linux/kernel/taskstats.c

684 lines
15 KiB
C
Raw Normal View History

/*
* taskstats.c - Export per-task statistics to userland
*
* Copyright (C) Shailabh Nagar, IBM Corp. 2006
* (C) Balbir Singh, IBM Corp. 2006
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/taskstats_kern.h>
#include <linux/tsacct_kern.h>
#include <linux/delayacct.h>
#include <linux/cpumask.h>
#include <linux/percpu.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
#include <linux/cgroupstats.h>
#include <linux/cgroup.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pid_namespace.h>
#include <net/genetlink.h>
#include <linux/atomic.h>
/*
* Maximum length of a cpumask that can be specified in
* the TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK attribute
*/
#define TASKSTATS_CPUMASK_MAXLEN (100+6*NR_CPUS)
static DEFINE_PER_CPU(__u32, taskstats_seqnum);
static int family_registered;
struct kmem_cache *taskstats_cache;
static struct genl_family family = {
.id = GENL_ID_GENERATE,
.name = TASKSTATS_GENL_NAME,
.version = TASKSTATS_GENL_VERSION,
.maxattr = TASKSTATS_CMD_ATTR_MAX,
};
static const struct nla_policy taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1] = {
[TASKSTATS_CMD_ATTR_PID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_TGID] = { .type = NLA_U32 },
[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = { .type = NLA_STRING },
[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK] = { .type = NLA_STRING },};
static const struct nla_policy cgroupstats_cmd_get_policy[CGROUPSTATS_CMD_ATTR_MAX+1] = {
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
[CGROUPSTATS_CMD_ATTR_FD] = { .type = NLA_U32 },
};
struct listener {
struct list_head list;
pid_t pid;
char valid;
};
struct listener_list {
struct rw_semaphore sem;
struct list_head list;
};
static DEFINE_PER_CPU(struct listener_list, listener_array);
enum actions {
REGISTER,
DEREGISTER,
CPU_DONT_CARE
};
static int prepare_reply(struct genl_info *info, u8 cmd, struct sk_buff **skbp,
size_t size)
{
struct sk_buff *skb;
void *reply;
/*
* If new attributes are added, please revisit this allocation
*/
skb = genlmsg_new(size, GFP_KERNEL);
if (!skb)
return -ENOMEM;
if (!info) {
int seq = this_cpu_inc_return(taskstats_seqnum) - 1;
reply = genlmsg_put(skb, 0, seq, &family, 0, cmd);
} else
reply = genlmsg_put_reply(skb, info, &family, 0, cmd);
if (reply == NULL) {
nlmsg_free(skb);
return -EINVAL;
}
*skbp = skb;
return 0;
}
/*
* Send taskstats data in @skb to listener with nl_pid @pid
*/
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 13:51:34 +04:00
static int send_reply(struct sk_buff *skb, struct genl_info *info)
{
struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb));
void *reply = genlmsg_data(genlhdr);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 00:09:00 +03:00
genlmsg_end(skb, reply);
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 13:51:34 +04:00
return genlmsg_reply(skb, info);
}
/*
* Send taskstats data in @skb to listeners registered for @cpu's exit data
*/
static void send_cpu_listeners(struct sk_buff *skb,
struct listener_list *listeners)
{
struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb));
struct listener *s, *tmp;
struct sk_buff *skb_next, *skb_cur = skb;
void *reply = genlmsg_data(genlhdr);
int rc, delcount = 0;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 00:09:00 +03:00
genlmsg_end(skb, reply);
rc = 0;
down_read(&listeners->sem);
list_for_each_entry(s, &listeners->list, list) {
skb_next = NULL;
if (!list_is_last(&s->list, &listeners->list)) {
skb_next = skb_clone(skb_cur, GFP_KERNEL);
if (!skb_next)
break;
}
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 13:51:34 +04:00
rc = genlmsg_unicast(&init_net, skb_cur, s->pid);
if (rc == -ECONNREFUSED) {
s->valid = 0;
delcount++;
}
skb_cur = skb_next;
}
up_read(&listeners->sem);
if (skb_cur)
nlmsg_free(skb_cur);
if (!delcount)
return;
/* Delete invalidated entries */
down_write(&listeners->sem);
list_for_each_entry_safe(s, tmp, &listeners->list, list) {
if (!s->valid) {
list_del(&s->list);
kfree(s);
}
}
up_write(&listeners->sem);
}
static void fill_stats(struct user_namespace *user_ns,
struct pid_namespace *pid_ns,
struct task_struct *tsk, struct taskstats *stats)
{
memset(stats, 0, sizeof(*stats));
/*
* Each accounting subsystem adds calls to its functions to
* fill in relevant parts of struct taskstsats as follows
*
* per-task-foo(stats, tsk);
*/
delayacct_add_tsk(stats, tsk);
/* fill in basic acct fields */
stats->version = TASKSTATS_VERSION;
stats->nvcsw = tsk->nvcsw;
stats->nivcsw = tsk->nivcsw;
bacct_add_tsk(user_ns, pid_ns, stats, tsk);
/* fill in extended acct fields */
xacct_add_tsk(stats, tsk);
}
static int fill_stats_for_pid(pid_t pid, struct taskstats *stats)
{
struct task_struct *tsk;
rcu_read_lock();
tsk = find_task_by_vpid(pid);
if (tsk)
get_task_struct(tsk);
rcu_read_unlock();
if (!tsk)
return -ESRCH;
fill_stats(current_user_ns(), task_active_pid_ns(current), tsk, stats);
put_task_struct(tsk);
return 0;
}
static int fill_stats_for_tgid(pid_t tgid, struct taskstats *stats)
{
struct task_struct *tsk, *first;
unsigned long flags;
int rc = -ESRCH;
/*
* Add additional stats from live tasks except zombie thread group
* leaders who are already counted with the dead tasks
*/
rcu_read_lock();
first = find_task_by_vpid(tgid);
if (!first || !lock_task_sighand(first, &flags))
goto out;
if (first->signal->stats)
memcpy(stats, first->signal->stats, sizeof(*stats));
else
memset(stats, 0, sizeof(*stats));
tsk = first;
do {
if (tsk->exit_state)
continue;
/*
* Accounting subsystem can call its functions here to
* fill in relevant parts of struct taskstsats as follows
*
* per-task-foo(stats, tsk);
*/
delayacct_add_tsk(stats, tsk);
stats->nvcsw += tsk->nvcsw;
stats->nivcsw += tsk->nivcsw;
} while_each_thread(first, tsk);
unlock_task_sighand(first, &flags);
rc = 0;
out:
rcu_read_unlock();
stats->version = TASKSTATS_VERSION;
/*
* Accounting subsystems can also add calls here to modify
* fields of taskstats.
*/
return rc;
}
static void fill_tgid_exit(struct task_struct *tsk)
{
unsigned long flags;
spin_lock_irqsave(&tsk->sighand->siglock, flags);
if (!tsk->signal->stats)
goto ret;
/*
* Each accounting subsystem calls its functions here to
* accumalate its per-task stats for tsk, into the per-tgid structure
*
* per-task-foo(tsk->signal->stats, tsk);
*/
delayacct_add_tsk(tsk->signal->stats, tsk);
ret:
spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
return;
}
static int add_del_listener(pid_t pid, const struct cpumask *mask, int isadd)
{
struct listener_list *listeners;
struct listener *s, *tmp, *s2;
unsigned int cpu;
int ret = 0;
if (!cpumask_subset(mask, cpu_possible_mask))
return -EINVAL;
if (current_user_ns() != &init_user_ns)
return -EINVAL;
if (task_active_pid_ns(current) != &init_pid_ns)
return -EINVAL;
if (isadd == REGISTER) {
for_each_cpu(cpu, mask) {
s = kmalloc_node(sizeof(struct listener),
GFP_KERNEL, cpu_to_node(cpu));
if (!s) {
ret = -ENOMEM;
goto cleanup;
}
s->pid = pid;
s->valid = 1;
listeners = &per_cpu(listener_array, cpu);
down_write(&listeners->sem);
list_for_each_entry(s2, &listeners->list, list) {
if (s2->pid == pid && s2->valid)
goto exists;
}
list_add(&s->list, &listeners->list);
s = NULL;
exists:
up_write(&listeners->sem);
kfree(s); /* nop if NULL */
}
return 0;
}
/* Deregister or cleanup */
cleanup:
for_each_cpu(cpu, mask) {
listeners = &per_cpu(listener_array, cpu);
down_write(&listeners->sem);
list_for_each_entry_safe(s, tmp, &listeners->list, list) {
if (s->pid == pid) {
list_del(&s->list);
kfree(s);
break;
}
}
up_write(&listeners->sem);
}
return ret;
}
static int parse(struct nlattr *na, struct cpumask *mask)
{
char *data;
int len;
int ret;
if (na == NULL)
return 1;
len = nla_len(na);
if (len > TASKSTATS_CPUMASK_MAXLEN)
return -E2BIG;
if (len < 1)
return -EINVAL;
data = kmalloc(len, GFP_KERNEL);
if (!data)
return -ENOMEM;
nla_strlcpy(data, na, len);
ret = cpulist_parse(data, mask);
kfree(data);
return ret;
}
static struct taskstats *mk_reply(struct sk_buff *skb, int type, u32 pid)
{
struct nlattr *na, *ret;
int aggr;
aggr = (type == TASKSTATS_TYPE_PID)
? TASKSTATS_TYPE_AGGR_PID
: TASKSTATS_TYPE_AGGR_TGID;
na = nla_nest_start(skb, aggr);
if (!na)
goto err;
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
if (nla_put(skb, type, sizeof(pid), &pid) < 0) {
nla_nest_cancel(skb, na);
goto err;
}
ret = nla_reserve_64bit(skb, TASKSTATS_TYPE_STATS,
sizeof(struct taskstats), TASKSTATS_TYPE_NULL);
if (!ret) {
nla_nest_cancel(skb, na);
goto err;
}
nla_nest_end(skb, na);
return nla_data(ret);
err:
return NULL;
}
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
static int cgroupstats_user_cmd(struct sk_buff *skb, struct genl_info *info)
{
int rc = 0;
struct sk_buff *rep_skb;
struct cgroupstats *stats;
struct nlattr *na;
size_t size;
u32 fd;
struct fd f;
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
na = info->attrs[CGROUPSTATS_CMD_ATTR_FD];
if (!na)
return -EINVAL;
fd = nla_get_u32(info->attrs[CGROUPSTATS_CMD_ATTR_FD]);
f = fdget(fd);
if (!f.file)
return 0;
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
size = nla_total_size(sizeof(struct cgroupstats));
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
rc = prepare_reply(info, CGROUPSTATS_CMD_NEW, &rep_skb,
size);
if (rc < 0)
goto err;
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
na = nla_reserve(rep_skb, CGROUPSTATS_TYPE_CGROUP_STATS,
sizeof(struct cgroupstats));
if (na == NULL) {
nlmsg_free(rep_skb);
rc = -EMSGSIZE;
goto err;
}
stats = nla_data(na);
memset(stats, 0, sizeof(*stats));
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
rc = cgroupstats_build(stats, f.file->f_path.dentry);
if (rc < 0) {
nlmsg_free(rep_skb);
goto err;
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
}
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 13:51:34 +04:00
rc = send_reply(rep_skb, info);
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
err:
fdput(f);
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
return rc;
}
static int cmd_attr_register_cpumask(struct genl_info *info)
{
cpumask_var_t mask;
int rc;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
rc = parse(info->attrs[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK], mask);
if (rc < 0)
goto out;
rc = add_del_listener(info->snd_portid, mask, REGISTER);
out:
free_cpumask_var(mask);
return rc;
}
static int cmd_attr_deregister_cpumask(struct genl_info *info)
{
cpumask_var_t mask;
int rc;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
rc = parse(info->attrs[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK], mask);
if (rc < 0)
goto out;
rc = add_del_listener(info->snd_portid, mask, DEREGISTER);
out:
free_cpumask_var(mask);
return rc;
}
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
static size_t taskstats_packet_size(void)
{
size_t size;
size = nla_total_size(sizeof(u32)) +
nla_total_size_64bit(sizeof(struct taskstats)) +
nla_total_size(0);
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
return size;
}
static int cmd_attr_pid(struct genl_info *info)
{
struct taskstats *stats;
struct sk_buff *rep_skb;
size_t size;
u32 pid;
int rc;
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
size = taskstats_packet_size();
rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
if (rc < 0)
return rc;
rc = -EINVAL;
pid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_PID]);
stats = mk_reply(rep_skb, TASKSTATS_TYPE_PID, pid);
if (!stats)
goto err;
rc = fill_stats_for_pid(pid, stats);
if (rc < 0)
goto err;
genetlink: make netns aware This makes generic netlink network namespace aware. No generic netlink families except for the controller family are made namespace aware, they need to be checked one by one and then set the family->netnsok member to true. A new function genlmsg_multicast_netns() is introduced to allow sending a multicast message in a given namespace, for example when it applies to an object that lives in that namespace, a new function genlmsg_multicast_allns() to send a message to all network namespaces (for objects that do not have an associated netns). The function genlmsg_multicast() is changed to multicast the message in just init_net, which is currently correct for all generic netlink families since they only work in init_net right now. Some will later want to work in all net namespaces because they do not care about the netns at all -- those will have to be converted to use one of the new functions genlmsg_multicast_allns() or genlmsg_multicast_netns() whenever they are made netns aware in some way. After this patch families can easily decide whether or not they should be available in all net namespaces. Many genl families us it for objects not related to networking and should therefore be available in all namespaces, but that will have to be done on a per family basis. Note that this doesn't touch on the checkpoint/restart problem where network namespaces could be used, genl families and multicast groups are numbered globally and I see no easy way of changing that, especially since it must be possible to multicast to all network namespaces for those families that do not care about netns. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-10 13:51:34 +04:00
return send_reply(rep_skb, info);
err:
nlmsg_free(rep_skb);
return rc;
}
static int cmd_attr_tgid(struct genl_info *info)
{
struct taskstats *stats;
struct sk_buff *rep_skb;
size_t size;
u32 tgid;
int rc;
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
size = taskstats_packet_size();
rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
if (rc < 0)
return rc;
rc = -EINVAL;
tgid = nla_get_u32(info->attrs[TASKSTATS_CMD_ATTR_TGID]);
stats = mk_reply(rep_skb, TASKSTATS_TYPE_TGID, tgid);
if (!stats)
goto err;
rc = fill_stats_for_tgid(tgid, stats);
if (rc < 0)
goto err;
return send_reply(rep_skb, info);
err:
nlmsg_free(rep_skb);
return rc;
}
static int taskstats_user_cmd(struct sk_buff *skb, struct genl_info *info)
{
if (info->attrs[TASKSTATS_CMD_ATTR_REGISTER_CPUMASK])
return cmd_attr_register_cpumask(info);
else if (info->attrs[TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK])
return cmd_attr_deregister_cpumask(info);
else if (info->attrs[TASKSTATS_CMD_ATTR_PID])
return cmd_attr_pid(info);
else if (info->attrs[TASKSTATS_CMD_ATTR_TGID])
return cmd_attr_tgid(info);
else
return -EINVAL;
}
static struct taskstats *taskstats_tgid_alloc(struct task_struct *tsk)
{
struct signal_struct *sig = tsk->signal;
struct taskstats *stats;
if (sig->stats || thread_group_empty(tsk))
goto ret;
/* No problem if kmem_cache_zalloc() fails */
stats = kmem_cache_zalloc(taskstats_cache, GFP_KERNEL);
spin_lock_irq(&tsk->sighand->siglock);
if (!sig->stats) {
sig->stats = stats;
stats = NULL;
}
spin_unlock_irq(&tsk->sighand->siglock);
if (stats)
kmem_cache_free(taskstats_cache, stats);
ret:
return sig->stats;
}
/* Send pid data out on exit */
void taskstats_exit(struct task_struct *tsk, int group_dead)
{
int rc;
struct listener_list *listeners;
struct taskstats *stats;
struct sk_buff *rep_skb;
size_t size;
int is_thread_group;
if (!family_registered)
return;
/*
* Size includes space for nested attributes
*/
taskstats: pad taskstats netlink response for aligment issues on ia64 The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reported-by: Brian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-22 04:24:30 +03:00
size = taskstats_packet_size();
is_thread_group = !!taskstats_tgid_alloc(tsk);
if (is_thread_group) {
/* PID + STATS + TGID + STATS */
size = 2 * size;
/* fill the tsk->signal->stats structure */
fill_tgid_exit(tsk);
}
listeners = raw_cpu_ptr(&listener_array);
if (list_empty(&listeners->list))
return;
rc = prepare_reply(NULL, TASKSTATS_CMD_NEW, &rep_skb, size);
if (rc < 0)
return;
stats = mk_reply(rep_skb, TASKSTATS_TYPE_PID,
task_pid_nr_ns(tsk, &init_pid_ns));
if (!stats)
goto err;
fill_stats(&init_user_ns, &init_pid_ns, tsk, stats);
/*
* Doesn't matter if tsk is the leader or the last group member leaving
*/
if (!is_thread_group || !group_dead)
goto send;
stats = mk_reply(rep_skb, TASKSTATS_TYPE_TGID,
task_tgid_nr_ns(tsk, &init_pid_ns));
if (!stats)
goto err;
memcpy(stats, tsk->signal->stats, sizeof(*stats));
send:
send_cpu_listeners(rep_skb, listeners);
return;
err:
nlmsg_free(rep_skb);
}
static const struct genl_ops taskstats_ops[] = {
{
.cmd = TASKSTATS_CMD_GET,
.doit = taskstats_user_cmd,
.policy = taskstats_cmd_get_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = CGROUPSTATS_CMD_GET,
.doit = cgroupstats_user_cmd,
.policy = cgroupstats_cmd_get_policy,
},
Add cgroupstats This patch is inspired by the discussion at http://lkml.org/lkml/2007/4/11/187 and implements per cgroup statistics as suggested by Andrew Morton in http://lkml.org/lkml/2007/4/11/263. The patch is on top of 2.6.21-mm1 with Paul's cgroups v9 patches (forward ported) This patch implements per cgroup statistics infrastructure and re-uses code from the taskstats interface. A new set of cgroup operations are registered with commands and attributes. It should be very easy to *extend* per cgroup statistics, by adding members to the cgroupstats structure. The current model for cgroupstats is a pull, a push model (to post statistics on interesting events), should be very easy to add. Currently user space requests for statistics by passing the cgroup file descriptor. Statistics about the state of all the tasks in the cgroup is returned to user space. TODO's/NOTE: This patch provides an infrastructure for implementing cgroup statistics. Based on the needs of each controller, we can incrementally add more statistics, event based support for notification of statistics, accumulation of taskstats into cgroup statistics in the future. Sample output # ./cgroupstats -C /cgroup/a sleeping 2, blocked 0, running 1, stopped 0, uninterruptible 0 # ./cgroupstats -C /cgroup/ sleeping 154, blocked 0, running 0, stopped 0, uninterruptible 0 If the approach looks good, I'll enhance and post the user space utility for the same Feedback, comments, test results are always welcome! [akpm@linux-foundation.org: build fix] Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Jay Lan <jlan@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 10:39:44 +04:00
};
/* Needed early in initialization */
void __init taskstats_init_early(void)
{
unsigned int i;
taskstats_cache = KMEM_CACHE(taskstats, SLAB_PANIC);
for_each_possible_cpu(i) {
INIT_LIST_HEAD(&(per_cpu(listener_array, i).list));
init_rwsem(&(per_cpu(listener_array, i).sem));
}
}
static int __init taskstats_init(void)
{
int rc;
rc = genl_register_family_with_ops(&family, taskstats_ops);
if (rc)
return rc;
family_registered = 1;
pr_info("registered taskstats version %d\n", TASKSTATS_GENL_VERSION);
return 0;
}
/*
* late initcall ensures initialization of statistics collection
* mechanisms precedes initialization of the taskstats interface
*/
late_initcall(taskstats_init);