iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
8b0f578898
linux/drivers/acpi/cppc_acpi.c

825 lines
21 KiB
C
Raw Normal View History

ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
/*
* CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
*
* (C) Copyright 2014, 2015 Linaro Ltd.
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*
* CPPC describes a few methods for controlling CPU performance using
* information from a per CPU table called CPC. This table is described in
* the ACPI v5.0+ specification. The table consists of a list of
* registers which may be memory mapped or hardware registers and also may
* include some static integer values.
*
* CPU performance is on an abstract continuous scale as against a discretized
* P-state scale which is tied to CPU frequency only. In brief, the basic
* operation involves:
*
* - OS makes a CPU performance request. (Can provide min and max bounds)
*
* - Platform (such as BMC) is free to optimize request within requested bounds
* depending on power/thermal budgets etc.
*
* - Platform conveys its decision back to OS
*
* The communication between OS and platform occurs through another medium
* called (PCC) Platform Communication Channel. This is a generic mailbox like
* mechanism which includes doorbell semantics to indicate register updates.
* See drivers/mailbox/pcc.c for details on PCC.
*
* Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
* above specifications.
*/
#define pr_fmt(fmt) "ACPI CPPC: " fmt
#include <linux/cpufreq.h>
#include <linux/delay.h>
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
#include <linux/ktime.h>
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
#include <acpi/cppc_acpi.h>
/*
* Lock to provide mutually exclusive access to the PCC
* channel. e.g. When the remote updates the shared region
* with new data, the reader needs to be protected from
* other CPUs activity on the same channel.
*/
static DEFINE_SPINLOCK(pcc_lock);
/*
* The cpc_desc structure contains the ACPI register details
* as described in the per CPU _CPC tables. The details
* include the type of register (e.g. PCC, System IO, FFH etc.)
* and destination addresses which lets us READ/WRITE CPU performance
* information using the appropriate I/O methods.
*/
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* This layer handles all the PCC specifics for CPPC. */
static struct mbox_chan *pcc_channel;
static void __iomem *pcc_comm_addr;
static u64 comm_base_addr;
static int pcc_subspace_idx = -1;
static bool pcc_channel_acquired;
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
static ktime_t deadline;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
/* pcc mapped address + header size + offset within PCC subspace */
#define GET_PCC_VADDR(offs) (pcc_comm_addr + 0x8 + (offs))
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
/*
* Arbitrary Retries in case the remote processor is slow to respond
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
* to PCC commands. Keeping it high enough to cover emulators where
* the processors run painfully slow.
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
*/
#define NUM_RETRIES 500
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
static int check_pcc_chan(void)
{
int ret = -EIO;
struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_comm_addr;
ktime_t next_deadline = ktime_add(ktime_get(), deadline);
/* Retry in case the remote processor was too slow to catch up. */
while (!ktime_after(ktime_get(), next_deadline)) {
if (readw_relaxed(&generic_comm_base->status) & PCC_CMD_COMPLETE) {
ret = 0;
break;
}
/*
* Reducing the bus traffic in case this loop takes longer than
* a few retries.
*/
udelay(3);
}
return ret;
}
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
static int send_pcc_cmd(u16 cmd)
{
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
int ret = -EIO;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
struct acpi_pcct_shared_memory *generic_comm_base =
(struct acpi_pcct_shared_memory *) pcc_comm_addr;
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
/*
* For CMD_WRITE we know for a fact the caller should have checked
* the channel before writing to PCC space
*/
if (cmd == CMD_READ) {
ret = check_pcc_chan();
if (ret)
return ret;
}
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
/* Write to the shared comm region. */
writew(cmd, &generic_comm_base->command);
/* Flip CMD COMPLETE bit */
writew(0, &generic_comm_base->status);
/* Ring doorbell */
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
ret = mbox_send_message(pcc_channel, &cmd);
if (ret < 0) {
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n",
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
cmd, ret);
return ret;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
}
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
/*
* For READs we need to ensure the cmd completed to ensure
* the ensuing read()s can proceed. For WRITEs we dont care
* because the actual write()s are done before coming here
* and the next READ or WRITE will check if the channel
* is busy/free at the entry of this call.
*/
if (cmd == CMD_READ)
ret = check_pcc_chan();
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
mbox_client_txdone(pcc_channel, ret);
return ret;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
}
static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
{
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
if (ret < 0)
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
else
pr_debug("TX completed. CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
}
struct mbox_client cppc_mbox_cl = {
.tx_done = cppc_chan_tx_done,
.knows_txdone = true,
};
static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
{
int result = -EFAULT;
acpi_status status = AE_OK;
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
struct acpi_buffer state = {0, NULL};
union acpi_object *psd = NULL;
struct acpi_psd_package *pdomain;
status = acpi_evaluate_object_typed(handle, "_PSD", NULL, &buffer,
ACPI_TYPE_PACKAGE);
if (ACPI_FAILURE(status))
return -ENODEV;
psd = buffer.pointer;
if (!psd || psd->package.count != 1) {
pr_debug("Invalid _PSD data\n");
goto end;
}
pdomain = &(cpc_ptr->domain_info);
state.length = sizeof(struct acpi_psd_package);
state.pointer = pdomain;
status = acpi_extract_package(&(psd->package.elements[0]),
&format, &state);
if (ACPI_FAILURE(status)) {
pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
result = 0;
end:
kfree(buffer.pointer);
return result;
}
/**
* acpi_get_psd_map - Map the CPUs in a common freq domain.
* @all_cpu_data: Ptrs to CPU specific CPPC data including PSD info.
*
* Return: 0 for success or negative value for err.
*/
int acpi_get_psd_map(struct cpudata **all_cpu_data)
{
int count_target;
int retval = 0;
unsigned int i, j;
cpumask_var_t covered_cpus;
struct cpudata *pr, *match_pr;
struct acpi_psd_package *pdomain;
struct acpi_psd_package *match_pdomain;
struct cpc_desc *cpc_ptr, *match_cpc_ptr;
if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
/*
* Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
for_each_possible_cpu(i) {
pr = all_cpu_data[i];
if (!pr)
continue;
if (cpumask_test_cpu(i, covered_cpus))
continue;
cpc_ptr = per_cpu(cpc_desc_ptr, i);
if (!cpc_ptr)
continue;
pdomain = &(cpc_ptr->domain_info);
cpumask_set_cpu(i, pr->shared_cpu_map);
cpumask_set_cpu(i, covered_cpus);
if (pdomain->num_processors <= 1)
continue;
/* Validate the Domain info */
count_target = pdomain->num_processors;
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
pr->shared_type = CPUFREQ_SHARED_TYPE_HW;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
pr->shared_type = CPUFREQ_SHARED_TYPE_ANY;
for_each_possible_cpu(j) {
if (i == j)
continue;
match_cpc_ptr = per_cpu(cpc_desc_ptr, j);
if (!match_cpc_ptr)
continue;
match_pdomain = &(match_cpc_ptr->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
/* Here i and j are in the same domain */
if (match_pdomain->num_processors != count_target) {
retval = -EFAULT;
goto err_ret;
}
if (pdomain->coord_type != match_pdomain->coord_type) {
retval = -EFAULT;
goto err_ret;
}
cpumask_set_cpu(j, covered_cpus);
cpumask_set_cpu(j, pr->shared_cpu_map);
}
for_each_possible_cpu(j) {
if (i == j)
continue;
match_pr = all_cpu_data[j];
if (!match_pr)
continue;
match_cpc_ptr = per_cpu(cpc_desc_ptr, j);
if (!match_cpc_ptr)
continue;
match_pdomain = &(match_cpc_ptr->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
match_pr->shared_type = pr->shared_type;
cpumask_copy(match_pr->shared_cpu_map,
pr->shared_cpu_map);
}
}
err_ret:
for_each_possible_cpu(i) {
pr = all_cpu_data[i];
if (!pr)
continue;
/* Assume no coordination on any error parsing domain info */
if (retval) {
cpumask_clear(pr->shared_cpu_map);
cpumask_set_cpu(i, pr->shared_cpu_map);
pr->shared_type = CPUFREQ_SHARED_TYPE_ALL;
}
}
free_cpumask_var(covered_cpus);
return retval;
}
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
ACPI / CPPC: signedness bug in register_pcc_channel() The "pcc_subspace_idx" is -1 if it hasn't been initialized yet. We need it to be signed. Fixes: 337aadff8e45 (ACPI: Introduce CPU performance controls using CPPC) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-22 22:52:59 +03:00
static int register_pcc_channel(int pcc_subspace_idx)
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
{
ACPI / CPPC: Use h/w reduced version of the PCCT structure CPPC is enabled only on platforms which support the h/w reduced ACPI specification, so use the h/w reduced version of the PCCT consistently when deferencing PCCT contents. Fixes: 337aadff8e45 (ACPI: Introduce CPU performance controls using CPPC) Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-13 03:52:30 +03:00
struct acpi_pcct_hw_reduced *cppc_ss;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
unsigned int len;
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
u64 usecs_lat;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
if (pcc_subspace_idx >= 0) {
pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl,
pcc_subspace_idx);
if (IS_ERR(pcc_channel)) {
pr_err("Failed to find PCC communication channel\n");
return -ENODEV;
}
/*
* The PCC mailbox controller driver should
* have parsed the PCCT (global table of all
* PCC channels) and stored pointers to the
* subspace communication region in con_priv.
*/
cppc_ss = pcc_channel->con_priv;
if (!cppc_ss) {
pr_err("No PCC subspace found for CPPC\n");
return -ENODEV;
}
/*
* This is the shared communication region
* for the OS and Platform to communicate over.
*/
comm_base_addr = cppc_ss->base_address;
len = cppc_ss->length;
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
/*
* cppc_ss->latency is just a Nominal value. In reality
* the remote processor could be much slower to reply.
* So add an arbitrary amount of wait on top of Nominal.
*/
usecs_lat = NUM_RETRIES * cppc_ss->latency;
deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
pcc_comm_addr = acpi_os_ioremap(comm_base_addr, len);
if (!pcc_comm_addr) {
pr_err("Failed to ioremap PCC comm region mem\n");
return -ENOMEM;
}
/* Set flag so that we dont come here for each CPU. */
pcc_channel_acquired = true;
}
return 0;
}
/*
* An example CPC table looks like the following.
*
* Name(_CPC, Package()
* {
* 17,
* NumEntries
* 1,
* // Revision
* ResourceTemplate(){Register(PCC, 32, 0, 0x120, 2)},
* // Highest Performance
* ResourceTemplate(){Register(PCC, 32, 0, 0x124, 2)},
* // Nominal Performance
* ResourceTemplate(){Register(PCC, 32, 0, 0x128, 2)},
* // Lowest Nonlinear Performance
* ResourceTemplate(){Register(PCC, 32, 0, 0x12C, 2)},
* // Lowest Performance
* ResourceTemplate(){Register(PCC, 32, 0, 0x130, 2)},
* // Guaranteed Performance Register
* ResourceTemplate(){Register(PCC, 32, 0, 0x110, 2)},
* // Desired Performance Register
* ResourceTemplate(){Register(SystemMemory, 0, 0, 0, 0)},
* ..
* ..
* ..
*
* }
* Each Register() encodes how to access that specific register.
* e.g. a sample PCC entry has the following encoding:
*
* Register (
* PCC,
* AddressSpaceKeyword
* 8,
* //RegisterBitWidth
* 8,
* //RegisterBitOffset
* 0x30,
* //RegisterAddress
* 9
* //AccessSize (subspace ID)
* 0
* )
* }
*/
/**
* acpi_cppc_processor_probe - Search for per CPU _CPC objects.
* @pr: Ptr to acpi_processor containing this CPUs logical Id.
*
* Return: 0 for success or negative value for err.
*/
int acpi_cppc_processor_probe(struct acpi_processor *pr)
{
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj, *cpc_obj;
struct cpc_desc *cpc_ptr;
struct cpc_reg *gas_t;
acpi_handle handle = pr->handle;
unsigned int num_ent, i, cpc_rev;
acpi_status status;
int ret = -EFAULT;
/* Parse the ACPI _CPC table for this cpu. */
status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
ACPI_TYPE_PACKAGE);
if (ACPI_FAILURE(status)) {
ret = -ENODEV;
goto out_buf_free;
}
out_obj = (union acpi_object *) output.pointer;
cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL);
if (!cpc_ptr) {
ret = -ENOMEM;
goto out_buf_free;
}
/* First entry is NumEntries. */
cpc_obj = &out_obj->package.elements[0];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
num_ent = cpc_obj->integer.value;
} else {
pr_debug("Unexpected entry type(%d) for NumEntries\n",
cpc_obj->type);
goto out_free;
}
/* Only support CPPCv2. Bail otherwise. */
if (num_ent != CPPC_NUM_ENT) {
pr_debug("Firmware exports %d entries. Expected: %d\n",
num_ent, CPPC_NUM_ENT);
goto out_free;
}
/* Second entry should be revision. */
cpc_obj = &out_obj->package.elements[1];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_rev = cpc_obj->integer.value;
} else {
pr_debug("Unexpected entry type(%d) for Revision\n",
cpc_obj->type);
goto out_free;
}
if (cpc_rev != CPPC_REV) {
pr_debug("Firmware exports revision:%d. Expected:%d\n",
cpc_rev, CPPC_REV);
goto out_free;
}
/* Iterate through remaining entries in _CPC */
for (i = 2; i < num_ent; i++) {
cpc_obj = &out_obj->package.elements[i];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
} else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
gas_t = (struct cpc_reg *)
cpc_obj->buffer.pointer;
/*
* The PCC Subspace index is encoded inside
* the CPC table entries. The same PCC index
* will be used for all the PCC entries,
* so extract it only once.
*/
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
if (pcc_subspace_idx < 0)
pcc_subspace_idx = gas_t->access_width;
else if (pcc_subspace_idx != gas_t->access_width) {
pr_debug("Mismatched PCC ids.\n");
goto out_free;
}
} else if (gas_t->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
/* Support only PCC and SYS MEM type regs */
pr_debug("Unsupported register type: %d\n", gas_t->space_id);
goto out_free;
}
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
} else {
pr_debug("Err in entry:%d in CPC table of CPU:%d \n", i, pr->id);
goto out_free;
}
}
/* Store CPU Logical ID */
cpc_ptr->cpu_id = pr->id;
/* Plug it into this CPUs CPC descriptor. */
per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
/* Parse PSD data for this CPU */
ret = acpi_get_psd(cpc_ptr, handle);
if (ret)
goto out_free;
/* Register PCC channel once for all CPUs. */
if (!pcc_channel_acquired) {
ret = register_pcc_channel(pcc_subspace_idx);
if (ret)
goto out_free;
}
/* Everything looks okay */
pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
kfree(output.pointer);
return 0;
out_free:
kfree(cpc_ptr);
out_buf_free:
kfree(output.pointer);
return ret;
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
/**
* acpi_cppc_processor_exit - Cleanup CPC structs.
* @pr: Ptr to acpi_processor containing this CPUs logical Id.
*
* Return: Void
*/
void acpi_cppc_processor_exit(struct acpi_processor *pr)
{
struct cpc_desc *cpc_ptr;
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
kfree(cpc_ptr);
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
/*
* Since cpc_read and cpc_write are called while holding pcc_lock, it should be
* as fast as possible. We have already mapped the PCC subspace during init, so
* we can directly write to it.
*/
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
static int cpc_read(struct cpc_reg *reg, u64 *val)
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
{
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
int ret_val = 0;
*val = 0;
if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
void __iomem *vaddr = GET_PCC_VADDR(reg->address);
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
switch (reg->bit_width) {
case 8:
*val = readb(vaddr);
break;
case 16:
*val = readw(vaddr);
break;
case 32:
*val = readl(vaddr);
break;
case 64:
*val = readq(vaddr);
break;
default:
pr_debug("Error: Cannot read %u bit width from PCC\n",
reg->bit_width);
ret_val = -EFAULT;
}
} else
ret_val = acpi_os_read_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
return ret_val;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
}
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
static int cpc_write(struct cpc_reg *reg, u64 val)
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
{
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
int ret_val = 0;
if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
void __iomem *vaddr = GET_PCC_VADDR(reg->address);
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ACPI / CPPC: optimized cpc_read and cpc_write cpc_read and cpc_write are used while holding the pcc_lock spin_lock, so they need to be as fast as possible. acpi_os_read/write_memory APIs linearly search through a list for cached mapping which is quite expensive. Since the PCC subspace is already mapped into virtual address space during initialization, we can just add the offset and access the necessary CPPC registers. This patch + similar changes to PCC driver reduce the time per freq. transition from around 200us to about 20us for the CPPC cpufreq driver. Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Acked-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:21:00 +03:00
switch (reg->bit_width) {
case 8:
writeb(val, vaddr);
break;
case 16:
writew(val, vaddr);
break;
case 32:
writel(val, vaddr);
break;
case 64:
writeq(val, vaddr);
break;
default:
pr_debug("Error: Cannot write %u bit width to PCC\n",
reg->bit_width);
ret_val = -EFAULT;
break;
}
} else
ret_val = acpi_os_write_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
return ret_val;
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
}
/**
* cppc_get_perf_caps - Get a CPUs performance capabilities.
* @cpunum: CPU from which to get capabilities info.
* @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
*
* Return: 0 for success with perf_caps populated else -ERRNO.
*/
int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *highest_reg, *lowest_reg, *ref_perf,
*nom_perf;
u64 high, low, ref, nom;
int ret = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
ref_perf = &cpc_desc->cpc_regs[REFERENCE_PERF];
nom_perf = &cpc_desc->cpc_regs[NOMINAL_PERF];
spin_lock(&pcc_lock);
/* Are any of the regs PCC ?*/
if ((highest_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) ||
(lowest_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) ||
(ref_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) ||
(nom_perf->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) {
/* Ring doorbell once to update PCC subspace */
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
if (send_pcc_cmd(CMD_READ) < 0) {
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ret = -EIO;
goto out_err;
}
}
cpc_read(&highest_reg->cpc_entry.reg, &high);
perf_caps->highest_perf = high;
cpc_read(&lowest_reg->cpc_entry.reg, &low);
perf_caps->lowest_perf = low;
cpc_read(&ref_perf->cpc_entry.reg, &ref);
perf_caps->reference_perf = ref;
cpc_read(&nom_perf->cpc_entry.reg, &nom);
perf_caps->nominal_perf = nom;
if (!ref)
perf_caps->reference_perf = perf_caps->nominal_perf;
if (!high || !low || !nom)
ret = -EFAULT;
out_err:
spin_unlock(&pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
/**
* cppc_get_perf_ctrs - Read a CPUs performance feedback counters.
* @cpunum: CPU from which to read counters.
* @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
*
* Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
*/
int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *delivered_reg, *reference_reg;
u64 delivered, reference;
int ret = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
spin_lock(&pcc_lock);
/* Are any of the regs PCC ?*/
if ((delivered_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) ||
(reference_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM)) {
/* Ring doorbell once to update PCC subspace */
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
if (send_pcc_cmd(CMD_READ) < 0) {
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ret = -EIO;
goto out_err;
}
}
cpc_read(&delivered_reg->cpc_entry.reg, &delivered);
cpc_read(&reference_reg->cpc_entry.reg, &reference);
if (!delivered || !reference) {
ret = -EFAULT;
goto out_err;
}
perf_fb_ctrs->delivered = delivered;
perf_fb_ctrs->reference = reference;
perf_fb_ctrs->delivered -= perf_fb_ctrs->prev_delivered;
perf_fb_ctrs->reference -= perf_fb_ctrs->prev_reference;
perf_fb_ctrs->prev_delivered = delivered;
perf_fb_ctrs->prev_reference = reference;
out_err:
spin_unlock(&pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
/**
* cppc_set_perf - Set a CPUs performance controls.
* @cpu: CPU for which to set performance controls.
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
*
* Return: 0 for success, -ERRNO otherwise.
*/
int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cpc_register_resource *desired_reg;
int ret = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -ENODEV;
}
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
spin_lock(&pcc_lock);
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
/* If this is PCC reg, check if channel is free before writing */
if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
ret = check_pcc_chan();
if (ret)
goto busy_channel;
}
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
/*
* Skip writing MIN/MAX until Linux knows how to come up with
* useful values.
*/
cpc_write(&desired_reg->cpc_entry.reg, perf_ctrls->desired_perf);
/* Is this a PCC reg ?*/
if (desired_reg->cpc_entry.reg.space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
/* Ring doorbell so Remote can get our perf request. */
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
if (send_pcc_cmd(CMD_WRITE) < 0)
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
ret = -EIO;
}
ACPI / CPPC: Optimize PCC Read Write operations Previously the send_pcc_cmd() code checked if the PCC operation had completed before returning from the function. This check was performed regardless of the PCC op type (i.e. Read/Write). Knowing the type of cmd can be used to optimize the check and avoid needless waiting. e.g. with Write ops, the actual Writing is done before calling send_pcc_cmd(). And the subsequent Writes will check if the channel is free at the entry of send_pcc_cmd() anyway. However, for Read cmds, we need to wait for the cmd completion bit to be flipped, since the actual Read ops follow after returning from the send_pcc_cmd(). So, only do the looping check at the end for Read ops. Also, instead of using udelay() calls, use ktime as a means to check for deadlines. The current deadline in which the Remote should flip the cmd completion bit is defined as N * Nominal latency. Where N is arbitrary and large enough to work on slow emulators and Nominal latency comes from the ACPI table (PCCT). This helps in working around the CONFIG_HZ effects on udelay() and also avoids needing different ACPI tables for Silicon and Emulation platforms. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-17 23:20:59 +03:00
busy_channel:
ACPI: Introduce CPU performance controls using CPPC CPPC stands for Collaborative Processor Performance Controls and is defined in the ACPI v5.0+ spec. It describes CPU performance controls on an abstract and continuous scale allowing the platform (e.g. remote power processor) to flexibly optimize CPU performance with its knowledge of power budgets and other architecture specific knowledge. This patch adds a shim which exports commonly used functions to get and set CPPC specific controls for each CPU. This enables CPUFreq drivers to gather per CPU performance data and use with exisiting governors or even allows for customized governors which are implemented inside CPUFreq drivers. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> Reviewed-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-02 17:01:19 +03:00
spin_unlock(&pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_set_perf);
Reference in New Issue Copy Permalink