_FIELD(int, prev_prio, prev->prio) TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN], next_comm, TP_CMD(memcpy(TRACE_ENTRY->next_comm, next->comm, TASK_COMM_LEN))) TRACE_FIELD(pid_t, next_pid, next->pid) TRACE_FIELD(int, next_prio, next->prio) ), TP_RAW_FMT("prev %d:%d ==> next %s:%d:%d") ); The above method is hard to read and requires two format fields. The new method: /* * Tracepoint for task switches, performed by the scheduler: * * (NOTE: the 'rq' argument is not used by generic trace events, * but used by the latency tracer plugin. ) */ TRACE_EVENT(sched_switch, TP_PROTO(struct rq *rq, struct task_struct *prev, struct task_struct *next), TP_ARGS(rq, prev, next), TP_STRUCT__entry( __array( char, prev_comm, TASK_COMM_LEN ) __field( pid_t, prev_pid ) __field( int, prev_prio ) __array( char, next_comm, TASK_COMM_LEN ) __field( pid_t, next_pid ) __field( int, next_prio ) ), TP_printk("task %s:%d [%d] ==> %s:%d [%d]", __entry->prev_comm, __entry->prev_pid, __entry->prev_prio, __entry->next_comm, __entry->next_pid, __entry->next_prio), TP_fast_assign( memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN); __entry->prev_pid = prev->pid; __entry->prev_prio = prev->prio; memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN); __entry->next_pid = next->pid; __entry->next_prio = next->prio; ) ); This macro is called TRACE_EVENT, it is broken up into 5 parts: TP_PROTO: the proto type of the trace point TP_ARGS: the arguments of the trace point TP_STRUCT_entry: the structure layout of the entry in the ring buffer TP_printk: the printk format TP_fast_assign: the method used to write the entry into the ring buffer The structure is the definition of how the event will be saved in the ring buffer. The printk is used by the internal tracing in case of an oops, and the kernel needs to print out the format of the record to the console. This the TP_printk gives a means to show the records in a human readable format. It is also used to print out the data from the trace file. The TP_fast_assign is executed directly. It is basically like a C function, where the __entry is the handle to the record. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-10 00:14:30 +03:00
static ssize_t
event_format_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
struct trace_seq *s;
char *buf;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
/* If any of the first writes fail, so will the show_format. */
trace_seq_printf(s, "name: %s\n", call->name);
trace_seq_printf(s, "ID: %d\n", call->id);
trace_seq_printf(s, "format:\n");
trace_write_header(s);
r = call->show_format(s);
if (!r) {
/*
* ug! The format output is bigger than a PAGE!!
*/
buf = "FORMAT TOO BIG\n";
r = simple_read_from_buffer(ubuf, cnt, ppos,
buf, strlen(buf));
goto out;
}
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, s->len);
out:
kfree(s);
return r;
}
static ssize_t
event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
trace_seq_printf(s, "%d\n", call->id);
r = simple_read_from_buffer(ubuf, cnt, ppos,
s->buffer, s->len);
kfree(s);
return r;
}
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
static ssize_t
event_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
print_event_filter(call, s);
r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
kfree(s);
return r;
}
static ssize_t
event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct ftrace_event_call *call = filp->private_data;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
char *buf;
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
int err;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
if (cnt >= PAGE_SIZE)
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
return -EINVAL;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
buf = (char *)__get_free_page(GFP_TEMPORARY);
if (!buf)
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
return -ENOMEM;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
if (copy_from_user(buf, ubuf, cnt)) {
free_page((unsigned long) buf);
return -EFAULT;
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
}
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
buf[cnt] = '\0';
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
err = apply_event_filter(call, buf);
free_page((unsigned long) buf);
if (err < 0)
return err;
tracing/filters: allow on-the-fly filter switching This patch allows event filters to be safely removed or switched on-the-fly while avoiding the use of rcu or the suspension of tracing of previous versions. It does it by adding a new filter_pred_none() predicate function which does nothing and by never deallocating either the predicates or any of the filter_pred members used in matching; the predicate lists are allocated and initialized during ftrace_event_calls initialization. Whenever a filter is removed or replaced, the filter_pred_* functions currently in use by the affected ftrace_event_call are immediately switched over to to the filter_pred_none() function, while the rest of the filter_pred members are left intact, allowing any currently executing filter_pred_* functions to finish up, using the values they're currently using. In the case of filter replacement, the new predicate values are copied into the old predicates after the above step, and the filter_pred_none() functions are replaced by the filter_pred_* functions for the new filter. In this case, it is possible though very unlikely that a previous filter_pred_* is still running even after the filter_pred_none() switch and the switch to the new filter_pred_*. In that case, however, because nothing has been deallocated in the filter_pred, the worst that can happen is that the old filter_pred_* function sees the new values and as a result produces either a false positive or a false negative, depending on the values it finds. So one downside to this method is that rarely, it can produce a bad match during the filter switch, but it should be possible to live with that, IMHO. The other downside is that at least in this patch the predicate lists are always pre-allocated, taking up memory from the start. They could probably be allocated on first-use, and de-allocated when tracing is completely stopped - if this patch makes sense, I could create another one to do that later on. Oh, and it also places a restriction on the size of __arrays in events, currently set to 128, since they can't be larger than the now embedded str_val arrays in the filter_pred struct. Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: paulmck@linux.vnet.ibm.com LKML-Reference: <1239610670.6660.49.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-13 12:17:50 +04:00
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
*ppos += cnt;
return cnt;
}
static ssize_t
subsystem_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct event_subsystem *system = filp->private_data;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
print_subsystem_event_filter(system, s);
r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
kfree(s);
return r;
}
static ssize_t
subsystem_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
struct event_subsystem *system = filp->private_data;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
char *buf;
int err;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
if (cnt >= PAGE_SIZE)
return -EINVAL;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
buf = (char *)__get_free_page(GFP_TEMPORARY);
if (!buf)
return -ENOMEM;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
if (copy_from_user(buf, ubuf, cnt)) {
free_page((unsigned long) buf);
return -EFAULT;
}
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
buf[cnt] = '\0';
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
err = apply_subsystem_event_filter(system, buf);
free_page((unsigned long) buf);
if (err < 0)
return err;
*ppos += cnt;
return cnt;
}
static ssize_t
show_header(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
int (*func)(struct trace_seq *s) = filp->private_data;
struct trace_seq *s;
int r;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
trace_seq_init(s);
func(s);
r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
kfree(s);
return r;
}
static const struct seq_operations show_event_seq_ops = {
.start = t_start,
.next = t_next,
.show = t_show,
.stop = t_stop,
};
static const struct seq_operations show_set_event_seq_ops = {
.start = s_start,
.next = s_next,
.show = t_show,
.stop = t_stop,
};
static const struct file_operations ftrace_avail_fops = {
.open = ftrace_event_seq_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
static const struct file_operations ftrace_set_event_fops = {
.open = ftrace_event_seq_open,
.read = seq_read,
.write = ftrace_event_write,
.llseek = seq_lseek,
.release = seq_release,
};
static const struct file_operations ftrace_enable_fops = {
.open = tracing_open_generic,
.read = event_enable_read,
.write = event_enable_write,
};
static const struct file_operations ftrace_event_format_fops = {
.open = tracing_open_generic,
.read = event_format_read,
};
static const struct file_operations ftrace_event_id_fops = {
.open = tracing_open_generic,
.read = event_id_read,
};
tracing: add per-event filtering This patch adds per-event filtering to the event tracing subsystem. It adds a 'filter' debugfs file to each event directory. This file can be written to to set filters; reading from it will display the current set of filters set for that event. Basically, any field listed in the 'format' file for an event can be filtered on (including strings, but not yet other array types) using either matching ('==') or non-matching ('!=') 'predicates'. A 'predicate' can be either a single expression: # echo pid != 0 > filter # cat filter pid != 0 or a compound expression of up to 8 sub-expressions combined using '&&' or '||': # echo comm == Xorg > filter # echo "&& sig != 29" > filter # cat filter comm == Xorg && sig != 29 Only events having field values matching an expression will be available in the trace output; non-matching events are discarded. Note that a compound expression is built up by echoing each sub-expression separately - it's not the most efficient way to do things, but it keeps the parser simple and assumes that compound expressions will be relatively uncommon. In any case, a subsequent patch introducing a way to set filters for entire subsystems should mitigate any need to do this for lots of events. Setting a filter without an '&&' or '||' clears the previous filter completely and sets the filter to the new expression: # cat filter comm == Xorg && sig != 29 # echo comm != Xorg # cat filter comm != Xorg To clear a filter, echo 0 to the filter file: # echo 0 > filter # cat filter none The limit of 8 predicates for a compound expression is arbitrary - for efficiency, it's implemented as an array of pointers to predicates, and 8 seemed more than enough for any filter... Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1237710665.7703.48.camel@charm-linux> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:31:04 +03:00
static const struct file_operations ftrace_event_filter_fops = {
.open = tracing_open_generic,
.read = event_filter_read,
.write = event_filter_write,
};
static const struct file_operations ftrace_subsystem_filter_fops = {
.open = tracing_open_generic,
.read = subsystem_filter_read,
.write = subsystem_filter_write,
};
static const struct file_operations ftrace_system_enable_fops = {
.open = tracing_open_generic,
.read = system_enable_read,
.write = system_enable_write,
};
static const struct file_operations ftrace_show_header_fops = {
.open = tracing_open_generic,
.read = show_header,
};
static struct dentry *event_trace_events_dir(void)
{
static struct dentry *d_tracer;
static struct dentry *d_events;
if (d_events)
return d_events;
d_tracer = tracing_init_dentry();
if (!d_tracer)
return NULL;
d_events = debugfs_create_dir("events", d_tracer);
if (!d_events)
pr_warning("Could not create debugfs "
"'events' directory\n");
return d_events;
}
static LIST_HEAD(event_subsystems);
static struct dentry *
event_subsystem_dir(const char *name, struct dentry *d_events)
{
struct event_subsystem *system;
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 09:48:49 +04:00
struct dentry *entry;
/* First see if we did not already create this dir */
list_for_each_entry(system, &event_subsystems, list) {
if (strcmp(system->name, name) == 0)
return system->entry;
}
/* need to create new entry */
system = kmalloc(sizeof(*system), GFP_KERNEL);
if (!system) {
pr_warning("No memory to create event subsystem %s\n",
name);
return d_events;
}
system->entry = debugfs_create_dir(name, d_events);
if (!system->entry) {
pr_warning("Could not create event subsystem %s\n",
name);
kfree(system);
return d_events;
}
system->name = kstrdup(name, GFP_KERNEL);
if (!system->name) {
debugfs_remove(system->entry);
kfree(system);
return d_events;
}
list_add(&system->list, &event_subsystems);
system->filter = NULL;
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
system->filter = kzalloc(sizeof(struct event_filter), GFP_KERNEL);
if (!system->filter) {
pr_warning("Could not allocate filter for subsystem "
"'%s'\n", name);
return system->entry;
}
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 09:48:49 +04:00
entry = debugfs_create_file("filter", 0644, system->entry, system,
&ftrace_subsystem_filter_fops);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
if (!entry) {
kfree(system->filter);
system->filter = NULL;
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 09:48:49 +04:00
pr_warning("Could not create debugfs "
"'%s/filter' entry\n", name);
tracing/filters: a better event parser Replace the current event parser hack with a better one. Filters are no longer specified predicate by predicate, but all at once and can use parens and any of the following operators: numeric fields: ==, !=, <, <=, >, >= string fields: ==, != predicates can be combined with the logical operators: &&, || examples: "common_preempt_count > 4" > filter "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter If there was an error, the erroneous string along with an error message can be seen by looking at the filter e.g.: ((sig >= 10 && sig < 15) || dsig == 17) && comm != bash ^ parse_error: Field not found Currently the caret for an error always appears at the beginning of the filter; a real position should be used, but the error message should be useful even without it. To clear a filter, '0' can be written to the filter file. Filters can also be set or cleared for a complete subsystem by writing the same filter as would be written to an individual event to the filter file at the root of the subsytem. Note however, that if any event in the subsystem lacks a field specified in the filter being set, the set will fail and all filters in the subsytem are automatically cleared. This change from the previous version was made because using only the fields that happen to exist for a given event would most likely result in a meaningless filter. Because the logical operators are now implemented as predicates, the maximum number of predicates in a filter was increased from 8 to 16. [ Impact: add new, extended trace-filter implementation ] Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: fweisbec@gmail.com Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <1240905899.6416.121.camel@tropicana> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:04:59 +04:00
}
tracing/filters: add run-time field descriptions to TRACE_EVENT_FORMAT events This patch adds run-time field descriptions to all the event formats exported using TRACE_EVENT_FORMAT. It also hooks up all the tracers that use them (i.e. the tracers in the 'ftrace subsystem') so they can also have their output filtered by the event-filtering mechanism. When I was testing this, there were a couple of things that fooled me into thinking the filters weren't working, when actually they were - I'll mention them here so others don't make the same mistakes (and file bug reports. ;-) One is that some of the tracers trace multiple events e.g. the sched_switch tracer uses the context_switch and wakeup events, and if you don't set filters on all of the traced events, the unfiltered output from the events without filters on them can make it look like the filtering as a whole isn't working properly, when actually it is doing what it was asked to do - it just wasn't asked to do the right thing. The other is that for the really high-volume tracers e.g. the function tracer, the volume of filtered events can be so high that it pushes the unfiltered events out of the ring buffer before they can be read so e.g. cat'ing the trace file repeatedly shows either no output, or once in awhile some output but that isn't there the next time you read the trace, which isn't what you normally expect when reading the trace file. If you read from the trace_pipe file though, you can catch them before they disappear. Changes from v1: As suggested by Frederic Weisbecker: - get rid of externs in functions - added unlikely() to filter_check_discard() Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-31 09:48:49 +04:00
entry = trace_create_file("enable", 0644, system->entry,
(void *)system->name,
&ftrace_system_enable_fops);
return system->entry;
}
static int
event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
const struct file_operations *id,
const struct file_operations *enable,
const struct file_operations *filter,
const struct file_operations *format)
{
struct dentry *entry;
int ret;
/*
* If the trace point header did not define TRACE_SYSTEM
* then the system would be called "TRACE_SYSTEM".
*/
if (strcmp(call->system, TRACE_SYSTEM) != 0)
d_events = event_subsystem_dir(call->system, d_events);
if (call->raw_init) {
ret = call->raw_init();
if (ret < 0) {
pr_warning("Could not initialize trace point"
" events/%s\n", call->name);
return ret;
}
}
call->dir = debugfs_create_dir(call->name, d_events);
if (!call->dir) {
pr_warning("Could not create debugfs "
"'%s' directory\n", call->name);
return -1;
}
if (call->regfunc)
entry = trace_create_file("enable", 0644, call->dir, call,
enable);
if (call->id)
entry = trace_create_file("id", 0444, call->dir, call,
id);
if (call->define_fields) {
ret = call->define_fields();
if (ret < 0) {
pr_warning("Could not initialize trace point"
" events/%s\n", call->name);
return ret;
}
entry = trace_create_file("filter", 0644, call->dir, call,
filter);
}
/* A trace may not want to export its format */
if (!call->show_format)
return 0;
entry = trace_create_file("format", 0444, call->dir, call,
format);
return 0;
}
#define for_each_event(event, start, end) \
for (event = start; \
(unsigned long)event < (unsigned long)end; \
event++)
#ifdef CONFIG_MODULES
static LIST_HEAD(ftrace_module_file_list);
/*
* Modules must own their file_operations to keep up with
* reference counting.
*/
struct ftrace_module_file_ops {
struct list_head list;
struct module *mod;
struct file_operations id;
struct file_operations enable;
struct file_operations format;
struct file_operations filter;
};
static struct ftrace_module_file_ops *
trace_create_file_ops(struct module *mod)
{
struct ftrace_module_file_ops *file_ops;
/*
* This is a bit of a PITA. To allow for correct reference
* counting, modules must "own" their file_operations.
* To do this, we allocate the file operations that will be
* used in the event directory.
*/
file_ops = kmalloc(sizeof(*file_ops), GFP_KERNEL);
if (!file_ops)
return NULL;
file_ops->mod = mod;
file_ops->id = ftrace_event_id_fops;
file_ops->id.owner = mod;
file_ops->enable = ftrace_enable_fops;
file_ops->enable.owner = mod;
file_ops->filter = ftrace_event_filter_fops;
file_ops->filter.owner = mod;
file_ops->format = ftrace_event_format_fops;
file_ops->format.owner = mod;
list_add(&file_ops->list, &ftrace_module_file_list);
return file_ops;
}
static void trace_module_add_events(struct module *mod)
{
struct ftrace_module_file_ops *file_ops = NULL;
struct ftrace_event_call *call, *start, *end;
struct dentry *d_events;
start = mod->trace_events;
end = mod->trace_events + mod->num_trace_events;
if (start == end)
return;
d_events = event_trace_events_dir();
if (!d_events)
return;
for_each_event(call, start, end) {
/* The linker may leave blanks */
if (!call->name)
continue;
/*
* This module has events, create file ops for this module
* if not already done.
*/
if (!file_ops) {
file_ops = trace_create_file_ops(mod);
if (!file_ops)
return;
}
call->mod = mod;
list_add(&call->list, &ftrace_events);
event_create_dir(call, d_events,
&file_ops->id, &file_ops->enable,
&file_ops->filter, &file_ops->format);
}
}
static void trace_module_remove_events(struct module *mod)
{
struct ftrace_module_file_ops *file_ops;
struct ftrace_event_call *call, *p;
bool found = false;
down_write(&trace_event_mutex);
list_for_each_entry_safe(call, p, &ftrace_events, list) {
if (call->mod == mod) {
found = true;
ftrace_event_enable_disable(call, 0);
if (call->event)
__unregister_ftrace_event(call->event);
debugfs_remove_recursive(call->dir);
list_del(&call->list);
trace_destroy_fields(call);
destroy_preds(call);
}
}
/* Now free the file_operations */
list_for_each_entry(file_ops, &ftrace_module_file_list, list) {
if (file_ops->mod == mod)
break;
}
if (&file_ops->list != &ftrace_module_file_list) {
list_del(&file_ops->list);
kfree(file_ops);
}
/*
* It is safest to reset the ring buffer if the module being unloaded
* registered any events.
*/
if (found)
tracing_reset_current_online_cpus();
up_write(&trace_event_mutex);
}
static int trace_module_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct module *mod = data;
mutex_lock(&event_mutex);
switch (val) {
case MODULE_STATE_COMING:
trace_module_add_events(mod);
break;
case MODULE_STATE_GOING:
trace_module_remove_events(mod);
break;
}
mutex_unlock(&event_mutex);
return 0;
}
#else
static int trace_module_notify(struct notifier_block *self,
unsigned long val, void *data)
{
return 0;
}
#endif /* CONFIG_MODULES */
struct notifier_block trace_module_nb = {
.notifier_call = trace_module_notify,
.priority = 0,
};
extern struct ftrace_event_call __start_ftrace_events[];
extern struct ftrace_event_call __stop_ftrace_events[];
static __init int event_trace_init(void)
{
struct ftrace_event_call *call;
struct dentry *d_tracer;
struct dentry *entry;
struct dentry *d_events;
int ret;
d_tracer = tracing_init_dentry();
if (!d_tracer)
return 0;
entry = debugfs_create_file("available_events", 0444, d_tracer,
(void *)&show_event_seq_ops,
&ftrace_avail_fops);
if (!entry)
pr_warning("Could not create debugfs "
"'available_events' entry\n");
entry = debugfs_create_file("set_event", 0644, d_tracer,
(void *)&show_set_event_seq_ops,
&ftrace_set_event_fops);
if (!entry)
pr_warning("Could not create debugfs "
"'set_event' entry\n");
d_events = event_trace_events_dir();
if (!d_events)
return 0;
/* ring buffer internal formats */
trace_create_file("header_page", 0444, d_events,
ring_buffer_print_page_header,
&ftrace_show_header_fops);
trace_create_file("header_event", 0444, d_events,
ring_buffer_print_entry_header,
&ftrace_show_header_fops);
trace_create_file("enable", 0644, d_events,
NULL, &ftrace_system_enable_fops);
for_each_event(call, __start_ftrace_events, __stop_ftrace_events) {
/* The linker may leave blanks */
if (!call->name)
continue;
list_add(&call->list, &ftrace_events);
event_create_dir(call, d_events, &ftrace_event_id_fops,
&ftrace_enable_fops, &ftrace_event_filter_fops,
&ftrace_event_format_fops);
}
ret = register_module_notifier(&trace_module_nb);
if (ret)
pr_warning("Failed to register trace events module notifier\n");
return 0;
}
fs_initcall(event_trace_init);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
#ifdef CONFIG_FTRACE_STARTUP_TEST
static DEFINE_SPINLOCK(test_spinlock);
static DEFINE_SPINLOCK(test_spinlock_irq);
static DEFINE_MUTEX(test_mutex);
static __init void test_work(struct work_struct *dummy)
{
spin_lock(&test_spinlock);
spin_lock_irq(&test_spinlock_irq);
udelay(1);
spin_unlock_irq(&test_spinlock_irq);
spin_unlock(&test_spinlock);
mutex_lock(&test_mutex);
msleep(1);
mutex_unlock(&test_mutex);
}
static __init int event_test_thread(void *unused)
{
void *test_malloc;
test_malloc = kmalloc(1234, GFP_KERNEL);
if (!test_malloc)
pr_info("failed to kmalloc\n");
schedule_on_each_cpu(test_work);
kfree(test_malloc);
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop())
schedule();
return 0;
}
/*
* Do various things that may trigger events.
*/
static __init void event_test_stuff(void)
{
struct task_struct *test_thread;
test_thread = kthread_run(event_test_thread, NULL, "test-events");
msleep(1);
kthread_stop(test_thread);
}
/*
* For every trace event defined, we will test each trace point separately,
* and then by groups, and finally all trace points.
*/
static __init void event_trace_self_tests(void)
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
{
struct ftrace_event_call *call;
struct event_subsystem *system;
int ret;
pr_info("Running tests on trace events:\n");
list_for_each_entry(call, &ftrace_events, list) {
/* Only test those that have a regfunc */
if (!call->regfunc)
continue;
pr_info("Testing event %s: ", call->name);
/*
* If an event is already enabled, someone is using
* it and the self test should not be on.
*/
if (call->enabled) {
pr_warning("Enabled event during self test!\n");
WARN_ON_ONCE(1);
continue;
}
ftrace_event_enable_disable(call, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
event_test_stuff();
ftrace_event_enable_disable(call, 0);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
pr_cont("OK\n");
}
/* Now test at the sub system level */
pr_info("Running tests on trace event systems:\n");
list_for_each_entry(system, &event_subsystems, list) {
/* the ftrace system is special, skip it */
if (strcmp(system->name, "ftrace") == 0)
continue;
pr_info("Testing event system %s: ", system->name);
ret = __ftrace_set_clr_event(NULL, system->name, NULL, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
if (WARN_ON_ONCE(ret)) {
pr_warning("error enabling system %s\n",
system->name);
continue;
}
event_test_stuff();
ret = __ftrace_set_clr_event(NULL, system->name, NULL, 0);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
if (WARN_ON_ONCE(ret))
pr_warning("error disabling system %s\n",
system->name);
pr_cont("OK\n");
}
/* Test with all events enabled */
pr_info("Running tests on all trace events:\n");
pr_info("Testing all events: ");
ret = __ftrace_set_clr_event(NULL, NULL, NULL, 1);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
if (WARN_ON_ONCE(ret)) {
pr_warning("error enabling all events\n");
return;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
}
event_test_stuff();
/* reset sysname */
ret = __ftrace_set_clr_event(NULL, NULL, NULL, 0);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
if (WARN_ON_ONCE(ret)) {
pr_warning("error disabling all events\n");
return;
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
}
pr_cont("OK\n");
}
#ifdef CONFIG_FUNCTION_TRACER
static DEFINE_PER_CPU(atomic_t, test_event_disable);
static void
function_test_events_call(unsigned long ip, unsigned long parent_ip)
{
struct ring_buffer_event *event;
struct ftrace_entry *entry;
unsigned long flags;
long disabled;
int resched;
int cpu;
int pc;
pc = preempt_count();
resched = ftrace_preempt_disable();
cpu = raw_smp_processor_id();
disabled = atomic_inc_return(&per_cpu(test_event_disable, cpu));
if (disabled != 1)
goto out;
local_save_flags(flags);
event = trace_current_buffer_lock_reserve(TRACE_FN, sizeof(*entry),
flags, pc);
if (!event)
goto out;
entry = ring_buffer_event_data(event);
entry->ip = ip;
entry->parent_ip = parent_ip;
trace_nowake_buffer_unlock_commit(event, flags, pc);
out:
atomic_dec(&per_cpu(test_event_disable, cpu));
ftrace_preempt_enable(resched);
}
static struct ftrace_ops trace_ops __initdata =
{
.func = function_test_events_call,
};
static __init void event_trace_self_test_with_function(void)
{
register_ftrace_function(&trace_ops);
pr_info("Running tests again, along with the function tracer\n");
event_trace_self_tests();
unregister_ftrace_function(&trace_ops);
}
#else
static __init void event_trace_self_test_with_function(void)
{
}
#endif
static __init int event_trace_self_tests_init(void)
{
event_trace_self_tests();
event_trace_self_test_with_function();
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
return 0;
}
late_initcall(event_trace_self_tests_init);
tracing/events: add startup tests for events As events start to become popular, and the new way to add tracing infrastructure into ftrace, it is important to catch any problems that might happen with a mistake in the TRACE_EVENT macro. This patch introduces a startup self test on the registered trace events. Note, it can only do a generic test, any type of testing that needs more involement is needed to be implemented by the tracepoint creators. The test goes down one by one enabling a trace point and running some random tasks (random in the sense that I just made them up). Those tasks are creating threads, grabbing mutexes and spinlocks and using workqueues. After testing each event individually, it does the same test after enabling each system of trace points. Like sched, irq, lockdep. Then finally it enables all tracepoints and performs the tasks again. The output to the console on bootup will look like this when everything works: Running tests on trace events: Testing event kfree_skb: OK Testing event kmalloc: OK Testing event kmem_cache_alloc: OK Testing event kmalloc_node: OK Testing event kmem_cache_alloc_node: OK Testing event kfree: OK Testing event kmem_cache_free: OK Testing event irq_handler_exit: OK Testing event irq_handler_entry: OK Testing event softirq_entry: OK Testing event softirq_exit: OK Testing event lock_acquire: OK Testing event lock_release: OK Testing event sched_kthread_stop: OK Testing event sched_kthread_stop_ret: OK Testing event sched_wait_task: OK Testing event sched_wakeup: OK Testing event sched_wakeup_new: OK Testing event sched_switch: OK Testing event sched_migrate_task: OK Testing event sched_process_free: OK Testing event sched_process_exit: OK Testing event sched_process_wait: OK Testing event sched_process_fork: OK Testing event sched_signal_send: OK Running tests on trace event systems: Testing event system skb: OK Testing event system kmem: OK Testing event system irq: OK Testing event system lockdep: OK Testing event system sched: OK Running tests on all trace events: Testing all events: OK [ folded in: tracing: add #include <linux/delay.h> to fix build failure in test_work() This build failure occured on a few rare configs: kernel/trace/trace_events.c: In function ‘test_work’: kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’ kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’ delay.h is included in way too many other headers, hiding cases where new usage is added without header inclusion. [ Impact: build fix ] Signed-off-by: Ingo Molnar <mingo@elte.hu> ] [ Impact: add event tracer self-tests ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-15 21:36:40 +04:00
#endif