linux/tools/perf/util/debug.c

295 lines
5.8 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/* For general debugging purposes */
#include <inttypes.h>
#include <string.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/wait.h>
#include <api/debug.h>
#include <linux/kernel.h>
#include <linux/time64.h>
#include <sys/time.h>
#ifdef HAVE_BACKTRACE_SUPPORT
#include <execinfo.h>
#endif
#include "color.h"
#include "event.h"
#include "debug.h"
#include "print_binary.h"
#include "target.h"
#include "ui/helpline.h"
#include "ui/ui.h"
#include "util/parse-sublevel-options.h"
#include <linux/ctype.h>
int verbose;
perf tool: Provide an option to print perf_event_open args and return value Perf record with verbose=2 already prints this information along with whole lot of other traces which requires lot of scrolling. Introduce an option to print only perf_event_open() arguments and return value. Sample o/p: $ perf --debug perf-event-open=1 record -- ls > /dev/null ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID disabled 1 inherit 1 exclude_kernel 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ sys_perf_event_open: pid 4308 cpu 0 group_fd -1 flags 0x8 = 4 sys_perf_event_open: pid 4308 cpu 1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 4308 cpu 2 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid 4308 cpu 3 group_fd -1 flags 0x8 = 8 sys_perf_event_open: pid 4308 cpu 4 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid 4308 cpu 5 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid 4308 cpu 6 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid 4308 cpu 7 group_fd -1 flags 0x8 = 12 ------------------------------------------------------------ perf_event_attr: type 1 size 112 config 0x9 watermark 1 sample_id_all 1 bpf_event 1 { wakeup_events, wakeup_watermark } 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -13 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ] Committer notes: Just like the 'verbose' variable this new 'debug_peo_args' needs to be added to util/python.c, since we don't link the debug.o file in the python binding, which ended up making 'perf test python' fail with: # perf test -v python 18: 'import perf' in python : --- start --- test child forked, pid 19237 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.so: undefined symbol: debug_peo_args test child finished with -1 ---- end ---- 'import perf' in python: FAILED! # After adding that new variable to util/python.c: # perf test -v python 18: 'import perf' in python : --- start --- test child forked, pid 22364 test child finished with 0 ---- end ---- 'import perf' in python: Ok # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lore.kernel.org/lkml/20191108094128.28769-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-08 12:41:28 +03:00
int debug_peo_args;
bool dump_trace = false, quiet = false;
int debug_ordered_events;
static int redirect_to_stderr;
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:17:00 +03:00
int debug_data_convert;
static FILE *debug_file;
bool debug_display_time;
void debug_set_file(FILE *file)
{
debug_file = file;
}
void debug_set_display_time(bool set)
{
debug_display_time = set;
}
static int fprintf_time(FILE *file)
{
struct timeval tod;
struct tm ltime;
char date[64];
if (!debug_display_time)
return 0;
if (gettimeofday(&tod, NULL) != 0)
return 0;
if (localtime_r(&tod.tv_sec, &ltime) == NULL)
return 0;
strftime(date, sizeof(date), "%F %H:%M:%S", &ltime);
return fprintf(file, "[%s.%06lu] ", date, (long)tod.tv_usec);
}
int veprintf(int level, int var, const char *fmt, va_list args)
{
int ret = 0;
if (var >= level) {
if (use_browser >= 1 && !redirect_to_stderr) {
ui_helpline__vshow(fmt, args);
} else {
ret = fprintf_time(debug_file);
ret += vfprintf(debug_file, fmt, args);
}
}
return ret;
}
int eprintf(int level, int var, const char *fmt, ...)
{
va_list args;
int ret;
va_start(args, fmt);
ret = veprintf(level, var, fmt, args);
va_end(args);
return ret;
}
static int veprintf_time(u64 t, const char *fmt, va_list args)
{
int ret = 0;
u64 secs, usecs, nsecs = t;
secs = nsecs / NSEC_PER_SEC;
nsecs -= secs * NSEC_PER_SEC;
usecs = nsecs / NSEC_PER_USEC;
ret = fprintf(stderr, "[%13" PRIu64 ".%06" PRIu64 "] ",
secs, usecs);
ret += vfprintf(stderr, fmt, args);
return ret;
}
int eprintf_time(int level, int var, u64 t, const char *fmt, ...)
{
int ret = 0;
va_list args;
if (var >= level) {
va_start(args, fmt);
ret = veprintf_time(t, fmt, args);
va_end(args);
}
return ret;
}
/*
* Overloading libtraceevent standard info print
* function, display with -v in perf.
*/
void pr_stat(const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
veprintf(1, verbose, fmt, args);
va_end(args);
eprintf(1, verbose, "\n");
}
int dump_printf(const char *fmt, ...)
{
va_list args;
int ret = 0;
if (dump_trace) {
va_start(args, fmt);
ret = vprintf(fmt, args);
va_end(args);
}
return ret;
}
static int trace_event_printer(enum binary_printer_ops op,
unsigned int val, void *extra, FILE *fp)
{
const char *color = PERF_COLOR_BLUE;
union perf_event *event = (union perf_event *)extra;
unsigned char ch = (unsigned char)val;
int printed = 0;
switch (op) {
case BINARY_PRINT_DATA_BEGIN:
printed += fprintf(fp, ".");
printed += color_fprintf(fp, color, "\n. ... raw event: size %d bytes\n",
event->header.size);
break;
case BINARY_PRINT_LINE_BEGIN:
printed += fprintf(fp, ".");
break;
case BINARY_PRINT_ADDR:
printed += color_fprintf(fp, color, " %04x: ", val);
break;
case BINARY_PRINT_NUM_DATA:
printed += color_fprintf(fp, color, " %02x", val);
break;
case BINARY_PRINT_NUM_PAD:
printed += color_fprintf(fp, color, " ");
break;
case BINARY_PRINT_SEP:
printed += color_fprintf(fp, color, " ");
break;
case BINARY_PRINT_CHAR_DATA:
printed += color_fprintf(fp, color, "%c",
perf script: Fix hex dump character output Using grep -C with perf script -D can give erroneous results as grep loses lines due to non-printable characters, for example, below the 0020, 0060 and 0070 lines are missing: $ perf script -D | grep -C10 AUX | head . 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................ . 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................ . 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ . 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................ . 0090: 00 00 00 00 00 00 00 00 ........ 0 0 0x450 [0x98]: PERF_RECORD_AUXTRACE_INFO type: 1 PMU Type 8 Time Shift 31 perf's isprint() is a custom implementation from the kernel, but the kernel's _ctype appears to include characters from Latin-1 Supplement which is not compatible with, for example, UTF-8. Fix by checking also isascii(). After: $ tools/perf/perf script -D | grep -C10 AUX | head . 0010: 08 00 00 00 00 00 00 00 1f 00 00 00 00 00 00 00 ................ . 0020: 03 84 32 2f 00 00 00 00 63 7c 4f d2 fa ff ff ff ..2/....c|O..... . 0030: 01 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 ................ . 0040: 00 08 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0050: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ . 0060: 00 02 00 00 00 00 00 00 00 c0 03 00 00 00 00 00 ................ . 0070: e2 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 ................ . 0080: 02 00 00 00 00 00 00 00 1b 00 00 00 00 00 00 00 ................ . 0090: 00 00 00 00 00 00 00 00 ........ Fixes: 3052ba56bcb58904 ("tools perf: Move from sane_ctype.h obtained from git to the Linux's original") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20220112085057.277205-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-12 11:50:57 +03:00
isprint(ch) && isascii(ch) ? ch : '.');
break;
case BINARY_PRINT_CHAR_PAD:
printed += color_fprintf(fp, color, " ");
break;
case BINARY_PRINT_LINE_END:
printed += color_fprintf(fp, color, "\n");
break;
case BINARY_PRINT_DATA_END:
printed += fprintf(fp, "\n");
break;
default:
break;
}
return printed;
}
void trace_event(union perf_event *event)
{
unsigned char *raw_event = (void *)event;
if (!dump_trace)
return;
print_binary(raw_event, event->header.size, 16,
trace_event_printer, event);
}
static struct sublevel_option debug_opts[] = {
{ .name = "verbose", .value_ptr = &verbose },
{ .name = "ordered-events", .value_ptr = &debug_ordered_events},
{ .name = "stderr", .value_ptr = &redirect_to_stderr},
{ .name = "data-convert", .value_ptr = &debug_data_convert },
{ .name = "perf-event-open", .value_ptr = &debug_peo_args },
{ .name = NULL, }
};
int perf_debug_option(const char *str)
{
int ret;
ret = perf_parse_sublevel_options(str, debug_opts);
if (ret)
return ret;
/* Allow only verbose value in range (0, 10), otherwise set 0. */
verbose = (verbose < 0) || (verbose > 10) ? 0 : verbose;
return 0;
}
int perf_quiet_option(void)
{
struct sublevel_option *opt = &debug_opts[0];
/* disable all debug messages */
while (opt->name) {
*opt->value_ptr = -1;
opt++;
}
return 0;
}
#define DEBUG_WRAPPER(__n, __l) \
static int pr_ ## __n ## _wrapper(const char *fmt, ...) \
{ \
va_list args; \
int ret; \
\
va_start(args, fmt); \
ret = veprintf(__l, verbose, fmt, args); \
va_end(args); \
return ret; \
}
DEBUG_WRAPPER(warning, 0);
DEBUG_WRAPPER(debug, 1);
void perf_debug_setup(void)
{
debug_set_file(stderr);
libapi_set_print(pr_warning_wrapper, pr_warning_wrapper, pr_debug_wrapper);
}
/* Obtain a backtrace and print it to stdout. */
#ifdef HAVE_BACKTRACE_SUPPORT
void dump_stack(void)
{
void *array[16];
size_t size = backtrace(array, ARRAY_SIZE(array));
char **strings = backtrace_symbols(array, size);
size_t i;
printf("Obtained %zd stack frames.\n", size);
for (i = 0; i < size; i++)
printf("%s\n", strings[i]);
free(strings);
}
#else
void dump_stack(void) {}
#endif
void sighandler_dump_stack(int sig)
{
psignal(sig, "perf");
dump_stack();
signal(sig, SIG_DFL);
raise(sig);
}