2010-05-28 23:09:12 -04:00
/*
* Copyright 2010 Tilera Corporation . All Rights Reserved .
*
* This program is free software ; you can redistribute it and / or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation , version 2.
*
* This program is distributed in the hope that it will be useful , but
* WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE , GOOD TITLE or
* NON INFRINGEMENT . See the GNU General Public License for
* more details .
*/
# ifndef _ASM_TILE_PROCESSOR_H
# define _ASM_TILE_PROCESSOR_H
# ifndef __ASSEMBLY__
/*
* NOTE : we don ' t include < linux / ptrace . h > or < linux / percpu . h > as one
* normally would , due to # include dependencies .
*/
arch/tile: Add driver to enable access to the user dynamic network.
This network (the "UDN") connects all the cpus on the chip in a
wormhole-routed dynamic network. Subrectangles of the chip can
be allocated by a "create" ioctl on /dev/hardwall, and then to access the
UDN in that rectangle, tasks must perform an "activate" ioctl on that
same file object after affinitizing themselves to a single cpu in
the region. Sending a wormhole-routed message that tries to leave
that subrectangle causes all activated tasks to receive a SIGILL
(just as they would if they tried to access the UDN without first
activating themselves to a hardwall rectangle).
The original submission of this code to LKML had the driver
instantiated under /proc/tile/hardwall. Now we just use a character
device for this, conventionally /dev/hardwall. Some futures planning
for the TILE-Gx chip suggests that we may want to have other types of
devices that share the general model of "bind a task to a cpu, then
'activate' a file descriptor on a pseudo-device that gives access to
some hardware resource". As such, we are using a device rather
than, for example, a syscall, to set up and activate this code.
As part of this change, the compat_ptr() declaration was fixed and used
to pass the compat_ioctl argument to the normal ioctl. So far we limit
compat code to 2GB, so the difference between zero-extend and sign-extend
(the latter being correct, eventually) had been overlooked.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 17:00:56 -04:00
# include <linux/types.h>
2010-05-28 23:09:12 -04:00
# include <asm/ptrace.h>
# include <asm/percpu.h>
# include <arch/chip.h>
# include <arch/spr_def.h>
struct task_struct ;
struct thread_struct ;
typedef struct {
unsigned long seg ;
} mm_segment_t ;
/*
* Default implementation of macro that returns current
* instruction pointer ( " program counter " ) .
*/
void * current_text_addr ( void ) ;
# if CHIP_HAS_TILE_DMA()
/* Capture the state of a suspended DMA. */
struct tile_dma_state {
int enabled ;
unsigned long src ;
unsigned long dest ;
unsigned long strides ;
unsigned long chunk_size ;
unsigned long src_chunk ;
unsigned long dest_chunk ;
unsigned long byte ;
unsigned long status ;
} ;
/*
* A mask of the DMA status register for selecting only the ' running '
* and ' done ' bits .
*/
# define DMA_STATUS_MASK \
( SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK )
# endif
/*
* Track asynchronous TLB events ( faults and access violations )
* that occur while we are in kernel mode from DMA or the SN processor .
*/
struct async_tlb {
short fault_num ; /* original fault number; 0 if none */
char is_fault ; /* was it a fault (vs an access violation) */
char is_write ; /* for fault: was it caused by a write? */
unsigned long address ; /* what address faulted? */
} ;
arch/tile: Add driver to enable access to the user dynamic network.
This network (the "UDN") connects all the cpus on the chip in a
wormhole-routed dynamic network. Subrectangles of the chip can
be allocated by a "create" ioctl on /dev/hardwall, and then to access the
UDN in that rectangle, tasks must perform an "activate" ioctl on that
same file object after affinitizing themselves to a single cpu in
the region. Sending a wormhole-routed message that tries to leave
that subrectangle causes all activated tasks to receive a SIGILL
(just as they would if they tried to access the UDN without first
activating themselves to a hardwall rectangle).
The original submission of this code to LKML had the driver
instantiated under /proc/tile/hardwall. Now we just use a character
device for this, conventionally /dev/hardwall. Some futures planning
for the TILE-Gx chip suggests that we may want to have other types of
devices that share the general model of "bind a task to a cpu, then
'activate' a file descriptor on a pseudo-device that gives access to
some hardware resource". As such, we are using a device rather
than, for example, a syscall, to set up and activate this code.
As part of this change, the compat_ptr() declaration was fixed and used
to pass the compat_ioctl argument to the normal ioctl. So far we limit
compat code to 2GB, so the difference between zero-extend and sign-extend
(the latter being correct, eventually) had been overlooked.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 17:00:56 -04:00
# ifdef CONFIG_HARDWALL
struct hardwall_info ;
# endif
2010-05-28 23:09:12 -04:00
struct thread_struct {
/* kernel stack pointer */
unsigned long ksp ;
/* kernel PC */
unsigned long pc ;
/* starting user stack pointer (for page migration) */
unsigned long usp0 ;
/* pid of process that created this one */
pid_t creator_pid ;
# if CHIP_HAS_TILE_DMA()
/* DMA info for suspended threads (byte == 0 means no DMA state) */
struct tile_dma_state tile_dma_state ;
# endif
/* User EX_CONTEXT registers */
unsigned long ex_context [ 2 ] ;
/* User SYSTEM_SAVE registers */
unsigned long system_save [ 4 ] ;
/* User interrupt mask */
unsigned long long interrupt_mask ;
/* User interrupt-control 0 state */
unsigned long intctrl_0 ;
# if CHIP_HAS_PROC_STATUS_SPR()
/* Any other miscellaneous processor state bits */
unsigned long proc_status ;
# endif
2010-09-15 11:16:10 -04:00
# if !CHIP_HAS_FIXED_INTVEC_BASE()
/* Interrupt base for PL0 interrupts */
unsigned long interrupt_vector_base ;
# endif
# if CHIP_HAS_TILE_RTF_HWM()
/* Tile cache retry fifo high-water mark */
unsigned long tile_rtf_hwm ;
# endif
# if CHIP_HAS_DSTREAM_PF()
/* Data stream prefetch control */
unsigned long dstream_pf ;
# endif
arch/tile: Add driver to enable access to the user dynamic network.
This network (the "UDN") connects all the cpus on the chip in a
wormhole-routed dynamic network. Subrectangles of the chip can
be allocated by a "create" ioctl on /dev/hardwall, and then to access the
UDN in that rectangle, tasks must perform an "activate" ioctl on that
same file object after affinitizing themselves to a single cpu in
the region. Sending a wormhole-routed message that tries to leave
that subrectangle causes all activated tasks to receive a SIGILL
(just as they would if they tried to access the UDN without first
activating themselves to a hardwall rectangle).
The original submission of this code to LKML had the driver
instantiated under /proc/tile/hardwall. Now we just use a character
device for this, conventionally /dev/hardwall. Some futures planning
for the TILE-Gx chip suggests that we may want to have other types of
devices that share the general model of "bind a task to a cpu, then
'activate' a file descriptor on a pseudo-device that gives access to
some hardware resource". As such, we are using a device rather
than, for example, a syscall, to set up and activate this code.
As part of this change, the compat_ptr() declaration was fixed and used
to pass the compat_ioctl argument to the normal ioctl. So far we limit
compat code to 2GB, so the difference between zero-extend and sign-extend
(the latter being correct, eventually) had been overlooked.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 17:00:56 -04:00
# ifdef CONFIG_HARDWALL
/* Is this task tied to an activated hardwall? */
struct hardwall_info * hardwall ;
/* Chains this task into the list at hardwall->list. */
struct list_head hardwall_list ;
# endif
2010-05-28 23:09:12 -04:00
# if CHIP_HAS_TILE_DMA()
/* Async DMA TLB fault information */
struct async_tlb dma_async_tlb ;
# endif
# if CHIP_HAS_SN_PROC()
/* Was static network processor when we were switched out? */
int sn_proc_running ;
/* Async SNI TLB fault information */
struct async_tlb sn_async_tlb ;
# endif
} ;
# endif /* !__ASSEMBLY__ */
/*
* Start with " sp " this many bytes below the top of the kernel stack .
* This preserves the invariant that a called function may write to * sp .
*/
# define STACK_TOP_DELTA 8
/*
* When entering the kernel via a fault , start with the top of the
* pt_regs structure this many bytes below the top of the page .
* This aligns the pt_regs structure optimally for cache - line access .
*/
# ifdef __tilegx__
# define KSTK_PTREGS_GAP 48
# else
# define KSTK_PTREGS_GAP 56
# endif
# ifndef __ASSEMBLY__
# ifdef __tilegx__
# define TASK_SIZE_MAX (MEM_LOW_END + 1)
# else
# define TASK_SIZE_MAX PAGE_OFFSET
# endif
/* TASK_SIZE and related variables are always checked in "current" context. */
# ifdef CONFIG_COMPAT
# define COMPAT_TASK_SIZE (1UL << 31)
# define TASK_SIZE ((current_thread_info()->status & TS_COMPAT) ?\
COMPAT_TASK_SIZE : TASK_SIZE_MAX )
# else
# define TASK_SIZE TASK_SIZE_MAX
# endif
/* We provide a minimal "vdso" a la x86; just the sigreturn code for now. */
# define VDSO_BASE (TASK_SIZE - PAGE_SIZE)
# define STACK_TOP VDSO_BASE
/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */
# define STACK_TOP_MAX TASK_SIZE_MAX
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap ' s , if it is using bottom - up mapping .
*/
# define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
# define HAVE_ARCH_PICK_MMAP_LAYOUT
# define INIT_THREAD { \
. ksp = ( unsigned long ) init_stack + THREAD_SIZE - STACK_TOP_DELTA , \
. interrupt_mask = - 1ULL \
}
/* Kernel stack top for the task that first boots on this cpu. */
DECLARE_PER_CPU ( unsigned long , boot_sp ) ;
/* PC to boot from on this cpu. */
DECLARE_PER_CPU ( unsigned long , boot_pc ) ;
/* Do necessary setup to start up a newly executed thread. */
static inline void start_thread ( struct pt_regs * regs ,
unsigned long pc , unsigned long usp )
{
regs - > pc = pc ;
regs - > sp = usp ;
}
/* Free all resources held by a thread. */
static inline void release_thread ( struct task_struct * dead_task )
{
/* Nothing for now */
}
/* Prepare to copy thread state - unlazy all lazy status. */
# define prepare_to_copy(tsk) do { } while (0)
extern int kernel_thread ( int ( * fn ) ( void * ) , void * arg , unsigned long flags ) ;
2011-05-02 14:50:06 -04:00
extern int do_work_pending ( struct pt_regs * regs , u32 flags ) ;
2010-05-28 23:09:12 -04:00
/*
* Return saved ( kernel ) PC of a blocked thread .
* Only used in a printk ( ) in kernel / sched . c , so don ' t work too hard .
*/
# define thread_saved_pc(t) ((t)->thread.pc)
unsigned long get_wchan ( struct task_struct * p ) ;
/* Return initial ksp value for given task. */
# define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE)
/* Return some info about the user process TASK. */
# define KSTK_TOP(task) (task_ksp0(task) - STACK_TOP_DELTA)
# define task_pt_regs(task) \
( ( struct pt_regs * ) ( task_ksp0 ( task ) - KSTK_PTREGS_GAP ) - 1 )
# define task_sp(task) (task_pt_regs(task)->sp)
# define task_pc(task) (task_pt_regs(task)->pc)
/* Aliases for pc and sp (used in fs/proc/array.c) */
# define KSTK_EIP(task) task_pc(task)
# define KSTK_ESP(task) task_sp(task)
/* Standard format for printing registers and other word-size data. */
# ifdef __tilegx__
# define REGFMT "0x%016lx"
# else
# define REGFMT "0x%08lx"
# endif
/*
* Do some slow action ( e . g . read a slow SPR ) .
* Note that this must also have compiler - barrier semantics since
* it may be used in a busy loop reading memory .
*/
static inline void cpu_relax ( void )
{
__insn_mfspr ( SPR_PASS ) ;
barrier ( ) ;
}
arch/tile: Add driver to enable access to the user dynamic network.
This network (the "UDN") connects all the cpus on the chip in a
wormhole-routed dynamic network. Subrectangles of the chip can
be allocated by a "create" ioctl on /dev/hardwall, and then to access the
UDN in that rectangle, tasks must perform an "activate" ioctl on that
same file object after affinitizing themselves to a single cpu in
the region. Sending a wormhole-routed message that tries to leave
that subrectangle causes all activated tasks to receive a SIGILL
(just as they would if they tried to access the UDN without first
activating themselves to a hardwall rectangle).
The original submission of this code to LKML had the driver
instantiated under /proc/tile/hardwall. Now we just use a character
device for this, conventionally /dev/hardwall. Some futures planning
for the TILE-Gx chip suggests that we may want to have other types of
devices that share the general model of "bind a task to a cpu, then
'activate' a file descriptor on a pseudo-device that gives access to
some hardware resource". As such, we are using a device rather
than, for example, a syscall, to set up and activate this code.
As part of this change, the compat_ptr() declaration was fixed and used
to pass the compat_ioctl argument to the normal ioctl. So far we limit
compat code to 2GB, so the difference between zero-extend and sign-extend
(the latter being correct, eventually) had been overlooked.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-25 17:00:56 -04:00
/* Info on this processor (see fs/proc/cpuinfo.c) */
struct seq_operations ;
extern const struct seq_operations cpuinfo_op ;
2010-05-28 23:09:12 -04:00
/* Provide information about the chip model. */
extern char chip_model [ 64 ] ;
/* Data on which physical memory controller corresponds to which NUMA node. */
extern int node_controller [ ] ;
# if CHIP_HAS_CBOX_HOME_MAP()
/* Does the heap allocator return hash-for-home pages by default? */
extern int hash_default ;
/* Should kernel stack pages be hash-for-home? */
extern int kstack_hash ;
2010-07-02 14:19:35 -04:00
/* Does MAP_ANONYMOUS return hash-for-home pages by default? */
# define uheap_hash hash_default
2010-05-28 23:09:12 -04:00
# else
# define hash_default 0
# define kstack_hash 0
2010-07-02 14:19:35 -04:00
# define uheap_hash 0
2010-05-28 23:09:12 -04:00
# endif
/* Are we using huge pages in the TLB for kernel data? */
extern int kdata_huge ;
2010-11-01 17:00:37 -04:00
/* Support standard Linux prefetching. */
# define ARCH_HAS_PREFETCH
# define prefetch(x) __builtin_prefetch(x)
2010-07-02 14:19:35 -04:00
# define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
2010-05-28 23:09:12 -04:00
2010-11-01 17:00:37 -04:00
/* Bring a value into the L1D, faulting the TLB if necessary. */
# ifdef __tilegx__
# define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
# else
# define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
# endif
2010-05-28 23:09:12 -04:00
# else /* __ASSEMBLY__ */
/* Do some slow action (e.g. read a slow SPR). */
# define CPU_RELAX mfspr zero, SPR_PASS
# endif /* !__ASSEMBLY__ */
/* Assembly code assumes that the PL is in the low bits. */
# if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0
# error Fix assembly assumptions about PL
# endif
/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */
# if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \
SPR_EX_CONTEXT_1_1__PL_RMASK ! = SPR_EX_CONTEXT_0_1__PL_RMASK | | \
SPR_EX_CONTEXT_1_1__ICS_SHIFT ! = SPR_EX_CONTEXT_0_1__ICS_SHIFT | | \
SPR_EX_CONTEXT_1_1__ICS_RMASK ! = SPR_EX_CONTEXT_0_1__ICS_RMASK
# error Fix assumptions that EX1 macros work for both PL0 and PL1
# endif
/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */
# define EX1_PL(ex1) \
( ( ( ex1 ) > > SPR_EX_CONTEXT_1_1__PL_SHIFT ) & SPR_EX_CONTEXT_1_1__PL_RMASK )
# define EX1_ICS(ex1) \
( ( ( ex1 ) > > SPR_EX_CONTEXT_1_1__ICS_SHIFT ) & SPR_EX_CONTEXT_1_1__ICS_RMASK )
# define PL_ICS_EX1(pl, ics) \
( ( ( pl ) < < SPR_EX_CONTEXT_1_1__PL_SHIFT ) | \
( ( ics ) < < SPR_EX_CONTEXT_1_1__ICS_SHIFT ) )
/*
* Provide symbolic constants for PLs .
* Note that assembly code assumes that USER_PL is zero .
*/
# define USER_PL 0
2010-10-14 16:23:03 -04:00
# if CONFIG_KERNEL_PL == 2
# define GUEST_PL 1
# endif
# define KERNEL_PL CONFIG_KERNEL_PL
2010-05-28 23:09:12 -04:00
2010-10-14 16:23:03 -04:00
/* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */
2010-05-28 23:09:12 -04:00
# define CPU_LOG_MASK_VALUE 12
# define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
# if CONFIG_NR_CPUS > CPU_MASK_VALUE
# error Too many cpus!
# endif
# define raw_smp_processor_id() \
2010-10-14 16:23:03 -04:00
( ( int ) __insn_mfspr ( SPR_SYSTEM_SAVE_K_0 ) & CPU_MASK_VALUE )
2010-05-28 23:09:12 -04:00
# define get_current_ksp0() \
2010-10-14 16:23:03 -04:00
( __insn_mfspr ( SPR_SYSTEM_SAVE_K_0 ) & ~ CPU_MASK_VALUE )
2010-05-28 23:09:12 -04:00
# define next_current_ksp0(task) ({ \
unsigned long __ksp0 = task_ksp0 ( task ) ; \
int __cpu = raw_smp_processor_id ( ) ; \
BUG_ON ( __ksp0 & CPU_MASK_VALUE ) ; \
__ksp0 | __cpu ; \
} )
# endif /* _ASM_TILE_PROCESSOR_H */