iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
8c8ee11345
linux/drivers/media/video/Makefile

201 lines
6.7 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# Makefile for the video capture/playback device drivers.
#
V4L/DVB (7125): tuner: build tuner-types independently of tuner-core tuner-types is needed for tuner-simple, and does not need to be bound to tuner-core. Any caller of tuner-simple, including tuner-core, needs to pass a structure from tuner-types into tuner-simple at attach-time. Export the two needed symbols from tuner-types for now, so that card-level drivers can attach tuner-simple for hybrid dvb_frontend devices. We will remove this dependency altogether as tuner refactoring phase 3 progresses. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-22 21:41:49 +04:00
tuner-objs := tuner-core.o
V4L/DVB (5563a): Add experimental support for tea5761 tuner This driver were made based on tea5761 specs. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-08 08:09:11 +04:00
V4L/DVB (3275): Split msp3400.c into msp3400-driver.c and msp3400-kthreads.c - Split msp3400.c into msp3400-driver.c and msp3400-kthreads.c. - Removed experimental DFPREG ioctls. If this is really needed one day then it should be implemented using VIDIOC_G/S_REGISTER. - Added missing BALANCE control info for VIDIOC_QUERYCTRL. - Still more cleanup, clarified some kernel messages. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09 20:32:39 +03:00
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-12 12:48:14 +03:00
stkwebcam-objs := stk-webcam.o stk-sensor.o
V4L/DVB (9815): omap2: add OMAP2 camera driver. Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia N800/N810 internet tablet. This driver uses the V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-01 21:40:09 +03:00
omap2cam-objs := omap24xxcam.o omap24xxcam-dma.o
V4L/DVB: V4L: Events: Add backend Add event handling backend to V4L2. The backend handles event subscription and delivery to file handles. Event subscriptions are based on file handle. Events may be delivered to all subscribed file handles on a device independent of where they originate from. Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-03-01 11:14:18 +03:00
videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \
[media] v4l: subdev: Add device node support Create a device node named subdevX for every registered subdev. As the device node is registered before the subdev core::s_config function is called, return -EGAIN on open until initialization completes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-09 14:38:49 +03:00
v4l2-event.o v4l2-ctrls.o v4l2-subdev.o
V4L/DVB (8427): videodev: split off the ioctl handling into v4l2-ioctl.c videodev.c became top-heavy so all the ioctl processing has been split off into v4l2-ioctl.c. This means videodev.c is back to its original purpose: creating and registering v4l devices. Since videodev.c and v4l2-ioctl.c should still remain one module (as least for now) I also had to rename videodev.c to v4l2-dev.c to prevent a circular dependency when building a videodev.ko module. This is not a bad thing, since the source and header now have the same name. And the v4l2- prefix is useful to see which sources are generic v4l2 support code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 15:43:17 +04:00
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
# V4L2 core modules
V4L/DVB (10137): v4l2-compat32: only build if needed Add CONFIG_COMPAT check in Makefile. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-23 21:02:16 +03:00
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-int-device.o
ifeq ($(CONFIG_COMPAT),y)
obj-$(CONFIG_VIDEO_DEV) += v4l2-compat-ioctl32.o
endif
V4L/DVB (7115): Fix bug #9833: regression when compiling V4L without I2C Adrian Bunk reported: > > Commit 8ffbc6559493c64d6194c92d856196fdaeb8a5fb causes the following > > compile error with CONFIG_VIDEO_DEV=y/m, CONFIG_I2C=n: > > > > <-- snip --> > > > > ... > > MODPOST 26 modules > > ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined! > > make[2]: *** [__modpost] Error 1 > > > > <-- snip --> ... And what should happen if CONFIG_VIDEO_DEV=y, CONFIG_I2C=m? CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-30 00:32:35 +03:00
obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
V4L/DVB (3927): Fix VIDEO_DEV=m, VIDEO_V4L1_COMPAT=y If CONFIG_VIDEO_DEV=m and CONFIG_VIDEO_V4L1_COMPAT=y, v4l1-compat should be built as a module (currently, it isn't built at all leading to problems with modules using it). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-23 22:56:20 +04:00
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
# All i2c modules must come first:
V4L/DVB (8726): link tuner before saa7134 If saa7134_init is run before v4l2_i2c_drv_init (tuner), then saa7134_board_init2 will try to set the tuner type for devices that don't exist yet. This moves tuner to before all of the device-specific drivers so that it's loaded early enough on boot. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-09-03 23:48:20 +04:00
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
V4L/DVB (4513): Split audio decoders from bttv Several audio decoders were just bound as if they were part of bttv driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-01 16:25:30 +04:00
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
[PATCH] V4L: 902: saa6588.c should build saa6588.ko rather than rds.ko Saa6588.c should build saa6588.ko, rather than rds.ko Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 08:38:41 +03:00
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o
obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
V4L/DVB (7535): saa717x: add new audio/video decoder i2c driver Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-09 13:26:17 +04:00
obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
V4L/DVB (13019): video: initial support for ADV7180 This is an initial driver for Analog Devices ADV7180 Video Decoder. So far it only supports query standard. [akpm@linux-foundation.org: remove unneeded cast] Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 04:17:20 +04:00
obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
V4L/DVB (11743): Analog Devices ADV7343 video encoder driver Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It has been tested for Composite and Component outputs. Updates as per review by Mauro Chehab, added support for more standards supported by the encoder. Also adding the missed out signed-offs.Tested only NTSC and PAL standards. [hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-07 16:30:01 +04:00
obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
obj-$(CONFIG_VIDEO_BT819) += bt819.o
obj-$(CONFIG_VIDEO_BT856) += bt856.o
obj-$(CONFIG_VIDEO_BT866) += bt866.o
V4L/DVB (4568): Added missing KS0197 Kconfig item Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-31 22:31:07 +04:00
obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
V4L/DVB (11742): TI THS7303 video amplifier driver code This patch adds driver for TI THS7303 video amplifier. This driver is implemented as a v4l2 sub device. Tested on TI DM646x EVM. This version has updates based on review comments by Mauro Chehab. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-07 16:29:25 +04:00
obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_VINO) += indycam.o
obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
V4L/DVB: Kbuild addition for TVP7002 driver This patch provides menu configuration options for the TVP7002 decoder driver in DM365. Includes only TVP7002. Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-18 20:07:57 +03:00
obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
obj-$(CONFIG_VIDEO_M52790) += m52790.o
obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
obj-$(CONFIG_VIDEO_CX25840) += cx25840/
obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
[media] mt9p031: Aptina (Micron) MT9P031 5MP sensor driver The MT9P031 is a parallel 12-bit 5MP sensor from Aptina (formerly Micron) controlled through I2C. The driver creates a V4L2 subdevice. It currently supports skipping, cropping, automatic binning, and gain, exposure, h/v flip and test pattern controls. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-20 15:21:16 +04:00
obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
[media] mt9t001: Aptina (Micron) MT9T001 3MP sensor driver The MT9T001 is a parallel 3MP sensor from Aptina (formerly Micron) controlled through I2C. The driver creates a V4L2 subdevice. It currently supports binning and cropping, and the gain, exposure, test pattern and black level controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-14 16:47:50 +04:00
obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
V4L/DVB (12135): Add a driver for mt9v011 sensor Adds driver for mt9v011 based on its datasheet, available at: http://download.micron.com/pdf/datasheets/imaging/MT9V011.pdf The driver was tested with a webcam that will be added on a next patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-29 12:41:26 +04:00
obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
[media] v4l: Add mt9v032 sensor driver The MT9V032 is a parallel wide VGA sensor from Aptina (formerly Micron) controlled through I2C. The driver creates a V4L2 subdevice. It currently supports binning and cropping, and the gain, auto gain, exposure, auto exposure and test pattern controls. Signed-off-by: Detlev Casanova <detlev.casanova@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-05 16:06:21 +04:00
obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
[media] Add driver for Siliconfile SR030PC30 VGA camera Add an I2C/v4l2-subdev driver for Siliconfile SR030PC30 VGA camera sensor with Image Signal Processor. SR030PC30 is the low resolution camera sensor on Samsung Aquila boards. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-11 20:33:57 +04:00
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
[media] Add v4l2 subdev driver for NOON010PC30L image sensor Add I2C/V4L2 subdev driver for Siliconfile NOON010PC30 CIF camera. The driver implements basic functionality, i.e. CIF/QCIF/QQCIF resolution and color format selection, automatic/manual color balance control. Other functions like cropping, rotation/flip, exposure etc. can be easily implemented if needed. Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-03 14:07:30 +03:00
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
[media] Add support for M-5MOLS 8 Mega Pixel camera ISP Add I2C/V4L2 subdev driver for M-5MOLS integrated image signal processor with 8 Mega Pixel sensor. Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20 09:27:28 +04:00
obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor This driver exposes preview mode operation of the S5K6AAFX sensor with embedded SoC ISP. The native capture (snapshot) operation mode is not supported. Following controls are available: manual/auto exposure and gain, power line frequency (anti-flicker), saturation, sharpness, brightness, contrast, white balance temperature, color effects, horizontal/vertical image flip, frame interval, auto white balance. RGB component gains are currently exposed through private controls. Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-04 21:05:58 +04:00
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
[media] adp1653: Add driver for LED flash controller This patch adds the driver for the adp1653 LED flash controller. This controller supports a high power led in flash and torch modes and an indicator light, sometimes also called privacy light. The adp1653 is used on the Nokia N900. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: David Cohen <dacohen@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-05 22:39:25 +04:00
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
[media] V4L: add an IMX074 sensor soc-camera / v4l2-subdev driver This patch adds an initial driver for the IMXъ74 image sensor from Sony. Lacking documentation, only very basic functionality in one specific image format has been implemented and tested. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-05 19:33:25 +04:00
obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o
obj-$(CONFIG_SOC_CAMERA_MT9M111) += mt9m111.o
obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o
V4L/DVB (13670): soc-camera: Add mt9t112 camera driver create mode 100644 drivers/media/video/mt9t112.c create mode 100644 include/media/mt9t112.h Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 17:53:55 +03:00
obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o
[media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-02 17:53:28 +03:00
obj-$(CONFIG_SOC_CAMERA_OV2640) += ov2640.o
[media] V4L: initial driver for ov5642 CMOS sensor This is an initial driver release for the Omnivision 5642 CMOS sensor. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-24 14:57:36 +04:00
obj-$(CONFIG_SOC_CAMERA_OV5642) += ov5642.o
[media] SoC Camera: add driver for OV6650 sensor This patch provides a V4L2 SoC Camera driver for OV6650 camera sensor, found on OMAP1 SoC based Amstrad Delta videophone. Since I have no experience with camera sensors, and the sensor documentation I was able to find was not very comprehensive, I left most settings at their default (reset) values, except for: - those required for proper mediabus parameters and picture geometry and format setup, - those used by controls. Resulting picture quality may be far from perfect, but better than nothing. In order to be able to get / set the sensor frame rate from userspace, I decided to provide two not yet SoC camera supported operations, g_parm and s_parm. These can be used after applying patch 4/6 from this series, "SoC Camera: add support for g_parm / s_parm operations". Created and tested against linux-2.6.36-rc5 on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-05 18:52:45 +04:00
obj-$(CONFIG_SOC_CAMERA_OV6650) += ov6650.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o
V4L/DVB (13040): V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV9640 sensor Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-23 11:59:24 +04:00
obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o
[media] V4L: Initial submit of OV9740 driver This soc_camera driver is for Omnivision's OV9740 sensor. This initial submission provides support for YUV422 output at 1280x720 (720p), which is the sensor's native resolution. 640x480 (VGA) is also supported, with cropping and scaling performed by the sensor's ISP. This driver is heavily based off of the existing OV9640 driver. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-18 01:14:33 +03:00
obj-$(CONFIG_SOC_CAMERA_OV9740) += ov9740.o
V4L/DVB (13130): soc-camera: add a new driver for the RJ54N1CB0C camera sensor from Sharp This adds an soc-camera / v4l2-subdev driver for the RJ54N1CB0C CMOS camera sensor from Sharp. The sensor is very picky about initialisation and configuration sequences. The driver limits artificially maximum window size by 800x600, although the sensor supports 1600x1200. Sizes above 800x600 don't seem to work correctly, besides, examples from the system integrator use sizes above 640x480 only for still photography. Unfortunately, I had to use "magic" register-value pairs for undocumented and "reserved" registers. This version of the driver also omits some functionality, like cropping, which hasn't been sufficiently tested yet and will be added later. create mode 100644 drivers/media/video/rj54n1cb0c.c Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-10-05 19:54:04 +04:00
obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o
# And now the v4l2 drivers:
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_ZORAN) += zoran/
obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
obj-$(CONFIG_VIDEO_W9966) += w9966.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_PMS) += pms.o
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_VINO) += vino.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_MEYE) += meye.o
V4L/DVB (5791): Fix Kbuild for kbd-ir-i2c Potentially, all board types with I2C and IR support can use an i2c based IR. Currently, the driver is selected only if bt848 or saa7134 boards are selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-25 22:42:01 +04:00
obj-$(CONFIG_VIDEO_SAA7134) += saa7134/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_CX88) += cx88/
[PATCH] v4l: 889: add em28xx to kernel build - Add em28xx to kernel build. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 08:38:30 +03:00
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
V4L/DVB: Add driver for Telegent tlg2300 pd-common.h contains the common data structures, while vendorcmds.h contains the vendor commands for firmware. [mchehab@redhat.com: Folded the 10 patches with the driver] Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-02 10:07:47 +03:00
obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
V4L/DVB (10954): Add cx231xx USB driver Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> [mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 20:37:50 +03:00
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
[media] move cx25821 out of staging This driver had the major issues already fixed. Move it out of staging. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-02 05:31:14 +04:00
obj-$(CONFIG_VIDEO_CX25821) += cx25821/
V4L/DVB (4922): Add usbvision driver This patch adds usbvision into V4L/DVB HG tree. Usbvision driver is a GPL driver, made by: Joerg Heckenbach <joerg@heckenbach-aw.de> and Dwaine Garden <DwaineGarden@rogers.com> V4L2 migration made by: Thierry Merle <thierry.merle@free.fr> Kconfig/Makefile scripts by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Joerg Heckenbach <joerg@heckenbach-aw.de> Signed-off-by: Dwaine Garden <dwainegarden@rogers.com> Signed-off-by: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-04 14:30:53 +03:00
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
V4L/DVB (4228a): pvrusb2 to kernel 2.6.18 Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner. The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded cx23416 hardware MPEG2 encoder. There are two major variants of this device; this driver handles both. Any V4L2 application which understands MPEG2 video stream data should be able to work with this device. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-27 03:58:46 +04:00
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
V4L/DVB (3376): Add cpia2 camera support There has been a CPIA2 driver out of kernel for a long time and it has been pretty clean for some time too. This is an import of the sourceforge driver which has been stripped of - 2.4 back compatibility - 2.4 old style MJPEG ioctls A couple of functions have been made static and the docs have been repackaged into Documentation/video4linux. The rvmalloc/free functions now match the cpia driver again. Other than that this is the code as is. Tested on x86-64 with a QX5 microscope. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-27 06:09:05 +03:00
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
[media] move tm6000 to drivers/media/video The serious bugs got fixed already. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 16:30:01 +04:00
obj-$(CONFIG_VIDEO_TM6000) += tm6000/
V4L/DVB (4516): Split audio/video encoders/decoders from main drivers Several audio/video encoders/decoders were just bound as if they were part of the core driver. In fact, they are generic enough to be used by other drivers as well, since they use I2C event bus to communicate. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-22 22:38:18 +04:00
obj-$(CONFIG_VIDEO_MXB) += mxb.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
[media] media: Add timberdale video-in driver This patch adds the timberdale video-in driver. The video IP of timberdale delivers the video data via DMA. The driver uses the DMA api to handle DMA transfers, and make use of the V4L2 video buffers to handle buffers against user space. If available the driver uses an encoder to get/set the video standard Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-08 16:45:44 +03:00
obj-$(CONFIG_VIDEO_TIMBERDALE) += timblogiw.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
V4L/DVB (6252): Adapt drivers to use the newer videobuf modules PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-08-23 23:37:49 +04:00
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
V4L/DVB (8341): videobuf: Add physically contiguous queue code V3 This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17 04:33:39 +04:00
obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
V4L/DVB (6254): Add videobuf-vmalloc Adds a newer videobuf-vmalloc module. This module uses the same videobuf controls, but implements memory allocation based on vmalloc methods. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-03 06:31:33 +04:00
obj-$(CONFIG_VIDEOBUF_VMALLOC) += videobuf-vmalloc.o
V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-24 01:12:08 +04:00
obj-$(CONFIG_VIDEOBUF_DVB) += videobuf-dvb.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o
[media] v4l: add videobuf2 Video for Linux 2 driver framework Videobuf2 is a Video for Linux 2 API-compatible driver framework for multimedia devices. It acts as an intermediate layer between userspace applications and device drivers. It also provides low-level, modular memory management functions for drivers. Videobuf2 eases driver development, reduces drivers' code size and aids in proper and consistent implementation of V4L2 API in drivers. Videobuf2 memory management backend is fully modular. This allows custom memory management routines for devices and platforms with non-standard memory management requirements to be plugged in, without changing the high-level buffer management functions and API. The framework provides: - implementations of streaming I/O V4L2 ioctls and file operations - high-level video buffer, video queue and state management functions - video buffer memory allocation and management Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-11 17:56:41 +04:00
obj-$(CONFIG_VIDEOBUF2_CORE) += videobuf2-core.o
[media] v4l: videobuf2: add generic memory handling routines Add generic memory handling routines for userspace pointer handling, contiguous memory verification and mapping. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-09 16:20:47 +03:00
obj-$(CONFIG_VIDEOBUF2_MEMOPS) += videobuf2-memops.o
[media] v4l: videobuf2: add vmalloc allocator Add an implementation of contiguous virtual memory allocator and handling routines for videobuf2, implemented on top of vmalloc()/vfree() calls. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-11 17:58:53 +04:00
obj-$(CONFIG_VIDEOBUF2_VMALLOC) += videobuf2-vmalloc.o
[media] v4l: videobuf2: add DMA coherent allocator Add an implementation of DMA coherent memory allocator and handling routines for videobuf2, implemented on top of dma_alloc_coherent() call. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-11 17:59:36 +04:00
obj-$(CONFIG_VIDEOBUF2_DMA_CONTIG) += videobuf2-dma-contig.o
[media] v4l: videobuf2: add DMA scatter/gather allocator Add an implementation of DMA scatter/gather allocator and handling routines for videobuf2. For mmap operation mode it is implemented on top of alloc_page + sg_set_page/_free_page. For userptr operation mode it is implemented on top of get_user_pages + sg_set_page/put_page. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-29 17:53:34 +03:00
obj-$(CONFIG_VIDEOBUF2_DMA_SG) += videobuf2-dma-sg.o
[media] v4l: add videobuf2 Video for Linux 2 driver framework Videobuf2 is a Video for Linux 2 API-compatible driver framework for multimedia devices. It acts as an intermediate layer between userspace applications and device drivers. It also provides low-level, modular memory management functions for drivers. Videobuf2 eases driver development, reduces drivers' code size and aids in proper and consistent implementation of V4L2 API in drivers. Videobuf2 memory management backend is fully modular. This allows custom memory management routines for devices and platforms with non-standard memory management requirements to be plugged in, without changing the high-level buffer management functions and API. The framework provides: - implementations of streaming I/O V4L2 ioctls and file operations - high-level video buffer, video queue and state management functions - video buffer memory allocation and management Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-11 17:56:41 +04:00
V4L/DVB: add memory-to-memory device helper framework for videobuf A mem-to-mem device is a device that uses memory buffers passed by userspace applications for both their source and destination data. This is different from existing drivers, which utilize memory buffers for either input or output, but not both. In terms of V4L2 such a device would be both of OUTPUT and CAPTURE type. Examples of such devices would be: image 'resizers', 'rotators', 'colorspace converters', etc. This patch adds a separate Kconfig sub-menu for mem-to-mem devices as well. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-23 12:38:37 +04:00
obj-$(CONFIG_V4L2_MEM2MEM_DEV) += v4l2-mem2mem.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
V4L/DVB (4191): Add CX2341X MPEG encoder module. Adds the cx2341x.c module that handles the programming of the Conexant cx23415/6 MPEG encoder chip used by cx88-blackbird, pvrusb2 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-18 21:40:30 +04:00
obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
[PATCH] v4l: (950) Added compiler options for cx25840 saa7115 and saa7127 Added compiler options for cx25840, saa7115 and saa7127 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 03:07:59 +03:00
[media] marvell-cam: Move cafe-ccic into its own directory This driver will soon become a family of drivers, so let's give it its own place to live. This move requires putting ov7670.h into include/media, but there are no code changes. Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-11 21:46:42 +04:00
obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
[media] marvell-cam: Basic working MMP camera driver Now we have a camera working over the marvell cam controller core. It works like the cafe driver and has all the same limitations, contiguous DMA only being one of them. But it's a start. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-11 21:46:49 +04:00
obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
V4L/DVB (5863): TCM825x: Add driver. Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-19 01:04:17 +04:00
[media] Add the via framebuffer camera controller driver Add a driver for the video capture port on VIA integrated chipsets. This version has a remaining OLPCism or two and expects to be talking to an ov7670; those can be improved as the need arises. This work was supported by the One Laptop Per Child project. Thanks to Laurent Pinchart for a number of useful comments. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-20 04:32:11 +04:00
obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
[media] omap3isp: Kconfig and Makefile Add the OMAP3 ISP driver to the kernel build system. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-02-13 00:05:06 +03:00
obj-$(CONFIG_VIDEO_OMAP3) += omap3isp/
V4L/DVB (5257): USB: add zr364xx V4L2 driver This patch adds a V4L2 driver giving support for USB webcams based on the zr364xx chipsets. Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27 19:30:59 +04:00
obj-$(CONFIG_USB_ZR364XX) += zr364xx.o
V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-12 12:48:14 +03:00
obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o
V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-25 15:05:39 +03:00
obj-$(CONFIG_USB_SN9C102) += sn9c102/
obj-$(CONFIG_USB_ET61X251) += et61x251/
obj-$(CONFIG_USB_PWC) += pwc/
V4L/DVB (8157): gspca: all subdrivers - remaning subdrivers added - remove the decoding helper and some specific frame decodings Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30 22:50:11 +04:00
obj-$(CONFIG_USB_GSPCA) += gspca/
V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-25 15:05:39 +03:00
V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture device The device encodes component video up to 1080i to a MPEG-TS stream with H.264 video and stereo AAC audio. Newer firmwares accept also AC3 (up to 5.1) audio over optical SPDIF without reencoding. Firmware upgrade is unimplemeted but rather unimportant since the firmware sits on a flash chip. The I2C adapter to drive the integrated infrared receiver/sender is currently disabled due to a conflict with cx18-based devices. Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19 00:10:04 +03:00
obj-$(CONFIG_VIDEO_HDPVR) += hdpvr/
V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices. It was primarily developed by Dean Anderson with only a little bit of guidance and cleanup by Greg. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [mchehab@infradead.org: fixed renamed callbacks] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-27 06:15:51 +04:00
obj-$(CONFIG_USB_S2255) += s2255drv.o
V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-25 15:05:39 +03:00
V4L/DVB (5922): ivtv, cx25840: postpone fw load until first use The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 19:52:40 +04:00
obj-$(CONFIG_VIDEO_IVTV) += ivtv/
V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from Conexant for their support. I am in particular thankful to Hauppauge since without their help this driver would not exist. It should also be noted that Steve did the work to get the DVB part up and running. Thank you! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: G. Andrew Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29 03:24:33 +04:00
obj-$(CONFIG_VIDEO_CX18) += cx18/
V4L/DVB (5922): ivtv, cx25840: postpone fw load until first use The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 19:52:40 +04:00
V4L/DVB: v4l: Add MPC5121e VIU video capture driver Adds support for Video-In (VIU) unit of Freescale MPC5121e. The driver supports RGB888/RGB565 formats, capture and overlay on MPC5121e DIU frame buffer. Signed-off-by: Hongjun Chen <hong-jun.chen@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-02 17:10:09 +04:00
obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
V4L/DVB (3775): Add VIVI Kconfig stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-09 22:51:18 +04:00
obj-$(CONFIG_VIDEO_VIVI) += vivi.o
V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device This is a virtual device driver for testing the memory-to-memory framework. This virtual device uses in-memory buffers for both its source and destination. It is capable of multi-instance, multi-buffer-per-transaction operation (via the mem2mem framework). [mchehab@redhat.com: use videobuf_queue_to_vaddr instead of the removed videobuf_queue_to_vmalloc] Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-23 12:38:38 +04:00
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver This is a new framework to support boards based on the CX23885/7 PCIe bridge. The framework supports digital (no analog yet) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-12 02:44:05 +03:00
obj-$(CONFIG_VIDEO_CX23885) += cx23885/
V4L/DVB (3775): Add VIVI Kconfig stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-09 22:51:18 +04:00
V4L/DVB: V4L: v4l2-subdev driver for AK8813 and AK8814 TV-encoders from AKM AK8814 only differs from AK8813 by included Macrovision Copy Protection function. This patch adds a driver for AK8813 and AK8814 I2C PAL/NTSC TV encoders. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-03-29 11:45:22 +04:00
obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
V4L/DVB (9815): omap2: add OMAP2 camera driver. Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia N800/N810 internet tablet. This driver uses the V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-01 21:40:09 +03:00
obj-$(CONFIG_VIDEO_OMAP2) += omap2cam.o
V4L/DVB (13658): v4l: add a media-bus API for configuring v4l2 subdev pixel and frame formats Video subdevices, like cameras, decoders, connect to video bridges over specialised busses. Data is being transferred over these busses in various formats, which only loosely correspond to fourcc codes, describing how video data is stored in RAM. This is not a one-to-one correspondence, therefore we cannot use fourcc codes to configure subdevice output data formats. This patch adds codes for several such on-the-bus formats and an API, similar to the familiar .s_fmt(), .g_fmt(), .try_fmt(), .enum_fmt() API for configuring those codes. After all users of the old API in struct v4l2_subdev_video_ops are converted, it will be removed. Also add helper routines to support generic pass-through mode for the soc-camera framework. create mode 100644 drivers/media/video/soc_mediabus.c create mode 100644 include/media/soc_mediabus.h create mode 100644 include/media/v4l2-mediabus.h Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-11 17:41:28 +03:00
obj-$(CONFIG_SOC_CAMERA) += soc_camera.o soc_mediabus.o
V4L/DVB (8343): soc_camera_platform: Add SoC Camera Platform driver This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-17 06:02:08 +04:00
obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
V4L/DVB (11611): soc-camera: link host drivers after clients With the transition of soc-camera to become a platform driver and to the v4l2-subdev framework the initialisation order becomes important. In case of a static build clients (i2c) drivers have to be available when host drivers are probed. Moving host drivers down in the Makefile achieves the desired order. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-24 19:57:42 +04:00
# soc-camera host drivers have to be linked after camera drivers
obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o
mx2_camera: Add soc_camera support for i.MX25/i.MX27 This is the soc_camera support developed by Sascha Hauer for the i.MX27. Alan Carvalho de Assis modified the original driver to get it working on more recent kernels. I modified it further to add support for i.MX25. This driver has been tested on i.MX25 and i.MX27 based platforms. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-04 08:55:10 +04:00
obj-$(CONFIG_VIDEO_MX2) += mx2_camera.o
V4L/DVB (11611): soc-camera: link host drivers after clients With the transition of soc-camera to become a platform driver and to the v4l2-subdev framework the initialisation order becomes important. In case of a static build clients (i2c) drivers have to be available when host drivers are probed. Moving host drivers down in the Makefile achieves the desired order. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-24 19:57:42 +04:00
obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to several video clients and send data to the CEU or to the Image Signal Processor. This patch implements a v4l2-subdevice driver for CSI-2 to be used within the soc-camera framework, implementing the second subdevice in addition to the actual video clients. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-26 18:12:43 +04:00
obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o
V4L/DVB (11611): soc-camera: link host drivers after clients With the transition of soc-camera to become a platform driver and to the v4l2-subdev framework the initialisation order becomes important. In case of a static build clients (i2c) drivers have to be available when host drivers are probed. Moving host drivers down in the Makefile achieves the desired order. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-24 19:57:42 +04:00
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
[media] SoC Camera: add driver for OMAP1 camera interface This is a V4L2 driver for TI OMAP1 SoC camera interface. Both videobuf-dma versions are supported, contig and sg, selectable with a module option. The former uses less processing power, but often fails to allocate contignuous buffer memory. The latter is free of this problem, but generates tens of DMA interrupts per frame. If contig memory allocation ever fails, the driver falls back to sg automatically on next open, but still can be switched back to contig manually. Both paths work stable for me, even under heavy load, on my OMAP1510 based Amstrad Delta videophone, that is the oldest, least powerfull OMAP1 implementation. The interface generally works in pass-through mode. Since input data byte endianess can be swapped, it provides up to two v4l2 pixel formats per each of several soc_mbus formats that have their swapped endian counterparts. Boards using this driver can provide it with the following platform data: - if and what freqency clock is expected by an on-board camera sensor, - what is the maximum pixel clock that should be accepted from the sensor, - what is the polarity of the sensor provided pixel clock, - if the interface GPIO line is connected to a sensor reset/powerdown input and what is the input polarity. Created and tested against linux-2.6.36-rc5 on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30 15:35:49 +04:00
obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o
[media] V4L: at91: add Atmel Image Sensor Interface (ISI) support This patch is to enable Atmel Image Sensor Interface (ISI) driver support. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-08 05:40:19 +04:00
obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
[media] v4l: Move s5p-fimc driver into Video capture devices s5p-fimc now also implements a camera capture video node so move it under the "Video capture devices" Kconfig menu. Also update the entry to reflect the driver's coverage of EXYNOS4 SoCs and separate the Makefile entry from the soc-camera drivers set. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-04 16:21:57 +04:00
V4L/DVB: v4l: Add driver for Samsung S5P SoC video postprocessor This driver exports a video device node per each camera interface/ video postprocessor (FIMC) device contained in Samsung S5P SoC series. The driver is based on v4l2-mem2mem framework. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-03 16:50:29 +04:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/
[media] MFC: Add MFC 5.1 V4L2 driver Multi Format Codec 5.1 is a hardware video coding acceleration module found in the S5PV210 and Exynos4 Samsung SoCs. It is capable of handling a range of video codecs and this driver provides a V4L2 interface for video decoding and encoding. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-21 17:51:26 +04:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/
[media] v4l: s5p-tv: add drivers for HDMI on Samsung S5P platform Add drivers for HDMI outputs on Samsung platforms from S5P family. Drivers are using: - v4l2 framework - runtime PM Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-02 19:16:37 +03:00
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/
V4L/DVB (7170): soc_camera V4L2 driver for directly-connected SoC-based cameras This driver provides an interface between platform-specific camera busses and camera devices. It should be used if the camera is connected not over a "proper" bus like PCI or USB, but over a special bus, like, for example, the Quick Capture interface on PXA270 SoCs. Later it should also be used for i.MX31 SoCs from Freescale. It can handle multiple cameras and / or multiple busses, which can be used, e.g., in stereo-vision applications. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-22 21:42:03 +04:00
V4L/DVB: V4L: SuperH Video Output Unit (VOU) driver A number of SuperH Mobile SoCs, including sh7724, include a Video Output Unit. This patch adds a video (V4L2) output driver for it. The driver uses v4l2-subdev and mediabus APIs to interface to TV encoders. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-03-17 17:21:13 +03:00
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o
V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USB Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-19 04:34:00 +04:00
obj-$(CONFIG_VIDEO_AU0828) += au0828/
V4L/DVB (8145a): USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30 22:04:50 +04:00
obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/
V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon This patch adds support for all of the known shipping Hauppauge HVR-2200 and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this time. Both tuners are supported. Volatiles and typedefs need rework, the rest is coding style compliant. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-10 04:17:28 +04:00
obj-$(CONFIG_VIDEO_SAA7164) += saa7164/
V4L/DVB (8145a): USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30 22:04:50 +04:00
V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers Since i2c autoprobing is no longer supported by v4l2 we need to make sure that the i2c modules are linked before the v4l2 modules. The v4l2 modules now rely on the presence of the i2c modules, so these must have initialized themselves before the v4l2 modules. The exception is the ir-kbd-i2c module, which is the only one still using autoprobing. This one should be loaded at the end of the v4l2 module. Loading it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no longer autoprobing, then it has to move up as well. This is only an issue when everything is compiled into the kernel. Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing this patch. Tested-by: Udo A. Steinberg <udo@hypervisor.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12 10:38:15 +04:00
obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
V4L/DVB: vpfe_capture: Create separate Kconfig file for davinci devices Currently VPFE Capture driver and DM6446 CCDC driver is being reused for AM3517. So this patch is preparing the Kconfig/makefile for re-use of such IP's. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-12 16:09:56 +04:00
obj-y += davinci/
V4L/DVB (12177): dm646x: Add an entry for dm646x EVM card at building system Makefile and Kconfig changes for DM646x Video Display device, using davinci/vpif, adv7343 and ths7303 drivers. Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-09 13:38:58 +04:00
V4L/DVB: V4L2: Add support for OMAP2/3 V4L2 display driver on top of DSS2 Features Supported - 1. Provides V4L2 user interface for the video pipelines of DSS 2. Basic streaming working on LCD, DVI and TV. 3. Works on latest DSS2 library from Tomi 4. Support for various pixel formats like YUV, UYVY, RGB32, RGB24, RGB565 5. Supports Alpha blending. 6. Supports Color keying both source and destination. 7. Supports rotation. 8. Supports cropping. 9. Supports Background color setting. 10. Allocated buffers to only needed size Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Murailidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-04-11 17:41:49 +04:00
obj-$(CONFIG_ARCH_OMAP) += omap/
[media] drivers/media: do not use EXTRA_CFLAGS Usage of these flags has been deprecated for nearly 4 years by: commit f77bf01425b11947eeb3b5b54685212c302741b8 Author: Sam Ravnborg <sam@neptun.(none)> Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-08-15 09:07:08 +04:00
ccflags-y += -Idrivers/media/dvb/dvb-core
ccflags-y += -Idrivers/media/dvb/frontends
ccflags-y += -Idrivers/media/common/tuners
Reference in New Issue Copy Permalink