iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath10k/mac.h

106 lines
3.8 KiB
C
Raw Normal View History

ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
ath10k: update copyright year Update year for Qualcomm Atheros, Inc. copyrights. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-22 18:31:13 +02:00
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _MAC_H_
#define _MAC_H_
#include <net/mac80211.h>
#include "core.h"
ath10k: fix shared WEP When static keys are used in shared WEP, when a station is associated, message 3 is sent with an encrypted payload. But, for subsequent authentications that are triggered without a deauth, the auth frame is decrypted by the HW. To handle this, check if the WEP keys have already been set for the peer and if so, mark the frame as decrypted. This scenario can happen when a station changes its default TX key and initiates a new authentication sequence. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-25 11:46:58 +05:30
#define WEP_KEYID_SHIFT 6
ath10k: implement tx pause wmi event qca6174 wmi-tlv firmware defines a new wmi event for host tx pausing (i.e. stop/wake tx queues). Map these events to ath10k/mac80211 tx queue control. This is important for multi-channel throughput performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-31 10:26:24 +00:00
enum wmi_tlv_tx_pause_id;
enum wmi_tlv_tx_pause_action;
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
struct ath10k_generic_iter {
struct ath10k *ar;
int ret;
};
ath10k: unify tx mode and dispatch There are a few different tx paths depending on firmware and frame itself. Creating a uniform decision will make it possible to switch between different txmode easier, both for testing and for future features as well. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:51:51 +03:00
struct rfc1042_hdr {
u8 llc_dsap;
u8 llc_ssap;
u8 llc_ctrl;
u8 snap_oui[3];
__be16 snap_type;
} __packed;
ath10k: embed ar_pci inside ar Use the common convention of embedding private structures inside parent structures. This reduces allocations and simplifies pci probing code. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-07 11:03:27 +02:00
struct ath10k *ath10k_mac_create(size_t priv_size);
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
void ath10k_mac_destroy(struct ath10k *ar);
int ath10k_mac_register(struct ath10k *ar);
void ath10k_mac_unregister(struct ath10k *ar);
struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id);
ath10k: introduce a stricter scan state machine This aims at fixing some rare scan bugs related to firmware reporting unexpected scan event sequences. One such bug was if spectral scan phyerr reporting prevented firmware from properly propagating scan events to host. This led to scan timeout. After that next scan would trigger scan completed event first (before scan started event) leading to ar->scan.in_progress and timeout timer states to be overwritten incorrectly and making the very next scan to hang forever. Reported-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-08-05 14:54:44 +02:00
void __ath10k_scan_finish(struct ath10k *ar);
void ath10k_scan_finish(struct ath10k *ar);
void ath10k_scan_timeout_work(struct work_struct *work);
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
void ath10k_offchan_tx_purge(struct ath10k *ar);
void ath10k_offchan_tx_work(struct work_struct *work);
ath10k: bring back the WMI path for mgmt frames This is still the only way to submit mgmt frames in case of 10.X firmware. This patch introduces wmi_mgmt_tx queue, because of the fact WMI command can block. This is a problem for ath10k_tx_htt(), since it's called from atomic context. The skb queue and worker are introduced to move the mgmt frame handling out of .tx callback context and not block. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-09-26 17:47:12 +02:00
void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar);
void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work);
ath10k: implement device recovery Restart the hardware if FW crashes. If FW crashes during recovery we leave the hardware in a "wedged" state to avoid recursive recoveries. When in "wedged" state userspace may bring interfaces down (to issue stop()) and then bring one interface (to issue start()) to reload hardware manually. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-07-16 09:54:35 +02:00
void ath10k_halt(struct ath10k *ar);
ath10k: workaround fw beaconing bug Some firmware revisions don't wait for beacon tx completion before sending another SWBA event. This could lead to hardware using old (freed) beacon data in some cases, e.g. tx credit starvation combined with missed TBTT. This is very very rare. On non-IOMMU-enabled hosts this could be a possible security issue because hw could beacon some random data on the air. On IOMMU-enabled hosts DMAR faults would occur in most cases and target device would crash. Since there are no beacon tx completions (implicit nor explicit) propagated to host the only workaround for this is to allocate a DMA-coherent buffer for a lifetime of a vif and use it for all beacon tx commands. Worst case for this approach is some beacons may become corrupted, e.g. garbled IEs or out-of-date TIM bitmap. Keep the original beacon-related code as-is in case future firmware revisions solve this problem so that the old path can be easily re-enabled with a fw_feature flag. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-09-18 11:18:02 +03:00
void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif);
ath10k: speed up hw recovery In some cases hw recovery was taking an absurdly long time due to ath10k waiting for things that would never really complete. Instead of waiting for inevitable timeouts poke all completions and wakequeues and check if it's still worth waiting. Reading/writing ar->state requires conf_mutex. Since waiters might be holding it introduce a new flag CRASH_FLUSH so it's possible to tell waiters to abort whatever they were waiting for. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-10-28 10:34:38 +01:00
void ath10k_drain_tx(struct ath10k *ar);
ath10k: fix shared WEP When static keys are used in shared WEP, when a station is associated, message 3 is sent with an encrypted payload. But, for subsequent authentications that are triggered without a deauth, the auth frame is decrypted by the HW. To handle this, check if the WEP keys have already been set for the peer and if so, mark the frame as decrypted. This scenario can happen when a station changes its default TX key and initiates a new authentication sequence. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-25 11:46:58 +05:30
bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr,
u8 keyidx);
ath10k: implement chanctx API The chanctx API will allow ath10k to support multi-channel operation. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-31 10:26:21 +00:00
int ath10k_mac_vif_chan(struct ieee80211_vif *vif,
struct cfg80211_chan_def *def);
ath10k: implement tx pause wmi event qca6174 wmi-tlv firmware defines a new wmi event for host tx pausing (i.e. stop/wake tx queues). Map these events to ath10k/mac80211 tx queue control. This is important for multi-channel throughput performance. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-31 10:26:24 +00:00
ath10k: add hw connection monitor support Some firmware revisions (e.g. qca6174 with fw73) don't deliver beacons to host reliably. This causes random disconnects even in perfect conditions. This is most visible with multi-channel operation. All available firmware revisions seem to support beacon miss offloading so there shouldn't be any problems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-10 16:22:01 +02:00
void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb);
void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id);
ath10k: fix per-vif queue locking Whenever any vdev was supposed to be paused all Tx queues were stopped (except offchannel) instead of only these associated with the given vdev. This caused subtle issues with multi-channel/multi-vif scenarios, e.g. authentication of station vif could sometimes fail depending on fw tx pause request timing. Fixes: b4aa539dd8f2 ("ath10k: implement tx pause wmi event") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-09 13:08:38 +02:00
void ath10k_mac_handle_tx_pause_vdev(struct ath10k *ar, u32 vdev_id,
enum wmi_tlv_tx_pause_id pause_id,
enum wmi_tlv_tx_pause_action action);
ath10k: deduplicate bitrate to rate idx conversion It's possible to derive rate index from bitrate without any additional mapping structures/logic. This should have little to none impact on performance since this is only done for management frames and the previous approach wasn't particularly optimized. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:51:56 +03:00
ath10k: rework legacy rx rate decoding Instead of using a hacky table and magic values use supported band information advertised to mac80211. This may impact performance a little when dealing with legacy rx rates depending on system architecture. It's probably negligible. This also fixes a highly theoretical corner case when HT/VHT rates weren't reported correctly if channel frequency wasn't known. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:51:56 +03:00
u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
ath10k: fix the wrong RX rate idx report at 11G mode The RX rate idx is not correct for 11G mode OFDM packet. Because the bitrate table start with CCK index instead of OFDM. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12 10:36:10 -08:00
u8 hw_rate, bool cck);
ath10k: deduplicate bitrate to rate idx conversion It's possible to derive rate index from bitrate without any additional mapping structures/logic. This should have little to none impact on performance since this is only done for management frames and the previous approach wasn't particularly optimized. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:51:56 +03:00
u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
u32 bitrate);
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
ath10k: rework tx queue locking Tx queue locking was very simple until now. Multi-channel support will require a more flexible and fine grained control. This introduces a per-hw and per-vif (each with a bitmask of reasons) tx queue locking. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-31 10:26:23 +00:00
void ath10k_mac_tx_lock(struct ath10k *ar, int reason);
void ath10k_mac_tx_unlock(struct ath10k *ar, int reason);
void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason);
void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif, int reason);
ath10k: fix peerid configuration in htt tx desc for htt version < 3.4 Of a word in struct htt_data_tx_desc htt version >= 3.4 firmware uses LSB 16-bit for frequency configuration which is used for offchannel tx and MSB 16-bit is for peerid. But other firmwares using version 2.X (10.1, 10.2.2, 10.2.4 and 10.4) are using 32-bit for peerid in htt tx desc. So far no issue is found with the existing code setting peerid and freq for HTT version 2.X, this could be mainly because of 0 as frequecy (home channel) is being always passed with those firmwares. There may be issues when non-zero freq is passed with firmware using < 3.4 htt version. To be safe use target_version_major and target_version_minor along with htt-op-version before configuring peer id and freq in htt tx desc. This patch extends ath10k_mac_tx_frm_has_freq() to check for htt_op_version_tlv and uses the helper while setting peerid in htt_tx_desc. Fixes: 8d6d36243610 ("ath10k: fix offchan reliability") Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-05 11:34:00 +05:30
bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar);
ath10k: implement wake_tx_queue This implements very basic support for software queueing. It also contains some knobs that will be patched later. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-06 16:14:34 +02:00
void ath10k_mac_tx_push_pending(struct ath10k *ar);
ath10k: implement push-pull tx The current/old tx path design was that host, at its own leisure, pushed tx frames to the device. For HTT there was ~1000-1400 msdu queue depth. After reaching that limit the driver would request mac80211 to stop queues. There was little control over what packets got in there as far as DA/RA was considered so it was rather easy to starve per-station traffic flows. With MU-MIMO this became a significant problem because the queue depth was insufficient to buffer frames from multiple clients (which could have different signal quality and capabilities) in an efficient fashion. Hence the new tx path in 10.4 was introduced: a pull-push mode. Firmware and host can share tx queue state via DMA. The state is logically a 2 dimensional array addressed via peer_id+tid pair. Each entry is a counter (either number of bytes or packets. Host keeps it updated and firmware uses it for scheduling Tx pull requests to host. This allows MU-MIMO to become a lot more effective with 10+ clients. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-06 16:14:43 +02:00
int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw,
struct ieee80211_txq *txq);
struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar,
u16 peer_id,
u8 tid);
ath10k: add dynamic tx mode switch config support for qca4019 push-pull mode needs certain amount the host driver involvement for managing queues in the host memory and packet delivery to firmware. qca4019 wifi firmware has an option to stay in push mode for less number of active traffic flow and then switch to push-pull mode when the active traffic flow goes beyond the certain limit. The advantage of staying in push mode for less active traffic is, the host cpu consumption is reduced. qca4019 firmware supports this flexibility of the mode switch. It takes the host driver interest (LOW_PERF/HIGH_PERF) via WMI_EXT_RESOURCE_CFG_CMDID, LOW_PERF - fw would stay in push mode and switch to push-pull based on demand. HIGH_PERF - fw would stay in push-pull mode from the boot. To make this configuration generic, new WMI services WMI_SERVICE_TX_MODE_PUSH_ONLY, WMI_SERVICE_TX_MODE_PUSH_PULL, WMI_SERVICE_TX_MODE_DYNAMIC are introduced to take dynamic tx mode switch support availability in firmware. Based on WMI_SERVICE_TX_MODE_DYNAMIC, LOW_PERF or HIGHT_PERF is configured to the firmware. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12 20:15:53 +05:30
int ath10k_mac_ext_resource_config(struct ath10k *ar, u32 val);
ath10k: add waiting htt tx complete before wow enable If there are some tx packets pending in firmware, and then system enters suspend, firmware will fail for wow enable. This will trigger mac80211 to stop ath10k and download firmware again, then it is non-wow suspend. After add the waiting htt tx complete, then firmware will have some time window to send or flush the pending tx packets. Tested with QCA6174 PCI with firmware WLAN.RM.4.4.1-00109-QCARMSWPZ-1, but this will also affect QCA9377 PCI. It's not a regression with new firmware releases. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-08-28 19:48:42 +03:00
void ath10k_mac_wait_tx_complete(struct ath10k *ar);
ath10k: rework tx queue locking Tx queue locking was very simple until now. Multi-channel support will require a more flexible and fine grained control. This introduces a per-hw and per-vif (each with a bitmask of reasons) tx queue locking. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-31 10:26:23 +00:00
ath10k: simplify tx helpers It always bugged me how tid is computed and stored in a temporary var before written to the control buffer. It was confusing and it made it difficult to work with tx helpers. While at it rename the qos workaround function as it was misleading - it's not a workaround but preparation for nwifi tx mode. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-07-21 21:03:09 +03:00
static inline void ath10k_tx_h_seq_no(struct ieee80211_vif *vif,
struct sk_buff *skb)
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
ath10k: remove ath10k_vif_to_arvif() it adds unnecessary level of indirection, while we just access structure field Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-02-13 12:38:37 +02:00
struct ath10k_vif *arvif = (void *)vif->drv_priv;
ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices Here's a new mac80211 driver for Qualcomm Atheros 802.11ac QCA98xx devices. A major difference from ath9k is that there's now a firmware and that's why we had to implement a new driver. The wiki page for the driver is: http://wireless.kernel.org/en/users/Drivers/ath10k The driver has had many authors, they are listed here alphabetically: Bartosz Markowski <bartosz.markowski@tieto.com> Janusz Dziedzic <janusz.dziedzic@tieto.com> Kalle Valo <kvalo@qca.qualcomm.com> Marek Kwaczynski <marek.kwaczynski@tieto.com> Marek Puzyniak <marek.puzyniak@tieto.com> Michal Kazior <michal.kazior@tieto.com> Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2013-06-12 20:52:10 +03:00
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
if (arvif->tx_seq_no == 0)
arvif->tx_seq_no = 0x1000;
if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
arvif->tx_seq_no += 0x10;
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
hdr->seq_ctrl |= cpu_to_le16(arvif->tx_seq_no);
}
}
#endif /* _MAC_H_ */
Reference in New Issue Copy Permalink