iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
78be9217c4
linux/net/ethtool/common.c

561 lines
21 KiB
C
Raw Normal View History

ethtool: move string arrays into common file Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:29 +03:00
// SPDX-License-Identifier: GPL-2.0-only
ethtool: add tunnel info interface Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10 03:42:47 +03:00
#include <linux/ethtool_netlink.h>
ethtool: add timestamping related string sets Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 02:01:53 +03:00
#include <linux/net_tstamp.h>
ethtool: provide timestamping information with TSINFO_GET request Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 02:01:58 +03:00
#include <linux/phy.h>
net: ethtool: Introduce ethtool_phy_ops In order to decouple ethtool from its PHY library dependency, define an ethtool_phy_ops singleton which can be overriden by the PHY library when it loads with an appropriate set of function pointers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 07:27:56 +03:00
#include <linux/rtnetlink.h>
ethtool: add timestamping related string sets Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 02:01:53 +03:00
ethtool: move string arrays into common file Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:29 +03:00
#include "common.h"
const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] = {
[NETIF_F_SG_BIT] = "tx-scatter-gather",
[NETIF_F_IP_CSUM_BIT] = "tx-checksum-ipv4",
[NETIF_F_HW_CSUM_BIT] = "tx-checksum-ip-generic",
[NETIF_F_IPV6_CSUM_BIT] = "tx-checksum-ipv6",
[NETIF_F_HIGHDMA_BIT] = "highdma",
[NETIF_F_FRAGLIST_BIT] = "tx-scatter-gather-fraglist",
[NETIF_F_HW_VLAN_CTAG_TX_BIT] = "tx-vlan-hw-insert",
[NETIF_F_HW_VLAN_CTAG_RX_BIT] = "rx-vlan-hw-parse",
[NETIF_F_HW_VLAN_CTAG_FILTER_BIT] = "rx-vlan-filter",
[NETIF_F_HW_VLAN_STAG_TX_BIT] = "tx-vlan-stag-hw-insert",
[NETIF_F_HW_VLAN_STAG_RX_BIT] = "rx-vlan-stag-hw-parse",
[NETIF_F_HW_VLAN_STAG_FILTER_BIT] = "rx-vlan-stag-filter",
[NETIF_F_VLAN_CHALLENGED_BIT] = "vlan-challenged",
[NETIF_F_GSO_BIT] = "tx-generic-segmentation",
[NETIF_F_LLTX_BIT] = "tx-lockless",
[NETIF_F_NETNS_LOCAL_BIT] = "netns-local",
[NETIF_F_GRO_BIT] = "rx-gro",
[NETIF_F_GRO_HW_BIT] = "rx-gro-hw",
[NETIF_F_LRO_BIT] = "rx-lro",
[NETIF_F_TSO_BIT] = "tx-tcp-segmentation",
[NETIF_F_GSO_ROBUST_BIT] = "tx-gso-robust",
[NETIF_F_TSO_ECN_BIT] = "tx-tcp-ecn-segmentation",
[NETIF_F_TSO_MANGLEID_BIT] = "tx-tcp-mangleid-segmentation",
[NETIF_F_TSO6_BIT] = "tx-tcp6-segmentation",
[NETIF_F_FSO_BIT] = "tx-fcoe-segmentation",
[NETIF_F_GSO_GRE_BIT] = "tx-gre-segmentation",
[NETIF_F_GSO_GRE_CSUM_BIT] = "tx-gre-csum-segmentation",
[NETIF_F_GSO_IPXIP4_BIT] = "tx-ipxip4-segmentation",
[NETIF_F_GSO_IPXIP6_BIT] = "tx-ipxip6-segmentation",
[NETIF_F_GSO_UDP_TUNNEL_BIT] = "tx-udp_tnl-segmentation",
[NETIF_F_GSO_UDP_TUNNEL_CSUM_BIT] = "tx-udp_tnl-csum-segmentation",
[NETIF_F_GSO_PARTIAL_BIT] = "tx-gso-partial",
net: ethtool: add missing string for NETIF_F_GSO_TUNNEL_REMCSUM Commit e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") added new GSO type and a corresponding netdev feature, but missed Ethtool's 'netdev_features_strings' table. Give it a name so it will be exposed to userspace and become available for manual configuration. v3: - decouple from "netdev_features_strings[] cleanup" series; - no functional changes. v2: - don't split the "Fixes:" tag across lines; - no functional changes. Fixes: e585f2363637 ("udp: Changes to udp_offload to support remote checksum offload") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23 13:43:48 +03:00
[NETIF_F_GSO_TUNNEL_REMCSUM_BIT] = "tx-tunnel-remcsum-segmentation",
ethtool: move string arrays into common file Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:29 +03:00
[NETIF_F_GSO_SCTP_BIT] = "tx-sctp-segmentation",
[NETIF_F_GSO_ESP_BIT] = "tx-esp-segmentation",
[NETIF_F_GSO_UDP_L4_BIT] = "tx-udp-segmentation",
net: ethtool: add missing NETIF_F_GSO_FRAGLIST feature string Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As a result, fraglist GSO feature is not shown in 'ethtool -k' output and can't be toggled on/off. The fix is trivial. Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17 23:42:47 +03:00
[NETIF_F_GSO_FRAGLIST_BIT] = "tx-gso-list",
ethtool: move string arrays into common file Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:29 +03:00
[NETIF_F_FCOE_CRC_BIT] = "tx-checksum-fcoe-crc",
[NETIF_F_SCTP_CRC_BIT] = "tx-checksum-sctp",
[NETIF_F_FCOE_MTU_BIT] = "fcoe-mtu",
[NETIF_F_NTUPLE_BIT] = "rx-ntuple-filter",
[NETIF_F_RXHASH_BIT] = "rx-hashing",
[NETIF_F_RXCSUM_BIT] = "rx-checksum",
[NETIF_F_NOCACHE_COPY_BIT] = "tx-nocache-copy",
[NETIF_F_LOOPBACK_BIT] = "loopback",
[NETIF_F_RXFCS_BIT] = "rx-fcs",
[NETIF_F_RXALL_BIT] = "rx-all",
[NETIF_F_HW_L2FW_DOFFLOAD_BIT] = "l2-fwd-offload",
[NETIF_F_HW_TC_BIT] = "hw-tc-offload",
[NETIF_F_HW_ESP_BIT] = "esp-hw-offload",
[NETIF_F_HW_ESP_TX_CSUM_BIT] = "esp-tx-csum-hw-offload",
[NETIF_F_RX_UDP_TUNNEL_PORT_BIT] = "rx-udp_tunnel-port-offload",
[NETIF_F_HW_TLS_RECORD_BIT] = "tls-hw-record",
[NETIF_F_HW_TLS_TX_BIT] = "tls-hw-tx-offload",
[NETIF_F_HW_TLS_RX_BIT] = "tls-hw-rx-offload",
net: Add fraglist GRO/GSO feature flags This adds new Fraglist GRO/GSO feature flags. They will be used to configure fraglist GRO/GSO what will be implemented with some followup paches. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25 13:26:42 +03:00
[NETIF_F_GRO_FRAGLIST_BIT] = "rx-gro-list",
net: introduce the MACSEC netdev feature This patch introduce a new netdev feature, which will be used by drivers to state they can perform MACsec transformations in hardware. The patchset was gathered by Mark, macsec functinality itself was implemented by Dmitry, Mark and Pavel Belous. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25 15:52:30 +03:00
[NETIF_F_HW_MACSEC_BIT] = "macsec-hw-offload",
net: introduce a netdev feature for UDP GRO forwarding Introduce a new netdev feature, NETIF_F_GRO_UDP_FWD, to allow user to turn UDP GRO on and off for forwarding. Defaults to off to not change current datapath. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22 21:19:48 +03:00
[NETIF_F_GRO_UDP_FWD_BIT] = "rx-udp-gro-forwarding",
ethtool: move string arrays into common file Introduce file net/ethtool/common.c for code shared by ioctl and netlink ethtool interface. Move name tables of features, RSS hash functions, tunables and PHY tunables into this file. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:29 +03:00
};
const char
rss_hash_func_strings[ETH_RSS_HASH_FUNCS_COUNT][ETH_GSTRING_LEN] = {
[ETH_RSS_HASH_TOP_BIT] = "toeplitz",
[ETH_RSS_HASH_XOR_BIT] = "xor",
[ETH_RSS_HASH_CRC32_BIT] = "crc32",
};
const char
tunable_strings[__ETHTOOL_TUNABLE_COUNT][ETH_GSTRING_LEN] = {
[ETHTOOL_ID_UNSPEC] = "Unspec",
[ETHTOOL_RX_COPYBREAK] = "rx-copybreak",
[ETHTOOL_TX_COPYBREAK] = "tx-copybreak",
[ETHTOOL_PFC_PREVENTION_TOUT] = "pfc-prevention-tout",
};
const char
phy_tunable_strings[__ETHTOOL_PHY_TUNABLE_COUNT][ETH_GSTRING_LEN] = {
[ETHTOOL_ID_UNSPEC] = "Unspec",
[ETHTOOL_PHY_DOWNSHIFT] = "phy-downshift",
[ETHTOOL_PHY_FAST_LINK_DOWN] = "phy-fast-link-down",
[ETHTOOL_PHY_EDPD] = "phy-energy-detect-power-down",
};
ethtool: provide link mode names as a string set Unlike e.g. netdev features, the ethtool ioctl interface requires link mode table to be in sync between kernel and userspace for userspace to be able to display and set all link modes supported by kernel. The way arbitrary length bitsets are implemented in netlink interface, this will be no longer needed. To allow userspace to access all link modes running kernel supports, add table of ethernet link mode names and make it available as a string set to userspace GET_STRSET requests. Add build time check to make sure names are defined for all modes declared in enum ethtool_link_mode_bit_indices. Once the string set is available, make it also accessible via ioctl. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:34 +03:00
#define __LINK_MODE_NAME(speed, type, duplex) \
#speed "base" #type "/" #duplex
#define __DEFINE_LINK_MODE_NAME(speed, type, duplex) \
[ETHTOOL_LINK_MODE(speed, type, duplex)] = \
__LINK_MODE_NAME(speed, type, duplex)
#define __DEFINE_SPECIAL_MODE_NAME(_mode, _name) \
[ETHTOOL_LINK_MODE_ ## _mode ## _BIT] = _name
const char link_mode_names[][ETH_GSTRING_LEN] = {
__DEFINE_LINK_MODE_NAME(10, T, Half),
__DEFINE_LINK_MODE_NAME(10, T, Full),
__DEFINE_LINK_MODE_NAME(100, T, Half),
__DEFINE_LINK_MODE_NAME(100, T, Full),
__DEFINE_LINK_MODE_NAME(1000, T, Half),
__DEFINE_LINK_MODE_NAME(1000, T, Full),
__DEFINE_SPECIAL_MODE_NAME(Autoneg, "Autoneg"),
__DEFINE_SPECIAL_MODE_NAME(TP, "TP"),
__DEFINE_SPECIAL_MODE_NAME(AUI, "AUI"),
__DEFINE_SPECIAL_MODE_NAME(MII, "MII"),
__DEFINE_SPECIAL_MODE_NAME(FIBRE, "FIBRE"),
__DEFINE_SPECIAL_MODE_NAME(BNC, "BNC"),
__DEFINE_LINK_MODE_NAME(10000, T, Full),
__DEFINE_SPECIAL_MODE_NAME(Pause, "Pause"),
__DEFINE_SPECIAL_MODE_NAME(Asym_Pause, "Asym_Pause"),
__DEFINE_LINK_MODE_NAME(2500, X, Full),
__DEFINE_SPECIAL_MODE_NAME(Backplane, "Backplane"),
__DEFINE_LINK_MODE_NAME(1000, KX, Full),
__DEFINE_LINK_MODE_NAME(10000, KX4, Full),
__DEFINE_LINK_MODE_NAME(10000, KR, Full),
__DEFINE_SPECIAL_MODE_NAME(10000baseR_FEC, "10000baseR_FEC"),
__DEFINE_LINK_MODE_NAME(20000, MLD2, Full),
__DEFINE_LINK_MODE_NAME(20000, KR2, Full),
__DEFINE_LINK_MODE_NAME(40000, KR4, Full),
__DEFINE_LINK_MODE_NAME(40000, CR4, Full),
__DEFINE_LINK_MODE_NAME(40000, SR4, Full),
__DEFINE_LINK_MODE_NAME(40000, LR4, Full),
__DEFINE_LINK_MODE_NAME(56000, KR4, Full),
__DEFINE_LINK_MODE_NAME(56000, CR4, Full),
__DEFINE_LINK_MODE_NAME(56000, SR4, Full),
__DEFINE_LINK_MODE_NAME(56000, LR4, Full),
__DEFINE_LINK_MODE_NAME(25000, CR, Full),
__DEFINE_LINK_MODE_NAME(25000, KR, Full),
__DEFINE_LINK_MODE_NAME(25000, SR, Full),
__DEFINE_LINK_MODE_NAME(50000, CR2, Full),
__DEFINE_LINK_MODE_NAME(50000, KR2, Full),
__DEFINE_LINK_MODE_NAME(100000, KR4, Full),
__DEFINE_LINK_MODE_NAME(100000, SR4, Full),
__DEFINE_LINK_MODE_NAME(100000, CR4, Full),
__DEFINE_LINK_MODE_NAME(100000, LR4_ER4, Full),
__DEFINE_LINK_MODE_NAME(50000, SR2, Full),
__DEFINE_LINK_MODE_NAME(1000, X, Full),
__DEFINE_LINK_MODE_NAME(10000, CR, Full),
__DEFINE_LINK_MODE_NAME(10000, SR, Full),
__DEFINE_LINK_MODE_NAME(10000, LR, Full),
__DEFINE_LINK_MODE_NAME(10000, LRM, Full),
__DEFINE_LINK_MODE_NAME(10000, ER, Full),
__DEFINE_LINK_MODE_NAME(2500, T, Full),
__DEFINE_LINK_MODE_NAME(5000, T, Full),
__DEFINE_SPECIAL_MODE_NAME(FEC_NONE, "None"),
__DEFINE_SPECIAL_MODE_NAME(FEC_RS, "RS"),
__DEFINE_SPECIAL_MODE_NAME(FEC_BASER, "BASER"),
__DEFINE_LINK_MODE_NAME(50000, KR, Full),
__DEFINE_LINK_MODE_NAME(50000, SR, Full),
__DEFINE_LINK_MODE_NAME(50000, CR, Full),
__DEFINE_LINK_MODE_NAME(50000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_NAME(50000, DR, Full),
__DEFINE_LINK_MODE_NAME(100000, KR2, Full),
__DEFINE_LINK_MODE_NAME(100000, SR2, Full),
__DEFINE_LINK_MODE_NAME(100000, CR2, Full),
__DEFINE_LINK_MODE_NAME(100000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_NAME(100000, DR2, Full),
__DEFINE_LINK_MODE_NAME(200000, KR4, Full),
__DEFINE_LINK_MODE_NAME(200000, SR4, Full),
__DEFINE_LINK_MODE_NAME(200000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_NAME(200000, DR4, Full),
__DEFINE_LINK_MODE_NAME(200000, CR4, Full),
__DEFINE_LINK_MODE_NAME(100, T1, Full),
__DEFINE_LINK_MODE_NAME(1000, T1, Full),
__DEFINE_LINK_MODE_NAME(400000, KR8, Full),
__DEFINE_LINK_MODE_NAME(400000, SR8, Full),
__DEFINE_LINK_MODE_NAME(400000, LR8_ER8_FR8, Full),
__DEFINE_LINK_MODE_NAME(400000, DR8, Full),
__DEFINE_LINK_MODE_NAME(400000, CR8, Full),
ethtool: Add support for low latency RS FEC Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2020-02-12 01:32:52 +03:00
__DEFINE_SPECIAL_MODE_NAME(FEC_LLRS, "LLRS"),
ethtool: Add support for 100Gbps per lane link modes Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07 06:42:32 +03:00
__DEFINE_LINK_MODE_NAME(100000, KR, Full),
__DEFINE_LINK_MODE_NAME(100000, SR, Full),
__DEFINE_LINK_MODE_NAME(100000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_NAME(100000, DR, Full),
__DEFINE_LINK_MODE_NAME(100000, CR, Full),
__DEFINE_LINK_MODE_NAME(200000, KR2, Full),
__DEFINE_LINK_MODE_NAME(200000, SR2, Full),
__DEFINE_LINK_MODE_NAME(200000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_NAME(200000, DR2, Full),
__DEFINE_LINK_MODE_NAME(200000, CR2, Full),
__DEFINE_LINK_MODE_NAME(400000, KR4, Full),
__DEFINE_LINK_MODE_NAME(400000, SR4, Full),
__DEFINE_LINK_MODE_NAME(400000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_NAME(400000, DR4, Full),
__DEFINE_LINK_MODE_NAME(400000, CR4, Full),
ethtool: Add 100base-FX link mode entries Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18 22:14:51 +03:00
__DEFINE_LINK_MODE_NAME(100, FX, Half),
__DEFINE_LINK_MODE_NAME(100, FX, Full),
ethtool: provide link mode names as a string set Unlike e.g. netdev features, the ethtool ioctl interface requires link mode table to be in sync between kernel and userspace for userspace to be able to display and set all link modes supported by kernel. The way arbitrary length bitsets are implemented in netlink interface, this will be no longer needed. To allow userspace to access all link modes running kernel supports, add table of ethernet link mode names and make it available as a string set to userspace GET_STRSET requests. Add build time check to make sure names are defined for all modes declared in enum ethtool_link_mode_bit_indices. Once the string set is available, make it also accessible via ioctl. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11 12:58:34 +03:00
};
static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
ethtool: provide link settings with LINKINFO_GET request Implement LINKINFO_GET netlink request to get basic link settings provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides settings not directly related to autonegotiation and link mode selection: physical port, phy MDIO address, MDI(-X) status, MDI(-X) control and transceiver. LINKINFO_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 17:55:48 +03:00
ethtool: Get link mode in use instead of speed and duplex parameters Currently, when user space queries the link's parameters, as speed and duplex, each parameter is passed from the driver to ethtool. Instead, get the link mode bit in use, and derive each of the parameters from it in ethtool. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02 21:06:07 +03:00
#define __LINK_MODE_LANES_CR 1
#define __LINK_MODE_LANES_CR2 2
#define __LINK_MODE_LANES_CR4 4
#define __LINK_MODE_LANES_CR8 8
#define __LINK_MODE_LANES_DR 1
#define __LINK_MODE_LANES_DR2 2
#define __LINK_MODE_LANES_DR4 4
#define __LINK_MODE_LANES_DR8 8
#define __LINK_MODE_LANES_KR 1
#define __LINK_MODE_LANES_KR2 2
#define __LINK_MODE_LANES_KR4 4
#define __LINK_MODE_LANES_KR8 8
#define __LINK_MODE_LANES_SR 1
#define __LINK_MODE_LANES_SR2 2
#define __LINK_MODE_LANES_SR4 4
#define __LINK_MODE_LANES_SR8 8
#define __LINK_MODE_LANES_ER 1
#define __LINK_MODE_LANES_KX 1
#define __LINK_MODE_LANES_KX4 4
#define __LINK_MODE_LANES_LR 1
#define __LINK_MODE_LANES_LR4 4
#define __LINK_MODE_LANES_LR4_ER4 4
#define __LINK_MODE_LANES_LR_ER_FR 1
#define __LINK_MODE_LANES_LR2_ER2_FR2 2
#define __LINK_MODE_LANES_LR4_ER4_FR4 4
#define __LINK_MODE_LANES_LR8_ER8_FR8 8
#define __LINK_MODE_LANES_LRM 1
#define __LINK_MODE_LANES_MLD2 2
#define __LINK_MODE_LANES_T 1
#define __LINK_MODE_LANES_T1 1
#define __LINK_MODE_LANES_X 1
#define __LINK_MODE_LANES_FX 1
#define __DEFINE_LINK_MODE_PARAMS(_speed, _type, _duplex) \
[ETHTOOL_LINK_MODE(_speed, _type, _duplex)] = { \
.speed = SPEED_ ## _speed, \
.lanes = __LINK_MODE_LANES_ ## _type, \
.duplex = __DUPLEX_ ## _duplex \
}
#define __DUPLEX_Half DUPLEX_HALF
#define __DUPLEX_Full DUPLEX_FULL
#define __DEFINE_SPECIAL_MODE_PARAMS(_mode) \
[ETHTOOL_LINK_MODE_ ## _mode ## _BIT] = { \
.speed = SPEED_UNKNOWN, \
.lanes = 0, \
.duplex = DUPLEX_UNKNOWN, \
}
const struct link_mode_info link_mode_params[] = {
__DEFINE_LINK_MODE_PARAMS(10, T, Half),
__DEFINE_LINK_MODE_PARAMS(10, T, Full),
__DEFINE_LINK_MODE_PARAMS(100, T, Half),
__DEFINE_LINK_MODE_PARAMS(100, T, Full),
__DEFINE_LINK_MODE_PARAMS(1000, T, Half),
__DEFINE_LINK_MODE_PARAMS(1000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Autoneg),
__DEFINE_SPECIAL_MODE_PARAMS(TP),
__DEFINE_SPECIAL_MODE_PARAMS(AUI),
__DEFINE_SPECIAL_MODE_PARAMS(MII),
__DEFINE_SPECIAL_MODE_PARAMS(FIBRE),
__DEFINE_SPECIAL_MODE_PARAMS(BNC),
__DEFINE_LINK_MODE_PARAMS(10000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Pause),
__DEFINE_SPECIAL_MODE_PARAMS(Asym_Pause),
__DEFINE_LINK_MODE_PARAMS(2500, X, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Backplane),
__DEFINE_LINK_MODE_PARAMS(1000, KX, Full),
__DEFINE_LINK_MODE_PARAMS(10000, KX4, Full),
__DEFINE_LINK_MODE_PARAMS(10000, KR, Full),
[ETHTOOL_LINK_MODE_10000baseR_FEC_BIT] = {
.speed = SPEED_10000,
.duplex = DUPLEX_FULL,
},
__DEFINE_LINK_MODE_PARAMS(20000, MLD2, Full),
__DEFINE_LINK_MODE_PARAMS(20000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(40000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, LR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, LR4, Full),
__DEFINE_LINK_MODE_PARAMS(25000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(25000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(25000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(50000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR4_ER4, Full),
__DEFINE_LINK_MODE_PARAMS(50000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(1000, X, Full),
__DEFINE_LINK_MODE_PARAMS(10000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, LR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, LRM, Full),
__DEFINE_LINK_MODE_PARAMS(10000, ER, Full),
__DEFINE_LINK_MODE_PARAMS(2500, T, Full),
__DEFINE_LINK_MODE_PARAMS(5000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_NONE),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_RS),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_BASER),
__DEFINE_LINK_MODE_PARAMS(50000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, DR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, DR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, DR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100, T1, Full),
__DEFINE_LINK_MODE_PARAMS(1000, T1, Full),
__DEFINE_LINK_MODE_PARAMS(400000, KR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, SR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, LR8_ER8_FR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, DR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, CR8, Full),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_LLRS),
__DEFINE_LINK_MODE_PARAMS(100000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, DR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(200000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, DR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(400000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, DR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100, FX, Half),
__DEFINE_LINK_MODE_PARAMS(100, FX, Full),
};
static_assert(ARRAY_SIZE(link_mode_params) == __ETHTOOL_LINK_MODE_MASK_NBITS);
ethtool: provide message mask with DEBUG_GET request Implement DEBUG_GET request to get debugging settings for a device. At the moment, only message mask corresponding to message level as reported by ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in ioctl interface but almost all drivers interpret it as a bit mask.) As part of the implementation, provide symbolic names for message mask bits as ETH_SS_MSG_CLASSES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27 01:11:04 +03:00
const char netif_msg_class_names[][ETH_GSTRING_LEN] = {
[NETIF_MSG_DRV_BIT] = "drv",
[NETIF_MSG_PROBE_BIT] = "probe",
[NETIF_MSG_LINK_BIT] = "link",
[NETIF_MSG_TIMER_BIT] = "timer",
[NETIF_MSG_IFDOWN_BIT] = "ifdown",
[NETIF_MSG_IFUP_BIT] = "ifup",
[NETIF_MSG_RX_ERR_BIT] = "rx_err",
[NETIF_MSG_TX_ERR_BIT] = "tx_err",
[NETIF_MSG_TX_QUEUED_BIT] = "tx_queued",
[NETIF_MSG_INTR_BIT] = "intr",
[NETIF_MSG_TX_DONE_BIT] = "tx_done",
[NETIF_MSG_RX_STATUS_BIT] = "rx_status",
[NETIF_MSG_PKTDATA_BIT] = "pktdata",
[NETIF_MSG_HW_BIT] = "hw",
[NETIF_MSG_WOL_BIT] = "wol",
};
static_assert(ARRAY_SIZE(netif_msg_class_names) == NETIF_MSG_CLASS_COUNT);
ethtool: provide WoL settings with WOL_GET request Implement WOL_GET request to get wake-on-lan settings for a device, traditionally available via ETHTOOL_GWOL ioctl request. As part of the implementation, provide symbolic names for wake-on-line modes as ETH_SS_WOL_MODES string set. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27 01:11:13 +03:00
const char wol_mode_names[][ETH_GSTRING_LEN] = {
[const_ilog2(WAKE_PHY)] = "phy",
[const_ilog2(WAKE_UCAST)] = "ucast",
[const_ilog2(WAKE_MCAST)] = "mcast",
[const_ilog2(WAKE_BCAST)] = "bcast",
[const_ilog2(WAKE_ARP)] = "arp",
[const_ilog2(WAKE_MAGIC)] = "magic",
[const_ilog2(WAKE_MAGICSECURE)] = "magicsecure",
[const_ilog2(WAKE_FILTER)] = "filter",
};
static_assert(ARRAY_SIZE(wol_mode_names) == WOL_MODE_COUNT);
ethtool: add timestamping related string sets Add three string sets related to timestamping information: ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags ETH_SS_TS_TX_TYPES: timestamping Tx types ETH_SS_TS_RX_FILTERS: timestamping Rx filters These will be used for TIMESTAMP_GET request. v2: avoid compiler warning ("enumeration value not handled in switch") in net_hwtstamp_validate() v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 02:01:53 +03:00
const char sof_timestamping_names[][ETH_GSTRING_LEN] = {
[const_ilog2(SOF_TIMESTAMPING_TX_HARDWARE)] = "hardware-transmit",
[const_ilog2(SOF_TIMESTAMPING_TX_SOFTWARE)] = "software-transmit",
[const_ilog2(SOF_TIMESTAMPING_RX_HARDWARE)] = "hardware-receive",
[const_ilog2(SOF_TIMESTAMPING_RX_SOFTWARE)] = "software-receive",
[const_ilog2(SOF_TIMESTAMPING_SOFTWARE)] = "software-system-clock",
[const_ilog2(SOF_TIMESTAMPING_SYS_HARDWARE)] = "hardware-legacy-clock",
[const_ilog2(SOF_TIMESTAMPING_RAW_HARDWARE)] = "hardware-raw-clock",
[const_ilog2(SOF_TIMESTAMPING_OPT_ID)] = "option-id",
[const_ilog2(SOF_TIMESTAMPING_TX_SCHED)] = "sched-transmit",
[const_ilog2(SOF_TIMESTAMPING_TX_ACK)] = "ack-transmit",
[const_ilog2(SOF_TIMESTAMPING_OPT_CMSG)] = "option-cmsg",
[const_ilog2(SOF_TIMESTAMPING_OPT_TSONLY)] = "option-tsonly",
[const_ilog2(SOF_TIMESTAMPING_OPT_STATS)] = "option-stats",
[const_ilog2(SOF_TIMESTAMPING_OPT_PKTINFO)] = "option-pktinfo",
[const_ilog2(SOF_TIMESTAMPING_OPT_TX_SWHW)] = "option-tx-swhw",
};
static_assert(ARRAY_SIZE(sof_timestamping_names) == __SOF_TIMESTAMPING_CNT);
const char ts_tx_type_names[][ETH_GSTRING_LEN] = {
[HWTSTAMP_TX_OFF] = "off",
[HWTSTAMP_TX_ON] = "on",
[HWTSTAMP_TX_ONESTEP_SYNC] = "onestep-sync",
[HWTSTAMP_TX_ONESTEP_P2P] = "onestep-p2p",
};
static_assert(ARRAY_SIZE(ts_tx_type_names) == __HWTSTAMP_TX_CNT);
const char ts_rx_filter_names[][ETH_GSTRING_LEN] = {
[HWTSTAMP_FILTER_NONE] = "none",
[HWTSTAMP_FILTER_ALL] = "all",
[HWTSTAMP_FILTER_SOME] = "some",
[HWTSTAMP_FILTER_PTP_V1_L4_EVENT] = "ptpv1-l4-event",
[HWTSTAMP_FILTER_PTP_V1_L4_SYNC] = "ptpv1-l4-sync",
[HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ] = "ptpv1-l4-delay-req",
[HWTSTAMP_FILTER_PTP_V2_L4_EVENT] = "ptpv2-l4-event",
[HWTSTAMP_FILTER_PTP_V2_L4_SYNC] = "ptpv2-l4-sync",
[HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ] = "ptpv2-l4-delay-req",
[HWTSTAMP_FILTER_PTP_V2_L2_EVENT] = "ptpv2-l2-event",
[HWTSTAMP_FILTER_PTP_V2_L2_SYNC] = "ptpv2-l2-sync",
[HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ] = "ptpv2-l2-delay-req",
[HWTSTAMP_FILTER_PTP_V2_EVENT] = "ptpv2-event",
[HWTSTAMP_FILTER_PTP_V2_SYNC] = "ptpv2-sync",
[HWTSTAMP_FILTER_PTP_V2_DELAY_REQ] = "ptpv2-delay-req",
[HWTSTAMP_FILTER_NTP_ALL] = "ntp-all",
};
static_assert(ARRAY_SIZE(ts_rx_filter_names) == __HWTSTAMP_FILTER_CNT);
ethtool: add tunnel info interface Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10 03:42:47 +03:00
const char udp_tunnel_type_names[][ETH_GSTRING_LEN] = {
[ETHTOOL_UDP_TUNNEL_TYPE_VXLAN] = "vxlan",
[ETHTOOL_UDP_TUNNEL_TYPE_GENEVE] = "geneve",
[ETHTOOL_UDP_TUNNEL_TYPE_VXLAN_GPE] = "vxlan-gpe",
};
static_assert(ARRAY_SIZE(udp_tunnel_type_names) ==
__ETHTOOL_UDP_TUNNEL_TYPE_CNT);
ethtool: provide link settings with LINKINFO_GET request Implement LINKINFO_GET netlink request to get basic link settings provided by ETHTOOL_GLINKSETTINGS and ETHTOOL_GSET ioctl commands. This request provides settings not directly related to autonegotiation and link mode selection: physical port, phy MDIO address, MDI(-X) status, MDI(-X) control and transceiver. LINKINFO_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 17:55:48 +03:00
/* return false if legacy contained non-0 deprecated fields
* maxtxpkt/maxrxpkt. rest of ksettings always updated
*/
bool
convert_legacy_settings_to_link_ksettings(
struct ethtool_link_ksettings *link_ksettings,
const struct ethtool_cmd *legacy_settings)
{
bool retval = true;
memset(link_ksettings, 0, sizeof(*link_ksettings));
/* This is used to tell users that driver is still using these
* deprecated legacy fields, and they should not use
* %ETHTOOL_GLINKSETTINGS/%ETHTOOL_SLINKSETTINGS
*/
if (legacy_settings->maxtxpkt ||
legacy_settings->maxrxpkt)
retval = false;
ethtool_convert_legacy_u32_to_link_mode(
link_ksettings->link_modes.supported,
legacy_settings->supported);
ethtool_convert_legacy_u32_to_link_mode(
link_ksettings->link_modes.advertising,
legacy_settings->advertising);
ethtool_convert_legacy_u32_to_link_mode(
link_ksettings->link_modes.lp_advertising,
legacy_settings->lp_advertising);
link_ksettings->base.speed
= ethtool_cmd_speed(legacy_settings);
link_ksettings->base.duplex
= legacy_settings->duplex;
link_ksettings->base.port
= legacy_settings->port;
link_ksettings->base.phy_address
= legacy_settings->phy_address;
link_ksettings->base.autoneg
= legacy_settings->autoneg;
link_ksettings->base.mdio_support
= legacy_settings->mdio_support;
link_ksettings->base.eth_tp_mdix
= legacy_settings->eth_tp_mdix;
link_ksettings->base.eth_tp_mdix_ctrl
= legacy_settings->eth_tp_mdix_ctrl;
return retval;
}
ethtool: provide link state with LINKSTATE_GET request Implement LINKSTATE_GET netlink request to get link state information. At the moment, only link up flag as provided by ETHTOOL_GLINK ioctl command is returned. LINKSTATE_GET request can be used with NLM_F_DUMP (without device identification) to request the information for all devices in current network namespace providing the data. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-27 17:56:23 +03:00
int __ethtool_get_link(struct net_device *dev)
{
if (!dev->ethtool_ops->get_link)
return -EOPNOTSUPP;
return netif_running(dev) && dev->ethtool_ops->get_link(dev);
}
ethtool: set device channel counts with CHANNELS_SET request Implement CHANNELS_SET netlink request to set channel counts of a network device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request. Like the ioctl implementation, the generic ethtool code checks if supplied values do not exceed driver defined limits; if they do, first offending attribute is reported using extack. Checks preventing removing channels used for RX indirection table or zerocopy AF_XDP socket are also implemented. Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be used by both ioctl and netlink code. v2: - fix netdev reference leak in error path (found by Jakub Kicinsky) Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 23:08:43 +03:00
int ethtool_get_max_rxfh_channel(struct net_device *dev, u32 *max)
{
u32 dev_size, current_max = 0;
u32 *indir;
int ret;
if (!dev->ethtool_ops->get_rxfh_indir_size ||
!dev->ethtool_ops->get_rxfh)
return -EOPNOTSUPP;
dev_size = dev->ethtool_ops->get_rxfh_indir_size(dev);
if (dev_size == 0)
return -EOPNOTSUPP;
indir = kcalloc(dev_size, sizeof(indir[0]), GFP_USER);
if (!indir)
return -ENOMEM;
ret = dev->ethtool_ops->get_rxfh(dev, indir, NULL, NULL);
if (ret)
goto out;
while (dev_size--)
current_max = max(current_max, indir[dev_size]);
*max = current_max;
out:
kfree(indir);
return ret;
}
net: ethtool: require drivers to set supported_coalesce_params Now that all in-tree drivers have been updated we can make the supported_coalesce_params mandatory. To save debugging time in case some driver was missed (or is out of tree) add a warning when netdev is registered with set_coalesce but without supported_coalesce_params. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16 23:47:12 +03:00
int ethtool_check_ops(const struct ethtool_ops *ops)
{
if (WARN_ON(ops->set_coalesce && !ops->supported_coalesce_params))
return -EINVAL;
/* NOTE: sufficiently insane drivers may swap ethtool_ops at runtime,
* the fact that ops are checked at registration time does not
* mean the ops attached to a netdev later on are sane.
*/
return 0;
}
ethtool: provide timestamping information with TSINFO_GET request Implement TSINFO_GET request to get timestamping information for a network device. This is traditionally available via ETHTOOL_GET_TS_INFO ioctl request. Move part of ethtool_get_ts_info() into common.c so that ioctl and netlink code use the same logic to get timestamping information from the device. v3: use "TSINFO" rather than "TIMESTAMP", suggested by Richard Cochran Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-28 02:01:58 +03:00
int __ethtool_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info)
{
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
memset(info, 0, sizeof(*info));
info->cmd = ETHTOOL_GET_TS_INFO;
if (phy_has_tsinfo(phydev))
return phy_ts_info(phydev, info);
if (ops->get_ts_info)
return ops->get_ts_info(dev, info);
info->so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE |
SOF_TIMESTAMPING_SOFTWARE;
info->phc_index = -1;
return 0;
}
net: ethtool: Introduce ethtool_phy_ops In order to decouple ethtool from its PHY library dependency, define an ethtool_phy_ops singleton which can be overriden by the PHY library when it loads with an appropriate set of function pointers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-06 07:27:56 +03:00
const struct ethtool_phy_ops *ethtool_phy_ops;
void ethtool_set_ethtool_phy_ops(const struct ethtool_phy_ops *ops)
{
rtnl_lock();
ethtool_phy_ops = ops;
rtnl_unlock();
}
EXPORT_SYMBOL_GPL(ethtool_set_ethtool_phy_ops);
Reference in New Issue Copy Permalink