2012-03-20 17:18:00 -04:00
/*
* Copyright 2011 Advanced Micro Devices , Inc .
*
* Permission is hereby granted , free of charge , to any person obtaining a
* copy of this software and associated documentation files ( the " Software " ) ,
* to deal in the Software without restriction , including without limitation
* the rights to use , copy , modify , merge , publish , distribute , sublicense ,
* and / or sell copies of the Software , and to permit persons to whom the
* Software is furnished to do so , subject to the following conditions :
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software .
*
* THE SOFTWARE IS PROVIDED " AS IS " , WITHOUT WARRANTY OF ANY KIND , EXPRESS OR
* IMPLIED , INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY ,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT . IN NO EVENT SHALL
* THE COPYRIGHT HOLDER ( S ) OR AUTHOR ( S ) BE LIABLE FOR ANY CLAIM , DAMAGES OR
* OTHER LIABILITY , WHETHER IN AN ACTION OF CONTRACT , TORT OR OTHERWISE ,
* ARISING FROM , OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE .
*
* Authors : Alex Deucher
*/
# ifndef SI_H
# define SI_H
2012-06-01 18:58:22 -04:00
# define TAHITI_RB_BITMAP_WIDTH_PER_SH 2
# define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003
# define VERDE_GB_ADDR_CONFIG_GOLDEN 0x12010002
2012-07-31 12:42:48 -04:00
# define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02010001
2012-06-01 18:58:22 -04:00
2013-03-21 12:41:46 -04:00
# define SI_MAX_SH_GPRS 256
# define SI_MAX_TEMP_GPRS 16
# define SI_MAX_SH_THREADS 256
# define SI_MAX_SH_STACK_ENTRIES 4096
# define SI_MAX_FRC_EOV_CNT 16384
# define SI_MAX_BACKENDS 8
# define SI_MAX_BACKENDS_MASK 0xFF
# define SI_MAX_BACKENDS_PER_SE_MASK 0x0F
# define SI_MAX_SIMDS 12
# define SI_MAX_SIMDS_MASK 0x0FFF
# define SI_MAX_SIMDS_PER_SE_MASK 0x00FF
# define SI_MAX_PIPES 8
# define SI_MAX_PIPES_MASK 0xFF
# define SI_MAX_PIPES_PER_SIMD_MASK 0x3F
# define SI_MAX_LDS_NUM 0xFFFF
# define SI_MAX_TCC 16
# define SI_MAX_TCC_MASK 0xFFFF
2013-06-25 17:56:16 -04:00
/* SMC IND accessor regs */
# define SMC_IND_INDEX_0 0x200
# define SMC_IND_DATA_0 0x204
# define SMC_IND_ACCESS_CNTL 0x228
# define AUTO_INCREMENT_IND_0 (1 << 0)
# define SMC_MESSAGE_0 0x22c
# define SMC_RESP_0 0x230
2013-03-07 12:56:35 -05:00
/* CG IND registers are accessed via SMC indirect space + SMC_CG_IND_START */
# define SMC_CG_IND_START 0xc0030000
2013-06-25 17:56:16 -04:00
# define SMC_CG_IND_END 0xc0040000
2013-03-07 12:56:35 -05:00
# define CG_CGTT_LOCAL_0 0x400
# define CG_CGTT_LOCAL_1 0x401
2013-06-25 17:56:16 -04:00
/* SMC IND registers */
# define SMC_SYSCON_RESET_CNTL 0x80000000
# define RST_REG (1 << 0)
# define SMC_SYSCON_CLOCK_CNTL_0 0x80000004
# define CK_DISABLE (1 << 0)
# define CKEN (1 << 24)
# define VGA_HDP_CONTROL 0x328
# define VGA_MEMORY_DISABLE (1 << 4)
# define DCCG_DISP_SLOW_SELECT_REG 0x4fc
# define DCCG_DISP1_SLOW_SELECT(x) ((x) << 0)
# define DCCG_DISP1_SLOW_SELECT_MASK (7 << 0)
# define DCCG_DISP1_SLOW_SELECT_SHIFT 0
# define DCCG_DISP2_SLOW_SELECT(x) ((x) << 4)
# define DCCG_DISP2_SLOW_SELECT_MASK (7 << 4)
# define DCCG_DISP2_SLOW_SELECT_SHIFT 4
# define CG_SPLL_FUNC_CNTL 0x600
# define SPLL_RESET (1 << 0)
# define SPLL_SLEEP (1 << 1)
# define SPLL_BYPASS_EN (1 << 3)
# define SPLL_REF_DIV(x) ((x) << 4)
# define SPLL_REF_DIV_MASK (0x3f << 4)
# define SPLL_PDIV_A(x) ((x) << 20)
# define SPLL_PDIV_A_MASK (0x7f << 20)
# define SPLL_PDIV_A_SHIFT 20
# define CG_SPLL_FUNC_CNTL_2 0x604
# define SCLK_MUX_SEL(x) ((x) << 0)
# define SCLK_MUX_SEL_MASK (0x1ff << 0)
2013-11-15 16:35:55 -05:00
# define SPLL_CTLREQ_CHG (1 << 23)
# define SCLK_MUX_UPDATE (1 << 26)
2013-06-25 17:56:16 -04:00
# define CG_SPLL_FUNC_CNTL_3 0x608
# define SPLL_FB_DIV(x) ((x) << 0)
# define SPLL_FB_DIV_MASK (0x3ffffff << 0)
# define SPLL_FB_DIV_SHIFT 0
# define SPLL_DITHEN (1 << 28)
# define CG_SPLL_FUNC_CNTL_4 0x60c
2013-11-15 16:35:55 -05:00
# define SPLL_STATUS 0x614
# define SPLL_CHG_STATUS (1 << 1)
2013-06-25 17:56:16 -04:00
# define SPLL_CNTL_MODE 0x618
2013-11-15 16:35:55 -05:00
# define SPLL_SW_DIR_CONTROL (1 << 0)
2014-05-05 16:40:42 -04:00
# define SPLL_REFCLK_SEL(x) ((x) << 26)
# define SPLL_REFCLK_SEL_MASK (3 << 26)
2013-06-25 17:56:16 -04:00
# define CG_SPLL_SPREAD_SPECTRUM 0x620
# define SSEN (1 << 0)
# define CLK_S(x) ((x) << 4)
# define CLK_S_MASK (0xfff << 4)
# define CLK_S_SHIFT 4
# define CG_SPLL_SPREAD_SPECTRUM_2 0x624
# define CLK_V(x) ((x) << 0)
# define CLK_V_MASK (0x3ffffff << 0)
# define CLK_V_SHIFT 0
# define CG_SPLL_AUTOSCALE_CNTL 0x62c
# define AUTOSCALE_ON_SS_CLEAR (1 << 9)
2013-04-08 12:41:34 +02:00
/* discrete uvd clocks */
# define CG_UPLL_FUNC_CNTL 0x634
# define UPLL_RESET_MASK 0x00000001
# define UPLL_SLEEP_MASK 0x00000002
# define UPLL_BYPASS_EN_MASK 0x00000004
# define UPLL_CTLREQ_MASK 0x00000008
# define UPLL_VCO_MODE_MASK 0x00000600
2013-04-29 10:20:23 +02:00
# define UPLL_REF_DIV_MASK 0x003F0000
2013-04-08 12:41:34 +02:00
# define UPLL_CTLACK_MASK 0x40000000
# define UPLL_CTLACK2_MASK 0x80000000
# define CG_UPLL_FUNC_CNTL_2 0x638
# define UPLL_PDIV_A(x) ((x) << 0)
# define UPLL_PDIV_A_MASK 0x0000007F
# define UPLL_PDIV_B(x) ((x) << 8)
# define UPLL_PDIV_B_MASK 0x00007F00
# define VCLK_SRC_SEL(x) ((x) << 20)
# define VCLK_SRC_SEL_MASK 0x01F00000
# define DCLK_SRC_SEL(x) ((x) << 25)
# define DCLK_SRC_SEL_MASK 0x3E000000
# define CG_UPLL_FUNC_CNTL_3 0x63C
# define UPLL_FB_DIV(x) ((x) << 0)
# define UPLL_FB_DIV_MASK 0x01FFFFFF
# define CG_UPLL_FUNC_CNTL_4 0x644
# define UPLL_SPARE_ISPARE9 0x00020000
# define CG_UPLL_FUNC_CNTL_5 0x648
# define RESET_ANTI_MUX_MASK 0x00000200
# define CG_UPLL_SPREAD_SPECTRUM 0x650
# define SSEN_MASK 0x00000001
2013-02-15 11:56:59 -05:00
# define MPLL_BYPASSCLK_SEL 0x65c
# define MPLL_CLKOUT_SEL(x) ((x) << 8)
# define MPLL_CLKOUT_SEL_MASK 0xFF00
2013-02-14 10:04:02 -05:00
# define CG_CLKPIN_CNTL 0x660
# define XTALIN_DIVIDE (1 << 1)
2013-02-15 11:56:59 -05:00
# define BCLK_AS_XCLK (1 << 2)
2013-02-14 10:04:02 -05:00
# define CG_CLKPIN_CNTL_2 0x664
2013-02-15 11:56:59 -05:00
# define FORCE_BIF_REFCLK_EN (1 << 3)
2013-02-14 10:04:02 -05:00
# define MUX_TCLK_TO_XCLK (1 << 8)
2013-02-15 11:56:59 -05:00
# define THM_CLK_CNTL 0x66c
# define CMON_CLK_SEL(x) ((x) << 0)
# define CMON_CLK_SEL_MASK 0xFF
# define TMON_CLK_SEL(x) ((x) << 8)
# define TMON_CLK_SEL_MASK 0xFF00
# define MISC_CLK_CNTL 0x670
# define DEEP_SLEEP_CLK_SEL(x) ((x) << 0)
# define DEEP_SLEEP_CLK_SEL_MASK 0xFF
# define ZCLK_SEL(x) ((x) << 8)
# define ZCLK_SEL_MASK 0xFF00
2013-06-25 17:56:16 -04:00
# define CG_THERMAL_CTRL 0x700
# define DPM_EVENT_SRC(x) ((x) << 0)
# define DPM_EVENT_SRC_MASK (7 << 0)
# define DIG_THERM_DPM(x) ((x) << 14)
# define DIG_THERM_DPM_MASK 0x003FC000
# define DIG_THERM_DPM_SHIFT 14
2014-09-14 21:14:14 -04:00
# define CG_THERMAL_STATUS 0x704
# define FDO_PWM_DUTY(x) ((x) << 9)
# define FDO_PWM_DUTY_MASK (0xff << 9)
# define FDO_PWM_DUTY_SHIFT 9
2013-06-25 17:56:16 -04:00
# define CG_THERMAL_INT 0x708
# define DIG_THERM_INTH(x) ((x) << 8)
# define DIG_THERM_INTH_MASK 0x0000FF00
# define DIG_THERM_INTH_SHIFT 8
# define DIG_THERM_INTL(x) ((x) << 16)
# define DIG_THERM_INTL_MASK 0x00FF0000
# define DIG_THERM_INTL_SHIFT 16
# define THERM_INT_MASK_HIGH (1 << 24)
# define THERM_INT_MASK_LOW (1 << 25)
2014-09-14 21:14:14 -04:00
# define CG_MULT_THERMAL_CTRL 0x710
# define TEMP_SEL(x) ((x) << 20)
# define TEMP_SEL_MASK (0xff << 20)
# define TEMP_SEL_SHIFT 20
2013-06-25 17:56:16 -04:00
# define CG_MULT_THERMAL_STATUS 0x714
# define ASIC_MAX_TEMP(x) ((x) << 0)
# define ASIC_MAX_TEMP_MASK 0x000001ff
# define ASIC_MAX_TEMP_SHIFT 0
# define CTF_TEMP(x) ((x) << 9)
# define CTF_TEMP_MASK 0x0003fe00
# define CTF_TEMP_SHIFT 9
2014-09-14 21:14:14 -04:00
# define CG_FDO_CTRL0 0x754
# define FDO_STATIC_DUTY(x) ((x) << 0)
2014-11-30 22:03:57 -05:00
# define FDO_STATIC_DUTY_MASK 0x000000FF
2014-09-14 21:14:14 -04:00
# define FDO_STATIC_DUTY_SHIFT 0
# define CG_FDO_CTRL1 0x758
# define FMAX_DUTY100(x) ((x) << 0)
2014-11-30 22:03:57 -05:00
# define FMAX_DUTY100_MASK 0x000000FF
2014-09-14 21:14:14 -04:00
# define FMAX_DUTY100_SHIFT 0
# define CG_FDO_CTRL2 0x75C
# define TMIN(x) ((x) << 0)
2014-11-30 22:03:57 -05:00
# define TMIN_MASK 0x000000FF
2014-09-14 21:14:14 -04:00
# define TMIN_SHIFT 0
# define FDO_PWM_MODE(x) ((x) << 11)
2014-11-30 22:03:57 -05:00
# define FDO_PWM_MODE_MASK (7 << 11)
2014-09-14 21:14:14 -04:00
# define FDO_PWM_MODE_SHIFT 11
# define TACH_PWM_RESP_RATE(x) ((x) << 25)
# define TACH_PWM_RESP_RATE_MASK (0x7f << 25)
# define TACH_PWM_RESP_RATE_SHIFT 25
# define CG_TACH_CTRL 0x770
# define EDGE_PER_REV(x) ((x) << 0)
# define EDGE_PER_REV_MASK (0x7 << 0)
# define EDGE_PER_REV_SHIFT 0
# define TARGET_PERIOD(x) ((x) << 3)
# define TARGET_PERIOD_MASK 0xfffffff8
# define TARGET_PERIOD_SHIFT 3
# define CG_TACH_STATUS 0x774
# define TACH_PERIOD(x) ((x) << 0)
# define TACH_PERIOD_MASK 0xffffffff
# define TACH_PERIOD_SHIFT 0
2013-06-25 17:56:16 -04:00
# define GENERAL_PWRMGT 0x780
# define GLOBAL_PWRMGT_EN (1 << 0)
# define STATIC_PM_EN (1 << 1)
# define THERMAL_PROTECTION_DIS (1 << 2)
# define THERMAL_PROTECTION_TYPE (1 << 3)
# define SW_SMIO_INDEX(x) ((x) << 6)
# define SW_SMIO_INDEX_MASK (1 << 6)
# define SW_SMIO_INDEX_SHIFT 6
# define VOLT_PWRMGT_EN (1 << 10)
# define DYN_SPREAD_SPECTRUM_EN (1 << 23)
# define CG_TPC 0x784
# define SCLK_PWRMGT_CNTL 0x788
# define SCLK_PWRMGT_OFF (1 << 0)
# define SCLK_LOW_D1 (1 << 1)
# define FIR_RESET (1 << 4)
# define FIR_FORCE_TREND_SEL (1 << 5)
# define FIR_TREND_MODE (1 << 6)
# define DYN_GFX_CLK_OFF_EN (1 << 7)
# define GFX_CLK_FORCE_ON (1 << 8)
# define GFX_CLK_REQUEST_OFF (1 << 9)
# define GFX_CLK_FORCE_OFF (1 << 10)
# define GFX_CLK_OFF_ACPI_D1 (1 << 11)
# define GFX_CLK_OFF_ACPI_D2 (1 << 12)
# define GFX_CLK_OFF_ACPI_D3 (1 << 13)
# define DYN_LIGHT_SLEEP_EN (1 << 14)
2013-06-28 18:02:19 -04:00
# define TARGET_AND_CURRENT_PROFILE_INDEX 0x798
# define CURRENT_STATE_INDEX_MASK (0xf << 4)
# define CURRENT_STATE_INDEX_SHIFT 4
2013-06-25 17:56:16 -04:00
# define CG_FTV 0x7bc
# define CG_FFCT_0 0x7c0
# define UTC_0(x) ((x) << 0)
# define UTC_0_MASK (0x3ff << 0)
# define DTC_0(x) ((x) << 10)
# define DTC_0_MASK (0x3ff << 10)
# define CG_BSP 0x7fc
# define BSP(x) ((x) << 0)
# define BSP_MASK (0xffff << 0)
# define BSU(x) ((x) << 16)
# define BSU_MASK (0xf << 16)
# define CG_AT 0x800
# define CG_R(x) ((x) << 0)
# define CG_R_MASK (0xffff << 0)
# define CG_L(x) ((x) << 16)
# define CG_L_MASK (0xffff << 16)
# define CG_GIT 0x804
# define CG_GICST(x) ((x) << 0)
# define CG_GICST_MASK (0xffff << 0)
# define CG_GIPOT(x) ((x) << 16)
# define CG_GIPOT_MASK (0xffff << 16)
# define CG_SSP 0x80c
# define SST(x) ((x) << 0)
# define SST_MASK (0xffff << 0)
# define SSTU(x) ((x) << 16)
# define SSTU_MASK (0xf << 16)
# define CG_DISPLAY_GAP_CNTL 0x828
# define DISP1_GAP(x) ((x) << 0)
# define DISP1_GAP_MASK (3 << 0)
# define DISP2_GAP(x) ((x) << 2)
# define DISP2_GAP_MASK (3 << 2)
# define VBI_TIMER_COUNT(x) ((x) << 4)
# define VBI_TIMER_COUNT_MASK (0x3fff << 4)
# define VBI_TIMER_UNIT(x) ((x) << 20)
# define VBI_TIMER_UNIT_MASK (7 << 20)
# define DISP1_GAP_MCHG(x) ((x) << 24)
# define DISP1_GAP_MCHG_MASK (3 << 24)
# define DISP2_GAP_MCHG(x) ((x) << 26)
# define DISP2_GAP_MCHG_MASK (3 << 26)
# define CG_ULV_CONTROL 0x878
# define CG_ULV_PARAMETER 0x87c
# define SMC_SCRATCH0 0x884
# define CG_CAC_CTRL 0x8b8
# define CAC_WINDOW(x) ((x) << 0)
# define CAC_WINDOW_MASK 0x00ffffff
2012-03-20 17:18:11 -04:00
# define DMIF_ADDR_CONFIG 0xBD4
2013-04-05 10:28:08 -04:00
# define DMIF_ADDR_CALC 0xC00
2013-08-19 11:15:43 -04:00
# define PIPE0_DMIF_BUFFER_CONTROL 0x0ca0
# define DMIF_BUFFERS_ALLOCATED(x) ((x) << 0)
# define DMIF_BUFFERS_ALLOCATED_COMPLETED (1 << 4)
2012-03-20 17:18:12 -04:00
# define SRBM_STATUS 0xE50
2013-01-18 19:36:20 -05:00
# define GRBM_RQ_PENDING (1 << 5)
# define VMC_BUSY (1 << 8)
# define MCB_BUSY (1 << 9)
# define MCB_NON_DISPLAY_BUSY (1 << 10)
# define MCC_BUSY (1 << 11)
# define MCD_BUSY (1 << 12)
# define SEM_BUSY (1 << 14)
# define IH_BUSY (1 << 17)
2012-03-20 17:18:12 -04:00
2013-01-02 17:30:35 -05:00
# define SRBM_SOFT_RESET 0x0E60
# define SOFT_RESET_BIF (1 << 1)
# define SOFT_RESET_DC (1 << 5)
# define SOFT_RESET_DMA1 (1 << 6)
# define SOFT_RESET_GRBM (1 << 8)
# define SOFT_RESET_HDP (1 << 9)
# define SOFT_RESET_IH (1 << 10)
# define SOFT_RESET_MC (1 << 11)
# define SOFT_RESET_ROM (1 << 14)
# define SOFT_RESET_SEM (1 << 15)
# define SOFT_RESET_VMC (1 << 17)
# define SOFT_RESET_DMA (1 << 20)
# define SOFT_RESET_TST (1 << 21)
# define SOFT_RESET_REGBB (1 << 22)
# define SOFT_RESET_ORB (1 << 23)
2012-03-20 17:18:11 -04:00
# define CC_SYS_RB_BACKEND_DISABLE 0xe80
# define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84
2015-02-18 13:19:27 +01:00
# define SRBM_READ_ERROR 0xE98
# define SRBM_INT_CNTL 0xEA0
# define SRBM_INT_ACK 0xEA8
2013-01-18 19:36:20 -05:00
# define SRBM_STATUS2 0x0EC4
# define DMA_BUSY (1 << 5)
# define DMA1_BUSY (1 << 6)
2012-03-20 17:18:13 -04:00
# define VM_L2_CNTL 0x1400
# define ENABLE_L2_CACHE (1 << 0)
# define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1)
# define L2_CACHE_PTE_ENDIAN_SWAP_MODE(x) ((x) << 2)
# define L2_CACHE_PDE_ENDIAN_SWAP_MODE(x) ((x) << 4)
# define ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE (1 << 9)
# define ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE (1 << 10)
# define EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 7) << 15)
# define CONTEXT1_IDENTITY_ACCESS_MODE(x) (((x) & 3) << 19)
# define VM_L2_CNTL2 0x1404
# define INVALIDATE_ALL_L1_TLBS (1 << 0)
# define INVALIDATE_L2_CACHE (1 << 1)
# define INVALIDATE_CACHE_MODE(x) ((x) << 26)
# define INVALIDATE_PTE_AND_PDE_CACHES 0
# define INVALIDATE_ONLY_PTE_CACHES 1
# define INVALIDATE_ONLY_PDE_CACHES 2
# define VM_L2_CNTL3 0x1408
# define BANK_SELECT(x) ((x) << 0)
# define L2_CACHE_UPDATE_MODE(x) ((x) << 6)
# define L2_CACHE_BIGK_FRAGMENT_SIZE(x) ((x) << 15)
# define L2_CACHE_BIGK_ASSOCIATIVITY (1 << 20)
# define VM_L2_STATUS 0x140C
# define L2_BUSY (1 << 0)
# define VM_CONTEXT0_CNTL 0x1410
# define ENABLE_CONTEXT (1 << 0)
# define PAGE_TABLE_DEPTH(x) (((x) & 3) << 1)
2012-09-18 15:30:44 -04:00
# define RANGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 3)
2012-03-20 17:18:13 -04:00
# define RANGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 4)
2012-09-18 15:30:44 -04:00
# define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 6)
# define DUMMY_PAGE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 7)
# define PDE0_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 9)
# define PDE0_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 10)
# define VALID_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 12)
# define VALID_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 13)
# define READ_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 15)
# define READ_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 16)
# define WRITE_PROTECTION_FAULT_ENABLE_INTERRUPT (1 << 18)
# define WRITE_PROTECTION_FAULT_ENABLE_DEFAULT (1 << 19)
2014-05-10 12:17:56 +02:00
# define PAGE_TABLE_BLOCK_SIZE(x) (((x) & 0xF) << 24)
2012-03-20 17:18:13 -04:00
# define VM_CONTEXT1_CNTL 0x1414
# define VM_CONTEXT0_CNTL2 0x1430
# define VM_CONTEXT1_CNTL2 0x1434
# define VM_CONTEXT8_PAGE_TABLE_BASE_ADDR 0x1438
# define VM_CONTEXT9_PAGE_TABLE_BASE_ADDR 0x143c
# define VM_CONTEXT10_PAGE_TABLE_BASE_ADDR 0x1440
# define VM_CONTEXT11_PAGE_TABLE_BASE_ADDR 0x1444
# define VM_CONTEXT12_PAGE_TABLE_BASE_ADDR 0x1448
# define VM_CONTEXT13_PAGE_TABLE_BASE_ADDR 0x144c
# define VM_CONTEXT14_PAGE_TABLE_BASE_ADDR 0x1450
# define VM_CONTEXT15_PAGE_TABLE_BASE_ADDR 0x1454
2012-09-18 15:30:44 -04:00
# define VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x14FC
# define VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x14DC
2013-06-13 18:47:58 -04:00
# define PROTECTIONS_MASK (0xf << 0)
# define PROTECTIONS_SHIFT 0
/* bit 0: range
* bit 1 : pde0
* bit 2 : valid
* bit 3 : read
* bit 4 : write
*/
# define MEMORY_CLIENT_ID_MASK (0xff << 12)
# define MEMORY_CLIENT_ID_SHIFT 12
# define MEMORY_CLIENT_RW_MASK (1 << 24)
# define MEMORY_CLIENT_RW_SHIFT 24
# define FAULT_VMID_MASK (0xf << 25)
# define FAULT_VMID_SHIFT 25
2012-09-18 15:30:44 -04:00
2012-03-20 17:18:13 -04:00
# define VM_INVALIDATE_REQUEST 0x1478
# define VM_INVALIDATE_RESPONSE 0x147c
# define VM_CONTEXT0_PROTECTION_FAULT_DEFAULT_ADDR 0x1518
# define VM_CONTEXT1_PROTECTION_FAULT_DEFAULT_ADDR 0x151c
# define VM_CONTEXT0_PAGE_TABLE_BASE_ADDR 0x153c
# define VM_CONTEXT1_PAGE_TABLE_BASE_ADDR 0x1540
# define VM_CONTEXT2_PAGE_TABLE_BASE_ADDR 0x1544
# define VM_CONTEXT3_PAGE_TABLE_BASE_ADDR 0x1548
# define VM_CONTEXT4_PAGE_TABLE_BASE_ADDR 0x154c
# define VM_CONTEXT5_PAGE_TABLE_BASE_ADDR 0x1550
# define VM_CONTEXT6_PAGE_TABLE_BASE_ADDR 0x1554
# define VM_CONTEXT7_PAGE_TABLE_BASE_ADDR 0x1558
# define VM_CONTEXT0_PAGE_TABLE_START_ADDR 0x155c
# define VM_CONTEXT1_PAGE_TABLE_START_ADDR 0x1560
# define VM_CONTEXT0_PAGE_TABLE_END_ADDR 0x157C
# define VM_CONTEXT1_PAGE_TABLE_END_ADDR 0x1580
2013-03-07 12:56:35 -05:00
# define VM_L2_CG 0x15c0
# define MC_CG_ENABLE (1 << 18)
# define MC_LS_ENABLE (1 << 19)
2012-03-20 17:18:00 -04:00
# define MC_SHARED_CHMAP 0x2004
# define NOOFCHAN_SHIFT 12
# define NOOFCHAN_MASK 0x0000f000
2012-03-20 17:18:11 -04:00
# define MC_SHARED_CHREMAP 0x2008
2012-03-20 17:18:13 -04:00
# define MC_VM_FB_LOCATION 0x2024
# define MC_VM_AGP_TOP 0x2028
# define MC_VM_AGP_BOT 0x202C
# define MC_VM_AGP_BASE 0x2030
# define MC_VM_SYSTEM_APERTURE_LOW_ADDR 0x2034
# define MC_VM_SYSTEM_APERTURE_HIGH_ADDR 0x2038
# define MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR 0x203C
# define MC_VM_MX_L1_TLB_CNTL 0x2064
# define ENABLE_L1_TLB (1 << 0)
# define ENABLE_L1_FRAGMENT_PROCESSING (1 << 1)
# define SYSTEM_ACCESS_MODE_PA_ONLY (0 << 3)
# define SYSTEM_ACCESS_MODE_USE_SYS_MAP (1 << 3)
# define SYSTEM_ACCESS_MODE_IN_SYS (2 << 3)
# define SYSTEM_ACCESS_MODE_NOT_IN_SYS (3 << 3)
# define SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU (0 << 5)
# define ENABLE_ADVANCED_DRIVER_MODEL (1 << 6)
2012-03-20 17:18:18 -04:00
# define MC_SHARED_BLACKOUT_CNTL 0x20ac
2013-03-07 12:56:35 -05:00
# define MC_HUB_MISC_HUB_CG 0x20b8
# define MC_HUB_MISC_VM_CG 0x20bc
# define MC_HUB_MISC_SIP_CG 0x20c0
# define MC_XPB_CLK_GAT 0x2478
# define MC_CITF_MISC_RD_CG 0x2648
# define MC_CITF_MISC_WR_CG 0x264c
# define MC_CITF_MISC_VM_CG 0x2650
2012-03-20 17:18:11 -04:00
# define MC_ARB_RAMCFG 0x2760
# define NOOFBANK_SHIFT 0
# define NOOFBANK_MASK 0x00000003
# define NOOFRANK_SHIFT 2
# define NOOFRANK_MASK 0x00000004
# define NOOFROWS_SHIFT 3
# define NOOFROWS_MASK 0x00000038
# define NOOFCOLS_SHIFT 6
# define NOOFCOLS_MASK 0x000000C0
# define CHANSIZE_SHIFT 8
# define CHANSIZE_MASK 0x00000100
2012-03-20 17:18:13 -04:00
# define CHANSIZE_OVERRIDE (1 << 11)
2012-03-20 17:18:11 -04:00
# define NOOFGROUPS_SHIFT 12
# define NOOFGROUPS_MASK 0x00001000
2013-06-25 17:56:16 -04:00
# define MC_ARB_DRAM_TIMING 0x2774
# define MC_ARB_DRAM_TIMING2 0x2778
# define MC_ARB_BURST_TIME 0x2808
# define STATE0(x) ((x) << 0)
# define STATE0_MASK (0x1f << 0)
# define STATE0_SHIFT 0
# define STATE1(x) ((x) << 5)
# define STATE1_MASK (0x1f << 5)
# define STATE1_SHIFT 5
# define STATE2(x) ((x) << 10)
# define STATE2_MASK (0x1f << 10)
# define STATE2_SHIFT 10
# define STATE3(x) ((x) << 15)
# define STATE3_MASK (0x1f << 15)
# define STATE3_SHIFT 15
2013-10-28 10:56:23 -04:00
# define MC_SEQ_TRAIN_WAKEUP_CNTL 0x28e8
2012-03-20 17:18:18 -04:00
# define TRAIN_DONE_D0 (1 << 30)
# define TRAIN_DONE_D1 (1 << 31)
# define MC_SEQ_SUP_CNTL 0x28c8
# define RUN_MASK (1 << 0)
# define MC_SEQ_SUP_PGM 0x28cc
2013-06-25 17:56:16 -04:00
# define MC_PMG_AUTO_CMD 0x28d0
2012-03-20 17:18:18 -04:00
# define MC_IO_PAD_CNTL_D0 0x29d0
# define MEM_FALL_OUT_CMD (1 << 8)
2013-06-25 17:56:16 -04:00
# define MC_SEQ_RAS_TIMING 0x28a0
# define MC_SEQ_CAS_TIMING 0x28a4
# define MC_SEQ_MISC_TIMING 0x28a8
# define MC_SEQ_MISC_TIMING2 0x28ac
# define MC_SEQ_PMG_TIMING 0x28b0
# define MC_SEQ_RD_CTL_D0 0x28b4
# define MC_SEQ_RD_CTL_D1 0x28b8
# define MC_SEQ_WR_CTL_D0 0x28bc
# define MC_SEQ_WR_CTL_D1 0x28c0
2013-02-15 16:49:59 -05:00
# define MC_SEQ_MISC0 0x2a00
2013-06-25 17:56:16 -04:00
# define MC_SEQ_MISC0_VEN_ID_SHIFT 8
# define MC_SEQ_MISC0_VEN_ID_MASK 0x00000f00
# define MC_SEQ_MISC0_VEN_ID_VALUE 3
# define MC_SEQ_MISC0_REV_ID_SHIFT 12
# define MC_SEQ_MISC0_REV_ID_MASK 0x0000f000
# define MC_SEQ_MISC0_REV_ID_VALUE 1
# define MC_SEQ_MISC0_GDDR5_SHIFT 28
# define MC_SEQ_MISC0_GDDR5_MASK 0xf0000000
# define MC_SEQ_MISC0_GDDR5_VALUE 5
# define MC_SEQ_MISC1 0x2a04
# define MC_SEQ_RESERVE_M 0x2a08
# define MC_PMG_CMD_EMRS 0x2a0c
2013-02-15 16:49:59 -05:00
2012-03-20 17:18:18 -04:00
# define MC_SEQ_IO_DEBUG_INDEX 0x2a44
# define MC_SEQ_IO_DEBUG_DATA 0x2a48
2013-06-25 17:56:16 -04:00
# define MC_SEQ_MISC5 0x2a54
# define MC_SEQ_MISC6 0x2a58
# define MC_SEQ_MISC7 0x2a64
# define MC_SEQ_RAS_TIMING_LP 0x2a6c
# define MC_SEQ_CAS_TIMING_LP 0x2a70
# define MC_SEQ_MISC_TIMING_LP 0x2a74
# define MC_SEQ_MISC_TIMING2_LP 0x2a78
# define MC_SEQ_WR_CTL_D0_LP 0x2a7c
# define MC_SEQ_WR_CTL_D1_LP 0x2a80
# define MC_SEQ_PMG_CMD_EMRS_LP 0x2a84
# define MC_SEQ_PMG_CMD_MRS_LP 0x2a88
# define MC_PMG_CMD_MRS 0x2aac
# define MC_SEQ_RD_CTL_D0_LP 0x2b1c
# define MC_SEQ_RD_CTL_D1_LP 0x2b20
# define MC_PMG_CMD_MRS1 0x2b44
# define MC_SEQ_PMG_CMD_MRS1_LP 0x2b48
# define MC_SEQ_PMG_TIMING_LP 0x2b4c
# define MC_SEQ_WR_CTL_2 0x2b54
# define MC_SEQ_WR_CTL_2_LP 0x2b58
# define MC_PMG_CMD_MRS2 0x2b5c
# define MC_SEQ_PMG_CMD_MRS2_LP 0x2b60
# define MCLK_PWRMGT_CNTL 0x2ba0
# define DLL_SPEED(x) ((x) << 0)
# define DLL_SPEED_MASK (0x1f << 0)
# define DLL_READY (1 << 6)
# define MC_INT_CNTL (1 << 7)
# define MRDCK0_PDNB (1 << 8)
# define MRDCK1_PDNB (1 << 9)
# define MRDCK0_RESET (1 << 16)
# define MRDCK1_RESET (1 << 17)
# define DLL_READY_READ (1 << 24)
# define DLL_CNTL 0x2ba4
# define MRDCK0_BYPASS (1 << 24)
# define MRDCK1_BYPASS (1 << 25)
2013-11-15 16:35:55 -05:00
# define MPLL_CNTL_MODE 0x2bb0
# define MPLL_MCLK_SEL (1 << 11)
2013-06-25 17:56:16 -04:00
# define MPLL_FUNC_CNTL 0x2bb4
# define BWCTRL(x) ((x) << 20)
# define BWCTRL_MASK (0xff << 20)
# define MPLL_FUNC_CNTL_1 0x2bb8
# define VCO_MODE(x) ((x) << 0)
# define VCO_MODE_MASK (3 << 0)
# define CLKFRAC(x) ((x) << 4)
# define CLKFRAC_MASK (0xfff << 4)
# define CLKF(x) ((x) << 16)
# define CLKF_MASK (0xfff << 16)
# define MPLL_FUNC_CNTL_2 0x2bbc
# define MPLL_AD_FUNC_CNTL 0x2bc0
# define YCLK_POST_DIV(x) ((x) << 0)
# define YCLK_POST_DIV_MASK (7 << 0)
# define MPLL_DQ_FUNC_CNTL 0x2bc4
# define YCLK_SEL(x) ((x) << 4)
# define YCLK_SEL_MASK (1 << 4)
# define MPLL_SS1 0x2bcc
# define CLKV(x) ((x) << 0)
# define CLKV_MASK (0x3ffffff << 0)
# define MPLL_SS2 0x2bd0
# define CLKS(x) ((x) << 0)
# define CLKS_MASK (0xfff << 0)
2012-03-20 17:18:11 -04:00
# define HDP_HOST_PATH_CNTL 0x2C00
2013-08-08 19:34:07 -04:00
# define CLOCK_GATING_DIS (1 << 23)
2012-03-20 17:18:13 -04:00
# define HDP_NONSURFACE_BASE 0x2C04
# define HDP_NONSURFACE_INFO 0x2C08
# define HDP_NONSURFACE_SIZE 0x2C0C
2012-03-20 17:18:11 -04:00
# define HDP_ADDR_CONFIG 0x2F48
# define HDP_MISC_CNTL 0x2F4C
# define HDP_FLUSH_INVALIDATE_CACHE (1 << 0)
2013-08-08 19:34:07 -04:00
# define HDP_MEM_POWER_LS 0x2F50
# define HDP_LS_ENABLE (1 << 0)
2012-03-20 17:18:11 -04:00
2013-03-07 12:56:35 -05:00
# define ATC_MISC_CG 0x3350
2012-03-20 17:18:22 -04:00
# define IH_RB_CNTL 0x3e00
# define IH_RB_ENABLE (1 << 0)
# define IH_IB_SIZE(x) ((x) << 1) /* log2 */
# define IH_RB_FULL_DRAIN_ENABLE (1 << 6)
# define IH_WPTR_WRITEBACK_ENABLE (1 << 8)
# define IH_WPTR_WRITEBACK_TIMER(x) ((x) << 9) /* log2 */
# define IH_WPTR_OVERFLOW_ENABLE (1 << 16)
# define IH_WPTR_OVERFLOW_CLEAR (1 << 31)
# define IH_RB_BASE 0x3e04
# define IH_RB_RPTR 0x3e08
# define IH_RB_WPTR 0x3e0c
# define RB_OVERFLOW (1 << 0)
# define WPTR_OFFSET_MASK 0x3fffc
# define IH_RB_WPTR_ADDR_HI 0x3e10
# define IH_RB_WPTR_ADDR_LO 0x3e14
# define IH_CNTL 0x3e18
# define ENABLE_INTR (1 << 0)
# define IH_MC_SWAP(x) ((x) << 1)
# define IH_MC_SWAP_NONE 0
# define IH_MC_SWAP_16BIT 1
# define IH_MC_SWAP_32BIT 2
# define IH_MC_SWAP_64BIT 3
# define RPTR_REARM (1 << 4)
# define MC_WRREQ_CREDIT(x) ((x) << 15)
# define MC_WR_CLEAN_CNT(x) ((x) << 20)
# define MC_VMID(x) ((x) << 25)
2012-03-20 17:18:13 -04:00
# define CONFIG_MEMSIZE 0x5428
2012-03-20 17:18:22 -04:00
# define INTERRUPT_CNTL 0x5468
# define IH_DUMMY_RD_OVERRIDE (1 << 0)
# define IH_DUMMY_RD_EN (1 << 1)
# define IH_REQ_NONSNOOP_EN (1 << 3)
# define GEN_IH_INT_EN (1 << 8)
# define INTERRUPT_CNTL2 0x546c
2012-03-20 17:18:13 -04:00
# define HDP_MEM_COHERENCY_FLUSH_CNTL 0x5480
2012-03-20 17:18:11 -04:00
# define BIF_FB_EN 0x5490
# define FB_READ_EN (1 << 0)
# define FB_WRITE_EN (1 << 1)
2012-03-20 17:18:00 -04:00
2012-03-20 17:18:13 -04:00
# define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
2013-07-31 16:51:33 -04:00
/* DCE6 ELD audio interface */
# define AZ_F0_CODEC_ENDPOINT_INDEX 0x5E00
# define AZ_ENDPOINT_REG_INDEX(x) (((x) & 0xff) << 0)
# define AZ_ENDPOINT_REG_WRITE_EN (1 << 8)
# define AZ_F0_CODEC_ENDPOINT_DATA 0x5E04
# define AZ_F0_CODEC_PIN_CONTROL_CHANNEL_SPEAKER 0x25
# define SPEAKER_ALLOCATION(x) (((x) & 0x7f) << 0)
# define SPEAKER_ALLOCATION_MASK (0x7f << 0)
# define SPEAKER_ALLOCATION_SHIFT 0
# define HDMI_CONNECTION (1 << 16)
# define DP_CONNECTION (1 << 17)
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR0 0x28 /* LPCM */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR1 0x29 /* AC3 */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR2 0x2A /* MPEG1 */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR3 0x2B /* MP3 */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR4 0x2C /* MPEG2 */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR5 0x2D /* AAC */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR6 0x2E /* DTS */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR7 0x2F /* ATRAC */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR8 0x30 /* one bit audio - leave at 0 (default) */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR9 0x31 /* Dolby Digital */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR10 0x32 /* DTS-HD */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR11 0x33 /* MAT-MLP */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR12 0x34 /* DTS */
# define AZ_F0_CODEC_PIN_CONTROL_AUDIO_DESCRIPTOR13 0x35 /* WMA Pro */
# define MAX_CHANNELS(x) (((x) & 0x7) << 0)
/* max channels minus one. 7 = 8 channels */
# define SUPPORTED_FREQUENCIES(x) (((x) & 0xff) << 8)
# define DESCRIPTOR_BYTE_2(x) (((x) & 0xff) << 16)
# define SUPPORTED_FREQUENCIES_STEREO(x) (((x) & 0xff) << 24) /* LPCM only */
/* SUPPORTED_FREQUENCIES, SUPPORTED_FREQUENCIES_STEREO
* bit0 = 32 kHz
* bit1 = 44.1 kHz
* bit2 = 48 kHz
* bit3 = 88.2 kHz
* bit4 = 96 kHz
* bit5 = 176.4 kHz
* bit6 = 192 kHz
*/
2013-10-10 18:03:06 -04:00
# define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_LIPSYNC 0x37
# define VIDEO_LIPSYNC(x) (((x) & 0xff) << 0)
# define AUDIO_LIPSYNC(x) (((x) & 0xff) << 8)
/* VIDEO_LIPSYNC, AUDIO_LIPSYNC
* 0 = invalid
* x = legal delay value
* 255 = sync not supported
*/
# define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_HBR 0x38
# define HBR_CAPABLE (1 << 0) /* enabled by default */
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO0 0x3a
# define MANUFACTURER_ID(x) (((x) & 0xffff) << 0)
# define PRODUCT_ID(x) (((x) & 0xffff) << 16)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO1 0x3b
# define SINK_DESCRIPTION_LEN(x) (((x) & 0xff) << 0)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO2 0x3c
# define PORT_ID0(x) (((x) & 0xffffffff) << 0)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO3 0x3d
# define PORT_ID1(x) (((x) & 0xffffffff) << 0)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO4 0x3e
# define DESCRIPTION0(x) (((x) & 0xff) << 0)
# define DESCRIPTION1(x) (((x) & 0xff) << 8)
# define DESCRIPTION2(x) (((x) & 0xff) << 16)
# define DESCRIPTION3(x) (((x) & 0xff) << 24)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO5 0x3f
# define DESCRIPTION4(x) (((x) & 0xff) << 0)
# define DESCRIPTION5(x) (((x) & 0xff) << 8)
# define DESCRIPTION6(x) (((x) & 0xff) << 16)
# define DESCRIPTION7(x) (((x) & 0xff) << 24)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO6 0x40
# define DESCRIPTION8(x) (((x) & 0xff) << 0)
# define DESCRIPTION9(x) (((x) & 0xff) << 8)
# define DESCRIPTION10(x) (((x) & 0xff) << 16)
# define DESCRIPTION11(x) (((x) & 0xff) << 24)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO7 0x41
# define DESCRIPTION12(x) (((x) & 0xff) << 0)
# define DESCRIPTION13(x) (((x) & 0xff) << 8)
# define DESCRIPTION14(x) (((x) & 0xff) << 16)
# define DESCRIPTION15(x) (((x) & 0xff) << 24)
# define AZ_F0_CODEC_PIN_CONTROL_SINK_INFO8 0x42
# define DESCRIPTION16(x) (((x) & 0xff) << 0)
# define DESCRIPTION17(x) (((x) & 0xff) << 8)
2014-09-18 16:19:04 -04:00
# define AZ_F0_CODEC_PIN_CONTROL_HOT_PLUG_CONTROL 0x54
2013-07-31 16:51:33 -04:00
# define AUDIO_ENABLED (1 << 31)
# define AZ_F0_CODEC_PIN_CONTROL_RESPONSE_CONFIGURATION_DEFAULT 0x56
# define PORT_CONNECTIVITY_MASK (3 << 30)
# define PORT_CONNECTIVITY_SHIFT 30
2012-03-20 17:18:00 -04:00
# define DC_LB_MEMORY_SPLIT 0x6b0c
# define DC_LB_MEMORY_CONFIG(x) ((x) << 20)
# define PRIORITY_A_CNT 0x6b18
# define PRIORITY_MARK_MASK 0x7fff
# define PRIORITY_OFF (1 << 16)
# define PRIORITY_ALWAYS_ON (1 << 20)
# define PRIORITY_B_CNT 0x6b1c
# define DPG_PIPE_ARBITRATION_CONTROL3 0x6cc8
# define LATENCY_WATERMARK_MASK(x) ((x) << 16)
# define DPG_PIPE_LATENCY_CONTROL 0x6ccc
# define LATENCY_LOW_WATERMARK(x) ((x) << 0)
# define LATENCY_HIGH_WATERMARK(x) ((x) << 16)
2012-03-20 17:18:22 -04:00
/* 0x6bb8, 0x77b8, 0x103b8, 0x10fb8, 0x11bb8, 0x127b8 */
# define VLINE_STATUS 0x6bb8
# define VLINE_OCCURRED (1 << 0)
# define VLINE_ACK (1 << 4)
# define VLINE_STAT (1 << 12)
# define VLINE_INTERRUPT (1 << 16)
# define VLINE_INTERRUPT_TYPE (1 << 17)
/* 0x6bbc, 0x77bc, 0x103bc, 0x10fbc, 0x11bbc, 0x127bc */
# define VBLANK_STATUS 0x6bbc
# define VBLANK_OCCURRED (1 << 0)
# define VBLANK_ACK (1 << 4)
# define VBLANK_STAT (1 << 12)
# define VBLANK_INTERRUPT (1 << 16)
# define VBLANK_INTERRUPT_TYPE (1 << 17)
/* 0x6b40, 0x7740, 0x10340, 0x10f40, 0x11b40, 0x12740 */
# define INT_MASK 0x6b40
# define VBLANK_INT_MASK (1 << 0)
# define VLINE_INT_MASK (1 << 4)
# define DISP_INTERRUPT_STATUS 0x60f4
# define LB_D1_VLINE_INTERRUPT (1 << 2)
# define LB_D1_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD1_INTERRUPT (1 << 17)
# define DC_HPD1_RX_INTERRUPT (1 << 18)
# define DACA_AUTODETECT_INTERRUPT (1 << 22)
# define DACB_AUTODETECT_INTERRUPT (1 << 23)
# define DC_I2C_SW_DONE_INTERRUPT (1 << 24)
# define DC_I2C_HW_DONE_INTERRUPT (1 << 25)
# define DISP_INTERRUPT_STATUS_CONTINUE 0x60f8
# define LB_D2_VLINE_INTERRUPT (1 << 2)
# define LB_D2_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD2_INTERRUPT (1 << 17)
# define DC_HPD2_RX_INTERRUPT (1 << 18)
# define DISP_TIMER_INTERRUPT (1 << 24)
# define DISP_INTERRUPT_STATUS_CONTINUE2 0x60fc
# define LB_D3_VLINE_INTERRUPT (1 << 2)
# define LB_D3_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD3_INTERRUPT (1 << 17)
# define DC_HPD3_RX_INTERRUPT (1 << 18)
# define DISP_INTERRUPT_STATUS_CONTINUE3 0x6100
# define LB_D4_VLINE_INTERRUPT (1 << 2)
# define LB_D4_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD4_INTERRUPT (1 << 17)
# define DC_HPD4_RX_INTERRUPT (1 << 18)
# define DISP_INTERRUPT_STATUS_CONTINUE4 0x614c
# define LB_D5_VLINE_INTERRUPT (1 << 2)
# define LB_D5_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD5_INTERRUPT (1 << 17)
# define DC_HPD5_RX_INTERRUPT (1 << 18)
# define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150
# define LB_D6_VLINE_INTERRUPT (1 << 2)
# define LB_D6_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD6_INTERRUPT (1 << 17)
# define DC_HPD6_RX_INTERRUPT (1 << 18)
/* 0x6858, 0x7458, 0x10058, 0x10c58, 0x11858, 0x12458 */
# define GRPH_INT_STATUS 0x6858
# define GRPH_PFLIP_INT_OCCURRED (1 << 0)
# define GRPH_PFLIP_INT_CLEAR (1 << 8)
/* 0x685c, 0x745c, 0x1005c, 0x10c5c, 0x1185c, 0x1245c */
# define GRPH_INT_CONTROL 0x685c
# define GRPH_PFLIP_INT_MASK (1 << 0)
# define GRPH_PFLIP_INT_TYPE (1 << 8)
2014-01-27 11:54:44 -05:00
# define DAC_AUTODETECT_INT_CONTROL 0x67c8
2012-03-20 17:18:22 -04:00
# define DC_HPD1_INT_STATUS 0x601c
# define DC_HPD2_INT_STATUS 0x6028
# define DC_HPD3_INT_STATUS 0x6034
# define DC_HPD4_INT_STATUS 0x6040
# define DC_HPD5_INT_STATUS 0x604c
# define DC_HPD6_INT_STATUS 0x6058
# define DC_HPDx_INT_STATUS (1 << 0)
# define DC_HPDx_SENSE (1 << 1)
# define DC_HPDx_RX_INT_STATUS (1 << 8)
# define DC_HPD1_INT_CONTROL 0x6020
# define DC_HPD2_INT_CONTROL 0x602c
# define DC_HPD3_INT_CONTROL 0x6038
# define DC_HPD4_INT_CONTROL 0x6044
# define DC_HPD5_INT_CONTROL 0x6050
# define DC_HPD6_INT_CONTROL 0x605c
# define DC_HPDx_INT_ACK (1 << 0)
# define DC_HPDx_INT_POLARITY (1 << 8)
# define DC_HPDx_INT_EN (1 << 16)
# define DC_HPDx_RX_INT_ACK (1 << 20)
# define DC_HPDx_RX_INT_EN (1 << 24)
# define DC_HPD1_CONTROL 0x6024
# define DC_HPD2_CONTROL 0x6030
# define DC_HPD3_CONTROL 0x603c
# define DC_HPD4_CONTROL 0x6048
# define DC_HPD5_CONTROL 0x6054
# define DC_HPD6_CONTROL 0x6060
# define DC_HPDx_CONNECTION_TIMER(x) ((x) << 0)
# define DC_HPDx_RX_INT_TIMER(x) ((x) << 16)
# define DC_HPDx_EN (1 << 28)
2013-06-25 17:56:16 -04:00
# define DPG_PIPE_STUTTER_CONTROL 0x6cd4
# define STUTTER_ENABLE (1 << 0)
2012-03-20 17:18:22 -04:00
/* 0x6e98, 0x7a98, 0x10698, 0x11298, 0x11e98, 0x12a98 */
# define CRTC_STATUS_FRAME_COUNT 0x6e98
2014-12-05 13:38:31 -05:00
/* Audio clocks */
# define DCCG_AUDIO_DTO_SOURCE 0x05ac
# define DCCG_AUDIO_DTO0_SOURCE_SEL(x) ((x) << 0) /* crtc0 - crtc5 */
# define DCCG_AUDIO_DTO_SEL (1 << 4) /* 0=dto0 1=dto1 */
# define DCCG_AUDIO_DTO0_PHASE 0x05b0
# define DCCG_AUDIO_DTO0_MODULE 0x05b4
2015-03-02 12:05:29 -05:00
# define DCCG_AUDIO_DTO1_PHASE 0x05c0
# define DCCG_AUDIO_DTO1_MODULE 0x05c4
2014-12-05 13:38:31 -05:00
2015-12-17 11:09:58 -05:00
# define DENTIST_DISPCLK_CNTL 0x0490
# define DENTIST_DPREFCLK_WDIVIDER(x) (((x) & 0x7f) << 24)
# define DENTIST_DPREFCLK_WDIVIDER_MASK (0x7f << 24)
# define DENTIST_DPREFCLK_WDIVIDER_SHIFT 24
2013-07-31 16:51:33 -04:00
# define AFMT_AUDIO_SRC_CONTROL 0x713c
# define AFMT_AUDIO_SRC_SELECT(x) (((x) & 7) << 0)
/* AFMT_AUDIO_SRC_SELECT
* 0 = stream0
* 1 = stream1
* 2 = stream2
* 3 = stream3
* 4 = stream4
* 5 = stream5
*/
2012-03-20 17:18:11 -04:00
# define GRBM_CNTL 0x8000
# define GRBM_READ_TIMEOUT(x) ((x) << 0)
2012-03-20 17:18:12 -04:00
# define GRBM_STATUS2 0x8008
# define RLC_RQ_PENDING (1 << 0)
# define RLC_BUSY (1 << 8)
# define TC_BUSY (1 << 9)
# define GRBM_STATUS 0x8010
# define CMDFIFO_AVAIL_MASK 0x0000000F
# define RING2_RQ_PENDING (1 << 4)
# define SRBM_RQ_PENDING (1 << 5)
# define RING1_RQ_PENDING (1 << 6)
# define CF_RQ_PENDING (1 << 7)
# define PF_RQ_PENDING (1 << 8)
# define GDS_DMA_RQ_PENDING (1 << 9)
# define GRBM_EE_BUSY (1 << 10)
# define DB_CLEAN (1 << 12)
# define CB_CLEAN (1 << 13)
# define TA_BUSY (1 << 14)
# define GDS_BUSY (1 << 15)
# define VGT_BUSY (1 << 17)
# define IA_BUSY_NO_DMA (1 << 18)
# define IA_BUSY (1 << 19)
# define SX_BUSY (1 << 20)
# define SPI_BUSY (1 << 22)
# define BCI_BUSY (1 << 23)
# define SC_BUSY (1 << 24)
# define PA_BUSY (1 << 25)
# define DB_BUSY (1 << 26)
# define CP_COHERENCY_BUSY (1 << 28)
# define CP_BUSY (1 << 29)
# define CB_BUSY (1 << 30)
# define GUI_ACTIVE (1 << 31)
# define GRBM_STATUS_SE0 0x8014
# define GRBM_STATUS_SE1 0x8018
# define SE_DB_CLEAN (1 << 1)
# define SE_CB_CLEAN (1 << 2)
# define SE_BCI_BUSY (1 << 22)
# define SE_VGT_BUSY (1 << 23)
# define SE_PA_BUSY (1 << 24)
# define SE_TA_BUSY (1 << 25)
# define SE_SX_BUSY (1 << 26)
# define SE_SPI_BUSY (1 << 27)
# define SE_SC_BUSY (1 << 29)
# define SE_DB_BUSY (1 << 30)
# define SE_CB_BUSY (1 << 31)
# define GRBM_SOFT_RESET 0x8020
# define SOFT_RESET_CP (1 << 0)
# define SOFT_RESET_CB (1 << 1)
# define SOFT_RESET_RLC (1 << 2)
# define SOFT_RESET_DB (1 << 3)
# define SOFT_RESET_GDS (1 << 4)
# define SOFT_RESET_PA (1 << 5)
# define SOFT_RESET_SC (1 << 6)
# define SOFT_RESET_BCI (1 << 7)
# define SOFT_RESET_SPI (1 << 8)
# define SOFT_RESET_SX (1 << 10)
# define SOFT_RESET_TC (1 << 11)
# define SOFT_RESET_TA (1 << 12)
# define SOFT_RESET_VGT (1 << 14)
# define SOFT_RESET_IA (1 << 15)
2012-03-20 17:18:15 -04:00
# define GRBM_GFX_INDEX 0x802C
2012-06-01 18:58:22 -04:00
# define INSTANCE_INDEX(x) ((x) << 0)
# define SH_INDEX(x) ((x) << 8)
# define SE_INDEX(x) ((x) << 16)
# define SH_BROADCAST_WRITES (1 << 29)
# define INSTANCE_BROADCAST_WRITES (1 << 30)
# define SE_BROADCAST_WRITES (1 << 31)
2012-03-20 17:18:15 -04:00
2012-03-20 17:18:22 -04:00
# define GRBM_INT_CNTL 0x8060
# define RDERR_INT_ENABLE (1 << 0)
# define GUI_IDLE_INT_ENABLE (1 << 19)
2012-11-08 10:13:24 -05:00
# define CP_STRMOUT_CNTL 0x84FC
2012-03-20 17:18:19 -04:00
# define SCRATCH_REG0 0x8500
# define SCRATCH_REG1 0x8504
# define SCRATCH_REG2 0x8508
# define SCRATCH_REG3 0x850C
# define SCRATCH_REG4 0x8510
# define SCRATCH_REG5 0x8514
# define SCRATCH_REG6 0x8518
# define SCRATCH_REG7 0x851C
# define SCRATCH_UMSK 0x8540
# define SCRATCH_ADDR 0x8544
# define CP_SEM_WAIT_TIMER 0x85BC
# define CP_SEM_INCOMPLETE_TIMER_CNTL 0x85C8
2012-03-20 17:18:12 -04:00
# define CP_ME_CNTL 0x86D8
# define CP_CE_HALT (1 << 24)
# define CP_PFP_HALT (1 << 26)
# define CP_ME_HALT (1 << 28)
2012-03-20 17:18:20 -04:00
# define CP_COHER_CNTL2 0x85E8
2012-03-20 17:18:19 -04:00
# define CP_RB2_RPTR 0x86f8
# define CP_RB1_RPTR 0x86fc
2012-03-20 17:18:12 -04:00
# define CP_RB0_RPTR 0x8700
2012-03-20 17:18:19 -04:00
# define CP_RB_WPTR_DELAY 0x8704
2012-03-20 17:18:12 -04:00
2012-03-20 17:18:11 -04:00
# define CP_QUEUE_THRESHOLDS 0x8760
# define ROQ_IB1_START(x) ((x) << 0)
# define ROQ_IB2_START(x) ((x) << 8)
# define CP_MEQ_THRESHOLDS 0x8764
# define MEQ1_START(x) ((x) << 0)
# define MEQ2_START(x) ((x) << 8)
# define CP_PERFMON_CNTL 0x87FC
2012-03-20 17:18:15 -04:00
# define VGT_VTX_VECT_EJECT_REG 0x88B0
2012-03-20 17:18:11 -04:00
# define VGT_CACHE_INVALIDATION 0x88C4
# define CACHE_INVALIDATION(x) ((x) << 0)
# define VC_ONLY 0
# define TC_ONLY 1
# define VC_AND_TC 2
# define AUTO_INVLD_EN(x) ((x) << 6)
# define NO_AUTO 0
# define ES_AUTO 1
# define GS_AUTO 2
# define ES_AND_GS_AUTO 3
2012-03-20 17:18:15 -04:00
# define VGT_ESGS_RING_SIZE 0x88C8
# define VGT_GSVS_RING_SIZE 0x88CC
2012-03-20 17:18:11 -04:00
# define VGT_GS_VERTEX_REUSE 0x88D4
2012-03-20 17:18:15 -04:00
# define VGT_PRIMITIVE_TYPE 0x8958
# define VGT_INDEX_TYPE 0x895C
# define VGT_NUM_INDICES 0x8970
2012-03-20 17:18:11 -04:00
# define VGT_NUM_INSTANCES 0x8974
2012-03-20 17:18:15 -04:00
# define VGT_TF_RING_SIZE 0x8988
# define VGT_HS_OFFCHIP_PARAM 0x89B0
# define VGT_TF_MEMORY_BASE 0x89B8
2012-03-20 17:18:11 -04:00
# define CC_GC_SHADER_ARRAY_CONFIG 0x89bc
2012-06-01 18:58:22 -04:00
# define INACTIVE_CUS_MASK 0xFFFF0000
# define INACTIVE_CUS_SHIFT 16
2012-03-20 17:18:11 -04:00
# define GC_USER_SHADER_ARRAY_CONFIG 0x89c0
# define PA_CL_ENHANCE 0x8A14
# define CLIP_VTX_REORDER_ENA (1 << 0)
# define NUM_CLIP_SEQ(x) ((x) << 1)
2012-03-20 17:18:15 -04:00
# define PA_SU_LINE_STIPPLE_VALUE 0x8A60
2012-03-20 17:18:11 -04:00
# define PA_SC_LINE_STIPPLE_STATE 0x8B10
# define PA_SC_FORCE_EOV_MAX_CNTS 0x8B24
# define FORCE_EOV_MAX_CLK_CNT(x) ((x) << 0)
# define FORCE_EOV_MAX_REZ_CNT(x) ((x) << 16)
# define PA_SC_FIFO_SIZE 0x8BCC
# define SC_FRONTEND_PRIM_FIFO_SIZE(x) ((x) << 0)
# define SC_BACKEND_PRIM_FIFO_SIZE(x) ((x) << 6)
# define SC_HIZ_TILE_FIFO_SIZE(x) ((x) << 15)
# define SC_EARLYZ_TILE_FIFO_SIZE(x) ((x) << 23)
2012-03-20 17:18:15 -04:00
# define PA_SC_ENHANCE 0x8BF0
2012-03-20 17:18:11 -04:00
# define SQ_CONFIG 0x8C00
2012-03-20 17:18:15 -04:00
# define SQC_CACHES 0x8C08
2013-06-25 17:56:16 -04:00
# define SQ_POWER_THROTTLE 0x8e58
# define MIN_POWER(x) ((x) << 0)
# define MIN_POWER_MASK (0x3fff << 0)
# define MIN_POWER_SHIFT 0
# define MAX_POWER(x) ((x) << 16)
# define MAX_POWER_MASK (0x3fff << 16)
# define MAX_POWER_SHIFT 0
# define SQ_POWER_THROTTLE2 0x8e5c
# define MAX_POWER_DELTA(x) ((x) << 0)
# define MAX_POWER_DELTA_MASK (0x3fff << 0)
# define MAX_POWER_DELTA_SHIFT 0
# define STI_SIZE(x) ((x) << 16)
# define STI_SIZE_MASK (0x3ff << 16)
# define STI_SIZE_SHIFT 16
# define LTI_RATIO(x) ((x) << 27)
# define LTI_RATIO_MASK (0xf << 27)
# define LTI_RATIO_SHIFT 27
2012-03-20 17:18:11 -04:00
# define SX_DEBUG_1 0x9060
2012-03-20 17:18:15 -04:00
# define SPI_STATIC_THREAD_MGMT_1 0x90E0
# define SPI_STATIC_THREAD_MGMT_2 0x90E4
# define SPI_STATIC_THREAD_MGMT_3 0x90E8
# define SPI_PS_MAX_WAVE_ID 0x90EC
# define SPI_CONFIG_CNTL 0x9100
2012-03-20 17:18:11 -04:00
# define SPI_CONFIG_CNTL_1 0x913C
# define VTX_DONE_DELAY(x) ((x) << 0)
# define INTERP_ONE_PRIM_PER_ROW (1 << 4)
# define CGTS_TCC_DISABLE 0x9148
# define CGTS_USER_TCC_DISABLE 0x914C
# define TCC_DISABLE_MASK 0xFFFF0000
# define TCC_DISABLE_SHIFT 16
2013-03-07 12:56:35 -05:00
# define CGTS_SM_CTRL_REG 0x9150
# define OVERRIDE (1 << 21)
# define LS_OVERRIDE (1 << 22)
2012-03-20 17:18:11 -04:00
2013-02-15 16:49:59 -05:00
# define SPI_LB_CU_MASK 0x9354
2012-03-20 17:18:15 -04:00
# define TA_CNTL_AUX 0x9508
2016-10-10 13:23:25 +02:00
# define TA_CS_BC_BASE_ADDR 0x950C
2012-03-20 17:18:15 -04:00
2012-03-20 17:18:11 -04:00
# define CC_RB_BACKEND_DISABLE 0x98F4
# define BACKEND_DISABLE(x) ((x) << 16)
# define GB_ADDR_CONFIG 0x98F8
# define NUM_PIPES(x) ((x) << 0)
# define NUM_PIPES_MASK 0x00000007
# define NUM_PIPES_SHIFT 0
# define PIPE_INTERLEAVE_SIZE(x) ((x) << 4)
# define PIPE_INTERLEAVE_SIZE_MASK 0x00000070
# define PIPE_INTERLEAVE_SIZE_SHIFT 4
# define NUM_SHADER_ENGINES(x) ((x) << 12)
# define NUM_SHADER_ENGINES_MASK 0x00003000
# define NUM_SHADER_ENGINES_SHIFT 12
# define SHADER_ENGINE_TILE_SIZE(x) ((x) << 16)
# define SHADER_ENGINE_TILE_SIZE_MASK 0x00070000
# define SHADER_ENGINE_TILE_SIZE_SHIFT 16
# define NUM_GPUS(x) ((x) << 20)
# define NUM_GPUS_MASK 0x00700000
# define NUM_GPUS_SHIFT 20
# define MULTI_GPU_TILE_SIZE(x) ((x) << 24)
# define MULTI_GPU_TILE_SIZE_MASK 0x03000000
# define MULTI_GPU_TILE_SIZE_SHIFT 24
# define ROW_SIZE(x) ((x) << 28)
# define ROW_SIZE_MASK 0x30000000
# define ROW_SIZE_SHIFT 28
# define GB_TILE_MODE0 0x9910
# define MICRO_TILE_MODE(x) ((x) << 0)
# define ADDR_SURF_DISPLAY_MICRO_TILING 0
# define ADDR_SURF_THIN_MICRO_TILING 1
# define ADDR_SURF_DEPTH_MICRO_TILING 2
# define ARRAY_MODE(x) ((x) << 2)
# define ARRAY_LINEAR_GENERAL 0
# define ARRAY_LINEAR_ALIGNED 1
# define ARRAY_1D_TILED_THIN1 2
# define ARRAY_2D_TILED_THIN1 4
# define PIPE_CONFIG(x) ((x) << 6)
# define ADDR_SURF_P2 0
# define ADDR_SURF_P4_8x16 4
# define ADDR_SURF_P4_16x16 5
# define ADDR_SURF_P4_16x32 6
# define ADDR_SURF_P4_32x32 7
# define ADDR_SURF_P8_16x16_8x16 8
# define ADDR_SURF_P8_16x32_8x16 9
# define ADDR_SURF_P8_32x32_8x16 10
# define ADDR_SURF_P8_16x32_16x16 11
# define ADDR_SURF_P8_32x32_16x16 12
# define ADDR_SURF_P8_32x32_16x32 13
# define ADDR_SURF_P8_32x64_32x32 14
# define TILE_SPLIT(x) ((x) << 11)
# define ADDR_SURF_TILE_SPLIT_64B 0
# define ADDR_SURF_TILE_SPLIT_128B 1
# define ADDR_SURF_TILE_SPLIT_256B 2
# define ADDR_SURF_TILE_SPLIT_512B 3
# define ADDR_SURF_TILE_SPLIT_1KB 4
# define ADDR_SURF_TILE_SPLIT_2KB 5
# define ADDR_SURF_TILE_SPLIT_4KB 6
# define BANK_WIDTH(x) ((x) << 14)
# define ADDR_SURF_BANK_WIDTH_1 0
# define ADDR_SURF_BANK_WIDTH_2 1
# define ADDR_SURF_BANK_WIDTH_4 2
# define ADDR_SURF_BANK_WIDTH_8 3
# define BANK_HEIGHT(x) ((x) << 16)
# define ADDR_SURF_BANK_HEIGHT_1 0
# define ADDR_SURF_BANK_HEIGHT_2 1
# define ADDR_SURF_BANK_HEIGHT_4 2
# define ADDR_SURF_BANK_HEIGHT_8 3
# define MACRO_TILE_ASPECT(x) ((x) << 18)
# define ADDR_SURF_MACRO_ASPECT_1 0
# define ADDR_SURF_MACRO_ASPECT_2 1
# define ADDR_SURF_MACRO_ASPECT_4 2
# define ADDR_SURF_MACRO_ASPECT_8 3
# define NUM_BANKS(x) ((x) << 20)
# define ADDR_SURF_2_BANK 0
# define ADDR_SURF_4_BANK 1
# define ADDR_SURF_8_BANK 2
# define ADDR_SURF_16_BANK 3
# define CB_PERFCOUNTER0_SELECT0 0x9a20
# define CB_PERFCOUNTER0_SELECT1 0x9a24
# define CB_PERFCOUNTER1_SELECT0 0x9a28
# define CB_PERFCOUNTER1_SELECT1 0x9a2c
# define CB_PERFCOUNTER2_SELECT0 0x9a30
# define CB_PERFCOUNTER2_SELECT1 0x9a34
# define CB_PERFCOUNTER3_SELECT0 0x9a38
# define CB_PERFCOUNTER3_SELECT1 0x9a3c
2013-03-07 12:56:35 -05:00
# define CB_CGTT_SCLK_CTRL 0x9a60
2012-03-20 17:18:11 -04:00
# define GC_USER_RB_BACKEND_DISABLE 0x9B7C
# define BACKEND_DISABLE_MASK 0x00FF0000
# define BACKEND_DISABLE_SHIFT 16
# define TCP_CHAN_STEER_LO 0xac0c
# define TCP_CHAN_STEER_HI 0xac10
2012-03-20 17:18:19 -04:00
# define CP_RB0_BASE 0xC100
# define CP_RB0_CNTL 0xC104
# define RB_BUFSZ(x) ((x) << 0)
# define RB_BLKSZ(x) ((x) << 8)
# define BUF_SWAP_32BIT (2 << 16)
# define RB_NO_UPDATE (1 << 27)
# define RB_RPTR_WR_ENA (1 << 31)
# define CP_RB0_RPTR_ADDR 0xC10C
# define CP_RB0_RPTR_ADDR_HI 0xC110
# define CP_RB0_WPTR 0xC114
# define CP_PFP_UCODE_ADDR 0xC150
# define CP_PFP_UCODE_DATA 0xC154
# define CP_ME_RAM_RADDR 0xC158
# define CP_ME_RAM_WADDR 0xC15C
# define CP_ME_RAM_DATA 0xC160
# define CP_CE_UCODE_ADDR 0xC168
# define CP_CE_UCODE_DATA 0xC16C
# define CP_RB1_BASE 0xC180
# define CP_RB1_CNTL 0xC184
# define CP_RB1_RPTR_ADDR 0xC188
# define CP_RB1_RPTR_ADDR_HI 0xC18C
# define CP_RB1_WPTR 0xC190
# define CP_RB2_BASE 0xC194
# define CP_RB2_CNTL 0xC198
# define CP_RB2_RPTR_ADDR 0xC19C
# define CP_RB2_RPTR_ADDR_HI 0xC1A0
# define CP_RB2_WPTR 0xC1A4
2012-03-20 17:18:22 -04:00
# define CP_INT_CNTL_RING0 0xC1A8
# define CP_INT_CNTL_RING1 0xC1AC
# define CP_INT_CNTL_RING2 0xC1B0
# define CNTX_BUSY_INT_ENABLE (1 << 19)
# define CNTX_EMPTY_INT_ENABLE (1 << 20)
# define WAIT_MEM_SEM_INT_ENABLE (1 << 21)
# define TIME_STAMP_INT_ENABLE (1 << 26)
# define CP_RINGID2_INT_ENABLE (1 << 29)
# define CP_RINGID1_INT_ENABLE (1 << 30)
# define CP_RINGID0_INT_ENABLE (1 << 31)
# define CP_INT_STATUS_RING0 0xC1B4
# define CP_INT_STATUS_RING1 0xC1B8
# define CP_INT_STATUS_RING2 0xC1BC
# define WAIT_MEM_SEM_INT_STAT (1 << 21)
# define TIME_STAMP_INT_STAT (1 << 26)
# define CP_RINGID2_INT_STAT (1 << 29)
# define CP_RINGID1_INT_STAT (1 << 30)
# define CP_RINGID0_INT_STAT (1 << 31)
2012-03-20 17:18:19 -04:00
2013-03-07 12:56:35 -05:00
# define CP_MEM_SLP_CNTL 0xC1E4
# define CP_MEM_LS_EN (1 << 0)
2012-03-20 17:18:19 -04:00
# define CP_DEBUG 0xC1FC
2012-03-20 17:18:21 -04:00
# define RLC_CNTL 0xC300
# define RLC_ENABLE (1 << 0)
# define RLC_RL_BASE 0xC304
# define RLC_RL_SIZE 0xC308
# define RLC_LB_CNTL 0xC30C
2013-02-15 16:49:59 -05:00
# define LOAD_BALANCE_ENABLE (1 << 0)
2012-03-20 17:18:21 -04:00
# define RLC_SAVE_AND_RESTORE_BASE 0xC310
# define RLC_LB_CNTR_MAX 0xC314
# define RLC_LB_CNTR_INIT 0xC318
# define RLC_CLEAR_STATE_RESTORE_BASE 0xC320
# define RLC_UCODE_ADDR 0xC32C
# define RLC_UCODE_DATA 0xC330
2012-08-09 16:34:17 +02:00
# define RLC_GPU_CLOCK_COUNT_LSB 0xC338
# define RLC_GPU_CLOCK_COUNT_MSB 0xC33C
# define RLC_CAPTURE_GPU_CLOCK_COUNT 0xC340
2012-03-20 17:18:21 -04:00
# define RLC_MC_CNTL 0xC344
# define RLC_UCODE_CNTL 0xC348
2013-02-15 16:49:59 -05:00
# define RLC_STAT 0xC34C
# define RLC_BUSY_STATUS (1 << 0)
# define GFX_POWER_STATUS (1 << 1)
# define GFX_CLOCK_STATUS (1 << 2)
# define GFX_LS_STATUS (1 << 3)
2013-03-07 12:56:35 -05:00
# define RLC_PG_CNTL 0xC35C
# define GFX_PG_ENABLE (1 << 0)
# define GFX_PG_SRC (1 << 1)
# define RLC_CGTT_MGCG_OVERRIDE 0xC400
# define RLC_CGCG_CGLS_CTRL 0xC404
# define CGCG_EN (1 << 0)
# define CGLS_EN (1 << 1)
# define RLC_TTOP_D 0xC414
# define RLC_PUD(x) ((x) << 0)
# define RLC_PUD_MASK (0xff << 0)
# define RLC_PDD(x) ((x) << 8)
# define RLC_PDD_MASK (0xff << 8)
# define RLC_TTPD(x) ((x) << 16)
# define RLC_TTPD_MASK (0xff << 16)
# define RLC_MSD(x) ((x) << 24)
# define RLC_MSD_MASK (0xff << 24)
2013-02-15 16:49:59 -05:00
# define RLC_LB_INIT_CU_MASK 0xC41C
2013-03-07 12:56:35 -05:00
# define RLC_PG_AO_CU_MASK 0xC42C
# define RLC_MAX_PG_CU 0xC430
# define MAX_PU_CU(x) ((x) << 0)
# define MAX_PU_CU_MASK (0xff << 0)
# define RLC_AUTO_PG_CTRL 0xC434
# define AUTO_PG_EN (1 << 0)
# define GRBM_REG_SGIT(x) ((x) << 3)
# define GRBM_REG_SGIT_MASK (0xffff << 3)
# define PG_AFTER_GRBM_REG_ST(x) ((x) << 19)
# define PG_AFTER_GRBM_REG_ST_MASK (0x1fff << 19)
# define RLC_SERDES_WR_MASTER_MASK_0 0xC454
# define RLC_SERDES_WR_MASTER_MASK_1 0xC458
# define RLC_SERDES_WR_CTRL 0xC45C
2013-02-15 16:49:59 -05:00
# define RLC_SERDES_MASTER_BUSY_0 0xC464
# define RLC_SERDES_MASTER_BUSY_1 0xC468
2013-03-07 12:56:35 -05:00
# define RLC_GCPM_GENERAL_3 0xC478
# define DB_RENDER_CONTROL 0x28000
2013-02-15 16:49:59 -05:00
# define DB_DEPTH_INFO 0x2803c
2012-03-20 17:18:21 -04:00
2012-06-01 18:58:22 -04:00
# define PA_SC_RASTER_CONFIG 0x28350
# define RASTER_CONFIG_RB_MAP_0 0
# define RASTER_CONFIG_RB_MAP_1 1
# define RASTER_CONFIG_RB_MAP_2 2
# define RASTER_CONFIG_RB_MAP_3 3
2012-03-20 17:18:20 -04:00
# define VGT_EVENT_INITIATOR 0x28a90
# define SAMPLE_STREAMOUTSTATS1 (1 << 0)
# define SAMPLE_STREAMOUTSTATS2 (2 << 0)
# define SAMPLE_STREAMOUTSTATS3 (3 << 0)
# define CACHE_FLUSH_TS (4 << 0)
# define CACHE_FLUSH (6 << 0)
# define CS_PARTIAL_FLUSH (7 << 0)
# define VGT_STREAMOUT_RESET (10 << 0)
# define END_OF_PIPE_INCR_DE (11 << 0)
# define END_OF_PIPE_IB_END (12 << 0)
# define RST_PIX_CNT (13 << 0)
# define VS_PARTIAL_FLUSH (15 << 0)
# define PS_PARTIAL_FLUSH (16 << 0)
# define CACHE_FLUSH_AND_INV_TS_EVENT (20 << 0)
# define ZPASS_DONE (21 << 0)
# define CACHE_FLUSH_AND_INV_EVENT (22 << 0)
# define PERFCOUNTER_START (23 << 0)
# define PERFCOUNTER_STOP (24 << 0)
# define PIPELINESTAT_START (25 << 0)
# define PIPELINESTAT_STOP (26 << 0)
# define PERFCOUNTER_SAMPLE (27 << 0)
# define SAMPLE_PIPELINESTAT (30 << 0)
# define SAMPLE_STREAMOUTSTATS (32 << 0)
# define RESET_VTX_CNT (33 << 0)
# define VGT_FLUSH (36 << 0)
# define BOTTOM_OF_PIPE_TS (40 << 0)
# define DB_CACHE_FLUSH_AND_INV (42 << 0)
# define FLUSH_AND_INV_DB_DATA_TS (43 << 0)
# define FLUSH_AND_INV_DB_META (44 << 0)
# define FLUSH_AND_INV_CB_DATA_TS (45 << 0)
# define FLUSH_AND_INV_CB_META (46 << 0)
# define CS_DONE (47 << 0)
# define PS_DONE (48 << 0)
# define FLUSH_AND_INV_CB_PIXEL_DATA (49 << 0)
# define THREAD_TRACE_START (51 << 0)
# define THREAD_TRACE_STOP (52 << 0)
# define THREAD_TRACE_FLUSH (54 << 0)
# define THREAD_TRACE_FINISH (55 << 0)
2013-02-15 11:56:59 -05:00
/* PIF PHY0 registers idx/data 0x8/0xc */
# define PB0_PIF_CNTL 0x10
# define LS2_EXIT_TIME(x) ((x) << 17)
# define LS2_EXIT_TIME_MASK (0x7 << 17)
# define LS2_EXIT_TIME_SHIFT 17
# define PB0_PIF_PAIRING 0x11
# define MULTI_PIF (1 << 25)
# define PB0_PIF_PWRDOWN_0 0x12
# define PLL_POWER_STATE_IN_TXS2_0(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_0_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_0_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_0(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_0_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_0_SHIFT 10
# define PLL_RAMP_UP_TIME_0(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_0_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_0_SHIFT 24
# define PB0_PIF_PWRDOWN_1 0x13
# define PLL_POWER_STATE_IN_TXS2_1(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_1_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_1_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_1(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_1_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_1_SHIFT 10
# define PLL_RAMP_UP_TIME_1(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_1_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_1_SHIFT 24
# define PB0_PIF_PWRDOWN_2 0x17
# define PLL_POWER_STATE_IN_TXS2_2(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_2_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_2_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_2(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_2_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_2_SHIFT 10
# define PLL_RAMP_UP_TIME_2(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_2_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_2_SHIFT 24
# define PB0_PIF_PWRDOWN_3 0x18
# define PLL_POWER_STATE_IN_TXS2_3(x) ((x) << 7)
# define PLL_POWER_STATE_IN_TXS2_3_MASK (0x7 << 7)
# define PLL_POWER_STATE_IN_TXS2_3_SHIFT 7
# define PLL_POWER_STATE_IN_OFF_3(x) ((x) << 10)
# define PLL_POWER_STATE_IN_OFF_3_MASK (0x7 << 10)
# define PLL_POWER_STATE_IN_OFF_3_SHIFT 10
# define PLL_RAMP_UP_TIME_3(x) ((x) << 24)
# define PLL_RAMP_UP_TIME_3_MASK (0x7 << 24)
# define PLL_RAMP_UP_TIME_3_SHIFT 24
/* PIF PHY1 registers idx/data 0x10/0x14 */
# define PB1_PIF_CNTL 0x10
# define PB1_PIF_PAIRING 0x11
# define PB1_PIF_PWRDOWN_0 0x12
# define PB1_PIF_PWRDOWN_1 0x13
# define PB1_PIF_PWRDOWN_2 0x17
# define PB1_PIF_PWRDOWN_3 0x18
2013-02-14 17:16:51 -05:00
/* PCIE registers idx/data 0x30/0x34 */
2013-02-15 11:56:59 -05:00
# define PCIE_CNTL2 0x1c /* PCIE */
# define SLV_MEM_LS_EN (1 << 16)
2013-08-08 19:34:07 -04:00
# define SLV_MEM_AGGRESSIVE_LS_EN (1 << 17)
2013-02-15 11:56:59 -05:00
# define MST_MEM_LS_EN (1 << 18)
# define REPLAY_MEM_LS_EN (1 << 19)
2013-02-14 17:16:51 -05:00
# define PCIE_LC_STATUS1 0x28 /* PCIE */
2013-02-15 11:56:59 -05:00
# define LC_REVERSE_RCVR (1 << 0)
# define LC_REVERSE_XMIT (1 << 1)
2013-02-14 17:16:51 -05:00
# define LC_OPERATING_LINK_WIDTH_MASK (0x7 << 2)
# define LC_OPERATING_LINK_WIDTH_SHIFT 2
# define LC_DETECTED_LINK_WIDTH_MASK (0x7 << 5)
# define LC_DETECTED_LINK_WIDTH_SHIFT 5
2013-02-15 11:56:59 -05:00
# define PCIE_P_CNTL 0x40 /* PCIE */
# define P_IGNORE_EDB_ERR (1 << 6)
2013-02-14 17:16:51 -05:00
/* PCIE PORT registers idx/data 0x38/0x3c */
2013-02-15 11:56:59 -05:00
# define PCIE_LC_CNTL 0xa0
# define LC_L0S_INACTIVITY(x) ((x) << 8)
# define LC_L0S_INACTIVITY_MASK (0xf << 8)
# define LC_L0S_INACTIVITY_SHIFT 8
# define LC_L1_INACTIVITY(x) ((x) << 12)
# define LC_L1_INACTIVITY_MASK (0xf << 12)
# define LC_L1_INACTIVITY_SHIFT 12
# define LC_PMI_TO_L1_DIS (1 << 16)
# define LC_ASPM_TO_L1_DIS (1 << 24)
2013-02-14 17:16:51 -05:00
# define PCIE_LC_LINK_WIDTH_CNTL 0xa2 /* PCIE_P */
# define LC_LINK_WIDTH_SHIFT 0
# define LC_LINK_WIDTH_MASK 0x7
# define LC_LINK_WIDTH_X0 0
# define LC_LINK_WIDTH_X1 1
# define LC_LINK_WIDTH_X2 2
# define LC_LINK_WIDTH_X4 3
# define LC_LINK_WIDTH_X8 4
# define LC_LINK_WIDTH_X16 6
# define LC_LINK_WIDTH_RD_SHIFT 4
# define LC_LINK_WIDTH_RD_MASK 0x70
# define LC_RECONFIG_ARC_MISSING_ESCAPE (1 << 7)
# define LC_RECONFIG_NOW (1 << 8)
# define LC_RENEGOTIATION_SUPPORT (1 << 9)
# define LC_RENEGOTIATE_EN (1 << 10)
# define LC_SHORT_RECONFIG_EN (1 << 11)
# define LC_UPCONFIGURE_SUPPORT (1 << 12)
# define LC_UPCONFIGURE_DIS (1 << 13)
2013-02-15 11:56:59 -05:00
# define LC_DYN_LANES_PWR_STATE(x) ((x) << 21)
# define LC_DYN_LANES_PWR_STATE_MASK (0x3 << 21)
# define LC_DYN_LANES_PWR_STATE_SHIFT 21
# define PCIE_LC_N_FTS_CNTL 0xa3 /* PCIE_P */
# define LC_XMIT_N_FTS(x) ((x) << 0)
# define LC_XMIT_N_FTS_MASK (0xff << 0)
# define LC_XMIT_N_FTS_SHIFT 0
# define LC_XMIT_N_FTS_OVERRIDE_EN (1 << 8)
# define LC_N_FTS_MASK (0xff << 24)
2013-02-14 17:16:51 -05:00
# define PCIE_LC_SPEED_CNTL 0xa4 /* PCIE_P */
# define LC_GEN2_EN_STRAP (1 << 0)
# define LC_GEN3_EN_STRAP (1 << 1)
# define LC_TARGET_LINK_SPEED_OVERRIDE_EN (1 << 2)
# define LC_TARGET_LINK_SPEED_OVERRIDE_MASK (0x3 << 3)
# define LC_TARGET_LINK_SPEED_OVERRIDE_SHIFT 3
# define LC_FORCE_EN_SW_SPEED_CHANGE (1 << 5)
# define LC_FORCE_DIS_SW_SPEED_CHANGE (1 << 6)
# define LC_FORCE_EN_HW_SPEED_CHANGE (1 << 7)
# define LC_FORCE_DIS_HW_SPEED_CHANGE (1 << 8)
# define LC_INITIATE_LINK_SPEED_CHANGE (1 << 9)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_MASK (0x3 << 10)
# define LC_SPEED_CHANGE_ATTEMPTS_ALLOWED_SHIFT 10
# define LC_CURRENT_DATA_RATE_MASK (0x3 << 13) /* 0/1/2 = gen1/2/3 */
# define LC_CURRENT_DATA_RATE_SHIFT 13
# define LC_CLR_FAILED_SPD_CHANGE_CNT (1 << 16)
# define LC_OTHER_SIDE_EVER_SENT_GEN2 (1 << 18)
# define LC_OTHER_SIDE_SUPPORTS_GEN2 (1 << 19)
# define LC_OTHER_SIDE_EVER_SENT_GEN3 (1 << 20)
# define LC_OTHER_SIDE_SUPPORTS_GEN3 (1 << 21)
2013-02-15 11:56:59 -05:00
# define PCIE_LC_CNTL2 0xb1
# define LC_ALLOW_PDWN_IN_L1 (1 << 17)
# define LC_ALLOW_PDWN_IN_L23 (1 << 18)
# define PCIE_LC_CNTL3 0xb5 /* PCIE_P */
# define LC_GO_TO_RECOVERY (1 << 30)
2013-02-14 17:16:51 -05:00
# define PCIE_LC_CNTL4 0xb6 /* PCIE_P */
# define LC_REDO_EQ (1 << 5)
# define LC_SET_QUIESCE (1 << 13)
2013-04-08 12:41:29 +02:00
/*
* UVD
*/
2013-04-08 12:41:37 +02:00
# define UVD_UDEC_ADDR_CONFIG 0xEF4C
# define UVD_UDEC_DB_ADDR_CONFIG 0xEF50
# define UVD_UDEC_DBW_ADDR_CONFIG 0xEF54
2016-08-23 10:07:28 -04:00
# define UVD_NO_OP 0xEFFC
2013-04-08 12:41:29 +02:00
# define UVD_RBC_RB_RPTR 0xF690
# define UVD_RBC_RB_WPTR 0xF694
2014-10-01 10:03:31 -04:00
# define UVD_STATUS 0xf6bc
2013-04-08 12:41:29 +02:00
2013-03-07 12:56:35 -05:00
# define UVD_CGC_CTRL 0xF4B0
# define DCM (1 << 0)
# define CG_DT(x) ((x) << 2)
# define CG_DT_MASK (0xf << 2)
# define CLK_OD(x) ((x) << 6)
# define CLK_OD_MASK (0x1f << 6)
/* UVD CTX indirect */
# define UVD_CGC_MEM_CTRL 0xC0
# define UVD_CGC_CTRL2 0xC1
# define DYN_OR_EN (1 << 0)
# define DYN_RR_EN (1 << 1)
# define G_DIV_ID(x) ((x) << 2)
# define G_DIV_ID_MASK (0x7 << 2)
2012-03-20 17:18:13 -04:00
/*
* PM4
*/
2013-01-02 18:27:48 -05:00
# define PACKET0(reg, n) ((RADEON_PACKET_TYPE0 << 30) | \
2012-03-20 17:18:13 -04:00
( ( ( reg ) > > 2 ) & 0xFFFF ) | \
( ( n ) & 0x3FFF ) < < 16 )
# define CP_PACKET2 0x80000000
# define PACKET2_PAD_SHIFT 0
# define PACKET2_PAD_MASK (0x3fffffff << 0)
# define PACKET2(v) (CP_PACKET2 | REG_SET(PACKET2_PAD, (v)))
2013-01-02 18:27:48 -05:00
# define PACKET3(op, n) ((RADEON_PACKET_TYPE3 << 30) | \
2012-03-20 17:18:13 -04:00
( ( ( op ) & 0xFF ) < < 8 ) | \
( ( n ) & 0x3FFF ) < < 16 )
2012-03-20 17:18:19 -04:00
# define PACKET3_COMPUTE(op, n) (PACKET3(op, n) | 1 << 1)
2012-03-20 17:18:13 -04:00
/* Packet 3 types */
# define PACKET3_NOP 0x10
# define PACKET3_SET_BASE 0x11
# define PACKET3_BASE_INDEX(x) ((x) << 0)
# define GDS_PARTITION_BASE 2
# define CE_PARTITION_BASE 3
# define PACKET3_CLEAR_STATE 0x12
# define PACKET3_INDEX_BUFFER_SIZE 0x13
# define PACKET3_DISPATCH_DIRECT 0x15
# define PACKET3_DISPATCH_INDIRECT 0x16
# define PACKET3_ALLOC_GDS 0x1B
# define PACKET3_WRITE_GDS_RAM 0x1C
# define PACKET3_ATOMIC_GDS 0x1D
# define PACKET3_ATOMIC 0x1E
# define PACKET3_OCCLUSION_QUERY 0x1F
# define PACKET3_SET_PREDICATION 0x20
# define PACKET3_REG_RMW 0x21
# define PACKET3_COND_EXEC 0x22
# define PACKET3_PRED_EXEC 0x23
# define PACKET3_DRAW_INDIRECT 0x24
# define PACKET3_DRAW_INDEX_INDIRECT 0x25
# define PACKET3_INDEX_BASE 0x26
# define PACKET3_DRAW_INDEX_2 0x27
# define PACKET3_CONTEXT_CONTROL 0x28
# define PACKET3_INDEX_TYPE 0x2A
# define PACKET3_DRAW_INDIRECT_MULTI 0x2C
# define PACKET3_DRAW_INDEX_AUTO 0x2D
# define PACKET3_DRAW_INDEX_IMMD 0x2E
# define PACKET3_NUM_INSTANCES 0x2F
# define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30
# define PACKET3_INDIRECT_BUFFER_CONST 0x31
# define PACKET3_INDIRECT_BUFFER 0x32
# define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
# define PACKET3_DRAW_INDEX_OFFSET_2 0x35
# define PACKET3_DRAW_INDEX_MULTI_ELEMENT 0x36
# define PACKET3_WRITE_DATA 0x37
2012-10-02 14:39:18 -04:00
# define WRITE_DATA_DST_SEL(x) ((x) << 8)
/* 0 - register
* 1 - memory ( sync - via GRBM )
* 2 - tc / l2
* 3 - gds
* 4 - reserved
* 5 - memory ( async - direct )
*/
# define WR_ONE_ADDR (1 << 16)
# define WR_CONFIRM (1 << 20)
# define WRITE_DATA_ENGINE_SEL(x) ((x) << 30)
/* 0 - me
* 1 - pfp
* 2 - ce
*/
2012-03-20 17:18:13 -04:00
# define PACKET3_DRAW_INDEX_INDIRECT_MULTI 0x38
# define PACKET3_MEM_SEMAPHORE 0x39
# define PACKET3_MPEG_INDEX 0x3A
# define PACKET3_COPY_DW 0x3B
# define PACKET3_WAIT_REG_MEM 0x3C
2015-01-05 19:54:50 -05:00
# define WAIT_REG_MEM_FUNCTION(x) ((x) << 0)
/* 0 - always
* 1 - <
* 2 - < =
* 3 - = =
* 4 - ! =
* 5 - > =
* 6 - >
*/
# define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4)
/* 0 - reg
* 1 - mem
*/
# define WAIT_REG_MEM_ENGINE(x) ((x) << 8)
/* 0 - me
* 1 - pfp
*/
2012-03-20 17:18:13 -04:00
# define PACKET3_MEM_WRITE 0x3D
# define PACKET3_COPY_DATA 0x40
2012-12-03 18:07:25 -05:00
# define PACKET3_CP_DMA 0x41
/* 1. header
* 2. SRC_ADDR_LO or DATA [ 31 : 0 ]
* 3. CP_SYNC [ 31 ] | SRC_SEL [ 30 : 29 ] | ENGINE [ 27 ] | DST_SEL [ 21 : 20 ] |
* SRC_ADDR_HI [ 7 : 0 ]
* 4. DST_ADDR_LO [ 31 : 0 ]
* 5. DST_ADDR_HI [ 7 : 0 ]
* 6. COMMAND [ 30 : 21 ] | BYTE_COUNT [ 20 : 0 ]
*/
# define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20)
2013-10-01 16:40:45 -04:00
/* 0 - DST_ADDR
2012-12-03 18:07:25 -05:00
* 1 - GDS
*/
# define PACKET3_CP_DMA_ENGINE(x) ((x) << 27)
/* 0 - ME
* 1 - PFP
*/
# define PACKET3_CP_DMA_SRC_SEL(x) ((x) << 29)
/* 0 - SRC_ADDR
* 1 - GDS
* 2 - DATA
*/
# define PACKET3_CP_DMA_CP_SYNC (1 << 31)
/* COMMAND */
# define PACKET3_CP_DMA_DIS_WC (1 << 21)
2013-10-01 16:40:45 -04:00
# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22)
2012-12-03 18:07:25 -05:00
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_CP_DMA_CMD_DST_SWAP(x) ((x) << 24)
/* 0 - none
* 1 - 8 in 16
* 2 - 8 in 32
* 3 - 8 in 64
*/
# define PACKET3_CP_DMA_CMD_SAS (1 << 26)
/* 0 - memory
* 1 - register
*/
# define PACKET3_CP_DMA_CMD_DAS (1 << 27)
/* 0 - memory
* 1 - register
*/
# define PACKET3_CP_DMA_CMD_SAIC (1 << 28)
# define PACKET3_CP_DMA_CMD_DAIC (1 << 29)
# define PACKET3_CP_DMA_CMD_RAW_WAIT (1 << 30)
2012-03-20 17:18:13 -04:00
# define PACKET3_PFP_SYNC_ME 0x42
# define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_DEST_BASE_0_ENA (1 << 0)
# define PACKET3_DEST_BASE_1_ENA (1 << 1)
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
# define PACKET3_CB2_DEST_BASE_ENA (1 << 8)
# define PACKET3_CB3_DEST_BASE_ENA (1 << 9)
# define PACKET3_CB4_DEST_BASE_ENA (1 << 10)
# define PACKET3_CB5_DEST_BASE_ENA (1 << 11)
# define PACKET3_CB6_DEST_BASE_ENA (1 << 12)
# define PACKET3_CB7_DEST_BASE_ENA (1 << 13)
# define PACKET3_DB_DEST_BASE_ENA (1 << 14)
# define PACKET3_DEST_BASE_2_ENA (1 << 19)
# define PACKET3_DEST_BASE_3_ENA (1 << 21)
# define PACKET3_TCL1_ACTION_ENA (1 << 22)
# define PACKET3_TC_ACTION_ENA (1 << 23)
# define PACKET3_CB_ACTION_ENA (1 << 25)
# define PACKET3_DB_ACTION_ENA (1 << 26)
# define PACKET3_SH_KCACHE_ACTION_ENA (1 << 27)
# define PACKET3_SH_ICACHE_ACTION_ENA (1 << 29)
# define PACKET3_ME_INITIALIZE 0x44
# define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
# define PACKET3_COND_WRITE 0x45
# define PACKET3_EVENT_WRITE 0x46
2012-03-20 17:18:20 -04:00
# define EVENT_TYPE(x) ((x) << 0)
# define EVENT_INDEX(x) ((x) << 8)
/* 0 - any non-TS event
* 1 - ZPASS_DONE
* 2 - SAMPLE_PIPELINESTAT
* 3 - SAMPLE_STREAMOUTSTAT *
* 4 - * S_PARTIAL_FLUSH
* 5 - EOP events
* 6 - EOS events
* 7 - CACHE_FLUSH , CACHE_FLUSH_AND_INV_EVENT
*/
# define INV_L2 (1 << 20)
/* INV TC L2 cache when EVENT_INDEX = 7 */
2012-03-20 17:18:13 -04:00
# define PACKET3_EVENT_WRITE_EOP 0x47
2012-03-20 17:18:20 -04:00
# define DATA_SEL(x) ((x) << 29)
/* 0 - discard
* 1 - send low 32 bit data
* 2 - send 64 bit data
* 3 - send 64 bit counter value
*/
# define INT_SEL(x) ((x) << 24)
/* 0 - none
* 1 - interrupt only ( DATA_SEL = 0 )
* 2 - interrupt when data write is confirmed
*/
2012-03-20 17:18:13 -04:00
# define PACKET3_EVENT_WRITE_EOS 0x48
# define PACKET3_PREAMBLE_CNTL 0x4A
# define PACKET3_PREAMBLE_BEGIN_CLEAR_STATE (2 << 28)
# define PACKET3_PREAMBLE_END_CLEAR_STATE (3 << 28)
# define PACKET3_ONE_REG_WRITE 0x57
# define PACKET3_LOAD_CONFIG_REG 0x5F
# define PACKET3_LOAD_CONTEXT_REG 0x60
# define PACKET3_LOAD_SH_REG 0x61
# define PACKET3_SET_CONFIG_REG 0x68
# define PACKET3_SET_CONFIG_REG_START 0x00008000
# define PACKET3_SET_CONFIG_REG_END 0x0000b000
# define PACKET3_SET_CONTEXT_REG 0x69
# define PACKET3_SET_CONTEXT_REG_START 0x00028000
# define PACKET3_SET_CONTEXT_REG_END 0x00029000
# define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73
# define PACKET3_SET_RESOURCE_INDIRECT 0x74
# define PACKET3_SET_SH_REG 0x76
# define PACKET3_SET_SH_REG_START 0x0000b000
# define PACKET3_SET_SH_REG_END 0x0000c000
# define PACKET3_SET_SH_REG_OFFSET 0x77
# define PACKET3_ME_WRITE 0x7A
# define PACKET3_SCRATCH_RAM_WRITE 0x7D
# define PACKET3_SCRATCH_RAM_READ 0x7E
# define PACKET3_CE_WRITE 0x7F
# define PACKET3_LOAD_CONST_RAM 0x80
# define PACKET3_WRITE_CONST_RAM 0x81
# define PACKET3_WRITE_CONST_RAM_OFFSET 0x82
# define PACKET3_DUMP_CONST_RAM 0x83
# define PACKET3_INCREMENT_CE_COUNTER 0x84
# define PACKET3_INCREMENT_DE_COUNTER 0x85
# define PACKET3_WAIT_ON_CE_COUNTER 0x86
# define PACKET3_WAIT_ON_DE_COUNTER 0x87
# define PACKET3_WAIT_ON_DE_COUNTER_DIFF 0x88
# define PACKET3_SET_CE_DE_COUNTERS 0x89
# define PACKET3_WAIT_ON_AVAIL_BUFFER 0x8A
2012-07-17 14:02:29 -04:00
# define PACKET3_SWITCH_BUFFER 0x8B
2012-03-20 17:18:11 -04:00
2012-12-04 15:28:18 -05:00
/* ASYNC DMA - first instance at 0xd000, second at 0xd800 */
# define DMA0_REGISTER_OFFSET 0x0 /* not a register */
# define DMA1_REGISTER_OFFSET 0x800 /* not a register */
# define DMA_RB_CNTL 0xd000
# define DMA_RB_ENABLE (1 << 0)
# define DMA_RB_SIZE(x) ((x) << 1) /* log2 */
# define DMA_RB_SWAP_ENABLE (1 << 9) /* 8IN32 */
# define DMA_RPTR_WRITEBACK_ENABLE (1 << 12)
# define DMA_RPTR_WRITEBACK_SWAP_ENABLE (1 << 13) /* 8IN32 */
# define DMA_RPTR_WRITEBACK_TIMER(x) ((x) << 16) /* log2 */
# define DMA_RB_BASE 0xd004
# define DMA_RB_RPTR 0xd008
# define DMA_RB_WPTR 0xd00c
# define DMA_RB_RPTR_ADDR_HI 0xd01c
# define DMA_RB_RPTR_ADDR_LO 0xd020
# define DMA_IB_CNTL 0xd024
# define DMA_IB_ENABLE (1 << 0)
# define DMA_IB_SWAP_ENABLE (1 << 4)
# define DMA_IB_RPTR 0xd028
# define DMA_CNTL 0xd02c
# define TRAP_ENABLE (1 << 0)
# define SEM_INCOMPLETE_INT_ENABLE (1 << 1)
# define SEM_WAIT_INT_ENABLE (1 << 2)
# define DATA_SWAP_ENABLE (1 << 3)
# define FENCE_SWAP_ENABLE (1 << 4)
# define CTXEMPTY_INT_ENABLE (1 << 28)
2013-01-02 15:12:15 -05:00
# define DMA_STATUS_REG 0xd034
# define DMA_IDLE (1 << 0)
2012-12-04 15:28:18 -05:00
# define DMA_TILING_CONFIG 0xd0b8
2013-08-08 19:34:07 -04:00
# define DMA_POWER_CNTL 0xd0bc
# define MEM_POWER_OVERRIDE (1 << 8)
# define DMA_CLK_CTRL 0xd0c0
2013-03-07 12:56:35 -05:00
# define DMA_PG 0xd0d4
# define PG_CNTL_ENABLE (1 << 0)
# define DMA_PGFSM_CONFIG 0xd0d8
# define DMA_PGFSM_WRITE 0xd0dc
2012-12-04 15:28:18 -05:00
# define DMA_PACKET(cmd, b, t, s, n) ((((cmd) & 0xF) << 28) | \
( ( ( b ) & 0x1 ) < < 26 ) | \
( ( ( t ) & 0x1 ) < < 23 ) | \
( ( ( s ) & 0x1 ) < < 22 ) | \
( ( ( n ) & 0xFFFFF ) < < 0 ) )
2012-10-22 12:32:54 -04:00
# define DMA_IB_PACKET(cmd, vmid, n) ((((cmd) & 0xF) << 28) | \
( ( ( vmid ) & 0xF ) < < 20 ) | \
( ( ( n ) & 0xFFFFF ) < < 0 ) )
# define DMA_PTE_PDE_PACKET(n) ((2 << 28) | \
( 1 < < 26 ) | \
( 1 < < 21 ) | \
( ( ( n ) & 0xFFFFF ) < < 0 ) )
2012-12-04 15:28:18 -05:00
/* async DMA Packet types */
# define DMA_PACKET_WRITE 0x2
# define DMA_PACKET_COPY 0x3
# define DMA_PACKET_INDIRECT_BUFFER 0x4
# define DMA_PACKET_SEMAPHORE 0x5
# define DMA_PACKET_FENCE 0x6
# define DMA_PACKET_TRAP 0x7
# define DMA_PACKET_SRBM_WRITE 0x9
# define DMA_PACKET_CONSTANT_FILL 0xd
2015-01-05 19:54:50 -05:00
# define DMA_PACKET_POLL_REG_MEM 0xe
2012-12-04 15:28:18 -05:00
# define DMA_PACKET_NOP 0xf
2013-05-23 12:10:04 +02:00
# define VCE_STATUS 0x20004
# define VCE_VCPU_CNTL 0x20014
# define VCE_CLK_EN (1 << 0)
# define VCE_VCPU_CACHE_OFFSET0 0x20024
# define VCE_VCPU_CACHE_SIZE0 0x20028
# define VCE_VCPU_CACHE_OFFSET1 0x2002c
# define VCE_VCPU_CACHE_SIZE1 0x20030
# define VCE_VCPU_CACHE_OFFSET2 0x20034
# define VCE_VCPU_CACHE_SIZE2 0x20038
2015-05-11 22:01:53 +02:00
# define VCE_VCPU_SCRATCH7 0x200dc
2013-05-23 12:10:04 +02:00
# define VCE_SOFT_RESET 0x20120
# define VCE_ECPU_SOFT_RESET (1 << 0)
# define VCE_FME_SOFT_RESET (1 << 2)
# define VCE_RB_BASE_LO2 0x2016c
# define VCE_RB_BASE_HI2 0x20170
# define VCE_RB_SIZE2 0x20174
# define VCE_RB_RPTR2 0x20178
# define VCE_RB_WPTR2 0x2017c
# define VCE_RB_BASE_LO 0x20180
# define VCE_RB_BASE_HI 0x20184
# define VCE_RB_SIZE 0x20188
# define VCE_RB_RPTR 0x2018c
# define VCE_RB_WPTR 0x20190
# define VCE_CLOCK_GATING_A 0x202f8
2015-05-11 22:01:54 +02:00
# define CGC_DYN_CLOCK_MODE (1 << 16)
2013-05-23 12:10:04 +02:00
# define VCE_CLOCK_GATING_B 0x202fc
# define VCE_UENC_CLOCK_GATING 0x205bc
# define VCE_UENC_REG_CLOCK_GATING 0x205c0
# define VCE_FW_REG_STATUS 0x20e10
# define VCE_FW_REG_STATUS_BUSY (1 << 0)
# define VCE_FW_REG_STATUS_PASS (1 << 3)
# define VCE_FW_REG_STATUS_DONE (1 << 11)
# define VCE_LMI_FW_START_KEYSEL 0x20e18
# define VCE_LMI_FW_PERIODIC_CTRL 0x20e20
# define VCE_LMI_CTRL2 0x20e74
# define VCE_LMI_CTRL 0x20e98
# define VCE_LMI_VM_CTRL 0x20ea0
# define VCE_LMI_SWAP_CNTL 0x20eb4
# define VCE_LMI_SWAP_CNTL1 0x20eb8
# define VCE_LMI_CACHE_CTRL 0x20ef4
# define VCE_CMD_NO_OP 0x00000000
# define VCE_CMD_END 0x00000001
# define VCE_CMD_IB 0x00000002
# define VCE_CMD_FENCE 0x00000003
# define VCE_CMD_TRAP 0x00000004
# define VCE_CMD_IB_AUTO 0x00000005
# define VCE_CMD_SEMAPHORE 0x00000006
2015-05-11 22:01:49 +02:00
/* discrete vce clocks */
# define CG_VCEPLL_FUNC_CNTL 0xc0030600
# define VCEPLL_RESET_MASK 0x00000001
# define VCEPLL_SLEEP_MASK 0x00000002
# define VCEPLL_BYPASS_EN_MASK 0x00000004
# define VCEPLL_CTLREQ_MASK 0x00000008
# define VCEPLL_VCO_MODE_MASK 0x00000600
# define VCEPLL_REF_DIV_MASK 0x003F0000
# define VCEPLL_CTLACK_MASK 0x40000000
# define VCEPLL_CTLACK2_MASK 0x80000000
# define CG_VCEPLL_FUNC_CNTL_2 0xc0030601
# define VCEPLL_PDIV_A(x) ((x) << 0)
# define VCEPLL_PDIV_A_MASK 0x0000007F
# define VCEPLL_PDIV_B(x) ((x) << 8)
# define VCEPLL_PDIV_B_MASK 0x00007F00
# define EVCLK_SRC_SEL(x) ((x) << 20)
# define EVCLK_SRC_SEL_MASK 0x01F00000
# define ECCLK_SRC_SEL(x) ((x) << 25)
# define ECCLK_SRC_SEL_MASK 0x3E000000
# define CG_VCEPLL_FUNC_CNTL_3 0xc0030602
# define VCEPLL_FB_DIV(x) ((x) << 0)
# define VCEPLL_FB_DIV_MASK 0x01FFFFFF
# define CG_VCEPLL_FUNC_CNTL_4 0xc0030603
# define CG_VCEPLL_FUNC_CNTL_5 0xc0030604
# define CG_VCEPLL_SPREAD_SPECTRUM 0xc0030606
# define VCEPLL_SSEN_MASK 0x00000001
2012-03-20 17:18:00 -04:00
# endif