License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
2006-03-27 13:16:02 +04:00
/*
* linux / mm / mmzone . c
*
2013-02-23 04:34:46 +04:00
* management codes for pgdats , zones and page flags
2006-03-27 13:16:02 +04:00
*/
# include <linux/stddef.h>
2009-05-13 20:34:48 +04:00
# include <linux/mm.h>
2006-03-27 13:16:02 +04:00
# include <linux/mmzone.h>
struct pglist_data * first_online_pgdat ( void )
{
return NODE_DATA ( first_online_node ) ;
}
struct pglist_data * next_online_pgdat ( struct pglist_data * pgdat )
{
int nid = next_online_node ( pgdat - > node_id ) ;
if ( nid = = MAX_NUMNODES )
return NULL ;
return NODE_DATA ( nid ) ;
}
/*
* next_zone - helper magic for for_each_zone ( )
*/
struct zone * next_zone ( struct zone * zone )
{
pg_data_t * pgdat = zone - > zone_pgdat ;
if ( zone < pgdat - > node_zones + MAX_NR_ZONES - 1 )
zone + + ;
else {
pgdat = next_online_pgdat ( pgdat ) ;
if ( pgdat )
zone = pgdat - > node_zones ;
else
zone = NULL ;
}
return zone ;
}
2008-04-28 13:12:18 +04:00
static inline int zref_in_nodemask ( struct zoneref * zref , nodemask_t * nodes )
{
# ifdef CONFIG_NUMA
return node_isset ( zonelist_node_idx ( zref ) , * nodes ) ;
# else
return 1 ;
# endif /* CONFIG_NUMA */
}
/* Returns the next zone at or below highest_zoneidx in a zonelist */
2016-05-20 03:13:30 +03:00
struct zoneref * __next_zones_zonelist ( struct zoneref * z ,
2008-04-28 13:12:18 +04:00
enum zone_type highest_zoneidx ,
2015-02-12 02:25:47 +03:00
nodemask_t * nodes )
2008-04-28 13:12:18 +04:00
{
/*
* Find the next suitable zone to use for the allocation .
* Only filter based on nodemask if it ' s set
*/
2017-02-23 02:44:47 +03:00
if ( unlikely ( nodes = = NULL ) )
2008-04-28 13:12:18 +04:00
while ( zonelist_zone_idx ( z ) > highest_zoneidx )
z + + ;
else
while ( zonelist_zone_idx ( z ) > highest_zoneidx | |
( z - > zone & & ! zref_in_nodemask ( z , nodes ) ) )
z + + ;
return z ;
}
2009-05-13 20:34:48 +04:00
# ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
2016-01-15 02:19:11 +03:00
bool memmap_valid_within ( unsigned long pfn ,
2009-05-13 20:34:48 +04:00
struct page * page , struct zone * zone )
{
if ( page_to_pfn ( page ) ! = pfn )
2016-01-15 02:19:11 +03:00
return false ;
2009-05-13 20:34:48 +04:00
if ( page_zone ( page ) ! = zone )
2016-01-15 02:19:11 +03:00
return false ;
2009-05-13 20:34:48 +04:00
2016-01-15 02:19:11 +03:00
return true ;
2009-05-13 20:34:48 +04:00
}
# endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
2012-05-30 02:06:58 +04:00
memcg: fix hotplugged memory zone oops
When MEMCG is configured on (even when it's disabled by boot option),
when adding or removing a page to/from its lru list, the zone pointer
used for stats updates is nowadays taken from the struct lruvec. (On
many configurations, calculating zone from page is slower.)
But we have no code to update all the lruvecs (per zone, per memcg) when
a memory node is hotadded. Here's an extract from the oops which
results when running numactl to bind a program to a newly onlined node:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000f60
IP: __mod_zone_page_state+0x9/0x60
Pid: 1219, comm: numactl Not tainted 3.6.0-rc5+ #180 Bochs Bochs
Process numactl (pid: 1219, threadinfo ffff880039abc000, task ffff8800383c4ce0)
Call Trace:
__pagevec_lru_add_fn+0xdf/0x140
pagevec_lru_move_fn+0xb1/0x100
__pagevec_lru_add+0x1c/0x30
lru_add_drain_cpu+0xa3/0x130
lru_add_drain+0x2f/0x40
...
The natural solution might be to use a memcg callback whenever memory is
hotadded; but that solution has not been scoped out, and it happens that
we do have an easy location at which to update lruvec->zone. The lruvec
pointer is discovered either by mem_cgroup_zone_lruvec() or by
mem_cgroup_page_lruvec(), and both of those do know the right zone.
So check and set lruvec->zone in those; and remove the inadequate
attempt to set lruvec->zone from lruvec_init(), which is called before
NODE_DATA(node) has been allocated in such cases.
Ah, there was one exceptionr. For no particularly good reason,
mem_cgroup_force_empty_list() has its own code for deciding lruvec.
Change it to use the standard mem_cgroup_zone_lruvec() and
mem_cgroup_get_lru_size() too. In fact it was already safe against such
an oops (the lru lists in danger could only be empty), but we're better
proofed against future changes this way.
I've marked this for stable (3.6) since we introduced the problem in 3.5
(now closed to stable); but I have no idea if this is the only fix
needed to get memory hotadd working with memcg in 3.6, and received no
answer when I enquired twice before.
Reported-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-17 02:14:54 +04:00
void lruvec_init ( struct lruvec * lruvec )
2012-05-30 02:06:58 +04:00
{
enum lru_list lru ;
memset ( lruvec , 0 , sizeof ( struct lruvec ) ) ;
for_each_lru ( lru )
INIT_LIST_HEAD ( & lruvec - > lists [ lru ] ) ;
}
2013-02-23 04:34:46 +04:00
2013-10-07 14:29:20 +04:00
# if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS)
int page_cpupid_xchg_last ( struct page * page , int cpupid )
2013-02-23 04:34:46 +04:00
{
unsigned long old_flags , flags ;
2013-10-07 14:29:20 +04:00
int last_cpupid ;
2013-02-23 04:34:46 +04:00
do {
old_flags = flags = page - > flags ;
2013-10-07 14:29:20 +04:00
last_cpupid = page_cpupid_last ( page ) ;
2013-02-23 04:34:46 +04:00
2013-10-07 14:29:20 +04:00
flags & = ~ ( LAST_CPUPID_MASK < < LAST_CPUPID_PGSHIFT ) ;
flags | = ( cpupid & LAST_CPUPID_MASK ) < < LAST_CPUPID_PGSHIFT ;
2013-02-23 04:34:46 +04:00
} while ( unlikely ( cmpxchg ( & page - > flags , old_flags , flags ) ! = old_flags ) ) ;
2013-10-07 14:29:20 +04:00
return last_cpupid ;
2013-02-23 04:34:46 +04:00
}
# endif