iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
66a68b0be4
linux/arch/arm/configs/sama5_defconfig

245 lines
5.8 KiB
Plaintext
Raw Normal View History

ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
ARM: configs: at91: make system tickless when idle This makes Atmel sama5 platforms' system tickless when idle. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-05 11:43:42 +03:00
CONFIG_NO_HZ_IDLE=y
ARM: configs: at91: enable HIGH_RES_TIMERS This enables by default the high resolution timers on sama5d2 platforms. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-05 11:43:43 +03:00
CONFIG_HIGH_RES_TIMERS=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_LOG_BUF_SHIFT=14
ARM: at91: sama5: Update defconfig Enable CGROUPS support, so we can boot userspace that uses systemd on top of kernel configured using this defconfig. The systemd userspace depends on cgroups and without them, it dies in mysterious ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-05 23:31:35 +03:00
CONFIG_CGROUPS=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_ARCH_AT91=y
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig Add SAMA5D2 SoC plus Atmel flexcom and Atmel sdhci devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 16:04:48 +03:00
CONFIG_SOC_SAMA5D2=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_SOC_SAMA5D3=y
ARM: at91: add sama5d4 support to sama5_defconfig Add sama5d4 to sama5_defconfig to build kernel booting on both sama5d3 and samad4. Note that earlyprintk can only be working for one or the other. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-15 20:15:58 +04:00
CONFIG_SOC_SAMA5D4=y
ARM: configs: at91: unselect PIT The PIT is not required anymore to successfully boot and may actually harm in case preempt-rt is used because the PIT interrupt is shared. Disable it so the TCB clocksource is used. Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-10-09 22:48:14 +03:00
# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_UACCESS_WITH_MEMCPY=y
ARM: configs: at91: DT/ATAG defconfig modifications As all AT91 platforms are converted to DT for a long time, adapt the defconfigs by: - removing legacy CONFIG_ATAGS as a DT will always be provided; - removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the vast majority of systems will use a DT-aware bootloader on these devices. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-02-05 14:15:09 +03:00
# CONFIG_ATAGS is not set
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_KEXEC=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_VFP=y
ARM: at91: sama5: update defconfig Add neon support for sama5d4 and large blocks/files support. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-10-22 16:59:18 +04:00
CONFIG_NEON=y
CONFIG_KERNEL_MODE_NEON=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_INET_DIAG is not set
CONFIG_IPV6_SIT_6RD=y
ARM: configs: at91: sama5: enable bridge and VLAN filtering These modules are needed to configure bridges in Linux, to take full advantage of the KSZ switch capabilities. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
2020-07-23 19:24:33 +03:00
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
ARM: configs: at91: sama5: add support for KSZ ethernet switches Enable DSA and KSZ9477 support as modules. Ethernet switches are used by the SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
2020-07-23 19:24:32 +03:00
CONFIG_NET_DSA=m
ARM: configs: at91: sama5: enable bridge and VLAN filtering These modules are needed to configure bridges in Linux, to take full advantage of the KSZ switch capabilities. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
2020-07-23 19:24:33 +03:00
CONFIG_VLAN_8021Q=m
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_CAN=y
CONFIG_CAN_AT91=y
ARM: configs: at91: add MCAN driver to sama5_defconfig Add the Controller Area Network (MCAN) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15 13:12:46 +03:00
CONFIG_CAN_M_CAN=y
ARM: configs: at91: sama5: enable CAN PLATFORM driver CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms after the driver was split into multiple files. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
2020-07-23 19:24:34 +03:00
CONFIG_CAN_M_CAN_PLATFORM=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_MAC80211_LEDS=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
ARM: configs: at91: Add mtd tests as modules Add MTD tests as they are used in CI and for validation plan. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-28 19:02:54 +03:00
CONFIG_MTD_TESTS=m
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 18:47:44 +03:00
CONFIG_MTD_RAW_NAND=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_MTD_NAND_ATMEL=y
ARM: at91: add MTD_SPI_NOR (new dependency for M25P80) This defconfig contains the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-01 10:26:41 +04:00
CONFIG_MTD_SPI_NOR=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_MTD_UBI=y
ARM: configs: at91: Modernize UBI defconfig part UBI_GLUEBI is not so common and UBI_FASTMAP is used for several years. Make them part of a modernization of UBI defconfig options. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-26 21:37:04 +03:00
CONFIG_MTD_UBI_FASTMAP=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
ARM: configs: at91: sama5: add support for KSZ ethernet switches Enable DSA and KSZ9477 support as modules. Ethernet switches are used by the SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
2020-07-23 19:24:32 +03:00
CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_NET_VENDOR_BROADCOM is not set
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_MACB=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MICREL_PHY=y
ARM: configs: at91: sama5: Enable LAN78XX as module Include this driver as the USB-Ethernet chip is present on SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: update commit subject and message] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2019-05-02 10:52:53 +03:00
CONFIG_USB_LAN78XX=m
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_RT2X00=m
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_RTL8187=m
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
ARM: configs: at91: add generic resistive touchscreen to sama5 Add generic resistive touchscreen CONFIG_TOUCHSCREEN_ADC to sama5_defconfig Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 17:17:43 +03:00
CONFIG_TOUCHSCREEN_ADC=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
ARM: configs: sama5_defconfig: add QSPI driver Add Quad SPI driver to the sama5 defconfig. This driver is needed for sama5d2 SoC. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2021-02-08 11:19:31 +03:00
CONFIG_SPI_ATMEL_QUADSPI=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
ARM: configs: at91: sama5: PIOBU as built-in Include as built-in as it's used by multiple boards. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-26 19:03:24 +03:00
CONFIG_GPIO_SAMA5D2_PIOBU=y
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_POWER_RESET=y
ARM: at91: sama5: update defconfig Update defconfig, adding: - PWM support using the generic framework - generic PWM leds - Power/reset and removing deprecated config options. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02 12:50:03 +04:00
CONFIG_POWER_SUPPLY=y
ARM: at91/defconfig: Add ACT8945A driver Include ACT8945A mfd, regulator and power drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-24 10:25:25 +03:00
CONFIG_BATTERY_ACT8945A=y
ARM: sama5_defconfig: add support for the Axentia TSE-850 board The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 16:18:34 +03:00
CONFIG_SENSORS_JC42=m
ARM: at91/defconfig: enable watchdog drivers in sama5_defconfig Enable AT91SAM9X and SAMA5D4 watchdog drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-11-05 10:37:56 +03:00
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_SAMA5D4_WATCHDOG=y
ARM: at91/defconfig: Add ACT8945A driver Include ACT8945A mfd, regulator and power drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-24 10:25:25 +03:00
CONFIG_MFD_ACT8945A=y
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig Add SAMA5D2 SoC plus Atmel flexcom and Atmel sdhci devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 16:04:48 +03:00
CONFIG_MFD_ATMEL_FLEXCOM=y
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 17:20:07 +03:00
CONFIG_MFD_ATMEL_HLCDC=y
ARM: at91/defconfig: sama5_defconfig: updated due to enabling -- CONFIG_REGULATOR -- CONFIG_REGULATOR_ACT8865 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [nicolas.ferre@atmel.com: move added entries to proper location within file] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 16:45:21 +04:00
CONFIG_REGULATOR=y
ARM: at91/defconfig: add CONFIG_REGULATOR_FIXED_VOLTAGE for mmc driver As an update of the sd/mmc DT definition needs the fixed voltage regulator, add it to the at91 defconfigs. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-05-19 11:00:57 +03:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: at91/defconfig: sama5_defconfig: updated due to enabling -- CONFIG_REGULATOR -- CONFIG_REGULATOR_ACT8865 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> [nicolas.ferre@atmel.com: move added entries to proper location within file] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 16:45:21 +04:00
CONFIG_REGULATOR_ACT8865=y
ARM: at91/defconfig: Add ACT8945A driver Include ACT8945A mfd, regulator and power drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-24 10:25:25 +03:00
CONFIG_REGULATOR_ACT8945A=y
ARM: configs: at91: sama5: MCP16502 regulator as built-in This regulator is needed by several SoC or external peripherals on different boards, providing required power rails. Make it built-in to match usual use-cases. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-26 18:39:29 +03:00
CONFIG_REGULATOR_MCP16502=y
ARM: sama5_defconfig: add support for the Axentia TSE-850 board The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 16:18:34 +03:00
CONFIG_REGULATOR_PWM=m
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-14 05:41:55 +03:00
CONFIG_MEDIA_SUPPORT=y
ARM: configs: at91: sama5: resync with media changes The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
2020-10-16 10:51:09 +03:00
CONFIG_MEDIA_SUPPORT_FILTER=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-14 05:41:55 +03:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: configs: at91: sama5: resync with media changes The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
2020-10-16 10:51:09 +03:00
CONFIG_MEDIA_PLATFORM_SUPPORT=y
ARM: configs: at91: Add USB Video webcam class USB webcams are used during validation process, add them as modules. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-03-09 16:07:39 +03:00
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-14 05:41:55 +03:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: configs: at91: sama5: resync with media changes The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
2020-10-16 10:51:09 +03:00
CONFIG_VIDEO_ATMEL_ISC=y
ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-14 05:41:55 +03:00
CONFIG_VIDEO_ATMEL_ISI=y
ARM: configs: at91: sama5: resync with media changes The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
2020-10-16 10:51:09 +03:00
CONFIG_VIDEO_OV2640=m
CONFIG_VIDEO_OV5640=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_OV7740=m
CONFIG_VIDEO_MT9V032=m
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 17:20:07 +03:00
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_LCD_CLASS_DEVICE=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 17:20:07 +03:00
CONFIG_BACKLIGHT_PWM=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: at91/sama5_defconfig: enable sound support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-06 13:37:06 +04:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_ATMEL_SOC_WM8904=y
ARM: configs: at91: sama5: Enable CLASSD CLASSD is present on SAMA5d2 SoCs. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200618154147.687878-1-codrin.ciubotariu@microchip.com
2020-06-18 18:41:47 +03:00
CONFIG_SND_ATMEL_SOC_CLASSD=y
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 18:36:31 +03:00
CONFIG_SND_ATMEL_SOC_PDMIC=y
ARM: sama5_defconfig: add support for the Axentia TSE-850 board The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 16:18:34 +03:00
CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m
ARM: configs: at91: Add I2S driver to sama5 Add I2S CONFIG_SND_ATMEL_SOC_I2S to sama5_defconfig. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-29 19:47:54 +03:00
CONFIG_SND_ATMEL_SOC_I2S=y
ARM: configs: at91: sama5: Add audio MIKROE PROTO board Add this board as a module as it's useful for testing audio on multiple AT91 boards. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-26 19:32:39 +03:00
CONFIG_SND_SOC_MIKROE_PROTO=m
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
# CONFIG_HID_GENERIC is not set
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_STORAGE=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_PL2303=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_USB_GADGET=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_USB_ATMEL_USBA=y
CONFIG_USB_G_SERIAL=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_MMC=y
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig Add SAMA5D2 SoC plus Atmel flexcom and Atmel sdhci devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-16 16:04:48 +03:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_AT91=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
ARM: at91: sama5: update defconfig Update defconfig, adding: - PWM support using the generic framework - generic PWM leds - Power/reset and removing deprecated config options. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02 12:50:03 +04:00
CONFIG_LEDS_PWM=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
ARM: at91/defconfig: add the HDMA controller to sama5_defconfig Selection of the HDMAC option is now needed to allow some sama5 devices to have the DMA driver compiled and available. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 16:44:30 +03:00
CONFIG_AT_HDMAC=y
ARM: at91/defconfig: add the XDMA driver Add the Atmel eXtended DMA Controller driver option. This driver is first used on SAMA5D4 SoCs and only relevant in sama5_defconfig file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-01 14:24:08 +03:00
CONFIG_AT_XDMAC=y
ARM: configs: at91: sama5: enable the Hantro G1 engine The SoC features a Hantro G1 compatible engine. Enable it by default, so people can make use of it. Keep it a module, as suggested by Nicolas Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-11-emil.l.velikov@gmail.com
2021-03-11 18:40:55 +03:00
CONFIG_STAGING=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_HANTRO=m
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-14 18:38:17 +03:00
CONFIG_AT91_SAMA5D2_ADC=y
ARM: sama5_defconfig: add support for the Axentia TSE-850 board The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 16:18:34 +03:00
CONFIG_ENVELOPE_DETECTOR=m
CONFIG_DPOT_DAC=m
CONFIG_MCP4531=m
ARM: at91: sama5: update defconfig Update defconfig, adding: - PWM support using the generic framework - generic PWM leds - Power/reset and removing deprecated config options. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02 12:50:03 +04:00
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-26 17:20:07 +03:00
CONFIG_PWM_ATMEL_HLCDC_PWM=y
ARM: at91/defconfig: add TCB PWM driver selection This is the selection of the new PWM driver using TC Blocks. This driver is useful so we enable it in both sama5 and at91_dt defconfig files. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-01 14:27:16 +03:00
CONFIG_PWM_ATMEL_TCB=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_EXT4_FS=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
ARM: at91: udpate defconfigs Merge 9g20 with 9260 and 9g10 with 9261 as those SoCs can run from the same kernel even in non DT world. Fix the sam9261ek to allow 9g10 and sam9261 to compile together. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-15 19:19:21 +04:00
CONFIG_NLS_UTF8=y
ARM: configs: at91: sama5: update with savedefconfig While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-03-11 18:40:54 +03:00
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_DEV_ATMEL_AES=y
CONFIG_CRYPTO_DEV_ATMEL_TDES=y
CONFIG_CRYPTO_DEV_ATMEL_SHA=y
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_MEMORY_INIT=y
ARM: at91: sama5: update defconfig Update defconfig, adding: - PWM support using the generic framework - generic PWM leds - Power/reset and removing deprecated config options. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-02 12:50:03 +04:00
# CONFIG_SCHED_DEBUG is not set
ARM: at91: add defconfig for SAMA5 Defconfig file for SAMA5 devices. It covers the SAMA5D3 family. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-03-22 17:24:14 +04:00
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
Reference in New Issue Copy Permalink