iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-ep93xx/Kconfig

172 lines
4.0 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
# SPDX-License-Identifier: GPL-2.0-only
ARM: ep93xx: multiplatform support With the clock support and the interrupts out of the way, ep93xx can be compiled into the same kernel image as the other ARMv4/v5 platforms. The last obstacle are the two workarounds for broken boot loaders that require us to re-initialize the ethernet controller and/or the watchdog on certain machines. Move this code into the decompressor sources directly, checking for each possibly affected machine individually. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-01 15:58:09 +02:00
menuconfig ARCH_EP93XX
bool "EP93xx-based"
ARM: add ATAGS dependencies to non-DT platforms There are a total of eight platforms that only suppor ATAGS based boot with board files but no devicetree booting. For dove, the DT support is part of the mvebu platform, which shares driver but no code in arch/arm. Most of these will never get converted to DT, and the majority of the board files appear to be entirely unused already. There are still known users on a few machines, and there may be interest in converting some omap1, ep93xx or footbridge machines over in the future. For the moment, just add a Kconfig dependency to hide these platforms completely when CONFIG_ATAGS is disabled, and reorder the priority of the options: Rather than offering to turn ATAGS off for platforms that have DT support, make it a top-level setting that determines which platforms are visible. The s3c24xx platform supports one machine with DT support, but it cannot be built without also including ATAGS support, and the entire platform is scheduled for removal, so leaving the entire platform behind a dependency seems good enough. All defconfig files should keep working, as the option remains default enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-05 14:10:34 +02:00
depends on ATAGS
ARM: ep93xx: multiplatform support With the clock support and the interrupts out of the way, ep93xx can be compiled into the same kernel image as the other ARMv4/v5 platforms. The last obstacle are the two workarounds for broken boot loaders that require us to re-initialize the ethernet controller and/or the watchdog on certain machines. Move this code into the decompressor sources directly, checking for each possibly affected machine individually. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-01 15:58:09 +02:00
depends on ARCH_MULTI_V4T
ARM: rework endianess selection Choosing big-endian vs little-endian kernels in Kconfig has not worked correctly since the introduction of CONFIG_ARCH_MULTIPLATFORM a long time ago. The problems is that CONFIG_BIG_ENDIAN depends on ARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platform in the config, but would actually have to be supported by all of them. This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 and tend to just work aside from problems in nonportable device drivers. For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORM were never set together, so this was disabled on all those machines except for IXP4xx. As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better to formalize this logic: all ARMv4/v5 platforms get an explicit dependency on being either big-endian (ixp4xx) or little-endian (the rest). We may want to fix ixp4xx in the future to support both, but it does not work in LE mode at the moment. For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work. Out of these, I picked b) because it seemed slighly more logical to me. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-04 11:52:31 +02:00
depends on CPU_LITTLE_ENDIAN
ARM: ep93xx: multiplatform support With the clock support and the interrupts out of the way, ep93xx can be compiled into the same kernel image as the other ARMv4/v5 platforms. The last obstacle are the two workarounds for broken boot loaders that require us to re-initialize the ethernet controller and/or the watchdog on certain machines. Move this code into the decompressor sources directly, checking for each possibly affected machine individually. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-01 15:58:09 +02:00
select ARCH_SPARSEMEM_ENABLE
select ARM_AMBA
select ARM_VIC
select CLKSRC_MMIO
select CPU_ARM920T
select GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
if ARCH_EP93XX
menu "Cirrus EP93xx Implementation Options"
arm: ep93xx: use gpio_led_register_device Use gpio_led_register_device to register the two leds connected to the ep93xx. Since this is a common feature for all ep93xx based boards, create a new Kconfig option, EP93XX_SOC_COMMON, to select the LEDS_GPIO_REGISTER feature. The struct gpio_led and struct gpio_led_platform_data variables have been changed to const struct because of: commit 9517f925f2eb9ffca78b3f0f9389fc675bcb572c leds: make *struct gpio_led_platform_data.leds const They have also been marked as __initconst because the helper function gpio_led_register_device makes a deep copy of the platform data to allow it to live in init memory: commit 4440673a95e63ad888a41db596edaa0c55d3a332 leds: provide helper to register "leds-gpio" devices Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-11 15:44:42 -07:00
config EP93XX_SOC_COMMON
bool
default y
ARM: ep93xx: use soc bus Use the soc bus to report the silicon revision and Maverick Key. Both are not currently exposed to the user. In addition, fill in the SoC family and machine for completeness. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-19 10:23:06 +11:00
select SOC_BUS
arm: ep93xx: use gpio_led_register_device Use gpio_led_register_device to register the two leds connected to the ep93xx. Since this is a common feature for all ep93xx based boards, create a new Kconfig option, EP93XX_SOC_COMMON, to select the LEDS_GPIO_REGISTER feature. The struct gpio_led and struct gpio_led_platform_data variables have been changed to const struct because of: commit 9517f925f2eb9ffca78b3f0f9389fc675bcb572c leds: make *struct gpio_led_platform_data.leds const They have also been marked as __initconst because the helper function gpio_led_register_device makes a deep copy of the platform data to allow it to live in init memory: commit 4440673a95e63ad888a41db596edaa0c55d3a332 leds: provide helper to register "leds-gpio" devices Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ryan Mallon <rmallon@gmail.com>
2012-04-11 15:44:42 -07:00
select LEDS_GPIO_REGISTER
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
comment "EP93xx Platforms"
[ARM] 3964/1: ep93xx: add ads sphere support Add initial board support for the ADS Sphere board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 15:15:55 +01:00
config MACH_ADSSPHERE
bool "Support ADS Sphere"
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
[ARM] 3964/1: ep93xx: add ads sphere support Add initial board support for the ADS Sphere board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 15:15:55 +01:00
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative The BK3 board is a derivative of the ts72xx reference design. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
2017-12-12 00:36:25 +01:00
config MACH_BK3
bool "Support Liebherr BK3.1"
select MACH_TS72XX
help
Say 'Y' here if you want your kernel to support the
Liebherr controller BK3.1.
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
config MACH_EDB93XX
bool
config MACH_EDB9301
bool "Support Cirrus Logic EDB9301"
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9301 Evaluation Board.
[ARM] 3674/1: ep93xx: add cirrus logic edb9302 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 16:06:31 +01:00
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3674/1: ep93xx: add cirrus logic edb9302 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 16:06:31 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
[ARM] 3993/1: ep93xx: add cirrus logic edb9302a support Add support for the Cirrus Logic EDB9302A Evaluation Board. Confirmed to work by Chase Douglas. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-06 23:07:13 +01:00
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3993/1: ep93xx: add cirrus logic edb9302a support Add support for the Cirrus Logic EDB9302A Evaluation Board. Confirmed to work by Chase Douglas. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-06 23:07:13 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302A Evaluation Board.
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 08:30:16 +01:00
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 08:30:16 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
[ARM] 5309/1: ep93xx: add edb9307a platform Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 20:01:30 +01:00
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 5309/1: ep93xx: add edb9307a platform Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 20:01:30 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307A Evaluation Board.
[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 10:48:02 +01:00
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 10:48:02 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9312 Evaluation Board.
[ARM] 3671/1: ep93xx: add cirrus logic edb9315 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27 23:03:04 +01:00
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3671/1: ep93xx: add cirrus logic edb9315 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27 23:03:04 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315A, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. The EDB9315A is a low-cost version of the EDB9315, and has only 16M of NOR flash, while the EDB9315 has 32M. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:56:47 +01:00
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315A, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. The EDB9315A is a low-cost version of the EDB9315, and has only 16M of NOR flash, while the EDB9315 has 32M. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:56:47 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
config MACH_GESBC9312
bool "Support Glomation GESBC-9312-sx"
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
bool
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9H
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
bool "Support Contec Micro9-High"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
help
Say 'Y' here if you want your kernel to support the
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
Contec Micro9-High board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9M
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
bool "Support Contec Micro9-Mid"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
help
Say 'Y' here if you want your kernel to support the
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
Contec Micro9-Mid board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9L
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
bool "Support Contec Micro9-Lite"
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
help
Say 'Y' here if you want your kernel to support the
ARM: 5750/1: ep93xx/micro9: Update platform code Update Contec Micro9 platform code Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5749/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:39:09 +01:00
Contec Micro9-Lite board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim Add Contec Micro9-Slim support Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5750/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:41:01 +01:00
config MACH_MICRO9S
bool "Support Contec Micro9-Slim"
select MACH_MICRO9
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim Add Contec Micro9-Slim support Cc: Ryan Mallon <ryan@bluewatersys.com> Requires: 5750/1 Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-07 08:41:01 +01:00
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
ARM: 5892/1: ep93xx: Add support for Simplemachines Sim.One board Add support for the Simplemachines EP9307 based Sim.One board. Cc: Hartley Sweeten <hartleys@visionengravers.com> Cc: Sergio Sorrenti <sergio.sorrenti@gmail.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-22 01:42:02 +01:00
config MACH_SIM_ONE
bool "Support Simplemachines Sim.One board"
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
ARM: 5892/1: ep93xx: Add support for Simplemachines Sim.One board Add support for the Simplemachines EP9307 based Sim.One board. Cc: Hartley Sweeten <hartleys@visionengravers.com> Cc: Sergio Sorrenti <sergio.sorrenti@gmail.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-22 01:42:02 +01:00
help
Say 'Y' here if you want your kernel to support the
Simplemachines Sim.One board.
ARM: 5937/1: Add support for EP9315 based Snapper CL15 board Add support for Bluewater Systems EP9315 based Snapper CL15 single board computer module. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 01:16:01 +01:00
config MACH_SNAPPER_CL15
bool "Support Bluewater Systems Snapper CL15 Module"
ARM: ep93xx: mark most board files as unused Most of the remaining ARM board files in the kernel have no known users, and we plan to remove those in early 2023. For ep93xx, Alexander Sverdlin still has access to the edb93xx family of reference boards, while Nikita Shubin has a ts7250 and is working on a device tree conversion for those. Hartley Sweeten has a MACH_VISION_EP9307 that is still in use. This is a total of nine machine definitions that we will keep around, but these are all similar machines and are defined in only two board files. The other six board files now have a dependency on CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away. Cc: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lukasz Majewski <lukma@denx.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-18 18:09:30 +02:00
depends on UNUSED_BOARD_FILES
ARM: 5937/1: Add support for EP9315 based Snapper CL15 board Add support for Bluewater Systems EP9315 based Snapper CL15 single board computer module. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 01:16:01 +01:00
help
Say 'Y' here if you want your kernel to support the Bluewater
Systems Snapper CL15 Module.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
ep93xx: add support Vision EP9307 SoM Add support for Vision Engraving Systems EP9307 based SoM. Signed-off-by: Hartley Sweeten <hartleys@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-08 23:04:34 +01:00
config MACH_VISION_EP9307
bool "Support Vision Engraving Systems EP9307 SoM"
help
Say 'Y' here if you want your kernel to support the
Vision Engraving Systems EP9307 SoM.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
endmenu
endif
Reference in New Issue Copy Permalink