2005-04-17 02:20:36 +04:00
# ifndef __SOUND_EMU10K1_H
# define __SOUND_EMU10K1_H
/*
* Copyright ( c ) by Jaroslav Kysela < perex @ suse . cz > ,
* Creative Labs , Inc .
* Definitions for EMU10K1 ( SB Live ! ) chips
*
*
* This program is free software ; you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation ; either version 2 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program ; if not , write to the Free Software
* Foundation , Inc . , 59 Temple Place , Suite 330 , Boston , MA 02111 - 1307 USA
*
*/
# ifdef __KERNEL__
# include <sound/pcm.h>
# include <sound/rawmidi.h>
# include <sound/hwdep.h>
# include <sound/ac97_codec.h>
# include <sound/util_mem.h>
# include <sound/pcm-indirect.h>
# include <sound/timer.h>
# include <linux/interrupt.h>
# include <asm/io.h>
/* ------------------- DEFINES -------------------- */
# define EMUPAGESIZE 4096
# define MAXREQVOICES 8
# define MAXPAGES 8192
# define RESERVED 0
# define NUM_MIDI 16
# define NUM_G 64 /* use all channels */
# define NUM_FXSENDS 4
# define NUM_EFX_PLAYBACK 16
/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
# define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */
# define AUDIGY_DMA_MASK 0xffffffffUL /* 32bit */
# define TMEMSIZE 256*1024
# define TMEMSIZEREG 4
# define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
// Audigy specify registers are prefixed with 'A_'
/************************************************************************************************/
/* PCI function 0 registers, address = <val> + PCIBASE0 */
/************************************************************************************************/
# define PTR 0x00 /* Indexed register set pointer register */
/* NOTE: The CHANNELNUM and ADDRESS words can */
/* be modified independently of each other. */
# define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */
/* channel number of the register to be */
/* accessed. For non per-channel registers the */
/* value should be set to zero. */
# define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */
# define A_PTR_ADDRESS_MASK 0x0fff0000
# define DATA 0x04 /* Indexed register set data register */
# define IPR 0x08 /* Global interrupt pending register */
/* Clear pending interrupts by writing a 1 to */
/* the relevant bits and zero to the other bits */
2005-03-26 21:35:29 +03:00
# define IPR_P16V 0x80000000 / * Bit set when the CA0151 P16V chip wishes
to interrupt */
2005-04-17 02:20:36 +04:00
# define IPR_GPIOMSG 0x20000000 / * GPIO message interrupt (RE'd, still not sure
which INTE bits enable it ) */
/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
# define IPR_A_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */
# define IPR_A_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */
# define IPR_SPDIFBUFFULL 0x04000000 /* SPDIF capture related, 10k2 only? (RE) */
# define IPR_SPDIFBUFHALFFULL 0x02000000 /* SPDIF capture related? (RE) */
# define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */
# define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */
# define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */
# define IPR_PCIERROR 0x00200000 /* PCI bus error */
# define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */
# define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */
# define IPR_MUTE 0x00040000 /* Mute button pressed */
# define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */
# define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */
# define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */
# define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */
# define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */
# define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */
# define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */
# define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */
# define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */
# define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */
# define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */
# define IPR_CHANNELLOOP 0x00000040 /* Channel (half) loop interrupt(s) pending */
# define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */
/* highest set channel in CLIPL, CLIPH, HLIPL, */
/* or HLIPH. When IP is written with CL set, */
/* the bit in H/CLIPL or H/CLIPH corresponding */
/* to the CIN value written will be cleared. */
# define INTE 0x0c /* Interrupt enable register */
# define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */
# define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */
# define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */
# define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */
# define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */
# define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */
# define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */
# define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */
# define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */
# define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */
# define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */
# define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */
# define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */
# define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */
# define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */
# define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */
# define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */
# define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */
# define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */
/* NOTE: There is no reason to use this under */
/* Linux, and it will cause odd hardware */
/* behavior and possibly random segfaults and */
/* lockups if enabled. */
/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
# define INTE_A_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */
# define INTE_A_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */
# define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */
/* NOTE: This bit must always be enabled */
# define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */
# define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */
# define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */
# define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */
# define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */
# define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */
# define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */
# define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */
# define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */
# define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */
# define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */
# define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */
# define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */
# define WC 0x10 /* Wall Clock register */
# define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */
# define WC_SAMPLECOUNTER 0x14060010
# define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */
/* NOTE: Each channel takes 1/64th of a sample */
/* period to be serviced. */
# define HCFG 0x14 /* Hardware config register */
/* NOTE: There is no reason to use the legacy */
/* SoundBlaster emulation stuff described below */
/* under Linux, and all kinds of weird hardware */
/* behavior can result if you try. Don't. */
# define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */
# define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */
# define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */
# define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */
# define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */
# define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */
# define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */
# define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */
# define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */
# define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */
# define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */
# define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */
/* NOTE: The rest of the bits in this register */
/* _are_ relevant under Linux. */
# define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */
# define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */
# define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */
# define HCFG_GPINPUT0 0x00004000 /* External pin112 */
# define HCFG_GPINPUT1 0x00002000 /* External pin110 */
# define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */
# define HCFG_GPOUT0 0x00001000 /* External pin? (spdif enable on 5.1) */
# define HCFG_GPOUT1 0x00000800 /* External pin? (IR) */
# define HCFG_GPOUT2 0x00000400 /* External pin? (IR) */
# define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */
# define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */
/* 1 = Force all 3 async digital inputs to use */
/* the same async sample rate tracker (ZVIDEO) */
# define HCFG_AC3ENABLE_MASK 0x000000e0 /* AC3 async input control - Not implemented */
# define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */
# define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */
# define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */
# define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */
/* will automatically mute their output when */
/* they are not rate-locked to the external */
/* async audio source */
# define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */
/* NOTE: This should generally never be used. */
# define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */
/* NOTE: This should generally never be used. */
# define HCFG_LOCKTANKCACHE 0x01020014
# define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */
/* NOTE: This is a 'cheap' way to implement a */
/* master mute function on the mute button, and */
/* in general should not be used unless a more */
/* sophisticated master mute function has not */
/* been written. */
# define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
/* Should be set to 1 when the EMU10K1 is */
/* completely initialized. */
//For Audigy, MPU port move to 0x70-0x74 ptr register
# define MUDATA 0x18 /* MPU401 data register (8 bits) */
# define MUCMD 0x19 /* MPU401 command register (8 bits) */
# define MUCMD_RESET 0xff /* RESET command */
# define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */
/* NOTE: All other commands are ignored */
# define MUSTAT MUCMD /* MPU401 status register (8 bits) */
# define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */
# define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
# define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */
# define A_GPINPUT_MASK 0xff00
# define A_GPOUTPUT_MASK 0x00ff
// Audigy output/GPIO stuff taken from the kX drivers
# define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
# define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
# define A_IOCFG_ENABLE_DIGITAL 0x0004
# define A_IOCFG_UNKNOWN_20 0x0020
# define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
# define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
# define A_IOCFG_GPOUT2 0x0001 /* IR */
# define A_IOCFG_MULTIPURPOSE_JACK 0x2000 /* center+lfe+rear_center (a2/a2ex) */
/* + digital for generic 10k2 */
# define A_IOCFG_DIGITAL_JACK 0x1000 /* digital for a2 platinum */
# define A_IOCFG_FRONT_JACK 0x4000
# define A_IOCFG_REAR_JACK 0x8000
# define A_IOCFG_PHONES_JACK 0x0100 /* LiveDrive */
/* outputs:
* for audigy2 platinum : 0xa00
* for a2 platinum ex : 0x1c00
* for a1 platinum : 0x0
*/
# define TIMER 0x1a /* Timer terminal count register */
/* NOTE: After the rate is changed, a maximum */
/* of 1024 sample periods should be allowed */
/* before the new rate is guaranteed accurate. */
# define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */
/* 0 == 1024 periods, [1..4] are not useful */
# define TIMER_RATE 0x0a00001a
# define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
# define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
# define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */
# define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */
/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
# define PTR2 0x20 /* Indexed register set pointer register */
# define DATA2 0x24 /* Indexed register set data register */
# define IPR2 0x28 /* P16V interrupt pending register */
# define IPR2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
# define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
# define IPR2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
# define IPR2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Capture Channel 0 half loop */
/* 0x00000100 Playback. Only in once per period.
* 0x00110000 Capture . Int on half buffer .
*/
# define INTE2 0x2c /* P16V Interrupt enable register. */
# define INTE2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
# define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
# define INTE2_PLAYBACK_CH_1_LOOP 0x00002000 /* Playback Channel 1 loop */
# define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop */
# define INTE2_PLAYBACK_CH_2_LOOP 0x00004000 /* Playback Channel 2 loop */
# define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop */
# define INTE2_PLAYBACK_CH_3_LOOP 0x00008000 /* Playback Channel 3 loop */
# define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop */
# define INTE2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
# define INTE2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Caputre Channel 0 half loop */
# define HCFG2 0x34 /* Defaults: 0, win2000 sets it to 00004201 */
/* 0x00000000 2-channel output. */
/* 0x00000200 8-channel output. */
/* 0x00000004 pauses stream/irq fail. */
/* Rest of bits no nothing to sound output */
/* bit 0: Enable P16V audio.
* bit 1 : Lock P16V record memory cache .
* bit 2 : Lock P16V playback memory cache .
* bit 3 : Dummy record insert zero samples .
* bit 8 : Record 8 - channel in phase .
* bit 9 : Playback 8 - channel in phase .
* bit 11 - 12 : Playback mixer attenuation : 0 = 0 dB , 1 = - 6 dB , 2 = - 12 dB , 3 = Mute .
* bit 13 : Playback mixer enable .
* bit 14 : Route SRC48 mixer output to fx engine .
* bit 15 : Enable IEEE 1394 chip .
*/
# define IPR3 0x38 /* Cdif interrupt pending register */
# define INTE3 0x3c /* Cdif interrupt enable register. */
/************************************************************************************************/
/* PCI function 1 registers, address = <val> + PCIBASE1 */
/************************************************************************************************/
# define JOYSTICK1 0x00 /* Analog joystick port register */
# define JOYSTICK2 0x01 /* Analog joystick port register */
# define JOYSTICK3 0x02 /* Analog joystick port register */
# define JOYSTICK4 0x03 /* Analog joystick port register */
# define JOYSTICK5 0x04 /* Analog joystick port register */
# define JOYSTICK6 0x05 /* Analog joystick port register */
# define JOYSTICK7 0x06 /* Analog joystick port register */
# define JOYSTICK8 0x07 /* Analog joystick port register */
/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */
/* When reading, use these bitfields: */
# define JOYSTICK_BUTTONS 0x0f /* Joystick button data */
# define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */
/********************************************************************************************************/
/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */
/********************************************************************************************************/
# define CPF 0x00 /* Current pitch and fraction register */
# define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */
# define CPF_CURRENTPITCH 0x10100000
# define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */
# define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */
# define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */
# define PTRX 0x01 /* Pitch target and send A/B amounts register */
# define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */
# define PTRX_PITCHTARGET 0x10100001
# define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */
# define PTRX_FXSENDAMOUNT_A 0x08080001
# define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */
# define PTRX_FXSENDAMOUNT_B 0x08000001
# define CVCF 0x02 /* Current volume and filter cutoff register */
# define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */
# define CVCF_CURRENTVOL 0x10100002
# define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */
# define CVCF_CURRENTFILTER 0x10000002
# define VTFT 0x03 /* Volume target and filter cutoff target register */
# define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */
# define VTFT_VOLUMETARGET 0x10100003
# define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */
# define VTFT_FILTERTARGET 0x10000003
# define Z1 0x05 /* Filter delay memory 1 register */
# define Z2 0x04 /* Filter delay memory 2 register */
# define PSST 0x06 /* Send C amount and loop start address register */
# define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */
# define PSST_FXSENDAMOUNT_C 0x08180006
# define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */
# define PSST_LOOPSTARTADDR 0x18000006
# define DSL 0x07 /* Send D amount and loop start address register */
# define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */
# define DSL_FXSENDAMOUNT_D 0x08180007
# define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */
# define DSL_LOOPENDADDR 0x18000007
# define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */
# define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */
# define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */
/* 1 == full band, 7 == lowpass */
/* ROM 0 is used when pitch shifting downward or less */
/* then 3 semitones upward. Increasingly higher ROM */
/* numbers are used, typically in steps of 3 semitones, */
/* as upward pitch shifting is performed. */
# define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */
# define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */
# define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */
# define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */
# define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */
# define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */
# define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */
# define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */
# define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */
# define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */
# define CCCA_CURRADDR 0x18000008
# define CCR 0x09 /* Cache control register */
# define CCR_CACHEINVALIDSIZE 0x07190009
# define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */
# define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */
# define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */
# define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */
# define CCR_READADDRESS 0x06100009
# define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */
# define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */
/* NOTE: This is valid only if CACHELOOPFLAG is set */
# define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */
# define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */
# define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
/* NOTE: This register is normally not used */
# define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */
# define FXRT 0x0b /* Effects send routing register */
/* NOTE: It is illegal to assign the same routing to */
/* two effects sends. */
# define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */
# define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */
# define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
# define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
# define MAPA 0x0c /* Cache map A */
# define MAPB 0x0d /* Cache map B */
# define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
# define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
# define ENVVOL 0x10 /* Volume envelope register */
# define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
/* 0x8000-n == 666*n usec delay */
# define ATKHLDV 0x11 /* Volume envelope hold and attack register */
# define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */
# define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */
# define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */
/* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */
# define DCYSUSV 0x12 /* Volume envelope sustain and decay register */
# define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
# define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
# define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */
/* this channel and from writing to pitch, filter and */
/* volume targets. */
# define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */
/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
# define LFOVAL1 0x13 /* Modulation LFO value */
# define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */
/* 0x8000-n == 666*n usec delay */
# define ENVVAL 0x14 /* Modulation envelope register */
# define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */
/* 0x8000-n == 666*n usec delay */
# define ATKHLDM 0x15 /* Modulation envelope hold and attack register */
# define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */
# define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */
# define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */
/* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */
# define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */
# define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
# define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
# define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */
/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
# define LFOVAL2 0x17 /* Vibrato LFO register */
# define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */
/* 0x8000-n == 666*n usec delay */
# define IP 0x18 /* Initial pitch register */
# define IP_MASK 0x0000ffff /* Exponential initial pitch shift */
/* 4 bits of octave, 12 bits of fractional octave */
# define IP_UNITY 0x0000e000 /* Unity pitch shift */
# define IFATN 0x19 /* Initial filter cutoff and attenuation register */
# define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */
/* 6 most significant bits are semitones */
/* 2 least significant bits are fractions */
# define IFATN_FILTERCUTOFF 0x08080019
# define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */
# define IFATN_ATTENUATION 0x08000019
# define PEFE 0x1a /* Pitch envelope and filter envelope amount register */
# define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */
/* Signed 2's complement, +/- one octave peak extremes */
# define PEFE_PITCHAMOUNT 0x0808001a
# define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */
/* Signed 2's complement, +/- six octaves peak extremes */
# define PEFE_FILTERAMOUNT 0x0800001a
# define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */
# define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */
/* Signed 2's complement, +/- one octave extremes */
# define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */
/* Signed 2's complement, +/- three octave extremes */
# define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */
# define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */
/* Signed 2's complement, with +/- 12dB extremes */
# define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */
/* ??Hz steps, maximum of ?? Hz. */
# define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */
# define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */
/* Signed 2's complement, +/- one octave extremes */
# define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */
/* 0.039Hz steps, maximum of 9.85 Hz. */
# define TEMPENV 0x1e /* Tempory envelope register */
# define TEMPENV_MASK 0x0000ffff /* 16-bit value */
/* NOTE: All channels contain internal variables; do */
/* not write to these locations. */
/* 1f something */
# define CD0 0x20 /* Cache data 0 register */
# define CD1 0x21 /* Cache data 1 register */
# define CD2 0x22 /* Cache data 2 register */
# define CD3 0x23 /* Cache data 3 register */
# define CD4 0x24 /* Cache data 4 register */
# define CD5 0x25 /* Cache data 5 register */
# define CD6 0x26 /* Cache data 6 register */
# define CD7 0x27 /* Cache data 7 register */
# define CD8 0x28 /* Cache data 8 register */
# define CD9 0x29 /* Cache data 9 register */
# define CDA 0x2a /* Cache data A register */
# define CDB 0x2b /* Cache data B register */
# define CDC 0x2c /* Cache data C register */
# define CDD 0x2d /* Cache data D register */
# define CDE 0x2e /* Cache data E register */
# define CDF 0x2f /* Cache data F register */
/* 0x30-3f seem to be the same as 0x20-2f */
# define PTB 0x40 /* Page table base register */
# define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */
# define TCB 0x41 /* Tank cache base register */
# define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */
# define ADCCR 0x42 /* ADC sample rate/stereo control register */
# define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */
# define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */
/* NOTE: To guarantee phase coherency, both channels */
/* must be disabled prior to enabling both channels. */
# define A_ADCCR_RCHANENABLE 0x00000020
# define A_ADCCR_LCHANENABLE 0x00000010
# define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */
# define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */
# define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */
# define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */
# define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */
# define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */
# define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */
# define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */
# define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */
# define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */
# define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */
# define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */
# define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */
# define FXWC 0x43 /* FX output write channels register */
/* When set, each bit enables the writing of the */
/* corresponding FX output channel (internal registers */
/* 0x20-0x3f) to host memory. This mode of recording */
/* is 16bit, 48KHz only. All 32 channels can be enabled */
/* simultaneously. */
# define FXWC_DEFAULTROUTE_C (1<<0) /* left emu out? */
# define FXWC_DEFAULTROUTE_B (1<<1) /* right emu out? */
# define FXWC_DEFAULTROUTE_A (1<<12)
# define FXWC_DEFAULTROUTE_D (1<<13)
# define FXWC_ADCLEFT (1<<18)
# define FXWC_CDROMSPDIFLEFT (1<<18)
# define FXWC_ADCRIGHT (1<<19)
# define FXWC_CDROMSPDIFRIGHT (1<<19)
# define FXWC_MIC (1<<20)
# define FXWC_ZOOMLEFT (1<<20)
# define FXWC_ZOOMRIGHT (1<<21)
# define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */
# define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */
# define TCBS 0x44 /* Tank cache buffer size register */
# define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
# define TCBS_BUFFSIZE_16K 0x00000000
# define TCBS_BUFFSIZE_32K 0x00000001
# define TCBS_BUFFSIZE_64K 0x00000002
# define TCBS_BUFFSIZE_128K 0x00000003
# define TCBS_BUFFSIZE_256K 0x00000004
# define TCBS_BUFFSIZE_512K 0x00000005
# define TCBS_BUFFSIZE_1024K 0x00000006
# define TCBS_BUFFSIZE_2048K 0x00000007
# define MICBA 0x45 /* AC97 microphone buffer address register */
# define MICBA_MASK 0xfffff000 /* 20 bit base address */
# define ADCBA 0x46 /* ADC buffer address register */
# define ADCBA_MASK 0xfffff000 /* 20 bit base address */
# define FXBA 0x47 /* FX Buffer Address */
# define FXBA_MASK 0xfffff000 /* 20 bit base address */
/* 0x48 something - word access, defaults to 3f */
# define MICBS 0x49 /* Microphone buffer size register */
# define ADCBS 0x4a /* ADC buffer size register */
# define FXBS 0x4b /* FX buffer size register */
/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
# define ADCBS_BUFSIZE_NONE 0x00000000
# define ADCBS_BUFSIZE_384 0x00000001
# define ADCBS_BUFSIZE_448 0x00000002
# define ADCBS_BUFSIZE_512 0x00000003
# define ADCBS_BUFSIZE_640 0x00000004
# define ADCBS_BUFSIZE_768 0x00000005
# define ADCBS_BUFSIZE_896 0x00000006
# define ADCBS_BUFSIZE_1024 0x00000007
# define ADCBS_BUFSIZE_1280 0x00000008
# define ADCBS_BUFSIZE_1536 0x00000009
# define ADCBS_BUFSIZE_1792 0x0000000a
# define ADCBS_BUFSIZE_2048 0x0000000b
# define ADCBS_BUFSIZE_2560 0x0000000c
# define ADCBS_BUFSIZE_3072 0x0000000d
# define ADCBS_BUFSIZE_3584 0x0000000e
# define ADCBS_BUFSIZE_4096 0x0000000f
# define ADCBS_BUFSIZE_5120 0x00000010
# define ADCBS_BUFSIZE_6144 0x00000011
# define ADCBS_BUFSIZE_7168 0x00000012
# define ADCBS_BUFSIZE_8192 0x00000013
# define ADCBS_BUFSIZE_10240 0x00000014
# define ADCBS_BUFSIZE_12288 0x00000015
# define ADCBS_BUFSIZE_14366 0x00000016
# define ADCBS_BUFSIZE_16384 0x00000017
# define ADCBS_BUFSIZE_20480 0x00000018
# define ADCBS_BUFSIZE_24576 0x00000019
# define ADCBS_BUFSIZE_28672 0x0000001a
# define ADCBS_BUFSIZE_32768 0x0000001b
# define ADCBS_BUFSIZE_40960 0x0000001c
# define ADCBS_BUFSIZE_49152 0x0000001d
# define ADCBS_BUFSIZE_57344 0x0000001e
# define ADCBS_BUFSIZE_65536 0x0000001f
# define CDCS 0x50 /* CD-ROM digital channel status register */
# define GPSCS 0x51 /* General Purpose SPDIF channel status register*/
# define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
# define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
# define A_DBG 0x53
# define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */
# define A_DBG_ZC 0x40000000 /* zero tram counter */
# define A_DBG_STEP_ADDR 0x000003ff
# define A_DBG_SATURATION_OCCURED 0x20000000
# define A_DBG_SATURATION_ADDR 0x0ffc0000
// NOTE: 0x54,55,56: 64-bit
# define SPCS0 0x54 /* SPDIF output Channel Status 0 register */
# define SPCS1 0x55 /* SPDIF output Channel Status 1 register */
# define SPCS2 0x56 /* SPDIF output Channel Status 2 register */
# define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */
# define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */
# define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */
# define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */
# define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */
# define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */
# define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */
# define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */
# define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */
# define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */
# define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */
# define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */
# define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */
# define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */
# define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */
# define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */
# define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */
# define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */
# define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */
# define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */
# define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */
# define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
# define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
# define CLIEL 0x58 /* Channel loop interrupt enable low register */
# define CLIEH 0x59 /* Channel loop interrupt enable high register */
# define CLIPL 0x5a /* Channel loop interrupt pending low register */
# define CLIPH 0x5b /* Channel loop interrupt pending high register */
# define SOLEL 0x5c /* Stop on loop enable low register */
# define SOLEH 0x5d /* Stop on loop enable high register */
# define SPBYPASS 0x5e /* SPDIF BYPASS mode register */
# define SPBYPASS_SPDIF0_MASK 0x00000003 /* SPDIF 0 bypass mode */
# define SPBYPASS_SPDIF1_MASK 0x0000000c /* SPDIF 1 bypass mode */
/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C */
# define SPBYPASS_FORMAT 0x00000f00 /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit */
# define AC97SLOT 0x5f /* additional AC97 slots enable bits */
# define AC97SLOT_REAR_RIGHT 0x01 /* Rear left */
# define AC97SLOT_REAR_LEFT 0x02 /* Rear right */
# define AC97SLOT_CNTR 0x10 /* Center enable */
# define AC97SLOT_LFE 0x20 /* LFE enable */
// NOTE: 0x60,61,62: 64-bit
# define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
# define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */
# define ZVSRCS 0x62 /* ZVideo sample rate converter status */
/* NOTE: This one has no SPDIFLOCKED field */
/* Assumes sample lock */
/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */
2005-04-10 01:38:25 +04:00
# define SRCS_SPDIFVALID 0x04000000 /* SPDIF stream valid */
2005-04-17 02:20:36 +04:00
# define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */
# define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */
# define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */
/* Note that these values can vary +/- by a small amount */
# define SRCS_SPDIFRATE_44 0x0003acd9
# define SRCS_SPDIFRATE_48 0x00040000
# define SRCS_SPDIFRATE_96 0x00080000
# define MICIDX 0x63 /* Microphone recording buffer index register */
# define MICIDX_MASK 0x0000ffff /* 16-bit value */
# define MICIDX_IDX 0x10000063
# define ADCIDX 0x64 /* ADC recording buffer index register */
# define ADCIDX_MASK 0x0000ffff /* 16 bit index field */
# define ADCIDX_IDX 0x10000064
# define A_ADCIDX 0x63
# define A_ADCIDX_IDX 0x10000063
# define A_MICIDX 0x64
# define A_MICIDX_IDX 0x10000064
# define FXIDX 0x65 /* FX recording buffer index register */
# define FXIDX_MASK 0x0000ffff /* 16-bit value */
# define FXIDX_IDX 0x10000065
/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status */
# define HLIEL 0x66 /* Channel half loop interrupt enable low register */
# define HLIEH 0x67 /* Channel half loop interrupt enable high register */
# define HLIPL 0x68 /* Channel half loop interrupt pending low register */
# define HLIPH 0x69 /* Channel half loop interrupt pending high register */
// 0x6a,6b,6c used for some recording
// 0x6d unused
// 0x6e,6f - tanktable base / offset
/* This is the MPU port on the card (via the game port) */
# define A_MUDATA1 0x70
# define A_MUCMD1 0x71
# define A_MUSTAT1 A_MUCMD1
/* This is the MPU port on the Audigy Drive */
# define A_MUDATA2 0x72
# define A_MUCMD2 0x73
# define A_MUSTAT2 A_MUCMD2
/* The next two are the Audigy equivalent of FXWC */
/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */
/* Each bit selects a channel for recording */
# define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */
# define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */
# define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */
2005-05-04 18:53:53 +04:00
# define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */
# define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */
# define A_SAMPLE_RATE_UNKNOWN 0xf0030001 /* Bits that can be set, but have unknown use. */
# define A_SPDIF_RATE_MASK 0x000000e0 /* Any other values for rates, just use 48000 */
2005-04-17 02:20:36 +04:00
# define A_SPDIF_48000 0x00000000
2005-05-04 18:53:53 +04:00
# define A_SPDIF_192000 0x00000020
2005-04-17 02:20:36 +04:00
# define A_SPDIF_96000 0x00000040
2005-05-04 18:53:53 +04:00
# define A_SPDIF_44100 0x00000080
# define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */
# define A_I2S_CAPTURE_48000 0x00000000 /* unclear if this sets the ADC rate as well. */
# define A_I2S_CAPTURE_192000 0x00000200
# define A_I2S_CAPTURE_96000 0x00000400
# define A_I2S_CAPTURE_44100 0x00000800
# define A_PCM_RATE_MASK 0x0000e000 /* This sets the playback PCM rate on the P16V */
# define A_PCM_48000 0x00000000
# define A_PCM_192000 0x00002000
# define A_PCM_96000 0x00004000
# define A_PCM_44100 0x00008000
2005-04-17 02:20:36 +04:00
/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */
/* 0x7a, 0x7b - lookup tables */
# define A_FXRT2 0x7c
# define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */
# define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */
# define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */
# define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */
# define A_SENDAMOUNTS 0x7d
# define A_FXSENDAMOUNT_E_MASK 0xFF000000
# define A_FXSENDAMOUNT_F_MASK 0x00FF0000
# define A_FXSENDAMOUNT_G_MASK 0x0000FF00
# define A_FXSENDAMOUNT_H_MASK 0x000000FF
/* 0x7c, 0x7e "high bit is used for filtering" */
/* The send amounts for this one are the same as used with the emu10k1 */
# define A_FXRT1 0x7e
# define A_FXRT_CHANNELA 0x0000003f
# define A_FXRT_CHANNELB 0x00003f00
# define A_FXRT_CHANNELC 0x003f0000
# define A_FXRT_CHANNELD 0x3f000000
/* Each FX general purpose register is 32 bits in length, all bits are used */
# define FXGPREGBASE 0x100 /* FX general purpose registers base */
# define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */
# define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */
# define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */
/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */
/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */
/* locations are for external TRAM. */
# define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */
# define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */
/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */
# define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */
# define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
# define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
# define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
# define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
# define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
# define MICROCODEBASE 0x400 /* Microcode data base address */
/* Each DSP microcode instruction is mapped into 2 doublewords */
/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */
# define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */
# define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */
# define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */
# define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */
# define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */
/* Audigy Soundcard have a different instruction format */
# define A_MICROCODEBASE 0x600
# define A_LOWORD_OPY_MASK 0x000007ff
# define A_LOWORD_OPX_MASK 0x007ff000
# define A_HIWORD_OPCODE_MASK 0x0f000000
# define A_HIWORD_RESULT_MASK 0x007ff000
# define A_HIWORD_OPA_MASK 0x000007ff
/* ------------------- STRUCTURES -------------------- */
typedef struct _snd_emu10k1 emu10k1_t ;
typedef struct _snd_emu10k1_voice emu10k1_voice_t ;
typedef struct _snd_emu10k1_pcm emu10k1_pcm_t ;
typedef enum {
EMU10K1_EFX ,
EMU10K1_PCM ,
EMU10K1_SYNTH ,
EMU10K1_MIDI
} emu10k1_voice_type_t ;
struct _snd_emu10k1_voice {
emu10k1_t * emu ;
int number ;
unsigned int use : 1 ,
pcm : 1 ,
efx : 1 ,
synth : 1 ,
midi : 1 ;
void ( * interrupt ) ( emu10k1_t * emu , emu10k1_voice_t * pvoice ) ;
emu10k1_pcm_t * epcm ;
} ;
typedef enum {
PLAYBACK_EMUVOICE ,
PLAYBACK_EFX ,
CAPTURE_AC97ADC ,
CAPTURE_AC97MIC ,
CAPTURE_EFX
} snd_emu10k1_pcm_type_t ;
struct _snd_emu10k1_pcm {
emu10k1_t * emu ;
snd_emu10k1_pcm_type_t type ;
snd_pcm_substream_t * substream ;
emu10k1_voice_t * voices [ NUM_EFX_PLAYBACK ] ;
emu10k1_voice_t * extra ;
unsigned short running ;
unsigned short first_ptr ;
snd_util_memblk_t * memblk ;
unsigned int start_addr ;
unsigned int ccca_start_addr ;
unsigned int capture_ipr ; /* interrupt acknowledge mask */
unsigned int capture_inte ; /* interrupt enable mask */
unsigned int capture_ba_reg ; /* buffer address register */
unsigned int capture_bs_reg ; /* buffer size register */
unsigned int capture_idx_reg ; /* buffer index register */
unsigned int capture_cr_val ; /* control value */
unsigned int capture_cr_val2 ; /* control value2 (for audigy) */
unsigned int capture_bs_val ; /* buffer size value */
unsigned int capture_bufsize ; /* buffer size in bytes */
} ;
typedef struct {
/* mono, left, right x 8 sends (4 on emu10k1) */
unsigned char send_routing [ 3 ] [ 8 ] ;
unsigned char send_volume [ 3 ] [ 8 ] ;
unsigned short attn [ 3 ] ;
emu10k1_pcm_t * epcm ;
} emu10k1_pcm_mixer_t ;
# define snd_emu10k1_compose_send_routing(route) \
( ( route [ 0 ] | ( route [ 1 ] < < 4 ) | ( route [ 2 ] < < 8 ) | ( route [ 3 ] < < 12 ) ) < < 16 )
# define snd_emu10k1_compose_audigy_fxrt1(route) \
( ( unsigned int ) route [ 0 ] | ( ( unsigned int ) route [ 1 ] < < 8 ) | ( ( unsigned int ) route [ 2 ] < < 16 ) | ( ( unsigned int ) route [ 3 ] < < 24 ) )
# define snd_emu10k1_compose_audigy_fxrt2(route) \
( ( unsigned int ) route [ 4 ] | ( ( unsigned int ) route [ 5 ] < < 8 ) | ( ( unsigned int ) route [ 6 ] < < 16 ) | ( ( unsigned int ) route [ 7 ] < < 24 ) )
typedef struct snd_emu10k1_memblk {
snd_util_memblk_t mem ;
/* private part */
int first_page , last_page , pages , mapped_page ;
unsigned int map_locked ;
struct list_head mapped_link ;
struct list_head mapped_order_link ;
} emu10k1_memblk_t ;
# define snd_emu10k1_memblk_offset(blk) (((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
# define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE 16
typedef struct {
struct list_head list ; /* list link container */
unsigned int vcount ;
unsigned int count ; /* count of GPR (1..16) */
unsigned short gpr [ 32 ] ; /* GPR number(s) */
unsigned int value [ 32 ] ;
unsigned int min ; /* minimum range */
unsigned int max ; /* maximum range */
unsigned int translation ; /* translation type (EMU10K1_GPR_TRANSLATION*) */
snd_kcontrol_t * kcontrol ;
} snd_emu10k1_fx8010_ctl_t ;
typedef void ( snd_fx8010_irq_handler_t ) ( emu10k1_t * emu , void * private_data ) ;
typedef struct _snd_emu10k1_fx8010_irq {
struct _snd_emu10k1_fx8010_irq * next ;
snd_fx8010_irq_handler_t * handler ;
unsigned short gpr_running ;
void * private_data ;
} snd_emu10k1_fx8010_irq_t ;
typedef struct {
unsigned int valid : 1 ,
opened : 1 ,
active : 1 ;
unsigned int channels ; /* 16-bit channels count */
unsigned int tram_start ; /* initial ring buffer position in TRAM (in samples) */
unsigned int buffer_size ; /* count of buffered samples */
unsigned short gpr_size ; /* GPR containing size of ring buffer in samples (host) */
unsigned short gpr_ptr ; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
unsigned short gpr_count ; /* GPR containing count of samples between two interrupts (host) */
unsigned short gpr_tmpcount ; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
unsigned short gpr_trigger ; /* GPR containing trigger (activate) information (host) */
unsigned short gpr_running ; /* GPR containing info if PCM is running (FX8010) */
unsigned char etram [ 32 ] ; /* external TRAM address & data */
snd_pcm_indirect_t pcm_rec ;
unsigned int tram_pos ;
unsigned int tram_shift ;
snd_emu10k1_fx8010_irq_t * irq ;
} snd_emu10k1_fx8010_pcm_t ;
typedef struct {
unsigned short fxbus_mask ; /* used FX buses (bitmask) */
unsigned short extin_mask ; /* used external inputs (bitmask) */
unsigned short extout_mask ; /* used external outputs (bitmask) */
unsigned short pad1 ;
unsigned int itram_size ; /* internal TRAM size in samples */
struct snd_dma_buffer etram_pages ; /* external TRAM pages and size */
unsigned int dbg ; /* FX debugger register */
unsigned char name [ 128 ] ;
int gpr_size ; /* size of allocated GPR controls */
int gpr_count ; /* count of used kcontrols */
struct list_head gpr_ctl ; /* GPR controls */
struct semaphore lock ;
snd_emu10k1_fx8010_pcm_t pcm [ 8 ] ;
spinlock_t irq_lock ;
snd_emu10k1_fx8010_irq_t * irq_handlers ;
} snd_emu10k1_fx8010_t ;
# define emu10k1_gpr_ctl(n) list_entry(n, snd_emu10k1_fx8010_ctl_t, list)
typedef struct {
struct _snd_emu10k1 * emu ;
snd_rawmidi_t * rmidi ;
snd_rawmidi_substream_t * substream_input ;
snd_rawmidi_substream_t * substream_output ;
unsigned int midi_mode ;
spinlock_t input_lock ;
spinlock_t output_lock ;
spinlock_t open_lock ;
int tx_enable , rx_enable ;
int port ;
int ipr_tx , ipr_rx ;
void ( * interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
} emu10k1_midi_t ;
typedef struct {
u32 vendor ;
u32 device ;
u32 subsystem ;
2005-04-07 17:48:42 +04:00
unsigned char revision ;
2005-04-17 02:20:36 +04:00
unsigned char emu10k1_chip ; /* Original SB Live. Not SB Live 24bit. */
unsigned char emu10k2_chip ; /* Audigy 1 or Audigy 2. */
unsigned char ca0102_chip ; /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
unsigned char ca0108_chip ; /* Audigy 2 Value */
unsigned char ca0151_chip ; /* P16V */
unsigned char spk71 ; /* Has 7.1 speakers */
2005-03-30 15:51:18 +04:00
unsigned char sblive51 ; /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */
2005-04-17 02:20:36 +04:00
unsigned char spdif_bug ; /* Has Spdif phasing bug */
2005-09-30 18:56:59 +04:00
unsigned char ac97_chip ; /* Has an AC97 chip: 1 = mandatory, 2 = optional */
2005-04-17 02:20:36 +04:00
unsigned char ecard ; /* APS EEPROM */
2005-03-30 16:22:25 +04:00
const char * driver ;
const char * name ;
const char * id ; /* for backward compatibility - can be NULL if not needed */
2005-04-17 02:20:36 +04:00
} emu_chip_details_t ;
struct _snd_emu10k1 {
int irq ;
unsigned long port ; /* I/O port number */
2005-03-30 15:51:18 +04:00
unsigned int tos_link : 1 , /* tos link detected */
rear_ac97 : 1 ; /* rear channels are on AC'97 */
2005-04-17 02:20:36 +04:00
const emu_chip_details_t * card_capabilities ; /* Contains profile of card capabilities */
unsigned int audigy ; /* is Audigy? */
unsigned int revision ; /* chip revision */
unsigned int serial ; /* serial number */
unsigned short model ; /* subsystem id */
unsigned int card_type ; /* EMU10K1_CARD_* */
unsigned int ecard_ctrl ; /* ecard control bits */
unsigned long dma_mask ; /* PCI DMA mask */
int max_cache_pages ; /* max memory size / PAGE_SIZE */
struct snd_dma_buffer silent_page ; /* silent page */
struct snd_dma_buffer ptb_pages ; /* page table pages */
struct snd_dma_device p16v_dma_dev ;
struct snd_dma_buffer p16v_buffer ;
snd_util_memhdr_t * memhdr ; /* page allocation list */
emu10k1_memblk_t * reserved_page ; /* reserved page */
struct list_head mapped_link_head ;
struct list_head mapped_order_link_head ;
void * * page_ptr_table ;
unsigned long * page_addr_table ;
spinlock_t memblk_lock ;
unsigned int spdif_bits [ 3 ] ; /* s/pdif out setup */
snd_emu10k1_fx8010_t fx8010 ; /* FX8010 info */
int gpr_base ;
ac97_t * ac97 ;
struct pci_dev * pci ;
snd_card_t * card ;
snd_pcm_t * pcm ;
snd_pcm_t * pcm_mic ;
snd_pcm_t * pcm_efx ;
snd_pcm_t * pcm_p16v ;
spinlock_t synth_lock ;
void * synth ;
int ( * get_synth_voice ) ( emu10k1_t * emu ) ;
spinlock_t reg_lock ;
spinlock_t emu_lock ;
spinlock_t voice_lock ;
struct semaphore ptb_lock ;
emu10k1_voice_t voices [ NUM_G ] ;
emu10k1_voice_t p16v_voices [ 4 ] ;
2005-03-26 21:35:29 +03:00
emu10k1_voice_t p16v_capture_voice ;
2005-04-17 02:20:36 +04:00
int p16v_device_offset ;
2005-03-26 21:35:29 +03:00
u32 p16v_capture_source ;
2005-05-07 17:34:13 +04:00
u32 p16v_capture_channel ;
2005-04-17 02:20:36 +04:00
emu10k1_pcm_mixer_t pcm_mixer [ 32 ] ;
emu10k1_pcm_mixer_t efx_pcm_mixer [ NUM_EFX_PLAYBACK ] ;
snd_kcontrol_t * ctl_send_routing ;
snd_kcontrol_t * ctl_send_volume ;
snd_kcontrol_t * ctl_attn ;
snd_kcontrol_t * ctl_efx_send_routing ;
snd_kcontrol_t * ctl_efx_send_volume ;
snd_kcontrol_t * ctl_efx_attn ;
void ( * hwvol_interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
void ( * capture_interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
void ( * capture_mic_interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
void ( * capture_efx_interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
void ( * spdif_interrupt ) ( emu10k1_t * emu , unsigned int status ) ;
void ( * dsp_interrupt ) ( emu10k1_t * emu ) ;
snd_pcm_substream_t * pcm_capture_substream ;
snd_pcm_substream_t * pcm_capture_mic_substream ;
snd_pcm_substream_t * pcm_capture_efx_substream ;
snd_pcm_substream_t * pcm_playback_efx_substream ;
snd_timer_t * timer ;
emu10k1_midi_t midi ;
emu10k1_midi_t midi2 ; /* for audigy */
unsigned int efx_voices_mask [ 2 ] ;
unsigned int next_free_voice ;
} ;
int snd_emu10k1_create ( snd_card_t * card ,
struct pci_dev * pci ,
unsigned short extin_mask ,
unsigned short extout_mask ,
long max_cache_bytes ,
int enable_ir ,
2005-07-07 00:21:51 +04:00
uint subsystem ,
2005-04-17 02:20:36 +04:00
emu10k1_t * * remu ) ;
int snd_emu10k1_pcm ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
int snd_emu10k1_pcm_mic ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
int snd_emu10k1_pcm_efx ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
int snd_p16v_pcm ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
int snd_p16v_free ( emu10k1_t * emu ) ;
int snd_p16v_mixer ( emu10k1_t * emu ) ;
int snd_emu10k1_pcm_multi ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
int snd_emu10k1_fx8010_pcm ( emu10k1_t * emu , int device , snd_pcm_t * * rpcm ) ;
[ALSA] sound - fix .iface field of mixer control elements
Documentation,CS46xx driver,EMU10K1/EMU10K2 driver,AD1848 driver
SB16/AWE driver,CMIPCI driver,ENS1370/1+ driver,RME32 driver
RME96 driver,ICE1712 driver,ICE1724 driver,KORG1212 driver
RME HDSP driver,RME9652 driver
This patch changes .iface to SNDRV_CTL_ELEM_IFACE_MIXER whre _PCM or
_HWDEP was used in controls that are not associated with a specific PCM
(sub)stream or hwdep device, and changes some controls that got
inconsitent .iface values due to copy+paste errors. Furthermore, it
makes sure that all control that do use _PCM or _HWDEP use the correct
number in the .device field.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2005-07-29 17:32:58 +04:00
int snd_emu10k1_mixer ( emu10k1_t * emu , int pcm_device , int multi_device ) ;
2005-04-17 02:20:36 +04:00
int snd_emu10k1_timer ( emu10k1_t * emu , int device ) ;
int snd_emu10k1_fx8010_new ( emu10k1_t * emu , int device , snd_hwdep_t * * rhwdep ) ;
irqreturn_t snd_emu10k1_interrupt ( int irq , void * dev_id , struct pt_regs * regs ) ;
/* initialization */
void snd_emu10k1_voice_init ( emu10k1_t * emu , int voice ) ;
int snd_emu10k1_init_efx ( emu10k1_t * emu ) ;
void snd_emu10k1_free_efx ( emu10k1_t * emu ) ;
int snd_emu10k1_fx8010_tram_setup ( emu10k1_t * emu , u32 size ) ;
/* I/O functions */
unsigned int snd_emu10k1_ptr_read ( emu10k1_t * emu , unsigned int reg , unsigned int chn ) ;
void snd_emu10k1_ptr_write ( emu10k1_t * emu , unsigned int reg , unsigned int chn , unsigned int data ) ;
unsigned int snd_emu10k1_ptr20_read ( emu10k1_t * emu , unsigned int reg , unsigned int chn ) ;
void snd_emu10k1_ptr20_write ( emu10k1_t * emu , unsigned int reg , unsigned int chn , unsigned int data ) ;
unsigned int snd_emu10k1_efx_read ( emu10k1_t * emu , unsigned int pc ) ;
void snd_emu10k1_intr_enable ( emu10k1_t * emu , unsigned int intrenb ) ;
void snd_emu10k1_intr_disable ( emu10k1_t * emu , unsigned int intrenb ) ;
void snd_emu10k1_voice_intr_enable ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_intr_disable ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_intr_ack ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_half_loop_intr_enable ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_half_loop_intr_disable ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_half_loop_intr_ack ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_set_loop_stop ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_voice_clear_loop_stop ( emu10k1_t * emu , unsigned int voicenum ) ;
void snd_emu10k1_wait ( emu10k1_t * emu , unsigned int wait ) ;
static inline unsigned int snd_emu10k1_wc ( emu10k1_t * emu ) { return ( inl ( emu - > port + WC ) > > 6 ) & 0xfffff ; }
unsigned short snd_emu10k1_ac97_read ( ac97_t * ac97 , unsigned short reg ) ;
void snd_emu10k1_ac97_write ( ac97_t * ac97 , unsigned short reg , unsigned short data ) ;
unsigned int snd_emu10k1_rate_to_pitch ( unsigned int rate ) ;
/* memory allocation */
snd_util_memblk_t * snd_emu10k1_alloc_pages ( emu10k1_t * emu , snd_pcm_substream_t * substream ) ;
int snd_emu10k1_free_pages ( emu10k1_t * emu , snd_util_memblk_t * blk ) ;
snd_util_memblk_t * snd_emu10k1_synth_alloc ( emu10k1_t * emu , unsigned int size ) ;
int snd_emu10k1_synth_free ( emu10k1_t * emu , snd_util_memblk_t * blk ) ;
int snd_emu10k1_synth_bzero ( emu10k1_t * emu , snd_util_memblk_t * blk , int offset , int size ) ;
int snd_emu10k1_synth_copy_from_user ( emu10k1_t * emu , snd_util_memblk_t * blk , int offset , const char __user * data , int size ) ;
int snd_emu10k1_memblk_map ( emu10k1_t * emu , emu10k1_memblk_t * blk ) ;
/* voice allocation */
int snd_emu10k1_voice_alloc ( emu10k1_t * emu , emu10k1_voice_type_t type , int pair , emu10k1_voice_t * * rvoice ) ;
int snd_emu10k1_voice_free ( emu10k1_t * emu , emu10k1_voice_t * pvoice ) ;
/* MIDI uart */
int snd_emu10k1_midi ( emu10k1_t * emu ) ;
int snd_emu10k1_audigy_midi ( emu10k1_t * emu ) ;
/* proc interface */
int snd_emu10k1_proc_init ( emu10k1_t * emu ) ;
/* fx8010 irq handler */
int snd_emu10k1_fx8010_register_irq_handler ( emu10k1_t * emu ,
snd_fx8010_irq_handler_t * handler ,
unsigned char gpr_running ,
void * private_data ,
snd_emu10k1_fx8010_irq_t * * r_irq ) ;
int snd_emu10k1_fx8010_unregister_irq_handler ( emu10k1_t * emu ,
snd_emu10k1_fx8010_irq_t * irq ) ;
# endif /* __KERNEL__ */
/*
* - - - - FX8010 - - - -
*/
# define EMU10K1_CARD_CREATIVE 0x00000000
# define EMU10K1_CARD_EMUAPS 0x00000001
# define EMU10K1_FX8010_PCM_COUNT 8
/* instruction set */
# define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */
# define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */
# define iMAC2 0x02 /* R = A + (X * Y >> 31) ; wraparound */
# define iMAC3 0x03 /* R = A + (-X * Y >> 31) ; wraparound */
# define iMACINT0 0x04 /* R = A + X * Y ; saturation */
# define iMACINT1 0x05 /* R = A + X * Y ; wraparound (31-bit) */
# define iACC3 0x06 /* R = A + X + Y ; saturation */
# define iMACMV 0x07 /* R = A, acc += X * Y >> 31 */
# define iANDXOR 0x08 /* R = (A & X) ^ Y */
# define iTSTNEG 0x09 /* R = (A >= Y) ? X : ~X */
# define iLIMITGE 0x0a /* R = (A >= Y) ? X : Y */
# define iLIMITLT 0x0b /* R = (A < Y) ? X : Y */
# define iLOG 0x0c /* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
# define iEXP 0x0d /* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
# define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */
# define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */
/* GPRs */
# define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */
# define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */
# define EXTOUT(x) (0x20 + (x)) /* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
# define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
/* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
# define C_00000000 0x40
# define C_00000001 0x41
# define C_00000002 0x42
# define C_00000003 0x43
# define C_00000004 0x44
# define C_00000008 0x45
# define C_00000010 0x46
# define C_00000020 0x47
# define C_00000100 0x48
# define C_00010000 0x49
# define C_00080000 0x4a
# define C_10000000 0x4b
# define C_20000000 0x4c
# define C_40000000 0x4d
# define C_80000000 0x4e
# define C_7fffffff 0x4f
# define C_ffffffff 0x50
# define C_fffffffe 0x51
# define C_c0000000 0x52
# define C_4f1bbcdc 0x53
# define C_5a7ef9db 0x54
# define C_00100000 0x55 /* ?? */
# define GPR_ACCU 0x56 /* ACCUM, accumulator */
# define GPR_COND 0x57 /* CCR, condition register */
# define GPR_NOISE0 0x58 /* noise source */
# define GPR_NOISE1 0x59 /* noise source */
# define GPR_IRQ 0x5a /* IRQ register */
# define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */
# define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
# define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
# define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
# define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
# define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
# define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
# define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
# define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
# define A_ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
# define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
# define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
# define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */
# define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */
# define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
# define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */
# define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
# define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
# define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
# define A_GPR(x) (A_FXGPREGBASE + (x))
/* cc_reg constants */
# define CC_REG_NORMALIZED C_00000001
# define CC_REG_BORROW C_00000002
# define CC_REG_MINUS C_00000004
# define CC_REG_ZERO C_00000008
# define CC_REG_SATURATE C_00000010
# define CC_REG_NONZERO C_00000100
/* FX buses */
# define FXBUS_PCM_LEFT 0x00
# define FXBUS_PCM_RIGHT 0x01
# define FXBUS_PCM_LEFT_REAR 0x02
# define FXBUS_PCM_RIGHT_REAR 0x03
# define FXBUS_MIDI_LEFT 0x04
# define FXBUS_MIDI_RIGHT 0x05
# define FXBUS_PCM_CENTER 0x06
# define FXBUS_PCM_LFE 0x07
# define FXBUS_PCM_LEFT_FRONT 0x08
# define FXBUS_PCM_RIGHT_FRONT 0x09
# define FXBUS_MIDI_REVERB 0x0c
# define FXBUS_MIDI_CHORUS 0x0d
# define FXBUS_PCM_LEFT_SIDE 0x0e
# define FXBUS_PCM_RIGHT_SIDE 0x0f
# define FXBUS_PT_LEFT 0x14
# define FXBUS_PT_RIGHT 0x15
/* Inputs */
# define EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
# define EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
# define EXTIN_SPDIF_CD_L 0x02 /* internal S/PDIF CD - onboard - left */
# define EXTIN_SPDIF_CD_R 0x03 /* internal S/PDIF CD - onboard - right */
# define EXTIN_ZOOM_L 0x04 /* Zoom Video I2S - left */
# define EXTIN_ZOOM_R 0x05 /* Zoom Video I2S - right */
# define EXTIN_TOSLINK_L 0x06 /* LiveDrive - TOSLink Optical - left */
# define EXTIN_TOSLINK_R 0x07 /* LiveDrive - TOSLink Optical - right */
# define EXTIN_LINE1_L 0x08 /* LiveDrive - Line/Mic 1 - left */
# define EXTIN_LINE1_R 0x09 /* LiveDrive - Line/Mic 1 - right */
# define EXTIN_COAX_SPDIF_L 0x0a /* LiveDrive - Coaxial S/PDIF - left */
# define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
# define EXTIN_LINE2_L 0x0c /* LiveDrive - Line/Mic 2 - left */
# define EXTIN_LINE2_R 0x0d /* LiveDrive - Line/Mic 2 - right */
/* Outputs */
# define EXTOUT_AC97_L 0x00 /* AC'97 playback channel - left */
# define EXTOUT_AC97_R 0x01 /* AC'97 playback channel - right */
# define EXTOUT_TOSLINK_L 0x02 /* LiveDrive - TOSLink Optical - left */
# define EXTOUT_TOSLINK_R 0x03 /* LiveDrive - TOSLink Optical - right */
# define EXTOUT_AC97_CENTER 0x04 /* SB Live 5.1 - center */
# define EXTOUT_AC97_LFE 0x05 /* SB Live 5.1 - LFE */
# define EXTOUT_HEADPHONE_L 0x06 /* LiveDrive - Headphone - left */
# define EXTOUT_HEADPHONE_R 0x07 /* LiveDrive - Headphone - right */
# define EXTOUT_REAR_L 0x08 /* Rear channel - left */
# define EXTOUT_REAR_R 0x09 /* Rear channel - right */
# define EXTOUT_ADC_CAP_L 0x0a /* ADC Capture buffer - left */
# define EXTOUT_ADC_CAP_R 0x0b /* ADC Capture buffer - right */
# define EXTOUT_MIC_CAP 0x0c /* MIC Capture buffer */
# define EXTOUT_AC97_REAR_L 0x0d /* SB Live 5.1 (c) 2003 - Rear Left */
# define EXTOUT_AC97_REAR_R 0x0e /* SB Live 5.1 (c) 2003 - Rear Right */
# define EXTOUT_ACENTER 0x11 /* Analog Center */
# define EXTOUT_ALFE 0x12 /* Analog LFE */
/* Audigy Inputs */
# define A_EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
# define A_EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
# define A_EXTIN_SPDIF_CD_L 0x02 /* digital CD left */
# define A_EXTIN_SPDIF_CD_R 0x03 /* digital CD left */
# define A_EXTIN_OPT_SPDIF_L 0x04 /* audigy drive Optical SPDIF - left */
# define A_EXTIN_OPT_SPDIF_R 0x05 /* right */
# define A_EXTIN_LINE2_L 0x08 /* audigy drive line2/mic2 - left */
# define A_EXTIN_LINE2_R 0x09 /* right */
# define A_EXTIN_ADC_L 0x0a /* Philips ADC - left */
# define A_EXTIN_ADC_R 0x0b /* right */
# define A_EXTIN_AUX2_L 0x0c /* audigy drive aux2 - left */
# define A_EXTIN_AUX2_R 0x0d /* - right */
/* Audigiy Outputs */
# define A_EXTOUT_FRONT_L 0x00 /* digital front left */
# define A_EXTOUT_FRONT_R 0x01 /* right */
# define A_EXTOUT_CENTER 0x02 /* digital front center */
# define A_EXTOUT_LFE 0x03 /* digital front lfe */
# define A_EXTOUT_HEADPHONE_L 0x04 /* headphone audigy drive left */
# define A_EXTOUT_HEADPHONE_R 0x05 /* right */
# define A_EXTOUT_REAR_L 0x06 /* digital rear left */
# define A_EXTOUT_REAR_R 0x07 /* right */
# define A_EXTOUT_AFRONT_L 0x08 /* analog front left */
# define A_EXTOUT_AFRONT_R 0x09 /* right */
# define A_EXTOUT_ACENTER 0x0a /* analog center */
# define A_EXTOUT_ALFE 0x0b /* analog LFE */
# define A_EXTOUT_ASIDE_L 0x0c /* analog side left - Audigy 2 ZS */
# define A_EXTOUT_ASIDE_R 0x0d /* right - Audigy 2 ZS */
# define A_EXTOUT_AREAR_L 0x0e /* analog rear left */
# define A_EXTOUT_AREAR_R 0x0f /* right */
# define A_EXTOUT_AC97_L 0x10 /* AC97 left (front) */
# define A_EXTOUT_AC97_R 0x11 /* right */
# define A_EXTOUT_ADC_CAP_L 0x16 /* ADC capture buffer left */
# define A_EXTOUT_ADC_CAP_R 0x17 /* right */
# define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */
/* Audigy constants */
# define A_C_00000000 0xc0
# define A_C_00000001 0xc1
# define A_C_00000002 0xc2
# define A_C_00000003 0xc3
# define A_C_00000004 0xc4
# define A_C_00000008 0xc5
# define A_C_00000010 0xc6
# define A_C_00000020 0xc7
# define A_C_00000100 0xc8
# define A_C_00010000 0xc9
# define A_C_00000800 0xca
# define A_C_10000000 0xcb
# define A_C_20000000 0xcc
# define A_C_40000000 0xcd
# define A_C_80000000 0xce
# define A_C_7fffffff 0xcf
# define A_C_ffffffff 0xd0
# define A_C_fffffffe 0xd1
# define A_C_c0000000 0xd2
# define A_C_4f1bbcdc 0xd3
# define A_C_5a7ef9db 0xd4
# define A_C_00100000 0xd5
# define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */
# define A_GPR_COND 0xd7 /* CCR, condition register */
# define A_GPR_NOISE0 0xd8 /* noise source */
# define A_GPR_NOISE1 0xd9 /* noise source */
# define A_GPR_IRQ 0xda /* IRQ register */
# define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */
# define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */
/* definitions for debug register */
# define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */
# define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */
# define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */
# define EMU10K1_DBG_SINGLE_STEP 0x00008000 /* single step mode */
# define EMU10K1_DBG_STEP 0x00004000 /* start single step */
# define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */
# define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */
/* tank memory address line */
# ifndef __KERNEL__
# define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
# define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
# define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
# define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
# define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
# endif
typedef struct {
unsigned int internal_tram_size ; /* in samples */
unsigned int external_tram_size ; /* in samples */
char fxbus_names [ 16 ] [ 32 ] ; /* names of FXBUSes */
char extin_names [ 16 ] [ 32 ] ; /* names of external inputs */
char extout_names [ 32 ] [ 32 ] ; /* names of external outputs */
unsigned int gpr_controls ; /* count of GPR controls */
} emu10k1_fx8010_info_t ;
# define EMU10K1_GPR_TRANSLATION_NONE 0
# define EMU10K1_GPR_TRANSLATION_TABLE100 1
# define EMU10K1_GPR_TRANSLATION_BASS 2
# define EMU10K1_GPR_TRANSLATION_TREBLE 3
# define EMU10K1_GPR_TRANSLATION_ONOFF 4
typedef struct {
snd_ctl_elem_id_t id ; /* full control ID definition */
unsigned int vcount ; /* visible count */
unsigned int count ; /* count of GPR (1..16) */
unsigned short gpr [ 32 ] ; /* GPR number(s) */
unsigned int value [ 32 ] ; /* initial values */
unsigned int min ; /* minimum range */
unsigned int max ; /* maximum range */
unsigned int translation ; /* translation type (EMU10K1_GPR_TRANSLATION*) */
} emu10k1_fx8010_control_gpr_t ;
typedef struct {
char name [ 128 ] ;
DECLARE_BITMAP ( gpr_valid , 0x200 ) ; /* bitmask of valid initializers */
u_int32_t __user * gpr_map ; /* initializers */
unsigned int gpr_add_control_count ; /* count of GPR controls to add/replace */
emu10k1_fx8010_control_gpr_t __user * gpr_add_controls ; /* GPR controls to add/replace */
unsigned int gpr_del_control_count ; /* count of GPR controls to remove */
snd_ctl_elem_id_t __user * gpr_del_controls ; /* IDs of GPR controls to remove */
unsigned int gpr_list_control_count ; /* count of GPR controls to list */
unsigned int gpr_list_control_total ; /* total count of GPR controls */
emu10k1_fx8010_control_gpr_t __user * gpr_list_controls ; /* listed GPR controls */
DECLARE_BITMAP ( tram_valid , 0x100 ) ; /* bitmask of valid initializers */
u_int32_t __user * tram_data_map ; /* data initializers */
u_int32_t __user * tram_addr_map ; /* map initializers */
DECLARE_BITMAP ( code_valid , 1024 ) ; /* bitmask of valid instructions */
u_int32_t __user * code ; /* one instruction - 64 bits */
} emu10k1_fx8010_code_t ;
typedef struct {
unsigned int address ; /* 31.bit == 1 -> external TRAM */
unsigned int size ; /* size in samples (4 bytes) */
unsigned int * samples ; /* pointer to samples (20-bit) */
/* NULL->clear memory */
} emu10k1_fx8010_tram_t ;
typedef struct {
unsigned int substream ; /* substream number */
unsigned int res1 ; /* reserved */
unsigned int channels ; /* 16-bit channels count, zero = remove this substream */
unsigned int tram_start ; /* ring buffer position in TRAM (in samples) */
unsigned int buffer_size ; /* count of buffered samples */
unsigned short gpr_size ; /* GPR containing size of ringbuffer in samples (host) */
unsigned short gpr_ptr ; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
unsigned short gpr_count ; /* GPR containing count of samples between two interrupts (host) */
unsigned short gpr_tmpcount ; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
unsigned short gpr_trigger ; /* GPR containing trigger (activate) information (host) */
unsigned short gpr_running ; /* GPR containing info if PCM is running (FX8010) */
unsigned char pad ; /* reserved */
unsigned char etram [ 32 ] ; /* external TRAM address & data (one per channel) */
unsigned int res2 ; /* reserved */
} emu10k1_fx8010_pcm_t ;
# define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, emu10k1_fx8010_info_t)
# define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, emu10k1_fx8010_code_t)
# define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, emu10k1_fx8010_code_t)
# define SNDRV_EMU10K1_IOCTL_TRAM_SETUP _IOW ('H', 0x20, int)
# define SNDRV_EMU10K1_IOCTL_TRAM_POKE _IOW ('H', 0x21, emu10k1_fx8010_tram_t)
# define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, emu10k1_fx8010_tram_t)
# define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, emu10k1_fx8010_pcm_t)
# define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, emu10k1_fx8010_pcm_t)
# define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80)
# define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81)
# define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
# define SNDRV_EMU10K1_IOCTL_SINGLE_STEP _IOW ('H', 0x83, int)
# define SNDRV_EMU10K1_IOCTL_DBG_READ _IOR ('H', 0x84, int)
# endif /* __SOUND_EMU10K1_H */
