2008-04-24 04:48:40 +04:00
/*
* DEC I / O ASIC ' s counter clocksource
*
2013-01-22 15:59:30 +04:00
* Copyright ( C ) 2008 Yoichi Yuasa < yuasa @ linux - mips . org >
2008-04-24 04:48:40 +04:00
*
* This program is free software ; you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation ; either version 2 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*/
# include <linux/clocksource.h>
2015-03-07 21:30:28 +03:00
# include <linux/sched_clock.h>
2008-04-24 04:48:40 +04:00
# include <linux/init.h>
# include <asm/ds1287.h>
# include <asm/time.h>
# include <asm/dec/ioasic.h>
# include <asm/dec/ioasic_addrs.h>
2016-12-21 22:32:01 +03:00
static u64 dec_ioasic_hpt_read ( struct clocksource * cs )
2008-04-24 04:48:40 +04:00
{
return ioasic_read ( IO_REG_FCTR ) ;
}
static struct clocksource clocksource_dec = {
. name = " dec-ioasic " ,
. read = dec_ioasic_hpt_read ,
. mask = CLOCKSOURCE_MASK ( 32 ) ,
. flags = CLOCK_SOURCE_IS_CONTINUOUS ,
} ;
2015-03-07 21:30:28 +03:00
static u64 notrace dec_ioasic_read_sched_clock ( void )
{
return ioasic_read ( IO_REG_FCTR ) ;
}
2013-09-12 15:01:53 +04:00
int __init dec_ioasic_clocksource_init ( void )
2008-04-24 04:48:40 +04:00
{
unsigned int freq ;
u32 start , end ;
MIPS: DECstation HRT calibration bug fixes
This change corrects DECstation HRT calibration, by removing the following
bugs:
1. Calibration period selection -- HZ / 10 has been chosen, however on
DECstation computers, HZ never divides by 10, as the choice for HZ is
among 128, 256 and 1024. The choice therefore results in a systematic
calibration error, e.g. 6.25% for the usual choice of 128 for HZ:
128 / 10 * 10 = 120
(128 - 120) / 128 -> 6.25%
The change therefore makes calibration use HZ / 8 that is always
accurate for the HZ values available, getting rid of the systematic
error.
2. Calibration starting point synchronisation -- the duration of a number
of intervals between DS1287A periodic interrupt assertions is measured,
however code does not ensure at the beginning that the interrupt has
not been previously asserted. This results in a variable error of e.g.
up to another 6.25% for the period of HZ / 8 (8.(3)% with the original
HZ / 10 period) and the usual choice of 128 for HZ:
1 / 16 -> 6.25%
1 / 12 -> 8.(3)%
The change therefore adds an initial call to ds1287_timer_state that
clears any previous periodic interrupt pending.
The same issue applies to both I/O ASIC counter and R4k CP0 timer
calibration on DECstation systems as similar code is used in both cases
and both pieces of code are covered by this fix.
On an R3400 test system used this fix results in a change of the I/O ASIC
clock frequency reported from values like:
I/O ASIC clock frequency 23185830Hz
to:
I/O ASIC clock frequency 24999288Hz
removing the miscalculation by 6.25% from the systematic error and (for
the individual sample provided) a further 1.00% from the variable error,
accordingly. The nominal I/O ASIC clock frequency is 25MHz on this
system.
Here's another result, with the fix applied, from a system that has both
HRTs available (using an R4400 at 60MHz nominal):
MIPS counter frequency 59999328Hz
I/O ASIC clock frequency 24999432Hz
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-05 02:47:45 +04:00
int i = HZ / 8 ;
2008-04-24 04:48:40 +04:00
MIPS: DECstation HRT calibration bug fixes
This change corrects DECstation HRT calibration, by removing the following
bugs:
1. Calibration period selection -- HZ / 10 has been chosen, however on
DECstation computers, HZ never divides by 10, as the choice for HZ is
among 128, 256 and 1024. The choice therefore results in a systematic
calibration error, e.g. 6.25% for the usual choice of 128 for HZ:
128 / 10 * 10 = 120
(128 - 120) / 128 -> 6.25%
The change therefore makes calibration use HZ / 8 that is always
accurate for the HZ values available, getting rid of the systematic
error.
2. Calibration starting point synchronisation -- the duration of a number
of intervals between DS1287A periodic interrupt assertions is measured,
however code does not ensure at the beginning that the interrupt has
not been previously asserted. This results in a variable error of e.g.
up to another 6.25% for the period of HZ / 8 (8.(3)% with the original
HZ / 10 period) and the usual choice of 128 for HZ:
1 / 16 -> 6.25%
1 / 12 -> 8.(3)%
The change therefore adds an initial call to ds1287_timer_state that
clears any previous periodic interrupt pending.
The same issue applies to both I/O ASIC counter and R4k CP0 timer
calibration on DECstation systems as similar code is used in both cases
and both pieces of code are covered by this fix.
On an R3400 test system used this fix results in a change of the I/O ASIC
clock frequency reported from values like:
I/O ASIC clock frequency 23185830Hz
to:
I/O ASIC clock frequency 24999288Hz
removing the miscalculation by 6.25% from the systematic error and (for
the individual sample provided) a further 1.00% from the variable error,
accordingly. The nominal I/O ASIC clock frequency is 25MHz on this
system.
Here's another result, with the fix applied, from a system that has both
HRTs available (using an R4400 at 60MHz nominal):
MIPS counter frequency 59999328Hz
I/O ASIC clock frequency 24999432Hz
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-05 02:47:45 +04:00
ds1287_timer_state ( ) ;
2008-04-24 04:48:40 +04:00
while ( ! ds1287_timer_state ( ) )
;
2009-04-21 23:24:00 +04:00
start = dec_ioasic_hpt_read ( & clocksource_dec ) ;
2008-04-24 04:48:40 +04:00
while ( i - - )
while ( ! ds1287_timer_state ( ) )
;
2009-04-21 23:24:00 +04:00
end = dec_ioasic_hpt_read ( & clocksource_dec ) ;
2008-04-24 04:48:40 +04:00
MIPS: DECstation HRT calibration bug fixes
This change corrects DECstation HRT calibration, by removing the following
bugs:
1. Calibration period selection -- HZ / 10 has been chosen, however on
DECstation computers, HZ never divides by 10, as the choice for HZ is
among 128, 256 and 1024. The choice therefore results in a systematic
calibration error, e.g. 6.25% for the usual choice of 128 for HZ:
128 / 10 * 10 = 120
(128 - 120) / 128 -> 6.25%
The change therefore makes calibration use HZ / 8 that is always
accurate for the HZ values available, getting rid of the systematic
error.
2. Calibration starting point synchronisation -- the duration of a number
of intervals between DS1287A periodic interrupt assertions is measured,
however code does not ensure at the beginning that the interrupt has
not been previously asserted. This results in a variable error of e.g.
up to another 6.25% for the period of HZ / 8 (8.(3)% with the original
HZ / 10 period) and the usual choice of 128 for HZ:
1 / 16 -> 6.25%
1 / 12 -> 8.(3)%
The change therefore adds an initial call to ds1287_timer_state that
clears any previous periodic interrupt pending.
The same issue applies to both I/O ASIC counter and R4k CP0 timer
calibration on DECstation systems as similar code is used in both cases
and both pieces of code are covered by this fix.
On an R3400 test system used this fix results in a change of the I/O ASIC
clock frequency reported from values like:
I/O ASIC clock frequency 23185830Hz
to:
I/O ASIC clock frequency 24999288Hz
removing the miscalculation by 6.25% from the systematic error and (for
the individual sample provided) a further 1.00% from the variable error,
accordingly. The nominal I/O ASIC clock frequency is 25MHz on this
system.
Here's another result, with the fix applied, from a system that has both
HRTs available (using an R4400 at 60MHz nominal):
MIPS counter frequency 59999328Hz
I/O ASIC clock frequency 24999432Hz
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5807/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-05 02:47:45 +04:00
freq = ( end - start ) * 8 ;
2013-09-12 15:01:53 +04:00
/* An early revision of the I/O ASIC didn't have the counter. */
if ( ! freq )
return - ENXIO ;
2008-04-24 04:48:40 +04:00
printk ( KERN_INFO " I/O ASIC clock frequency %dHz \n " , freq ) ;
clocksource_dec . rating = 200 + freq / 10000000 ;
2010-04-27 07:23:11 +04:00
clocksource_register_hz ( & clocksource_dec , freq ) ;
2015-03-07 21:30:28 +03:00
sched_clock_register ( dec_ioasic_read_sched_clock , 32 , freq ) ;
2013-09-12 15:01:53 +04:00
return 0 ;
2008-04-24 04:48:40 +04:00
}