iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/arch/arm/configs/imx_v6_v7_defconfig

455 lines
10 KiB
Plaintext
Raw Normal View History

ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_KERNEL_LZO=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_SYSVIPC=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 11:13:48 -03:00
CONFIG_PREEMPT_VOLUNTARY=y
ARM: imx_v6_v7_defconfig: Select CONFIG_IKCONFIG_PROC It is useful to know how the kernel was configured via: zcat /proc/config.gz ,so select the CONFIG_IKCONFIG_PROC option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-14 10:49:46 -03:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_LOG_BUF_SHIFT=18
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_CGROUPS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_RELAY=y
ARM: imx: update imx_v6_v7_defconfig It adds CONFIG_BLK_DEV_INITRD and runs savedefconfig. The resulted can boot Linaro rootfs out of box. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-01-31 16:43:24 +08:00
CONFIG_BLK_DEV_INITRD=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 14:44:16 -08:00
CONFIG_EXPERT=y
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS Select CONFIG_PERF_EVENTS so that oprofile can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-15 15:32:01 -02:00
CONFIG_PERF_EVENTS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
ARM: imx: enable multi-platform build It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-17 09:38:39 +08:00
CONFIG_ARCH_MULTI_V6=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_ARCH_MXC=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_QONG=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_KZM_ARM11_01=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_MACH_IMX31_DT=y
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support Let MX35 and MX50 device tree support be built by default. Generated by doing: - Selected CONFIG_MACH_IMX35_DT and CONFIG_SOC_IMX50 via 'make menuconfig' - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-23 13:27:58 -02:00
CONFIG_MACH_IMX35_DT=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_MACH_PCM043=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_VPR200=y
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support Let MX35 and MX50 device tree support be built by default. Generated by doing: - Selected CONFIG_MACH_IMX35_DT and CONFIG_SOC_IMX50 via 'make menuconfig' - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-23 13:27:58 -02:00
CONFIG_SOC_IMX50=y
ARM: imx_v6_v7_defconfig updates The rtc isl1208 driver is used by mx6 nitrogen board, so let's enable it by default. The fsl sai driver is used by the vf610-twr board, so let's enable it by default. simple-audio-card driver is used by the vf610-twr board, so let's enable it by default. Generated this patch by doing: - make imx_v6_v7_defconfig - make menuconfig and manually select options - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig ,which results in some additional cleanups. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-09 23:40:41 -03:00
CONFIG_SOC_IMX51=y
ARM: imx53: support device tree boot only With device tree kernel provides the equal support as those imx53 board files, it's time to remove the board files and get imx53 support device tree only. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-12 23:21:39 +08:00
CONFIG_SOC_IMX53=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_SOC_IMX6Q=y
ARM: imx: Enable mx6 solo-lite support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-23 20:41:48 -03:00
CONFIG_SOC_IMX6SL=y
ARM: imx_v6_v7_defconfig: enable imx6sll by default enable i.mx6sll support by default in defconfig. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-13 16:04:24 +08:00
CONFIG_SOC_IMX6SLL=y
ARM: imx_v6_v7_defconfig: Select CONFIG_SOC_IMX6SX Let mx6sx be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-16 21:15:52 -03:00
CONFIG_SOC_IMX6SX=y
ARM: imx: imx_v6_v7_defconfig enable imx6ul support default enable imx6ul support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-10 02:09:46 +08:00
CONFIG_SOC_IMX6UL=y
ARM: config: imx_v6_v7_defconfig add imx7d support Add imx7d support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-08 01:35:58 +08:00
CONFIG_SOC_IMX7D=y
ARM: imx_v6_v7_defconfig: add imx7ulp support Select CONFIG_SOC_IMX7ULP by default. Patch generated via make ARCH=arm savedefconfig Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-10 15:13:16 +00:00
CONFIG_SOC_IMX7ULP=y
ARM: imx_v6_v7_defconfig: build in audio driver Add ASRC, FSL_ASOC_CARD, CS42xx8 support Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-18 14:08:01 +08:00
CONFIG_SOC_VF610=y
ARM: imx_v6_v7_defconfig: Select PCI support Let PCI driver be enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-30 11:12:01 -02:00
CONFIG_PCI=y
ARM: imx_v6_v7_defconfig: enable PCI_MSI This has been stable on i.MX6 for a good while now and there is no reason to keep it disabled, as it allows to allocate non-shared IRQs if several PCIe devices are connected to a single host. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-30 18:00:11 +01:00
CONFIG_PCI_MSI=y
ARM: imx_v6_v7_defconfig: Select PCI support Let PCI driver be enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-30 11:12:01 -02:00
CONFIG_PCI_IMX6=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_SMP=y
ARM: imx_v6_v7_defconfig: enable psci default i.MX7D uboot support psci firmware. Enabled psci default. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-05 11:17:16 -06:00
CONFIG_ARM_PSCI=y
ARM: imx_v6_v7_defconfig: Select CONFIG_HIGHMEM Booting a mx6q wandboard with 2GB of RAM we see the following on boot: Booting Linux on physical CPU 0x0 Linux version 3.12.0-next-20131112+ (fabio@fabio-Latitude-E6410) (gcc version 43 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Wandboard i.MX6 Quad Board Truncating RAM at 10000000-8fffffff to -7f7fffff (vmalloc region overlap) ... Select CONFIG_HIGHMEM to avoid the vmalloc region overlap. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-12 20:39:12 -02:00
CONFIG_HIGHMEM=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
CONFIG_FORCE_MAX_ZONEORDER=14
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
ARM: imx_v6_v7_defconfig: Enable kexec support Select CONFIG_KEXEC by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-17 10:46:17 -03:00
CONFIG_KEXEC=y
ARM: imx_v6_v7_defconfig: enable cpufreq and CMA support - Enable imx6 cpufreq support with ondemand governor - Enable CMA support so that device like 1080p HDMI can work - Run savedefconfig Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-10 14:53:34 +08:00
CONFIG_CPU_FREQ=y
ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT It is very useful for user to retrieve cpufreq transtion statistics and worth to be default enabled. Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-06 10:45:51 +08:00
CONFIG_CPU_FREQ_STAT=y
ARM: imx_v6_v7_defconfig: enable cpufreq and CMA support - Enable imx6 cpufreq support with ondemand governor - Enable CMA support so that device like 1080p HDMI can work - Run savedefconfig Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-10 14:53:34 +08:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
ARM: imx_v6_v7_defconfig: Enable cpufreq governors Enable more common cpufreq governors in imx defconfig because this is very useful for testing. In particular you can't use cpufreq-set -f $FREQ without explicitly defining CONFIG_CPU_FREQ_GOV_USERSPACE=y. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-02 17:46:00 +03:00
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
ARM: imx_v6_v7_defconfig: select the CONFIG_CPUFREQ_DT Select CONFIG_CPUFREQ_DT by default to enable cpu-freq driver for i.MX7D. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-05 03:51:44 +08:00
CONFIG_CPUFREQ_DT=y
ARM: imx_v6_v7_defconfig: enable cpufreq and CMA support - Enable imx6 cpufreq support with ondemand governor - Enable CMA support so that device like 1080p HDMI can work - Run savedefconfig Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-10 14:53:34 +08:00
CONFIG_ARM_IMX6Q_CPUFREQ=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_CPU_IDLE=y
ARM: imx_v6_v7_defconfig: select CONFIG_ARM_CPUIDLE by default Some i.MX platforms like i.MX7S/D uses generic ARM cpuidle driver and psci method to support cpuidle feature, select CONFIG_ARM_CPUIDLE by default for such platforms. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-29 13:00:47 +08:00
CONFIG_ARM_CPUIDLE=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 11:13:48 -03:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BINFMT_MISC=m
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
ARM: imx: configs: enable netfilter support The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-05 09:33:19 +01:00
CONFIG_NETFILTER=y
ARM: imx_v6_v7_defconfig: Enable flexcan driver for can support Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-01 13:09:02 +02:00
CONFIG_CAN=y
CONFIG_CAN_FLEXCAN=y
ARM: imx_v6_v7_defconfig: Enable Bluetooth support Enable Bluetooth over serial support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-13 14:48:31 -03:00
CONFIG_BT=y
ARM: imx_v6_v7_defconfig: Enable BT_BNEP This is necessary to support network over bluetooth: | Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: kernel lacks bnep-protocol support | Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: System does not support network plugin Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-25 20:20:26 -02:00
CONFIG_BT_BNEP=m
ARM: imx_v6_v7_defconfig: Enable Bluetooth support Enable Bluetooth over serial support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-13 14:48:31 -03:00
CONFIG_BT_HCIUART=y
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs CONFIG_BT_HCIUART_LL. APF6Dev carrier board has a SX8654 I2C touchscreen controller. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 15:44:28 +02:00
CONFIG_BT_HCIUART_LL=y
ARM: imx_v6_v7_defconfig: Enable wireless support Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-31 13:15:04 -03:00
CONFIG_CFG80211=y
ARM: imx_v6_v7_defconfig: Select wireless extensions option Select CONFIG_CFG80211_WEXT so that wireless can work out of the box when using userspace tools such as 'iwconfig'. Generated by manually selecting CONFIG_CFG80211_WEXT and then running: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig , which results in additional cleanup. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-12-31 15:15:59 -02:00
CONFIG_CFG80211_WEXT=y
ARM: imx_v6_v7_defconfig: Enable wireless support Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-31 13:15:04 -03:00
CONFIG_MAC80211=y
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
# CONFIG_STANDALONE is not set
ARM: imx_v6_v7_defconfig: add CONFIG_FW_LOADER_USER_HELPER To support loading sdma firmware automatically from rootfs, enable CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK. Please get sdma firmware from below link and put it into rootfs entry -- /lib/firmware/imx/sdma/: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-07 02:20:55 +08:00
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
ARM: imx_v6_v7_defconfig: Increase CMA size Increase the CMA size to 64 MiB, otherwise it isn't possible to use etnaviv driver on systems with 1920x1080 panel due to insufficient memory . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-17 18:34:11 +02:00
CONFIG_CMA_SIZE_MBYTES=64
ARM: imx_v6_v7_defconfig: enable WEIM driver enable the weim driver. Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto, we also enable the MTD_PHYSMAP_OF module. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-08 15:16:03 +08:00
CONFIG_IMX_WEIM=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_CONNECTOR=y
ARM: imx_v6_v7_defconfig: Add SPI NOR support Add SPI NOR support in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-27 01:05:02 -03:00
CONFIG_MTD=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
ARM: imx_v6_v7_defconfig: enable WEIM driver enable the weim driver. Since the NOR is connected to the WEIM for imx6q{dl}-sabreauto, we also enable the MTD_PHYSMAP_OF module. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-08 15:16:03 +08:00
CONFIG_MTD_PHYSMAP_OF=y
ARM: imx_v6_v7_defconfig: Add SPI NOR support Add SPI NOR support in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-27 01:05:02 -03:00
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 16:47:44 +01:00
CONFIG_MTD_RAW_NAND=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_MTD_NAND_GPMI_NAND=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_MTD_NAND_VF610_NFC=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_MTD_NAND_MXC=y
ARM: imx/mxs defconfigs: add MTD_SPI_NOR (new dependency for M25P80) These defconfigs contain the CONFIG_M25P80 symbol, which is now dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy the new dependency. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-30 23:26:36 -07:00
CONFIG_MTD_SPI_NOR=y
ARM: imx_v6_v7_defconfig: Select SPI_FSL_QUADSPI by default SPI_FSL_QUADSPI can be used by Vybrid and mx6sx, so select it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-16 17:30:30 -02:00
CONFIG_SPI_FSL_QUADSPI=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_MTD_UBI=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_BLOCK=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_ATA=y
ARM: imx_v6_v7_defconfig: Add SATA support Let SATA support be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:16 -03:00
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_IMX=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_PATA_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_NETDEVICES=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
# CONFIG_NET_VENDOR_BROADCOM is not set
CS89x0 : add CS89x0 platform device to the iMX31ADS board Add CS89x0 networking support to the iMX31ADS board by using the platform driver support in the CS89x0 driver. Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-01-26 21:47:27 +01:00
CONFIG_CS89x0=y
CONFIG_CS89x0_PLATFORM=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
CONFIG_SMC911X=y
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: imx: update imx_v6_v7_defconfig Update the IMX v6/v7 defconfig for the SolidRun HummingBoard: - Add AT803X ethernet phy - Add consumer IR devices Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-17 19:42:47 +00:00
CONFIG_AT803X_PHY=y
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY The driver for Micrel PHYs is required for the Apalis iMX6 module plugged into a Ixora carrier board featuring an on-module Micrel KSZ9031 Gigabit PHY. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-29 22:40:19 +02:00
CONFIG_MICREL_PHY=y
ARM: imx_v6_v7_defconfig: Select SMSC_PHY The imx6sl-evk board has a LAN8720A ethernet phy supported by SMSC_PHY. Add this driver to the default imx config since the device is present on one of the evaluation boards. This used to work mostly fine with the generic phy driver until commit 0878fff1f42c ("net: phy: Do not perform software reset for Generic PHY"). The fact that soft reset is no longer performed apparently causes RX to sometimes failes which can cause netboot to timeout on DHCP. This is eventually retried and it works after link up/down but can takes 90 seconds to reach the login prompt. This was generated with "make savedefconfig" and it includes a few additional minor cleanups. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29 13:48:02 +03:00
CONFIG_SMSC_PHY=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot Chips such as imx6sll and imx7ulp have no ethernet support so the common development usecase of nfs boot is supported via usb ethernet dongles. Add drivers for additional usbnet device directly into the kernel image produced by the imx defconfig. This list is based on the usbnet devices supported by uboot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27 15:32:39 +03:00
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board At some boards, it has no ethernet support. As an alternative, we can use USB Ethernet card to support NFS (u-boot supports it too). It supports AXIS cards which are used most frequently. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-03 15:12:04 +08:00
CONFIG_USB_USBNET=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_NET_CDC_EEM=m
ARM: imx_v6_v7_defconfig: Make usbnet drivers builtin for boot Chips such as imx6sll and imx7ulp have no ethernet support so the common development usecase of nfs boot is supported via usb ethernet dongles. Add drivers for additional usbnet device directly into the kernel image produced by the imx defconfig. This list is based on the usbnet devices supported by uboot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-27 15:32:39 +03:00
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_MCS7830=y
ARM: imx_v6_v7_defconfig: Enable wireless support Wandboard has a Broadcom 4329 chipset connected to SDHC, so turn on the wireless related options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-31 13:15:04 -03:00
CONFIG_BRCMFMAC=m
ARM: imx_v6_v7_defconfig: add mwifiex driver Enable Marvell mwifiex driver which is required to drive the Wi2Wi WM828CC6 wireless module found on Colibri iMX6ULL. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-18 21:15:09 +01:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_PCIE=m
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs CONFIG_BT_HCIUART_LL. APF6Dev carrier board has a SX8654 I2C touchscreen controller. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 15:44:28 +02:00
CONFIG_WL12XX=m
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM This patch adds the missing configs for the DART-MX6 SoM support : - SERDEV bluetooth driver + SERIAL_DEV_BUS configs - WL18XX driver - DEFAULT_ON Led Trigger Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-04 10:21:10 +01:00
CONFIG_WL18XX=m
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs CONFIG_BT_HCIUART_LL. APF6Dev carrier board has a SX8654 I2C touchscreen controller. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 15:44:28 +02:00
CONFIG_WLCORE_SDIO=m
# CONFIG_WILINK_PLATFORM_DATA is not set
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_KEYBOARD_GPIO=y
ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off build in snvs powerkey build in syscon power off support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-09 01:23:00 +08:00
CONFIG_KEYBOARD_SNVS_PWRKEY=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_KEYBOARD_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: imx_v6_v7_defconfig: Select ADS7846 support Add CONFIG_TOUCHSCREEN_ADS7846 support. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-22 16:37:10 -03:00
CONFIG_TOUCHSCREEN_ADS7846=y
ARM: imx_v6_v7_defconfig: Select CONFIG_TOUCHSCREEN_EGALAX egalax touchscren controller is present on mx6 sabresd/sabrelite, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-24 17:20:04 -03:00
CONFIG_TOUCHSCREEN_EGALAX=y
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch screen by default on Digi International's AUO/Goodix LCD accessory kit used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board. Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-25 17:09:32 +02:00
CONFIG_TOUCHSCREEN_GOODIX=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Checked that all the removed options are still enabled by Kconfig logic. The exception is CONFIG_SOC_CAMERA_OV2640, which is only used by some mx31 machines. As the mx3_camera driver has been removed from the kernel tree, removing CONFIG_SOC_CAMERA_OV2640 is not an issue. So keep it in sync to help further changes in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-14 15:12:19 -02:00
CONFIG_TOUCHSCREEN_MAX11801=y
ARM: imx_v6_v7_defconfig: enable imx6ul_tsc Enable imx6ul touchscreen controller Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-08-28 17:09:34 +08:00
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Those two touch controllers are used by Boundary Devices platforms. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-02 18:25:49 +02:00
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_TOUCHSCREEN_MC13783=y
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support Those two touch controllers are used by Boundary Devices platforms. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-02 18:25:49 +02:00
CONFIG_TOUCHSCREEN_TSC2004=y
ARM: imx_v6_v7_defconfig: Enable tsc2007 support. The eukrea cpuimx35 and cpuimx51 have a tsc2007 touchscreen controller, so we turn it on. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-30 18:58:43 +01:00
CONFIG_TOUCHSCREEN_TSC2007=y
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen Enable STMPE touchscreen support as this is used on M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-17 02:19:41 +01:00
CONFIG_TOUCHSCREEN_STMPE=y
ARM: imx_v6_v7_defconfig: updates for Armadeus Systems APF6 boards APF6 Dual and Quad SoM have an wl1271 wifi/bt chip. This chip needs CONFIG_BT_HCIUART_LL. APF6Dev carrier board has a SX8654 I2C touchscreen controller. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-15 15:44:28 +02:00
CONFIG_TOUCHSCREEN_SX8654=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_SERIO_SERPORT=m
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
# CONFIG_LEGACY_PTYS is not set
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
ARM: imx_v6_v7_defconfig: Enable FSL_LPUART support Enable the FSL_LPUART driver as it is used by the VF610 family. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-27 09:48:41 -03:00
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM This patch adds the missing configs for the DART-MX6 SoM support : - SERDEV bluetooth driver + SERIAL_DEV_BUS configs - WL18XX driver - DEFAULT_ON Led Trigger Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-04 10:21:10 +01:00
CONFIG_SERIAL_DEV_BUS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
# CONFIG_I2C_COMPAT is not set
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_I2C_CHARDEV=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
CONFIG_I2C_MUX=y
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO I2C muxing is used on Nitrogen6_MAX board from Boundary Devices. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-02 18:25:50 +02:00
CONFIG_I2C_MUX_GPIO=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO The GPIO-based bitbanging I2C driver is required to make HDMI work on the Apalis iMX6 module plugged into a Ixora carrier board featuring a DDC channel to read a screen's EDID being hooked up to regular GPIOs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-29 22:40:18 +02:00
CONFIG_I2C_GPIO=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_I2C_IMX=y
ARM: imx: Fix the removal of CONFIG_SPI option Since 64546e9fe3a5b8c ("ARM: imx_v6_v7_defconfig updates") and commit 0650f855d2e4b0b9 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI selection was dropped by savedefconfig for imx_v4_v5_defconfig and imx_v6_v7_defconfig. In order to keep the same behaviour as previous kernel versions and avoid regressions, let's add CONFIG_SPI option back. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-04 08:28:47 -02:00
CONFIG_SPI=y
ARM: imx_v6_v7_defconfig: Enable SPI_GPIO Some boards like imx7d-sdb provide SPIO functionality via GPIOs, so enable the CONFIG_SPI_GPIO option. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-30 17:43:04 -03:00
CONFIG_SPI_GPIO=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_SPI_IMX=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_SPI_FSL_DSPI=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_GPIO_SYSFS=y
ARM: imx_v6_v7_defconfig: Select CONFIG_GPIO_MAX732X by default Enable max7320 IO expander for i.MX platforms. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-26 14:58:18 +08:00
CONFIG_GPIO_MAX732X=y
ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 On mx35pdk board there is an 8-bit microcontroller that controls several IOs, such as backlight enable pin, USB host VBUS, etc. Let it build by default. mx35pdk also needs CONFIG_LCD_PLATFORM to be selected to activate the display, so also make this the default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-09-14 15:25:45 -03:00
CONFIG_GPIO_MC9S08DZ60=y
ARM: imx_v6_v7_defconfig: Add CONFIG_GPIO_PCA953X It is used for max7310 gpio expandor which is used at imx6qdl sabreauto board. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-13 14:21:44 +08:00
CONFIG_GPIO_PCA953X=y
ARM: imx_v6_v7_defconfig: Enable STMPE gpio support Enable STMPE gpio support as this is used on MX6 Data Modul edm-qmx6 board. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-01 13:08:58 +02:00
CONFIG_GPIO_STMPE=y
ARM: imx_v6_v7_defconfig: Enable GPIO_74X164 imx7d-sabresd board uses a 74LV595PW SPI expander to drive several peripherals, such as Ethernet reset, PCI reset, LCD power, etc. Enabled this option by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-30 17:43:05 -03:00
CONFIG_GPIO_74X164=y
ARM: imx_v6_v7_defconfig: add POWER_RESET_SYSCON Add POWER_RESET_SYSCON since Vybrid SoC's now make use of this driver to provide software reset capabilities through the SRC module. Also regenerated using savedefconfig which removed the config BACKLIGHT_LCD_SUPPORT which is now selected by default since commit 9c8ee3c734139 ("video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT"). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-12-02 18:12:00 +01:00
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
ARM: imx_v6_v7_defconfig: enable powerkey and syscon power off build in snvs powerkey build in syscon power off support Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-07-09 01:23:00 +08:00
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
ARM: imx_v6_v7_defconfig: Select wireless extensions option Select CONFIG_CFG80211_WEXT so that wireless can work out of the box when using userspace tools such as 'iwconfig'. Generated by manually selecting CONFIG_CFG80211_WEXT and then running: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig , which results in additional cleanup. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-12-31 15:15:59 -02:00
CONFIG_POWER_SUPPLY=y
ARM: imx_v6_v7_defconfig: Select CONFIG_SENSORS_MC13783_ADC Select the MC13783/MC13892 ADC functionality by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-26 13:05:22 -03:00
CONFIG_SENSORS_MC13783_ADC=y
ARM: defconfig: imx_v6_v7_defconfig updates This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-22 07:55:03 +08:00
CONFIG_SENSORS_GPIO_FAN=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_SENSORS_IIO_HWMON=y
ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing Setting trip points is supported by the imx thermal driver and it is useful to be able to test this without adjusting config. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-08 19:26:57 +03:00
CONFIG_THERMAL_WRITABLE_TRIPS=y
ARM: defconfig: imx_v6_v7_defconfig updates This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-22 07:55:03 +08:00
CONFIG_CPU_THERMAL=y
CONFIG_IMX_THERMAL=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_WATCHDOG=y
ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver. Enable these options by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-02 10:34:04 +01:00
CONFIG_DA9062_WATCHDOG=y
ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support All recent emtrion modules based on i.mx6 make use of the DA9063. Therefore enable it with the following defaults: - CONFIG_MFD_DA9063=y - CONFIG_REGULATOR_DA9063=y - CONFIG_DA9063_WATCHDOG=m MFD and REGULATOR are built-in to have it at Kernel boot-time. The WATCHDOG is optional and could be loaded from userspace. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-27 16:04:04 +01:00
CONFIG_DA9063_WATCHDOG=m
ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-18 21:15:08 +01:00
CONFIG_RN5T618_WATCHDOG=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_IMX2_WDT=y
ARM: imx_v6_v7_defconfig: Add DA9052 regulator support Add DA9052 regulator support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-09-26 20:27:37 -03:00
CONFIG_MFD_DA9052_I2C=y
ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver. Enable these options by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-02 10:34:04 +01:00
CONFIG_MFD_DA9062=y
ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support All recent emtrion modules based on i.mx6 make use of the DA9063. Therefore enable it with the following defaults: - CONFIG_MFD_DA9063=y - CONFIG_REGULATOR_DA9063=y - CONFIG_DA9063_WATCHDOG=m MFD and REGULATOR are built-in to have it at Kernel boot-time. The WATCHDOG is optional and could be loaded from userspace. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-27 16:04:04 +01:00
CONFIG_MFD_DA9063=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-18 21:15:08 +01:00
CONFIG_MFD_RN5T618=y
ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen Enable STMPE touchscreen support as this is used on M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-17 02:19:41 +01:00
CONFIG_MFD_STMPE=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_REGULATOR=y
ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE Some devices on some imx boards are supplied by fixed voltage, so build REGULATOR_FIXED_VOLTAGE support in. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-27 15:36:38 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc Eanble anatop regulator and snvs rtc support which are very useful for imx6q build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:12:59 +08:00
CONFIG_REGULATOR_ANATOP=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_REGULATOR_DA9052=y
ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver. Enable these options by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-02 10:34:04 +01:00
CONFIG_REGULATOR_DA9062=y
ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support All recent emtrion modules based on i.mx6 make use of the DA9063. Therefore enable it with the following defaults: - CONFIG_MFD_DA9063=y - CONFIG_REGULATOR_DA9063=y - CONFIG_DA9063_WATCHDOG=m MFD and REGULATOR are built-in to have it at Kernel boot-time. The WATCHDOG is optional and could be loaded from userspace. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-27 16:04:04 +01:00
CONFIG_REGULATOR_DA9063=y
ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35. The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-10 16:40:41 +01:00
CONFIG_REGULATOR_GPIO=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 13:40:21 -02:00
CONFIG_REGULATOR_MC13783=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_REGULATOR_MC13892=y
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 PFUZE100 regulator is commonly found on mx6 based designs. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-12-24 01:04:50 -02:00
CONFIG_REGULATOR_PFUZE100=y
ARM: imx_v6_v7_defconfig: add RN5T618 PMIC family support This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-18 21:15:08 +01:00
CONFIG_REGULATOR_RN5T618=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Checked that all the removed options are still enabled by Kconfig logic. The exception is CONFIG_SOC_CAMERA_OV2640, which is only used by some mx31 machines. As the mx3_camera driver has been removed from the kernel tree, removing CONFIG_SOC_CAMERA_OV2640 is not an issue. So keep it in sync to help further changes in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-14 15:12:19 -02:00
CONFIG_RC_CORE=y
CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 13:40:21 -02:00
CONFIG_MEDIA_SUPPORT=y
ARM: imx: configs: Enable CONFIG_MEDIA_CAMERA_SUPPORT Since commit b4c184e5 (edia] media: reorganize the main Kconfig items), it is necessary to select CONFIG_MEDIA_CAMERA_SUPPORT in order to be able to use the SoC camera drivers. Select CONFIG_MEDIA_CAMERA_SUPPORT so that we can use mx2-camera/mx3-camera by default as previously. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-10-07 14:44:17 -03:00
CONFIG_MEDIA_CAMERA_SUPPORT=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_V4L_PLATFORM_DRIVERS=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
CONFIG_VIDEO_MUX=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 13:40:21 -02:00
CONFIG_SOC_CAMERA=y
ARM: imx_v6_v7_defconfig: Enable VPU driver Let VPU driver be selected by default. VPU driver requires a SRAM pool, so select CONFIG_SRAM as well. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 19:49:19 -03:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
ARM: imx_v6_v7_defconfig: Select the coda driver as module The coda driver may be probed prior to the rootfs being available, leading to firmware loading failure. To avoid such problem, select the coda driver as module. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-07 12:06:45 -03:00
CONFIG_VIDEO_CODA=m
ARM: imx_v6_v7_defconfig: Select the PXP driver The Pixel Pipeline (PXP) block is present on several i.MX SoCs such as imx6dl, imx6sl, imx6ul, imx6sx, imx6ull and imx7d. Select the PXP driver by default. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-06 10:03:43 -02:00
CONFIG_VIDEO_IMX_PXP=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_VIDEO_OV5640=m
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE Since commit 39b9004d1f (gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging) the ipuv3 core driver is no longer built bey default. Select CONFIG_IMX_IPUV3_CORE so that the core ipuv3 code can be built again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20 00:02:24 -03:00
CONFIG_IMX_IPUV3_CORE=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_DRM=y
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM This patch adds the missing configs for the DART-MX6 SoM support : - SERDEV bluetooth driver + SERIAL_DEV_BUS configs - WL18XX driver - DEFAULT_ON Led Trigger Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-04 10:21:10 +01:00
CONFIG_DRM_PANEL_LVDS=y
ARM: imx_v6_v7_defconfig: Add more drm drivers. The DRM_PANEL_SIMPLE is needed by the eukrea mbimxsd51's displays. Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-07 14:44:51 +02:00
CONFIG_DRM_PANEL_SIMPLE=y
ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G imx6sl-evk, imx6sll-evk and imx6sx-sdb boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-20 17:39:21 -03:00
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
ARM: imx_v6_v7_defconfig: Select HDMI audio support Select CONFIG_DRM_DW_HDMI_AHB_AUDIO so that we have HDMI audio supported by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-16 13:20:38 -02:00
CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
ARM: imx_v6_v7_defconfig: Select the CEC driver Select CONFIG_DRM_DW_HDMI_CEC option, so that the CEC driver can be loaded by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-20 10:56:10 -03:00
CONFIG_DRM_DW_HDMI_CEC=y
ARM: imx_v6_v7_defconfig: build in audio driver Add ASRC, FSL_ASOC_CARD, CS42xx8 support Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-18 14:08:01 +08:00
CONFIG_DRM_IMX=y
CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
CONFIG_DRM_IMX_TVE=y
CONFIG_DRM_IMX_LDB=y
CONFIG_DRM_IMX_HDMI=y
ARM: imx_v6_v7_defconfig: Enable GPU support Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default. Generated by manually selecting CONFIG_DRM_ETNAVIV and then running: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig ,which results in additional cleanup. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-08 17:51:14 -03:00
CONFIG_DRM_ETNAVIV=y
ARM: imx_v6_v7_defconfig: use MXSFB DRM driver Use the the DRM driver for MXSFB LCD controller (used in i.MX23/ i.MX28/i.MX6SX or i.MX7). Remove CONFIG_FB_MXS which will soon be removed. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-12 12:59:42 +02:00
CONFIG_DRM_MXSFB=y
CONFIG_FB_MODE_HELPERS=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 13:40:21 -02:00
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_LCD_PLATFORM=y
ARM: imx_v6_v7_defconfig: Enable PWM and backlight options These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-06 12:56:30 -03:00
CONFIG_BACKLIGHT_PWM=y
ARM: imx_v6_v7_defconfig: Enable backlight gpio support. The eukrea mbimxsd51 has a gpio backlight for its LCD display, so we turn that driver on. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-10 16:07:24 +01:00
CONFIG_BACKLIGHT_GPIO=y
ARM: imx_v6_v7_defconfig: Add support for framebuffer and camera on mx31 Let framebuffer and camera support be built by default on mx31. Tested on a mx31pdk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-14 13:40:21 -02:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_SOUND=y
CONFIG_SND=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_SND_USB_AUDIO=m
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_SND_SOC=y
ARM: imx_v6_v7_defconfig: build in audio driver Add ASRC, FSL_ASOC_CARD, CS42xx8 support Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-18 14:08:01 +08:00
CONFIG_SND_SOC_FSL_ASRC=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
ARM: imx_v6_v7_defconfig: Select the es8328 codec driver Select CONFIG_SND_SOC_ES8328 so that we can have audio functional by default on Kosagi Novena boards. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-10-17 18:34:33 +02:00
CONFIG_SND_SOC_IMX_ES8328=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_SND_SOC_IMX_SGTL5000=y
ARM: imx_v6_v7_defconfig: Add SPDIF support Generated by doing: make imx_v6_v7_defconfig Manually selected the IMX_SPDIF driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-28 17:27:06 -03:00
CONFIG_SND_SOC_IMX_SPDIF=y
ARM: imx: Re-select CONFIG_SND_SOC_IMX_MC13783 option Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de649f (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-12 08:55:53 -03:00
CONFIG_SND_SOC_IMX_MC13783=y
ARM: imx_v6_v7_defconfig: build in audio driver Add ASRC, FSL_ASOC_CARD, CS42xx8 support Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-18 14:08:01 +08:00
CONFIG_SND_SOC_FSL_ASOC_CARD=y
ARM: imx_v6_v7_defconfig: Enable AC97 codec support imx6qdl udoo board has an AC97 codec. Add support for it by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-18 10:45:27 -02:00
CONFIG_SND_SOC_AC97_CODEC=y
ARM: imx_v6_v7_defconfig: build in audio driver Add ASRC, FSL_ASOC_CARD, CS42xx8 support Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-18 14:08:01 +08:00
CONFIG_SND_SOC_CS42XX8_I2C=y
ARM: defconfig: imx_v6_v7_defconfig updates This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-22 07:55:03 +08:00
CONFIG_SND_SOC_TLV320AIC3X=y
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver Select CONFIG_SND_SOC_WM8960 so that we can have audio functional by default on imx6ul-evk and imx7-sdb boards. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-28 21:33:17 -03:00
CONFIG_SND_SOC_WM8960=y
ARM: imx_v6_v7_defconfig: Select CONFIG_SND_SOC_WM8962 explicitly Currently CONFIG_SND_SOC_WM8962 is selected via SND_SOC_IMX_WM8962 machine driver option. SND_SOC_IMX_WM8962 will be removed in the next kernel cycle, so select the codec driver directly so that it can still be used by default via the generic fsl-asoc-card machine driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-01 16:08:56 -03:00
CONFIG_SND_SOC_WM8962=y
ARM: imx_v6_v7_defconfig updates The rtc isl1208 driver is used by mx6 nitrogen board, so let's enable it by default. The fsl sai driver is used by the vf610-twr board, so let's enable it by default. simple-audio-card driver is used by the vf610-twr board, so let's enable it by default. Generated this patch by doing: - make imx_v6_v7_defconfig - make menuconfig and manually select options - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig ,which results in some additional cleanups. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-09 23:40:41 -03:00
CONFIG_SND_SIMPLE_CARD=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Checked that all the removed options are still enabled by Kconfig logic. The exception is CONFIG_SOC_CAMERA_OV2640, which is only used by some mx31 machines. As the mx3_camera driver has been removed from the kernel tree, removing CONFIG_SOC_CAMERA_OV2640 is not an issue. So keep it in sync to help further changes in defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-14 15:12:19 -02:00
CONFIG_HID_MULTITOUCH=y
mx5: Add USB to Freescale MX51 defconfig Update mx51_defconfig to include USB EHCI by default. This patch applies to 2.6.34-rc6. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-30 15:48:27 -05:00
CONFIG_USB=y
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES This is very helpful debugging USB issues. Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-25 20:20:27 -02:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
mx5: Add USB to Freescale MX51 defconfig Update mx51_defconfig to include USB EHCI by default. This patch applies to 2.6.34-rc6. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-30 15:48:27 -05:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_USB_STORAGE=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-08 19:06:29 -03:00
CONFIG_USB_CHIPIDEA=y
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-28 17:27:07 -03:00
CONFIG_USB_CHIPIDEA_UDC=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-08 19:06:29 -03:00
CONFIG_USB_CHIPIDEA_HOST=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_OPTION=m
ARM: imx_v6_v7_defconfig: enable more USB configurations - USB test module - USB gadget functions using configfs which are just ready within several release cycles. - USB audio gadget Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-02 16:22:06 +08:00
CONFIG_USB_TEST=m
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_EHSET_TEST_FIXTURE=m
ARM: imx_v6_v7_defconfig: Select CONFIG_NOP_USB_XCEIV by default In order to get USB functionality on mx5 boards, we need to select CONFIG_NOP_USB_XCEIV option, so let's enable it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-24 22:50:17 -03:00
CONFIG_NOP_USB_XCEIV=y
ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support Add Chipidea USB driver support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-08-08 19:06:29 -03:00
CONFIG_USB_MXS_PHY=y
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-28 17:27:07 -03:00
CONFIG_USB_GADGET=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_USB_FSL_USB2=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
ARM: imx_v6_v7_defconfig: enable more USB configurations - USB test module - USB gadget functions using configfs which are just ready within several release cycles. - USB audio gadget Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-02 16:22:06 +08:00
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
CONFIG_USB_CONFIGFS_F_UVC=y
CONFIG_USB_CONFIGFS_F_PRINTER=y
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_ZERO=m
ARM: imx_v6_v7_defconfig: enable more USB configurations - USB test module - USB gadget functions using configfs which are just ready within several release cycles. - USB audio gadget Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-02 16:22:06 +08:00
CONFIG_USB_AUDIO=m
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-28 17:27:07 -03:00
CONFIG_USB_ETH=m
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
ARM: imx_v6_v7_defconfig: enable USB FFS gadget The USB Function FS gadget can be very useful for debugging. For instance, the adbd daemon can leverage this gadget to offer an ADB connection to the platform over USB. Note that adbd is available on many OS/build systems: - Ubuntu: see android-tools-adbd package [1] - Yocto: see meta-smartphone android-tools recipe [2] - Buildroot: see android-tools package [3] [1] http://packages.ubuntu.com/trusty/android-tools-adbd [2] https://github.com/shr-distribution/meta-smartphone/tree/shr/meta-android/recipes-android/android-tools [3] https://git.buildroot.net/buildroot/tree/package/android-tools Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-06-21 10:05:57 +02:00
CONFIG_USB_FUNCTIONFS=m
ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support Generated by doing: make imx_v6_v7_defconfig Manually selected the CHIPIDEA_UDC driver make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-28 17:27:07 -03:00
CONFIG_USB_MASS_STORAGE=m
ARM: imx_v6_v7_defconfig: enable more USB functions USB Ethernet function at host mode USB Media function(webcam) at host mode USB Audio function at host mode USB Serial function at host mode USB EHSET driver at host mode (for OTG & EH Certification test) Several USB Gadget functions: - Configfs - NCM - Zero (used for test) - Gadgetfs - Serial Above functions are built as module. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-09-30 15:03:01 +08:00
CONFIG_USB_G_SERIAL=m
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_MMC=y
ARM i.MX5: update defconfig Rename it from mx51_defconfig to mx5_defconfig since the i.MX53 is now supported aswell. Also, remove the DEBUG_LL and enable some more drivers useful for i.MX5 boards. For supporting 1GiB of SDRAM vmsplit 2/2 is enabled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-24 09:15:30 +02:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_NEW_LEDS=y
ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y' This patch is to fix the warning below. arch/arm/configs/mx51_defconfig:113:warning: symbol value 'm' invalid for LEDS_CLASS Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-23 16:06:55 +08:00
CONFIG_LEDS_CLASS=y
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-09 18:02:03 -03:00
CONFIG_LEDS_GPIO=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_LEDS_PWM=y
ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-09 18:02:03 -03:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM This patch adds the missing configs for the DART-MX6 SoM support : - SERDEV bluetooth driver + SERIAL_DEV_BUS configs - WL18XX driver - DEFAULT_ON Led Trigger Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-04 10:21:10 +01:00
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
ARM: defconfig: imx_v6_v7_defconfig updates This is a squash of several imx_v6_v7_defconfig update patches. - Enable tlv320aic3x audio codec by default (Phytec PBAB01 board) - Enable DS1307 rtc and gpio fan by default (TBS2910 board) - Select thermal related drivers - Add SNVS power off driver Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-22 07:55:03 +08:00
CONFIG_RTC_DRV_DS1307=y
ARM: imx_v6_v7_defconfig updates The rtc isl1208 driver is used by mx6 nitrogen board, so let's enable it by default. The fsl sai driver is used by the vf610-twr board, so let's enable it by default. simple-audio-card driver is used by the vf610-twr board, so let's enable it by default. Generated this patch by doing: - make imx_v6_v7_defconfig - make menuconfig and manually select options - make savedefconfig - cp defconfig arch/arm/configs/imx_v6_v7_defconfig ,which results in some additional cleanups. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-09-09 23:40:41 -03:00
CONFIG_RTC_DRV_ISL1208=y
ARM: imx_v6_v7_defconfig: Enable RTC PCF8523 support RTC PCF8523 is used on some mx6 cubox-i boards. Let it work by default. Reported-by: Rick Thomas <rbthomas@cube.rcthomas.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-04-29 11:11:41 -03:00
CONFIG_RTC_DRV_PCF8523=y
ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35. The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-10 16:40:41 +01:00
CONFIG_RTC_DRV_PCF8563=y
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80 The rv4168 RTC is used by the following platforms: - Nitrogen6_MAX (both Quad and Quad Plus versions) - Nitrogen7 Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-02 18:25:51 +02:00
CONFIG_RTC_DRV_M41T80=y
ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver. Enable these options by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-02 10:34:04 +01:00
CONFIG_RTC_DRV_DA9063=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_RTC_DRV_MC13XXX=y
rtc: rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 15:07:37 -07:00
CONFIG_RTC_DRV_MXC=y
ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2 Enable SRTC driver for i.MX53 in default config Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-18 12:51:33 +01:00
CONFIG_RTC_DRV_MXC_V2=y
ARM: imx_v6_v7_defconfig: enable anatop regulator and snvs rtc Eanble anatop regulator and snvs rtc support which are very useful for imx6q build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-29 23:12:59 +08:00
CONFIG_RTC_DRV_SNVS=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_DMADEVICES=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_FSL_EDMA=y
ARM i.MX: Update defconfig This updates the defconfig for i.MX3, i.MX5 and i.MX6. - all these can be compiled together now, so remove mx3_defconfig and mx5_defconfig and introduce a imx_v6_v7_defconfig instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-08 16:40:37 +01:00
CONFIG_IMX_SDMA=y
ARM: imx: gpmi-nand depends on mxs-dma It is not currently possible to build the gpmi-nand driver without also building the mxs-dma driver. Clarify this Kconfig and enable both in the defconfig file so we can build it again with both enabled. drivers/built-in.o: In function `gpmi_dma_filter': clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh' make[1]: *** [vmlinux] Error 1 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de>
2012-08-04 10:48:12 +00:00
CONFIG_MXS_DMA=y
ARM: imx_v6_v7_defconfig: add DMATEST support Add DMATEST support and remove invalid options, such as CONFIG_BT_HCIUART_H4 is default enabled and CONFIG_SND_SOC_IMX_WM8962 is out of date and not appear in any config file. Please refer to Documentation/driver-api/dmaengine/dmatest.rst to test MEMCPY feature of imx-sdma. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-13 21:08:47 +08:00
CONFIG_DMATEST=m
ARM: imx_v6_v7_defconfig: Select IPUV3 driver Let IPUV3 driver be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-25 10:07:52 -02:00
CONFIG_STAGING=y
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers Enable i.MX v4l2 media staging driver. For video capture on i.MX, the video multiplexer subdev is required. On the SabreAuto, the ADV7180 video decoder is required along with i2c-mux-gpio. The Sabrelite and SabreSD require the OV5640 and the SabreLite requires PWM clocks for the OV5640. Increase max zoneorder to allow larger video buffer allocations. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-07-16 20:26:42 -03:00
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
CONFIG_COMMON_CLK_PWM=y
ARM: imx_v6_v7_defconfig: Select VF610_ADC The vf610 adc driver is present on Vybrid, MX6SX, MX6UL and MX7D. Select it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-03 14:25:37 -02:00
CONFIG_IIO=y
ARM: imx_v6_v7_defconfig: Enable imx6qdl-sabreauto sensors CONFIG_SENSORS_ISL29018 supports isil,il29023 light sensor CONFIG_MMA8452 supports fsl,mma8451 accelerometer CONFIG_MAG3110 for fsl,mag3110 is already enabled Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-18 11:15:45 +03:00
CONFIG_MMA8452=y
ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC Select CONFIG_IMX7D_ADC so that the i.MX7 ADC driver can be built by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-17 18:02:54 -03:00
CONFIG_IMX7D_ADC=y
ARM: imx_v6_v7_defconfig: Select VF610_ADC The vf610 adc driver is present on Vybrid, MX6SX, MX6UL and MX7D. Select it by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-11-03 14:25:37 -02:00
CONFIG_VF610_ADC=y
ARM: imx_v6_v7_defconfig: Enable imx6qdl-sabreauto sensors CONFIG_SENSORS_ISL29018 supports isil,il29023 light sensor CONFIG_MMA8452 supports fsl,mma8451 accelerometer CONFIG_MAG3110 for fsl,mag3110 is already enabled Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-18 11:15:45 +03:00
CONFIG_SENSORS_ISL29018=y
ARM: imx: Update imx_v6_v7_defconfig for mag3110 support The i.MX 6UL EVK has support for the MAG3110 Magnetometer sensor, included in its base board by default. So add support for this Magnetometer in the imx_v6_v7_defconfig. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-09 09:46:24 -02:00
CONFIG_MAG3110=y
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115 Add MPL3115 NXP pressure sensor configuration. This sensor is used by warp7 board. Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-09 15:40:46 -03:00
CONFIG_MPL3115=y
ARM: imx_v6_v7_defconfig: Enable PWM and backlight options These options are useful for controlling backlight contrast via PWM. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-06 12:56:30 -03:00
CONFIG_PWM=y
ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid Enable configuration options useful for Vybrid: - NFC NAND driver - USB dual-role controller support - FTM PWM driver - DSPI SPI driver - Colibri VF50 Touchscreen support. Beside that, enable useful configurations such as IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid), PWM LED support and CPU idle support. Regenerated config using savedefconfig (which removes some configs which are now enabled by default). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-10 18:08:18 -08:00
CONFIG_PWM_FSL_FTM=y
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver After the pwm-imx driver was split into two drivers and the Kconfig symbol changed accordingly, use the new name to continue being able to use the PWM hardware. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-10 21:19:33 +01:00
CONFIG_PWM_IMX27=y
ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP Select the i.mx ocotp driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-01-30 12:35:07 -02:00
CONFIG_NVMEM_IMX_OCOTP=y
ARM: imx_v6_v7_defconfig: enable Vybrid OCOTP driver Enable the OCOTP NVMEM driver for Vybrid (vf610) SoCs. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-18 21:15:10 +01:00
CONFIG_NVMEM_VF610_OCOTP=y
ARM: imx_v6_v7_defconfig: enable OP-TEE This patch enables configs for Trusted Execution Environment(TEE) and Open Portable Trusted Execution Environment(OP-TEE). With Linux running in Trustzone non-secure world, OP-TEE OS runs in secure world, linux could use secure services provided by OP-TEE. With TEE/OP-TEE options selected, use the bindings in Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.txt to let the driver probe work. On i.MX6/7, now the bootflow is U-Boot->OP-TEE->Linux, OP-TEE will automatically create that node. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-01-05 17:40:35 +08:00
CONFIG_TEE=y
CONFIG_OPTEE=y
ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO In order to get ADV7180 analog video decoder to probe on a Gateworks GW51xx we need select CONFIG_MUX_MMIO, otherwise /dev/media node does not get created. Select CONFIG_MUX_MMIO, so that the ADV7180 driver can be correctly probed. Reported-by: Tim Harvey <tharvey@gateworks.com> Suggested-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-09-16 21:46:26 -03:00
CONFIG_MUX_MMIO=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
ARM: imx_v6_v7_defconfig: Select CONFIG_TMPFS_POSIX_ACL Andreas Müller reports: "Fixes: | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported and nasty follow-ups: Starting weston from sddm as unpriviledged user fails with some hints on missing access rights." Select the CONFIG_TMPFS_POSIX_ACL option to fix these issues. Reported-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 14:45:23 -03:00
CONFIG_TMPFS_POSIX_ACL=y
ARM: imx_v6_v7_defconfig: update features - Add sound support - Enable mtd support - Enable i.MX NAND support - Enable NOR flash support - Enable JFFS2/UBI - Enable clk debugfs support - Disable iommu support which is not present on i.MX - Enable MC13xxx RTC - Enable RNGA random number generator - Enable SPI EEPROM support - Enable I2C EEPROM support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-26 13:52:08 -03:00
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
mx51: Let USB Storage be built by default Let USB Storage be built by default. Also select NLS_ISO8859 so that the USB device can be mounted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-05-28 11:11:34 -03:00
CONFIG_NLS_ISO8859_1=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_SECURITYFS=y
ARM: imx_v6_v7_defconfig: Select CAAM Select CAAM for i.MX6 devices. Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Tested-by: Horia Geantă <horia.geanta@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-05 11:28:47 -07:00
CONFIG_CRYPTO_DEV_FSL_CAAM=y
ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARA Select the sahara crypto driver that is used on i.MX53. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-02-08 18:07:53 -02:00
CONFIG_CRYPTO_DEV_SAHARA=y
ARM: imx_v6_v7_defconfig: Enable CRYPTO_DEV_MXS_DCP This block is present in 6sl, 6sll and 6ull so it should be enabled in the default imx kernel config. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-17 12:37:55 +00:00
CONFIG_CRYPTO_DEV_MXS_DCP=y
mxc: Add mx51_defconfig This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 00:57:20 +02:00
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
ARM: imx_v6_v7_defconfig: Cleanup imx_v6_v7_defconfig Generate imx_v6_v7_defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig No functional change. The goal here is to cleanup imx_v6_v7_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-29 00:04:15 -03:00
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
ARM: imx_v6_v7_defconfig: Re-sync defconfig Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v6_v7_defconfig and only keep the options that were moved around. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-03 11:13:48 -03:00
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
Reference in New Issue Copy Permalink