iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/soc/ti/Kconfig

104 lines
3.2 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
# SPDX-License-Identifier: GPL-2.0-only
soc: ti: Add Support for AM654 SoC config option Add option to build AM6 SoC specific components Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benjamin Fair <b-fair@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-06-26 11:26:14 -05:00
soc: ti: add Keystone Navigator QMSS driver The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. The QMSS driver manages the PDSP setups, linking RAM regions, queue pool management (allocation, push, pop and notify) and descriptor pool management. The specifics on the device tree bindings for QMSS can be found in: Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-02-28 10:47:50 -05:00
#
# TI SOC drivers
#
menuconfig SOC_TI
bool "TI SOC drivers support"
if SOC_TI
config KEYSTONE_NAVIGATOR_QMSS
tristate "Keystone Queue Manager Sub System"
depends on ARCH_KEYSTONE
help
Say y here to support the Keystone multicore Navigator Queue
Manager support. The Queue Manager is a hardware module that
is responsible for accelerating management of the packet queues.
Packets are queued/de-queued by writing/reading descriptor address
to a particular memory mapped location in the Queue Manager module.
If unsure, say N.
soc: ti: add Keystone Navigator DMA support The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-03-30 17:29:04 -04:00
config KEYSTONE_NAVIGATOR_DMA
tristate "TI Keystone Navigator Packet DMA support"
depends on ARCH_KEYSTONE
help
Say y tp enable support for the Keystone Navigator Packet DMA on
on Keystone family of devices. It sets up the dma channels for the
Queue Manager Sub System.
If unsure, say N.
soc: ti: Add pm33xx driver for basic suspend support AM335x and AM437x support various low power modes as documented in section 8.1.4.3 of the AM335x Technical Reference Manual and section 6.4.3 of the AM437x Technical Reference Manual. DeepSleep0 mode offers the lowest power mode with limited wakeup sources without a system reboot and is mapped as the suspend state in the kernel. In this state, MPU and PER domains are turned off with the internal RAM held in retention to facilitate the resume process. As part of the boot process, the assembly code is copied over to OCMCRAM so it can be executed to turn of the EMIF and put DDR into self refresh. Both platforms have a Cortex-M3 (WKUP_M3) which assists the MPU in DeepSleep0 entry and exit. WKUP_M3 takes care of the clockdomain and powerdomain transitions based on the intended low power state. MPU needs to load the appropriate WKUP_M3 binary onto the WKUP_M3 memory space before it can leverage any of the PM features like DeepSleep. This loading is handled by the remoteproc driver wkup_m3_rproc. Communication with the WKUP_M3 is handled by a wkup_m3_ipc driver that exposes the specific PM functionality to be used the PM code. In the current implementation when the suspend process is initiated, MPU interrupts the WKUP_M3 to let it know about the intent of entering DeepSleep0 and waits for an ACK. When the ACK is received MPU continues with its suspend process to suspend all the drivers and then jumps to assembly in OCMC RAM. The assembly code puts the external RAM in self-refresh mode, gates the MPU clock, and then finally executes the WFI instruction. Execution of the WFI instruction with MPU clock gated triggers another interrupt to the WKUP_M3 which then continues with the power down sequence wherein the clockdomain and powerdomain transition takes place. As part of the sleep sequence, WKUP_M3 unmasks the interrupt lines for the wakeup sources. WFI execution on WKUP_M3 causes the hardware to disable the main oscillator of the SoC and from here system remains in sleep state until a wake source brings the system into resume path. When a wakeup event occurs, WKUP_M3 starts the power-up sequence by switching on the power domains and finally enabling the clock to MPU. Since the MPU gets powered down as part of the sleep sequence in the resume path ROM code starts executing. The ROM code detects a wakeup from sleep and then jumps to the resume location in OCMC which was populated in one of the IPC registers as part of the suspend sequence. Code is based on work by Vaibhav Bedia. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-23 09:43:57 -06:00
config AMX3_PM
tristate "AMx3 Power Management"
depends on SOC_AM33XX || SOC_AM43XX
soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support During RTC-only suspend, power is lost to the wkup domain, so we need to save and restore the state of that domain. We also need to store some information within the RTC registers so that u-boot can do the right thing at powerup. The state is entered by getting the RTC to bring the pmic_power_en line low which will instruct the PMIC to disable the appropriate power rails after putting DDR into self-refresh mode. To bring pmic_power_en low, we need to get an ALARM2 event. Since we are running from SRAM at that point, it means calculating what the next second is (via ASM) and programming that into the RTC. This patch also adds support for wake up source detection. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 10:27:42 +05:30
depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP
soc: ti: Add pm33xx driver for basic suspend support AM335x and AM437x support various low power modes as documented in section 8.1.4.3 of the AM335x Technical Reference Manual and section 6.4.3 of the AM437x Technical Reference Manual. DeepSleep0 mode offers the lowest power mode with limited wakeup sources without a system reboot and is mapped as the suspend state in the kernel. In this state, MPU and PER domains are turned off with the internal RAM held in retention to facilitate the resume process. As part of the boot process, the assembly code is copied over to OCMCRAM so it can be executed to turn of the EMIF and put DDR into self refresh. Both platforms have a Cortex-M3 (WKUP_M3) which assists the MPU in DeepSleep0 entry and exit. WKUP_M3 takes care of the clockdomain and powerdomain transitions based on the intended low power state. MPU needs to load the appropriate WKUP_M3 binary onto the WKUP_M3 memory space before it can leverage any of the PM features like DeepSleep. This loading is handled by the remoteproc driver wkup_m3_rproc. Communication with the WKUP_M3 is handled by a wkup_m3_ipc driver that exposes the specific PM functionality to be used the PM code. In the current implementation when the suspend process is initiated, MPU interrupts the WKUP_M3 to let it know about the intent of entering DeepSleep0 and waits for an ACK. When the ACK is received MPU continues with its suspend process to suspend all the drivers and then jumps to assembly in OCMC RAM. The assembly code puts the external RAM in self-refresh mode, gates the MPU clock, and then finally executes the WFI instruction. Execution of the WFI instruction with MPU clock gated triggers another interrupt to the WKUP_M3 which then continues with the power down sequence wherein the clockdomain and powerdomain transition takes place. As part of the sleep sequence, WKUP_M3 unmasks the interrupt lines for the wakeup sources. WFI execution on WKUP_M3 causes the hardware to disable the main oscillator of the SoC and from here system remains in sleep state until a wake source brings the system into resume path. When a wakeup event occurs, WKUP_M3 starts the power-up sequence by switching on the power domains and finally enabling the clock to MPU. Since the MPU gets powered down as part of the sleep sequence in the resume path ROM code starts executing. The ROM code detects a wakeup from sleep and then jumps to the resume location in OCMC which was populated in one of the IPC registers as part of the suspend sequence. Code is based on work by Vaibhav Bedia. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-23 09:43:57 -06:00
help
Enable power management on AM335x and AM437x. Required for suspend to mem
and standby states on both AM335x and AM437x platforms and for deeper cpuidle
soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support During RTC-only suspend, power is lost to the wkup domain, so we need to save and restore the state of that domain. We also need to store some information within the RTC registers so that u-boot can do the right thing at powerup. The state is entered by getting the RTC to bring the pmic_power_en line low which will instruct the PMIC to disable the appropriate power rails after putting DDR into self-refresh mode. To bring pmic_power_en low, we need to get an ALARM2 event. Since we are running from SRAM at that point, it means calculating what the next second is (via ASM) and programming that into the RTC. This patch also adds support for wake up source detection. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 10:27:42 +05:30
c-states on AM335x. Also required for rtc and ddr in self-refresh low
power mode on AM437x platforms.
soc: ti: Add pm33xx driver for basic suspend support AM335x and AM437x support various low power modes as documented in section 8.1.4.3 of the AM335x Technical Reference Manual and section 6.4.3 of the AM437x Technical Reference Manual. DeepSleep0 mode offers the lowest power mode with limited wakeup sources without a system reboot and is mapped as the suspend state in the kernel. In this state, MPU and PER domains are turned off with the internal RAM held in retention to facilitate the resume process. As part of the boot process, the assembly code is copied over to OCMCRAM so it can be executed to turn of the EMIF and put DDR into self refresh. Both platforms have a Cortex-M3 (WKUP_M3) which assists the MPU in DeepSleep0 entry and exit. WKUP_M3 takes care of the clockdomain and powerdomain transitions based on the intended low power state. MPU needs to load the appropriate WKUP_M3 binary onto the WKUP_M3 memory space before it can leverage any of the PM features like DeepSleep. This loading is handled by the remoteproc driver wkup_m3_rproc. Communication with the WKUP_M3 is handled by a wkup_m3_ipc driver that exposes the specific PM functionality to be used the PM code. In the current implementation when the suspend process is initiated, MPU interrupts the WKUP_M3 to let it know about the intent of entering DeepSleep0 and waits for an ACK. When the ACK is received MPU continues with its suspend process to suspend all the drivers and then jumps to assembly in OCMC RAM. The assembly code puts the external RAM in self-refresh mode, gates the MPU clock, and then finally executes the WFI instruction. Execution of the WFI instruction with MPU clock gated triggers another interrupt to the WKUP_M3 which then continues with the power down sequence wherein the clockdomain and powerdomain transition takes place. As part of the sleep sequence, WKUP_M3 unmasks the interrupt lines for the wakeup sources. WFI execution on WKUP_M3 causes the hardware to disable the main oscillator of the SoC and from here system remains in sleep state until a wake source brings the system into resume path. When a wakeup event occurs, WKUP_M3 starts the power-up sequence by switching on the power domains and finally enabling the clock to MPU. Since the MPU gets powered down as part of the sleep sequence in the resume path ROM code starts executing. The ROM code detects a wakeup from sleep and then jumps to the resume location in OCMC which was populated in one of the IPC registers as part of the suspend sequence. Code is based on work by Vaibhav Bedia. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-23 09:43:57 -06:00
soc: ti: Add wkup_m3_ipc driver Introduce a wkup_m3_ipc driver to handle communication between the MPU and Cortex M3 wkup_m3 present on am335x. This driver is responsible for actually booting the wkup_m3_rproc and also handling all IPC which is done using the IPC registers in the control module, a mailbox, and a separate interrupt back from the wkup_m3. A small API is exposed for executing specific power commands, which include configuring for low power mode, request a transition to a low power mode, and status info on a previous transition. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-22 19:14:54 -05:00
config WKUP_M3_IPC
tristate "TI AMx3 Wkup-M3 IPC Driver"
depends on WKUP_M3_RPROC
depends on OMAP2PLUS_MBOX
help
TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
low power transitions. This IPC driver provides the necessary API
to communicate and use the Wakeup M3 for PM features like suspend
resume and boots it using wkup_m3_rproc driver.
soc: ti: Add ti_sci_pm_domains driver Introduce a ti_sci_pm_domains driver to act as a generic pm domain provider to allow each device to attach and associate it's ti-sci-id so that it can be controlled through the TI SCI protocol. This driver implements a simple genpd where each device node has a phandle to the power domain node and also must provide an index which represents the ID to be passed with TI SCI representing the device using a single phandle cell. The driver manually parses the phandle to get the cell value. Through this interface the genpd dev_ops start and stop hooks will use TI SCI to turn on and off each device as determined by pm_runtime usage. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-04-04 08:59:27 -07:00
config TI_SCI_PM_DOMAINS
tristate "TI SCI PM Domains Driver"
depends on TI_SCI_PROTOCOL
depends on PM_GENERIC_DOMAINS
help
Generic power domain implementation for TI device implementing
the TI SCI protocol.
To compile this as a module, choose M here. The module will be
called ti_sci_pm_domains. Note this is needed early in boot before
rootfs may be available.
soc: ti: k3: add navss ringacc driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. The RINGACC converts constant-address read and write accesses to equivalent read or write accesses to a circular data structure in memory. The RINGACC eliminates the need for each DMA controller which needs to access ring elements from having to know the current state of the ring (base address, current offset). The DMA controller performs a read or write access to a specific address range (which maps to the source interface on the RINGACC) and the RINGACC replaces the address for the transaction with a new address which corresponds to the head or tail element of the ring (head for reads, tail for writes). Since the RINGACC maintains the state, multiple DMA controllers or channels are allowed to coherently share the same rings as applicable. The RINGACC is able to place data which is destined towards software into cached memory directly. Supported ring modes: - Ring Mode - Messaging Mode - Credentials Mode - Queue Manager Mode TI-SCI integration: Texas Instrument's System Control Interface (TI-SCI) Message Protocol now has control over Ringacc module resources management (RM) and Rings configuration. The corresponding support of TI-SCI Ringacc module RM protocol introduced as option through DT parameters: - ti,sci: phandle on TI-SCI firmware controller DT node - ti,sci-dev-id: TI-SCI device identifier as per TI-SCI firmware spec if both parameters present - Ringacc driver will configure/free/reset Rings using TI-SCI Message Ringacc RM Protocol. The Ringacc driver manages Rings allocation by itself now and requests TI-SCI firmware to allocate and configure specific Rings only. It's done this way because, Linux driver implements two stage Rings allocation and configuration (allocate ring and configure ring) while TI-SCI Message Protocol supports only one combined operation (allocate+configure). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-01-15 10:07:27 -08:00
config TI_K3_RINGACC
bool "K3 Ring accelerator Sub System"
depends on ARCH_K3 || COMPILE_TEST
depends on TI_SCI_INTA_IRQCHIP
help
Say y here to support the K3 Ring accelerator module.
The Ring Accelerator (RINGACC or RA) provides hardware acceleration
to enable straightforward passing of work between a producer
and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
If unsure, say N.
soc: ti: add k3 platforms chipid module driver The Texas Instruments K3 Multicore SoC platforms have chipid module which is represented by CTRLMMR_xxx_JTAGID register and contains information about SoC id and revision. Bits: 31-28 VARIANT Device variant 27-12 PARTNO Part number 11-1 MFG Indicates TI as manufacturer (0x17) 1 Always 1 This patch adds corresponding driver to identify the TI K3 SoC family and revision, and registers this information with the SoC bus. It is available under /sys/devices/soc0/ for user space, and can be checked, where needed, in Kernel using soc_device_match(). Identification is done by: - checking MFG to be TI ID - retrieving Device variant (revision) - retrieving Part number and convert it to the family - retrieving machine from DT "/model" Example J721E: # cat /sys/devices/soc0/{machine,family,revision} Texas Instruments K3 J721E SoC J721E SR1.0 Example AM65x: # cat /sys/devices/soc0/{machine,family,revision} Texas Instruments AM654 Base Board AM65X SR1.0 Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-05-27 20:39:14 -07:00
config TI_K3_SOCINFO
bool
depends on ARCH_K3 || COMPILE_TEST
select SOC_BUS
select MFD_SYSCON
help
Include support for the SoC bus socinfo for the TI K3 Multicore SoC
platforms to provide information about the SoC family and
variant to user space.
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs The Programmable Real-Time Unit - Industrial Communication Subsystem (PRU-ICSS) is present on various TI SoCs such as AM335x or AM437x or the Keystone 66AK2G. Each SoC can have one or more PRUSS instances that may or may not be identical. For example, AM335x SoCs have a single PRUSS, while AM437x has two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being a cut-down version of the PRUSS1. The PRUSS consists of dual 32-bit RISC cores called the Programmable Real-Time Units (PRUs), some shared, data and instruction memories, some internal peripheral modules, and an interrupt controller. The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. The PRU-ICSS functionality is achieved through three different platform drivers addressing a specific portion of the PRUSS. Some sub-modules of the PRU-ICSS IP reuse some of the existing drivers (like davinci mdio driver or the generic syscon driver). This design provides flexibility in representing the different modules of PRUSS accordingly, and at the same time allowing the PRUSS driver to add some instance specific configuration within an SoC. The PRUSS platform driver deals with the overall PRUSS and is used for managing the subsystem level resources like various memories and the CFG module. It is responsible for the creation and deletion of the platform devices for the child PRU devices and other child devices (like Interrupt Controller, MDIO node and some syscon nodes) so that they can be managed by specific platform drivers. The PRUSS interrupt controller is managed by an irqchip driver, while the individual PRU RISC cores are managed by a PRU remoteproc driver. The driver currently supports the AM335x SoC, and support for other TI SoCs will be added in subsequent patches. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:43:34 -07:00
config TI_PRUSS
tristate "TI PRU-ICSS Subsystem Platform drivers"
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs The K3 AM65x family of SoCs have the next generation of the PRU-ICSS processor subsystem capable of supporting Gigabit Ethernet, and is commonly referred to as ICSSG. These SoCs contain typically three ICSSG instances named ICSSG0, ICSSG1 and ICSSG2. The three ICSSGs are identical to each other for the most part with minor SoC integration differences and capabilities. The ICSSG2 supports slightly enhanced features like SGMII mode Ethernet, while the ICSS0 and ICSSG1 instances are limited to MII mode only. The ICSSGs on K3 AM65x SoCs are in general super-sets of the PRUSS on the AM57xx/66AK2G SoCs. They include two additional auxiliary PRU cores called RTUs and few other additional sub-modules. The interrupt integration is also different on the K3 AM65x SoCs and are propagated through various SoC-level Interrupt Router and Interrupt Aggregator blocks. Other IP level differences include different constant tables, differences in system event interrupt input sources etc. They also do not have a programmable module reset line like those present on AM33xx/AM43xx SoCs. The modules are reset just like any other IP with the SoC's global cold/warm resets. The existing pruss platform driver has been updated to support these new ICSSG instances through new AM65x specific compatibles. A build dependency with ARCH_K3 is added to enable building all the existing PRUSS platform drivers for this ARMv8 platform. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:43:36 -07:00
depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs The Programmable Real-Time Unit - Industrial Communication Subsystem (PRU-ICSS) is present on various TI SoCs such as AM335x or AM437x or the Keystone 66AK2G. Each SoC can have one or more PRUSS instances that may or may not be identical. For example, AM335x SoCs have a single PRUSS, while AM437x has two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being a cut-down version of the PRUSS1. The PRUSS consists of dual 32-bit RISC cores called the Programmable Real-Time Units (PRUs), some shared, data and instruction memories, some internal peripheral modules, and an interrupt controller. The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. The PRU-ICSS functionality is achieved through three different platform drivers addressing a specific portion of the PRUSS. Some sub-modules of the PRU-ICSS IP reuse some of the existing drivers (like davinci mdio driver or the generic syscon driver). This design provides flexibility in representing the different modules of PRUSS accordingly, and at the same time allowing the PRUSS driver to add some instance specific configuration within an SoC. The PRUSS platform driver deals with the overall PRUSS and is used for managing the subsystem level resources like various memories and the CFG module. It is responsible for the creation and deletion of the platform devices for the child PRU devices and other child devices (like Interrupt Controller, MDIO node and some syscon nodes) so that they can be managed by specific platform drivers. The PRUSS interrupt controller is managed by an irqchip driver, while the individual PRU RISC cores are managed by a PRU remoteproc driver. The driver currently supports the AM335x SoC, and support for other TI SoCs will be added in subsequent patches. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2020-09-11 21:43:34 -07:00
select MFD_SYSCON
help
TI PRU-ICSS Subsystem platform specific support.
Say Y or M here to support the Programmable Realtime Unit (PRU)
processors on various TI SoCs. It's safe to say N here if you're
not interested in the PRU or if you are unsure.
soc: ti: fix irq-ti-sci link error The irqchip driver depends on the SoC specific driver, but we want to be able to compile-test it elsewhere: WARNING: unmet direct dependencies detected for TI_SCI_INTA_MSI_DOMAIN Depends on [n]: SOC_TI [=n] Selected by [y]: - TI_SCI_INTA_IRQCHIP [=y] && TI_SCI_PROTOCOL [=y] drivers/irqchip/irq-ti-sci-inta.o: In function `ti_sci_inta_irq_domain_probe': irq-ti-sci-inta.c:(.text+0x204): undefined reference to `ti_sci_inta_msi_create_irq_domain' Rearrange the Kconfig and Makefile so we build the soc driver whenever its users are there, regardless of the SOC_TI option. Fixes: 49b323157bf1 ("soc: ti: Add MSI domain bus support for Interrupt Aggregator") Fixes: f011df6179bd ("irqchip/ti-sci-inta: Add msi domain support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 15:01:05 +02:00
endif # SOC_TI
soc: ti: Add MSI domain bus support for Interrupt Aggregator With the system coprocessor managing the range allocation of the inputs to Interrupt Aggregator, it is difficult to represent the device IRQs from DT. The suggestion is to use MSI in such cases where devices wants to allocate and group interrupts dynamically. Create a MSI domain bus layer that allocates and frees MSIs for a device. APIs that are implemented: - ti_sci_inta_msi_create_irq_domain() that creates a MSI domain - ti_sci_inta_msi_domain_alloc_irqs() that creates MSIs for the specified device and resource. - ti_sci_inta_msi_domain_free_irqs() frees the irqs attached to the device. - ti_sci_inta_msi_get_virq() for getting the virq attached to a specific event. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-30 15:42:28 +05:30
config TI_SCI_INTA_MSI_DOMAIN
bool
select GENERIC_MSI_IRQ_DOMAIN
help
Driver to enable Interrupt Aggregator specific MSI Domain.
Reference in New Issue Copy Permalink