iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
882213990d
linux/drivers/pinctrl/pinctrl-oxnas.c

1294 lines
36 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 Based on 1 normalized pattern(s): this program is free software you can distribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 24 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.872212424@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-01 11:08:59 +03:00
// SPDX-License-Identifier: GPL-2.0-only
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
/*
* Oxford Semiconductor OXNAS SoC Family pinctrl driver
*
* Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
*
* Based on pinctrl-pic32.c
* Joshua Henderson, <joshua.henderson@microchip.com>
* Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
*/
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include "pinctrl-utils.h"
#define PINS_PER_BANK 32
#define GPIO_BANK_START(bank) ((bank) * PINS_PER_BANK)
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
/* OX810 Regmap Offsets */
#define PINMUX_810_PRIMARY_SEL0 0x0c
#define PINMUX_810_SECONDARY_SEL0 0x14
#define PINMUX_810_TERTIARY_SEL0 0x8c
#define PINMUX_810_PRIMARY_SEL1 0x10
#define PINMUX_810_SECONDARY_SEL1 0x18
#define PINMUX_810_TERTIARY_SEL1 0x90
#define PINMUX_810_PULLUP_CTRL0 0xac
#define PINMUX_810_PULLUP_CTRL1 0xb0
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
/* OX820 Regmap Offsets */
#define PINMUX_820_BANK_OFFSET 0x100000
#define PINMUX_820_SECONDARY_SEL 0x14
#define PINMUX_820_TERTIARY_SEL 0x8c
#define PINMUX_820_QUATERNARY_SEL 0x94
#define PINMUX_820_DEBUG_SEL 0x9c
#define PINMUX_820_ALTERNATIVE_SEL 0xa4
#define PINMUX_820_PULLUP_CTRL 0xac
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
/* GPIO Registers */
#define INPUT_VALUE 0x00
pinctrl: oxnas: Add GPIO get_direction Implement a get_direction callback for the OXNAS GPIO driver in order to have pin output polarity in debugfs and new userspace ABI. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-24 13:03:24 +03:00
#define OUTPUT_EN 0x04
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
#define IRQ_PENDING 0x0c
#define OUTPUT_SET 0x14
#define OUTPUT_CLEAR 0x18
#define OUTPUT_EN_SET 0x1c
#define OUTPUT_EN_CLEAR 0x20
#define RE_IRQ_ENABLE 0x28
#define FE_IRQ_ENABLE 0x2c
struct oxnas_function {
const char *name;
const char * const *groups;
unsigned int ngroups;
};
struct oxnas_pin_group {
const char *name;
unsigned int pin;
unsigned int bank;
struct oxnas_desc_function *functions;
};
struct oxnas_desc_function {
const char *name;
unsigned int fct;
};
struct oxnas_gpio_bank {
void __iomem *reg_base;
struct gpio_chip gpio_chip;
struct irq_chip irq_chip;
unsigned int id;
};
struct oxnas_pinctrl {
struct regmap *regmap;
struct device *dev;
struct pinctrl_dev *pctldev;
const struct oxnas_function *functions;
unsigned int nfunctions;
const struct oxnas_pin_group *groups;
unsigned int ngroups;
struct oxnas_gpio_bank *gpio_banks;
unsigned int nbanks;
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
struct oxnas_pinctrl_data {
struct pinctrl_desc *desc;
struct oxnas_pinctrl *pctl;
};
static const struct pinctrl_pin_desc oxnas_ox810se_pins[] = {
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
PINCTRL_PIN(2, "gpio2"),
PINCTRL_PIN(3, "gpio3"),
PINCTRL_PIN(4, "gpio4"),
PINCTRL_PIN(5, "gpio5"),
PINCTRL_PIN(6, "gpio6"),
PINCTRL_PIN(7, "gpio7"),
PINCTRL_PIN(8, "gpio8"),
PINCTRL_PIN(9, "gpio9"),
PINCTRL_PIN(10, "gpio10"),
PINCTRL_PIN(11, "gpio11"),
PINCTRL_PIN(12, "gpio12"),
PINCTRL_PIN(13, "gpio13"),
PINCTRL_PIN(14, "gpio14"),
PINCTRL_PIN(15, "gpio15"),
PINCTRL_PIN(16, "gpio16"),
PINCTRL_PIN(17, "gpio17"),
PINCTRL_PIN(18, "gpio18"),
PINCTRL_PIN(19, "gpio19"),
PINCTRL_PIN(20, "gpio20"),
PINCTRL_PIN(21, "gpio21"),
PINCTRL_PIN(22, "gpio22"),
PINCTRL_PIN(23, "gpio23"),
PINCTRL_PIN(24, "gpio24"),
PINCTRL_PIN(25, "gpio25"),
PINCTRL_PIN(26, "gpio26"),
PINCTRL_PIN(27, "gpio27"),
PINCTRL_PIN(28, "gpio28"),
PINCTRL_PIN(29, "gpio29"),
PINCTRL_PIN(30, "gpio30"),
PINCTRL_PIN(31, "gpio31"),
PINCTRL_PIN(32, "gpio32"),
PINCTRL_PIN(33, "gpio33"),
PINCTRL_PIN(34, "gpio34"),
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const struct pinctrl_pin_desc oxnas_ox820_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
PINCTRL_PIN(2, "gpio2"),
PINCTRL_PIN(3, "gpio3"),
PINCTRL_PIN(4, "gpio4"),
PINCTRL_PIN(5, "gpio5"),
PINCTRL_PIN(6, "gpio6"),
PINCTRL_PIN(7, "gpio7"),
PINCTRL_PIN(8, "gpio8"),
PINCTRL_PIN(9, "gpio9"),
PINCTRL_PIN(10, "gpio10"),
PINCTRL_PIN(11, "gpio11"),
PINCTRL_PIN(12, "gpio12"),
PINCTRL_PIN(13, "gpio13"),
PINCTRL_PIN(14, "gpio14"),
PINCTRL_PIN(15, "gpio15"),
PINCTRL_PIN(16, "gpio16"),
PINCTRL_PIN(17, "gpio17"),
PINCTRL_PIN(18, "gpio18"),
PINCTRL_PIN(19, "gpio19"),
PINCTRL_PIN(20, "gpio20"),
PINCTRL_PIN(21, "gpio21"),
PINCTRL_PIN(22, "gpio22"),
PINCTRL_PIN(23, "gpio23"),
PINCTRL_PIN(24, "gpio24"),
PINCTRL_PIN(25, "gpio25"),
PINCTRL_PIN(26, "gpio26"),
PINCTRL_PIN(27, "gpio27"),
PINCTRL_PIN(28, "gpio28"),
PINCTRL_PIN(29, "gpio29"),
PINCTRL_PIN(30, "gpio30"),
PINCTRL_PIN(31, "gpio31"),
PINCTRL_PIN(32, "gpio32"),
PINCTRL_PIN(33, "gpio33"),
PINCTRL_PIN(34, "gpio34"),
PINCTRL_PIN(35, "gpio35"),
PINCTRL_PIN(36, "gpio36"),
PINCTRL_PIN(37, "gpio37"),
PINCTRL_PIN(38, "gpio38"),
PINCTRL_PIN(39, "gpio39"),
PINCTRL_PIN(40, "gpio40"),
PINCTRL_PIN(41, "gpio41"),
PINCTRL_PIN(42, "gpio42"),
PINCTRL_PIN(43, "gpio43"),
PINCTRL_PIN(44, "gpio44"),
PINCTRL_PIN(45, "gpio45"),
PINCTRL_PIN(46, "gpio46"),
PINCTRL_PIN(47, "gpio47"),
PINCTRL_PIN(48, "gpio48"),
PINCTRL_PIN(49, "gpio49"),
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const char * const oxnas_ox810se_fct0_group[] = {
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
"gpio0", "gpio1", "gpio2", "gpio3",
"gpio4", "gpio5", "gpio6", "gpio7",
"gpio8", "gpio9", "gpio10", "gpio11",
"gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio18", "gpio19",
"gpio20", "gpio21", "gpio22", "gpio23",
"gpio24", "gpio25", "gpio26", "gpio27",
"gpio28", "gpio29", "gpio30", "gpio31",
"gpio32", "gpio33", "gpio34"
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const char * const oxnas_ox810se_fct3_group[] = {
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
"gpio0", "gpio1", "gpio2", "gpio3",
"gpio4", "gpio5", "gpio6", "gpio7",
"gpio8", "gpio9",
"gpio20",
"gpio22", "gpio23", "gpio24", "gpio25",
"gpio26", "gpio27", "gpio28", "gpio29",
"gpio30", "gpio31", "gpio32", "gpio33",
"gpio34"
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const char * const oxnas_ox820_fct0_group[] = {
"gpio0", "gpio1", "gpio2", "gpio3",
"gpio4", "gpio5", "gpio6", "gpio7",
"gpio8", "gpio9", "gpio10", "gpio11",
"gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio18", "gpio19",
"gpio20", "gpio21", "gpio22", "gpio23",
"gpio24", "gpio25", "gpio26", "gpio27",
"gpio28", "gpio29", "gpio30", "gpio31",
"gpio32", "gpio33", "gpio34", "gpio35",
"gpio36", "gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42", "gpio43",
"gpio44", "gpio45", "gpio46", "gpio47",
"gpio48", "gpio49"
};
static const char * const oxnas_ox820_fct1_group[] = {
"gpio3", "gpio4",
"gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio18", "gpio19",
"gpio20", "gpio21", "gpio22", "gpio23",
"gpio24"
};
static const char * const oxnas_ox820_fct4_group[] = {
"gpio5", "gpio6", "gpio7", "gpio8",
"gpio24", "gpio25", "gpio26", "gpio27",
"gpio40", "gpio41", "gpio42", "gpio43"
};
static const char * const oxnas_ox820_fct5_group[] = {
"gpio28", "gpio29", "gpio30", "gpio31"
};
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
#define FUNCTION(_name, _gr) \
{ \
.name = #_name, \
.groups = oxnas_##_gr##_group, \
.ngroups = ARRAY_SIZE(oxnas_##_gr##_group), \
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const struct oxnas_function oxnas_ox810se_functions[] = {
FUNCTION(gpio, ox810se_fct0),
FUNCTION(fct3, ox810se_fct3),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const struct oxnas_function oxnas_ox820_functions[] = {
FUNCTION(gpio, ox820_fct0),
FUNCTION(fct1, ox820_fct1),
FUNCTION(fct4, ox820_fct4),
FUNCTION(fct5, ox820_fct5),
};
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
#define OXNAS_PINCTRL_GROUP(_pin, _name, ...) \
{ \
.name = #_name, \
.pin = _pin, \
.bank = _pin / PINS_PER_BANK, \
.functions = (struct oxnas_desc_function[]){ \
__VA_ARGS__, { } }, \
}
#define OXNAS_PINCTRL_FUNCTION(_name, _fct) \
{ \
.name = #_name, \
.fct = _fct, \
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const struct oxnas_pin_group oxnas_ox810se_groups[] = {
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
OXNAS_PINCTRL_GROUP(0, gpio0,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(1, gpio1,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(2, gpio2,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(3, gpio3,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(4, gpio4,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(5, gpio5,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(6, gpio6,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(7, gpio7,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(8, gpio8,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(9, gpio9,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(10, gpio10,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(11, gpio11,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(12, gpio12,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(13, gpio13,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(14, gpio14,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(15, gpio15,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(16, gpio16,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(17, gpio17,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(18, gpio18,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(19, gpio19,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(20, gpio20,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(21, gpio21,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(22, gpio22,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(23, gpio23,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(24, gpio24,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(25, gpio25,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(26, gpio26,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(27, gpio27,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(28, gpio28,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(29, gpio29,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(30, gpio30,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(31, gpio31,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(32, gpio32,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(33, gpio33,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
OXNAS_PINCTRL_GROUP(34, gpio34,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct3, 3)),
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const struct oxnas_pin_group oxnas_ox820_groups[] = {
OXNAS_PINCTRL_GROUP(0, gpio0,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(1, gpio1,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(2, gpio2,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(3, gpio3,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(4, gpio4,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(5, gpio5,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(6, gpio6,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(7, gpio7,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(8, gpio8,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(9, gpio9,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(10, gpio10,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(11, gpio11,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(12, gpio12,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(13, gpio13,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(14, gpio14,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(15, gpio15,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(16, gpio16,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(17, gpio17,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(18, gpio18,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(19, gpio19,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(20, gpio20,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(21, gpio21,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(22, gpio22,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(23, gpio23,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1)),
OXNAS_PINCTRL_GROUP(24, gpio24,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct1, 1),
OXNAS_PINCTRL_FUNCTION(fct4, 5)),
OXNAS_PINCTRL_GROUP(25, gpio25,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(26, gpio26,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(27, gpio27,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(28, gpio28,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct5, 5)),
OXNAS_PINCTRL_GROUP(29, gpio29,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct5, 5)),
OXNAS_PINCTRL_GROUP(30, gpio30,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct5, 5)),
OXNAS_PINCTRL_GROUP(31, gpio31,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct5, 5)),
OXNAS_PINCTRL_GROUP(32, gpio32,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(33, gpio33,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(34, gpio34,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(35, gpio35,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(36, gpio36,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(37, gpio37,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(38, gpio38,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(39, gpio39,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(40, gpio40,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(41, gpio41,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(42, gpio42,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(43, gpio43,
OXNAS_PINCTRL_FUNCTION(gpio, 0),
OXNAS_PINCTRL_FUNCTION(fct4, 4)),
OXNAS_PINCTRL_GROUP(44, gpio44,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(45, gpio45,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(46, gpio46,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(47, gpio47,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(48, gpio48,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
OXNAS_PINCTRL_GROUP(49, gpio49,
OXNAS_PINCTRL_FUNCTION(gpio, 0)),
};
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
static inline struct oxnas_gpio_bank *pctl_to_bank(struct oxnas_pinctrl *pctl,
unsigned int pin)
{
return &pctl->gpio_banks[pin / PINS_PER_BANK];
}
static int oxnas_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
return pctl->ngroups;
}
static const char *oxnas_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
return pctl->groups[group].name;
}
static int oxnas_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
unsigned int group,
const unsigned int **pins,
unsigned int *num_pins)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
*pins = &pctl->groups[group].pin;
*num_pins = 1;
return 0;
}
static const struct pinctrl_ops oxnas_pinctrl_ops = {
.get_groups_count = oxnas_pinctrl_get_groups_count,
.get_group_name = oxnas_pinctrl_get_group_name,
.get_group_pins = oxnas_pinctrl_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
pinctrl: oxnas: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map, introduced in d32f7fd3bbc3 ("pinctrl: Rename pinctrl_utils_dt_free_map to pinctrl_utils_free_map") but not reported into oxnas driver. Fixes: 611dac1e48a4 ("pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-31 12:36:15 +03:00
.dt_free_map = pinctrl_utils_free_map,
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
};
static int oxnas_pinmux_get_functions_count(struct pinctrl_dev *pctldev)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
return pctl->nfunctions;
}
static const char *
oxnas_pinmux_get_function_name(struct pinctrl_dev *pctldev, unsigned int func)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
return pctl->functions[func].name;
}
static int oxnas_pinmux_get_function_groups(struct pinctrl_dev *pctldev,
unsigned int func,
const char * const **groups,
unsigned int * const num_groups)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
*groups = pctl->functions[func].groups;
*num_groups = pctl->functions[func].ngroups;
return 0;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static int oxnas_ox810se_pinmux_enable(struct pinctrl_dev *pctldev,
unsigned int func, unsigned int group)
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
const struct oxnas_pin_group *pg = &pctl->groups[group];
const struct oxnas_function *pf = &pctl->functions[func];
const char *fname = pf->name;
struct oxnas_desc_function *functions = pg->functions;
u32 mask = BIT(pg->pin);
while (functions->name) {
if (!strcmp(functions->name, fname)) {
dev_dbg(pctl->dev,
"setting function %s bank %d pin %d fct %d mask %x\n",
fname, pg->bank, pg->pin,
functions->fct, mask);
regmap_write_bits(pctl->regmap,
(pg->bank ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_PRIMARY_SEL1 :
PINMUX_810_PRIMARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask,
(functions->fct == 1 ?
mask : 0));
regmap_write_bits(pctl->regmap,
(pg->bank ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_SECONDARY_SEL1 :
PINMUX_810_SECONDARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask,
(functions->fct == 2 ?
mask : 0));
regmap_write_bits(pctl->regmap,
(pg->bank ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_TERTIARY_SEL1 :
PINMUX_810_TERTIARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask,
(functions->fct == 3 ?
mask : 0));
return 0;
}
functions++;
}
dev_err(pctl->dev, "cannot mux pin %u to function %u\n", group, func);
return -EINVAL;
}
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static int oxnas_ox820_pinmux_enable(struct pinctrl_dev *pctldev,
unsigned int func, unsigned int group)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
const struct oxnas_pin_group *pg = &pctl->groups[group];
const struct oxnas_function *pf = &pctl->functions[func];
const char *fname = pf->name;
struct oxnas_desc_function *functions = pg->functions;
unsigned int offset = (pg->bank ? PINMUX_820_BANK_OFFSET : 0);
u32 mask = BIT(pg->pin);
while (functions->name) {
if (!strcmp(functions->name, fname)) {
dev_dbg(pctl->dev,
"setting function %s bank %d pin %d fct %d mask %x\n",
fname, pg->bank, pg->pin,
functions->fct, mask);
regmap_write_bits(pctl->regmap,
offset + PINMUX_820_SECONDARY_SEL,
mask,
(functions->fct == 1 ?
mask : 0));
regmap_write_bits(pctl->regmap,
offset + PINMUX_820_TERTIARY_SEL,
mask,
(functions->fct == 2 ?
mask : 0));
regmap_write_bits(pctl->regmap,
offset + PINMUX_820_QUATERNARY_SEL,
mask,
(functions->fct == 3 ?
mask : 0));
regmap_write_bits(pctl->regmap,
offset + PINMUX_820_DEBUG_SEL,
mask,
(functions->fct == 4 ?
mask : 0));
regmap_write_bits(pctl->regmap,
offset + PINMUX_820_ALTERNATIVE_SEL,
mask,
(functions->fct == 5 ?
mask : 0));
return 0;
}
functions++;
}
dev_err(pctl->dev, "cannot mux pin %u to function %u\n", group, func);
return -EINVAL;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static int oxnas_ox810se_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = gpiochip_get_data(range->gc);
u32 mask = BIT(offset - bank->gpio_chip.base);
dev_dbg(pctl->dev, "requesting gpio %d in bank %d (id %d) with mask 0x%x\n",
offset, bank->gpio_chip.base, bank->id, mask);
regmap_write_bits(pctl->regmap,
(bank->id ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_PRIMARY_SEL1 :
PINMUX_810_PRIMARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask, 0);
regmap_write_bits(pctl->regmap,
(bank->id ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_SECONDARY_SEL1 :
PINMUX_810_SECONDARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask, 0);
regmap_write_bits(pctl->regmap,
(bank->id ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_TERTIARY_SEL1 :
PINMUX_810_TERTIARY_SEL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask, 0);
return 0;
}
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static int oxnas_ox820_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = gpiochip_get_data(range->gc);
unsigned int bank_offset = (bank->id ? PINMUX_820_BANK_OFFSET : 0);
u32 mask = BIT(offset - bank->gpio_chip.base);
dev_dbg(pctl->dev, "requesting gpio %d in bank %d (id %d) with mask 0x%x\n",
offset, bank->gpio_chip.base, bank->id, mask);
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_SECONDARY_SEL,
mask, 0);
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_TERTIARY_SEL,
mask, 0);
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_QUATERNARY_SEL,
mask, 0);
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_DEBUG_SEL,
mask, 0);
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_ALTERNATIVE_SEL,
mask, 0);
return 0;
}
pinctrl: oxnas: Add GPIO get_direction Implement a get_direction callback for the OXNAS GPIO driver in order to have pin output polarity in debugfs and new userspace ABI. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-24 13:03:24 +03:00
static int oxnas_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(offset);
pinctrl: Use new GPIO_LINE_DIRECTION Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14 16:57:12 +03:00
if (readl_relaxed(bank->reg_base + OUTPUT_EN) & mask)
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
pinctrl: oxnas: Add GPIO get_direction Implement a get_direction callback for the OXNAS GPIO driver in order to have pin output polarity in debugfs and new userspace ABI. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-24 13:03:24 +03:00
}
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
static int oxnas_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(offset);
writel_relaxed(mask, bank->reg_base + OUTPUT_EN_CLEAR);
return 0;
}
static int oxnas_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(offset);
return (readl_relaxed(bank->reg_base + INPUT_VALUE) & mask) != 0;
}
static void oxnas_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(offset);
if (value)
writel_relaxed(mask, bank->reg_base + OUTPUT_SET);
else
writel_relaxed(mask, bank->reg_base + OUTPUT_CLEAR);
}
static int oxnas_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(offset);
oxnas_gpio_set(chip, offset, value);
writel_relaxed(mask, bank->reg_base + OUTPUT_EN_SET);
return 0;
}
static int oxnas_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset, bool input)
{
struct gpio_chip *chip = range->gc;
if (input)
oxnas_gpio_direction_input(chip, offset);
else
oxnas_gpio_direction_output(chip, offset, 0);
return 0;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const struct pinmux_ops oxnas_ox810se_pinmux_ops = {
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
.get_functions_count = oxnas_pinmux_get_functions_count,
.get_function_name = oxnas_pinmux_get_function_name,
.get_function_groups = oxnas_pinmux_get_function_groups,
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
.set_mux = oxnas_ox810se_pinmux_enable,
.gpio_request_enable = oxnas_ox810se_gpio_request_enable,
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
.gpio_set_direction = oxnas_gpio_set_direction,
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const struct pinmux_ops oxnas_ox820_pinmux_ops = {
.get_functions_count = oxnas_pinmux_get_functions_count,
.get_function_name = oxnas_pinmux_get_function_name,
.get_function_groups = oxnas_pinmux_get_function_groups,
.set_mux = oxnas_ox820_pinmux_enable,
.gpio_request_enable = oxnas_ox820_gpio_request_enable,
.gpio_set_direction = oxnas_gpio_set_direction,
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static int oxnas_ox810se_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = pctl_to_bank(pctl, pin);
unsigned int param = pinconf_to_config_param(*config);
u32 mask = BIT(pin - bank->gpio_chip.base);
int ret;
u32 arg;
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
ret = regmap_read(pctl->regmap,
(bank->id ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_PULLUP_CTRL1 :
PINMUX_810_PULLUP_CTRL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
&arg);
if (ret)
return ret;
arg = !!(arg & mask);
break;
default:
return -ENOTSUPP;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static int oxnas_ox820_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = pctl_to_bank(pctl, pin);
unsigned int param = pinconf_to_config_param(*config);
unsigned int bank_offset = (bank->id ? PINMUX_820_BANK_OFFSET : 0);
u32 mask = BIT(pin - bank->gpio_chip.base);
int ret;
u32 arg;
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
ret = regmap_read(pctl->regmap,
bank_offset + PINMUX_820_PULLUP_CTRL,
&arg);
if (ret)
return ret;
arg = !!(arg & mask);
break;
default:
return -ENOTSUPP;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static int oxnas_ox810se_pinconf_set(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *configs,
unsigned int num_configs)
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = pctl_to_bank(pctl, pin);
unsigned int param;
unsigned int i;
u32 offset = pin - bank->gpio_chip.base;
u32 mask = BIT(offset);
dev_dbg(pctl->dev, "setting pin %d bank %d mask 0x%x\n",
pin, bank->gpio_chip.base, mask);
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
dev_dbg(pctl->dev, " pullup\n");
regmap_write_bits(pctl->regmap,
(bank->id ?
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
PINMUX_810_PULLUP_CTRL1 :
PINMUX_810_PULLUP_CTRL0),
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
mask, mask);
break;
default:
dev_err(pctl->dev, "Property %u not supported\n",
param);
return -ENOTSUPP;
}
}
return 0;
}
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static int oxnas_ox820_pinconf_set(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *configs,
unsigned int num_configs)
{
struct oxnas_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
struct oxnas_gpio_bank *bank = pctl_to_bank(pctl, pin);
unsigned int bank_offset = (bank->id ? PINMUX_820_BANK_OFFSET : 0);
unsigned int param;
unsigned int i;
u32 offset = pin - bank->gpio_chip.base;
u32 mask = BIT(offset);
dev_dbg(pctl->dev, "setting pin %d bank %d mask 0x%x\n",
pin, bank->gpio_chip.base, mask);
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_PULL_UP:
dev_dbg(pctl->dev, " pullup\n");
regmap_write_bits(pctl->regmap,
bank_offset + PINMUX_820_PULLUP_CTRL,
mask, mask);
break;
default:
dev_err(pctl->dev, "Property %u not supported\n",
param);
return -ENOTSUPP;
}
}
return 0;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const struct pinconf_ops oxnas_ox810se_pinconf_ops = {
.pin_config_get = oxnas_ox810se_pinconf_get,
.pin_config_set = oxnas_ox810se_pinconf_set,
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
.is_generic = true,
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static const struct pinconf_ops oxnas_ox820_pinconf_ops = {
.pin_config_get = oxnas_ox820_pinconf_get,
.pin_config_set = oxnas_ox820_pinconf_set,
.is_generic = true,
};
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
static void oxnas_gpio_irq_ack(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
u32 mask = BIT(data->hwirq);
writel(mask, bank->reg_base + IRQ_PENDING);
}
static void oxnas_gpio_irq_mask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
unsigned int type = irqd_get_trigger_type(data);
u32 mask = BIT(data->hwirq);
if (type & IRQ_TYPE_EDGE_RISING)
writel(readl(bank->reg_base + RE_IRQ_ENABLE) & ~mask,
bank->reg_base + RE_IRQ_ENABLE);
if (type & IRQ_TYPE_EDGE_FALLING)
writel(readl(bank->reg_base + FE_IRQ_ENABLE) & ~mask,
bank->reg_base + FE_IRQ_ENABLE);
}
static void oxnas_gpio_irq_unmask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct oxnas_gpio_bank *bank = gpiochip_get_data(chip);
unsigned int type = irqd_get_trigger_type(data);
u32 mask = BIT(data->hwirq);
if (type & IRQ_TYPE_EDGE_RISING)
writel(readl(bank->reg_base + RE_IRQ_ENABLE) | mask,
bank->reg_base + RE_IRQ_ENABLE);
if (type & IRQ_TYPE_EDGE_FALLING)
writel(readl(bank->reg_base + FE_IRQ_ENABLE) | mask,
bank->reg_base + FE_IRQ_ENABLE);
}
static unsigned int oxnas_gpio_irq_startup(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
oxnas_gpio_direction_input(chip, data->hwirq);
oxnas_gpio_irq_unmask(data);
return 0;
}
static int oxnas_gpio_irq_set_type(struct irq_data *data, unsigned int type)
{
if ((type & (IRQ_TYPE_EDGE_RISING|IRQ_TYPE_EDGE_FALLING)) == 0)
return -EINVAL;
irq_set_handler_locked(data, handle_edge_irq);
return 0;
}
static void oxnas_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct oxnas_gpio_bank *bank = gpiochip_get_data(gc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long stat;
unsigned int pin;
chained_irq_enter(chip, desc);
stat = readl(bank->reg_base + IRQ_PENDING);
for_each_set_bit(pin, &stat, BITS_PER_LONG)
gpio: Move irqdomain into struct gpio_irq_chip In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-07 21:15:47 +03:00
generic_handle_irq(irq_linear_revmap(gc->irq.domain, pin));
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
chained_irq_exit(chip, desc);
}
#define GPIO_BANK(_bank) \
{ \
.gpio_chip = { \
.label = "GPIO" #_bank, \
.request = gpiochip_generic_request, \
.free = gpiochip_generic_free, \
pinctrl: oxnas: Add GPIO get_direction Implement a get_direction callback for the OXNAS GPIO driver in order to have pin output polarity in debugfs and new userspace ABI. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-24 13:03:24 +03:00
.get_direction = oxnas_gpio_get_direction, \
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
.direction_input = oxnas_gpio_direction_input, \
.direction_output = oxnas_gpio_direction_output, \
.get = oxnas_gpio_get, \
.set = oxnas_gpio_set, \
.ngpio = PINS_PER_BANK, \
.base = GPIO_BANK_START(_bank), \
.owner = THIS_MODULE, \
.can_sleep = 0, \
}, \
.irq_chip = { \
.name = "GPIO" #_bank, \
.irq_startup = oxnas_gpio_irq_startup, \
.irq_ack = oxnas_gpio_irq_ack, \
.irq_mask = oxnas_gpio_irq_mask, \
.irq_unmask = oxnas_gpio_irq_unmask, \
.irq_set_type = oxnas_gpio_irq_set_type, \
}, \
}
static struct oxnas_gpio_bank oxnas_gpio_banks[] = {
GPIO_BANK(0),
GPIO_BANK(1),
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static struct oxnas_pinctrl ox810se_pinctrl = {
.functions = oxnas_ox810se_functions,
.nfunctions = ARRAY_SIZE(oxnas_ox810se_functions),
.groups = oxnas_ox810se_groups,
.ngroups = ARRAY_SIZE(oxnas_ox810se_groups),
.gpio_banks = oxnas_gpio_banks,
.nbanks = ARRAY_SIZE(oxnas_gpio_banks),
};
static struct pinctrl_desc oxnas_ox810se_pinctrl_desc = {
.name = "oxnas-pinctrl",
.pins = oxnas_ox810se_pins,
.npins = ARRAY_SIZE(oxnas_ox810se_pins),
.pctlops = &oxnas_pinctrl_ops,
.pmxops = &oxnas_ox810se_pinmux_ops,
.confops = &oxnas_ox810se_pinconf_ops,
.owner = THIS_MODULE,
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static struct oxnas_pinctrl ox820_pinctrl = {
.functions = oxnas_ox820_functions,
.nfunctions = ARRAY_SIZE(oxnas_ox820_functions),
.groups = oxnas_ox820_groups,
.ngroups = ARRAY_SIZE(oxnas_ox820_groups),
.gpio_banks = oxnas_gpio_banks,
.nbanks = ARRAY_SIZE(oxnas_gpio_banks),
};
static struct pinctrl_desc oxnas_ox820_pinctrl_desc = {
.name = "oxnas-pinctrl",
.pins = oxnas_ox820_pins,
.npins = ARRAY_SIZE(oxnas_ox820_pins),
.pctlops = &oxnas_pinctrl_ops,
.pmxops = &oxnas_ox820_pinmux_ops,
.confops = &oxnas_ox820_pinconf_ops,
.owner = THIS_MODULE,
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static struct oxnas_pinctrl_data oxnas_ox810se_pinctrl_data = {
.desc = &oxnas_ox810se_pinctrl_desc,
.pctl = &ox810se_pinctrl,
};
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
static struct oxnas_pinctrl_data oxnas_ox820_pinctrl_data = {
.desc = &oxnas_ox820_pinctrl_desc,
.pctl = &ox820_pinctrl,
};
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
static const struct of_device_id oxnas_pinctrl_of_match[] = {
{ .compatible = "oxsemi,ox810se-pinctrl",
.data = &oxnas_ox810se_pinctrl_data
},
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
{ .compatible = "oxsemi,ox820-pinctrl",
.data = &oxnas_ox820_pinctrl_data,
},
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
{ },
};
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
static int oxnas_pinctrl_probe(struct platform_device *pdev)
{
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
const struct of_device_id *id;
const struct oxnas_pinctrl_data *data;
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
struct oxnas_pinctrl *pctl;
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
id = of_match_node(oxnas_pinctrl_of_match, pdev->dev.of_node);
if (!id)
return -ENODEV;
data = id->data;
if (!data || !data->pctl || !data->desc)
return -EINVAL;
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
if (!pctl)
return -ENOMEM;
pctl->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, pctl);
pctl->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"oxsemi,sys-ctrl");
if (IS_ERR(pctl->regmap)) {
dev_err(&pdev->dev, "failed to get sys ctrl regmap\n");
return -ENODEV;
}
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
pctl->functions = data->pctl->functions;
pctl->nfunctions = data->pctl->nfunctions;
pctl->groups = data->pctl->groups;
pctl->ngroups = data->pctl->ngroups;
pctl->gpio_banks = data->pctl->gpio_banks;
pctl->nbanks = data->pctl->nbanks;
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
pinctrl: oxnas: Move OX810SE specific function and structure as separate Add refactoring to move ox810se specific functions into specific ops structures an add support for the dt match data to get soc specific structures. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:46 +03:00
pctl->pctldev = pinctrl_register(data->desc, &pdev->dev, pctl);
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
if (IS_ERR(pctl->pctldev)) {
dev_err(&pdev->dev, "Failed to register pinctrl device\n");
return PTR_ERR(pctl->pctldev);
}
return 0;
}
static int oxnas_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct of_phandle_args pinspec;
struct oxnas_gpio_bank *bank;
unsigned int id, ngpios;
int irq, ret;
pinctrl: oxnas: Pass irqchip when adding gpiochip We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191002113819.4927-1-linus.walleij@linaro.org
2019-10-02 14:38:19 +03:00
struct gpio_irq_chip *girq;
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
if (of_parse_phandle_with_fixed_args(np, "gpio-ranges",
3, 0, &pinspec)) {
dev_err(&pdev->dev, "gpio-ranges property not found\n");
return -EINVAL;
}
id = pinspec.args[1] / PINS_PER_BANK;
ngpios = pinspec.args[2];
if (id >= ARRAY_SIZE(oxnas_gpio_banks)) {
dev_err(&pdev->dev, "invalid gpio-ranges base arg\n");
return -EINVAL;
}
if (ngpios > PINS_PER_BANK) {
dev_err(&pdev->dev, "invalid gpio-ranges count arg\n");
return -EINVAL;
}
bank = &oxnas_gpio_banks[id];
pinctrl: use devm_platform_ioremap_resource() to simplify code devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04 17:26:54 +03:00
bank->reg_base = devm_platform_ioremap_resource(pdev, 0);
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
if (IS_ERR(bank->reg_base))
return PTR_ERR(bank->reg_base);
irq = platform_get_irq(pdev, 0);
pinctrl: Remove dev_err() usage after platform_get_irq() We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-34-swboyd@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-30 21:15:33 +03:00
if (irq < 0)
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
return irq;
bank->id = id;
bank->gpio_chip.parent = &pdev->dev;
bank->gpio_chip.of_node = np;
bank->gpio_chip.ngpio = ngpios;
pinctrl: oxnas: Pass irqchip when adding gpiochip We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191002113819.4927-1-linus.walleij@linaro.org
2019-10-02 14:38:19 +03:00
girq = &bank->gpio_chip.irq;
girq->chip = &bank->irq_chip;
girq->parent_handler = oxnas_gpio_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(&pdev->dev, 1, sizeof(*girq->parents),
GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->parents[0] = irq;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_level_irq;
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
ret = gpiochip_add_data(&bank->gpio_chip, bank);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to add GPIO chip %u: %d\n",
id, ret);
return ret;
}
return 0;
}
static struct platform_driver oxnas_pinctrl_driver = {
.driver = {
.name = "oxnas-pinctrl",
.of_match_table = oxnas_pinctrl_of_match,
.suppress_bind_attrs = true,
},
.probe = oxnas_pinctrl_probe,
};
static const struct of_device_id oxnas_gpio_of_match[] = {
{ .compatible = "oxsemi,ox810se-gpio", },
pinctrl: oxnas: Add support for OX820 Add support for the Oxford Semiconductor OX820 which is similar as OX810 but has 50 pins and two registers banks to setup alternate functions. Add specific pins, groups and functions structures. Add DT match data to select corresponding support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-04 16:41:47 +03:00
{ .compatible = "oxsemi,ox820-gpio", },
pinctrl: Add Oxford Semiconductor OXNAS pinctrl and gpio driver Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 10:34:21 +03:00
{ },
};
static struct platform_driver oxnas_gpio_driver = {
.driver = {
.name = "oxnas-gpio",
.of_match_table = oxnas_gpio_of_match,
.suppress_bind_attrs = true,
},
.probe = oxnas_gpio_probe,
};
static int __init oxnas_gpio_register(void)
{
return platform_driver_register(&oxnas_gpio_driver);
}
arch_initcall(oxnas_gpio_register);
static int __init oxnas_pinctrl_register(void)
{
return platform_driver_register(&oxnas_pinctrl_driver);
}
arch_initcall(oxnas_pinctrl_register);
Reference in New Issue Copy Permalink