iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
891b58b35f
linux/drivers/nvmem/Kconfig

292 lines
8.7 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 15:07:45 +03:00
# SPDX-License-Identifier: GPL-2.0-only
nvmem: Add a simple NVMEM framework for nvmem providers This patch adds just providers part of the framework just to enable easy review. Up until now, NVMEM drivers like eeprom were stored in drivers/misc, where they all had to duplicate pretty much the same code to register a sysfs file, allow in-kernel users to access the content of the devices they were driving, etc. This was also a problem as far as other in-kernel users were involved, since the solutions used were pretty much different from on driver to another, there was a rather big abstraction leak. This introduction of this framework aims at solving this. It also introduces DT representation for consumer devices to go get the data they require (MAC Addresses, SoC/Revision ID, part numbers, and so on) from the nvmems. Having regmap interface to this framework would give much better abstraction for nvmems on different buses. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [Maxime Ripard: intial version of eeprom framework] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:13:19 +03:00
menuconfig NVMEM
nvmem: disallow modular CONFIG_NVMEM The new of_get_nvmem_mac_address() helper function causes a link error with CONFIG_NVMEM=m: drivers/of/of_net.o: In function `of_get_nvmem_mac_address': of_net.c:(.text+0x168): undefined reference to `of_nvmem_cell_get' of_net.c:(.text+0x19c): undefined reference to `nvmem_cell_read' of_net.c:(.text+0x1a8): undefined reference to `nvmem_cell_put' I could not come up with a good solution for this, as the code is always built-in. Using an #if IS_REACHABLE() check around it would solve the link time issue but then stop it from working in that configuration. Making of_nvmem_cell_get() an inline function could also solve that, but seems a bit ugly since it's somewhat larger than most inline functions, and it would just bring that problem into the callers. Splitting the function into a separate file might be an alternative. This uses the big hammer by making CONFIG_NVMEM itself a 'bool' symbol, which avoids the problem entirely but makes the vmlinux larger for anyone that might use NVMEM support but doesn't need it built-in otherwise. Fixes: 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper") Cc: Mike Looijmans <mike.looijmans@topic.nl> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mike Looijmans Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04 13:38:40 +03:00
bool "NVMEM Support"
nvmem: Add a simple NVMEM framework for nvmem providers This patch adds just providers part of the framework just to enable easy review. Up until now, NVMEM drivers like eeprom were stored in drivers/misc, where they all had to duplicate pretty much the same code to register a sysfs file, allow in-kernel users to access the content of the devices they were driving, etc. This was also a problem as far as other in-kernel users were involved, since the solutions used were pretty much different from on driver to another, there was a rather big abstraction leak. This introduction of this framework aims at solving this. It also introduces DT representation for consumer devices to go get the data they require (MAC Addresses, SoC/Revision ID, part numbers, and so on) from the nvmems. Having regmap interface to this framework would give much better abstraction for nvmems on different buses. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [Maxime Ripard: intial version of eeprom framework] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:13:19 +03:00
help
Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
This framework is designed to provide a generic interface to NVMEM
from both the Linux Kernel and the userspace.
If unsure, say no.
nvmem: qfprom: Add Qualcomm QFPROM support. This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:15:00 +03:00
if NVMEM
nvmem: core: add NVMEM_SYSFS Kconfig Many nvmem providers are not very keen on having default sysfs nvmem entry, as most of the usecases for them are inside kernel itself. And in some cases read/writes to some areas in nvmem are restricted and trapped at secure monitor level, so accessing them from userspace would result in board reboots. This patch adds new NVMEM_SYSFS Kconfig to make binary sysfs entry an optional one. This provision will give more flexibility to users. This patch also moves existing sysfs code to a new file so that its not compiled in when its not really required. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Gaurav Kohli <gkohli@codeaurora.org> Tested-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16 12:59:24 +03:00
config NVMEM_SYSFS
bool "/sys/bus/nvmem/devices/*/nvmem (sysfs interface)"
depends on SYSFS
default y
help
Say Y here to add a sysfs interface for NVMEM.
This interface is mostly used by userspace applications to
read/write directly into nvmem.
nvmem: Add driver for the i.MX IIM This adds a readonly nvmem driver for the i.MX IC Identification Module (IIM). The IIM is found on the older i.MX SoCs like the i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and the i.MX53. The IIM can control up to 8 fuse banks with 256 bit each. Not all of the banks are equipped on the different SoCs. The actual number of fuses differ from 512 on the i.MX27 and 1152 on the i.MX53. The fuses are one time writable, but writing is currently not supported in the driver. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-31 15:44:50 +03:00
config NVMEM_IMX_IIM
tristate "i.MX IC Identification Module support"
depends on ARCH_MXC || COMPILE_TEST
help
This is a driver for the IC Identification Module (IIM) available on
i.MX SoCs, providing access to 4 Kbits of programmable
eFuses.
This driver can also be built as a module. If so, the module
will be called nvmem-imx-iim.
nvmem: imx-ocotp: Add i.MX6 OCOTP driver This driver handles the i.MX On-Chip OTP Controller found in i.MX6Q/D, i.MX6S/DL, i.MX6SL, and i.MX6SX SoCs. Currently it just returns the values stored in the shadow registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:55:47 +03:00
config NVMEM_IMX_OCOTP
nvmem: imx-ocotp: broaden Kconfig dependency The i.MX OCOTP controller is used in numerous Freescale/NXP SoCs from the MXC family, so the strict dependency on the i.MX6 SoC is too narrow. Broaden it to cover all the MXC familiy members. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-13 13:32:48 +03:00
tristate "i.MX 6/7/8 On-Chip OTP Controller support"
depends on ARCH_MXC || COMPILE_TEST
nvmem: imx-ocotp: add COMPILE_TEST for proper test coverage This patch add COMPILE_TEST to imx-ocotp driver so that it can be compile tested on other platforms with zero day testing. Also adds HAS_IOMEM dependancy as the users of devm_ioremap_resource() which are compile-testable should depend on HAS_IOMEM. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-02 14:19:43 +03:00
depends on HAS_IOMEM
nvmem: imx-ocotp: Add i.MX6 OCOTP driver This driver handles the i.MX On-Chip OTP Controller found in i.MX6Q/D, i.MX6S/DL, i.MX6SL, and i.MX6SX SoCs. Currently it just returns the values stored in the shadow registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:55:47 +03:00
help
This is a driver for the On-Chip OTP Controller (OCOTP) available on
i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
eFuses.
This driver can also be built as a module. If so, the module
will be called nvmem-imx-ocotp.
nvmem: imx: add i.MX8 nvmem driver This patch adds i.MX8 nvmem ocotp driver to access fuse via RPC to i.MX8 system controller. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14 17:32:19 +03:00
config NVMEM_IMX_OCOTP_SCU
tristate "i.MX8 SCU On-Chip OTP Controller support"
depends on IMX_SCU
nvmem: imx: scu: fix dependency in Kconfig Fix below error by adding HAVE_ARM_SMCCC dependency in Kconfig ERROR: "__arm_smccc_smc" [drivers/nvmem/nvmem-imx-ocotp-scu.ko] undefined! Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20191029114240.14905-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29 14:42:38 +03:00
depends on HAVE_ARM_SMCCC
nvmem: imx: add i.MX8 nvmem driver This patch adds i.MX8 nvmem ocotp driver to access fuse via RPC to i.MX8 system controller. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14 17:32:19 +03:00
help
This is a driver for the SCU On-Chip OTP Controller (OCOTP)
available on i.MX8 SoCs.
nvmem: add driver for JZ4780 efuse This patch brings support for the JZ4780 efuse. Currently it only exposes a read only access to the entire 8K bits efuse memory and nvmem cells. To fetch for example the MAC address: dd if=/sys/devices/platform/134100d0.efuse/jz4780-efuse0/nvmem bs=1 skip=34 count=6 status=none | xxd Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200310132257.23358-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-10 16:22:55 +03:00
config JZ4780_EFUSE
tristate "JZ4780 EFUSE Memory Support"
depends on MACH_INGENIC || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
select REGMAP_MMIO
help
Say Y here to include support for JZ4780 efuse memory found on
all JZ4780 SoC based devices.
To compile this driver as a module, choose M here: the module
will be called nvmem_jz4780_efuse.
nvmem: NXP LPC18xx EEPROM memory NVMEM driver This commit adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). EEPROM will be kept in Power Down mode except during read/write calls. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-07 13:57:39 +03:00
config NVMEM_LPC18XX_EEPROM
tristate "NXP LPC18XX EEPROM Memory Support"
depends on ARCH_LPC18XX || COMPILE_TEST
nvmem: Fix build error of missing devm_ioremap_resource on UM The devres.o gets linked if HAS_IOMEM is present so on ARCH=um allyesconfig (COMPILE_TEST) failed on many files with: drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0x394618): undefined reference to `devm_ioremap_resource' The users of devm_ioremap_resource() which are compile-testable should depend on HAS_IOMEM. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-31 13:07:03 +03:00
depends on HAS_IOMEM
nvmem: NXP LPC18xx EEPROM memory NVMEM driver This commit adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). EEPROM will be kept in Power Down mode except during read/write calls. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-07 13:57:39 +03:00
help
Say Y here to include support for NXP LPC18xx EEPROM memory found in
NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
To compile this driver as a module, choose M here: the module
will be called nvmem_lpc18xx_eeprom.
nvmem: add NXP LPC18xx OTP driver Add simple read only driver for the internal OTP (One Time Programmable) memory found on all NXP LPC18xx and LPC43xx devices. The OTP memory is split into 4 banks each with 4 32-bits word. Some of the banks contain predefined data while others are for general purpose and user programmable via the OTP API in ROM. Note that writing to the OTP memory is not yet supported. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31 17:45:16 +03:00
config NVMEM_LPC18XX_OTP
tristate "NXP LPC18XX OTP Memory Support"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on HAS_IOMEM
help
Say Y here to include support for NXP LPC18xx OTP memory found on
all LPC18xx and LPC43xx devices.
To compile this driver as a module, choose M here: the module
will be called nvmem_lpc18xx_otp.
nvmem: add driver for ocotp in i.MX23 and i.MX28 This patch brings read-only support for the On-Chip OTP cells in the i.MX23 and i.MX28 processor. The driver implements the new NVMEM provider API. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:56:27 +03:00
config NVMEM_MXS_OCOTP
tristate "Freescale MXS On-Chip OTP Memory Support"
depends on ARCH_MXS || COMPILE_TEST
nvmem: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-22 14:23:44 +03:00
depends on HAS_IOMEM
nvmem: add driver for ocotp in i.MX23 and i.MX28 This patch brings read-only support for the On-Chip OTP cells in the i.MX23 and i.MX28 processor. The driver implements the new NVMEM provider API. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:56:27 +03:00
help
If you say Y here, you will get readonly access to the
One Time Programmable memory pages that are stored
on the Freescale i.MX23/i.MX28 processor.
This driver can also be built as a module. If so, the module
will be called nvmem-mxs-ocotp.
nvmem: mediatek: Add Mediatek EFUSE driver Add Mediatek EFUSE driver to access hardware data like thermal sensor calibration or HDMI impedance. Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-07 13:58:11 +03:00
config MTK_EFUSE
tristate "Mediatek SoCs EFUSE support"
depends on ARCH_MEDIATEK || COMPILE_TEST
nvmem: Fix build error of missing devm_ioremap_resource on UM The devres.o gets linked if HAS_IOMEM is present so on ARCH=um allyesconfig (COMPILE_TEST) failed on many files with: drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0x394618): undefined reference to `devm_ioremap_resource' The users of devm_ioremap_resource() which are compile-testable should depend on HAS_IOMEM. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-31 13:07:03 +03:00
depends on HAS_IOMEM
nvmem: mediatek: Add Mediatek EFUSE driver Add Mediatek EFUSE driver to access hardware data like thermal sensor calibration or HDMI impedance. Signed-off-by: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-07 13:58:11 +03:00
help
This is a driver to access hardware related data like sensor
calibration, HDMI impedance etc.
This driver can also be built as a module. If so, the module
will be called efuse-mtk.
nvmem: qfprom: Add Qualcomm QFPROM support. This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:15:00 +03:00
config QCOM_QFPROM
tristate "QCOM QFPROM Support"
depends on ARCH_QCOM || COMPILE_TEST
nvmem: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-22 14:23:44 +03:00
depends on HAS_IOMEM
nvmem: qfprom: Add Qualcomm QFPROM support. This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:15:00 +03:00
help
Say y here to enable QFPROM support. The QFPROM provides access
functions for QFPROM data to rest of the drivers via nvmem interface.
This driver can also be built as a module. If so, the module
will be called nvmem_qfprom.
nvmem: add QTI SDAM driver QTI SDAM driver allows PMIC peripherals to access the shared memory that is available on QTI PMICs. Use subsys_initcall as PMIC SDAM NV memory is accessed by multiple PMIC drivers (charger, fuel gauge) to store/restore data across reboots required during their initialization. Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200116161100.30637-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-16 19:11:00 +03:00
config NVMEM_SPMI_SDAM
tristate "SPMI SDAM Support"
depends on SPMI
help
This driver supports the Shared Direct Access Memory Module on
Qualcomm Technologies, Inc. PMICs. It provides the clients
an interface to read/write to the SDAM module's shared memory.
nvmem: Adding bindings for rockchip-efuse There are some SoC specified values store in eFuse, such as the cpu_leakage and cpu_version, this driver can expose these values to /sys base on nvmem. Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:56:44 +03:00
config ROCKCHIP_EFUSE
tristate "Rockchip eFuse Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
nvmem: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-22 14:23:44 +03:00
depends on HAS_IOMEM
nvmem: Adding bindings for rockchip-efuse There are some SoC specified values store in eFuse, such as the cpu_leakage and cpu_version, this driver can expose these values to /sys base on nvmem. Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:56:44 +03:00
help
This is a simple drive to dump specified values of Rockchip SoC
from eFuse, such as cpu-leakage.
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_efuse.
nvmem: add Rockchip OTP driver Newer Rockchip socs like the px30 use a different one-time-programmable memory controller for things like cpu-id and leakage information, so add the necessary driver for it. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> [ported from vendor 4.4, converted to clock-bulk API and cleanups] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20191029114240.14905-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29 14:42:40 +03:00
config ROCKCHIP_OTP
tristate "Rockchip OTP controller support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on HAS_IOMEM
help
This is a simple drive to dump specified values of Rockchip SoC
from otp, such as cpu-leakage.
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_otp.
nvmem: Add the Broadcom OTP controller driver Add support for 32 and 64-bit versions of Broadcom's On-Chip OTP controller. These controllers are used on SoC's such as Cygnus and Stingray. Reviewed-by: Ray Jui <ray.jui@broadcom.com> Tested-by: Jonathan Richardson <jonathan.richardson@broadcom.com> Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Oza Pawandeep <oza@broadcom.com> Signed-off-by: Jonathan Richardson <jonathan.richardson@broadcom.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-31 17:45:19 +03:00
config NVMEM_BCM_OCOTP
tristate "Broadcom On-Chip OTP Controller support"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM
default ARCH_BCM_IPROC
help
Say y here to enable read/write access to the Broadcom OTP
controller.
This driver can also be built as a module. If so, the module
will be called nvmem-bcm-ocotp.
nvmem: Add driver for STM32 factory-programmed read only mem Add a read only nvmem driver for STM32 factory-programmed memory area (on-chip non-volatile storage). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-13 13:32:55 +03:00
config NVMEM_STM32_ROMEM
tristate "STMicroelectronics STM32 factory-programmed memory support"
depends on ARCH_STM32 || COMPILE_TEST
help
Say y here to enable read-only access for STMicroelectronics STM32
factory-programmed memory area.
This driver can also be built as a module. If so, the module
will be called nvmem-stm32-romem.
nvmem: sunxi: Move the SID driver to the nvmem framework Now that we have the nvmem framework, we can consolidate the common driver code. Move the driver to the framework, and hopefully, it will fix the sysfs file creation race. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [srinivas.kandagatla: Moved to regmap based EEPROM framework] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:17:09 +03:00
config NVMEM_SUNXI_SID
tristate "Allwinner SoCs SID support"
depends on ARCH_SUNXI
help
This is a driver for the 'security ID' available on various Allwinner
devices.
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
nvmem: uniphier: add UniPhier eFuse driver Add eFuse driver for Socionext UniPhier series SoC. Note that eFuse device is under soc-glue and this register implements as read only. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24 12:54:26 +03:00
config UNIPHIER_EFUSE
tristate "UniPhier SoCs eFuse support"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on HAS_IOMEM
help
This is a simple driver to dump specified values of UniPhier SoC
from eFuse.
This driver can also be built as a module. If so, the module
will be called nvmem-uniphier-efuse.
nvmem: Add Vybrid OCOTP support The patch adds support for the On Chip One Time Programmable Peripheral (OCOTP) on the Vybrid platform. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:54:59 +03:00
config NVMEM_VF610_OCOTP
tristate "VF610 SoC OCOTP support"
depends on SOC_VF610 || COMPILE_TEST
nvmem: Fix dependencies for !HAS_IOMEM archs Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-22 14:23:44 +03:00
depends on HAS_IOMEM
nvmem: Add Vybrid OCOTP support The patch adds support for the On Chip One Time Programmable Peripheral (OCOTP) on the Vybrid platform. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30 15:54:59 +03:00
help
This is a driver for the 'OCOTP' peripheral available on Vybrid
devices like VF5xx and VF6xx.
This driver can also be build as a module. If so, the module will
be called nvmem-vf610-ocotp.
nvmem: amlogic: Add Amlogic Meson EFUSE driver Add Amlogic EFUSE driver to access hardware data like ethernet address, serial number or IDs. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-27 16:43:46 +03:00
config MESON_EFUSE
nvmem: meson-efuse: indicate that this driver is only for Meson GX SoCs The current Amlogic Meson eFuse driver only supports the 64-bit SoCs (GXBB and newer). Older SoCs cannot be supported by the same driver because they do not use the meson secure monitor firmware to access the hardware. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09 16:26:40 +03:00
tristate "Amlogic Meson GX eFuse Support"
nvmem: amlogic: Add Amlogic Meson EFUSE driver Add Amlogic EFUSE driver to access hardware data like ethernet address, serial number or IDs. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-27 16:43:46 +03:00
depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
help
This is a driver to retrieve specific values from the eFuse found on
nvmem: meson-efuse: indicate that this driver is only for Meson GX SoCs The current Amlogic Meson eFuse driver only supports the 64-bit SoCs (GXBB and newer). Older SoCs cannot be supported by the same driver because they do not use the meson secure monitor firmware to access the hardware. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09 16:26:40 +03:00
the Amlogic Meson GX SoCs.
nvmem: amlogic: Add Amlogic Meson EFUSE driver Add Amlogic EFUSE driver to access hardware data like ethernet address, serial number or IDs. Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-27 16:43:46 +03:00
This driver can also be built as a module. If so, the module
will be called nvmem_meson_efuse.
nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs This adds a driver to access the efuse on Amlogic Meson6, Meson8 and Meson8b SoCs. These SoCs are accessing the efuse IP block directly through the registers in the "secbus" region. This makes it different from the Meson GX efuse driver which uses the "secure monitor" firmware to access the efuse. The efuse on Meson6 can only read one byte at a time, while the efuse on Meson8 and Meson8b always reads 4 bytes at a time. The new driver supports both, but due to lack of hardware Meson6 support was not tested. The hardware also supports writing. However, this is currently not supported by the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09 16:26:41 +03:00
config MESON_MX_EFUSE
tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
depends on ARCH_MESON || COMPILE_TEST
help
This is a driver to retrieve specific values from the eFuse found on
the Amlogic Meson6, Meson8 and Meson8b SoCs.
This driver can also be built as a module. If so, the module
will be called nvmem_meson_mx_efuse.
nvmem: add snvs_lpgpr driver This is a driver for Low Power General Purpose Register (LPGPR) available on i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. It is a 32-bit read/write register located in the low power domain. Since LPGPR is located in the battery-backed power domain, LPGPR can be used by any application for retaining data during an SoC power-down mode. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-17 13:33:43 +03:00
config NVMEM_SNVS_LPGPR
tristate "Support for Low Power General Purpose Register"
nvmem: Broaden the selection of NVMEM_SNVS_LPGPR The SNVS LPGR IP block is also found on other i.MX SoCs that are not covered by the current SOC_IMX6 || SOC_IMX7D logic. One example is the i.MX7ULP. To avoid keep expanding the SoC logic selection, make it broader by using the more generic ARCH_MXC symbol instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14 17:32:20 +03:00
depends on ARCH_MXC || COMPILE_TEST
nvmem: add snvs_lpgpr driver This is a driver for Low Power General Purpose Register (LPGPR) available on i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. It is a 32-bit read/write register located in the low power domain. Since LPGPR is located in the battery-backed power domain, LPGPR can be used by any application for retaining data during an SoC power-down mode. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-17 13:33:43 +03:00
help
This is a driver for Low Power General Purpose Register (LPGPR) available on
nvmem: add i.MX7 support to snvs-lpgpr The i.MX7 family has similar SNVS hardware so make the snvs-lpgpr support it along with the i.MX6 family. The register interface is the same except for the number and offset of the general purpose registers. Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-09 17:47:16 +03:00
i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
nvmem: add snvs_lpgpr driver This is a driver for Low Power General Purpose Register (LPGPR) available on i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. It is a 32-bit read/write register located in the low power domain. Since LPGPR is located in the battery-backed power domain, LPGPR can be used by any application for retaining data during an SoC power-down mode. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-17 13:33:43 +03:00
This driver can also be built as a module. If so, the module
will be called nvmem-snvs-lpgpr.
nvmem: Add RAVE SP EEPROM driver Add driver providing access to EEPROMs connected to RAVE SP devices Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: linux-kernel@vger.kernel.org Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-11 14:06:58 +03:00
config RAVE_SP_EEPROM
tristate "Rave SP EEPROM Support"
depends on RAVE_SP_CORE
help
Say y here to enable Rave SP EEPROM support.
nvmem: Add Spreadtrum SC27XX efuse support This patch add the efuse driver which is embeded in Spreadtrum SC27XX series PMICs. The sc27xx efuse contains 32 blocks and each block's data width is 16 bits. Signed-off-by: Freeman Liu <freeman.liu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11 13:20:41 +03:00
config SC27XX_EFUSE
tristate "Spreadtrum SC27XX eFuse Support"
depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on HAS_IOMEM
help
This is a simple driver to dump specified values of Spreadtrum
SC27XX PMICs from eFuse.
This driver can also be built as a module. If so, the module
will be called nvmem-sc27xx-efuse.
nvmem: zynqmp: Added zynqmp nvmem firmware driver This patch adds zynqmp nvmem firmware driver to access the SoC revision information from the hardware register. Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-02-06 14:07:21 +03:00
config NVMEM_ZYNQMP
bool "Xilinx ZYNQMP SoC nvmem firmware support"
depends on ARCH_ZYNQMP
help
This is a driver to access hardware related data like
soc revision, IDCODE... etc by using the firmware
interface.
If sure, say yes. If unsure, say no.
nvmem: sprd: Add Spreadtrum SoCs eFuse support The Spreadtrum eFuse controller is widely used to dump chip ID, configuration setting, function select and so on, as well as supporting one-time programming. Signed-off-by: Freeman Liu <freeman.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20191029114240.14905-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29 14:42:37 +03:00
config SPRD_EFUSE
tristate "Spreadtrum SoC eFuse Support"
depends on ARCH_SPRD || COMPILE_TEST
depends on HAS_IOMEM
help
This is a simple driver to dump specified values of Spreadtrum
SoCs from eFuse.
This driver can also be built as a module. If so, the module
will be called nvmem-sprd-efuse.
nvmem: Add driver to expose reserved memory as nvmem Firmware/co-processors might use reserved memory areas in order to pass data stemming from an nvmem device otherwise non accessible to Linux. For example an EEPROM memory only physically accessible to firmware, or data only accessible early at boot time. In order to expose this data to other drivers and user-space, the driver models the reserved memory area as an nvmem device. Tested-by: Tim Gover <tim.gover@raspberrypi.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210129171430.11328-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29 20:14:29 +03:00
config NVMEM_RMEM
tristate "Reserved Memory Based Driver Support"
nvmem: rmem: fix undefined reference to memremap Fix below error reporte by kernel test robot rmem.c:(.text+0x14e): undefined reference to memremap s390x-linux-gnu-ld: rmem.c:(.text+0x1b6): undefined reference to memunmap Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210330111241.19401-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30 14:12:39 +03:00
depends on HAS_IOMEM
nvmem: Add driver to expose reserved memory as nvmem Firmware/co-processors might use reserved memory areas in order to pass data stemming from an nvmem device otherwise non accessible to Linux. For example an EEPROM memory only physically accessible to firmware, or data only accessible early at boot time. In order to expose this data to other drivers and user-space, the driver models the reserved memory area as an nvmem device. Tested-by: Tim Gover <tim.gover@raspberrypi.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210129171430.11328-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29 20:14:29 +03:00
help
nvmem: Kconfig: Correct typo in NVMEM_RMEM s/drivers/driver/ as the configuration selects a single driver. Suggested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210205100853.32372-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-05 13:08:52 +03:00
This driver maps reserved memory into an nvmem device. It might be
nvmem: Add driver to expose reserved memory as nvmem Firmware/co-processors might use reserved memory areas in order to pass data stemming from an nvmem device otherwise non accessible to Linux. For example an EEPROM memory only physically accessible to firmware, or data only accessible early at boot time. In order to expose this data to other drivers and user-space, the driver models the reserved memory area as an nvmem device. Tested-by: Tim Gover <tim.gover@raspberrypi.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210129171430.11328-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-29 20:14:29 +03:00
useful to expose information left by firmware in memory.
This driver can also be built as a module. If so, the module
will be called nvmem-rmem.
nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM This driver provides access to Broadcom's NVRAM. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210330111241.19401-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30 14:12:36 +03:00
config NVMEM_BRCM_NVRAM
tristate "Broadcom's NVRAM support"
depends on ARCH_BCM_5301X || COMPILE_TEST
depends on HAS_IOMEM
help
This driver provides support for Broadcom's NVRAM that can be accessed
using I/O mapping.
nvmem: qfprom: Add Qualcomm QFPROM support. This patch adds QFPROM support driver which is used by other drivers like thermal sensor and cpufreq. On MSM parts there are some efuses (called qfprom) these fuses store things like calibration data, speed bins.. etc. Drivers like cpufreq, thermal sensors would read out this data for configuring the driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 14:15:00 +03:00
endif
Reference in New Issue Copy Permalink