2019-05-20 10:19:02 +03:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
2005-04-17 02:20:36 +04:00
/* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */
/*
* Copyright ( C ) 1995 - 1997 Jan " Yenya " Kasprzak < kas @ fi . muni . cz >
*/
# ifndef COSA_H__
# define COSA_H__
# include <linux/ioctl.h>
# ifdef __KERNEL__
/* status register - output bits */
# define SR_RX_DMA_ENA 0x04 /* receiver DMA enable bit */
# define SR_TX_DMA_ENA 0x08 /* transmitter DMA enable bit */
# define SR_RST 0x10 /* SRP reset */
# define SR_USR_INT_ENA 0x20 /* user interrupt enable bit */
# define SR_TX_INT_ENA 0x40 /* transmitter interrupt enable bit */
# define SR_RX_INT_ENA 0x80 /* receiver interrupt enable bit */
/* status register - input bits */
# define SR_USR_RQ 0x20 /* user interrupt request pending */
# define SR_TX_RDY 0x40 /* transmitter empty (ready) */
# define SR_RX_RDY 0x80 /* receiver data ready */
# define SR_UP_REQUEST 0x02 / * request from SRP to transfer data
up to PC */
# define SR_DOWN_REQUEST 0x01 / * SRP is able to transfer data down
from PC to SRP */
# define SR_END_OF_TRANSFER 0x03 / * SRP signalize end of
transfer ( up or down ) */
# define SR_CMD_FROM_SRP_MASK 0x03 /* mask to get SRP command */
/* bits in driver status byte definitions : */
# define SR_RDY_RCV 0x01 /* ready to receive packet */
# define SR_RDY_SND 0x02 /* ready to send packet */
# define SR_CMD_PND 0x04 /* command pending */ /* not currently used */
/* ???? */
# define SR_PKT_UP 0x01 /* transfer of packet up in progress */
# define SR_PKT_DOWN 0x02 /* transfer of packet down in progress */
# endif /* __KERNEL__ */
# define SR_LOAD_ADDR 0x4400 /* SRP microcode load address */
# define SR_START_ADDR 0x4400 /* SRP microcode start address */
# define COSA_LOAD_ADDR 0x400 /* SRP microcode load address */
# define COSA_MAX_FIRMWARE_SIZE 0x10000
/* ioctls */
struct cosa_download {
int addr , len ;
char __user * code ;
} ;
/* Reset the device */
# define COSAIORSET _IO('C',0xf0)
/* Start microcode at given address */
# define COSAIOSTRT _IOW('C',0xf1, int)
/* Read the block from the device memory */
# define COSAIORMEM _IOWR('C',0xf2, struct cosa_download *)
/* actually the struct cosa_download itself; this is to keep
* the ioctl number same as in 2.4 in order to keep the user - space
* utils compatible . */
/* Write the block to the device memory (i.e. download the microcode) */
# define COSAIODOWNLD _IOW('C',0xf2, struct cosa_download *)
/* actually the struct cosa_download itself; this is to keep
* the ioctl number same as in 2.4 in order to keep the user - space
* utils compatible . */
/* Read the device type (one of "srp", "cosa", and "cosa8" for now) */
# define COSAIORTYPE _IOR('C',0xf3, char *)
/* Read the device identification string */
# define COSAIORIDSTR _IOR('C',0xf4, char *)
/* Maximum length of the identification string. */
# define COSA_MAX_ID_STRING 128
/* Increment/decrement the module usage count :-) */
/* #define COSAIOMINC _IO('C',0xf5) */
/* #define COSAIOMDEC _IO('C',0xf6) */
/* Get the total number of cards installed */
# define COSAIONRCARDS _IO('C',0xf7)
/* Get the number of channels on this card */
# define COSAIONRCHANS _IO('C',0xf8)
/* Set the driver for the bus-master operations */
# define COSAIOBMSET _IOW('C', 0xf9, unsigned short)
# define COSA_BM_OFF 0 /* Bus-mastering off - use ISA DMA (default) */
# define COSA_BM_ON 1 /* Bus-mastering on - faster but untested */
/* Gets the busmaster status */
# define COSAIOBMGET _IO('C', 0xfa)
# endif /* !COSA_H__ */
