iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/usb/chipidea/ci_hdrc_imx.h

38 lines
1.2 KiB
C
Raw Normal View History

USB: chipidea: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header files related to ChipIdea Highspeed Dual Role Controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2Flkml%2F2019%2F2%2F7%2F46&amp;data=02%7C01%7CPeter.Chen%40nxp.com%7Cbea69ff84b574ca6b48e08d7c8cf58cf%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637198665199494622&amp;sdata=bk1n4%2BvnrfRS6ZDrps%2BuXiImdzaxKZ00YskBg6pjtn4%3D&amp;reserved=0. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-03-15 16:25:07 +05:30
/* SPDX-License-Identifier: GPL-2.0+ */
USB: chipidea: add imx usbmisc support i.MX usb controllers share non-core registers, which may include SoC specific controls. We turn it into a usbmisc device and usbmisc driver set operations needed by ci13xxx_imx driver. For example, Sabrelite board has bad over-current design, we can usbmisc to disable over-current detection. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12 14:58:05 +03:00
/*
* Copyright 2012 Freescale Semiconductor, Inc.
*/
USB: chipidea: add guard macro to ci_hdrc_imx.h Add guard macro to driver/usb/chipidea/ci_hdrc_imx.h Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-31 21:58:11 +05:30
#ifndef __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
#define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
USB: chipidea: i.MX: simplify usbmisc The chipidea i.MX driver is split into two drivers. The ci_hdrc_imx driver handles the chipidea cores and the usbmisc_imx driver handles the noncore registers common to all chipidea cores (but SoC specific). Current flow is: - usbmisc sets an ops pointer in the ci_hdrc_imx driver during probe - ci_hdrc_imx checks if the pointer is valid during probe, if yes calls the functions in the ops pointer. - usbmisc_imx calls back into the ci_hdrc_imx driver to get additional data This is overly complicated and has problems if the drivers are compiled as modules. In this case the usbmisc_imx driver can be unloaded even if the ci_hdrc_imx driver still needs usbmisc functionality. This patch changes this by letting the ci_hdrc_imx driver calling functions from the usbmisc_imx driver. This way the symbol resolving during module load makes sure the ci_hdrc_imx driver depends on the usbmisc_imx driver. Also instead of letting the usbmisc_imx driver call back into the ci_hdrc_imx driver, pass the needed data in the first place. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 12:44:16 +03:00
struct imx_usbmisc_data {
chipidea: usbmisc_imx: Add USB support for VF610 SoCs This adds Vybrid VF610 SoC support. The IP is very similar to i.MX6, however, the non-core registers are spread in two different register areas. Hence we support multiple instances of the USB misc driver and add the driver instance to the imx_usbmisc_data structure. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22 08:14:15 +08:00
struct device *dev;
USB: chipidea: add imx usbmisc support i.MX usb controllers share non-core registers, which may include SoC specific controls. We turn it into a usbmisc device and usbmisc driver set operations needed by ci13xxx_imx driver. For example, Sabrelite board has bad over-current design, we can usbmisc to disable over-current detection. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12 14:58:05 +03:00
int index;
USB: chipidea: ci13xxx_imx: Remove sparse warning Remove the following sparse warning: drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield drivers/usb/chipidea/ci13xxx_imx.h:22:25: error: dubious one-bit signed bitfield Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-27 22:45:05 -02:00
unsigned int disable_oc:1; /* over current detect disabled */
usb: chipidea: imx: support configuring for active low oc signal The status quo on i.MX6 is that if "over-current-active-high" is specified in the device tree this is configured as expected. If the property is missing polarity isn't changed and so the polarity is kept as setup by the bootloader. Reset default is active high, so active low can only be used with help by the bootloader. On i.MX7 it is similar, but there disabling of over current detection has a similar inconsistency. This patch introduces a new property that allows to explicitly configure for active low over current detection and consistently sets this up. In the absence of an explicit configuration the bit is kept as is. On i.MX7 over current detection is used unless disabled in the device tree. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-12-04 09:31:29 +01:00
/* true if over-current polarity is active low */
unsigned int oc_pol_active_low:1;
/* true if dt specifies polarity */
unsigned int oc_pol_configured:1;
usb: chipidea: imx: set power polarity This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 06:51:34 +00:00
unsigned int pwr_pol:1; /* power polarity */
usb: chipidea: usbmisc: add post handling and errata fix for mx25 This adds a post handling routine which is called after ci13xxx_add_device was called. The first user is the mx25, which has to disable the external-vbus-divider after the udc has started. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [Alex: also fixed a signed one-bit bitfield a whitespace error and yet another set of line-too-long and void pointer casting errors] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-30 12:54:01 +02:00
unsigned int evdo:1; /* set external vbus divider option */
usb: chipidea: imx: configure imx for ULPI phy In order to use ULPI phy with usb host 2 and 3, we need to configure controller register to enable ULPI features. Each USB controller have different behaviour, so in order to avoid to have several "swicth(data->index)" and lock/unlock, we prefer to get the index switch and then test for features if they exist for this index. This patch also remove useless test of reg and val. Those two values cannot be NULL. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-26 13:14:19 +02:00
unsigned int ulpi:1; /* connected to an ULPI phy */
usb: chipidea: imx: add HSIC support To support imx HSIC, there are some special requirement: - The HSIC pad is 1.2v, it may need to supply from external - The data/strobe pin needs to be pulled down first, and after host mode is initialized, the strobe pin needs to be pulled up - During the USB suspend/resume, special setting is needed Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-10-16 09:17:02 +08:00
unsigned int hsic:1; /* HSIC controlller */
usb: chipidea: imx: enable vbus and id wakeup only for OTG events If ID or VBUS is from external block, don't enable its wakeup because it isn't used at all. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2019-09-09 14:41:41 +08:00
unsigned int ext_id:1; /* ID from exteranl event */
unsigned int ext_vbus:1; /* Vbus from exteranl event */
usb: chipidea: introduce imx7d USB charger detection imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver. The USB generic PHY driver is impossible to have a charger detection for every user, so we implement USB charger detection routine at glue layer. After the detection has finished, it will notify USB PHY charger framework, and the uevents will be triggered. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-01-23 14:35:58 +08:00
struct usb_phy *usb_phy;
USB: chipidea: add imx usbmisc support i.MX usb controllers share non-core registers, which may include SoC specific controls. We turn it into a usbmisc device and usbmisc driver set operations needed by ci13xxx_imx driver. For example, Sabrelite board has bad over-current design, we can usbmisc to disable over-current detection. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-12 14:58:05 +03:00
};
usb: chipidea: imx: add HSIC support To support imx HSIC, there are some special requirement: - The HSIC pad is 1.2v, it may need to supply from external - The data/strobe pin needs to be pulled down first, and after host mode is initialized, the strobe pin needs to be pulled up - During the USB suspend/resume, special setting is needed Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-10-16 09:17:02 +08:00
int imx_usbmisc_init(struct imx_usbmisc_data *data);
int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
usb: chipidea: introduce imx7d USB charger detection imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver. The USB generic PHY driver is impossible to have a charger detection for every user, so we implement USB charger detection routine at glue layer. After the detection has finished, it will notify USB PHY charger framework, and the uevents will be triggered. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-01-23 14:35:58 +08:00
int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect);
USB: chipidea: add guard macro to ci_hdrc_imx.h Add guard macro to driver/usb/chipidea/ci_hdrc_imx.h Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-31 21:58:11 +05:30
#endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
Reference in New Issue Copy Permalink