License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
2005-04-17 02:20:36 +04:00
/*
* arch / x86_64 / lib / csum - partial . c
*
* This file contains network checksum routines that are better done
* in an architecture - specific manner due to speed .
*/
2023-05-11 04:10:02 +03:00
2005-04-17 02:20:36 +04:00
# include <linux/compiler.h>
2016-07-14 03:18:57 +03:00
# include <linux/export.h>
2005-04-17 02:20:36 +04:00
# include <asm/checksum.h>
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
# include <asm/word-at-a-time.h>
2005-04-17 02:20:36 +04:00
2023-09-24 17:35:49 +03:00
static inline __wsum csum_finalize_sum ( u64 temp64 )
2005-04-17 02:20:36 +04:00
{
2023-09-24 17:35:49 +03:00
return ( __force __wsum ) ( ( temp64 + ror64 ( temp64 , 32 ) ) > > 32 ) ;
2023-05-11 04:10:02 +03:00
}
2023-06-27 23:55:32 +03:00
static inline unsigned long update_csum_40b ( unsigned long sum , const unsigned long m [ 5 ] )
{
asm ( " addq %1,%0 \n \t "
" adcq %2,%0 \n \t "
" adcq %3,%0 \n \t "
" adcq %4,%0 \n \t "
" adcq %5,%0 \n \t "
" adcq $0,%0 "
: " +r " ( sum )
: " m " ( m [ 0 ] ) , " m " ( m [ 1 ] ) , " m " ( m [ 2 ] ) ,
" m " ( m [ 3 ] ) , " m " ( m [ 4 ] ) ) ;
return sum ;
}
2005-04-17 02:20:36 +04:00
/*
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
* Do a checksum on an arbitrary memory area .
2005-04-17 02:20:36 +04:00
* Returns a 32 bit checksum .
*
* This isn ' t as time critical as it used to be because many NICs
* do hardware checksumming these days .
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
*
* Still , with CHECKSUM_COMPLETE this is called to compute
* checksums on IPv6 headers ( 40 bytes ) and other small parts .
* it ' s best to have buff aligned on a 64 - bit boundary
2005-04-17 02:20:36 +04:00
*/
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
__wsum csum_partial ( const void * buff , int len , __wsum sum )
2005-04-17 02:20:36 +04:00
{
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
u64 temp64 = ( __force u64 ) sum ;
2005-04-17 02:20:36 +04:00
2023-06-27 23:55:32 +03:00
/* Do two 40-byte chunks in parallel to get better ILP */
if ( likely ( len > = 80 ) ) {
u64 temp64_2 = 0 ;
do {
temp64 = update_csum_40b ( temp64 , buff ) ;
temp64_2 = update_csum_40b ( temp64_2 , buff + 40 ) ;
buff + = 80 ;
len - = 80 ;
} while ( len > = 80 ) ;
asm ( " addq %1,%0 \n \t "
" adcq $0,%0 "
: " +r " ( temp64 ) : " r " ( temp64_2 ) ) ;
2023-05-11 04:10:02 +03:00
}
2023-06-27 23:55:32 +03:00
/*
* len = = 40 is the hot case due to IPv6 headers , so return
* early for that exact case without checking the tail bytes .
*/
if ( len > = 40 ) {
temp64 = update_csum_40b ( temp64 , buff ) ;
len - = 40 ;
if ( ! len )
return csum_finalize_sum ( temp64 ) ;
buff + = 40 ;
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
}
if ( len & 32 ) {
asm ( " addq 0*8(%[src]),%[res] \n \t "
" adcq 1*8(%[src]),%[res] \n \t "
" adcq 2*8(%[src]),%[res] \n \t "
" adcq 3*8(%[src]),%[res] \n \t "
" adcq $0,%[res] "
2023-05-11 04:10:02 +03:00
: [ res ] " +r " ( temp64 )
: [ src ] " r " ( buff ) , " m " ( * ( const char ( * ) [ 32 ] ) buff ) ) ;
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
buff + = 32 ;
}
if ( len & 16 ) {
asm ( " addq 0*8(%[src]),%[res] \n \t "
" adcq 1*8(%[src]),%[res] \n \t "
" adcq $0,%[res] "
2023-05-11 04:10:02 +03:00
: [ res ] " +r " ( temp64 )
: [ src ] " r " ( buff ) , " m " ( * ( const char ( * ) [ 16 ] ) buff ) ) ;
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
buff + = 16 ;
}
if ( len & 8 ) {
asm ( " addq 0*8(%[src]),%[res] \n \t "
" adcq $0,%[res] "
2023-05-11 04:10:02 +03:00
: [ res ] " +r " ( temp64 )
: [ src ] " r " ( buff ) , " m " ( * ( const char ( * ) [ 8 ] ) buff ) ) ;
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
buff + = 8 ;
}
if ( len & 7 ) {
2023-05-11 04:10:02 +03:00
unsigned int shift = ( - len < < 3 ) & 63 ;
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
unsigned long trail ;
2005-04-17 02:20:36 +04:00
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
trail = ( load_unaligned_zeropad ( buff ) < < shift ) > > shift ;
2005-04-17 02:20:36 +04:00
x86/csum: Rewrite/optimize csum_partial()
With more NICs supporting CHECKSUM_COMPLETE, and IPv6 being widely
used csum_partial() is heavily used with small amount of bytes, and is
consuming many cycles.
IPv6 header size, for instance, is 40 bytes.
Another thing to consider is that NET_IP_ALIGN is 0 on x86, meaning
that network headers are not word-aligned, unless the driver forces
this.
This means that csum_partial() fetches one u16 to 'align the buffer',
then performs three u64 additions with carry in a loop, then a
remaining u32, then a remaining u16.
With this new version, it performs a loop only for the 64 bytes blocks,
then the remaining is bisected.
Testing on various CPUs, all of them show a big reduction in
csum_partial() cost (by 50 to 80 %)
Before:
4.16% [kernel] [k] csum_partial
After:
0.83% [kernel] [k] csum_partial
If run in a loop 1,000,000 times:
Before:
26,922,913 cycles # 3846130.429 GHz
80,302,961 instructions # 2.98 insn per cycle
21,059,816 branches # 3008545142.857 M/sec
2,896 branch-misses # 0.01% of all branches
After:
17,960,709 cycles # 3592141.800 GHz
41,292,805 instructions # 2.30 insn per cycle
11,058,119 branches # 2211623800.000 M/sec
2,997 branch-misses # 0.03% of all branches
[ bp: Massage, merge in subsequent fixes into a single patch:
- um compilation error due to missing load_unaligned_zeropad():
- Reported-by: kernel test robot <lkp@intel.com>
- Link: https://lkml.kernel.org/r/20211118175239.1525650-1-eric.dumazet@gmail.com
- Fix initial seed for odd buffers
- Reported-by: Noah Goldstein <goldstein.w.n@gmail.com>
- Link: https://lkml.kernel.org/r/20211125141817.3541501-1-eric.dumazet@gmail.com
]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20211112161950.528886-1-eric.dumazet@gmail.com
2021-11-12 19:19:50 +03:00
asm ( " addq %[trail],%[res] \n \t "
" adcq $0,%[res] "
2023-05-11 04:10:02 +03:00
: [ res ] " +r " ( temp64 )
: [ trail ] " r " ( trail ) ) ;
2005-04-17 02:20:36 +04:00
}
2023-09-24 17:35:49 +03:00
return csum_finalize_sum ( temp64 ) ;
2005-04-17 02:20:36 +04:00
}
2016-01-11 19:04:34 +03:00
EXPORT_SYMBOL ( csum_partial ) ;
2005-04-17 02:20:36 +04:00
/*
* this routine is used for miscellaneous IP - like checksums , mainly
* in icmp . c
*/
2006-11-15 08:20:08 +03:00
__sum16 ip_compute_csum ( const void * buff , int len )
2005-04-17 02:20:36 +04:00
{
2023-05-11 04:10:02 +03:00
return csum_fold ( csum_partial ( buff , len , 0 ) ) ;
2005-04-17 02:20:36 +04:00
}
2006-06-26 15:59:44 +04:00
EXPORT_SYMBOL ( ip_compute_csum ) ;