iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
6c38e25b6b
linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h

185 lines
4.3 KiB
C
Raw Normal View History

[ARM] tegra: pinmux: add safe values, move tegra2, add suspend - the reset values for some pin groups in the tegra pin mux can result in functional errors due to conflicting with actively-configured pin groups muxing from the same controller. this change adds a known safe, non- conflicting mux for every pin group, which can be used on platforms where the pin group is not routed to any peripheral - also add each pin group's I/O voltage rail, to enable platform code to map from the pin groups used by each interface to the regulators used for dynamic voltage control - add routines to individually configure the tristate, pin mux and pull- ups for a pingroup_config array, so that it is possible to program individual values at run-time without modifying other values. this allows driver power-management code to reprogram individual interfaces into lower power states during idle / suspend, or to reprogram the pin mux to support multiple physical busses per internal controller (e.g., sharing a single I2C or SPI controller across multiple pin groups) - move chip-specific data like pingroups and drive-pingroups out of the common code and into chip-specific code - fix debug output for group with no pullups - add a TEGRA_MUX_SAFE function. Setting a pingroup to TEGRA_MUX_SAFE will automatically select a mux setting that is guaranteed not to conflict with any of the hardware blocks. Signed-off-by: Gary King <gking@nvidia.com>
2010-07-10 02:13:52 +04:00
/*
arm/tegra: rename tegra20 pinmux files Rename pinmux-t2.h and pinmux-t2-tables.c to the new tegra naming. This file will be reworked somewhat in the next patch to support multiple tegra SoC types. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 19:03:21 +04:00
* linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
[ARM] tegra: pinmux: add safe values, move tegra2, add suspend - the reset values for some pin groups in the tegra pin mux can result in functional errors due to conflicting with actively-configured pin groups muxing from the same controller. this change adds a known safe, non- conflicting mux for every pin group, which can be used on platforms where the pin group is not routed to any peripheral - also add each pin group's I/O voltage rail, to enable platform code to map from the pin groups used by each interface to the regulators used for dynamic voltage control - add routines to individually configure the tristate, pin mux and pull- ups for a pingroup_config array, so that it is possible to program individual values at run-time without modifying other values. this allows driver power-management code to reprogram individual interfaces into lower power states during idle / suspend, or to reprogram the pin mux to support multiple physical busses per internal controller (e.g., sharing a single I2C or SPI controller across multiple pin groups) - move chip-specific data like pingroups and drive-pingroups out of the common code and into chip-specific code - fix debug output for group with no pullups - add a TEGRA_MUX_SAFE function. Setting a pingroup to TEGRA_MUX_SAFE will automatically select a mux setting that is guaranteed not to conflict with any of the hardware blocks. Signed-off-by: Gary King <gking@nvidia.com>
2010-07-10 02:13:52 +04:00
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
arm/tegra: rename tegra20 pinmux files Rename pinmux-t2.h and pinmux-t2-tables.c to the new tegra naming. This file will be reworked somewhat in the next patch to support multiple tegra SoC types. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 19:03:21 +04:00
#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H
#define __MACH_TEGRA_PINMUX_TEGRA20_H
[ARM] tegra: pinmux: add safe values, move tegra2, add suspend - the reset values for some pin groups in the tegra pin mux can result in functional errors due to conflicting with actively-configured pin groups muxing from the same controller. this change adds a known safe, non- conflicting mux for every pin group, which can be used on platforms where the pin group is not routed to any peripheral - also add each pin group's I/O voltage rail, to enable platform code to map from the pin groups used by each interface to the regulators used for dynamic voltage control - add routines to individually configure the tristate, pin mux and pull- ups for a pingroup_config array, so that it is possible to program individual values at run-time without modifying other values. this allows driver power-management code to reprogram individual interfaces into lower power states during idle / suspend, or to reprogram the pin mux to support multiple physical busses per internal controller (e.g., sharing a single I2C or SPI controller across multiple pin groups) - move chip-specific data like pingroups and drive-pingroups out of the common code and into chip-specific code - fix debug output for group with no pullups - add a TEGRA_MUX_SAFE function. Setting a pingroup to TEGRA_MUX_SAFE will automatically select a mux setting that is guaranteed not to conflict with any of the hardware blocks. Signed-off-by: Gary King <gking@nvidia.com>
2010-07-10 02:13:52 +04:00
enum tegra_pingroup {
TEGRA_PINGROUP_ATA = 0,
TEGRA_PINGROUP_ATB,
TEGRA_PINGROUP_ATC,
TEGRA_PINGROUP_ATD,
TEGRA_PINGROUP_ATE,
TEGRA_PINGROUP_CDEV1,
TEGRA_PINGROUP_CDEV2,
TEGRA_PINGROUP_CRTP,
TEGRA_PINGROUP_CSUS,
TEGRA_PINGROUP_DAP1,
TEGRA_PINGROUP_DAP2,
TEGRA_PINGROUP_DAP3,
TEGRA_PINGROUP_DAP4,
TEGRA_PINGROUP_DDC,
TEGRA_PINGROUP_DTA,
TEGRA_PINGROUP_DTB,
TEGRA_PINGROUP_DTC,
TEGRA_PINGROUP_DTD,
TEGRA_PINGROUP_DTE,
TEGRA_PINGROUP_DTF,
TEGRA_PINGROUP_GMA,
TEGRA_PINGROUP_GMB,
TEGRA_PINGROUP_GMC,
TEGRA_PINGROUP_GMD,
TEGRA_PINGROUP_GME,
TEGRA_PINGROUP_GPU,
TEGRA_PINGROUP_GPU7,
TEGRA_PINGROUP_GPV,
TEGRA_PINGROUP_HDINT,
TEGRA_PINGROUP_I2CP,
TEGRA_PINGROUP_IRRX,
TEGRA_PINGROUP_IRTX,
TEGRA_PINGROUP_KBCA,
TEGRA_PINGROUP_KBCB,
TEGRA_PINGROUP_KBCC,
TEGRA_PINGROUP_KBCD,
TEGRA_PINGROUP_KBCE,
TEGRA_PINGROUP_KBCF,
TEGRA_PINGROUP_LCSN,
TEGRA_PINGROUP_LD0,
TEGRA_PINGROUP_LD1,
TEGRA_PINGROUP_LD10,
TEGRA_PINGROUP_LD11,
TEGRA_PINGROUP_LD12,
TEGRA_PINGROUP_LD13,
TEGRA_PINGROUP_LD14,
TEGRA_PINGROUP_LD15,
TEGRA_PINGROUP_LD16,
TEGRA_PINGROUP_LD17,
TEGRA_PINGROUP_LD2,
TEGRA_PINGROUP_LD3,
TEGRA_PINGROUP_LD4,
TEGRA_PINGROUP_LD5,
TEGRA_PINGROUP_LD6,
TEGRA_PINGROUP_LD7,
TEGRA_PINGROUP_LD8,
TEGRA_PINGROUP_LD9,
TEGRA_PINGROUP_LDC,
TEGRA_PINGROUP_LDI,
TEGRA_PINGROUP_LHP0,
TEGRA_PINGROUP_LHP1,
TEGRA_PINGROUP_LHP2,
TEGRA_PINGROUP_LHS,
TEGRA_PINGROUP_LM0,
TEGRA_PINGROUP_LM1,
TEGRA_PINGROUP_LPP,
TEGRA_PINGROUP_LPW0,
TEGRA_PINGROUP_LPW1,
TEGRA_PINGROUP_LPW2,
TEGRA_PINGROUP_LSC0,
TEGRA_PINGROUP_LSC1,
TEGRA_PINGROUP_LSCK,
TEGRA_PINGROUP_LSDA,
TEGRA_PINGROUP_LSDI,
TEGRA_PINGROUP_LSPI,
TEGRA_PINGROUP_LVP0,
TEGRA_PINGROUP_LVP1,
TEGRA_PINGROUP_LVS,
TEGRA_PINGROUP_OWC,
TEGRA_PINGROUP_PMC,
TEGRA_PINGROUP_PTA,
TEGRA_PINGROUP_RM,
TEGRA_PINGROUP_SDB,
TEGRA_PINGROUP_SDC,
TEGRA_PINGROUP_SDD,
TEGRA_PINGROUP_SDIO1,
TEGRA_PINGROUP_SLXA,
TEGRA_PINGROUP_SLXC,
TEGRA_PINGROUP_SLXD,
TEGRA_PINGROUP_SLXK,
TEGRA_PINGROUP_SPDI,
TEGRA_PINGROUP_SPDO,
TEGRA_PINGROUP_SPIA,
TEGRA_PINGROUP_SPIB,
TEGRA_PINGROUP_SPIC,
TEGRA_PINGROUP_SPID,
TEGRA_PINGROUP_SPIE,
TEGRA_PINGROUP_SPIF,
TEGRA_PINGROUP_SPIG,
TEGRA_PINGROUP_SPIH,
TEGRA_PINGROUP_UAA,
TEGRA_PINGROUP_UAB,
TEGRA_PINGROUP_UAC,
TEGRA_PINGROUP_UAD,
TEGRA_PINGROUP_UCA,
TEGRA_PINGROUP_UCB,
TEGRA_PINGROUP_UDA,
/* these pin groups only have pullup and pull down control */
TEGRA_PINGROUP_CK32,
TEGRA_PINGROUP_DDRC,
TEGRA_PINGROUP_PMCA,
TEGRA_PINGROUP_PMCB,
TEGRA_PINGROUP_PMCC,
TEGRA_PINGROUP_PMCD,
TEGRA_PINGROUP_PMCE,
TEGRA_PINGROUP_XM2C,
TEGRA_PINGROUP_XM2D,
TEGRA_MAX_PINGROUP,
};
enum tegra_drive_pingroup {
TEGRA_DRIVE_PINGROUP_AO1 = 0,
TEGRA_DRIVE_PINGROUP_AO2,
TEGRA_DRIVE_PINGROUP_AT1,
TEGRA_DRIVE_PINGROUP_AT2,
TEGRA_DRIVE_PINGROUP_CDEV1,
TEGRA_DRIVE_PINGROUP_CDEV2,
TEGRA_DRIVE_PINGROUP_CSUS,
TEGRA_DRIVE_PINGROUP_DAP1,
TEGRA_DRIVE_PINGROUP_DAP2,
TEGRA_DRIVE_PINGROUP_DAP3,
TEGRA_DRIVE_PINGROUP_DAP4,
TEGRA_DRIVE_PINGROUP_DBG,
TEGRA_DRIVE_PINGROUP_LCD1,
TEGRA_DRIVE_PINGROUP_LCD2,
TEGRA_DRIVE_PINGROUP_SDMMC2,
TEGRA_DRIVE_PINGROUP_SDMMC3,
TEGRA_DRIVE_PINGROUP_SPI,
TEGRA_DRIVE_PINGROUP_UAA,
TEGRA_DRIVE_PINGROUP_UAB,
TEGRA_DRIVE_PINGROUP_UART2,
TEGRA_DRIVE_PINGROUP_UART3,
TEGRA_DRIVE_PINGROUP_VI1,
TEGRA_DRIVE_PINGROUP_VI2,
TEGRA_DRIVE_PINGROUP_XM2A,
TEGRA_DRIVE_PINGROUP_XM2C,
TEGRA_DRIVE_PINGROUP_XM2D,
TEGRA_DRIVE_PINGROUP_XM2CLK,
TEGRA_DRIVE_PINGROUP_MEMCOMP,
ARM: tegra: pinmux: Add missing drive pingroups and fix suspend Adds missing drive pingroups, saves all drive pingroups in suspend, and restores the pinmux registers in the proper order. Signed-off-by: Gary King <gking@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com>
2010-08-18 11:19:58 +04:00
TEGRA_DRIVE_PINGROUP_SDIO1,
TEGRA_DRIVE_PINGROUP_CRT,
TEGRA_DRIVE_PINGROUP_DDC,
TEGRA_DRIVE_PINGROUP_GMA,
TEGRA_DRIVE_PINGROUP_GMB,
TEGRA_DRIVE_PINGROUP_GMC,
TEGRA_DRIVE_PINGROUP_GMD,
TEGRA_DRIVE_PINGROUP_GME,
TEGRA_DRIVE_PINGROUP_OWR,
TEGRA_DRIVE_PINGROUP_UAD,
[ARM] tegra: pinmux: add safe values, move tegra2, add suspend - the reset values for some pin groups in the tegra pin mux can result in functional errors due to conflicting with actively-configured pin groups muxing from the same controller. this change adds a known safe, non- conflicting mux for every pin group, which can be used on platforms where the pin group is not routed to any peripheral - also add each pin group's I/O voltage rail, to enable platform code to map from the pin groups used by each interface to the regulators used for dynamic voltage control - add routines to individually configure the tristate, pin mux and pull- ups for a pingroup_config array, so that it is possible to program individual values at run-time without modifying other values. this allows driver power-management code to reprogram individual interfaces into lower power states during idle / suspend, or to reprogram the pin mux to support multiple physical busses per internal controller (e.g., sharing a single I2C or SPI controller across multiple pin groups) - move chip-specific data like pingroups and drive-pingroups out of the common code and into chip-specific code - fix debug output for group with no pullups - add a TEGRA_MUX_SAFE function. Setting a pingroup to TEGRA_MUX_SAFE will automatically select a mux setting that is guaranteed not to conflict with any of the hardware blocks. Signed-off-by: Gary King <gking@nvidia.com>
2010-07-10 02:13:52 +04:00
TEGRA_MAX_DRIVE_PINGROUP,
};
#endif
Reference in New Issue Copy Permalink