2009-12-26 03:36:53 +03:00
menu "IEEE 1394 (FireWire) support"
2014-07-09 23:04:00 +04:00
depends on HAS_DMA
2014-05-15 17:29:23 +04:00
depends on PCI || COMPILE_TEST
2009-12-26 03:36:53 +03:00
# firewire-core does not depend on PCI but is
# not useful without PCI controller driver
2007-03-18 03:39:28 +03:00
config FIREWIRE
2009-06-17 00:36:34 +04:00
tristate "FireWire driver stack"
2007-05-08 04:33:31 +04:00
select CRC_ITU_T
2006-12-20 03:58:27 +03:00
help
2009-06-17 00:36:34 +04:00
This is the new-generation IEEE 1394 (FireWire) driver stack
a.k.a. Juju, a new implementation designed for robustness and
simplicity.
See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
for information about migration from the older Linux 1394 stack
to the new driver stack.
2006-12-20 03:58:27 +03:00
2007-06-26 00:18:40 +04:00
To compile this driver as a module, say M here: the module will be
2008-07-25 18:24:19 +04:00
called firewire-core.
2007-03-18 03:39:28 +03:00
config FIREWIRE_OHCI
2008-06-14 16:24:53 +04:00
tristate "OHCI-1394 controllers"
2010-11-26 10:57:31 +03:00
depends on PCI && FIREWIRE && MMU
2006-12-20 03:58:35 +03:00
help
2007-01-04 20:35:00 +03:00
Enable this driver if you have a FireWire controller based
2006-12-20 03:58:35 +03:00
on the OHCI specification. For all practical purposes, this
is the only chipset in use, so say Y here.
2007-01-08 00:33:59 +03:00
To compile this driver as a module, say M here: The module will be
2009-12-26 03:36:53 +03:00
called firewire-ohci.
2006-12-20 03:58:35 +03:00
2007-03-18 03:39:28 +03:00
config FIREWIRE_SBP2
2008-06-14 16:24:53 +04:00
tristate "Storage devices (SBP-2 protocol)"
2007-03-18 03:39:28 +03:00
depends on FIREWIRE && SCSI
2006-12-20 03:58:40 +03:00
help
2007-01-04 20:35:00 +03:00
This option enables you to use SBP-2 devices connected to a
FireWire bus. SBP-2 devices include storage devices like
2006-12-20 03:58:40 +03:00
harddisks and DVD drives, also some other FireWire devices
like scanners.
2007-01-08 00:33:59 +03:00
To compile this driver as a module, say M here: The module will be
2009-12-26 03:36:53 +03:00
called firewire-sbp2.
2007-01-08 00:33:59 +03:00
2006-12-20 03:58:40 +03:00
You should also enable support for disks, CD-ROMs, etc. in the SCSI
configuration section.
2009-06-08 00:57:53 +04:00
config FIREWIRE_NET
2011-01-20 02:07:46 +03:00
tristate "IP networking over 1394"
depends on FIREWIRE && INET
2009-06-08 00:57:53 +04:00
help
2013-03-25 12:26:24 +04:00
This enables IPv4/IPv6 over IEEE 1394, providing IP connectivity
with other implementations of RFC 2734/3146 as found on several
operating systems. Multicast support is currently limited.
2009-06-08 00:57:53 +04:00
To compile this driver as a module, say M here: The module will be
2009-12-26 03:36:53 +03:00
called firewire-net.
firewire: new driver: nosy - IEEE 1394 traffic sniffer
This adds the traffic sniffer driver for Texas Instruments PCILynx/
PCILynx2 based cards. The use cases for nosy are analysis of
nonstandard protocols and as an aid in development of drivers,
applications, or firmwares.
Author of the driver is Kristian Høgsberg. Known contributers are
Jody McIntyre and Jonathan Woithe.
Nosy programs PCILynx chips to operate in promiscuous mode, which is a
feature that is not found in OHCI-1394 controllers. Hence, only special
hardware as mentioned in the Kconfig help text is suitable for nosy.
This is only the kernelspace part of nosy. There is a userspace
interface to it, called nosy-dump, proposed to be added into the tools/
subdirectory of the kernel sources in a subsequent change. Kernelspace
and userspave component of nosy communicate via a 'misc' character
device file called /dev/nosy with a simple ioctl() and read() based
protocol, as described by nosy-user.h.
The files added here are taken from
git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10)
with the following changes by Stefan Richter:
- Kconfig and Makefile hunks are written from scratch.
- Commented out version printk in nosy.c.
- Included missing <linux/sched.h>, reported by Stephen Rothwell.
"git shortlog nosy{-user.h,.c,.h}" from nosy's git repository:
Jonathan Woithe (2):
Nosy updates for recent kernels
Fix uninitialised memory (needed for 2.6.31 kernel)
Kristian Høgsberg (5):
Pull over nosy from mercurial repo.
Use a misc device instead.
Add simple AV/C decoder.
Don't break down on big payloads.
Set parent device for misc device.
As a low-level IEEE 1394 driver, its files are placed into
drivers/firewire/ although nosy is not part of the firewire driver
stack.
I am aware of the following literature from Texas Instruments about
PCILynx programming:
SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF
Functional Specification
SLLA023 - Initialization and Asynchronous Programming of the
TSB12LV21A 1394 Device
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 12:26:33 +04:00
config FIREWIRE_NOSY
tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
depends on PCI
help
Nosy is an IEEE 1394 packet sniffer that is used for protocol
analysis and in development of IEEE 1394 drivers, applications,
or firmwares.
This driver lets you use a Texas Instruments PCILynx 1394 to PCI
link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
PCILynx is a nowadays very rare IEEE 1394 controller which is
not OHCI 1394 compliant.
The following cards are known to be based on PCILynx or PCILynx-2:
IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
(PCI card), Newer Technology FireWire 2 Go (CardBus card),
2011-01-23 14:26:51 +03:00
Apple Power Mac G3 blue & white and G4 with PCI graphics
(onboard controller).
firewire: new driver: nosy - IEEE 1394 traffic sniffer
This adds the traffic sniffer driver for Texas Instruments PCILynx/
PCILynx2 based cards. The use cases for nosy are analysis of
nonstandard protocols and as an aid in development of drivers,
applications, or firmwares.
Author of the driver is Kristian Høgsberg. Known contributers are
Jody McIntyre and Jonathan Woithe.
Nosy programs PCILynx chips to operate in promiscuous mode, which is a
feature that is not found in OHCI-1394 controllers. Hence, only special
hardware as mentioned in the Kconfig help text is suitable for nosy.
This is only the kernelspace part of nosy. There is a userspace
interface to it, called nosy-dump, proposed to be added into the tools/
subdirectory of the kernel sources in a subsequent change. Kernelspace
and userspave component of nosy communicate via a 'misc' character
device file called /dev/nosy with a simple ioctl() and read() based
protocol, as described by nosy-user.h.
The files added here are taken from
git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10)
with the following changes by Stefan Richter:
- Kconfig and Makefile hunks are written from scratch.
- Commented out version printk in nosy.c.
- Included missing <linux/sched.h>, reported by Stephen Rothwell.
"git shortlog nosy{-user.h,.c,.h}" from nosy's git repository:
Jonathan Woithe (2):
Nosy updates for recent kernels
Fix uninitialised memory (needed for 2.6.31 kernel)
Kristian Høgsberg (5):
Pull over nosy from mercurial repo.
Use a misc device instead.
Add simple AV/C decoder.
Don't break down on big payloads.
Set parent device for misc device.
As a low-level IEEE 1394 driver, its files are placed into
drivers/firewire/ although nosy is not part of the firewire driver
stack.
I am aware of the following literature from Texas Instruments about
PCILynx programming:
SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF
Functional Specification
SLLA023 - Initialization and Asynchronous Programming of the
TSB12LV21A 1394 Device
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 12:26:33 +04:00
To compile this driver as a module, say M here: The module will be
2010-07-22 13:58:05 +04:00
called nosy. Source code of a userspace interface to nosy, called
nosy-dump, can be found in tools/firewire/ of the kernel sources.
firewire: new driver: nosy - IEEE 1394 traffic sniffer
This adds the traffic sniffer driver for Texas Instruments PCILynx/
PCILynx2 based cards. The use cases for nosy are analysis of
nonstandard protocols and as an aid in development of drivers,
applications, or firmwares.
Author of the driver is Kristian Høgsberg. Known contributers are
Jody McIntyre and Jonathan Woithe.
Nosy programs PCILynx chips to operate in promiscuous mode, which is a
feature that is not found in OHCI-1394 controllers. Hence, only special
hardware as mentioned in the Kconfig help text is suitable for nosy.
This is only the kernelspace part of nosy. There is a userspace
interface to it, called nosy-dump, proposed to be added into the tools/
subdirectory of the kernel sources in a subsequent change. Kernelspace
and userspave component of nosy communicate via a 'misc' character
device file called /dev/nosy with a simple ioctl() and read() based
protocol, as described by nosy-user.h.
The files added here are taken from
git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10)
with the following changes by Stefan Richter:
- Kconfig and Makefile hunks are written from scratch.
- Commented out version printk in nosy.c.
- Included missing <linux/sched.h>, reported by Stephen Rothwell.
"git shortlog nosy{-user.h,.c,.h}" from nosy's git repository:
Jonathan Woithe (2):
Nosy updates for recent kernels
Fix uninitialised memory (needed for 2.6.31 kernel)
Kristian Høgsberg (5):
Pull over nosy from mercurial repo.
Use a misc device instead.
Add simple AV/C decoder.
Don't break down on big payloads.
Set parent device for misc device.
As a low-level IEEE 1394 driver, its files are placed into
drivers/firewire/ although nosy is not part of the firewire driver
stack.
I am aware of the following literature from Texas Instruments about
PCILynx programming:
SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF
Functional Specification
SLLA023 - Initialization and Asynchronous Programming of the
TSB12LV21A 1394 Device
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 12:26:33 +04:00
If unsure, say N.
2009-12-26 03:36:53 +03:00
endmenu
