linux/drivers/cpuidle/cpuidle-exynos.c

144 lines
3.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
/*
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
* Coupled cpuidle support based on the work of:
* Colin Cross <ccross@android.com>
* Daniel Lezcano <daniel.lezcano@linaro.org>
*/
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/platform_device.h>
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
#include <linux/of.h>
#include <linux/platform_data/cpuidle-exynos.h>
#include <asm/suspend.h>
#include <asm/cpuidle.h>
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
static atomic_t exynos_idle_barrier;
static struct cpuidle_exynos_data *exynos_cpuidle_pdata;
static void (*exynos_enter_aftr)(void);
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
static int exynos_enter_coupled_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
int ret;
exynos_cpuidle_pdata->pre_enter_aftr();
/*
* Waiting all cpus to reach this point at the same moment
*/
cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
/*
* Both cpus will reach this point at the same time
*/
ret = dev->cpu ? exynos_cpuidle_pdata->cpu1_powerdown()
: exynos_cpuidle_pdata->cpu0_enter_aftr();
if (ret)
index = ret;
/*
* Waiting all cpus to finish the power sequence before going further
*/
cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
exynos_cpuidle_pdata->post_enter_aftr();
return index;
}
static int exynos_enter_lowpower(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
int new_index = index;
/* AFTR can only be entered when cores other than CPU0 are offline */
if (num_online_cpus() > 1 || dev->cpu != 0)
new_index = drv->safe_state_index;
if (new_index == 0)
return arm_cpuidle_simple_enter(dev, drv, new_index);
exynos_enter_aftr();
return new_index;
}
static struct cpuidle_driver exynos_idle_driver = {
.name = "exynos_idle",
.owner = THIS_MODULE,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE,
[1] = {
.enter = exynos_enter_lowpower,
.exit_latency = 300,
cpuidle: exynos: Unify target residency for AFTR and coupled AFTR states Since commit 45f1ff59e27c ("cpuidle: Return nohz hint from cpuidle_select()") Exynos CPUidle driver stopped entering C1 (AFTR) mode on Exynos4412-based Trats2 board. Further analysis revealed that the CPUidle framework changed the way it handles predicted timer ticks and reported target residency for the given idle states. As a result, the C1 (AFTR) state was not chosen anymore on completely idle device. The main issue was to high target residency value. The similar C1 (AFTR) state for 'coupled' CPUidle version used 10 times lower value for the target residency, despite the fact that it is the same state from the hardware perspective. The 100000us value for standard C1 (AFTR) mode is there from the begining of the support for this idle state, added by the commit 67173ca492ab ("ARM: EXYNOS: Add support AFTR mode on EXYNOS4210"). That commit doesn't give any reason for it, instead it looks like it was blindly copied from the WFI/IDLE state of the same driver that time. That time, that value was probably not really used by the framework for any critical decision, so it didn't matter that much. Now it turned out to be an issue, so unify the target residency with the 'coupled' version, as it seems to better match the real use case values and restores the operation of the Exynos CPUidle driver on the idle device. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-28 16:33:58 +03:00
.target_residency = 10000,
.name = "C1",
.desc = "ARM power down",
},
},
.state_count = 2,
.safe_state_index = 0,
};
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
static struct cpuidle_driver exynos_coupled_idle_driver = {
.name = "exynos_coupled_idle",
.owner = THIS_MODULE,
.states = {
[0] = ARM_CPUIDLE_WFI_STATE,
[1] = {
.enter = exynos_enter_coupled_lowpower,
.exit_latency = 5000,
.target_residency = 10000,
.flags = CPUIDLE_FLAG_COUPLED |
CPUIDLE_FLAG_TIMER_STOP,
.name = "C1",
.desc = "ARM power down",
},
},
.state_count = 2,
.safe_state_index = 0,
};
static int exynos_cpuidle_probe(struct platform_device *pdev)
{
int ret;
if (IS_ENABLED(CONFIG_SMP) &&
(of_machine_is_compatible("samsung,exynos4210") ||
of_machine_is_compatible("samsung,exynos3250"))) {
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 08:05:50 +03:00
exynos_cpuidle_pdata = pdev->dev.platform_data;
ret = cpuidle_register(&exynos_coupled_idle_driver,
cpu_possible_mask);
} else {
exynos_enter_aftr = (void *)(pdev->dev.platform_data);
ret = cpuidle_register(&exynos_idle_driver, NULL);
}
if (ret) {
dev_err(&pdev->dev, "failed to register cpuidle driver\n");
return ret;
}
return 0;
}
static struct platform_driver exynos_cpuidle_driver = {
.probe = exynos_cpuidle_probe,
.driver = {
.name = "exynos_cpuidle",
},
};
builtin_platform_driver(exynos_cpuidle_driver);