2023-01-25 23:00:44 +03:00
// SPDX-License-Identifier: GPL-2.0-only
2021-05-26 00:24:56 +03:00
/*
* Copyright ( C ) 2021 Western Digital Corporation or its affiliates .
*/
# include <linux/blkdev.h>
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
# include <linux/mm.h>
# include <linux/sched/mm.h>
# include <linux/slab.h>
2023-06-07 06:26:27 +03:00
# include <linux/bitmap.h>
2021-05-26 00:24:56 +03:00
# include "dm-core.h"
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
# define DM_MSG_PREFIX "zone"
# define DM_ZONE_INVALID_WP_OFST UINT_MAX
2021-05-26 00:24:56 +03:00
/*
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
* For internal zone reports bypassing the top BIO submission path .
2021-05-26 00:24:56 +03:00
*/
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
static int dm_blk_do_report_zones ( struct mapped_device * md , struct dm_table * t ,
sector_t sector , unsigned int nr_zones ,
report_zones_cb cb , void * data )
2021-05-26 00:24:56 +03:00
{
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
struct gendisk * disk = md - > disk ;
int ret ;
2021-05-26 00:24:56 +03:00
struct dm_report_zones_args args = {
. next_sector = sector ,
. orig_data = data ,
. orig_cb = cb ,
} ;
do {
struct dm_target * tgt ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
tgt = dm_table_find_target ( t , args . next_sector ) ;
if ( WARN_ON_ONCE ( ! tgt - > type - > report_zones ) )
return - EIO ;
2021-05-26 00:24:56 +03:00
args . tgt = tgt ;
ret = tgt - > type - > report_zones ( tgt , & args ,
nr_zones - args . zone_idx ) ;
if ( ret < 0 )
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
return ret ;
2021-05-26 00:24:56 +03:00
} while ( args . zone_idx < nr_zones & &
args . next_sector < get_capacity ( disk ) ) ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
return args . zone_idx ;
}
/*
* User facing dm device block device report zone operation . This calls the
* report_zones operation for each target of a device table . This operation is
* generally implemented by targets using dm_report_zones ( ) .
*/
int dm_blk_report_zones ( struct gendisk * disk , sector_t sector ,
unsigned int nr_zones , report_zones_cb cb , void * data )
{
struct mapped_device * md = disk - > private_data ;
struct dm_table * map ;
int srcu_idx , ret ;
2024-04-08 04:41:12 +03:00
if ( ! md - > zone_revalidate_map ) {
/* Regular user context */
if ( dm_suspended_md ( md ) )
return - EAGAIN ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
2024-04-08 04:41:12 +03:00
map = dm_get_live_table ( md , & srcu_idx ) ;
if ( ! map )
return - EIO ;
} else {
/* Zone revalidation during __bind() */
map = md - > zone_revalidate_map ;
}
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
ret = dm_blk_do_report_zones ( md , map , sector , nr_zones , cb , data ) ;
2024-04-08 04:41:12 +03:00
if ( ! md - > zone_revalidate_map )
dm_put_live_table ( md , srcu_idx ) ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
2021-05-26 00:24:56 +03:00
return ret ;
}
2021-05-26 00:24:57 +03:00
static int dm_report_zones_cb ( struct blk_zone * zone , unsigned int idx ,
void * data )
2021-05-26 00:24:56 +03:00
{
struct dm_report_zones_args * args = data ;
sector_t sector_diff = args - > tgt - > begin - args - > start ;
/*
* Ignore zones beyond the target range .
*/
if ( zone - > start > = args - > start + args - > tgt - > len )
return 0 ;
/*
* Remap the start sector and write pointer position of the zone
* to match its position in the target range .
*/
zone - > start + = sector_diff ;
if ( zone - > type ! = BLK_ZONE_TYPE_CONVENTIONAL ) {
if ( zone - > cond = = BLK_ZONE_COND_FULL )
zone - > wp = zone - > start + zone - > len ;
else if ( zone - > cond = = BLK_ZONE_COND_EMPTY )
zone - > wp = zone - > start ;
else
zone - > wp + = sector_diff ;
}
args - > next_sector = zone - > start + zone - > len ;
return args - > orig_cb ( zone , args - > zone_idx + + , args - > orig_data ) ;
}
2021-05-26 00:24:57 +03:00
/*
* Helper for drivers of zoned targets to implement struct target_type
* report_zones operation .
*/
int dm_report_zones ( struct block_device * bdev , sector_t start , sector_t sector ,
struct dm_report_zones_args * args , unsigned int nr_zones )
{
/*
* Set the target mapping start sector first so that
* dm_report_zones_cb ( ) can correctly remap zone information .
*/
args - > start = start ;
return blkdev_report_zones ( bdev , sector , nr_zones ,
dm_report_zones_cb , args ) ;
}
EXPORT_SYMBOL_GPL ( dm_report_zones ) ;
2021-05-26 00:24:56 +03:00
2021-05-26 00:24:58 +03:00
bool dm_is_zone_write ( struct mapped_device * md , struct bio * bio )
{
struct request_queue * q = md - > queue ;
if ( ! blk_queue_is_zoned ( q ) )
return false ;
switch ( bio_op ( bio ) ) {
case REQ_OP_WRITE_ZEROES :
case REQ_OP_WRITE :
return ! op_is_flush ( bio - > bi_opf ) & & bio_sectors ( bio ) ;
default :
return false ;
}
}
2024-05-01 14:08:54 +03:00
/*
* Count conventional zones of a mapped zoned device . If the device
* only has conventional zones , do not expose it as zoned .
*/
static int dm_check_zoned_cb ( struct blk_zone * zone , unsigned int idx ,
void * data )
{
unsigned int * nr_conv_zones = data ;
if ( zone - > type = = BLK_ZONE_TYPE_CONVENTIONAL )
( * nr_conv_zones ) + + ;
return 0 ;
}
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
/*
* Revalidate the zones of a mapped device to initialize resource necessary
* for zone append emulation . Note that we cannot simply use the block layer
* blk_revalidate_disk_zones ( ) function here as the mapped device is suspended
* ( this is called from __bind ( ) context ) .
*/
2024-06-11 05:36:37 +03:00
int dm_revalidate_zones ( struct dm_table * t , struct request_queue * q )
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
{
2024-06-11 05:36:37 +03:00
struct mapped_device * md = t - > md ;
2022-07-06 10:03:50 +03:00
struct gendisk * disk = md - > disk ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
int ret ;
2024-06-11 05:36:37 +03:00
if ( ! get_capacity ( disk ) )
return 0 ;
2024-04-08 04:41:12 +03:00
/* Revalidate only if something changed. */
2024-06-11 05:36:37 +03:00
if ( ! disk - > nr_zones | | disk - > nr_zones ! = md - > nr_zones ) {
DMINFO ( " %s using %s zone append " ,
disk - > disk_name ,
queue_emulates_zone_append ( q ) ? " emulated " : " native " ) ;
2024-04-08 04:41:12 +03:00
md - > nr_zones = 0 ;
2024-06-11 05:36:37 +03:00
}
2024-04-08 04:41:12 +03:00
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
if ( md - > nr_zones )
return 0 ;
2021-06-19 02:15:19 +03:00
/*
2024-04-08 04:41:12 +03:00
* Our table is not live yet . So the call to dm_get_live_table ( )
* in dm_blk_report_zones ( ) will fail . Set a temporary pointer to
* our table for dm_blk_report_zones ( ) to use directly .
2021-06-19 02:15:19 +03:00
*/
2024-04-08 04:41:12 +03:00
md - > zone_revalidate_map = t ;
2024-04-08 04:41:20 +03:00
ret = blk_revalidate_disk_zones ( disk ) ;
2024-04-08 04:41:12 +03:00
md - > zone_revalidate_map = NULL ;
if ( ret ) {
DMERR ( " Revalidate zones failed %d " , ret ) ;
return ret ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
}
2022-07-06 10:03:50 +03:00
md - > nr_zones = disk - > nr_zones ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
return 0 ;
}
static int device_not_zone_append_capable ( struct dm_target * ti ,
struct dm_dev * dev , sector_t start ,
sector_t len , void * data )
{
2022-07-06 10:03:37 +03:00
return ! bdev_is_zoned ( dev - > bdev ) ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
}
static bool dm_table_supports_zone_append ( struct dm_table * t )
{
2022-07-05 23:12:27 +03:00
for ( unsigned int i = 0 ; i < t - > num_targets ; i + + ) {
struct dm_target * ti = dm_table_get_target ( t , i ) ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
if ( ti - > emulate_zone_append )
return false ;
if ( ! ti - > type - > iterate_devices | |
ti - > type - > iterate_devices ( ti , device_not_zone_append_capable , NULL ) )
return false ;
}
return true ;
}
2024-05-27 15:36:20 +03:00
int dm_set_zones_restrictions ( struct dm_table * t , struct request_queue * q ,
struct queue_limits * lim )
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
{
struct mapped_device * md = t - > md ;
2024-05-27 15:36:19 +03:00
struct gendisk * disk = md - > disk ;
unsigned int nr_conv_zones = 0 ;
2024-05-01 14:08:54 +03:00
int ret ;
2021-05-26 00:24:56 +03:00
/*
2024-04-08 04:41:12 +03:00
* Check if zone append is natively supported , and if not , set the
* mapped device queue as needing zone append emulation .
2021-05-26 00:24:56 +03:00
*/
WARN_ON_ONCE ( queue_is_mq ( q ) ) ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
if ( dm_table_supports_zone_append ( t ) ) {
clear_bit ( DMF_EMULATE_ZONE_APPEND , & md - > flags ) ;
2024-04-08 04:41:12 +03:00
} else {
set_bit ( DMF_EMULATE_ZONE_APPEND , & md - > flags ) ;
2024-05-27 15:36:20 +03:00
lim - > max_zone_append_sectors = 0 ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
}
2024-05-01 14:08:54 +03:00
/*
2024-05-27 15:36:19 +03:00
* Count conventional zones to check that the mapped device will indeed
* have sequential write required zones .
2024-05-01 14:08:54 +03:00
*/
2024-05-27 15:36:19 +03:00
md - > zone_revalidate_map = t ;
ret = dm_blk_report_zones ( disk , 0 , UINT_MAX ,
dm_check_zoned_cb , & nr_conv_zones ) ;
md - > zone_revalidate_map = NULL ;
if ( ret < 0 ) {
DMERR ( " Check zoned failed %d " , ret ) ;
2024-05-01 14:08:54 +03:00
return ret ;
2024-05-27 15:36:19 +03:00
}
/*
* If we only have conventional zones , expose the mapped device as
* a regular device .
*/
if ( nr_conv_zones > = ret ) {
2024-05-27 15:36:20 +03:00
lim - > max_open_zones = 0 ;
lim - > max_active_zones = 0 ;
lim - > zoned = false ;
2024-05-27 15:36:19 +03:00
clear_bit ( DMF_EMULATE_ZONE_APPEND , & md - > flags ) ;
disk - > nr_zones = 0 ;
2024-05-01 14:08:54 +03:00
return 0 ;
2024-05-27 15:36:19 +03:00
}
2024-05-01 14:08:54 +03:00
2024-05-27 15:36:18 +03:00
if ( ! static_key_enabled ( & zoned_enabled . key ) )
static_branch_enable ( & zoned_enabled ) ;
return 0 ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
}
/*
* IO completion callback called from clone_endio ( ) .
*/
void dm_zone_endio ( struct dm_io * io , struct bio * clone )
{
struct mapped_device * md = io - > md ;
2022-07-06 10:03:49 +03:00
struct gendisk * disk = md - > disk ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
struct bio * orig_bio = io - > orig_bio ;
/*
2024-04-08 04:41:12 +03:00
* Get the offset within the zone of the written sector
* and add that to the original bio sector position .
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
*/
2024-04-08 04:41:12 +03:00
if ( clone - > bi_status = = BLK_STS_OK & &
bio_op ( clone ) = = REQ_OP_ZONE_APPEND ) {
sector_t mask = bdev_zone_sectors ( disk - > part0 ) - 1 ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
2024-04-08 04:41:12 +03:00
orig_bio - > bi_iter . bi_sector + = clone - > bi_iter . bi_sector & mask ;
dm: introduce zone append emulation
For zoned targets that cannot support zone append operations, implement
an emulation using regular write operations. If the original BIO
submitted by the user is a zone append operation, change its clone into
a regular write operation directed at the target zone write pointer
position.
To do so, an array of write pointer offsets (write pointer position
relative to the start of a zone) is added to struct mapped_device. All
operations that modify a sequential zone write pointer (writes, zone
reset, zone finish and zone append) are intersepted in __map_bio() and
processed using the new functions dm_zone_map_bio().
Detection of the target ability to natively support zone append
operations is done from dm_table_set_restrictions() by calling the
function dm_set_zones_restrictions(). A target that does not support
zone append operation, either by explicitly declaring it using the new
struct dm_target field zone_append_not_supported, or because the device
table contains a non-zoned device, has its mapped device marked with the
new flag DMF_ZONE_APPEND_EMULATED. The helper function
dm_emulate_zone_append() is introduced to test a mapped device for this
new flag.
Atomicity of the zones write pointer tracking and updates is done using
a zone write locking mechanism based on a bitmap. This is similar to
the block layer method but based on BIOs rather than struct request.
A zone write lock is taken in dm_zone_map_bio() for any clone BIO with
an operation type that changes the BIO target zone write pointer
position. The zone write lock is released if the clone BIO is failed
before submission or when dm_zone_endio() is called when the clone BIO
completes.
The zone write lock bitmap of the mapped device, together with a bitmap
indicating zone types (conv_zones_bitmap) and the write pointer offset
array (zwp_offset) are allocated and initialized with a full device zone
report in dm_set_zones_restrictions() using the function
dm_revalidate_zones().
For failed operations that may have modified a zone write pointer, the
zone write pointer offset is marked as invalid in dm_zone_endio().
Zones with an invalid write pointer offset are checked and the write
pointer updated using an internal report zone operation when the
faulty zone is accessed again by the user.
All functions added for this emulation have a minimal overhead for
zoned targets natively supporting zone append operations. Regular
device targets are also not affected. The added code also does not
impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all
dm zone related functions.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-05-26 00:25:00 +03:00
}
2024-04-08 04:41:12 +03:00
return ;
2021-05-26 00:24:56 +03:00
}