linux/lib/swiotlb.c

995 lines
27 KiB
C
Raw Normal View History

/*
* Dynamic DMA mapping support.
*
* This implementation is a fallback for platforms that do not support
* I/O TLBs (aka DMA address translation hardware).
* Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
* Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
* Copyright (C) 2000, 2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 03/05/07 davidm Switch from PCI-DMA to generic device DMA API.
* 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid
* unnecessary i-cache flushing.
* 04/07/.. ak Better overflow handling. Assorted fixes.
* 05/09/10 linville Add support for syncing ranges, support syncing for
* DMA_BIDIRECTIONAL mappings, miscellaneous cleanup.
* 08/12/11 beckyb Add highmem support
*/
#include <linux/cache.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/swiotlb.h>
#include <linux/pfn.h>
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/highmem.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/scatterlist.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/iommu-helper.h>
#define CREATE_TRACE_POINTS
#include <trace/events/swiotlb.h>
#define OFFSET(val,align) ((unsigned long) \
( (val) & ( (align) - 1)))
#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
/*
* Minimum IO TLB size to bother booting with. Systems with mainly
* 64bit capable cards will only lightly use the swiotlb. If we can't
* allocate a contiguous 1MB, we're probably in trouble anyway.
*/
#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
int swiotlb_force;
/*
* Used to do a quick range check in swiotlb_tbl_unmap_single and
* swiotlb_tbl_sync_single_*, to see if the memory was in fact allocated by this
* API.
*/
static phys_addr_t io_tlb_start, io_tlb_end;
/*
* The number of IO TLB blocks (in groups of 64) between io_tlb_start and
* io_tlb_end. This is command line adjustable via setup_io_tlb_npages.
*/
static unsigned long io_tlb_nslabs;
/*
* When the IOMMU overflows we return a fallback buffer. This sets the size.
*/
static unsigned long io_tlb_overflow = 32*1024;
static phys_addr_t io_tlb_overflow_buffer;
/*
* This is a free list describing the number of free entries available from
* each index
*/
static unsigned int *io_tlb_list;
static unsigned int io_tlb_index;
/*
* We need to save away the original address corresponding to a mapped entry
* for the sync operations.
*/
#define INVALID_PHYS_ADDR (~(phys_addr_t)0)
static phys_addr_t *io_tlb_orig_addr;
/*
* Protect the above data structures in the map and unmap calls
*/
static DEFINE_SPINLOCK(io_tlb_lock);
static int late_alloc;
static int __init
setup_io_tlb_npages(char *str)
{
if (isdigit(*str)) {
io_tlb_nslabs = simple_strtoul(str, &str, 0);
/* avoid tail segment of size < IO_TLB_SEGSIZE */
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
if (*str == ',')
++str;
if (!strcmp(str, "force"))
swiotlb_force = 1;
return 0;
}
early_param("swiotlb", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
unsigned long swiotlb_nr_tbl(void)
{
return io_tlb_nslabs;
}
EXPORT_SYMBOL_GPL(swiotlb_nr_tbl);
/* default to 64MB */
#define IO_TLB_DEFAULT_SIZE (64UL<<20)
unsigned long swiotlb_size_or_default(void)
{
unsigned long size;
size = io_tlb_nslabs << IO_TLB_SHIFT;
return size ? size : (IO_TLB_DEFAULT_SIZE);
}
/* Note that this doesn't work with highmem page */
static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
volatile void *address)
{
return phys_to_dma(hwdev, virt_to_phys(address));
}
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
static bool no_iotlb_memory;
void swiotlb_print_info(void)
{
unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT;
unsigned char *vstart, *vend;
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
if (no_iotlb_memory) {
pr_warn("software IO TLB: No low mem\n");
return;
}
vstart = phys_to_virt(io_tlb_start);
vend = phys_to_virt(io_tlb_end);
printk(KERN_INFO "software IO TLB [mem %#010llx-%#010llx] (%luMB) mapped at [%p-%p]\n",
(unsigned long long)io_tlb_start,
(unsigned long long)io_tlb_end,
bytes >> 20, vstart, vend - 1);
}
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
{
void *v_overflow_buffer;
unsigned long i, bytes;
bytes = nslabs << IO_TLB_SHIFT;
io_tlb_nslabs = nslabs;
io_tlb_start = __pa(tlb);
io_tlb_end = io_tlb_start + bytes;
/*
* Get the overflow emergency buffer
*/
v_overflow_buffer = memblock_virt_alloc_low_nopanic(
PAGE_ALIGN(io_tlb_overflow),
PAGE_SIZE);
if (!v_overflow_buffer)
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
return -ENOMEM;
io_tlb_overflow_buffer = __pa(v_overflow_buffer);
/*
* Allocate and initialize the free list array. This array is used
* to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
* between io_tlb_start and io_tlb_end.
*/
io_tlb_list = memblock_virt_alloc(
PAGE_ALIGN(io_tlb_nslabs * sizeof(int)),
PAGE_SIZE);
io_tlb_orig_addr = memblock_virt_alloc(
PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)),
PAGE_SIZE);
for (i = 0; i < io_tlb_nslabs; i++) {
io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
}
io_tlb_index = 0;
if (verbose)
swiotlb_print_info();
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
return 0;
}
/*
* Statically reserve bounce buffer space and initialize bounce buffer data
* structures for the software IO TLB used to implement the DMA API.
*/
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
void __init
swiotlb_init(int verbose)
{
size_t default_size = IO_TLB_DEFAULT_SIZE;
unsigned char *vstart;
unsigned long bytes;
if (!io_tlb_nslabs) {
io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
bytes = io_tlb_nslabs << IO_TLB_SHIFT;
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
/* Get IO TLB memory from the low pages */
vstart = memblock_virt_alloc_low_nopanic(PAGE_ALIGN(bytes), PAGE_SIZE);
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
return;
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
if (io_tlb_start)
memblock_free_early(io_tlb_start,
PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
pr_warn("Cannot allocate SWIOTLB buffer");
no_iotlb_memory = true;
}
/*
* Systems with larger DMA zones (those that don't support ISA) can
* initialize the swiotlb later using the slab allocator if needed.
* This should be just like above, but with some error catching.
*/
int
swiotlb_late_init_with_default_size(size_t default_size)
{
unsigned long bytes, req_nslabs = io_tlb_nslabs;
unsigned char *vstart = NULL;
unsigned int order;
int rc = 0;
if (!io_tlb_nslabs) {
io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
/*
* Get IO TLB memory from the low pages
*/
order = get_order(io_tlb_nslabs << IO_TLB_SHIFT);
io_tlb_nslabs = SLABS_PER_PAGE << order;
bytes = io_tlb_nslabs << IO_TLB_SHIFT;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
vstart = (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
order);
if (vstart)
break;
order--;
}
if (!vstart) {
io_tlb_nslabs = req_nslabs;
return -ENOMEM;
}
if (order != get_order(bytes)) {
printk(KERN_WARNING "Warning: only able to allocate %ld MB "
"for software IO TLB\n", (PAGE_SIZE << order) >> 20);
io_tlb_nslabs = SLABS_PER_PAGE << order;
}
rc = swiotlb_late_init_with_tbl(vstart, io_tlb_nslabs);
if (rc)
free_pages((unsigned long)vstart, order);
return rc;
}
int
swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs)
{
unsigned long i, bytes;
unsigned char *v_overflow_buffer;
bytes = nslabs << IO_TLB_SHIFT;
io_tlb_nslabs = nslabs;
io_tlb_start = virt_to_phys(tlb);
io_tlb_end = io_tlb_start + bytes;
memset(tlb, 0, bytes);
/*
* Get the overflow emergency buffer
*/
v_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
get_order(io_tlb_overflow));
if (!v_overflow_buffer)
goto cleanup2;
io_tlb_overflow_buffer = virt_to_phys(v_overflow_buffer);
/*
* Allocate and initialize the free list array. This array is used
* to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
* between io_tlb_start and io_tlb_end.
*/
io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
get_order(io_tlb_nslabs * sizeof(int)));
if (!io_tlb_list)
goto cleanup3;
io_tlb_orig_addr = (phys_addr_t *)
__get_free_pages(GFP_KERNEL,
get_order(io_tlb_nslabs *
sizeof(phys_addr_t)));
if (!io_tlb_orig_addr)
goto cleanup4;
for (i = 0; i < io_tlb_nslabs; i++) {
io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
}
io_tlb_index = 0;
swiotlb_print_info();
late_alloc = 1;
return 0;
cleanup4:
free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
sizeof(int)));
io_tlb_list = NULL;
cleanup3:
free_pages((unsigned long)v_overflow_buffer,
get_order(io_tlb_overflow));
io_tlb_overflow_buffer = 0;
cleanup2:
io_tlb_end = 0;
io_tlb_start = 0;
io_tlb_nslabs = 0;
return -ENOMEM;
}
void __init swiotlb_free(void)
{
if (!io_tlb_orig_addr)
return;
if (late_alloc) {
free_pages((unsigned long)phys_to_virt(io_tlb_overflow_buffer),
get_order(io_tlb_overflow));
free_pages((unsigned long)io_tlb_orig_addr,
get_order(io_tlb_nslabs * sizeof(phys_addr_t)));
free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
sizeof(int)));
free_pages((unsigned long)phys_to_virt(io_tlb_start),
get_order(io_tlb_nslabs << IO_TLB_SHIFT));
} else {
memblock_free_late(io_tlb_overflow_buffer,
PAGE_ALIGN(io_tlb_overflow));
memblock_free_late(__pa(io_tlb_orig_addr),
PAGE_ALIGN(io_tlb_nslabs * sizeof(phys_addr_t)));
memblock_free_late(__pa(io_tlb_list),
PAGE_ALIGN(io_tlb_nslabs * sizeof(int)));
memblock_free_late(io_tlb_start,
PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
}
io_tlb_nslabs = 0;
}
x86: enable DMA CMA with swiotlb The DMA Contiguous Memory Allocator support on x86 is disabled when swiotlb config option is enabled. So DMA CMA is always disabled on x86_64 because swiotlb is always enabled. This attempts to support for DMA CMA with enabling swiotlb config option. The contiguous memory allocator on x86 is integrated in the function dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for dma_alloc_coherent(). x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops tries to allocate with dma_generic_alloc_coherent() firstly and then swiotlb_alloc_coherent() is called as a fallback. The main part of supporting DMA CMA with swiotlb is that changing x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for dma_free_coherent() so that it can distinguish memory allocated by dma_generic_alloc_coherent() from one allocated by swiotlb_alloc_coherent() and release it with dma_generic_free_coherent() which can handle contiguous memory. This change requires making is_swiotlb_buffer() global function. This also needs to change .free callback in the dma_map_ops for amd_gart and sta2x11, because these dma_ops are also using dma_generic_alloc_coherent(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 03:06:50 +04:00
int is_swiotlb_buffer(phys_addr_t paddr)
{
return paddr >= io_tlb_start && paddr < io_tlb_end;
}
/*
* Bounce: copy the swiotlb buffer back to the original dma location
*/
static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir)
{
unsigned long pfn = PFN_DOWN(orig_addr);
unsigned char *vaddr = phys_to_virt(tlb_addr);
if (PageHighMem(pfn_to_page(pfn))) {
/* The buffer does not have a mapping. Map it in and copy */
unsigned int offset = orig_addr & ~PAGE_MASK;
char *buffer;
unsigned int sz = 0;
unsigned long flags;
while (size) {
sz = min_t(size_t, PAGE_SIZE - offset, size);
local_irq_save(flags);
buffer = kmap_atomic(pfn_to_page(pfn));
if (dir == DMA_TO_DEVICE)
memcpy(vaddr, buffer + offset, sz);
else
memcpy(buffer + offset, vaddr, sz);
kunmap_atomic(buffer);
local_irq_restore(flags);
size -= sz;
pfn++;
vaddr += sz;
offset = 0;
}
} else if (dir == DMA_TO_DEVICE) {
memcpy(vaddr, phys_to_virt(orig_addr), size);
} else {
memcpy(phys_to_virt(orig_addr), vaddr, size);
}
}
phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
dma_addr_t tbl_dma_addr,
phys_addr_t orig_addr, size_t size,
enum dma_data_direction dir)
{
unsigned long flags;
phys_addr_t tlb_addr;
unsigned int nslots, stride, index, wrap;
int i;
unsigned long mask;
unsigned long offset_slots;
unsigned long max_slots;
x86: Don't panic if can not alloc buffer for swiotlb Normal boot path on system with iommu support: swiotlb buffer will be allocated early at first and then try to initialize iommu, if iommu for intel or AMD could setup properly, swiotlb buffer will be freed. The early allocating is with bootmem, and could panic when we try to use kdump with buffer above 4G only, or with memmap to limit mem under 4G. for example: memmap=4095M$1M to remove memory under 4G. According to Eric, add _nopanic version and no_iotlb_memory to fail map single later if swiotlb is still needed. -v2: don't pass nopanic, and use -ENOMEM return value according to Eric. panic early instead of using swiotlb_full to panic...according to Eric/Konrad. -v3: make swiotlb_init to be notpanic, but will affect: arm64, ia64, powerpc, tile, unicore32, x86. -v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: linux-mips@linux-mips.org Cc: xen-devel@lists.xensource.com Cc: virtualization@lists.linux-foundation.org Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 00:20:16 +04:00
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
mask = dma_get_seg_boundary(hwdev);
swiotlb: add swiotlb_tbl_map_single library function swiotlb_tbl_map_single() takes the dma address of iotlb instead of using swiotlb_virt_to_bus(). [v2: changed swiotlb_tlb to swiotlb_tbl] [v3: changed u64 to dma_addr_t] This patch: This is a set of patches that separate the address translation (virt_to_phys, virt_to_bus, etc) and allocation of the SWIOTLB buffer from the SWIOTLB library. The idea behind this set of patches is to make it possible to have separate mechanisms for translating virtual to physical or virtual to DMA addresses on platforms which need an SWIOTLB, and where physical != PCI bus address and also to allocate the core IOTLB memory outside SWIOTLB. One customers of this is the pv-ops project, which can switch between different modes of operation depending on the environment it is running in: bare-metal or virtualized (Xen for now). Another is the Wii DMA - used to implement the MEM2 DMA facility needed by its EHCI controller (for details: http://lkml.org/lkml/2010/5/18/303) On bare-metal SWIOTLB is used when there are no hardware IOMMU. In virtualized environment it used when PCI pass-through is enabled for the guest. The problems with PCI pass-through is that the guest's idea of PFN's is not the real thing. To fix that, there is translation layer for PFN->machine frame number and vice-versa. To bubble that up to the SWIOTLB layer there are two possible solutions. One solution has been to wholesale copy the SWIOTLB, stick it in arch/x86/xen/swiotlb.c and modify the virt_to_phys, phys_to_virt and others to use the Xen address translation functions. Unfortunately, since the kernel can run on bare-metal, there would be big code overlap with the real SWIOTLB. (git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git xen/dom0/swiotlb-new) Another approach, which this set of patches explores, is to abstract the address translation and address determination functions away from the SWIOTLB book-keeping functions. This way the core SWIOTLB library functions are present in one place, while the address related functions are in a separate library that can be loaded when running under non-bare-metal platform. Changelog: Since the last posting [v8.2] Konrad has done: - Added this changelog in the patch and referenced in the other patches this description. - 'enum dma_data_direction direction' to 'enum dma.. dir' so to be unified. [v8-v8.2 changes:] - Rolled-up the last two patches in one. - Rebased against linus latest. That meant dealing with swiotlb_sync_single_range_* changes. - added Acked-by: Fujita Tomonori and Tested-by: Albert Herranz [v7-v8 changes:] - Minimized the list of exported functions. - Integrated Fujita's patches and changed "swiotlb_tlb" to "swiotlb_tbl" in them. [v6-v7 changes:] - Minimized the amount of exported functions/variable with a prefix of: "swiotbl_tbl". - Made the usage of 'int dir' to be 'enum dma_data_direction'. [v5-v6 changes:] - Made the exported functions/variables have the 'swiotlb_bk' prefix. - dropped the checkpatches/other reworks Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Albert Herranz <albert_herranz@yahoo.es>
2010-05-10 23:14:54 +04:00
tbl_dma_addr &= mask;
offset_slots = ALIGN(tbl_dma_addr, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
/*
* Carefully handle integer overflow which can occur when mask == ~0UL.
*/
max_slots = mask + 1
? ALIGN(mask + 1, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT
: 1UL << (BITS_PER_LONG - IO_TLB_SHIFT);
/*
* For mappings greater than a page, we limit the stride (and
* hence alignment) to a page size.
*/
nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
if (size > PAGE_SIZE)
stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
else
stride = 1;
BUG_ON(!nslots);
/*
* Find suitable number of IO TLB entries size that will fit this
* request and allocate a buffer from that IO TLB pool.
*/
spin_lock_irqsave(&io_tlb_lock, flags);
index = ALIGN(io_tlb_index, stride);
if (index >= io_tlb_nslabs)
index = 0;
wrap = index;
do {
while (iommu_is_span_boundary(index, nslots, offset_slots,
max_slots)) {
index += stride;
if (index >= io_tlb_nslabs)
index = 0;
if (index == wrap)
goto not_found;
}
/*
* If we find a slot that indicates we have 'nslots' number of
* contiguous buffers, we allocate the buffers from that slot
* and mark the entries as '0' indicating unavailable.
*/
if (io_tlb_list[index] >= nslots) {
int count = 0;
for (i = index; i < (int) (index + nslots); i++)
io_tlb_list[i] = 0;
for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE - 1) && io_tlb_list[i]; i--)
io_tlb_list[i] = ++count;
tlb_addr = io_tlb_start + (index << IO_TLB_SHIFT);
/*
* Update the indices to avoid searching in the next
* round.
*/
io_tlb_index = ((index + nslots) < io_tlb_nslabs
? (index + nslots) : 0);
goto found;
}
index += stride;
if (index >= io_tlb_nslabs)
index = 0;
} while (index != wrap);
not_found:
spin_unlock_irqrestore(&io_tlb_lock, flags);
if (printk_ratelimit())
dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes)\n", size);
return SWIOTLB_MAP_ERROR;
found:
spin_unlock_irqrestore(&io_tlb_lock, flags);
/*
* Save away the mapping from the original address to the DMA address.
* This is needed when we sync the memory. Then we sync the buffer if
* needed.
*/
for (i = 0; i < nslots; i++)
io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT);
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
swiotlb_bounce(orig_addr, tlb_addr, size, DMA_TO_DEVICE);
return tlb_addr;
}
EXPORT_SYMBOL_GPL(swiotlb_tbl_map_single);
swiotlb: add swiotlb_tbl_map_single library function swiotlb_tbl_map_single() takes the dma address of iotlb instead of using swiotlb_virt_to_bus(). [v2: changed swiotlb_tlb to swiotlb_tbl] [v3: changed u64 to dma_addr_t] This patch: This is a set of patches that separate the address translation (virt_to_phys, virt_to_bus, etc) and allocation of the SWIOTLB buffer from the SWIOTLB library. The idea behind this set of patches is to make it possible to have separate mechanisms for translating virtual to physical or virtual to DMA addresses on platforms which need an SWIOTLB, and where physical != PCI bus address and also to allocate the core IOTLB memory outside SWIOTLB. One customers of this is the pv-ops project, which can switch between different modes of operation depending on the environment it is running in: bare-metal or virtualized (Xen for now). Another is the Wii DMA - used to implement the MEM2 DMA facility needed by its EHCI controller (for details: http://lkml.org/lkml/2010/5/18/303) On bare-metal SWIOTLB is used when there are no hardware IOMMU. In virtualized environment it used when PCI pass-through is enabled for the guest. The problems with PCI pass-through is that the guest's idea of PFN's is not the real thing. To fix that, there is translation layer for PFN->machine frame number and vice-versa. To bubble that up to the SWIOTLB layer there are two possible solutions. One solution has been to wholesale copy the SWIOTLB, stick it in arch/x86/xen/swiotlb.c and modify the virt_to_phys, phys_to_virt and others to use the Xen address translation functions. Unfortunately, since the kernel can run on bare-metal, there would be big code overlap with the real SWIOTLB. (git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git xen/dom0/swiotlb-new) Another approach, which this set of patches explores, is to abstract the address translation and address determination functions away from the SWIOTLB book-keeping functions. This way the core SWIOTLB library functions are present in one place, while the address related functions are in a separate library that can be loaded when running under non-bare-metal platform. Changelog: Since the last posting [v8.2] Konrad has done: - Added this changelog in the patch and referenced in the other patches this description. - 'enum dma_data_direction direction' to 'enum dma.. dir' so to be unified. [v8-v8.2 changes:] - Rolled-up the last two patches in one. - Rebased against linus latest. That meant dealing with swiotlb_sync_single_range_* changes. - added Acked-by: Fujita Tomonori and Tested-by: Albert Herranz [v7-v8 changes:] - Minimized the list of exported functions. - Integrated Fujita's patches and changed "swiotlb_tlb" to "swiotlb_tbl" in them. [v6-v7 changes:] - Minimized the amount of exported functions/variable with a prefix of: "swiotbl_tbl". - Made the usage of 'int dir' to be 'enum dma_data_direction'. [v5-v6 changes:] - Made the exported functions/variables have the 'swiotlb_bk' prefix. - dropped the checkpatches/other reworks Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Albert Herranz <albert_herranz@yahoo.es>
2010-05-10 23:14:54 +04:00
/*
* Allocates bounce buffer and returns its kernel virtual address.
*/
phys_addr_t map_single(struct device *hwdev, phys_addr_t phys, size_t size,
enum dma_data_direction dir)
swiotlb: add swiotlb_tbl_map_single library function swiotlb_tbl_map_single() takes the dma address of iotlb instead of using swiotlb_virt_to_bus(). [v2: changed swiotlb_tlb to swiotlb_tbl] [v3: changed u64 to dma_addr_t] This patch: This is a set of patches that separate the address translation (virt_to_phys, virt_to_bus, etc) and allocation of the SWIOTLB buffer from the SWIOTLB library. The idea behind this set of patches is to make it possible to have separate mechanisms for translating virtual to physical or virtual to DMA addresses on platforms which need an SWIOTLB, and where physical != PCI bus address and also to allocate the core IOTLB memory outside SWIOTLB. One customers of this is the pv-ops project, which can switch between different modes of operation depending on the environment it is running in: bare-metal or virtualized (Xen for now). Another is the Wii DMA - used to implement the MEM2 DMA facility needed by its EHCI controller (for details: http://lkml.org/lkml/2010/5/18/303) On bare-metal SWIOTLB is used when there are no hardware IOMMU. In virtualized environment it used when PCI pass-through is enabled for the guest. The problems with PCI pass-through is that the guest's idea of PFN's is not the real thing. To fix that, there is translation layer for PFN->machine frame number and vice-versa. To bubble that up to the SWIOTLB layer there are two possible solutions. One solution has been to wholesale copy the SWIOTLB, stick it in arch/x86/xen/swiotlb.c and modify the virt_to_phys, phys_to_virt and others to use the Xen address translation functions. Unfortunately, since the kernel can run on bare-metal, there would be big code overlap with the real SWIOTLB. (git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git xen/dom0/swiotlb-new) Another approach, which this set of patches explores, is to abstract the address translation and address determination functions away from the SWIOTLB book-keeping functions. This way the core SWIOTLB library functions are present in one place, while the address related functions are in a separate library that can be loaded when running under non-bare-metal platform. Changelog: Since the last posting [v8.2] Konrad has done: - Added this changelog in the patch and referenced in the other patches this description. - 'enum dma_data_direction direction' to 'enum dma.. dir' so to be unified. [v8-v8.2 changes:] - Rolled-up the last two patches in one. - Rebased against linus latest. That meant dealing with swiotlb_sync_single_range_* changes. - added Acked-by: Fujita Tomonori and Tested-by: Albert Herranz [v7-v8 changes:] - Minimized the list of exported functions. - Integrated Fujita's patches and changed "swiotlb_tlb" to "swiotlb_tbl" in them. [v6-v7 changes:] - Minimized the amount of exported functions/variable with a prefix of: "swiotbl_tbl". - Made the usage of 'int dir' to be 'enum dma_data_direction'. [v5-v6 changes:] - Made the exported functions/variables have the 'swiotlb_bk' prefix. - dropped the checkpatches/other reworks Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Albert Herranz <albert_herranz@yahoo.es>
2010-05-10 23:14:54 +04:00
{
dma_addr_t start_dma_addr = phys_to_dma(hwdev, io_tlb_start);
swiotlb: add swiotlb_tbl_map_single library function swiotlb_tbl_map_single() takes the dma address of iotlb instead of using swiotlb_virt_to_bus(). [v2: changed swiotlb_tlb to swiotlb_tbl] [v3: changed u64 to dma_addr_t] This patch: This is a set of patches that separate the address translation (virt_to_phys, virt_to_bus, etc) and allocation of the SWIOTLB buffer from the SWIOTLB library. The idea behind this set of patches is to make it possible to have separate mechanisms for translating virtual to physical or virtual to DMA addresses on platforms which need an SWIOTLB, and where physical != PCI bus address and also to allocate the core IOTLB memory outside SWIOTLB. One customers of this is the pv-ops project, which can switch between different modes of operation depending on the environment it is running in: bare-metal or virtualized (Xen for now). Another is the Wii DMA - used to implement the MEM2 DMA facility needed by its EHCI controller (for details: http://lkml.org/lkml/2010/5/18/303) On bare-metal SWIOTLB is used when there are no hardware IOMMU. In virtualized environment it used when PCI pass-through is enabled for the guest. The problems with PCI pass-through is that the guest's idea of PFN's is not the real thing. To fix that, there is translation layer for PFN->machine frame number and vice-versa. To bubble that up to the SWIOTLB layer there are two possible solutions. One solution has been to wholesale copy the SWIOTLB, stick it in arch/x86/xen/swiotlb.c and modify the virt_to_phys, phys_to_virt and others to use the Xen address translation functions. Unfortunately, since the kernel can run on bare-metal, there would be big code overlap with the real SWIOTLB. (git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git xen/dom0/swiotlb-new) Another approach, which this set of patches explores, is to abstract the address translation and address determination functions away from the SWIOTLB book-keeping functions. This way the core SWIOTLB library functions are present in one place, while the address related functions are in a separate library that can be loaded when running under non-bare-metal platform. Changelog: Since the last posting [v8.2] Konrad has done: - Added this changelog in the patch and referenced in the other patches this description. - 'enum dma_data_direction direction' to 'enum dma.. dir' so to be unified. [v8-v8.2 changes:] - Rolled-up the last two patches in one. - Rebased against linus latest. That meant dealing with swiotlb_sync_single_range_* changes. - added Acked-by: Fujita Tomonori and Tested-by: Albert Herranz [v7-v8 changes:] - Minimized the list of exported functions. - Integrated Fujita's patches and changed "swiotlb_tlb" to "swiotlb_tbl" in them. [v6-v7 changes:] - Minimized the amount of exported functions/variable with a prefix of: "swiotbl_tbl". - Made the usage of 'int dir' to be 'enum dma_data_direction'. [v5-v6 changes:] - Made the exported functions/variables have the 'swiotlb_bk' prefix. - dropped the checkpatches/other reworks Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Albert Herranz <albert_herranz@yahoo.es>
2010-05-10 23:14:54 +04:00
return swiotlb_tbl_map_single(hwdev, start_dma_addr, phys, size, dir);
}
/*
* dma_addr is the kernel virtual address of the bounce buffer to unmap.
*/
void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir)
{
unsigned long flags;
int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
phys_addr_t orig_addr = io_tlb_orig_addr[index];
/*
* First, sync the memory before unmapping the entry
*/
if (orig_addr != INVALID_PHYS_ADDR &&
((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
swiotlb_bounce(orig_addr, tlb_addr, size, DMA_FROM_DEVICE);
/*
* Return the buffer to the free list by setting the corresponding
* entries to indicate the number of contiguous entries available.
* While returning the entries to the free list, we merge the entries
* with slots below and above the pool being returned.
*/
spin_lock_irqsave(&io_tlb_lock, flags);
{
count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
io_tlb_list[index + nslots] : 0);
/*
* Step 1: return the slots to the free list, merging the
* slots with superceeding slots
*/
for (i = index + nslots - 1; i >= index; i--) {
io_tlb_list[i] = ++count;
io_tlb_orig_addr[i] = INVALID_PHYS_ADDR;
}
/*
* Step 2: merge the returned slots with the preceding slots,
* if available (non zero)
*/
for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
io_tlb_list[i] = ++count;
}
spin_unlock_irqrestore(&io_tlb_lock, flags);
}
EXPORT_SYMBOL_GPL(swiotlb_tbl_unmap_single);
void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir,
enum dma_sync_target target)
{
int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
phys_addr_t orig_addr = io_tlb_orig_addr[index];
if (orig_addr == INVALID_PHYS_ADDR)
return;
orig_addr += (unsigned long)tlb_addr & ((1 << IO_TLB_SHIFT) - 1);
switch (target) {
case SYNC_FOR_CPU:
if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
swiotlb_bounce(orig_addr, tlb_addr,
size, DMA_FROM_DEVICE);
else
BUG_ON(dir != DMA_TO_DEVICE);
break;
case SYNC_FOR_DEVICE:
if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
swiotlb_bounce(orig_addr, tlb_addr,
size, DMA_TO_DEVICE);
else
BUG_ON(dir != DMA_FROM_DEVICE);
break;
default:
BUG();
}
}
EXPORT_SYMBOL_GPL(swiotlb_tbl_sync_single);
void *
swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags)
{
dma_addr_t dev_addr;
void *ret;
int order = get_order(size);
u64 dma_mask = DMA_BIT_MASK(32);
if (hwdev && hwdev->coherent_dma_mask)
dma_mask = hwdev->coherent_dma_mask;
ret = (void *)__get_free_pages(flags, order);
if (ret) {
dev_addr = swiotlb_virt_to_bus(hwdev, ret);
if (dev_addr + size - 1 > dma_mask) {
/*
* The allocated memory isn't reachable by the device.
*/
free_pages((unsigned long) ret, order);
ret = NULL;
}
}
if (!ret) {
/*
* We are either out of memory or the device can't DMA to
* GFP_DMA memory; fall back on map_single(), which
* will grab memory from the lowest available address range.
*/
phys_addr_t paddr = map_single(hwdev, 0, size, DMA_FROM_DEVICE);
if (paddr == SWIOTLB_MAP_ERROR)
return NULL;
ret = phys_to_virt(paddr);
dev_addr = phys_to_dma(hwdev, paddr);
/* Confirm address can be DMA'd by device */
if (dev_addr + size - 1 > dma_mask) {
printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
(unsigned long long)dma_mask,
(unsigned long long)dev_addr);
/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
swiotlb_tbl_unmap_single(hwdev, paddr,
size, DMA_TO_DEVICE);
return NULL;
}
}
*dma_handle = dev_addr;
memset(ret, 0, size);
return ret;
}
EXPORT_SYMBOL(swiotlb_alloc_coherent);
void
swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
dma_addr_t dev_addr)
{
phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
WARN_ON(irqs_disabled());
if (!is_swiotlb_buffer(paddr))
free_pages((unsigned long)vaddr, get_order(size));
else
/* DMA_TO_DEVICE to avoid memcpy in swiotlb_tbl_unmap_single */
swiotlb_tbl_unmap_single(hwdev, paddr, size, DMA_TO_DEVICE);
}
EXPORT_SYMBOL(swiotlb_free_coherent);
static void
swiotlb_full(struct device *dev, size_t size, enum dma_data_direction dir,
int do_panic)
{
/*
* Ran out of IOMMU space for this operation. This is very bad.
* Unfortunately the drivers cannot handle this operation properly.
* unless they check for dma_mapping_error (most don't)
* When the mapping is small enough return a static buffer to limit
* the damage, or panic when the transfer is too big.
*/
printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
"device %s\n", size, dev ? dev_name(dev) : "?");
if (size <= io_tlb_overflow || !do_panic)
return;
if (dir == DMA_BIDIRECTIONAL)
panic("DMA: Random memory could be DMA accessed\n");
if (dir == DMA_FROM_DEVICE)
panic("DMA: Random memory could be DMA written\n");
if (dir == DMA_TO_DEVICE)
panic("DMA: Random memory could be DMA read\n");
}
/*
* Map a single buffer of the indicated size for DMA in streaming mode. The
* physical address to use is returned.
*
* Once the device is given the dma address, the device owns this memory until
* either swiotlb_unmap_page or swiotlb_dma_sync_single is performed.
*/
dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
struct dma_attrs *attrs)
{
phys_addr_t map, phys = page_to_phys(page) + offset;
dma_addr_t dev_addr = phys_to_dma(dev, phys);
BUG_ON(dir == DMA_NONE);
/*
* If the address happens to be in the device's DMA window,
* we can safely return the device addr and not worry about bounce
* buffering it.
*/
if (dma_capable(dev, dev_addr, size) && !swiotlb_force)
return dev_addr;
trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
/* Oh well, have to allocate and map a bounce buffer. */
map = map_single(dev, phys, size, dir);
if (map == SWIOTLB_MAP_ERROR) {
swiotlb_full(dev, size, dir, 1);
return phys_to_dma(dev, io_tlb_overflow_buffer);
}
dev_addr = phys_to_dma(dev, map);
/* Ensure that the address returned is DMA'ble */
if (!dma_capable(dev, dev_addr, size)) {
swiotlb_tbl_unmap_single(dev, map, size, dir);
return phys_to_dma(dev, io_tlb_overflow_buffer);
}
return dev_addr;
}
EXPORT_SYMBOL_GPL(swiotlb_map_page);
/*
* Unmap a single streaming mode DMA translation. The dma_addr and size must
* match what was provided for in a previous swiotlb_map_page call. All
* other usages are undefined.
*
* After this call, reads by the cpu to the buffer are guaranteed to see
* whatever the device wrote there.
*/
static void unmap_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir)
{
phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
if (is_swiotlb_buffer(paddr)) {
swiotlb_tbl_unmap_single(hwdev, paddr, size, dir);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
/*
* phys_to_virt doesn't work with hihgmem page but we could
* call dma_mark_clean() with hihgmem page here. However, we
* are fine since dma_mark_clean() is null on POWERPC. We can
* make dma_mark_clean() take a physical address if necessary.
*/
dma_mark_clean(phys_to_virt(paddr), size);
}
void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
unmap_single(hwdev, dev_addr, size, dir);
}
EXPORT_SYMBOL_GPL(swiotlb_unmap_page);
/*
* Make physical memory consistent for a single streaming mode DMA translation
* after a transfer.
*
* If you perform a swiotlb_map_page() but wish to interrogate the buffer
* using the cpu, yet do not wish to teardown the dma mapping, you must
* call this function before doing so. At the next point you give the dma
* address back to the card, you must first perform a
* swiotlb_dma_sync_for_device, and then the device again owns the buffer
*/
static void
swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir,
enum dma_sync_target target)
{
phys_addr_t paddr = dma_to_phys(hwdev, dev_addr);
BUG_ON(dir == DMA_NONE);
if (is_swiotlb_buffer(paddr)) {
swiotlb_tbl_sync_single(hwdev, paddr, size, dir, target);
return;
}
if (dir != DMA_FROM_DEVICE)
return;
dma_mark_clean(phys_to_virt(paddr), size);
}
void
swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir)
{
swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_CPU);
}
EXPORT_SYMBOL(swiotlb_sync_single_for_cpu);
void
swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
size_t size, enum dma_data_direction dir)
{
swiotlb_sync_single(hwdev, dev_addr, size, dir, SYNC_FOR_DEVICE);
}
EXPORT_SYMBOL(swiotlb_sync_single_for_device);
/*
* Map a set of buffers described by scatterlist in streaming mode for DMA.
* This is the scatter-gather version of the above swiotlb_map_page
* interface. Here the scatter gather list elements are each tagged with the
* appropriate dma address and length. They are obtained via
* sg_dma_{address,length}(SG).
*
* NOTE: An implementation may be able to use a smaller number of
* DMA address/length pairs than there are SG table elements.
* (for example via virtual mapping capabilities)
* The routine returns the number of addr/length pairs actually
* used, at most nents.
*
* Device ownership issues as mentioned above for swiotlb_map_page are the
* same here.
*/
int
swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
enum dma_data_direction dir, struct dma_attrs *attrs)
{
struct scatterlist *sg;
int i;
BUG_ON(dir == DMA_NONE);
for_each_sg(sgl, sg, nelems, i) {
phys_addr_t paddr = sg_phys(sg);
dma_addr_t dev_addr = phys_to_dma(hwdev, paddr);
if (swiotlb_force ||
!dma_capable(hwdev, dev_addr, sg->length)) {
phys_addr_t map = map_single(hwdev, sg_phys(sg),
sg->length, dir);
if (map == SWIOTLB_MAP_ERROR) {
/* Don't panic here, we expect map_sg users
to do proper error handling. */
swiotlb_full(hwdev, sg->length, dir, 0);
swiotlb_unmap_sg_attrs(hwdev, sgl, i, dir,
attrs);
sg_dma_len(sgl) = 0;
return 0;
}
sg->dma_address = phys_to_dma(hwdev, map);
} else
sg->dma_address = dev_addr;
sg_dma_len(sg) = sg->length;
}
return nelems;
}
EXPORT_SYMBOL(swiotlb_map_sg_attrs);
int
swiotlb_map_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
enum dma_data_direction dir)
{
return swiotlb_map_sg_attrs(hwdev, sgl, nelems, dir, NULL);
}
EXPORT_SYMBOL(swiotlb_map_sg);
/*
* Unmap a set of streaming mode DMA translations. Again, cpu read rules
* concerning calls here are the same as for swiotlb_unmap_page() above.
*/
void
swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
int nelems, enum dma_data_direction dir, struct dma_attrs *attrs)
{
struct scatterlist *sg;
int i;
BUG_ON(dir == DMA_NONE);
for_each_sg(sgl, sg, nelems, i)
unmap_single(hwdev, sg->dma_address, sg_dma_len(sg), dir);
}
EXPORT_SYMBOL(swiotlb_unmap_sg_attrs);
void
swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sgl, int nelems,
enum dma_data_direction dir)
{
return swiotlb_unmap_sg_attrs(hwdev, sgl, nelems, dir, NULL);
}
EXPORT_SYMBOL(swiotlb_unmap_sg);
/*
* Make physical memory consistent for a set of streaming mode DMA translations
* after a transfer.
*
* The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
* and usage.
*/
static void
swiotlb_sync_sg(struct device *hwdev, struct scatterlist *sgl,
int nelems, enum dma_data_direction dir,
enum dma_sync_target target)
{
struct scatterlist *sg;
int i;
for_each_sg(sgl, sg, nelems, i)
swiotlb_sync_single(hwdev, sg->dma_address,
sg_dma_len(sg), dir, target);
}
void
swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir)
{
swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_CPU);
}
EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
void
swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
int nelems, enum dma_data_direction dir)
{
swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE);
}
EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
int
dma-mapping: add the device argument to dma_mapping_error() Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 06:44:49 +04:00
swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
{
return (dma_addr == phys_to_dma(hwdev, io_tlb_overflow_buffer));
}
EXPORT_SYMBOL(swiotlb_dma_mapping_error);
/*
* Return whether the given device DMA address mask can be supported
* properly. For example, if your device can only drive the low 24-bits
* during bus mastering, then you would pass 0x00ffffff as the mask to
* this function.
*/
int
swiotlb_dma_supported(struct device *hwdev, u64 mask)
{
return phys_to_dma(hwdev, io_tlb_end - 1) <= mask;
}
EXPORT_SYMBOL(swiotlb_dma_supported);