iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

1670 lines
43 KiB
C
Raw Normal View History

drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018 MediaTek Inc.
* Author: Jitao Shi <jitao.shi@mediatek.com>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
drm/panel: Read panel orientation for BOE TV101WUM-NL6 This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-14 00:56:07 +03:00
#include <drm/drm_connector.h>
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
#include <video/mipi_display.h>
struct panel_desc {
const struct drm_display_mode *modes;
unsigned int bpc;
/**
* @width_mm: width of the panel's active display area
* @height_mm: height of the panel's active display area
*/
struct {
unsigned int width_mm;
unsigned int height_mm;
} size;
unsigned long mode_flags;
enum mipi_dsi_pixel_format format;
const struct panel_init_cmd *init_cmds;
unsigned int lanes;
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
bool discharge_on_disable;
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
};
struct boe_panel {
struct drm_panel base;
struct mipi_dsi_device *dsi;
const struct panel_desc *desc;
drm/panel: Read panel orientation for BOE TV101WUM-NL6 This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-14 00:56:07 +03:00
enum drm_panel_orientation orientation;
drm/panel: boe-tv101wum-nl6: Support enabling a 3.3V rail The auo,b101uan08.3 panel (already supported by this driver) has a 3.3V rail that needs to be turned on. For previous users of this panel this voltage was directly output by pmic. On a new user (the not-yet-upstream sc7180-trogdor-mrbland board) we need to turn the 3.3V rail on. Add support in the driver for this. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:49 +08:00
struct regulator *pp3300;
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
struct regulator *pp1800;
struct regulator *avee;
struct regulator *avdd;
struct gpio_desc *enable_gpio;
bool prepared;
};
enum dsi_cmd_type {
INIT_DCS_CMD,
DELAY_CMD,
};
struct panel_init_cmd {
enum dsi_cmd_type type;
size_t len;
const char *data;
};
#define _INIT_DCS_CMD(...) { \
.type = INIT_DCS_CMD, \
.len = sizeof((char[]){__VA_ARGS__}), \
.data = (char[]){__VA_ARGS__} }
#define _INIT_DELAY_CMD(...) { \
.type = DELAY_CMD,\
.len = sizeof((char[]){__VA_ARGS__}), \
.data = (char[]){__VA_ARGS__} }
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
static const struct panel_init_cmd boe_tv110c9m_init_cmd[] = {
_INIT_DCS_CMD(0xFF, 0x20),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x05, 0xD9),
_INIT_DCS_CMD(0x07, 0x78),
_INIT_DCS_CMD(0x08, 0x5A),
_INIT_DCS_CMD(0x0D, 0x63),
_INIT_DCS_CMD(0x0E, 0x91),
_INIT_DCS_CMD(0x0F, 0x73),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x95, 0xE6),
_INIT_DCS_CMD(0x96, 0xF0),
drm/panel: Update Boe-tv110c9m initial code Optimize two problems a)Turn off low voltage detection register.During the esd test, the low-voltage detection ic may be triggered to enter the slpin state, so a black screen occurs on the panel. b)Optimize CMD2 page1 gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211231045056.118640-1-yangcong5@huaqin.corp-partner.google.com
2021-12-31 12:50:56 +08:00
_INIT_DCS_CMD(0x30, 0x00),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x6D, 0x66),
_INIT_DCS_CMD(0x75, 0xA2),
_INIT_DCS_CMD(0x77, 0x3B),
_INIT_DCS_CMD(0xB0, 0x00, 0x08, 0x00, 0x23, 0x00, 0x4D, 0x00, 0x6D, 0x00, 0x89, 0x00, 0xA1, 0x00, 0xB6, 0x00, 0xC9),
_INIT_DCS_CMD(0xB1, 0x00, 0xDA, 0x01, 0x13, 0x01, 0x3C, 0x01, 0x7E, 0x01, 0xAB, 0x01, 0xF7, 0x02, 0x2F, 0x02, 0x31),
_INIT_DCS_CMD(0xB2, 0x02, 0x67, 0x02, 0xA6, 0x02, 0xD1, 0x03, 0x08, 0x03, 0x2E, 0x03, 0x5B, 0x03, 0x6B, 0x03, 0x7B),
_INIT_DCS_CMD(0xB3, 0x03, 0x8E, 0x03, 0xA2, 0x03, 0xB7, 0x03, 0xE7, 0x03, 0xFD, 0x03, 0xFF),
_INIT_DCS_CMD(0xB4, 0x00, 0x08, 0x00, 0x23, 0x00, 0x4D, 0x00, 0x6D, 0x00, 0x89, 0x00, 0xA1, 0x00, 0xB6, 0x00, 0xC9),
_INIT_DCS_CMD(0xB5, 0x00, 0xDA, 0x01, 0x13, 0x01, 0x3C, 0x01, 0x7E, 0x01, 0xAB, 0x01, 0xF7, 0x02, 0x2F, 0x02, 0x31),
_INIT_DCS_CMD(0xB6, 0x02, 0x67, 0x02, 0xA6, 0x02, 0xD1, 0x03, 0x08, 0x03, 0x2E, 0x03, 0x5B, 0x03, 0x6B, 0x03, 0x7B),
_INIT_DCS_CMD(0xB7, 0x03, 0x8E, 0x03, 0xA2, 0x03, 0xB7, 0x03, 0xE7, 0x03, 0xFD, 0x03, 0xFF),
_INIT_DCS_CMD(0xB8, 0x00, 0x08, 0x00, 0x23, 0x00, 0x4D, 0x00, 0x6D, 0x00, 0x89, 0x00, 0xA1, 0x00, 0xB6, 0x00, 0xC9),
_INIT_DCS_CMD(0xB9, 0x00, 0xDA, 0x01, 0x13, 0x01, 0x3C, 0x01, 0x7E, 0x01, 0xAB, 0x01, 0xF7, 0x02, 0x2F, 0x02, 0x31),
_INIT_DCS_CMD(0xBA, 0x02, 0x67, 0x02, 0xA6, 0x02, 0xD1, 0x03, 0x08, 0x03, 0x2E, 0x03, 0x5B, 0x03, 0x6B, 0x03, 0x7B),
_INIT_DCS_CMD(0xBB, 0x03, 0x8E, 0x03, 0xA2, 0x03, 0xB7, 0x03, 0xE7, 0x03, 0xFD, 0x03, 0xFF),
_INIT_DCS_CMD(0xFF, 0x21),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0xB0, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x45, 0x00, 0x65, 0x00, 0x81, 0x00, 0x99, 0x00, 0xAE, 0x00, 0xC1),
_INIT_DCS_CMD(0xB1, 0x00, 0xD2, 0x01, 0x0B, 0x01, 0x34, 0x01, 0x76, 0x01, 0xA3, 0x01, 0xEF, 0x02, 0x27, 0x02, 0x29),
_INIT_DCS_CMD(0xB2, 0x02, 0x5F, 0x02, 0x9E, 0x02, 0xC9, 0x03, 0x00, 0x03, 0x26, 0x03, 0x53, 0x03, 0x63, 0x03, 0x73),
drm/panel: Update Boe-tv110c9m initial code Optimize two problems a)Turn off low voltage detection register.During the esd test, the low-voltage detection ic may be triggered to enter the slpin state, so a black screen occurs on the panel. b)Optimize CMD2 page1 gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211231045056.118640-1-yangcong5@huaqin.corp-partner.google.com
2021-12-31 12:50:56 +08:00
_INIT_DCS_CMD(0xB3, 0x03, 0x86, 0x03, 0x9A, 0x03, 0xAF, 0x03, 0xDF, 0x03, 0xF5, 0x03, 0xE0),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xB4, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x45, 0x00, 0x65, 0x00, 0x81, 0x00, 0x99, 0x00, 0xAE, 0x00, 0xC1),
_INIT_DCS_CMD(0xB5, 0x00, 0xD2, 0x01, 0x0B, 0x01, 0x34, 0x01, 0x76, 0x01, 0xA3, 0x01, 0xEF, 0x02, 0x27, 0x02, 0x29),
_INIT_DCS_CMD(0xB6, 0x02, 0x5F, 0x02, 0x9E, 0x02, 0xC9, 0x03, 0x00, 0x03, 0x26, 0x03, 0x53, 0x03, 0x63, 0x03, 0x73),
drm/panel: Update Boe-tv110c9m initial code Optimize two problems a)Turn off low voltage detection register.During the esd test, the low-voltage detection ic may be triggered to enter the slpin state, so a black screen occurs on the panel. b)Optimize CMD2 page1 gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211231045056.118640-1-yangcong5@huaqin.corp-partner.google.com
2021-12-31 12:50:56 +08:00
_INIT_DCS_CMD(0xB7, 0x03, 0x86, 0x03, 0x9A, 0x03, 0xAF, 0x03, 0xDF, 0x03, 0xF5, 0x03, 0xE0),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xB8, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x45, 0x00, 0x65, 0x00, 0x81, 0x00, 0x99, 0x00, 0xAE, 0x00, 0xC1),
_INIT_DCS_CMD(0xB9, 0x00, 0xD2, 0x01, 0x0B, 0x01, 0x34, 0x01, 0x76, 0x01, 0xA3, 0x01, 0xEF, 0x02, 0x27, 0x02, 0x29),
_INIT_DCS_CMD(0xBA, 0x02, 0x5F, 0x02, 0x9E, 0x02, 0xC9, 0x03, 0x00, 0x03, 0x26, 0x03, 0x53, 0x03, 0x63, 0x03, 0x73),
drm/panel: Update Boe-tv110c9m initial code Optimize two problems a)Turn off low voltage detection register.During the esd test, the low-voltage detection ic may be triggered to enter the slpin state, so a black screen occurs on the panel. b)Optimize CMD2 page1 gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211231045056.118640-1-yangcong5@huaqin.corp-partner.google.com
2021-12-31 12:50:56 +08:00
_INIT_DCS_CMD(0xBB, 0x03, 0x86, 0x03, 0x9A, 0x03, 0xAF, 0x03, 0xDF, 0x03, 0xF5, 0x03, 0xE0),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0x24),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0x00),
_INIT_DCS_CMD(0x01, 0x00),
_INIT_DCS_CMD(0x02, 0x1C),
_INIT_DCS_CMD(0x03, 0x1C),
_INIT_DCS_CMD(0x04, 0x1D),
_INIT_DCS_CMD(0x05, 0x1D),
_INIT_DCS_CMD(0x06, 0x04),
_INIT_DCS_CMD(0x07, 0x04),
_INIT_DCS_CMD(0x08, 0x0F),
_INIT_DCS_CMD(0x09, 0x0F),
_INIT_DCS_CMD(0x0A, 0x0E),
_INIT_DCS_CMD(0x0B, 0x0E),
_INIT_DCS_CMD(0x0C, 0x0D),
_INIT_DCS_CMD(0x0D, 0x0D),
_INIT_DCS_CMD(0x0E, 0x0C),
_INIT_DCS_CMD(0x0F, 0x0C),
_INIT_DCS_CMD(0x10, 0x08),
_INIT_DCS_CMD(0x11, 0x08),
_INIT_DCS_CMD(0x12, 0x00),
_INIT_DCS_CMD(0x13, 0x00),
_INIT_DCS_CMD(0x14, 0x00),
_INIT_DCS_CMD(0x15, 0x00),
_INIT_DCS_CMD(0x16, 0x00),
_INIT_DCS_CMD(0x17, 0x00),
_INIT_DCS_CMD(0x18, 0x1C),
_INIT_DCS_CMD(0x19, 0x1C),
_INIT_DCS_CMD(0x1A, 0x1D),
_INIT_DCS_CMD(0x1B, 0x1D),
_INIT_DCS_CMD(0x1C, 0x04),
_INIT_DCS_CMD(0x1D, 0x04),
_INIT_DCS_CMD(0x1E, 0x0F),
_INIT_DCS_CMD(0x1F, 0x0F),
_INIT_DCS_CMD(0x20, 0x0E),
_INIT_DCS_CMD(0x21, 0x0E),
_INIT_DCS_CMD(0x22, 0x0D),
_INIT_DCS_CMD(0x23, 0x0D),
_INIT_DCS_CMD(0x24, 0x0C),
_INIT_DCS_CMD(0x25, 0x0C),
_INIT_DCS_CMD(0x26, 0x08),
_INIT_DCS_CMD(0x27, 0x08),
_INIT_DCS_CMD(0x28, 0x00),
_INIT_DCS_CMD(0x29, 0x00),
_INIT_DCS_CMD(0x2A, 0x00),
_INIT_DCS_CMD(0x2B, 0x00),
_INIT_DCS_CMD(0x2D, 0x20),
_INIT_DCS_CMD(0x2F, 0x0A),
_INIT_DCS_CMD(0x30, 0x44),
_INIT_DCS_CMD(0x33, 0x0C),
_INIT_DCS_CMD(0x34, 0x32),
_INIT_DCS_CMD(0x37, 0x44),
_INIT_DCS_CMD(0x38, 0x40),
_INIT_DCS_CMD(0x39, 0x00),
_INIT_DCS_CMD(0x3A, 0x5D),
_INIT_DCS_CMD(0x3B, 0x60),
_INIT_DCS_CMD(0x3D, 0x42),
_INIT_DCS_CMD(0x3F, 0x06),
_INIT_DCS_CMD(0x43, 0x06),
_INIT_DCS_CMD(0x47, 0x66),
_INIT_DCS_CMD(0x4A, 0x5D),
_INIT_DCS_CMD(0x4B, 0x60),
_INIT_DCS_CMD(0x4C, 0x91),
_INIT_DCS_CMD(0x4D, 0x21),
_INIT_DCS_CMD(0x4E, 0x43),
_INIT_DCS_CMD(0x51, 0x12),
_INIT_DCS_CMD(0x52, 0x34),
_INIT_DCS_CMD(0x55, 0x82, 0x02),
_INIT_DCS_CMD(0x56, 0x04),
_INIT_DCS_CMD(0x58, 0x21),
_INIT_DCS_CMD(0x59, 0x30),
_INIT_DCS_CMD(0x5A, 0x60),
_INIT_DCS_CMD(0x5B, 0x50),
_INIT_DCS_CMD(0x5E, 0x00, 0x06),
_INIT_DCS_CMD(0x5F, 0x00),
_INIT_DCS_CMD(0x65, 0x82),
_INIT_DCS_CMD(0x7E, 0x20),
_INIT_DCS_CMD(0x7F, 0x3C),
_INIT_DCS_CMD(0x82, 0x04),
_INIT_DCS_CMD(0x97, 0xC0),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xB6, 0x05, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05, 0x00, 0x00),
_INIT_DCS_CMD(0x91, 0x44),
_INIT_DCS_CMD(0x92, 0xA9),
_INIT_DCS_CMD(0x93, 0x1A),
_INIT_DCS_CMD(0x94, 0x96),
_INIT_DCS_CMD(0xD7, 0x55),
_INIT_DCS_CMD(0xDA, 0x0A),
_INIT_DCS_CMD(0xDE, 0x08),
_INIT_DCS_CMD(0xDB, 0x05),
_INIT_DCS_CMD(0xDC, 0xA9),
_INIT_DCS_CMD(0xDD, 0x22),
_INIT_DCS_CMD(0xDF, 0x05),
_INIT_DCS_CMD(0xE0, 0xA9),
_INIT_DCS_CMD(0xE1, 0x05),
_INIT_DCS_CMD(0xE2, 0xA9),
_INIT_DCS_CMD(0xE3, 0x05),
_INIT_DCS_CMD(0xE4, 0xA9),
_INIT_DCS_CMD(0xE5, 0x05),
_INIT_DCS_CMD(0xE6, 0xA9),
_INIT_DCS_CMD(0x5C, 0x00),
_INIT_DCS_CMD(0x5D, 0x00),
_INIT_DCS_CMD(0x8D, 0x00),
_INIT_DCS_CMD(0x8E, 0x00),
_INIT_DCS_CMD(0xB5, 0x90),
_INIT_DCS_CMD(0xFF, 0x25),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x05, 0x00),
_INIT_DCS_CMD(0x19, 0x07),
_INIT_DCS_CMD(0x1F, 0x60),
_INIT_DCS_CMD(0x20, 0x50),
_INIT_DCS_CMD(0x26, 0x60),
_INIT_DCS_CMD(0x27, 0x50),
_INIT_DCS_CMD(0x33, 0x60),
_INIT_DCS_CMD(0x34, 0x50),
_INIT_DCS_CMD(0x3F, 0xE0),
_INIT_DCS_CMD(0x40, 0x00),
_INIT_DCS_CMD(0x44, 0x00),
_INIT_DCS_CMD(0x45, 0x40),
_INIT_DCS_CMD(0x48, 0x60),
_INIT_DCS_CMD(0x49, 0x50),
_INIT_DCS_CMD(0x5B, 0x00),
_INIT_DCS_CMD(0x5C, 0x00),
_INIT_DCS_CMD(0x5D, 0x00),
_INIT_DCS_CMD(0x5E, 0xD0),
_INIT_DCS_CMD(0x61, 0x60),
_INIT_DCS_CMD(0x62, 0x50),
_INIT_DCS_CMD(0xF1, 0x10),
_INIT_DCS_CMD(0xFF, 0x2A),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x64, 0x16),
_INIT_DCS_CMD(0x67, 0x16),
_INIT_DCS_CMD(0x6A, 0x16),
_INIT_DCS_CMD(0x70, 0x30),
_INIT_DCS_CMD(0xA2, 0xF3),
_INIT_DCS_CMD(0xA3, 0xFF),
_INIT_DCS_CMD(0xA4, 0xFF),
_INIT_DCS_CMD(0xA5, 0xFF),
_INIT_DCS_CMD(0xD6, 0x08),
_INIT_DCS_CMD(0xFF, 0x26),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0xA1),
_INIT_DCS_CMD(0x02, 0x31),
_INIT_DCS_CMD(0x04, 0x28),
_INIT_DCS_CMD(0x06, 0x30),
_INIT_DCS_CMD(0x0C, 0x16),
_INIT_DCS_CMD(0x0D, 0x0D),
_INIT_DCS_CMD(0x0F, 0x00),
_INIT_DCS_CMD(0x11, 0x00),
_INIT_DCS_CMD(0x12, 0x50),
_INIT_DCS_CMD(0x13, 0x56),
_INIT_DCS_CMD(0x14, 0x57),
_INIT_DCS_CMD(0x15, 0x00),
_INIT_DCS_CMD(0x16, 0x10),
_INIT_DCS_CMD(0x17, 0xA0),
_INIT_DCS_CMD(0x18, 0x86),
_INIT_DCS_CMD(0x19, 0x0D),
_INIT_DCS_CMD(0x1A, 0x7F),
_INIT_DCS_CMD(0x1B, 0x0C),
_INIT_DCS_CMD(0x1C, 0xBF),
_INIT_DCS_CMD(0x22, 0x00),
_INIT_DCS_CMD(0x23, 0x00),
_INIT_DCS_CMD(0x2A, 0x0D),
_INIT_DCS_CMD(0x2B, 0x7F),
_INIT_DCS_CMD(0x1D, 0x00),
_INIT_DCS_CMD(0x1E, 0x65),
_INIT_DCS_CMD(0x1F, 0x65),
_INIT_DCS_CMD(0x24, 0x00),
_INIT_DCS_CMD(0x25, 0x65),
_INIT_DCS_CMD(0x2F, 0x05),
_INIT_DCS_CMD(0x30, 0x65),
_INIT_DCS_CMD(0x31, 0x05),
_INIT_DCS_CMD(0x32, 0x7D),
_INIT_DCS_CMD(0x39, 0x00),
_INIT_DCS_CMD(0x3A, 0x65),
_INIT_DCS_CMD(0x20, 0x01),
_INIT_DCS_CMD(0x33, 0x11),
_INIT_DCS_CMD(0x34, 0x78),
_INIT_DCS_CMD(0x35, 0x16),
_INIT_DCS_CMD(0xC8, 0x04),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0xC9, 0x9E),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xCA, 0x4E),
_INIT_DCS_CMD(0xCB, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0xA9, 0x49),
_INIT_DCS_CMD(0xAA, 0x4B),
_INIT_DCS_CMD(0xAB, 0x48),
_INIT_DCS_CMD(0xAC, 0x43),
_INIT_DCS_CMD(0xAD, 0x40),
_INIT_DCS_CMD(0xAE, 0x50),
_INIT_DCS_CMD(0xAF, 0x44),
_INIT_DCS_CMD(0xB0, 0x54),
_INIT_DCS_CMD(0xB1, 0x4E),
_INIT_DCS_CMD(0xB2, 0x4D),
_INIT_DCS_CMD(0xB3, 0x4C),
_INIT_DCS_CMD(0xB4, 0x41),
_INIT_DCS_CMD(0xB5, 0x47),
_INIT_DCS_CMD(0xB6, 0x53),
_INIT_DCS_CMD(0xB7, 0x3E),
_INIT_DCS_CMD(0xB8, 0x51),
_INIT_DCS_CMD(0xB9, 0x3C),
_INIT_DCS_CMD(0xBA, 0x3B),
_INIT_DCS_CMD(0xBB, 0x46),
_INIT_DCS_CMD(0xBC, 0x45),
_INIT_DCS_CMD(0xBD, 0x55),
_INIT_DCS_CMD(0xBE, 0x3D),
_INIT_DCS_CMD(0xBF, 0x3F),
_INIT_DCS_CMD(0xC0, 0x52),
_INIT_DCS_CMD(0xC1, 0x4A),
_INIT_DCS_CMD(0xC2, 0x39),
_INIT_DCS_CMD(0xC3, 0x4F),
_INIT_DCS_CMD(0xC4, 0x3A),
_INIT_DCS_CMD(0xC5, 0x42),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0x27),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x56, 0x06),
_INIT_DCS_CMD(0x58, 0x80),
_INIT_DCS_CMD(0x59, 0x75),
_INIT_DCS_CMD(0x5A, 0x00),
_INIT_DCS_CMD(0x5B, 0x02),
_INIT_DCS_CMD(0x5C, 0x00),
_INIT_DCS_CMD(0x5D, 0x00),
_INIT_DCS_CMD(0x5E, 0x20),
_INIT_DCS_CMD(0x5F, 0x10),
_INIT_DCS_CMD(0x60, 0x00),
_INIT_DCS_CMD(0x61, 0x2E),
_INIT_DCS_CMD(0x62, 0x00),
_INIT_DCS_CMD(0x63, 0x01),
_INIT_DCS_CMD(0x64, 0x43),
_INIT_DCS_CMD(0x65, 0x2D),
_INIT_DCS_CMD(0x66, 0x00),
_INIT_DCS_CMD(0x67, 0x01),
_INIT_DCS_CMD(0x68, 0x44),
_INIT_DCS_CMD(0x00, 0x00),
_INIT_DCS_CMD(0x78, 0x00),
_INIT_DCS_CMD(0xC3, 0x00),
_INIT_DCS_CMD(0xFF, 0x2A),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x22, 0x2F),
_INIT_DCS_CMD(0x23, 0x08),
_INIT_DCS_CMD(0x24, 0x00),
_INIT_DCS_CMD(0x25, 0x65),
_INIT_DCS_CMD(0x26, 0xF8),
_INIT_DCS_CMD(0x27, 0x00),
_INIT_DCS_CMD(0x28, 0x1A),
_INIT_DCS_CMD(0x29, 0x00),
_INIT_DCS_CMD(0x2A, 0x1A),
_INIT_DCS_CMD(0x2B, 0x00),
_INIT_DCS_CMD(0x2D, 0x1A),
_INIT_DCS_CMD(0xFF, 0x23),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0x80),
_INIT_DCS_CMD(0x07, 0x00),
_INIT_DCS_CMD(0xFF, 0xE0),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x14, 0x60),
_INIT_DCS_CMD(0x16, 0xC0),
_INIT_DCS_CMD(0xFF, 0xF0),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x3A, 0x08),
_INIT_DCS_CMD(0xFF, 0x10),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0xB9, 0x01),
_INIT_DCS_CMD(0xFF, 0x20),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x18, 0x40),
_INIT_DCS_CMD(0xFF, 0x10),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0xB9, 0x02),
_INIT_DCS_CMD(0x35, 0x00),
_INIT_DCS_CMD(0x51, 0x00, 0xFF),
_INIT_DCS_CMD(0x53, 0x24),
_INIT_DCS_CMD(0x55, 0x00),
_INIT_DCS_CMD(0xBB, 0x13),
_INIT_DCS_CMD(0x3B, 0x03, 0x96, 0x1A, 0x04, 0x04),
_INIT_DELAY_CMD(100),
_INIT_DCS_CMD(0x11),
_INIT_DELAY_CMD(200),
_INIT_DCS_CMD(0x29),
_INIT_DELAY_CMD(100),
{},
};
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
static const struct panel_init_cmd inx_hj110iz_init_cmd[] = {
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0x20),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x05, 0xD1),
_INIT_DCS_CMD(0x0D, 0x63),
_INIT_DCS_CMD(0x07, 0x8C),
_INIT_DCS_CMD(0x08, 0x4B),
_INIT_DCS_CMD(0x0E, 0x91),
_INIT_DCS_CMD(0x0F, 0x69),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x95, 0xF5),
_INIT_DCS_CMD(0x96, 0xF5),
_INIT_DCS_CMD(0x9D, 0x00),
_INIT_DCS_CMD(0x9E, 0x00),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x69, 0x98),
_INIT_DCS_CMD(0x75, 0xA2),
_INIT_DCS_CMD(0x77, 0xB3),
_INIT_DCS_CMD(0xFF, 0x24),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x91, 0x44),
_INIT_DCS_CMD(0x92, 0x7A),
_INIT_DCS_CMD(0x93, 0x1A),
_INIT_DCS_CMD(0x94, 0x40),
_INIT_DCS_CMD(0x9A, 0x08),
_INIT_DCS_CMD(0x60, 0x96),
_INIT_DCS_CMD(0x61, 0xD0),
_INIT_DCS_CMD(0x63, 0x70),
_INIT_DCS_CMD(0xC2, 0xCF),
_INIT_DCS_CMD(0x9B, 0x0F),
_INIT_DCS_CMD(0x9A, 0x08),
_INIT_DCS_CMD(0x00, 0x03),
_INIT_DCS_CMD(0x01, 0x03),
_INIT_DCS_CMD(0x02, 0x03),
_INIT_DCS_CMD(0x03, 0x03),
_INIT_DCS_CMD(0x04, 0x03),
_INIT_DCS_CMD(0x05, 0x03),
_INIT_DCS_CMD(0x06, 0x22),
_INIT_DCS_CMD(0x07, 0x06),
_INIT_DCS_CMD(0x08, 0x00),
_INIT_DCS_CMD(0x09, 0x1D),
_INIT_DCS_CMD(0x0A, 0x1C),
_INIT_DCS_CMD(0x0B, 0x13),
_INIT_DCS_CMD(0x0C, 0x12),
_INIT_DCS_CMD(0x0D, 0x11),
_INIT_DCS_CMD(0x0E, 0x10),
_INIT_DCS_CMD(0x0F, 0x0F),
_INIT_DCS_CMD(0x10, 0x0E),
_INIT_DCS_CMD(0x11, 0x0D),
_INIT_DCS_CMD(0x12, 0x0C),
_INIT_DCS_CMD(0x13, 0x04),
_INIT_DCS_CMD(0x14, 0x03),
_INIT_DCS_CMD(0x15, 0x03),
_INIT_DCS_CMD(0x16, 0x03),
_INIT_DCS_CMD(0x17, 0x03),
_INIT_DCS_CMD(0x18, 0x03),
_INIT_DCS_CMD(0x19, 0x03),
_INIT_DCS_CMD(0x1A, 0x03),
_INIT_DCS_CMD(0x1B, 0x03),
_INIT_DCS_CMD(0x1C, 0x22),
_INIT_DCS_CMD(0x1D, 0x06),
_INIT_DCS_CMD(0x1E, 0x00),
_INIT_DCS_CMD(0x1F, 0x1D),
_INIT_DCS_CMD(0x20, 0x1C),
_INIT_DCS_CMD(0x21, 0x13),
_INIT_DCS_CMD(0x22, 0x12),
_INIT_DCS_CMD(0x23, 0x11),
_INIT_DCS_CMD(0x24, 0x10),
_INIT_DCS_CMD(0x25, 0x0F),
_INIT_DCS_CMD(0x26, 0x0E),
_INIT_DCS_CMD(0x27, 0x0D),
_INIT_DCS_CMD(0x28, 0x0C),
_INIT_DCS_CMD(0x29, 0x04),
_INIT_DCS_CMD(0x2A, 0x03),
_INIT_DCS_CMD(0x2B, 0x03),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x2F, 0x05),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x30, 0x32),
_INIT_DCS_CMD(0x31, 0x43),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x33, 0x05),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x34, 0x32),
_INIT_DCS_CMD(0x35, 0x43),
_INIT_DCS_CMD(0x37, 0x44),
_INIT_DCS_CMD(0x38, 0x40),
_INIT_DCS_CMD(0x39, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x3A, 0x18),
_INIT_DCS_CMD(0x3B, 0x00),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x3D, 0x93),
_INIT_DCS_CMD(0xAB, 0x44),
_INIT_DCS_CMD(0xAC, 0x40),
_INIT_DCS_CMD(0x4D, 0x21),
_INIT_DCS_CMD(0x4E, 0x43),
_INIT_DCS_CMD(0x4F, 0x65),
_INIT_DCS_CMD(0x50, 0x87),
_INIT_DCS_CMD(0x51, 0x78),
_INIT_DCS_CMD(0x52, 0x56),
_INIT_DCS_CMD(0x53, 0x34),
_INIT_DCS_CMD(0x54, 0x21),
_INIT_DCS_CMD(0x55, 0x83),
_INIT_DCS_CMD(0x56, 0x08),
_INIT_DCS_CMD(0x58, 0x21),
_INIT_DCS_CMD(0x59, 0x40),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x5A, 0x00),
_INIT_DCS_CMD(0x5B, 0x2C),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x5E, 0x00, 0x10),
_INIT_DCS_CMD(0x5F, 0x00),
_INIT_DCS_CMD(0x7A, 0x00),
_INIT_DCS_CMD(0x7B, 0x00),
_INIT_DCS_CMD(0x7C, 0x00),
_INIT_DCS_CMD(0x7D, 0x00),
_INIT_DCS_CMD(0x7E, 0x20),
_INIT_DCS_CMD(0x7F, 0x3C),
_INIT_DCS_CMD(0x80, 0x00),
_INIT_DCS_CMD(0x81, 0x00),
_INIT_DCS_CMD(0x82, 0x08),
_INIT_DCS_CMD(0x97, 0x02),
_INIT_DCS_CMD(0xC5, 0x10),
_INIT_DCS_CMD(0xDA, 0x05),
_INIT_DCS_CMD(0xDB, 0x01),
_INIT_DCS_CMD(0xDC, 0x7A),
_INIT_DCS_CMD(0xDD, 0x55),
_INIT_DCS_CMD(0xDE, 0x27),
_INIT_DCS_CMD(0xDF, 0x01),
_INIT_DCS_CMD(0xE0, 0x7A),
_INIT_DCS_CMD(0xE1, 0x01),
_INIT_DCS_CMD(0xE2, 0x7A),
_INIT_DCS_CMD(0xE3, 0x01),
_INIT_DCS_CMD(0xE4, 0x7A),
_INIT_DCS_CMD(0xE5, 0x01),
_INIT_DCS_CMD(0xE6, 0x7A),
_INIT_DCS_CMD(0xE7, 0x00),
_INIT_DCS_CMD(0xE8, 0x00),
_INIT_DCS_CMD(0xE9, 0x01),
_INIT_DCS_CMD(0xEA, 0x7A),
_INIT_DCS_CMD(0xEB, 0x01),
_INIT_DCS_CMD(0xEE, 0x7A),
_INIT_DCS_CMD(0xEF, 0x01),
_INIT_DCS_CMD(0xF0, 0x7A),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0xB6, 0x05, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x05, 0x00, 0x00),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0x25),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x05, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x13, 0x02),
_INIT_DCS_CMD(0x14, 0xDF),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xF1, 0x10),
_INIT_DCS_CMD(0x1E, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x1F, 0x00),
_INIT_DCS_CMD(0x20, 0x2C),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x25, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x26, 0x00),
_INIT_DCS_CMD(0x27, 0x2C),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x3F, 0x80),
_INIT_DCS_CMD(0x40, 0x00),
_INIT_DCS_CMD(0x43, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x44, 0x18),
_INIT_DCS_CMD(0x45, 0x00),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x48, 0x00),
_INIT_DCS_CMD(0x49, 0x2C),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x5B, 0x80),
_INIT_DCS_CMD(0x5C, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x5D, 0x00),
_INIT_DCS_CMD(0x5E, 0x00),
_INIT_DCS_CMD(0x61, 0x00),
_INIT_DCS_CMD(0x62, 0x2C),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0x68, 0x10),
_INIT_DCS_CMD(0xFF, 0x26),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0xA1),
_INIT_DCS_CMD(0x02, 0x31),
_INIT_DCS_CMD(0x0A, 0xF2),
_INIT_DCS_CMD(0x04, 0x28),
_INIT_DCS_CMD(0x06, 0x30),
_INIT_DCS_CMD(0x0C, 0x16),
_INIT_DCS_CMD(0x0D, 0x0D),
_INIT_DCS_CMD(0x0F, 0x00),
_INIT_DCS_CMD(0x11, 0x00),
_INIT_DCS_CMD(0x12, 0x50),
_INIT_DCS_CMD(0x13, 0x56),
_INIT_DCS_CMD(0x14, 0x57),
_INIT_DCS_CMD(0x15, 0x00),
_INIT_DCS_CMD(0x16, 0x10),
_INIT_DCS_CMD(0x17, 0xA0),
_INIT_DCS_CMD(0x18, 0x86),
_INIT_DCS_CMD(0x22, 0x00),
_INIT_DCS_CMD(0x23, 0x00),
_INIT_DCS_CMD(0x19, 0x0D),
_INIT_DCS_CMD(0x1A, 0x7F),
_INIT_DCS_CMD(0x1B, 0x0C),
_INIT_DCS_CMD(0x1C, 0xBF),
_INIT_DCS_CMD(0x2A, 0x0D),
_INIT_DCS_CMD(0x2B, 0x7F),
_INIT_DCS_CMD(0x20, 0x00),
_INIT_DCS_CMD(0x1D, 0x00),
_INIT_DCS_CMD(0x1E, 0x78),
_INIT_DCS_CMD(0x1F, 0x78),
_INIT_DCS_CMD(0x2F, 0x03),
_INIT_DCS_CMD(0x30, 0x78),
_INIT_DCS_CMD(0x33, 0x78),
_INIT_DCS_CMD(0x34, 0x66),
_INIT_DCS_CMD(0x35, 0x11),
_INIT_DCS_CMD(0x39, 0x10),
_INIT_DCS_CMD(0x3A, 0x78),
_INIT_DCS_CMD(0x3B, 0x06),
_INIT_DCS_CMD(0xC8, 0x04),
_INIT_DCS_CMD(0xC9, 0x84),
_INIT_DCS_CMD(0xCA, 0x4E),
_INIT_DCS_CMD(0xCB, 0x00),
_INIT_DCS_CMD(0xA9, 0x50),
_INIT_DCS_CMD(0xAA, 0x4F),
_INIT_DCS_CMD(0xAB, 0x4D),
_INIT_DCS_CMD(0xAC, 0x4A),
_INIT_DCS_CMD(0xAD, 0x48),
_INIT_DCS_CMD(0xAE, 0x46),
_INIT_DCS_CMD(0xFF, 0x27),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0xC0, 0x18),
_INIT_DCS_CMD(0xC1, 0x00),
_INIT_DCS_CMD(0xC2, 0x00),
_INIT_DCS_CMD(0x56, 0x06),
_INIT_DCS_CMD(0x58, 0x80),
_INIT_DCS_CMD(0x59, 0x75),
_INIT_DCS_CMD(0x5A, 0x00),
_INIT_DCS_CMD(0x5B, 0x02),
_INIT_DCS_CMD(0x5C, 0x00),
_INIT_DCS_CMD(0x5D, 0x00),
_INIT_DCS_CMD(0x5E, 0x20),
_INIT_DCS_CMD(0x5F, 0x10),
_INIT_DCS_CMD(0x60, 0x00),
_INIT_DCS_CMD(0x61, 0x2E),
_INIT_DCS_CMD(0x62, 0x00),
_INIT_DCS_CMD(0x63, 0x01),
_INIT_DCS_CMD(0x64, 0x43),
_INIT_DCS_CMD(0x65, 0x2D),
_INIT_DCS_CMD(0x66, 0x00),
_INIT_DCS_CMD(0x67, 0x01),
_INIT_DCS_CMD(0x68, 0x43),
_INIT_DCS_CMD(0x98, 0x01),
_INIT_DCS_CMD(0xB4, 0x03),
_INIT_DCS_CMD(0x9B, 0xBD),
_INIT_DCS_CMD(0xA0, 0x90),
_INIT_DCS_CMD(0xAB, 0x1B),
_INIT_DCS_CMD(0xBC, 0x0C),
_INIT_DCS_CMD(0xBD, 0x28),
_INIT_DCS_CMD(0xFF, 0x2A),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x22, 0x2F),
_INIT_DCS_CMD(0x23, 0x08),
_INIT_DCS_CMD(0x24, 0x00),
_INIT_DCS_CMD(0x25, 0x65),
_INIT_DCS_CMD(0x26, 0xF8),
_INIT_DCS_CMD(0x27, 0x00),
_INIT_DCS_CMD(0x28, 0x1A),
_INIT_DCS_CMD(0x29, 0x00),
_INIT_DCS_CMD(0x2A, 0x1A),
_INIT_DCS_CMD(0x2B, 0x00),
_INIT_DCS_CMD(0x2D, 0x1A),
_INIT_DCS_CMD(0x64, 0x96),
_INIT_DCS_CMD(0x65, 0x00),
_INIT_DCS_CMD(0x66, 0x00),
_INIT_DCS_CMD(0x6A, 0x96),
_INIT_DCS_CMD(0x6B, 0x00),
_INIT_DCS_CMD(0x6C, 0x00),
_INIT_DCS_CMD(0x70, 0x92),
_INIT_DCS_CMD(0x71, 0x00),
_INIT_DCS_CMD(0x72, 0x00),
_INIT_DCS_CMD(0xA2, 0x33),
_INIT_DCS_CMD(0xA3, 0x30),
_INIT_DCS_CMD(0xA4, 0xC0),
_INIT_DCS_CMD(0xE8, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0x97, 0x3C),
_INIT_DCS_CMD(0x98, 0x02),
_INIT_DCS_CMD(0x99, 0x95),
_INIT_DCS_CMD(0x9A, 0x06),
_INIT_DCS_CMD(0x9B, 0x00),
_INIT_DCS_CMD(0x9C, 0x0B),
_INIT_DCS_CMD(0x9D, 0x0A),
_INIT_DCS_CMD(0x9E, 0x90),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0xF0),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x3A, 0x08),
_INIT_DCS_CMD(0xFF, 0xD0),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0x33),
_INIT_DCS_CMD(0x08, 0x01),
_INIT_DCS_CMD(0x09, 0xBF),
_INIT_DCS_CMD(0x2F, 0x33),
_INIT_DCS_CMD(0xFF, 0x23),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x00, 0x80),
_INIT_DCS_CMD(0x07, 0x00),
_INIT_DCS_CMD(0xFF, 0x20),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0x30, 0x00),
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
_INIT_DCS_CMD(0xFF, 0x24),
_INIT_DCS_CMD(0x5C, 0x88),
_INIT_DCS_CMD(0x5D, 0x08),
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
_INIT_DCS_CMD(0xFF, 0x10),
_INIT_DCS_CMD(0xB9, 0x01),
_INIT_DCS_CMD(0xFF, 0x20),
_INIT_DCS_CMD(0x18, 0x40),
_INIT_DCS_CMD(0xFF, 0x10),
_INIT_DCS_CMD(0xB9, 0x02),
_INIT_DCS_CMD(0xFF, 0x10),
_INIT_DCS_CMD(0xFB, 0x01),
_INIT_DCS_CMD(0xBB, 0x13),
_INIT_DCS_CMD(0x3B, 0x03, 0x96, 0x1A, 0x04, 0x04),
_INIT_DCS_CMD(0x35, 0x00),
_INIT_DCS_CMD(0x51, 0x0F, 0xFF),
_INIT_DCS_CMD(0x53, 0x24),
_INIT_DELAY_CMD(100),
_INIT_DCS_CMD(0x11),
_INIT_DELAY_CMD(200),
_INIT_DCS_CMD(0x29),
_INIT_DELAY_CMD(100),
{},
};
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
static const struct panel_init_cmd boe_init_cmd[] = {
_INIT_DELAY_CMD(24),
_INIT_DCS_CMD(0xB0, 0x05),
_INIT_DCS_CMD(0xB1, 0xE5),
_INIT_DCS_CMD(0xB3, 0x52),
_INIT_DCS_CMD(0xB0, 0x00),
_INIT_DCS_CMD(0xB3, 0x88),
_INIT_DCS_CMD(0xB0, 0x04),
_INIT_DCS_CMD(0xB8, 0x00),
_INIT_DCS_CMD(0xB0, 0x00),
_INIT_DCS_CMD(0xB6, 0x03),
_INIT_DCS_CMD(0xBA, 0x8B),
_INIT_DCS_CMD(0xBF, 0x1A),
_INIT_DCS_CMD(0xC0, 0x0F),
_INIT_DCS_CMD(0xC2, 0x0C),
_INIT_DCS_CMD(0xC3, 0x02),
_INIT_DCS_CMD(0xC4, 0x0C),
_INIT_DCS_CMD(0xC5, 0x02),
_INIT_DCS_CMD(0xB0, 0x01),
_INIT_DCS_CMD(0xE0, 0x26),
_INIT_DCS_CMD(0xE1, 0x26),
_INIT_DCS_CMD(0xDC, 0x00),
_INIT_DCS_CMD(0xDD, 0x00),
_INIT_DCS_CMD(0xCC, 0x26),
_INIT_DCS_CMD(0xCD, 0x26),
_INIT_DCS_CMD(0xC8, 0x00),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xD2, 0x03),
_INIT_DCS_CMD(0xD3, 0x03),
_INIT_DCS_CMD(0xE6, 0x04),
_INIT_DCS_CMD(0xE7, 0x04),
_INIT_DCS_CMD(0xC4, 0x09),
_INIT_DCS_CMD(0xC5, 0x09),
_INIT_DCS_CMD(0xD8, 0x0A),
_INIT_DCS_CMD(0xD9, 0x0A),
_INIT_DCS_CMD(0xC2, 0x0B),
_INIT_DCS_CMD(0xC3, 0x0B),
_INIT_DCS_CMD(0xD6, 0x0C),
_INIT_DCS_CMD(0xD7, 0x0C),
_INIT_DCS_CMD(0xC0, 0x05),
_INIT_DCS_CMD(0xC1, 0x05),
_INIT_DCS_CMD(0xD4, 0x06),
_INIT_DCS_CMD(0xD5, 0x06),
_INIT_DCS_CMD(0xCA, 0x07),
_INIT_DCS_CMD(0xCB, 0x07),
_INIT_DCS_CMD(0xDE, 0x08),
_INIT_DCS_CMD(0xDF, 0x08),
_INIT_DCS_CMD(0xB0, 0x02),
_INIT_DCS_CMD(0xC0, 0x00),
_INIT_DCS_CMD(0xC1, 0x0D),
_INIT_DCS_CMD(0xC2, 0x17),
_INIT_DCS_CMD(0xC3, 0x26),
_INIT_DCS_CMD(0xC4, 0x31),
_INIT_DCS_CMD(0xC5, 0x1C),
_INIT_DCS_CMD(0xC6, 0x2C),
_INIT_DCS_CMD(0xC7, 0x33),
_INIT_DCS_CMD(0xC8, 0x31),
_INIT_DCS_CMD(0xC9, 0x37),
_INIT_DCS_CMD(0xCA, 0x37),
_INIT_DCS_CMD(0xCB, 0x37),
_INIT_DCS_CMD(0xCC, 0x39),
_INIT_DCS_CMD(0xCD, 0x2E),
_INIT_DCS_CMD(0xCE, 0x2F),
_INIT_DCS_CMD(0xCF, 0x2F),
_INIT_DCS_CMD(0xD0, 0x07),
_INIT_DCS_CMD(0xD2, 0x00),
_INIT_DCS_CMD(0xD3, 0x0D),
_INIT_DCS_CMD(0xD4, 0x17),
_INIT_DCS_CMD(0xD5, 0x26),
_INIT_DCS_CMD(0xD6, 0x31),
_INIT_DCS_CMD(0xD7, 0x3F),
_INIT_DCS_CMD(0xD8, 0x3F),
_INIT_DCS_CMD(0xD9, 0x3F),
_INIT_DCS_CMD(0xDA, 0x3F),
_INIT_DCS_CMD(0xDB, 0x37),
_INIT_DCS_CMD(0xDC, 0x37),
_INIT_DCS_CMD(0xDD, 0x37),
_INIT_DCS_CMD(0xDE, 0x39),
_INIT_DCS_CMD(0xDF, 0x2E),
_INIT_DCS_CMD(0xE0, 0x2F),
_INIT_DCS_CMD(0xE1, 0x2F),
_INIT_DCS_CMD(0xE2, 0x07),
_INIT_DCS_CMD(0xB0, 0x03),
_INIT_DCS_CMD(0xC8, 0x0B),
_INIT_DCS_CMD(0xC9, 0x07),
_INIT_DCS_CMD(0xC3, 0x00),
_INIT_DCS_CMD(0xE7, 0x00),
_INIT_DCS_CMD(0xC5, 0x2A),
_INIT_DCS_CMD(0xDE, 0x2A),
_INIT_DCS_CMD(0xCA, 0x43),
_INIT_DCS_CMD(0xC9, 0x07),
_INIT_DCS_CMD(0xE4, 0xC0),
_INIT_DCS_CMD(0xE5, 0x0D),
_INIT_DCS_CMD(0xCB, 0x00),
_INIT_DCS_CMD(0xB0, 0x06),
_INIT_DCS_CMD(0xB8, 0xA5),
_INIT_DCS_CMD(0xC0, 0xA5),
_INIT_DCS_CMD(0xC7, 0x0F),
_INIT_DCS_CMD(0xD5, 0x32),
_INIT_DCS_CMD(0xB8, 0x00),
_INIT_DCS_CMD(0xC0, 0x00),
_INIT_DCS_CMD(0xBC, 0x00),
_INIT_DCS_CMD(0xB0, 0x07),
_INIT_DCS_CMD(0xB1, 0x00),
_INIT_DCS_CMD(0xB2, 0x02),
_INIT_DCS_CMD(0xB3, 0x0F),
_INIT_DCS_CMD(0xB4, 0x25),
_INIT_DCS_CMD(0xB5, 0x39),
_INIT_DCS_CMD(0xB6, 0x4E),
_INIT_DCS_CMD(0xB7, 0x72),
_INIT_DCS_CMD(0xB8, 0x97),
_INIT_DCS_CMD(0xB9, 0xDC),
_INIT_DCS_CMD(0xBA, 0x22),
_INIT_DCS_CMD(0xBB, 0xA4),
_INIT_DCS_CMD(0xBC, 0x2B),
_INIT_DCS_CMD(0xBD, 0x2F),
_INIT_DCS_CMD(0xBE, 0xA9),
_INIT_DCS_CMD(0xBF, 0x25),
_INIT_DCS_CMD(0xC0, 0x61),
_INIT_DCS_CMD(0xC1, 0x97),
_INIT_DCS_CMD(0xC2, 0xB2),
_INIT_DCS_CMD(0xC3, 0xCD),
_INIT_DCS_CMD(0xC4, 0xD9),
_INIT_DCS_CMD(0xC5, 0xE7),
_INIT_DCS_CMD(0xC6, 0xF4),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x08),
_INIT_DCS_CMD(0xB1, 0x04),
_INIT_DCS_CMD(0xB2, 0x05),
_INIT_DCS_CMD(0xB3, 0x11),
_INIT_DCS_CMD(0xB4, 0x24),
_INIT_DCS_CMD(0xB5, 0x39),
_INIT_DCS_CMD(0xB6, 0x4F),
_INIT_DCS_CMD(0xB7, 0x72),
_INIT_DCS_CMD(0xB8, 0x98),
_INIT_DCS_CMD(0xB9, 0xDC),
_INIT_DCS_CMD(0xBA, 0x23),
_INIT_DCS_CMD(0xBB, 0xA6),
_INIT_DCS_CMD(0xBC, 0x2C),
_INIT_DCS_CMD(0xBD, 0x30),
_INIT_DCS_CMD(0xBE, 0xAA),
_INIT_DCS_CMD(0xBF, 0x26),
_INIT_DCS_CMD(0xC0, 0x62),
_INIT_DCS_CMD(0xC1, 0x9B),
_INIT_DCS_CMD(0xC2, 0xB5),
_INIT_DCS_CMD(0xC3, 0xCF),
_INIT_DCS_CMD(0xC4, 0xDB),
_INIT_DCS_CMD(0xC5, 0xE8),
_INIT_DCS_CMD(0xC6, 0xF5),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x09),
_INIT_DCS_CMD(0xB1, 0x04),
_INIT_DCS_CMD(0xB2, 0x02),
_INIT_DCS_CMD(0xB3, 0x16),
_INIT_DCS_CMD(0xB4, 0x24),
_INIT_DCS_CMD(0xB5, 0x3B),
_INIT_DCS_CMD(0xB6, 0x4F),
_INIT_DCS_CMD(0xB7, 0x73),
_INIT_DCS_CMD(0xB8, 0x99),
_INIT_DCS_CMD(0xB9, 0xE0),
_INIT_DCS_CMD(0xBA, 0x26),
_INIT_DCS_CMD(0xBB, 0xAD),
_INIT_DCS_CMD(0xBC, 0x36),
_INIT_DCS_CMD(0xBD, 0x3A),
_INIT_DCS_CMD(0xBE, 0xAE),
_INIT_DCS_CMD(0xBF, 0x2A),
_INIT_DCS_CMD(0xC0, 0x66),
_INIT_DCS_CMD(0xC1, 0x9E),
_INIT_DCS_CMD(0xC2, 0xB8),
_INIT_DCS_CMD(0xC3, 0xD1),
_INIT_DCS_CMD(0xC4, 0xDD),
_INIT_DCS_CMD(0xC5, 0xE9),
_INIT_DCS_CMD(0xC6, 0xF6),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x0A),
_INIT_DCS_CMD(0xB1, 0x00),
_INIT_DCS_CMD(0xB2, 0x02),
_INIT_DCS_CMD(0xB3, 0x0F),
_INIT_DCS_CMD(0xB4, 0x25),
_INIT_DCS_CMD(0xB5, 0x39),
_INIT_DCS_CMD(0xB6, 0x4E),
_INIT_DCS_CMD(0xB7, 0x72),
_INIT_DCS_CMD(0xB8, 0x97),
_INIT_DCS_CMD(0xB9, 0xDC),
_INIT_DCS_CMD(0xBA, 0x22),
_INIT_DCS_CMD(0xBB, 0xA4),
_INIT_DCS_CMD(0xBC, 0x2B),
_INIT_DCS_CMD(0xBD, 0x2F),
_INIT_DCS_CMD(0xBE, 0xA9),
_INIT_DCS_CMD(0xBF, 0x25),
_INIT_DCS_CMD(0xC0, 0x61),
_INIT_DCS_CMD(0xC1, 0x97),
_INIT_DCS_CMD(0xC2, 0xB2),
_INIT_DCS_CMD(0xC3, 0xCD),
_INIT_DCS_CMD(0xC4, 0xD9),
_INIT_DCS_CMD(0xC5, 0xE7),
_INIT_DCS_CMD(0xC6, 0xF4),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x0B),
_INIT_DCS_CMD(0xB1, 0x04),
_INIT_DCS_CMD(0xB2, 0x05),
_INIT_DCS_CMD(0xB3, 0x11),
_INIT_DCS_CMD(0xB4, 0x24),
_INIT_DCS_CMD(0xB5, 0x39),
_INIT_DCS_CMD(0xB6, 0x4F),
_INIT_DCS_CMD(0xB7, 0x72),
_INIT_DCS_CMD(0xB8, 0x98),
_INIT_DCS_CMD(0xB9, 0xDC),
_INIT_DCS_CMD(0xBA, 0x23),
_INIT_DCS_CMD(0xBB, 0xA6),
_INIT_DCS_CMD(0xBC, 0x2C),
_INIT_DCS_CMD(0xBD, 0x30),
_INIT_DCS_CMD(0xBE, 0xAA),
_INIT_DCS_CMD(0xBF, 0x26),
_INIT_DCS_CMD(0xC0, 0x62),
_INIT_DCS_CMD(0xC1, 0x9B),
_INIT_DCS_CMD(0xC2, 0xB5),
_INIT_DCS_CMD(0xC3, 0xCF),
_INIT_DCS_CMD(0xC4, 0xDB),
_INIT_DCS_CMD(0xC5, 0xE8),
_INIT_DCS_CMD(0xC6, 0xF5),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x0C),
_INIT_DCS_CMD(0xB1, 0x04),
_INIT_DCS_CMD(0xB2, 0x02),
_INIT_DCS_CMD(0xB3, 0x16),
_INIT_DCS_CMD(0xB4, 0x24),
_INIT_DCS_CMD(0xB5, 0x3B),
_INIT_DCS_CMD(0xB6, 0x4F),
_INIT_DCS_CMD(0xB7, 0x73),
_INIT_DCS_CMD(0xB8, 0x99),
_INIT_DCS_CMD(0xB9, 0xE0),
_INIT_DCS_CMD(0xBA, 0x26),
_INIT_DCS_CMD(0xBB, 0xAD),
_INIT_DCS_CMD(0xBC, 0x36),
_INIT_DCS_CMD(0xBD, 0x3A),
_INIT_DCS_CMD(0xBE, 0xAE),
_INIT_DCS_CMD(0xBF, 0x2A),
_INIT_DCS_CMD(0xC0, 0x66),
_INIT_DCS_CMD(0xC1, 0x9E),
_INIT_DCS_CMD(0xC2, 0xB8),
_INIT_DCS_CMD(0xC3, 0xD1),
_INIT_DCS_CMD(0xC4, 0xDD),
_INIT_DCS_CMD(0xC5, 0xE9),
_INIT_DCS_CMD(0xC6, 0xF6),
_INIT_DCS_CMD(0xC7, 0xFA),
_INIT_DCS_CMD(0xC8, 0xFC),
_INIT_DCS_CMD(0xC9, 0x00),
_INIT_DCS_CMD(0xCA, 0x00),
_INIT_DCS_CMD(0xCB, 0x16),
_INIT_DCS_CMD(0xCC, 0xAF),
_INIT_DCS_CMD(0xCD, 0xFF),
_INIT_DCS_CMD(0xCE, 0xFF),
_INIT_DCS_CMD(0xB0, 0x00),
_INIT_DCS_CMD(0xB3, 0x08),
_INIT_DCS_CMD(0xB0, 0x04),
_INIT_DCS_CMD(0xB8, 0x68),
_INIT_DELAY_CMD(150),
{},
};
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
_INIT_DELAY_CMD(24),
_INIT_DCS_CMD(0x11),
_INIT_DELAY_CMD(120),
_INIT_DCS_CMD(0x29),
_INIT_DELAY_CMD(120),
{},
};
drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com
2020-01-16 10:15:11 +08:00
static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = {
_INIT_DELAY_CMD(24),
_INIT_DCS_CMD(0xB0, 0x01),
_INIT_DCS_CMD(0xC0, 0x48),
_INIT_DCS_CMD(0xC1, 0x48),
_INIT_DCS_CMD(0xC2, 0x47),
_INIT_DCS_CMD(0xC3, 0x47),
_INIT_DCS_CMD(0xC4, 0x46),
_INIT_DCS_CMD(0xC5, 0x46),
_INIT_DCS_CMD(0xC6, 0x45),
_INIT_DCS_CMD(0xC7, 0x45),
_INIT_DCS_CMD(0xC8, 0x64),
_INIT_DCS_CMD(0xC9, 0x64),
_INIT_DCS_CMD(0xCA, 0x4F),
_INIT_DCS_CMD(0xCB, 0x4F),
_INIT_DCS_CMD(0xCC, 0x40),
_INIT_DCS_CMD(0xCD, 0x40),
_INIT_DCS_CMD(0xCE, 0x66),
_INIT_DCS_CMD(0xCF, 0x66),
_INIT_DCS_CMD(0xD0, 0x4F),
_INIT_DCS_CMD(0xD1, 0x4F),
_INIT_DCS_CMD(0xD2, 0x41),
_INIT_DCS_CMD(0xD3, 0x41),
_INIT_DCS_CMD(0xD4, 0x48),
_INIT_DCS_CMD(0xD5, 0x48),
_INIT_DCS_CMD(0xD6, 0x47),
_INIT_DCS_CMD(0xD7, 0x47),
_INIT_DCS_CMD(0xD8, 0x46),
_INIT_DCS_CMD(0xD9, 0x46),
_INIT_DCS_CMD(0xDA, 0x45),
_INIT_DCS_CMD(0xDB, 0x45),
_INIT_DCS_CMD(0xDC, 0x64),
_INIT_DCS_CMD(0xDD, 0x64),
_INIT_DCS_CMD(0xDE, 0x4F),
_INIT_DCS_CMD(0xDF, 0x4F),
_INIT_DCS_CMD(0xE0, 0x40),
_INIT_DCS_CMD(0xE1, 0x40),
_INIT_DCS_CMD(0xE2, 0x66),
_INIT_DCS_CMD(0xE3, 0x66),
_INIT_DCS_CMD(0xE4, 0x4F),
_INIT_DCS_CMD(0xE5, 0x4F),
_INIT_DCS_CMD(0xE6, 0x41),
_INIT_DCS_CMD(0xE7, 0x41),
_INIT_DELAY_CMD(150),
{},
};
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
{
return container_of(panel, struct boe_panel, base);
}
static int boe_panel_init_dcs_cmd(struct boe_panel *boe)
{
struct mipi_dsi_device *dsi = boe->dsi;
struct drm_panel *panel = &boe->base;
int i, err = 0;
if (boe->desc->init_cmds) {
const struct panel_init_cmd *init_cmds = boe->desc->init_cmds;
for (i = 0; init_cmds[i].len != 0; i++) {
const struct panel_init_cmd *cmd = &init_cmds[i];
switch (cmd->type) {
case DELAY_CMD:
msleep(cmd->data[0]);
err = 0;
break;
case INIT_DCS_CMD:
err = mipi_dsi_dcs_write(dsi, cmd->data[0],
cmd->len <= 1 ? NULL :
&cmd->data[1],
cmd->len - 1);
break;
default:
err = -EINVAL;
}
if (err < 0) {
dev_err(panel->dev,
"failed to write command %u\n", i);
return err;
}
}
}
return 0;
}
static int boe_panel_enter_sleep_mode(struct boe_panel *boe)
{
struct mipi_dsi_device *dsi = boe->dsi;
int ret;
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0)
return ret;
return 0;
}
static int boe_panel_unprepare(struct drm_panel *panel)
{
struct boe_panel *boe = to_boe_panel(panel);
int ret;
if (!boe->prepared)
return 0;
ret = boe_panel_enter_sleep_mode(boe);
if (ret < 0) {
dev_err(panel->dev, "failed to set panel off: %d\n", ret);
return ret;
}
msleep(150);
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
if (boe->desc->discharge_on_disable) {
regulator_disable(boe->avee);
regulator_disable(boe->avdd);
usleep_range(5000, 7000);
gpiod_set_value(boe->enable_gpio, 0);
usleep_range(5000, 7000);
regulator_disable(boe->pp1800);
drm/panel: boe-tv101wum-nl6: Support enabling a 3.3V rail The auo,b101uan08.3 panel (already supported by this driver) has a 3.3V rail that needs to be turned on. For previous users of this panel this voltage was directly output by pmic. On a new user (the not-yet-upstream sc7180-trogdor-mrbland board) we need to turn the 3.3V rail on. Add support in the driver for this. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:49 +08:00
regulator_disable(boe->pp3300);
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
} else {
gpiod_set_value(boe->enable_gpio, 0);
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
usleep_range(1000, 2000);
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
regulator_disable(boe->avee);
regulator_disable(boe->avdd);
usleep_range(5000, 7000);
regulator_disable(boe->pp1800);
drm/panel: boe-tv101wum-nl6: Support enabling a 3.3V rail The auo,b101uan08.3 panel (already supported by this driver) has a 3.3V rail that needs to be turned on. For previous users of this panel this voltage was directly output by pmic. On a new user (the not-yet-upstream sc7180-trogdor-mrbland board) we need to turn the 3.3V rail on. Add support in the driver for this. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:49 +08:00
regulator_disable(boe->pp3300);
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
}
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
boe->prepared = false;
return 0;
}
static int boe_panel_prepare(struct drm_panel *panel)
{
struct boe_panel *boe = to_boe_panel(panel);
int ret;
if (boe->prepared)
return 0;
gpiod_set_value(boe->enable_gpio, 0);
usleep_range(1000, 1500);
drm/panel: boe-tv101wum-nl6: Support enabling a 3.3V rail The auo,b101uan08.3 panel (already supported by this driver) has a 3.3V rail that needs to be turned on. For previous users of this panel this voltage was directly output by pmic. On a new user (the not-yet-upstream sc7180-trogdor-mrbland board) we need to turn the 3.3V rail on. Add support in the driver for this. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:49 +08:00
ret = regulator_enable(boe->pp3300);
if (ret < 0)
return ret;
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
ret = regulator_enable(boe->pp1800);
if (ret < 0)
return ret;
usleep_range(3000, 5000);
ret = regulator_enable(boe->avdd);
if (ret < 0)
goto poweroff1v8;
ret = regulator_enable(boe->avee);
if (ret < 0)
goto poweroffavdd;
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
usleep_range(10000, 11000);
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
gpiod_set_value(boe->enable_gpio, 1);
usleep_range(1000, 2000);
gpiod_set_value(boe->enable_gpio, 0);
usleep_range(1000, 2000);
gpiod_set_value(boe->enable_gpio, 1);
usleep_range(6000, 10000);
ret = boe_panel_init_dcs_cmd(boe);
if (ret < 0) {
dev_err(panel->dev, "failed to init panel: %d\n", ret);
goto poweroff;
}
boe->prepared = true;
return 0;
poweroff:
regulator_disable(boe->avee);
poweroffavdd:
regulator_disable(boe->avdd);
poweroff1v8:
usleep_range(5000, 7000);
regulator_disable(boe->pp1800);
gpiod_set_value(boe->enable_gpio, 0);
return ret;
}
static int boe_panel_enable(struct drm_panel *panel)
{
msleep(130);
return 0;
}
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
static const struct drm_display_mode boe_tv110c9m_default_mode = {
.clock = 166594,
.hdisplay = 1200,
.hsync_start = 1200 + 40,
.hsync_end = 1200 + 40 + 8,
.htotal = 1200 + 40 + 8 + 28,
.vdisplay = 2000,
.vsync_start = 2000 + 26,
.vsync_end = 2000 + 26 + 2,
.vtotal = 2000 + 26 + 2 + 148,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct panel_desc boe_tv110c9m_desc = {
.modes = &boe_tv110c9m_default_mode,
.bpc = 8,
.size = {
.width_mm = 143,
.height_mm = 238,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO
| MIPI_DSI_MODE_VIDEO_HSE
| MIPI_DSI_CLOCK_NON_CONTINUOUS
| MIPI_DSI_MODE_VIDEO_BURST,
.init_cmds = boe_tv110c9m_init_cmd,
};
static const struct drm_display_mode inx_hj110iz_default_mode = {
.clock = 166594,
.hdisplay = 1200,
.hsync_start = 1200 + 40,
.hsync_end = 1200 + 40 + 8,
.htotal = 1200 + 40 + 8 + 28,
.vdisplay = 2000,
.vsync_start = 2000 + 26,
.vsync_end = 2000 + 26 + 1,
.vtotal = 2000 + 26 + 1 + 149,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct panel_desc inx_hj110iz_desc = {
.modes = &inx_hj110iz_default_mode,
.bpc = 8,
.size = {
.width_mm = 143,
.height_mm = 238,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_VIDEO
| MIPI_DSI_MODE_VIDEO_HSE
| MIPI_DSI_CLOCK_NON_CONTINUOUS
| MIPI_DSI_MODE_VIDEO_BURST,
drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial code At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-01 10:32:30 +08:00
.init_cmds = inx_hj110iz_init_cmd,
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
};
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
static const struct drm_display_mode boe_tv101wum_nl6_default_mode = {
.clock = 159425,
.hdisplay = 1200,
.hsync_start = 1200 + 100,
.hsync_end = 1200 + 100 + 40,
.htotal = 1200 + 100 + 40 + 24,
.vdisplay = 1920,
.vsync_start = 1920 + 10,
.vsync_end = 1920 + 10 + 14,
.vtotal = 1920 + 10 + 14 + 4,
};
static const struct panel_desc boe_tv101wum_nl6_desc = {
.modes = &boe_tv101wum_nl6_default_mode,
.bpc = 8,
.size = {
.width_mm = 135,
.height_mm = 216,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = boe_init_cmd,
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
.discharge_on_disable = false,
};
static const struct drm_display_mode auo_kd101n80_45na_default_mode = {
.clock = 157000,
.hdisplay = 1200,
drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel Fine tune the HBP and HFP to avoid the dot noise on the left and right edges. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200714123332.37609-1-jitao.shi@mediatek.com
2020-07-14 20:33:32 +08:00
.hsync_start = 1200 + 60,
.hsync_end = 1200 + 60 + 24,
.htotal = 1200 + 60 + 24 + 56,
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
.vdisplay = 1920,
.vsync_start = 1920 + 16,
.vsync_end = 1920 + 16 + 4,
.vtotal = 1920 + 16 + 4 + 16,
};
static const struct panel_desc auo_kd101n80_45na_desc = {
.modes = &auo_kd101n80_45na_default_mode,
.bpc = 8,
.size = {
.width_mm = 135,
.height_mm = 216,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = auo_kd101n80_45na_init_cmd,
.discharge_on_disable = true,
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
};
drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com
2020-01-16 10:15:10 +08:00
static const struct drm_display_mode boe_tv101wum_n53_default_mode = {
.clock = 159916,
.hdisplay = 1200,
.hsync_start = 1200 + 80,
.hsync_end = 1200 + 80 + 24,
drm/panel: Fix boe,tv101wum-n53 htotal timing The datasheet suggests 60 for tHFP, so let's adjust the number accordingly. This also makes the framerate be 60Hz as intended: 159916.0 * 1000 / ((1200 + 80 + 24 + 60)*(1920 + 20 + 4 + 10)) => 60.00 Hz Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Fixes: e6d020eeefcd ("drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel") Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200125050256.107404-1-drinkcat@chromium.org
2020-01-25 13:02:56 +08:00
.htotal = 1200 + 80 + 24 + 60,
drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com
2020-01-16 10:15:10 +08:00
.vdisplay = 1920,
.vsync_start = 1920 + 20,
.vsync_end = 1920 + 20 + 4,
.vtotal = 1920 + 20 + 4 + 10,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct panel_desc boe_tv101wum_n53_desc = {
.modes = &boe_tv101wum_n53_default_mode,
.bpc = 8,
.size = {
.width_mm = 135,
.height_mm = 216,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = boe_init_cmd,
};
drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com
2020-01-16 10:15:11 +08:00
static const struct drm_display_mode auo_b101uan08_3_default_mode = {
.clock = 159667,
.hdisplay = 1200,
.hsync_start = 1200 + 60,
.hsync_end = 1200 + 60 + 4,
.htotal = 1200 + 60 + 4 + 80,
.vdisplay = 1920,
.vsync_start = 1920 + 34,
.vsync_end = 1920 + 34 + 2,
.vtotal = 1920 + 34 + 2 + 24,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct panel_desc auo_b101uan08_3_desc = {
.modes = &auo_b101uan08_3_default_mode,
.bpc = 8,
.size = {
.width_mm = 135,
.height_mm = 216,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = auo_b101uan08_3_init_cmd,
};
drm/panel: support for boe,tv105wum-nw0 dsi video mode panel Add entries for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel. Signed-off-by: David Lu <david.lu@bitland.com.cn> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200324075734.1802-1-david.lu@bitland.com.cn
2020-03-24 15:57:34 +08:00
static const struct drm_display_mode boe_tv105wum_nw0_default_mode = {
drm/panel: boe-tv101wum-n16: fine tune clock fix boe_tv105wum_nw0 display shift. Signed-off-by: David Lu <david.lu@bitland.com.cn> Fixes: 963518c12431 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
2020-04-28 14:45:21 +08:00
.clock = 159916,
drm/panel: support for boe,tv105wum-nw0 dsi video mode panel Add entries for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel. Signed-off-by: David Lu <david.lu@bitland.com.cn> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200324075734.1802-1-david.lu@bitland.com.cn
2020-03-24 15:57:34 +08:00
.hdisplay = 1200,
.hsync_start = 1200 + 80,
.hsync_end = 1200 + 80 + 24,
.htotal = 1200 + 80 + 24 + 60,
.vdisplay = 1920,
drm/panel: boe-tv101wum-n16: fine tune clock fix boe_tv105wum_nw0 display shift. Signed-off-by: David Lu <david.lu@bitland.com.cn> Fixes: 963518c12431 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag] Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn
2020-04-28 14:45:21 +08:00
.vsync_start = 1920 + 20,
.vsync_end = 1920 + 20 + 4,
.vtotal = 1920 + 20 + 4 + 10,
drm/panel: support for boe,tv105wum-nw0 dsi video mode panel Add entries for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel. Signed-off-by: David Lu <david.lu@bitland.com.cn> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200324075734.1802-1-david.lu@bitland.com.cn
2020-03-24 15:57:34 +08:00
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
};
static const struct panel_desc boe_tv105wum_nw0_desc = {
.modes = &boe_tv105wum_nw0_default_mode,
.bpc = 8,
.size = {
.width_mm = 141,
.height_mm = 226,
},
.lanes = 4,
.format = MIPI_DSI_FMT_RGB888,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
MIPI_DSI_MODE_LPM,
.init_cmds = boe_init_cmd,
};
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
static int boe_panel_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct boe_panel *boe = to_boe_panel(panel);
const struct drm_display_mode *m = boe->desc->modes;
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, m);
if (!mode) {
dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
drm: Nuke mode->vrefresh Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
2020-04-28 20:19:27 +03:00
m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
return -ENOMEM;
}
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = boe->desc->size.width_mm;
connector->display_info.height_mm = boe->desc->size.height_mm;
connector->display_info.bpc = boe->desc->bpc;
drm/panel: Read panel orientation for BOE TV101WUM-NL6 This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-14 00:56:07 +03:00
drm_connector_set_panel_orientation(connector, boe->orientation);
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
return 1;
}
static const struct drm_panel_funcs boe_panel_funcs = {
.unprepare = boe_panel_unprepare,
.prepare = boe_panel_prepare,
.enable = boe_panel_enable,
.get_modes = boe_panel_get_modes,
};
static int boe_panel_add(struct boe_panel *boe)
{
struct device *dev = &boe->dsi->dev;
int err;
boe->avdd = devm_regulator_get(dev, "avdd");
if (IS_ERR(boe->avdd))
return PTR_ERR(boe->avdd);
boe->avee = devm_regulator_get(dev, "avee");
if (IS_ERR(boe->avee))
return PTR_ERR(boe->avee);
drm/panel: boe-tv101wum-nl6: Support enabling a 3.3V rail The auo,b101uan08.3 panel (already supported by this driver) has a 3.3V rail that needs to be turned on. For previous users of this panel this voltage was directly output by pmic. On a new user (the not-yet-upstream sc7180-trogdor-mrbland board) we need to turn the 3.3V rail on. Add support in the driver for this. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-2-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:49 +08:00
boe->pp3300 = devm_regulator_get(dev, "pp3300");
if (IS_ERR(boe->pp3300))
return PTR_ERR(boe->pp3300);
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
boe->pp1800 = devm_regulator_get(dev, "pp1800");
if (IS_ERR(boe->pp1800))
return PTR_ERR(boe->pp1800);
boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(boe->enable_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(boe->enable_gpio));
return PTR_ERR(boe->enable_gpio);
}
gpiod_set_value(boe->enable_gpio, 0);
drm_panel_init(&boe->base, dev, &boe_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
drm/panel: Read panel orientation for BOE TV101WUM-NL6 This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-14 00:56:07 +03:00
err = of_drm_get_panel_orientation(dev->of_node, &boe->orientation);
if (err < 0) {
dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
return err;
}
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
err = drm_panel_of_backlight(&boe->base);
if (err)
return err;
boe->base.funcs = &boe_panel_funcs;
boe->base.dev = &boe->dsi->dev;
drm/panel: remove return value of function drm_panel_add The function "int drm_panel_add(struct drm_panel *panel)" always returns 0, this return value is meaningless. Also, there is no need to check return value which calls "drm_panel_add and", error branch code will never run. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
2020-08-01 20:02:13 +08:00
drm_panel_add(&boe->base);
return 0;
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
}
static int boe_panel_probe(struct mipi_dsi_device *dsi)
{
struct boe_panel *boe;
int ret;
const struct panel_desc *desc;
boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL);
if (!boe)
return -ENOMEM;
desc = of_device_get_match_data(&dsi->dev);
dsi->lanes = desc->lanes;
dsi->format = desc->format;
dsi->mode_flags = desc->mode_flags;
boe->desc = desc;
boe->dsi = dsi;
ret = boe_panel_add(boe);
if (ret < 0)
return ret;
mipi_dsi_set_drvdata(dsi, boe);
ret = mipi_dsi_attach(dsi);
if (ret)
drm_panel_remove(&boe->base);
return ret;
}
static void boe_panel_shutdown(struct mipi_dsi_device *dsi)
{
struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
drm_panel_disable(&boe->base);
drm_panel_unprepare(&boe->base);
}
static int boe_panel_remove(struct mipi_dsi_device *dsi)
{
struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
int ret;
boe_panel_shutdown(dsi);
ret = mipi_dsi_detach(dsi);
if (ret < 0)
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
if (boe->base.dev)
drm_panel_remove(&boe->base);
return 0;
}
static const struct of_device_id boe_of_match[] = {
{ .compatible = "boe,tv101wum-nl6",
.data = &boe_tv101wum_nl6_desc
},
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
{ .compatible = "auo,kd101n80-45na",
.data = &auo_kd101n80_45na_desc
},
drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com
2020-01-16 10:15:10 +08:00
{ .compatible = "boe,tv101wum-n53",
.data = &boe_tv101wum_n53_desc
},
drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com
2020-01-16 10:15:11 +08:00
{ .compatible = "auo,b101uan08.3",
.data = &auo_b101uan08_3_desc
},
drm/panel: support for boe,tv105wum-nw0 dsi video mode panel Add entries for BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel. Signed-off-by: David Lu <david.lu@bitland.com.cn> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200324075734.1802-1-david.lu@bitland.com.cn
2020-03-24 15:57:34 +08:00
{ .compatible = "boe,tv105wum-nw0",
.data = &boe_tv105wum_nw0_desc
},
drm/panel: support for BOE and INX video mode panel Support for these two panels fits in nicely with the existing panel-boe-tv101wum-nl6 driver as suggested by Sam [1]. This is an incell IC, TDDI use time division multiplexing. Init code effect touch sensing.The main things we needed to handle were: a) These panels need slightly longer delays in two places. Since these new delays aren't much longer, let's just unconditionally increase them for the driver. b) These panel use video BURST mode [1] https://lore.kernel.org/r/YSPAseE6WD8dDRuz@ravnborg.org/ Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> [dianders: fix whitespace issues reported by dim apply-branch] [dianders: inx,=>innolux,] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914032252.3770756-4-yangcong5@huaqin.corp-partner.google.com
2021-09-14 11:22:51 +08:00
{ .compatible = "boe,tv110c9m-ll3",
.data = &boe_tv110c9m_desc
},
{ .compatible = "innolux,hj110iz-01a",
.data = &inx_hj110iz_desc
},
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, boe_of_match);
static struct mipi_dsi_driver boe_panel_driver = {
.driver = {
.name = "panel-boe-tv101wum-nl6",
.of_match_table = boe_of_match,
},
.probe = boe_panel_probe,
.remove = boe_panel_remove,
.shutdown = boe_panel_shutdown,
};
module_mipi_dsi_driver(boe_panel_driver);
MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>");
MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink