2012-05-04 17:33:42 +04:00
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "imx23.dtsi"
/ {
model = "Freescale i.MX23 Evaluation Kit";
compatible = "fsl,imx23-evk", "fsl,imx23";
memory {
reg = <0x40000000 0x08000000>;
};
apb@80000000 {
2012-05-06 12:29:36 +04:00
apbh@80000000 {
2012-07-03 08:58:13 +04:00
gpmi-nand@8000c000 {
pinctrl-names = "default";
pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
status = "okay";
};
2012-05-06 12:29:36 +04:00
ssp0: ssp@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
2012-06-28 07:44:59 +04:00
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
bus-width = <4>;
2012-05-06 12:29:36 +04:00
wp-gpios = <&gpio1 30 0>;
2012-06-28 07:44:59 +04:00
vmmc-supply = <®_vddio_sd0>;
2012-05-06 12:29:36 +04:00
status = "okay";
};
2012-06-28 07:44:58 +04:00
pinctrl@80018000 {
pinctrl-names = "default";
pinctrl-0 = <&hog_pins_a>;
2012-08-22 20:25:31 +04:00
hog_pins_a: hog@0 {
2012-06-28 07:44:58 +04:00
reg = <0>;
fsl,pinmux-ids = <
0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
2012-08-22 20:25:32 +04:00
0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
2012-06-28 07:44:58 +04:00
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
2012-06-28 07:45:07 +04:00
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_24bit_pins_a>;
2013-04-07 22:44:59 +04:00
lcd-supply = <®_lcd_3v3>;
2013-03-14 07:37:15 +04:00
display = <&display>;
2012-06-28 07:45:07 +04:00
status = "okay";
2013-03-14 07:37:15 +04:00
display: display {
bits-per-pixel = <32>;
bus-width = <24>;
display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <9200000>;
hactive = <480>;
vactive = <272>;
hback-porch = <15>;
hfront-porch = <8>;
vback-porch = <12>;
vfront-porch = <4>;
hsync-len = <1>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
2012-06-28 07:45:07 +04:00
};
2012-05-06 12:29:36 +04:00
};
2012-05-04 17:33:42 +04:00
apbx@80040000 {
2012-06-28 07:45:06 +04:00
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
status = "okay";
};
2012-06-28 07:45:00 +04:00
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
status = "okay";
};
2012-05-04 17:33:42 +04:00
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
};
};
2012-06-28 07:44:59 +04:00
regulators {
compatible = "simple-bus";
reg_vddio_sd0: vddio-sd0 {
compatible = "regulator-fixed";
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
2013-04-07 22:44:59 +04:00
reg_lcd_3v3: lcd-3v3 {
compatible = "regulator-fixed";
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 18 0>;
enable-active-high;
};
2012-06-28 07:44:59 +04:00
};
2012-06-28 07:45:06 +04:00
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 2 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
2012-05-04 17:33:42 +04:00
};