iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-ep93xx/Kconfig

162 lines
3.9 KiB
Plaintext
Raw Normal View History

[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
if ARCH_EP93XX
menu "Cirrus EP93xx Implementation Options"
[ARM] 3370/2: ep93xx: add crunch support Patch from Lennert Buytenhek Add the necessary kernel bits for crunch task switching. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27 23:03:03 +01:00
config CRUNCH
bool "Support for MaverickCrunch"
help
Enable kernel support for MaverickCrunch.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
comment "EP93xx Platforms"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
choice
prompt "EP93xx first SDRAM bank selection"
default EP93XX_SDCE3_SYNC_PHYS_OFFSET
config EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0x00000000
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
first SDRAM bank at 0xc0000000
endchoice
[ARM] 3964/1: ep93xx: add ads sphere support Add initial board support for the ADS Sphere board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 15:15:55 +01:00
config MACH_ADSSPHERE
bool "Support ADS Sphere"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 3964/1: ep93xx: add ads sphere support Add initial board support for the ADS Sphere board. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 15:15:55 +01:00
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
config MACH_EDB93XX
bool
config MACH_EDB9301
bool "Support Cirrus Logic EDB9301"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9301 Evaluation Board.
[ARM] 3674/1: ep93xx: add cirrus logic edb9302 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 16:06:31 +01:00
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3674/1: ep93xx: add cirrus logic edb9302 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9302, an evaluation board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host port, audio in/out, two serial ports and a 10/100 ethernet interface. George Kashperko submitted the original patch, this patch is a rewrite using the newer physmap platform driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 16:06:31 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
[ARM] 3993/1: ep93xx: add cirrus logic edb9302a support Add support for the Cirrus Logic EDB9302A Evaluation Board. Confirmed to work by Chase Douglas. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-06 23:07:13 +01:00
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE0_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3993/1: ep93xx: add cirrus logic edb9302a support Add support for the Cirrus Logic EDB9302A Evaluation Board. Confirmed to work by Chase Douglas. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-06 23:07:13 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302A Evaluation Board.
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 08:30:16 +01:00
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support This patch adds support for the Cirrus Logic EDB9307, an evaluation board based on the Cirrus Logic EP9307 SoC, which features amongst other things 64M RAM, 32M NOR flash, 3 USB host ports, audio in/out, two serial ports and a 10/100 ethernet interface. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-23 08:30:16 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
[ARM] 5309/1: ep93xx: add edb9307a platform Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 20:01:30 +01:00
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE0_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 5309/1: ep93xx: add edb9307a platform Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-15 20:01:30 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307A Evaluation Board.
[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 10:48:02 +01:00
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support Add Cirrus Logic EDB9312 support. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 10:48:02 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9312 Evaluation Board.
[ARM] 3671/1: ep93xx: add cirrus logic edb9315 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27 23:03:04 +01:00
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3671/1: ep93xx: add cirrus logic edb9315 support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-27 23:03:04 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315A, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. The EDB9315A is a low-cost version of the EDB9315, and has only 16M of NOR flash, while the EDB9315 has 32M. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:56:47 +01:00
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE0_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_EDB93XX
[ARM] 3706/2: ep93xx: add cirrus logic edb9315a support Patch from Lennert Buytenhek This patch adds support for the Cirrus Logic EDB9315A, an evaluation board based on the Cirrus Logic EP9315 SoC, with 64M RAM, two USB host ports, audio in/out, three serial ports, 10/100 ethernet, and IDE, VGA, and LCD interfaces. The EDB9315A is a low-cost version of the EDB9315, and has only 16M of NOR flash, while the EDB9315 has 32M. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 19:56:47 +01:00
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
config MACH_GESBC9312
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
bool
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9H
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
bool "Support Contec Hypercontrol Micro9-H"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
Contec Hypercontrol Micro9-H board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9M
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
bool "Support Contec Hypercontrol Micro9-M"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
Contec Hypercontrol Micro9-M board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
config MACH_MICRO9L
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
bool "Support Contec Hypercontrol Micro9-L"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 5504/1: ep93xx: Merge all edb93xx platforms The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-04 19:09:25 +01:00
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
Contec Hypercontrol Micro9-L board.
[ARM] 4047/1: Add initial board support for Contec Hypercontrol Micro9 boards. Contec Micro9 (H/M/L) boards based on Cirrus Logic ep93xx (ep9315/ep9307/ep9302). Signed-off-by: Manfred Gruber <m.gruber@tirol.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-17 22:10:48 +01:00
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
[ARM] 5523/1: ep93xx phys offset selection This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-21 22:11:52 +01:00
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
[ARM] 5276/1: ep93xx: allow selecting UART for early kernel messages Currently on the EP93xx platform early kernel messages go to UART1. Since this UART is the only one that has modem control signals it might be used for another purpose and it is undesirable for those messages to appear. This patch allows one of the other UARTs to be selected in the kernel configuration. It is assumed that the bootloader has configured and initialized the UART since this was the previous assumption. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02 17:13:02 +01:00
choice
prompt "Select a UART for early kernel messages"
config EP93XX_EARLY_UART1
bool "UART1"
config EP93XX_EARLY_UART2
bool "UART2"
config EP93XX_EARLY_UART3
bool "UART3"
endchoice
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-20 17:10:13 +00:00
endmenu
endif
Reference in New Issue Copy Permalink