iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5d512fcdf6
linux/drivers/video/exynos/exynos_dp_core.h

204 lines
7.9 KiB
C
Raw Normal View History

video: support DP controller driver Samsung EXYNOS SoC such Exynos5 has DP controller and embedded DP panel can be used. This patch supports DP driver based on Samsung EXYNOS SoC chip. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-03 13:01:55 +04:00
/*
* Header file for Samsung DP (Display Port) interface driver.
*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _EXYNOS_DP_CORE_H
#define _EXYNOS_DP_CORE_H
struct link_train {
int eq_loop;
int cr_loop[4];
u8 link_rate;
u8 lane_count;
u8 training_lane[4];
enum link_training_state lt_state;
};
struct exynos_dp_device {
struct device *dev;
struct clk *clock;
unsigned int irq;
void __iomem *reg_base;
struct video_info *video_info;
struct link_train link_train;
};
/* exynos_dp_reg.c */
void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable);
void exynos_dp_stop_video(struct exynos_dp_device *dp);
void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
video: exynos_dp: add analog and pll control setting This patch adds analog and pll control setting. This control setting is used for DP TX PHY block to set the values as below. It is beneficial to improve analog characteristics. - TX terminal registor is 50 Ohm. - Reference clock of PHY is 24 MHz. - Power source for TX digital logic is 1.0625 V. - Power source for internal clock driver is 1.0625 V. - PLL VCO range setting is 600 uA. - Power down ring osc is turned off. - AUX terminal resistor is 50 Ohm. - AUX channel current is 8 mA and multiplied by 2. - TX channel output amplitude is 400 mV. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-04-16 04:33:12 +04:00
void exynos_dp_init_analog_param(struct exynos_dp_device *dp);
video: support DP controller driver Samsung EXYNOS SoC such Exynos5 has DP controller and embedded DP panel can be used. This patch supports DP driver based on Samsung EXYNOS SoC chip. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-03 13:01:55 +04:00
void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
void exynos_dp_reset(struct exynos_dp_device *dp);
video: exynos_dp: move sw reset prioir to enabling sw defined function The sw reset should be called prioir to enabling sw defined function, according to datasheet. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-05-25 11:21:08 +04:00
void exynos_dp_swreset(struct exynos_dp_device *dp);
video: support DP controller driver Samsung EXYNOS SoC such Exynos5 has DP controller and embedded DP panel can be used. This patch supports DP driver based on Samsung EXYNOS SoC chip. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-02-03 13:01:55 +04:00
void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
u32 exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp);
void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable);
void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
enum analog_power_block block,
bool enable);
void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
void exynos_dp_init_hpd(struct exynos_dp_device *dp);
void exynos_dp_reset_aux(struct exynos_dp_device *dp);
void exynos_dp_init_aux(struct exynos_dp_device *dp);
int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
unsigned int reg_addr,
unsigned char data);
int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
unsigned int reg_addr,
unsigned char *data);
int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
unsigned int reg_addr,
unsigned int count,
unsigned char data[]);
int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
unsigned int reg_addr,
unsigned int count,
unsigned char data[]);
int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
unsigned int device_addr,
unsigned int reg_addr);
int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
unsigned int device_addr,
unsigned int reg_addr,
unsigned int *data);
int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
unsigned int device_addr,
unsigned int reg_addr,
unsigned int count,
unsigned char edid[]);
void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable);
void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
enum pattern_set pattern);
void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
u32 training_lane);
void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
u32 training_lane);
void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
u32 training_lane);
void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
u32 training_lane);
u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
void exynos_dp_reset_macro(struct exynos_dp_device *dp);
int exynos_dp_init_video(struct exynos_dp_device *dp);
void exynos_dp_set_video_color_format(struct exynos_dp_device *dp,
u32 color_depth,
u32 color_space,
u32 dynamic_range,
u32 ycbcr_coeff);
int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
enum clock_recovery_m_value_type type,
u32 m_value,
u32 n_value);
void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
void exynos_dp_start_video(struct exynos_dp_device *dp);
int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
struct video_info *video_info);
void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
/* I2C EDID Chip ID, Slave Address */
#define I2C_EDID_DEVICE_ADDR 0x50
#define I2C_E_EDID_DEVICE_ADDR 0x30
#define EDID_BLOCK_LENGTH 0x80
#define EDID_HEADER_PATTERN 0x00
#define EDID_EXTENSION_FLAG 0x7e
#define EDID_CHECKSUM 0x7f
/* Definition for DPCD Register */
#define DPCD_ADDR_DPCD_REV 0x0000
#define DPCD_ADDR_MAX_LINK_RATE 0x0001
#define DPCD_ADDR_MAX_LANE_COUNT 0x0002
#define DPCD_ADDR_LINK_BW_SET 0x0100
#define DPCD_ADDR_LANE_COUNT_SET 0x0101
#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102
#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103
#define DPCD_ADDR_LANE0_1_STATUS 0x0202
#define DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED 0x0204
#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206
#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207
#define DPCD_ADDR_TEST_REQUEST 0x0218
#define DPCD_ADDR_TEST_RESPONSE 0x0260
#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261
#define DPCD_ADDR_SINK_POWER_STATE 0x0600
/* DPCD_ADDR_MAX_LANE_COUNT */
#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
/* DPCD_ADDR_LANE_COUNT_SET */
#define DPCD_ENHANCED_FRAME_EN (0x1 << 7)
#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
/* DPCD_ADDR_TRAINING_PATTERN_SET */
#define DPCD_SCRAMBLING_DISABLED (0x1 << 5)
#define DPCD_SCRAMBLING_ENABLED (0x0 << 5)
#define DPCD_TRAINING_PATTERN_2 (0x2 << 0)
#define DPCD_TRAINING_PATTERN_1 (0x1 << 0)
#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0)
/* DPCD_ADDR_TRAINING_LANE0_SET */
#define DPCD_MAX_PRE_EMPHASIS_REACHED (0x1 << 5)
#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 (0x0 << 3)
#define DPCD_MAX_SWING_REACHED (0x1 << 2)
#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0 (0x0 << 0)
/* DPCD_ADDR_LANE0_1_STATUS */
#define DPCD_LANE_SYMBOL_LOCKED (0x1 << 2)
#define DPCD_LANE_CHANNEL_EQ_DONE (0x1 << 1)
#define DPCD_LANE_CR_DONE (0x1 << 0)
#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE| \
DPCD_LANE_CHANNEL_EQ_DONE|\
DPCD_LANE_SYMBOL_LOCKED)
/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */
#define DPCD_LINK_STATUS_UPDATED (0x1 << 7)
#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6)
#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0)
/* DPCD_ADDR_TEST_REQUEST */
#define DPCD_TEST_EDID_READ (0x1 << 2)
/* DPCD_ADDR_TEST_RESPONSE */
#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2)
/* DPCD_ADDR_SINK_POWER_STATE */
#define DPCD_SET_POWER_STATE_D0 (0x1 << 0)
#define DPCD_SET_POWER_STATE_D4 (0x2 << 0)
#endif /* _EXYNOS_DP_CORE_H */
Reference in New Issue Copy Permalink