2010-03-09 06:04:12 +03:00
/*
* Hardware definitions for Voipac PXA270
*
* Copyright ( C ) 2010
* Marek Vasut < marek . vasut @ gmail . com >
*
* This program is free software ; you can redistribute it and / or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation .
*
*/
# include <linux/platform_device.h>
# include <linux/delay.h>
# include <linux/irq.h>
# include <linux/gpio_keys.h>
# include <linux/input.h>
# include <linux/gpio.h>
# include <linux/sysdev.h>
2010-03-10 07:24:27 +03:00
# include <linux/usb/gpio_vbus.h>
2010-03-09 06:04:12 +03:00
# include <linux/mtd/mtd.h>
# include <linux/mtd/partitions.h>
# include <linux/mtd/physmap.h>
2010-05-01 08:54:36 +04:00
# include <linux/mtd/onenand.h>
2010-03-10 07:38:54 +03:00
# include <linux/dm9000.h>
2010-03-26 06:45:54 +03:00
# include <linux/ucb1400.h>
2010-04-26 23:46:07 +04:00
# include <linux/ata_platform.h>
2010-05-21 05:12:43 +04:00
# include <linux/regulator/max1586.h>
2010-03-09 06:04:12 +03:00
# include <asm/mach-types.h>
# include <asm/mach/arch.h>
# include <mach/pxa27x.h>
2010-03-26 06:45:54 +03:00
# include <mach/audio.h>
2010-03-09 06:04:12 +03:00
# include <mach/vpac270.h>
# include <mach/mmc.h>
# include <mach/pxafb.h>
2010-03-10 07:24:27 +03:00
# include <mach/ohci.h>
# include <mach/pxa27x-udc.h>
# include <mach/udc.h>
2010-05-21 05:12:45 +04:00
# include <mach/pata_pxa.h>
2010-03-09 06:04:12 +03:00
2010-03-26 07:38:10 +03:00
# include <plat/i2c.h>
2010-03-09 06:04:12 +03:00
# include "generic.h"
# include "devices.h"
/******************************************************************************
* Pin configuration
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static unsigned long vpac270_pin_config [ ] __initdata = {
/* MMC */
GPIO32_MMC_CLK ,
GPIO92_MMC_DAT_0 ,
GPIO109_MMC_DAT_1 ,
GPIO110_MMC_DAT_2 ,
GPIO111_MMC_DAT_3 ,
GPIO112_MMC_CMD ,
GPIO53_GPIO , /* SD detect */
GPIO52_GPIO , /* SD r/o switch */
/* GPIO KEYS */
GPIO1_GPIO , /* USER BTN */
/* LEDs */
GPIO15_GPIO , /* orange led */
/* FFUART */
GPIO34_FFUART_RXD ,
GPIO39_FFUART_TXD ,
GPIO27_FFUART_RTS ,
GPIO100_FFUART_CTS ,
GPIO33_FFUART_DSR ,
GPIO40_FFUART_DTR ,
GPIO10_FFUART_DCD ,
GPIO38_FFUART_RI ,
/* LCD */
GPIO58_LCD_LDD_0 ,
GPIO59_LCD_LDD_1 ,
GPIO60_LCD_LDD_2 ,
GPIO61_LCD_LDD_3 ,
GPIO62_LCD_LDD_4 ,
GPIO63_LCD_LDD_5 ,
GPIO64_LCD_LDD_6 ,
GPIO65_LCD_LDD_7 ,
GPIO66_LCD_LDD_8 ,
GPIO67_LCD_LDD_9 ,
GPIO68_LCD_LDD_10 ,
GPIO69_LCD_LDD_11 ,
GPIO70_LCD_LDD_12 ,
GPIO71_LCD_LDD_13 ,
GPIO72_LCD_LDD_14 ,
GPIO73_LCD_LDD_15 ,
GPIO86_LCD_LDD_16 ,
GPIO87_LCD_LDD_17 ,
GPIO74_LCD_FCLK ,
GPIO75_LCD_LCLK ,
GPIO76_LCD_PCLK ,
GPIO77_LCD_BIAS ,
2010-03-10 06:16:28 +03:00
/* PCMCIA */
GPIO48_nPOE ,
GPIO49_nPWE ,
GPIO50_nPIOR ,
GPIO51_nPIOW ,
GPIO85_nPCE_1 ,
GPIO54_nPCE_2 ,
GPIO55_nPREG ,
GPIO57_nIOIS16 ,
GPIO56_nPWAIT ,
GPIO104_PSKTSEL ,
GPIO84_GPIO , /* PCMCIA CD */
GPIO35_GPIO , /* PCMCIA RDY */
GPIO107_GPIO , /* PCMCIA PPEN */
GPIO11_GPIO , /* PCMCIA RESET */
GPIO17_GPIO , /* CF CD */
GPIO12_GPIO , /* CF RDY */
GPIO16_GPIO , /* CF RESET */
2010-03-10 07:24:27 +03:00
/* UHC */
GPIO88_USBH1_PWR ,
GPIO89_USBH1_PEN ,
GPIO119_USBH2_PWR ,
GPIO120_USBH2_PEN ,
/* UDC */
GPIO41_GPIO ,
2010-03-10 07:38:54 +03:00
/* Ethernet */
GPIO114_GPIO , /* IRQ */
2010-03-26 06:45:54 +03:00
/* AC97 */
GPIO28_AC97_BITCLK ,
GPIO29_AC97_SDATA_IN_0 ,
GPIO30_AC97_SDATA_OUT ,
GPIO31_AC97_SYNC ,
GPIO95_AC97_nRESET ,
GPIO98_AC97_SYSCLK ,
GPIO113_GPIO , /* TS IRQ */
2010-03-26 07:38:10 +03:00
/* I2C */
GPIO117_I2C_SCL ,
GPIO118_I2C_SDA ,
2010-04-26 23:46:07 +04:00
/* IDE */
GPIO36_GPIO , /* IDE IRQ */
GPIO80_DREQ_1 ,
2010-03-09 06:04:12 +03:00
} ;
/******************************************************************************
* NOR Flash
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2010-05-01 08:54:36 +04:00
static struct mtd_partition vpac270_nor_partitions [ ] = {
2010-03-09 06:04:12 +03:00
{
. name = " Flash " ,
. offset = 0x00000000 ,
. size = MTDPART_SIZ_FULL ,
}
} ;
static struct physmap_flash_data vpac270_flash_data [ ] = {
{
. width = 2 , /* bankwidth in bytes */
2010-05-01 08:54:36 +04:00
. parts = vpac270_nor_partitions ,
. nr_parts = ARRAY_SIZE ( vpac270_nor_partitions )
2010-03-09 06:04:12 +03:00
}
} ;
static struct resource vpac270_flash_resource = {
. start = PXA_CS0_PHYS ,
. end = PXA_CS0_PHYS + SZ_64M - 1 ,
. flags = IORESOURCE_MEM ,
} ;
static struct platform_device vpac270_flash = {
. name = " physmap-flash " ,
. id = 0 ,
. resource = & vpac270_flash_resource ,
. num_resources = 1 ,
. dev = {
. platform_data = vpac270_flash_data ,
} ,
} ;
static void __init vpac270_nor_init ( void )
{
platform_device_register ( & vpac270_flash ) ;
}
# else
static inline void vpac270_nor_init ( void ) { }
# endif
2010-05-01 08:54:36 +04:00
/******************************************************************************
* OneNAND Flash
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
static struct mtd_partition vpac270_onenand_partitions [ ] = {
{
. name = " Flash " ,
. offset = 0x00000000 ,
. size = MTDPART_SIZ_FULL ,
}
} ;
static struct onenand_platform_data vpac270_onenand_info = {
. parts = vpac270_onenand_partitions ,
. nr_parts = ARRAY_SIZE ( vpac270_onenand_partitions ) ,
} ;
static struct resource vpac270_onenand_resources [ ] = {
[ 0 ] = {
. start = PXA_CS0_PHYS ,
. end = PXA_CS0_PHYS + SZ_1M ,
. flags = IORESOURCE_MEM ,
} ,
} ;
static struct platform_device vpac270_onenand = {
. name = " onenand-flash " ,
. id = - 1 ,
. resource = vpac270_onenand_resources ,
. num_resources = ARRAY_SIZE ( vpac270_onenand_resources ) ,
. dev = {
. platform_data = & vpac270_onenand_info ,
} ,
} ;
static void __init vpac270_onenand_init ( void )
{
platform_device_register ( & vpac270_onenand ) ;
}
# else
static void __init vpac270_onenand_init ( void ) { }
# endif
2010-03-09 06:04:12 +03:00
/******************************************************************************
* SD / MMC card controller
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
. ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34 ,
2010-08-09 05:55:09 +04:00
. gpio_power = - 1 ,
2010-03-09 06:04:12 +03:00
. gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N ,
. gpio_card_ro = GPIO52_VPAC270_SD_READONLY ,
2010-04-14 03:00:42 +04:00
. detect_delay_ms = 200 ,
2010-03-09 06:04:12 +03:00
} ;
static void __init vpac270_mmc_init ( void )
{
pxa_set_mci_info ( & vpac270_mci_platform_data ) ;
}
# else
static inline void vpac270_mmc_init ( void ) { }
# endif
/******************************************************************************
* GPIO keys
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button vpac270_pxa_buttons [ ] = {
{ KEY_POWER , GPIO1_VPAC270_USER_BTN , 0 , " USER BTN " } ,
} ;
static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
. buttons = vpac270_pxa_buttons ,
. nbuttons = ARRAY_SIZE ( vpac270_pxa_buttons ) ,
} ;
static struct platform_device vpac270_pxa_keys = {
. name = " gpio-keys " ,
. id = - 1 ,
. dev = {
. platform_data = & vpac270_pxa_keys_data ,
} ,
} ;
static void __init vpac270_keys_init ( void )
{
platform_device_register ( & vpac270_pxa_keys ) ;
}
# else
static inline void vpac270_keys_init ( void ) { }
# endif
/******************************************************************************
* LED
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
struct gpio_led vpac270_gpio_leds [ ] = {
{
. name = " vpac270:orange:user " ,
. default_trigger = " none " ,
. gpio = GPIO15_VPAC270_LED_ORANGE ,
. active_low = 1 ,
}
} ;
static struct gpio_led_platform_data vpac270_gpio_led_info = {
. leds = vpac270_gpio_leds ,
. num_leds = ARRAY_SIZE ( vpac270_gpio_leds ) ,
} ;
static struct platform_device vpac270_leds = {
. name = " leds-gpio " ,
. id = - 1 ,
. dev = {
. platform_data = & vpac270_gpio_led_info ,
}
} ;
static void __init vpac270_leds_init ( void )
{
platform_device_register ( & vpac270_leds ) ;
}
# else
static inline void vpac270_leds_init ( void ) { }
# endif
2010-03-10 07:24:27 +03:00
/******************************************************************************
* USB Host
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int vpac270_ohci_init ( struct device * dev )
{
UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE ;
return 0 ;
}
static struct pxaohci_platform_data vpac270_ohci_info = {
. port_mode = PMM_PERPORT_MODE ,
. flags = ENABLE_PORT1 | ENABLE_PORT2 |
POWER_CONTROL_LOW | POWER_SENSE_LOW ,
. init = vpac270_ohci_init ,
} ;
static void __init vpac270_uhc_init ( void )
{
pxa_set_ohci_info ( & vpac270_ohci_info ) ;
}
# else
static inline void vpac270_uhc_init ( void ) { }
# endif
/******************************************************************************
* USB Gadget
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
. gpio_vbus = GPIO41_VPAC270_UDC_DETECT ,
. gpio_pullup = - 1 ,
} ;
static struct platform_device vpac270_gpio_vbus = {
. name = " gpio-vbus " ,
. id = - 1 ,
. dev = {
. platform_data = & vpac270_gpio_vbus_info ,
} ,
} ;
static void vpac270_udc_command ( int cmd )
{
if ( cmd = = PXA2XX_UDC_CMD_CONNECT )
2010-05-02 08:10:25 +04:00
UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE ;
2010-03-10 07:24:27 +03:00
else if ( cmd = = PXA2XX_UDC_CMD_DISCONNECT )
2010-05-02 08:10:25 +04:00
UP2OCR = UP2OCR_HXOE ;
2010-03-10 07:24:27 +03:00
}
static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
. udc_command = vpac270_udc_command ,
. gpio_pullup = - 1 ,
} ;
static void __init vpac270_udc_init ( void )
{
pxa_set_udc_info ( & vpac270_udc_info ) ;
platform_device_register ( & vpac270_gpio_vbus ) ;
}
# else
static inline void vpac270_udc_init ( void ) { }
# endif
2010-03-10 07:38:54 +03:00
/******************************************************************************
* Ethernet
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource vpac270_dm9000_resources [ ] = {
[ 0 ] = {
. start = PXA_CS2_PHYS + 0x300 ,
. end = PXA_CS2_PHYS + 0x303 ,
. flags = IORESOURCE_MEM ,
} ,
[ 1 ] = {
. start = PXA_CS2_PHYS + 0x304 ,
. end = PXA_CS2_PHYS + 0x343 ,
. flags = IORESOURCE_MEM ,
} ,
[ 2 ] = {
. start = IRQ_GPIO ( GPIO114_VPAC270_ETH_IRQ ) ,
. end = IRQ_GPIO ( GPIO114_VPAC270_ETH_IRQ ) ,
. flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE ,
} ,
} ;
static struct dm9000_plat_data vpac270_dm9000_platdata = {
. flags = DM9000_PLATF_32BITONLY ,
} ;
static struct platform_device vpac270_dm9000_device = {
. name = " dm9000 " ,
. id = - 1 ,
. num_resources = ARRAY_SIZE ( vpac270_dm9000_resources ) ,
. resource = vpac270_dm9000_resources ,
. dev = {
. platform_data = & vpac270_dm9000_platdata ,
}
} ;
static void __init vpac270_eth_init ( void )
{
platform_device_register ( & vpac270_dm9000_device ) ;
}
# else
static inline void vpac270_eth_init ( void ) { }
# endif
2010-03-26 06:45:54 +03:00
/******************************************************************************
* Audio and Touchscreen
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
defined ( CONFIG_TOUCHSCREEN_UCB1400_MODULE )
static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
. reset_gpio = 95 ,
} ;
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
2010-04-27 01:23:48 +04:00
. irq = IRQ_GPIO ( GPIO113_VPAC270_TS_IRQ ) ,
2010-03-26 06:45:54 +03:00
} ;
static struct platform_device vpac270_ucb1400_device = {
. name = " ucb1400_core " ,
. id = - 1 ,
. dev = {
. platform_data = & vpac270_ucb1400_pdata ,
} ,
} ;
static void __init vpac270_ts_init ( void )
{
pxa_set_ac97_info ( & vpac270_ac97_pdata ) ;
platform_device_register ( & vpac270_ucb1400_device ) ;
}
# else
static inline void vpac270_ts_init ( void ) { }
# endif
2010-03-26 07:38:10 +03:00
/******************************************************************************
* RTC
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
static struct i2c_board_info __initdata vpac270_i2c_devs [ ] = {
{
I2C_BOARD_INFO ( " ds1339 " , 0x68 ) ,
} ,
} ;
static void __init vpac270_rtc_init ( void )
{
i2c_register_board_info ( 0 , ARRAY_AND_SIZE ( vpac270_i2c_devs ) ) ;
}
# else
static inline void vpac270_rtc_init ( void ) { }
# endif
2010-03-09 06:04:12 +03:00
/******************************************************************************
* Framebuffer
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info vpac270_lcd_modes [ ] = {
{
. pixclock = 57692 ,
. xres = 640 ,
. yres = 480 ,
. bpp = 32 ,
. depth = 18 ,
. left_margin = 144 ,
. right_margin = 32 ,
. upper_margin = 13 ,
. lower_margin = 30 ,
. hsync_len = 32 ,
. vsync_len = 2 ,
. sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT ,
2010-05-21 05:12:46 +04:00
} , { /* CRT 640x480 */
. pixclock = 35000 ,
. xres = 640 ,
. yres = 480 ,
. bpp = 16 ,
. depth = 16 ,
. left_margin = 96 ,
. right_margin = 48 ,
. upper_margin = 33 ,
. lower_margin = 10 ,
. hsync_len = 48 ,
. vsync_len = 1 ,
. sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT ,
} , { /* CRT 800x600 H=30kHz V=48HZ */
. pixclock = 25000 ,
. xres = 800 ,
. yres = 600 ,
. bpp = 16 ,
. depth = 16 ,
. left_margin = 50 ,
. right_margin = 1 ,
. upper_margin = 21 ,
. lower_margin = 12 ,
. hsync_len = 8 ,
. vsync_len = 1 ,
. sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT ,
} , { /* CRT 1024x768 H=40kHz V=50Hz */
. pixclock = 15000 ,
. xres = 1024 ,
. yres = 768 ,
. bpp = 16 ,
. depth = 16 ,
. left_margin = 220 ,
. right_margin = 8 ,
. upper_margin = 33 ,
. lower_margin = 2 ,
. hsync_len = 48 ,
. vsync_len = 1 ,
. sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT ,
}
2010-03-09 06:04:12 +03:00
} ;
static struct pxafb_mach_info vpac270_lcd_screen = {
. modes = vpac270_lcd_modes ,
. num_modes = ARRAY_SIZE ( vpac270_lcd_modes ) ,
. lcd_conn = LCD_COLOR_TFT_18BPP ,
} ;
static void vpac270_lcd_power ( int on , struct fb_var_screeninfo * info )
{
gpio_set_value ( GPIO81_VPAC270_BKL_ON , on ) ;
}
static void __init vpac270_lcd_init ( void )
{
int ret ;
ret = gpio_request ( GPIO81_VPAC270_BKL_ON , " BKL-ON " ) ;
if ( ret ) {
pr_err ( " Requesting BKL-ON GPIO failed! \n " ) ;
goto err ;
}
ret = gpio_direction_output ( GPIO81_VPAC270_BKL_ON , 1 ) ;
if ( ret ) {
pr_err ( " Setting BKL-ON GPIO direction failed! \n " ) ;
goto err2 ;
}
vpac270_lcd_screen . pxafb_lcd_power = vpac270_lcd_power ;
set_pxa_fb_info ( & vpac270_lcd_screen ) ;
return ;
err2 :
gpio_free ( GPIO81_VPAC270_BKL_ON ) ;
err :
return ;
}
# else
static inline void vpac270_lcd_init ( void ) { }
# endif
2010-04-26 23:46:07 +04:00
/******************************************************************************
* PATA IDE
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2010-05-21 05:12:45 +04:00
# if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
static struct pata_pxa_pdata vpac270_pata_pdata = {
. reg_shift = 1 ,
. dma_dreq = 1 ,
2010-04-26 23:46:07 +04:00
. irq_flags = IRQF_TRIGGER_RISING ,
} ;
static struct resource vpac270_ide_resources [ ] = {
[ 0 ] = { /* I/O Base address */
. start = PXA_CS3_PHYS + 0x120 ,
. end = PXA_CS3_PHYS + 0x13f ,
. flags = IORESOURCE_MEM
} ,
[ 1 ] = { /* CTL Base address */
. start = PXA_CS3_PHYS + 0x15c ,
. end = PXA_CS3_PHYS + 0x15f ,
. flags = IORESOURCE_MEM
} ,
2010-05-21 05:12:45 +04:00
[ 2 ] = { /* DMA Base address */
. start = PXA_CS3_PHYS + 0x20 ,
. end = PXA_CS3_PHYS + 0x2f ,
. flags = IORESOURCE_DMA
} ,
[ 3 ] = { /* IDE IRQ pin */
2010-04-26 23:46:07 +04:00
. start = gpio_to_irq ( GPIO36_VPAC270_IDE_IRQ ) ,
. end = gpio_to_irq ( GPIO36_VPAC270_IDE_IRQ ) ,
. flags = IORESOURCE_IRQ
}
} ;
static struct platform_device vpac270_ide_device = {
2010-05-21 05:12:45 +04:00
. name = " pata_pxa " ,
2010-04-26 23:46:07 +04:00
. num_resources = ARRAY_SIZE ( vpac270_ide_resources ) ,
. resource = vpac270_ide_resources ,
. dev = {
. platform_data = & vpac270_pata_pdata ,
2010-05-21 05:12:45 +04:00
. coherent_dma_mask = 0xffffffff ,
2010-04-26 23:46:07 +04:00
}
} ;
static void __init vpac270_ide_init ( void )
{
platform_device_register ( & vpac270_ide_device ) ;
}
# else
static inline void vpac270_ide_init ( void ) { }
# endif
2010-05-21 05:12:43 +04:00
/******************************************************************************
* Core power regulator
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# if defined(CONFIG_REGULATOR_MAX1586) || \
defined ( CONFIG_REGULATOR_MAX1586_MODULE )
static struct regulator_consumer_supply vpac270_max1587a_consumers [ ] = {
{
. supply = " vcc_core " ,
}
} ;
static struct regulator_init_data vpac270_max1587a_v3_info = {
. constraints = {
. name = " vcc_core range " ,
. min_uV = 900000 ,
. max_uV = 1705000 ,
. always_on = 1 ,
. valid_ops_mask = REGULATOR_CHANGE_VOLTAGE ,
} ,
. consumer_supplies = vpac270_max1587a_consumers ,
. num_consumer_supplies = ARRAY_SIZE ( vpac270_max1587a_consumers ) ,
} ;
static struct max1586_subdev_data vpac270_max1587a_subdevs [ ] = {
{
. name = " vcc_core " ,
. id = MAX1586_V3 ,
. platform_data = & vpac270_max1587a_v3_info ,
}
} ;
static struct max1586_platform_data vpac270_max1587a_info = {
. subdevs = vpac270_max1587a_subdevs ,
. num_subdevs = ARRAY_SIZE ( vpac270_max1587a_subdevs ) ,
. v3_gain = MAX1586_GAIN_R24_3k32 , /* 730..1550 mV */
} ;
static struct i2c_board_info __initdata vpac270_pi2c_board_info [ ] = {
{
I2C_BOARD_INFO ( " max1586 " , 0x14 ) ,
. platform_data = & vpac270_max1587a_info ,
} ,
} ;
static void __init vpac270_pmic_init ( void )
{
i2c_register_board_info ( 1 , ARRAY_AND_SIZE ( vpac270_pi2c_board_info ) ) ;
}
# else
static inline void vpac270_pmic_init ( void ) { }
# endif
2010-03-09 06:04:12 +03:00
/******************************************************************************
* Machine init
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static void __init vpac270_init ( void )
{
pxa2xx_mfp_config ( ARRAY_AND_SIZE ( vpac270_pin_config ) ) ;
pxa_set_ffuart_info ( NULL ) ;
pxa_set_btuart_info ( NULL ) ;
pxa_set_stuart_info ( NULL ) ;
2010-05-21 05:12:43 +04:00
pxa_set_i2c_info ( NULL ) ;
pxa27x_set_i2c_power_info ( NULL ) ;
2010-03-09 06:04:12 +03:00
2010-05-21 05:12:43 +04:00
vpac270_pmic_init ( ) ;
2010-03-09 06:04:12 +03:00
vpac270_lcd_init ( ) ;
vpac270_mmc_init ( ) ;
vpac270_nor_init ( ) ;
2010-05-01 08:54:36 +04:00
vpac270_onenand_init ( ) ;
2010-03-09 06:04:12 +03:00
vpac270_leds_init ( ) ;
vpac270_keys_init ( ) ;
2010-03-10 07:24:27 +03:00
vpac270_uhc_init ( ) ;
vpac270_udc_init ( ) ;
2010-03-10 07:38:54 +03:00
vpac270_eth_init ( ) ;
2010-03-26 06:45:54 +03:00
vpac270_ts_init ( ) ;
2010-03-26 07:38:10 +03:00
vpac270_rtc_init ( ) ;
2010-04-26 23:46:07 +04:00
vpac270_ide_init ( ) ;
2010-03-09 06:04:12 +03:00
}
MACHINE_START ( VPAC270 , " Voipac PXA270 " )
. boot_params = 0xa0000100 ,
. map_io = pxa_map_io ,
. init_irq = pxa27x_init_irq ,
. timer = & pxa_timer ,
. init_machine = vpac270_init
MACHINE_END
