iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
5dbd04eddb
linux/drivers/perf/Kconfig

238 lines
7.2 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 15:07:45 +03:00
# SPDX-License-Identifier: GPL-2.0-only
arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-06 14:23:53 +03:00
#
# Performance Monitor Drivers
#
menu "Performance monitor support"
drivers/perf: commonise PERF_EVENTS dependency All PMU drivers are going to depend on PERF_EVENTS, so let's make this dependency common and simplify the individual Kconfig entries. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-13 15:45:51 +03:00
depends on PERF_EVENTS
arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-06 14:23:53 +03:00
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
config ARM_CCI_PMU
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
tristate "ARM CCI PMU driver"
depends on (ARM && CPU_V7) || ARM64
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
select ARM_CCI
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
help
Support for PMU events monitoring on the ARM CCI (Cache Coherent
Interconnect) family of products.
If compiled as a module, it will be called arm-cci.
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
config ARM_CCI400_PMU
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
bool "support CCI-400"
default y
depends on ARM_CCI_PMU
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
select ARM_CCI400_COMMON
help
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
CCI-400 provides 4 independent event counters counting events related
to the connected slave/master interfaces, plus a cycle counter.
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
config ARM_CCI5xx_PMU
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
bool "support CCI-500/CCI-550"
default y
depends on ARM_CCI_PMU
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
help
perf/arm-cci: Allow building as a module Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-14 16:34:53 +03:00
CCI-500/CCI-550 both provide 8 independent event counters, which can
count events pertaining to the slave/master interfaces as well as the
internal events to the CCI.
drivers/bus: Split Arm CCI driver The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:42 +03:00
drivers/bus: Move Arm CCN PMU driver The arm-ccn driver is purely a perf driver for the CCN PMU, not a bus driver in the sense of the other residents of drivers/bus/, so let's move it to the appropriate place for SoC PMU drivers. Not to mention moving the documentation accordingly as well. Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:41 +03:00
config ARM_CCN
tristate "ARM CCN driver support"
drivers/perf: Improve build test coverage Improve build test cover by allowing some drivers to build under COMPILE_TEST where possible. Some notes: - Mostly a dependency on CONFIG_ACPI is not really required for only building (but left untouched), but is required for TX2 which uses ACPI functions which have no stubs - XGENE required 64b dependency as it relies on some unsigned long perf struct fields being 64b - I don't see why TX2 requires NUMA to build, but left untouched - Added an explicit dependency on GENERIC_MSI_IRQ_DOMAIN for ARM_SMMU_V3_PMU, which is required for platform MSI functions Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633085326-156653-3-git-send-email-john.garry@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-01 13:48:46 +03:00
depends on ARM || ARM64 || COMPILE_TEST
drivers/bus: Move Arm CCN PMU driver The arm-ccn driver is purely a perf driver for the CCN PMU, not a bus driver in the sense of the other residents of drivers/bus/, so let's move it to the appropriate place for SoC PMU drivers. Not to mention moving the documentation accordingly as well. Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-15 21:51:41 +03:00
help
PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
interconnect.
perf: Add Arm CMN-600 PMU driver Initial driver for PMU event counting on the Arm CMN-600 interconnect. CMN sports an obnoxiously complex distributed PMU system as part of its debug and trace features, which can do all manner of things like sampling, cross-triggering and generating CoreSight trace. This driver covers the PMU functionality, plus the relevant aspects of watchpoints for simply counting matching flits. Tested-by: Tsahi Zidenberg <tsahee@amazon.com> Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 16:28:38 +03:00
config ARM_CMN
tristate "Arm CMN-600 PMU support"
perf/arm-cmn: Drop compile-test restriction Although CMN is currently (and overwhelmingly likely to remain) deployed in arm64-only (modulo userspace) systems, the 64-bit "dependency" for compile-testing was just laziness due to heavy reliance on readq/writeq accessors. Since we only need one extra include for robustness in that regard, let's pull that in, widen the compile-test coverage, and fix up the smattering of type laziness that that brings to light. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/baee9ee0d0bdad8aaeb70f5a4b98d8fd4b1f5786.1638530442.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-12-03 14:44:52 +03:00
depends on ARM64 || COMPILE_TEST
perf: Add Arm CMN-600 PMU driver Initial driver for PMU event counting on the Arm CMN-600 interconnect. CMN sports an obnoxiously complex distributed PMU system as part of its debug and trace features, which can do all manner of things like sampling, cross-triggering and generating CoreSight trace. This driver covers the PMU functionality, plus the relevant aspects of watchpoints for simply counting matching flits. Tested-by: Tsahi Zidenberg <tsahee@amazon.com> Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 16:28:38 +03:00
help
Support for PMU events monitoring on the Arm CMN-600 Coherent Mesh
Network interconnect.
arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-06 14:23:53 +03:00
config ARM_PMU
drivers/perf: commonise PERF_EVENTS dependency All PMU drivers are going to depend on PERF_EVENTS, so let's make this dependency common and simplify the individual Kconfig entries. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-13 15:45:51 +03:00
depends on ARM || ARM64
arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-06 14:23:53 +03:00
bool "ARM PMU framework"
default y
help
Say y if you want to use CPU performance monitors on ARM-based
systems.
RISC-V: Add a perf core library for pmu drivers Implement a perf core library that can support all the essential perf features in future. It can also accommodate any type of PMU implementation in future. Currently, both SBI based perf driver and legacy driver implemented uses the library. Most of the common perf functionalities are kept in this core library wile PMU specific driver can implement PMU specific features. For example, the SBI specific functionality will be implemented in the SBI specific driver. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-19 03:46:54 +03:00
config RISCV_PMU
depends on RISCV
bool "RISC-V PMU framework"
default y
help
Say y if you want to use CPU performance monitors on RISCV-based
systems. This provides the core PMU framework that abstracts common
PMU functionalities in a core library so that different PMU drivers
can reuse it.
RISC-V: Add a simple platform driver for RISC-V legacy perf The old RISC-V perf implementation allowed counting of only cycle/instruction counters using perf. Restore that feature by implementing a simple platform driver under a separate config to provide backward compatibility. Any existing software stack will continue to work as it is. However, it provides an easy way out in future where we can remove the legacy driver. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-19 03:46:55 +03:00
config RISCV_PMU_LEGACY
depends on RISCV_PMU
bool "RISC-V legacy PMU implementation"
default y
help
Say y if you want to use the legacy CPU performance monitor
implementation on RISC-V based systems. This only allows counting
of cycle/instruction counter and doesn't support counter overflow,
or programmable counters. It will be removed in future.
RISC-V: Add perf platform driver based on SBI PMU extension RISC-V SBI specification added a PMU extension that allows to configure start/stop any pmu counter. The RISC-V perf can use most of the generic perf features except interrupt overflow and event filtering based on privilege mode which will be added in future. It also allows to monitor a handful of firmware counters that can provide insights into firmware activity during a performance analysis. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-19 03:46:57 +03:00
config RISCV_PMU_SBI
depends on RISCV_PMU && RISCV_SBI
bool "RISC-V PMU based on SBI PMU extension"
default y
help
Say y if you want to use the CPU performance monitor
using SBI PMU extension on RISC-V based systems. This option provides
full perf feature support i.e. counter overflow, privilege mode
filtering, counter configuration.
drivers/perf: arm_pmu: add ACPI framework This patch adds framework code to handle parsing PMU data out of the MADT, sanity checking this, and managing the association of CPUs (and their interrupts) with appropriate logical PMUs. For the time being, we expect that only one PMU driver (PMUv3) will make use of this, and we simply pass in a single probe function. This is based on an earlier patch from Jeremy Linton. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Jeremy Linton <jeremy.linton@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-11 11:39:55 +03:00
config ARM_PMU_ACPI
depends on ARM_PMU && ACPI
def_bool y
perf/smmuv3: Add arm64 smmuv3 pmu driver Adds a new driver to support the SMMUv3 PMU and add it into the perf events framework. Each SMMU node may have multiple PMUs associated with it, each of which may support different events. SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page> where <phys_addr_page> is the physical page address of the SMMU PMCG wrapped to 4K boundary. For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840 Filtering by stream id is done by specifying filtering parameters with the event. options are: filter_enable - 0 = no filtering, 1 = filtering enabled filter_span - 0 = exact match, 1 = pattern match filter_stream_id - pattern to filter against Example: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1, filter_span=1,filter_stream_id=0x42/ -a netperf Applies filter pattern 0x42 to transaction events, which means events matching stream ids 0x42 & 0x43 are counted as only upper StreamID bits are required to match the given filter. Further filtering information is available in the SMMU documentation. SMMU events are not attributable to a CPU, so task mode and sampling are not supported. Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> [will: fold in review feedback from Robin] [will: rewrite Kconfig text and allow building as a module] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-26 18:17:51 +03:00
config ARM_SMMU_V3_PMU
tristate "ARM SMMUv3 Performance Monitors Extension"
perf/smmuv3: Remove build dependency on ACPI This driver supports working without ACPI since commit 3f7be43561766 ("perf/smmuv3: Add devicetree support"), so remove the build dependency. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20230706-smmuv3-pmu-noacpi-v1-1-7083ef189158@axis.com Signed-off-by: Will Deacon <will@kernel.org>
2023-07-06 12:23:05 +03:00
depends on ARM64 || (COMPILE_TEST && 64BIT)
genirq: Get rid of GENERIC_MSI_IRQ_DOMAIN Adjust to reality and remove another layer of pointless Kconfig indirection. CONFIG_GENERIC_MSI_IRQ is good enough to serve all purposes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20221111122014.524842979@linutronix.de
2022-11-11 16:54:40 +03:00
depends on GENERIC_MSI_IRQ
perf/smmuv3: Add arm64 smmuv3 pmu driver Adds a new driver to support the SMMUv3 PMU and add it into the perf events framework. Each SMMU node may have multiple PMUs associated with it, each of which may support different events. SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page> where <phys_addr_page> is the physical page address of the SMMU PMCG wrapped to 4K boundary. For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840 Filtering by stream id is done by specifying filtering parameters with the event. options are: filter_enable - 0 = no filtering, 1 = filtering enabled filter_span - 0 = exact match, 1 = pattern match filter_stream_id - pattern to filter against Example: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1, filter_span=1,filter_stream_id=0x42/ -a netperf Applies filter pattern 0x42 to transaction events, which means events matching stream ids 0x42 & 0x43 are counted as only upper StreamID bits are required to match the given filter. Further filtering information is available in the SMMU documentation. SMMU events are not attributable to a CPU, so task mode and sampling are not supported. Signed-off-by: Neil Leeder <nleeder@codeaurora.org> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> [will: fold in review feedback from Robin] [will: rewrite Kconfig text and allow building as a module] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-26 18:17:51 +03:00
help
Provides support for the ARM SMMUv3 Performance Monitor Counter
Groups (PMCG), which provide monitoring of transactions passing
through the SMMU and allow the resulting information to be filtered
based on the Stream ID of the corresponding master.
arm64: perf: Move PMUv3 driver to drivers/perf Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting in the way of being able to use perf on ARMv8 cores running a 32bit kernel, such as 32bit KVM guests. This patch moves it into drivers/perf/arm_pmuv3.c, with an include file in include/linux/perf/arm_pmuv3.h. The only thing left in arch/arm64 is some mundane perf stuff. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Zaid Al-Bassam <zalbassam@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-03-17 22:50:20 +03:00
config ARM_PMUV3
ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM The only thing stopping the PMUv3 driver from compiling on 32bit is the lack of defined system registers names and the handful of required helpers. This is easily solved by providing the sysreg accessors and updating the Kconfig entry. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Co-developed-by: Zaid Al-Bassam <zalbassam@google.com> Signed-off-by: Zaid Al-Bassam <zalbassam@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230317195027.3746949-8-zalbassam@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-03-17 22:50:26 +03:00
depends on HW_PERF_EVENTS && ((ARM && CPU_V7) || ARM64)
arm64: perf: Move PMUv3 driver to drivers/perf Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting in the way of being able to use perf on ARMv8 cores running a 32bit kernel, such as 32bit KVM guests. This patch moves it into drivers/perf/arm_pmuv3.c, with an include file in include/linux/perf/arm_pmuv3.h. The only thing left in arch/arm64 is some mundane perf stuff. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Zaid Al-Bassam <zalbassam@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-03-17 22:50:20 +03:00
bool "ARM PMUv3 support" if !ARM64
ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM The only thing stopping the PMUv3 driver from compiling on 32bit is the lack of defined system registers names and the handful of required helpers. This is easily solved by providing the sysreg accessors and updating the Kconfig entry. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Co-developed-by: Zaid Al-Bassam <zalbassam@google.com> Signed-off-by: Zaid Al-Bassam <zalbassam@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230317195027.3746949-8-zalbassam@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-03-17 22:50:26 +03:00
default ARM64
arm64: perf: Move PMUv3 driver to drivers/perf Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting in the way of being able to use perf on ARMv8 cores running a 32bit kernel, such as 32bit KVM guests. This patch moves it into drivers/perf/arm_pmuv3.c, with an include file in include/linux/perf/arm_pmuv3.h. The only thing left in arch/arm64 is some mundane perf stuff. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Zaid Al-Bassam <zalbassam@google.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-03-17 22:50:20 +03:00
help
Say y if you want to use the ARM performance monitor unit (PMU)
version 3. The PMUv3 is the CPU performance monitors on ARMv8
(aarch32 and aarch64) systems that implement the PMUv3
architecture.
perf: ARM DynamIQ Shared Unit PMU support Add support for the Cluster PMU part of the ARM DynamIQ Shared Unit (DSU). The DSU integrates one or more cores with an L3 memory system, control logic, and external interfaces to form a multicore cluster. The PMU allows counting the various events related to L3, SCU etc, along with providing a cycle counter. The PMU can be accessed via system registers, which are common to the cores in the same cluster. The PMU registers follow the semantics of the ARMv8 PMU, mostly, with the exception that the counters record the cluster wide events. This driver is mostly based on the ARMv8 and CCI PMU drivers. The driver only supports ARM64 at the moment. It can be extended to support ARM32 by providing register accessors like we do in arch/arm64/include/arm_dsu_pmu.h. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-01-02 14:25:33 +03:00
config ARM_DSU_PMU
tristate "ARM DynamIQ Shared Unit (DSU) PMU"
depends on ARM64
help
Provides support for performance monitor unit in ARM DynamIQ Shared
Unit (DSU). The DSU integrates one or more cores with an L3 memory
system, control logic. The PMU allows counting various events related
to DSU.
drivers/perf: imx_ddr: Add DDR performance counter support to perf Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-01 21:43:29 +03:00
config FSL_IMX8_DDR_PMU
tristate "Freescale i.MX8 DDR perf monitor"
drivers/perf: Improve build test coverage Improve build test cover by allowing some drivers to build under COMPILE_TEST where possible. Some notes: - Mostly a dependency on CONFIG_ACPI is not really required for only building (but left untouched), but is required for TX2 which uses ACPI functions which have no stubs - XGENE required 64b dependency as it relies on some unsigned long perf struct fields being 64b - I don't see why TX2 requires NUMA to build, but left untouched - Added an explicit dependency on GENERIC_MSI_IRQ_DOMAIN for ARM_SMMU_V3_PMU, which is required for platform MSI functions Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633085326-156653-3-git-send-email-john.garry@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-01 13:48:46 +03:00
depends on ARCH_MXC || COMPILE_TEST
drivers/perf: imx_ddr: Add DDR performance counter support to perf Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-05-01 21:43:29 +03:00
help
Provides support for the DDR performance monitor in i.MX8, which
can give information about memory throughput and other related
events.
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver Add ddr performance monitor support for i.MX93. There are 11 counters for ddr performance events. - Counter 0 is a 64-bit counter that counts only clock cycles. - Counter 1-10 are 32-bit counters that can monitor counter-specific events in addition to counting reference events. For example: perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls Besides, this ddr pmu support AXI filter capability. It's implemented as counter-specific events. It now supports read transaction, write transaction and read beat events which corresponding respecitively to counter 2, 3 and 4. axi_mask and axi_id need to be as event parameters. For example: perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/ perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/ perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/ Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230418102910.2065651-1-xu.yang_2@nxp.com [will: Remove redundant error message on platform_get_irq() failure] Signed-off-by: Will Deacon <will@kernel.org>
2023-04-18 13:29:08 +03:00
config FSL_IMX9_DDR_PMU
tristate "Freescale i.MX9 DDR perf monitor"
depends on ARCH_MXC
help
Provides support for the DDR performance monitor in i.MX9, which
can give information about memory throughput and other related
events.
perf: add qcom l2 cache perf events driver Adds perf events support for L2 cache PMU. The L2 cache PMU driver is named 'l2cache_0' and can be used with perf events to profile L2 events such as cache hits and misses on Qualcomm Technologies processors. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> [will: minimise nesting in l2_cache_associate_cpu_with_cluster] [will: use kstrtoul for unsigned long, remove redunant .owner setting] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-07 21:14:04 +03:00
config QCOM_L2_PMU
bool "Qualcomm Technologies L2-cache PMU"
drivers/perf: commonise PERF_EVENTS dependency All PMU drivers are going to depend on PERF_EVENTS, so let's make this dependency common and simplify the individual Kconfig entries. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-13 15:45:51 +03:00
depends on ARCH_QCOM && ARM64 && ACPI
soc: qcom: Separate kryo l2 accessors from PMU driver The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-03 11:49:41 +03:00
select QCOM_KRYO_L2_ACCESSORS
perf: add qcom l2 cache perf events driver Adds perf events support for L2 cache PMU. The L2 cache PMU driver is named 'l2cache_0' and can be used with perf events to profile L2 events such as cache hits and misses on Qualcomm Technologies processors. Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Leeder <nleeder@codeaurora.org> [will: minimise nesting in l2_cache_associate_cpu_with_cluster] [will: use kstrtoul for unsigned long, remove redunant .owner setting] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-07 21:14:04 +03:00
help
Provides support for the L2 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
Adds the L2 cache PMU into the perf events subsystem for
monitoring L2 cache events.
perf: qcom: Add L3 cache PMU driver This adds a new dynamic PMU to the Perf Events framework to program and control the L3 cache PMUs in some Qualcomm Technologies SOCs. The driver supports a distributed cache architecture where the overall cache for a socket is comprised of multiple slices each with its own PMU. Access to each individual PMU is provided even though all CPUs share all the slices. User space needs to aggregate to individual counts to provide a global picture. The driver exports formatting and event information to sysfs so it can be used by the perf user space tools with the syntaxes: perf stat -a -e l3cache_0_0/read-miss/ perf stat -a -e l3cache_0_0/event=0x21/ Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> [will: fixed sparse issues] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-31 21:13:43 +03:00
config QCOM_L3_PMU
bool "Qualcomm Technologies L3-cache PMU"
drivers/perf: commonise PERF_EVENTS dependency All PMU drivers are going to depend on PERF_EVENTS, so let's make this dependency common and simplify the individual Kconfig entries. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-13 15:45:51 +03:00
depends on ARCH_QCOM && ARM64 && ACPI
perf: qcom: Add L3 cache PMU driver This adds a new dynamic PMU to the Perf Events framework to program and control the L3 cache PMUs in some Qualcomm Technologies SOCs. The driver supports a distributed cache architecture where the overall cache for a socket is comprised of multiple slices each with its own PMU. Access to each individual PMU is provided even though all CPUs share all the slices. User space needs to aggregate to individual counts to provide a global picture. The driver exports formatting and event information to sysfs so it can be used by the perf user space tools with the syntaxes: perf stat -a -e l3cache_0_0/read-miss/ perf stat -a -e l3cache_0_0/event=0x21/ Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> [will: fixed sparse issues] Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-31 21:13:43 +03:00
select QCOM_IRQ_COMBINER
help
Provides support for the L3 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
Adds the L3 cache PMU into the perf events subsystem for
monitoring L3 cache events.
drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver This patch adds a perf driver for the PMU UNCORE devices DDR4 Memory Controller(DMC) and Level 3 Cache(L3C). Each PMU supports up to 4 counters. All counters lack overflow interrupt and are sampled periodically. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [will: consistent enum cpuhp_state naming] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-06 14:51:31 +03:00
config THUNDERX2_PMU
tristate "Cavium ThunderX2 SoC PMU UNCORE"
drivers/perf: Improve build test coverage Improve build test cover by allowing some drivers to build under COMPILE_TEST where possible. Some notes: - Mostly a dependency on CONFIG_ACPI is not really required for only building (but left untouched), but is required for TX2 which uses ACPI functions which have no stubs - XGENE required 64b dependency as it relies on some unsigned long perf struct fields being 64b - I don't see why TX2 requires NUMA to build, but left untouched - Added an explicit dependency on GENERIC_MSI_IRQ_DOMAIN for ARM_SMMU_V3_PMU, which is required for platform MSI functions Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633085326-156653-3-git-send-email-john.garry@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-01 13:48:46 +03:00
depends on ARCH_THUNDER2 || COMPILE_TEST
depends on NUMA && ACPI
drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver This patch adds a perf driver for the PMU UNCORE devices DDR4 Memory Controller(DMC) and Level 3 Cache(L3C). Each PMU supports up to 4 counters. All counters lack overflow interrupt and are sampled periodically. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> [will: consistent enum cpuhp_state naming] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-12-06 14:51:31 +03:00
default m
help
Provides support for ThunderX2 UNCORE events.
The SoC has PMU support in its L3 cache controller (L3C) and
in the DDR4 Memory Controller (DMC).
perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver This patch adds a driver for the SoC-wide (AKA uncore) PMU hardware found in APM X-Gene SoCs. Signed-off-by: Tai Nguyen <ttnguyen@apm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2016-07-15 20:38:04 +03:00
config XGENE_PMU
drivers/perf: Improve build test coverage Improve build test cover by allowing some drivers to build under COMPILE_TEST where possible. Some notes: - Mostly a dependency on CONFIG_ACPI is not really required for only building (but left untouched), but is required for TX2 which uses ACPI functions which have no stubs - XGENE required 64b dependency as it relies on some unsigned long perf struct fields being 64b - I don't see why TX2 requires NUMA to build, but left untouched - Added an explicit dependency on GENERIC_MSI_IRQ_DOMAIN for ARM_SMMU_V3_PMU, which is required for platform MSI functions Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633085326-156653-3-git-send-email-john.garry@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2021-10-01 13:48:46 +03:00
depends on ARCH_XGENE || (COMPILE_TEST && 64BIT)
perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver This patch adds a driver for the SoC-wide (AKA uncore) PMU hardware found in APM X-Gene SoCs. Signed-off-by: Tai Nguyen <ttnguyen@apm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2016-07-15 20:38:04 +03:00
bool "APM X-Gene SoC PMU"
default n
help
Say y if you want to use APM X-Gene SoC performance monitors.
drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension The ARMv8.2 architecture introduces the optional Statistical Profiling Extension (SPE). SPE can be used to profile a population of operations in the CPU pipeline after instruction decode. These are either architected instructions (i.e. a dynamic instruction trace) or CPU-specific uops and the choice is fixed statically in the hardware and advertised to userspace via caps/. Sampling is controlled using a sampling interval, similar to a regular PMU counter, but also with an optional random perturbation to avoid falling into patterns where you continuously profile the same instruction in a hot loop. After each operation is decoded, the interval counter is decremented. When it hits zero, an operation is chosen for profiling and tracked within the pipeline until it retires. Along the way, information such as TLB lookups, cache misses, time spent to issue etc is captured in the form of a sample. The sample is then filtered according to certain criteria (e.g. load latency) that can be specified in the event config (described under format/) and, if the sample satisfies the filter, it is written out to memory as a record, otherwise it is discarded. Only one operation can be sampled at a time. The in-memory buffer is linear and virtually addressed, raising an interrupt when it fills up. The PMU driver handles these interrupts to give the appearance of a ring buffer, as expected by the AUX code. The in-memory trace-like format is self-describing (though not parseable in reverse) and written as a series of records, with each record corresponding to a sample and consisting of a sequence of packets. These packets are defined by the architecture, although some have CPU-specific fields for recording information specific to the microarchitecture. As a simple example, a record generated for a branch instruction may consist of the following packets: 0 (Address) : Virtual PC of the branch instruction 1 (Type) : Conditional direct branch 2 (Counter) : Number of cycles taken from Dispatch to Issue 3 (Address) : Virtual branch target + condition flags 4 (Counter) : Number of cycles taken from Dispatch to Complete 5 (Events) : Mispredicted as not-taken 6 (END) : End of record It is also possible to toggle properties such as timestamp packets in each record. This patch adds support for SPE in the form of a new perf driver. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-22 13:36:32 +03:00
config ARM_SPE_PMU
tristate "Enable support for the ARMv8.2 Statistical Profiling Extension"
drivers/perf: Remove ARM_SPE_PMU explicit PERF_EVENTS dependency Since commit bddb9b68d3fb ("drivers/perf: commonise PERF_EVENTS dependency"), all perf drivers depend on PERF_EVENTS config under a common menu. Config ARM_SPE_PMU still declares explicitly a dependency on PERF_EVENTS, which is unneeded, so remove it. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-22 18:54:04 +03:00
depends on ARM64
drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension The ARMv8.2 architecture introduces the optional Statistical Profiling Extension (SPE). SPE can be used to profile a population of operations in the CPU pipeline after instruction decode. These are either architected instructions (i.e. a dynamic instruction trace) or CPU-specific uops and the choice is fixed statically in the hardware and advertised to userspace via caps/. Sampling is controlled using a sampling interval, similar to a regular PMU counter, but also with an optional random perturbation to avoid falling into patterns where you continuously profile the same instruction in a hot loop. After each operation is decoded, the interval counter is decremented. When it hits zero, an operation is chosen for profiling and tracked within the pipeline until it retires. Along the way, information such as TLB lookups, cache misses, time spent to issue etc is captured in the form of a sample. The sample is then filtered according to certain criteria (e.g. load latency) that can be specified in the event config (described under format/) and, if the sample satisfies the filter, it is written out to memory as a record, otherwise it is discarded. Only one operation can be sampled at a time. The in-memory buffer is linear and virtually addressed, raising an interrupt when it fills up. The PMU driver handles these interrupts to give the appearance of a ring buffer, as expected by the AUX code. The in-memory trace-like format is self-describing (though not parseable in reverse) and written as a series of records, with each record corresponding to a sample and consisting of a sequence of packets. These packets are defined by the architecture, although some have CPU-specific fields for recording information specific to the microarchitecture. As a simple example, a record generated for a branch instruction may consist of the following packets: 0 (Address) : Virtual PC of the branch instruction 1 (Type) : Conditional direct branch 2 (Counter) : Number of cycles taken from Dispatch to Issue 3 (Address) : Virtual branch target + condition flags 4 (Counter) : Number of cycles taken from Dispatch to Complete 5 (Events) : Mispredicted as not-taken 6 (END) : End of record It is also possible to toggle properties such as timestamp packets in each record. This patch adds support for SPE in the form of a new perf driver. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-22 13:36:32 +03:00
help
Enable perf support for the ARMv8.2 Statistical Profiling
Extension, which provides periodic sampling of operations in
the CPU pipeline and reports this via the perf AUX interface.
driver/perf: Add PMU driver for the ARM DMC-620 memory controller DMC-620 PMU supports total 10 counters which each is independently programmable to different events and can be started and stopped individually. Currently, it only supports ACPI. Other platforms feel free to test and add support for device tree. Usage example: #perf stat -e arm_dmc620_10008c000/clk_cycle_count/ -C 0 Get perf event for clk_cycle_count counter. #perf stat -e arm_dmc620_10008c000/clkdiv2_allocate,mask=0x1f,match=0x2f, incr=2,invert=1/ -C 0 The above example shows how to specify mask, match, incr, invert parameters for clkdiv2_allocate event. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com> Link: https://lore.kernel.org/r/1604518246-6198-1-git-send-email-tuanphan@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2020-11-04 22:30:43 +03:00
config ARM_DMC620_PMU
tristate "Enable PMU support for the ARM DMC-620 memory controller"
depends on (ARM64 && ACPI) || COMPILE_TEST
help
Support for PMU events monitoring on the ARM DMC-620 memory
controller.
drivers: perf: Add LLC-TAD perf counter support This driver adds support for Last-level cache tag-and-data unit (LLC-TAD) PMU that is featured in some of the Marvell's CN10K infrastructure silicons. The LLC is divided into 2N slices distributed across N Mesh tiles in a single-socket configuration. The driver always configures the same counter for all of the TADs. The user would end up effectively reserving one of eight counters in every TAD to look across all TADs. The occurrences of events are aggregated and presented to the user at the end of an application run. The driver does not provide a way for the user to partition TADs so that different TADs are used for different applications. The event counters are zeroed to start event counting to avoid any rollover issues. TAD perf counters are 64-bit, so it's not currently possible to overflow event counters at current mesh and core frequencies. To measure tad pmu events use perf tool stat command. For instance: perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application> perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com> Link: https://lore.kernel.org/r/20211115043506.6679-2-bbudiredla@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2021-11-15 07:35:05 +03:00
config MARVELL_CN10K_TAD_PMU
tristate "Marvell CN10K LLC-TAD PMU"
perf: MARVELL_CN10K_TAD_PMU should depend on ARCH_THUNDER The Marvell CN10K Last-Level cache Tag-and-data Units (LLC-TAD) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support. Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b4662a2c767d04cca19417e0c845edea2da262ad.1641995941.git.geert+renesas@glider.be Signed-off-by: Will Deacon <will@kernel.org>
2022-01-12 17:00:47 +03:00
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
drivers: perf: Add LLC-TAD perf counter support This driver adds support for Last-level cache tag-and-data unit (LLC-TAD) PMU that is featured in some of the Marvell's CN10K infrastructure silicons. The LLC is divided into 2N slices distributed across N Mesh tiles in a single-socket configuration. The driver always configures the same counter for all of the TADs. The user would end up effectively reserving one of eight counters in every TAD to look across all TADs. The occurrences of events are aggregated and presented to the user at the end of an application run. The driver does not provide a way for the user to partition TADs so that different TADs are used for different applications. The event counters are zeroed to start event counting to avoid any rollover issues. TAD perf counters are 64-bit, so it's not currently possible to overflow event counters at current mesh and core frequencies. To measure tad pmu events use perf tool stat command. For instance: perf stat -e tad_dat_msh_in_dss,tad_req_msh_out_any <application> perf stat -e tad_alloc_any,tad_hit_any,tad_tag_rd <application> Signed-off-by: Bhaskara Budiredla <bbudiredla@marvell.com> Link: https://lore.kernel.org/r/20211115043506.6679-2-bbudiredla@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2021-11-15 07:35:05 +03:00
help
Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
performance monitors on CN10K family silicons.
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver Add a new, weird and wonderful driver for the equally weird Apple PMU HW. Although the PMU itself is functional, we don't know much about the events yet, so this can be considered as yet another random number generator... Nonetheless, it can reliably count at least cycles and instructions in the usually wonky big-little way. For anything else, it of course supports raw event numbers. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2022-02-08 21:56:04 +03:00
config APPLE_M1_CPU_PMU
bool "Apple M1 CPU PMU support"
depends on ARM_PMU && ARCH_APPLE
help
Provides support for the non-architectural CPU PMUs present on
the Apple M1 SoCs and derivatives.
drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver support for Alibaba T-Head Yitian 710 SoC chip. Yitian supports DDR5/4 DRAM and targets cloud computing and HPC. Each PMU is registered as a device in /sys/bus/event_source/devices, and users can select event to monitor in each sub-channel, independently. For example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two sub-channels of the same channel in die 0. And the PMU device of die 1 is prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000. Due to hardware limitation, one of DDRSS Driveway PMU overflow interrupt shares the same irq number with MPAM ERR_IRQ. To register DDRSS PMU and MPAM drivers successfully, add IRQF_SHARED flag. Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Co-developed-by: Hongbo Yao <yaohongbo@linux.alibaba.com> Signed-off-by: Hongbo Yao <yaohongbo@linux.alibaba.com> Co-developed-by: Neng Chen <nengchen@linux.alibaba.com> Signed-off-by: Neng Chen <nengchen@linux.alibaba.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20220818031822.38415-3-xueshuai@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-18 06:18:21 +03:00
config ALIBABA_UNCORE_DRW_PMU
tristate "Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver"
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI The Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver relies solely on ACPI for matching. Hence add a dependency on ACPI, to prevent asking the user about this driver when configuring a kernel without ACPI support. Fixes: cf7b61073e45 ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/2a4407bb598285660fa5e604e56823ddb12bb0aa.1664285774.git.geert+renesas@glider.be Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-09-27 16:37:16 +03:00
depends on (ARM64 && ACPI) || COMPILE_TEST
drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver support for Alibaba T-Head Yitian 710 SoC chip. Yitian supports DDR5/4 DRAM and targets cloud computing and HPC. Each PMU is registered as a device in /sys/bus/event_source/devices, and users can select event to monitor in each sub-channel, independently. For example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two sub-channels of the same channel in die 0. And the PMU device of die 1 is prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000. Due to hardware limitation, one of DDRSS Driveway PMU overflow interrupt shares the same irq number with MPAM ERR_IRQ. To register DDRSS PMU and MPAM drivers successfully, add IRQF_SHARED flag. Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Co-developed-by: Hongbo Yao <yaohongbo@linux.alibaba.com> Signed-off-by: Hongbo Yao <yaohongbo@linux.alibaba.com> Co-developed-by: Neng Chen <nengchen@linux.alibaba.com> Signed-off-by: Neng Chen <nengchen@linux.alibaba.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20220818031822.38415-3-xueshuai@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org>
2022-08-18 06:18:21 +03:00
help
Support for Driveway PMU events monitoring on Yitian 710 DDR
Sub-system.
drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers This patch lets HiSilicon uncore PMU driver can be built as modules. A common module and three specific uncore PMU driver modules will be built. Export necessary functions in hisi_uncore_pmu module, and change irq_set_affinity to irq_set_affinity_hint to pass compile. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Tested-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1588820305-174479-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-07 05:58:25 +03:00
source "drivers/perf/hisilicon/Kconfig"
perf/marvell: cn10k DDR perf event core ownership As DDR perf event counters are not per core, so they should be accessed only by one core at a time. Select new core when previously owning core is going offline. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Bhaskara Budiredla <bbudiredla@marvell.com> Link: https://lore.kernel.org/r/20220211045346.17894-5-bbhushan2@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-11 07:53:46 +03:00
config MARVELL_CN10K_DDR_PMU
tristate "Enable MARVELL CN10K DRAM Subsystem(DSS) PMU Support"
perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support, Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be Signed-off-by: Will Deacon <will@kernel.org>
2022-03-29 16:10:10 +03:00
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
perf/marvell: cn10k DDR perf event core ownership As DDR perf event counters are not per core, so they should be accessed only by one core at a time. Select new core when previously owning core is going offline. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Reviewed-by: Bhaskara Budiredla <bbudiredla@marvell.com> Link: https://lore.kernel.org/r/20220211045346.17894-5-bbhushan2@marvell.com Signed-off-by: Will Deacon <will@kernel.org>
2022-02-11 07:53:46 +03:00
help
Enable perf support for Marvell DDR Performance monitoring
event on CN10K platform.
perf: arm_cspmu: Add support for ARM CoreSight PMU driver Add support for ARM CoreSight PMU driver framework and interfaces. The driver provides generic implementation to operate uncore PMU based on ARM CoreSight PMU architecture. The driver also provides interface to get vendor/implementation specific information, for example event attributes and formating. The specification used in this implementation can be found below: * ACPI Arm Performance Monitoring Unit table: https://developer.arm.com/documentation/den0117/latest * ARM Coresight PMU architecture: https://developer.arm.com/documentation/ihi0091/latest Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Link: https://lore.kernel.org/r/20221111222330.48602-2-bwicaksono@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2022-11-12 01:23:28 +03:00
source "drivers/perf/arm_cspmu/Kconfig"
perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver Add support for Amlogic Meson G12 Series SOC - DDR bandwidth PMU driver framework and interfaces. The PMU can not only monitor the total DDR bandwidth, but also individual IP module bandwidth. Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com> Tested-by: Chris Healy <healych@amazon.com> Link: https://lore.kernel.org/r/20221121021602.3306998-1-jiucheng.xu@amlogic.com Signed-off-by: Will Deacon <will@kernel.org>
2022-11-21 05:15:58 +03:00
source "drivers/perf/amlogic/Kconfig"
perf: CXL Performance Monitoring Unit driver CXL rev 3.0 introduces a standard performance monitoring hardware block to CXL. Instances are discovered using CXL Register Locator DVSEC entries. Each CXL component may have multiple PMUs. This initial driver supports a subset of types of counter. It supports counters that are either fixed or configurable, but requires that they support the ability to freeze and write value whilst frozen. Development done with QEMU model which will be posted shortly. Example: $ perf stat -a -e cxl_pmu_mem0.0/h2d_req_snpcur/ -e cxl_pmu_mem0.0/h2d_req_snpdata/ -e cxl_pmu_mem0.0/clock_ticks/ sleep 1 Performance counter stats for 'system wide': 96,757,023,244,321 cxl_pmu_mem0.0/h2d_req_snpcur/ 96,757,023,244,365 cxl_pmu_mem0.0/h2d_req_snpdata/ 193,514,046,488,653 cxl_pmu_mem0.0/clock_ticks/ 1.090539600 seconds time elapsed Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230526095824.16336-5-Jonathan.Cameron@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-05-26 12:58:23 +03:00
config CXL_PMU
tristate "CXL Performance Monitoring Unit"
depends on CXL_BUS
help
Support performance monitoring as defined in CXL rev 3.0
section 13.2: Performance Monitoring. CXL components may have
one or more CXL Performance Monitoring Units (CPMUs).
Say 'y/m' to enable a driver that will attach to performance
monitoring units and provide standard perf based interfaces.
If unsure say 'm'.
arm: perf: factor arm_pmu core out to drivers To enable sharing of the arm_pmu code with arm64, this patch factors it out to drivers/perf/. A new drivers/perf directory is added for performance monitor drivers to live under. MAINTAINERS is updated accordingly. Files added previously without a corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and perf_event.h) are also added. Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: augmented Kconfig help slightly] Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-07-06 14:23:53 +03:00
endmenu
Reference in New Issue Copy Permalink