linux/drivers/s390/crypto/vfio_ap_ops.c

1503 lines
40 KiB
C
Raw Normal View History

2018-09-25 19:16:20 -04:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Adjunct processor matrix VFIO device driver callbacks.
*
* Copyright IBM Corp. 2018
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
* Halil Pasic <pasic@linux.ibm.com>
* Pierre Morel <pmorel@linux.ibm.com>
*/
#include <linux/string.h>
#include <linux/vfio.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/ctype.h>
#include <linux/bitops.h>
#include <linux/kvm_host.h>
#include <linux/module.h>
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
#include <linux/uuid.h>
#include <asm/kvm.h>
2018-09-25 19:16:20 -04:00
#include <asm/zcrypt.h>
#include "vfio_ap_private.h"
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
#include "vfio_ap_debug.h"
2018-09-25 19:16:20 -04:00
#define VFIO_AP_MDEV_TYPE_HWVIRT "passthrough"
#define VFIO_AP_MDEV_NAME_HWVIRT "VFIO AP Passthrough Device"
static int vfio_ap_mdev_reset_queues(struct ap_matrix_mdev *matrix_mdev);
static struct vfio_ap_queue *vfio_ap_find_queue(int apqn);
static const struct vfio_device_ops vfio_ap_matrix_dev_ops;
Driver Core and debugfs changes for 5.3-rc1 Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Because of this, there is going to be some merge issues with your tree at the moment, I'll follow up with the expected resolutions to make it easier for you. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups (will cause build warnings with s390 and coresight drivers in your tree) - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for. Other than the merge issues, functionality is working properly in linux-next :) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSgpnQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykcwgCfS30OR4JmwZydWGJ7zK/cHqk+KjsAnjOxjC1K LpRyb3zX29oChFaZkc5a =XrEZ -----END PGP SIGNATURE----- Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-12 12:24:03 -07:00
static int match_apqn(struct device *dev, const void *data)
{
struct vfio_ap_queue *q = dev_get_drvdata(dev);
return (q->apqn == *(int *)(data)) ? 1 : 0;
}
/**
* vfio_ap_get_queue - retrieve a queue with a specific APQN from a list
* @matrix_mdev: the associated mediated matrix
* @apqn: The queue APQN
*
* Retrieve a queue with a specific APQN from the list of the
* devices of the vfio_ap_drv.
* Verify that the APID and the APQI are set in the matrix.
*
* Return: the pointer to the associated vfio_ap_queue
*/
static struct vfio_ap_queue *vfio_ap_get_queue(
struct ap_matrix_mdev *matrix_mdev,
int apqn)
{
struct vfio_ap_queue *q;
if (!test_bit_inv(AP_QID_CARD(apqn), matrix_mdev->matrix.apm))
return NULL;
if (!test_bit_inv(AP_QID_QUEUE(apqn), matrix_mdev->matrix.aqm))
return NULL;
q = vfio_ap_find_queue(apqn);
if (q)
q->matrix_mdev = matrix_mdev;
return q;
}
/**
* vfio_ap_wait_for_irqclear - clears the IR bit or gives up after 5 tries
* @apqn: The AP Queue number
*
* Checks the IRQ bit for the status of this APQN using ap_tapq.
* Returns if the ap_tapq function succeeded and the bit is clear.
* Returns if ap_tapq function failed with invalid, deconfigured or
* checkstopped AP.
* Otherwise retries up to 5 times after waiting 20ms.
*/
static void vfio_ap_wait_for_irqclear(int apqn)
{
struct ap_queue_status status;
int retry = 5;
do {
status = ap_tapq(apqn, NULL);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
if (!status.irq_enabled)
return;
fallthrough;
case AP_RESPONSE_BUSY:
msleep(20);
break;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
WARN_ONCE(1, "%s: tapq rc %02x: %04x\n", __func__,
status.response_code, apqn);
return;
}
} while (--retry);
WARN_ONCE(1, "%s: tapq rc %02x: %04x could not clear IR bit\n",
__func__, status.response_code, apqn);
}
/**
* vfio_ap_free_aqic_resources - free vfio_ap_queue resources
* @q: The vfio_ap_queue
*
* Unregisters the ISC in the GIB when the saved ISC not invalid.
* Unpins the guest's page holding the NIB when it exists.
* Resets the saved_pfn and saved_isc to invalid values.
*/
static void vfio_ap_free_aqic_resources(struct vfio_ap_queue *q)
{
if (!q)
return;
if (q->saved_isc != VFIO_AP_ISC_INVALID &&
!WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm))) {
kvm_s390_gisc_unregister(q->matrix_mdev->kvm, q->saved_isc);
q->saved_isc = VFIO_AP_ISC_INVALID;
}
if (q->saved_pfn && !WARN_ON(!q->matrix_mdev)) {
vfio_unpin_pages(&q->matrix_mdev->vdev, &q->saved_pfn, 1);
q->saved_pfn = 0;
}
}
/**
* vfio_ap_irq_disable - disables and clears an ap_queue interrupt
* @q: The vfio_ap_queue
*
* Uses ap_aqic to disable the interruption and in case of success, reset
* in progress or IRQ disable command already proceeded: calls
* vfio_ap_wait_for_irqclear() to check for the IRQ bit to be clear
* and calls vfio_ap_free_aqic_resources() to free the resources associated
* with the AP interrupt handling.
*
* In the case the AP is busy, or a reset is in progress,
* retries after 20ms, up to 5 times.
*
* Returns if ap_aqic function failed with invalid, deconfigured or
* checkstopped AP.
*
* Return: &struct ap_queue_status
*/
static struct ap_queue_status vfio_ap_irq_disable(struct vfio_ap_queue *q)
{
struct ap_qirq_ctrl aqic_gisa = {};
struct ap_queue_status status;
int retries = 5;
do {
status = ap_aqic(q->apqn, aqic_gisa, NULL);
switch (status.response_code) {
case AP_RESPONSE_OTHERWISE_CHANGED:
case AP_RESPONSE_NORMAL:
vfio_ap_wait_for_irqclear(q->apqn);
goto end_free;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
msleep(20);
break;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_INVALID_ADDRESS:
default:
/* All cases in default means AP not operational */
WARN_ONCE(1, "%s: ap_aqic status %d\n", __func__,
status.response_code);
goto end_free;
}
} while (retries--);
WARN_ONCE(1, "%s: ap_aqic status %d\n", __func__,
status.response_code);
end_free:
vfio_ap_free_aqic_resources(q);
q->matrix_mdev = NULL;
return status;
}
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
/**
* vfio_ap_validate_nib - validate a notification indicator byte (nib) address.
*
* @vcpu: the object representing the vcpu executing the PQAP(AQIC) instruction.
* @nib: the location for storing the nib address.
* @g_pfn: the location for storing the page frame number of the page containing
* the nib.
*
* When the PQAP(AQIC) instruction is executed, general register 2 contains the
* address of the notification indicator byte (nib) used for IRQ notification.
* This function parses the nib from gr2 and calculates the page frame
* number for the guest of the page containing the nib. The values are
* stored in @nib and @g_pfn respectively.
*
* The g_pfn of the nib is then validated to ensure the nib address is valid.
*
* Return: returns zero if the nib address is a valid; otherwise, returns
* -EINVAL.
*/
static int vfio_ap_validate_nib(struct kvm_vcpu *vcpu, unsigned long *nib,
unsigned long *g_pfn)
{
*nib = vcpu->run->s.regs.gprs[2];
*g_pfn = *nib >> PAGE_SHIFT;
if (kvm_is_error_hva(gfn_to_hva(vcpu->kvm, *g_pfn)))
return -EINVAL;
return 0;
}
/**
* vfio_ap_irq_enable - Enable Interruption for a APQN
*
* @q: the vfio_ap_queue holding AQIC parameters
* @isc: the guest ISC to register with the GIB interface
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
* @vcpu: the vcpu object containing the registers specifying the parameters
* passed to the PQAP(AQIC) instruction.
*
* Pin the NIB saved in *q
* Register the guest ISC to GIB interface and retrieve the
* host ISC to issue the host side PQAP/AQIC
*
* Response.status may be set to AP_RESPONSE_INVALID_ADDRESS in case the
* vfio_pin_pages failed.
*
* Otherwise return the ap_queue_status returned by the ap_aqic(),
* all retry handling will be done by the guest.
*
* Return: &struct ap_queue_status
*/
static struct ap_queue_status vfio_ap_irq_enable(struct vfio_ap_queue *q,
int isc,
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
struct kvm_vcpu *vcpu)
{
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
unsigned long nib;
struct ap_qirq_ctrl aqic_gisa = {};
struct ap_queue_status status = {};
struct kvm_s390_gisa *gisa;
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
int nisc;
struct kvm *kvm;
unsigned long h_nib, g_pfn, h_pfn;
int ret;
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
/* Verify that the notification indicator byte address is valid */
if (vfio_ap_validate_nib(vcpu, &nib, &g_pfn)) {
VFIO_AP_DBF_WARN("%s: invalid NIB address: nib=%#lx, g_pfn=%#lx, apqn=%#04x\n",
__func__, nib, g_pfn, q->apqn);
status.response_code = AP_RESPONSE_INVALID_ADDRESS;
return status;
}
ret = vfio_pin_pages(&q->matrix_mdev->vdev, &g_pfn, 1,
IOMMU_READ | IOMMU_WRITE, &h_pfn);
switch (ret) {
case 1:
break;
default:
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
VFIO_AP_DBF_WARN("%s: vfio_pin_pages failed: rc=%d,"
"nib=%#lx, g_pfn=%#lx, apqn=%#04x\n",
__func__, ret, nib, g_pfn, q->apqn);
status.response_code = AP_RESPONSE_INVALID_ADDRESS;
return status;
}
kvm = q->matrix_mdev->kvm;
gisa = kvm->arch.gisa_int.origin;
h_nib = (h_pfn << PAGE_SHIFT) | (nib & ~PAGE_MASK);
aqic_gisa.gisc = isc;
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
nisc = kvm_s390_gisc_register(kvm, isc);
if (nisc < 0) {
VFIO_AP_DBF_WARN("%s: gisc registration failed: nisc=%d, isc=%d, apqn=%#04x\n",
__func__, nisc, isc, q->apqn);
status.response_code = AP_RESPONSE_INVALID_GISA;
return status;
}
aqic_gisa.isc = nisc;
aqic_gisa.ir = 1;
aqic_gisa.gisa = (uint64_t)gisa >> 4;
status = ap_aqic(q->apqn, aqic_gisa, (void *)h_nib);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
/* See if we did clear older IRQ configuration */
vfio_ap_free_aqic_resources(q);
q->saved_pfn = g_pfn;
q->saved_isc = isc;
break;
case AP_RESPONSE_OTHERWISE_CHANGED:
/* We could not modify IRQ setings: clear new configuration */
vfio_unpin_pages(&q->matrix_mdev->vdev, &g_pfn, 1);
kvm_s390_gisc_unregister(kvm, isc);
break;
default:
pr_warn("%s: apqn %04x: response: %02x\n", __func__, q->apqn,
status.response_code);
vfio_ap_irq_disable(q);
break;
}
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
if (status.response_code != AP_RESPONSE_NORMAL) {
VFIO_AP_DBF_WARN("%s: PQAP(AQIC) failed with status=%#02x: "
"zone=%#x, ir=%#x, gisc=%#x, f=%#x,"
"gisa=%#x, isc=%#x, apqn=%#04x\n",
__func__, status.response_code,
aqic_gisa.zone, aqic_gisa.ir, aqic_gisa.gisc,
aqic_gisa.gf, aqic_gisa.gisa, aqic_gisa.isc,
q->apqn);
}
return status;
}
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
/**
* vfio_ap_le_guid_to_be_uuid - convert a little endian guid array into an array
* of big endian elements that can be passed by
* value to an s390dbf sprintf event function to
* format a UUID string.
*
* @guid: the object containing the little endian guid
* @uuid: a six-element array of long values that can be passed by value as
* arguments for a formatting string specifying a UUID.
*
* The S390 Debug Feature (s390dbf) allows the use of "%s" in the sprintf
* event functions if the memory for the passed string is available as long as
* the debug feature exists. Since a mediated device can be removed at any
* time, it's name can not be used because %s passes the reference to the string
* in memory and the reference will go stale once the device is removed .
*
* The s390dbf string formatting function allows a maximum of 9 arguments for a
* message to be displayed in the 'sprintf' view. In order to use the bytes
* comprising the mediated device's UUID to display the mediated device name,
* they will have to be converted into an array whose elements can be passed by
* value to sprintf. For example:
*
* guid array: { 83, 78, 17, 62, bb, f1, f0, 47, 91, 4d, 32, a2, 2e, 3a, 88, 04 }
* mdev name: 62177883-f1bb-47f0-914d-32a22e3a8804
* array returned: { 62177883, f1bb, 47f0, 914d, 32a2, 2e3a8804 }
* formatting string: "%08lx-%04lx-%04lx-%04lx-%02lx%04lx"
*/
static void vfio_ap_le_guid_to_be_uuid(guid_t *guid, unsigned long *uuid)
{
/*
* The input guid is ordered in little endian, so it needs to be
* reordered for displaying a UUID as a string. This specifies the
* guid indices in proper order.
*/
uuid[0] = le32_to_cpup((__le32 *)guid);
uuid[1] = le16_to_cpup((__le16 *)&guid->b[4]);
uuid[2] = le16_to_cpup((__le16 *)&guid->b[6]);
uuid[3] = *((__u16 *)&guid->b[8]);
uuid[4] = *((__u16 *)&guid->b[10]);
uuid[5] = *((__u32 *)&guid->b[12]);
}
/**
* handle_pqap - PQAP instruction callback
*
* @vcpu: The vcpu on which we received the PQAP instruction
*
* Get the general register contents to initialize internal variables.
* REG[0]: APQN
* REG[1]: IR and ISC
* REG[2]: NIB
*
* Response.status may be set to following Response Code:
* - AP_RESPONSE_Q_NOT_AVAIL: if the queue is not available
* - AP_RESPONSE_DECONFIGURED: if the queue is not configured
* - AP_RESPONSE_NORMAL (0) : in case of successs
* Check vfio_ap_setirq() and vfio_ap_clrirq() for other possible RC.
* We take the matrix_dev lock to ensure serialization on queues and
* mediated device access.
*
* Return: 0 if we could handle the request inside KVM.
* Otherwise, returns -EOPNOTSUPP to let QEMU handle the fault.
*/
static int handle_pqap(struct kvm_vcpu *vcpu)
{
uint64_t status;
uint16_t apqn;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
unsigned long uuid[6];
struct vfio_ap_queue *q;
struct ap_queue_status qstatus = {
.response_code = AP_RESPONSE_Q_NOT_AVAIL, };
struct ap_matrix_mdev *matrix_mdev;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
apqn = vcpu->run->s.regs.gprs[0] & 0xffff;
/* If we do not use the AIV facility just go to userland */
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
if (!(vcpu->arch.sie_block->eca & ECA_AIV)) {
VFIO_AP_DBF_WARN("%s: AIV facility not installed: apqn=0x%04x, eca=0x%04x\n",
__func__, apqn, vcpu->arch.sie_block->eca);
return -EOPNOTSUPP;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
}
mutex_lock(&matrix_dev->lock);
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
if (!vcpu->kvm->arch.crypto.pqap_hook) {
VFIO_AP_DBF_WARN("%s: PQAP(AQIC) hook not registered with the vfio_ap driver: apqn=0x%04x\n",
__func__, apqn);
goto out_unlock;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
}
matrix_mdev = container_of(vcpu->kvm->arch.crypto.pqap_hook,
struct ap_matrix_mdev, pqap_hook);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
/* If the there is no guest using the mdev, there is nothing to do */
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
if (!matrix_mdev->kvm) {
vfio_ap_le_guid_to_be_uuid(&matrix_mdev->mdev->uuid, uuid);
VFIO_AP_DBF_WARN("%s: mdev %08lx-%04lx-%04lx-%04lx-%04lx%08lx not in use: apqn=0x%04x\n",
__func__, uuid[0], uuid[1], uuid[2],
uuid[3], uuid[4], uuid[5], apqn);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto out_unlock;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
}
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
q = vfio_ap_get_queue(matrix_mdev, apqn);
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
if (!q) {
VFIO_AP_DBF_WARN("%s: Queue %02x.%04x not bound to the vfio_ap driver\n",
__func__, AP_QID_CARD(apqn),
AP_QID_QUEUE(apqn));
goto out_unlock;
s390/vfio-ap: add s390dbf logging to the handle_pqap function This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-04 16:41:37 -04:00
}
status = vcpu->run->s.regs.gprs[1];
/* If IR bit(16) is set we enable the interrupt */
if ((status >> (63 - 16)) & 0x01)
s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable function This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-01-04 15:44:13 -05:00
qstatus = vfio_ap_irq_enable(q, status & 0x07, vcpu);
else
qstatus = vfio_ap_irq_disable(q);
out_unlock:
memcpy(&vcpu->run->s.regs.gprs[1], &qstatus, sizeof(qstatus));
vcpu->run->s.regs.gprs[1] >>= 32;
mutex_unlock(&matrix_dev->lock);
return 0;
}
2018-09-25 19:16:20 -04:00
static void vfio_ap_matrix_init(struct ap_config_info *info,
struct ap_matrix *matrix)
{
matrix->apm_max = info->apxa ? info->Na : 63;
matrix->aqm_max = info->apxa ? info->Nd : 15;
matrix->adm_max = info->apxa ? info->Nd : 15;
}
static int vfio_ap_mdev_probe(struct mdev_device *mdev)
2018-09-25 19:16:20 -04:00
{
struct ap_matrix_mdev *matrix_mdev;
int ret;
2018-09-25 19:16:20 -04:00
if ((atomic_dec_if_positive(&matrix_dev->available_instances) < 0))
return -EPERM;
matrix_mdev = kzalloc(sizeof(*matrix_mdev), GFP_KERNEL);
if (!matrix_mdev) {
ret = -ENOMEM;
goto err_dec_available;
2018-09-25 19:16:20 -04:00
}
vfio_init_group_dev(&matrix_mdev->vdev, &mdev->dev,
&vfio_ap_matrix_dev_ops);
2018-09-25 19:16:20 -04:00
matrix_mdev->mdev = mdev;
2018-09-25 19:16:20 -04:00
vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->matrix);
matrix_mdev->pqap_hook = handle_pqap;
2018-09-25 19:16:20 -04:00
mutex_lock(&matrix_dev->lock);
list_add(&matrix_mdev->node, &matrix_dev->mdev_list);
mutex_unlock(&matrix_dev->lock);
ret = vfio_register_emulated_iommu_dev(&matrix_mdev->vdev);
if (ret)
goto err_list;
dev_set_drvdata(&mdev->dev, matrix_mdev);
2018-09-25 19:16:20 -04:00
return 0;
err_list:
mutex_lock(&matrix_dev->lock);
list_del(&matrix_mdev->node);
mutex_unlock(&matrix_dev->lock);
vfio_uninit_group_dev(&matrix_mdev->vdev);
kfree(matrix_mdev);
err_dec_available:
atomic_inc(&matrix_dev->available_instances);
return ret;
2018-09-25 19:16:20 -04:00
}
static void vfio_ap_mdev_remove(struct mdev_device *mdev)
2018-09-25 19:16:20 -04:00
{
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(&mdev->dev);
vfio_unregister_group_dev(&matrix_mdev->vdev);
2018-09-25 19:16:20 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
vfio_ap_mdev_reset_queues(matrix_mdev);
2018-09-25 19:16:20 -04:00
list_del(&matrix_mdev->node);
mutex_unlock(&matrix_dev->lock);
vfio_uninit_group_dev(&matrix_mdev->vdev);
2018-09-25 19:16:20 -04:00
kfree(matrix_mdev);
atomic_inc(&matrix_dev->available_instances);
}
static ssize_t name_show(struct mdev_type *mtype,
struct mdev_type_attribute *attr, char *buf)
2018-09-25 19:16:20 -04:00
{
return sprintf(buf, "%s\n", VFIO_AP_MDEV_NAME_HWVIRT);
}
static MDEV_TYPE_ATTR_RO(name);
2018-09-25 19:16:20 -04:00
static ssize_t available_instances_show(struct mdev_type *mtype,
struct mdev_type_attribute *attr,
char *buf)
2018-09-25 19:16:20 -04:00
{
return sprintf(buf, "%d\n",
atomic_read(&matrix_dev->available_instances));
}
static MDEV_TYPE_ATTR_RO(available_instances);
2018-09-25 19:16:20 -04:00
static ssize_t device_api_show(struct mdev_type *mtype,
struct mdev_type_attribute *attr, char *buf)
2018-09-25 19:16:20 -04:00
{
return sprintf(buf, "%s\n", VFIO_DEVICE_API_AP_STRING);
}
static MDEV_TYPE_ATTR_RO(device_api);
2018-09-25 19:16:20 -04:00
static struct attribute *vfio_ap_mdev_type_attrs[] = {
&mdev_type_attr_name.attr,
&mdev_type_attr_device_api.attr,
&mdev_type_attr_available_instances.attr,
NULL,
};
static struct attribute_group vfio_ap_mdev_hwvirt_type_group = {
.name = VFIO_AP_MDEV_TYPE_HWVIRT,
.attrs = vfio_ap_mdev_type_attrs,
};
static struct attribute_group *vfio_ap_mdev_type_groups[] = {
&vfio_ap_mdev_hwvirt_type_group,
NULL,
};
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
struct vfio_ap_queue_reserved {
unsigned long *apid;
unsigned long *apqi;
bool reserved;
};
/**
* vfio_ap_has_queue - determines if the AP queue containing the target in @data
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*
* @dev: an AP queue device
* @data: a struct vfio_ap_queue_reserved reference
*
* Flags whether the AP queue device (@dev) has a queue ID containing the APQN,
* apid or apqi specified in @data:
*
* - If @data contains both an apid and apqi value, then @data will be flagged
* as reserved if the APID and APQI fields for the AP queue device matches
*
* - If @data contains only an apid value, @data will be flagged as
* reserved if the APID field in the AP queue device matches
*
* - If @data contains only an apqi value, @data will be flagged as
* reserved if the APQI field in the AP queue device matches
*
* Return: 0 to indicate the input to function succeeded. Returns -EINVAL if
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
* @data does not contain either an apid or apqi.
*/
static int vfio_ap_has_queue(struct device *dev, void *data)
{
struct vfio_ap_queue_reserved *qres = data;
struct ap_queue *ap_queue = to_ap_queue(dev);
ap_qid_t qid;
unsigned long id;
if (qres->apid && qres->apqi) {
qid = AP_MKQID(*qres->apid, *qres->apqi);
if (qid == ap_queue->qid)
qres->reserved = true;
} else if (qres->apid && !qres->apqi) {
id = AP_QID_CARD(ap_queue->qid);
if (id == *qres->apid)
qres->reserved = true;
} else if (!qres->apid && qres->apqi) {
id = AP_QID_QUEUE(ap_queue->qid);
if (id == *qres->apqi)
qres->reserved = true;
} else {
return -EINVAL;
}
return 0;
}
/**
* vfio_ap_verify_queue_reserved - verifies that the AP queue containing
* @apid or @aqpi is reserved
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*
* @apid: an AP adapter ID
* @apqi: an AP queue index
*
* Verifies that the AP queue with @apid/@apqi is reserved by the VFIO AP device
* driver according to the following rules:
*
* - If both @apid and @apqi are not NULL, then there must be an AP queue
* device bound to the vfio_ap driver with the APQN identified by @apid and
* @apqi
*
* - If only @apid is not NULL, then there must be an AP queue device bound
* to the vfio_ap driver with an APQN containing @apid
*
* - If only @apqi is not NULL, then there must be an AP queue device bound
* to the vfio_ap driver with an APQN containing @apqi
*
* Return: 0 if the AP queue is reserved; otherwise, returns -EADDRNOTAVAIL.
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*/
static int vfio_ap_verify_queue_reserved(unsigned long *apid,
unsigned long *apqi)
{
int ret;
struct vfio_ap_queue_reserved qres;
qres.apid = apid;
qres.apqi = apqi;
qres.reserved = false;
ret = driver_for_each_device(&matrix_dev->vfio_ap_drv->driver, NULL,
&qres, vfio_ap_has_queue);
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
if (ret)
return ret;
if (qres.reserved)
return 0;
return -EADDRNOTAVAIL;
}
static int
vfio_ap_mdev_verify_queues_reserved_for_apid(struct ap_matrix_mdev *matrix_mdev,
unsigned long apid)
{
int ret;
unsigned long apqi;
unsigned long nbits = matrix_mdev->matrix.aqm_max + 1;
if (find_first_bit_inv(matrix_mdev->matrix.aqm, nbits) >= nbits)
return vfio_ap_verify_queue_reserved(&apid, NULL);
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, nbits) {
ret = vfio_ap_verify_queue_reserved(&apid, &apqi);
if (ret)
return ret;
}
return 0;
}
/**
* vfio_ap_mdev_verify_no_sharing - verifies that the AP matrix is not configured
*
* @matrix_mdev: the mediated matrix device
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*
* Verifies that the APQNs derived from the cross product of the AP adapter IDs
* and AP queue indexes comprising the AP matrix are not configured for another
* mediated device. AP queue sharing is not allowed.
*
* Return: 0 if the APQNs are not shared; otherwise returns -EADDRINUSE.
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*/
static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
{
struct ap_matrix_mdev *lstdev;
DECLARE_BITMAP(apm, AP_DEVICES);
DECLARE_BITMAP(aqm, AP_DOMAINS);
list_for_each_entry(lstdev, &matrix_dev->mdev_list, node) {
if (matrix_mdev == lstdev)
continue;
memset(apm, 0, sizeof(apm));
memset(aqm, 0, sizeof(aqm));
/*
* We work on full longs, as we can only exclude the leftover
* bits in non-inverse order. The leftover is all zeros.
*/
if (!bitmap_and(apm, matrix_mdev->matrix.apm,
lstdev->matrix.apm, AP_DEVICES))
continue;
if (!bitmap_and(aqm, matrix_mdev->matrix.aqm,
lstdev->matrix.aqm, AP_DOMAINS))
continue;
return -EADDRINUSE;
}
return 0;
}
/**
* assign_adapter_store - parses the APID from @buf and sets the
* corresponding bit in the mediated matrix device's APM
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*
* @dev: the matrix device
* @attr: the mediated matrix device's assign_adapter attribute
* @buf: a buffer containing the AP adapter number (APID) to
* be assigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the APID is valid; otherwise,
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
* returns one of the following errors:
*
* 1. -EINVAL
* The APID is not a valid number
*
* 2. -ENODEV
* The APID exceeds the maximum value configured for the system
*
* 3. -EADDRNOTAVAIL
* An APQN derived from the cross product of the APID being assigned
* and the APQIs previously assigned is not bound to the vfio_ap device
* driver; or, if no APQIs have yet been assigned, the APID is not
* contained in an APQN bound to the vfio_ap device driver.
*
* 4. -EADDRINUSE
* An APQN derived from the cross product of the APID being assigned
* and the APQIs previously assigned is being used by another mediated
* matrix device
*/
static ssize_t assign_adapter_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apid;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If the KVM guest is running, disallow assignment of adapter */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
ret = kstrtoul(buf, 0, &apid);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
if (apid > matrix_mdev->matrix.apm_max) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
/*
* Set the bit in the AP mask (APM) corresponding to the AP adapter
* number (APID). The bits in the mask, from most significant to least
* significant bit, correspond to APIDs 0-255.
*/
ret = vfio_ap_mdev_verify_queues_reserved_for_apid(matrix_mdev, apid);
if (ret)
goto done;
set_bit_inv(apid, matrix_mdev->matrix.apm);
ret = vfio_ap_mdev_verify_no_sharing(matrix_mdev);
if (ret)
goto share_err;
ret = count;
goto done;
share_err:
clear_bit_inv(apid, matrix_mdev->matrix.apm);
done:
mutex_unlock(&matrix_dev->lock);
return ret;
}
static DEVICE_ATTR_WO(assign_adapter);
/**
* unassign_adapter_store - parses the APID from @buf and clears the
* corresponding bit in the mediated matrix device's APM
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_adapter attribute
* @buf: a buffer containing the adapter number (APID) to be unassigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the APID is valid; otherwise,
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
* returns one of the following errors:
* -EINVAL if the APID is not a number
* -ENODEV if the APID it exceeds the maximum value configured for the
* system
*/
static ssize_t unassign_adapter_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apid;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If the KVM guest is running, disallow unassignment of adapter */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
ret = kstrtoul(buf, 0, &apid);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
if (apid > matrix_mdev->matrix.apm_max) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
clear_bit_inv((unsigned long)apid, matrix_mdev->matrix.apm);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = count;
done:
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
return ret;
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
}
static DEVICE_ATTR_WO(unassign_adapter);
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
static int
vfio_ap_mdev_verify_queues_reserved_for_apqi(struct ap_matrix_mdev *matrix_mdev,
unsigned long apqi)
{
int ret;
unsigned long apid;
unsigned long nbits = matrix_mdev->matrix.apm_max + 1;
if (find_first_bit_inv(matrix_mdev->matrix.apm, nbits) >= nbits)
return vfio_ap_verify_queue_reserved(NULL, &apqi);
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, nbits) {
ret = vfio_ap_verify_queue_reserved(&apid, &apqi);
if (ret)
return ret;
}
return 0;
}
/**
* assign_domain_store - parses the APQI from @buf and sets the
* corresponding bit in the mediated matrix device's AQM
*
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
* @dev: the matrix device
* @attr: the mediated matrix device's assign_domain attribute
* @buf: a buffer containing the AP queue index (APQI) of the domain to
* be assigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the APQI is valid; otherwise returns
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
* one of the following errors:
*
* 1. -EINVAL
* The APQI is not a valid number
*
* 2. -ENODEV
* The APQI exceeds the maximum value configured for the system
*
* 3. -EADDRNOTAVAIL
* An APQN derived from the cross product of the APQI being assigned
* and the APIDs previously assigned is not bound to the vfio_ap device
* driver; or, if no APIDs have yet been assigned, the APQI is not
* contained in an APQN bound to the vfio_ap device driver.
*
* 4. -EADDRINUSE
* An APQN derived from the cross product of the APQI being assigned
* and the APIDs previously assigned is being used by another mediated
* matrix device
*/
static ssize_t assign_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apqi;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
unsigned long max_apqi = matrix_mdev->matrix.aqm_max;
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If the KVM guest is running, disallow assignment of domain */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
ret = kstrtoul(buf, 0, &apqi);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
if (apqi > max_apqi) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
ret = vfio_ap_mdev_verify_queues_reserved_for_apqi(matrix_mdev, apqi);
if (ret)
goto done;
set_bit_inv(apqi, matrix_mdev->matrix.aqm);
ret = vfio_ap_mdev_verify_no_sharing(matrix_mdev);
if (ret)
goto share_err;
ret = count;
goto done;
share_err:
clear_bit_inv(apqi, matrix_mdev->matrix.aqm);
done:
mutex_unlock(&matrix_dev->lock);
return ret;
}
static DEVICE_ATTR_WO(assign_domain);
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
/**
* unassign_domain_store - parses the APQI from @buf and clears the
* corresponding bit in the mediated matrix device's AQM
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_domain attribute
* @buf: a buffer containing the AP queue index (APQI) of the domain to
* be unassigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the APQI is valid; otherwise,
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
* returns one of the following errors:
* -EINVAL if the APQI is not a number
* -ENODEV if the APQI exceeds the maximum value configured for the system
*/
static ssize_t unassign_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apqi;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If the KVM guest is running, disallow unassignment of domain */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
ret = kstrtoul(buf, 0, &apqi);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
if (apqi > matrix_mdev->matrix.aqm_max) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
clear_bit_inv((unsigned long)apqi, matrix_mdev->matrix.aqm);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = count;
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
done:
mutex_unlock(&matrix_dev->lock);
return ret;
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
}
static DEVICE_ATTR_WO(unassign_domain);
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
/**
* assign_control_domain_store - parses the domain ID from @buf and sets
* the corresponding bit in the mediated matrix device's ADM
*
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
* @dev: the matrix device
* @attr: the mediated matrix device's assign_control_domain attribute
* @buf: a buffer containing the domain ID to be assigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the domain ID is valid; otherwise,
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
* returns one of the following errors:
* -EINVAL if the ID is not a number
* -ENODEV if the ID exceeds the maximum value configured for the system
*/
static ssize_t assign_control_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long id;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If the KVM guest is running, disallow assignment of control domain */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
ret = kstrtoul(buf, 0, &id);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
if (id > matrix_mdev->matrix.adm_max) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
/* Set the bit in the ADM (bitmask) corresponding to the AP control
* domain number (id). The bits in the mask, from most significant to
* least significant, correspond to IDs 0 up to the one less than the
* number of control domains that can be assigned.
*/
set_bit_inv(id, matrix_mdev->matrix.adm);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = count;
done:
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
return ret;
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
}
static DEVICE_ATTR_WO(assign_control_domain);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
/**
* unassign_control_domain_store - parses the domain ID from @buf and
* clears the corresponding bit in the mediated matrix device's ADM
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_control_domain attribute
* @buf: a buffer containing the domain ID to be unassigned
* @count: the number of bytes in @buf
*
* Return: the number of bytes processed if the domain ID is valid; otherwise,
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
* returns one of the following errors:
* -EINVAL if the ID is not a number
* -ENODEV if the ID exceeds the maximum value configured for the system
*/
static ssize_t unassign_control_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long domid;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
unsigned long max_domid = matrix_mdev->matrix.adm_max;
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
/* If a KVM guest is running, disallow unassignment of control domain */
if (matrix_mdev->kvm) {
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = -EBUSY;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
ret = kstrtoul(buf, 0, &domid);
if (ret)
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
goto done;
if (domid > max_domid) {
ret = -ENODEV;
goto done;
}
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
clear_bit_inv(domid, matrix_mdev->matrix.adm);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
ret = count;
done:
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
return ret;
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
}
static DEVICE_ATTR_WO(unassign_control_domain);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
static ssize_t control_domains_show(struct device *dev,
struct device_attribute *dev_attr,
char *buf)
{
unsigned long id;
int nchars = 0;
int n;
char *bufpos = buf;
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
unsigned long max_domid = matrix_mdev->matrix.adm_max;
mutex_lock(&matrix_dev->lock);
for_each_set_bit_inv(id, matrix_mdev->matrix.adm, max_domid + 1) {
n = sprintf(bufpos, "%04lx\n", id);
bufpos += n;
nchars += n;
}
mutex_unlock(&matrix_dev->lock);
return nchars;
}
static DEVICE_ATTR_RO(control_domains);
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
static ssize_t matrix_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
char *bufpos = buf;
unsigned long apid;
unsigned long apqi;
unsigned long apid1;
unsigned long apqi1;
unsigned long napm_bits = matrix_mdev->matrix.apm_max + 1;
unsigned long naqm_bits = matrix_mdev->matrix.aqm_max + 1;
int nchars = 0;
int n;
apid1 = find_first_bit_inv(matrix_mdev->matrix.apm, napm_bits);
apqi1 = find_first_bit_inv(matrix_mdev->matrix.aqm, naqm_bits);
mutex_lock(&matrix_dev->lock);
if ((apid1 < napm_bits) && (apqi1 < naqm_bits)) {
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, napm_bits) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
naqm_bits) {
n = sprintf(bufpos, "%02lx.%04lx\n", apid,
apqi);
bufpos += n;
nchars += n;
}
}
} else if (apid1 < napm_bits) {
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, napm_bits) {
n = sprintf(bufpos, "%02lx.\n", apid);
bufpos += n;
nchars += n;
}
} else if (apqi1 < naqm_bits) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, naqm_bits) {
n = sprintf(bufpos, ".%04lx\n", apqi);
bufpos += n;
nchars += n;
}
}
mutex_unlock(&matrix_dev->lock);
return nchars;
}
static DEVICE_ATTR_RO(matrix);
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
static struct attribute *vfio_ap_mdev_attrs[] = {
&dev_attr_assign_adapter.attr,
&dev_attr_unassign_adapter.attr,
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
&dev_attr_assign_domain.attr,
&dev_attr_unassign_domain.attr,
s390: vfio-ap: sysfs interfaces to configure control domains Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-9-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:23 -04:00
&dev_attr_assign_control_domain.attr,
&dev_attr_unassign_control_domain.attr,
&dev_attr_control_domains.attr,
&dev_attr_matrix.attr,
s390: vfio-ap: sysfs interfaces to configure domains Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20180925231641.4954-8-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:22 -04:00
NULL,
s390: vfio-ap: sysfs interfaces to configure adapters Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-7-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:21 -04:00
};
static struct attribute_group vfio_ap_mdev_attr_group = {
.attrs = vfio_ap_mdev_attrs
};
static const struct attribute_group *vfio_ap_mdev_attr_groups[] = {
&vfio_ap_mdev_attr_group,
NULL
};
/**
* vfio_ap_mdev_set_kvm - sets all data for @matrix_mdev that are needed
* to manage AP resources for the guest whose state is represented by @kvm
*
* @matrix_mdev: a mediated matrix device
* @kvm: reference to KVM instance
*
* Return: 0 if no other mediated matrix device has a reference to @kvm;
* otherwise, returns an -EPERM.
*/
static int vfio_ap_mdev_set_kvm(struct ap_matrix_mdev *matrix_mdev,
struct kvm *kvm)
{
struct ap_matrix_mdev *m;
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
if (kvm->arch.crypto.crycbd) {
down_write(&kvm->arch.crypto.pqap_hook_rwsem);
kvm->arch.crypto.pqap_hook = &matrix_mdev->pqap_hook;
up_write(&kvm->arch.crypto.pqap_hook_rwsem);
mutex_lock(&kvm->lock);
mutex_lock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
list_for_each_entry(m, &matrix_dev->mdev_list, node) {
if (m != matrix_mdev && m->kvm == kvm) {
mutex_unlock(&kvm->lock);
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
return -EPERM;
}
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
}
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
kvm_get_kvm(kvm);
matrix_mdev->kvm = kvm;
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
kvm_arch_crypto_set_masks(kvm,
matrix_mdev->matrix.apm,
matrix_mdev->matrix.aqm,
matrix_mdev->matrix.adm);
mutex_unlock(&kvm->lock);
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
}
return 0;
}
/**
* vfio_ap_mdev_iommu_notifier - IOMMU notifier callback
*
* @nb: The notifier block
* @action: Action to be taken
* @data: data associated with the request
*
* For an UNMAP request, unpin the guest IOVA (the NIB guest address we
* pinned before). Other requests are ignored.
*
* Return: for an UNMAP request, NOFITY_OK; otherwise NOTIFY_DONE.
*/
static int vfio_ap_mdev_iommu_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct ap_matrix_mdev *matrix_mdev;
matrix_mdev = container_of(nb, struct ap_matrix_mdev, iommu_notifier);
if (action == VFIO_IOMMU_NOTIFY_DMA_UNMAP) {
struct vfio_iommu_type1_dma_unmap *unmap = data;
unsigned long g_pfn = unmap->iova >> PAGE_SHIFT;
vfio_unpin_pages(&matrix_mdev->vdev, &g_pfn, 1);
return NOTIFY_OK;
}
return NOTIFY_DONE;
}
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
/**
* vfio_ap_mdev_unset_kvm - performs clean-up of resources no longer needed
* by @matrix_mdev.
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
*
* @matrix_mdev: a matrix mediated device
*/
s390/vfio-ap: fix kernel doc and signature of group notifier functions The vfio_ap device driver registers a group notifier function to handle the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been set or cleared. There are two helper functions invoked by the handler function: One called when the KVM pointer has been set, and the other when the pointer is cleared. The kernel doc for both of these functions contains a comment introduced by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks) that is no longer valid. This patch removes this comment from the kernel doc of each helper function. Commit 86956e70761b (s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature of the helper function that handles the event indicating the KVM pointer has been cleared. The parameter added was the KVM pointer itself. One of the function's primary purposes is to clear the KVM pointer from the ap_matrix_mdev instance in which it is stored. Since the callers of this function derive the KVM pointer passed to the function from the ap_matrix_mdev object itself, it is completely unnecessary to include this parameter in the function's signature since it can simply be retrieved from the ap_matrix_mdev object which is also passed in. This patch removes the KVM pointer from the function's signature. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-18 16:17:35 -04:00
static void vfio_ap_mdev_unset_kvm(struct ap_matrix_mdev *matrix_mdev)
{
s390/vfio-ap: fix kernel doc and signature of group notifier functions The vfio_ap device driver registers a group notifier function to handle the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been set or cleared. There are two helper functions invoked by the handler function: One called when the KVM pointer has been set, and the other when the pointer is cleared. The kernel doc for both of these functions contains a comment introduced by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks) that is no longer valid. This patch removes this comment from the kernel doc of each helper function. Commit 86956e70761b (s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature of the helper function that handles the event indicating the KVM pointer has been cleared. The parameter added was the KVM pointer itself. One of the function's primary purposes is to clear the KVM pointer from the ap_matrix_mdev instance in which it is stored. Since the callers of this function derive the KVM pointer passed to the function from the ap_matrix_mdev object itself, it is completely unnecessary to include this parameter in the function's signature since it can simply be retrieved from the ap_matrix_mdev object which is also passed in. This patch removes the KVM pointer from the function's signature. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-18 16:17:35 -04:00
struct kvm *kvm = matrix_mdev->kvm;
if (kvm && kvm->arch.crypto.crycbd) {
down_write(&kvm->arch.crypto.pqap_hook_rwsem);
kvm->arch.crypto.pqap_hook = NULL;
up_write(&kvm->arch.crypto.pqap_hook_rwsem);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&kvm->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
mutex_lock(&matrix_dev->lock);
kvm_arch_crypto_clear_masks(kvm);
vfio_ap_mdev_reset_queues(matrix_mdev);
kvm_put_kvm(kvm);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
matrix_mdev->kvm = NULL;
mutex_unlock(&kvm->lock);
mutex_unlock(&matrix_dev->lock);
s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks This patch fixes a lockdep splat introduced by commit f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated"). The lockdep splat only occurs when starting a Secure Execution guest. Crypto virtualization (vfio_ap) is not yet supported for SE guests; however, in order to avoid this problem when support becomes available, this fix is being provided. The circular locking dependency was introduced when the setting of the masks in the guest's APCB was executed while holding the matrix_dev->lock. While the lock is definitely needed to protect the setting/unsetting of the matrix_mdev->kvm pointer, it is not necessarily critical for setting the masks; so, the matrix_dev->lock will be released while the masks are being set or cleared. Keep in mind, however, that another process that takes the matrix_dev->lock can get control while the masks in the guest's APCB are being set or cleared as a result of the driver being notified that the KVM pointer has been set or unset. This could result in invalid access to the matrix_mdev->kvm pointer by the intervening process. To avoid this scenario, two new fields are being added to the ap_matrix_mdev struct: struct ap_matrix_mdev { ... bool kvm_busy; wait_queue_head_t wait_for_kvm; ... }; The functions that handle notification that the KVM pointer value has been set or cleared will set the kvm_busy flag to true until they are done processing at which time they will set it to false and wake up the tasks on the matrix_mdev->wait_for_kvm wait queue. Functions that require access to matrix_mdev->kvm will sleep on the wait queue until they are awakened at which time they can safely access the matrix_mdev->kvm field. Fixes: f21916ec4826 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated") Cc: stable@vger.kernel.org Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-25 08:46:40 -04:00
}
}
static struct vfio_ap_queue *vfio_ap_find_queue(int apqn)
{
struct device *dev;
struct vfio_ap_queue *q = NULL;
dev = driver_find_device(&matrix_dev->vfio_ap_drv->driver, NULL,
&apqn, match_apqn);
if (dev) {
q = dev_get_drvdata(dev);
put_device(dev);
}
return q;
}
int vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q,
unsigned int retry)
{
struct ap_queue_status status;
int ret;
int retry2 = 2;
if (!q)
return 0;
retry_zapq:
status = ap_zapq(q->apqn);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
ret = 0;
break;
case AP_RESPONSE_RESET_IN_PROGRESS:
if (retry--) {
msleep(20);
goto retry_zapq;
}
ret = -EBUSY;
break;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
WARN_ON_ONCE(status.irq_enabled);
ret = -EBUSY;
goto free_resources;
default:
/* things are really broken, give up */
WARN(true, "PQAP/ZAPQ completed with invalid rc (%x)\n",
status.response_code);
return -EIO;
}
/* wait for the reset to take effect */
while (retry2--) {
if (status.queue_empty && !status.irq_enabled)
break;
msleep(20);
status = ap_tapq(q->apqn, NULL);
}
WARN_ON_ONCE(retry2 <= 0);
free_resources:
vfio_ap_free_aqic_resources(q);
return ret;
}
static int vfio_ap_mdev_reset_queues(struct ap_matrix_mdev *matrix_mdev)
{
int ret;
int rc = 0;
unsigned long apid, apqi;
struct vfio_ap_queue *q;
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm,
matrix_mdev->matrix.apm_max + 1) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
matrix_mdev->matrix.aqm_max + 1) {
q = vfio_ap_find_queue(AP_MKQID(apid, apqi));
ret = vfio_ap_mdev_reset_queue(q, 1);
/*
* Regardless whether a queue turns out to be busy, or
* is not operational, we need to continue resetting
* the remaining queues.
*/
if (ret)
rc = ret;
}
}
return rc;
}
static int vfio_ap_mdev_open_device(struct vfio_device *vdev)
{
struct ap_matrix_mdev *matrix_mdev =
container_of(vdev, struct ap_matrix_mdev, vdev);
unsigned long events;
int ret;
if (!vdev->kvm)
return -EINVAL;
ret = vfio_ap_mdev_set_kvm(matrix_mdev, vdev->kvm);
if (ret)
return ret;
matrix_mdev->iommu_notifier.notifier_call = vfio_ap_mdev_iommu_notifier;
events = VFIO_IOMMU_NOTIFY_DMA_UNMAP;
ret = vfio_register_notifier(vdev, VFIO_IOMMU_NOTIFY, &events,
&matrix_mdev->iommu_notifier);
if (ret)
goto err_kvm;
return 0;
err_kvm:
vfio_ap_mdev_unset_kvm(matrix_mdev);
return ret;
}
static void vfio_ap_mdev_close_device(struct vfio_device *vdev)
{
struct ap_matrix_mdev *matrix_mdev =
container_of(vdev, struct ap_matrix_mdev, vdev);
vfio_unregister_notifier(vdev, VFIO_IOMMU_NOTIFY,
&matrix_mdev->iommu_notifier);
s390/vfio-ap: fix kernel doc and signature of group notifier functions The vfio_ap device driver registers a group notifier function to handle the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been set or cleared. There are two helper functions invoked by the handler function: One called when the KVM pointer has been set, and the other when the pointer is cleared. The kernel doc for both of these functions contains a comment introduced by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks) that is no longer valid. This patch removes this comment from the kernel doc of each helper function. Commit 86956e70761b (s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature of the helper function that handles the event indicating the KVM pointer has been cleared. The parameter added was the KVM pointer itself. One of the function's primary purposes is to clear the KVM pointer from the ap_matrix_mdev instance in which it is stored. Since the callers of this function derive the KVM pointer passed to the function from the ap_matrix_mdev object itself, it is completely unnecessary to include this parameter in the function's signature since it can simply be retrieved from the ap_matrix_mdev object which is also passed in. This patch removes the KVM pointer from the function's signature. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-18 16:17:35 -04:00
vfio_ap_mdev_unset_kvm(matrix_mdev);
}
static int vfio_ap_mdev_get_device_info(unsigned long arg)
{
unsigned long minsz;
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_AP | VFIO_DEVICE_FLAGS_RESET;
info.num_regions = 0;
info.num_irqs = 0;
return copy_to_user((void __user *)arg, &info, minsz) ? -EFAULT : 0;
}
static ssize_t vfio_ap_mdev_ioctl(struct vfio_device *vdev,
unsigned int cmd, unsigned long arg)
{
struct ap_matrix_mdev *matrix_mdev =
container_of(vdev, struct ap_matrix_mdev, vdev);
int ret;
mutex_lock(&matrix_dev->lock);
switch (cmd) {
case VFIO_DEVICE_GET_INFO:
ret = vfio_ap_mdev_get_device_info(arg);
break;
case VFIO_DEVICE_RESET:
ret = vfio_ap_mdev_reset_queues(matrix_mdev);
break;
default:
ret = -EOPNOTSUPP;
break;
}
mutex_unlock(&matrix_dev->lock);
return ret;
}
static const struct vfio_device_ops vfio_ap_matrix_dev_ops = {
.open_device = vfio_ap_mdev_open_device,
.close_device = vfio_ap_mdev_close_device,
.ioctl = vfio_ap_mdev_ioctl,
};
static struct mdev_driver vfio_ap_matrix_driver = {
.driver = {
.name = "vfio_ap_mdev",
.owner = THIS_MODULE,
.mod_name = KBUILD_MODNAME,
.dev_groups = vfio_ap_mdev_attr_groups,
},
.probe = vfio_ap_mdev_probe,
.remove = vfio_ap_mdev_remove,
.supported_type_groups = vfio_ap_mdev_type_groups,
2018-09-25 19:16:20 -04:00
};
int vfio_ap_mdev_register(void)
{
int ret;
2018-09-25 19:16:20 -04:00
atomic_set(&matrix_dev->available_instances, MAX_ZDEV_ENTRIES_EXT);
ret = mdev_register_driver(&vfio_ap_matrix_driver);
if (ret)
return ret;
ret = mdev_register_device(&matrix_dev->device, &vfio_ap_matrix_driver);
if (ret)
goto err_driver;
return 0;
err_driver:
mdev_unregister_driver(&vfio_ap_matrix_driver);
return ret;
2018-09-25 19:16:20 -04:00
}
void vfio_ap_mdev_unregister(void)
{
mdev_unregister_device(&matrix_dev->device);
mdev_unregister_driver(&vfio_ap_matrix_driver);
2018-09-25 19:16:20 -04:00
}