License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
2005-04-17 02:20:36 +04:00
/* $Id: applicom.h,v 1.2 1999/08/28 15:09:49 dwmw2 Exp $ */
# ifndef __LINUX_APPLICOM_H__
# define __LINUX_APPLICOM_H__
# define DATA_TO_PC_READY 0x00
# define TIC_OWNER_TO_PC 0x01
# define NUMCARD_OWNER_TO_PC 0x02
# define TIC_DES_TO_PC 0x03
# define NUMCARD_DES_TO_PC 0x04
# define DATA_FROM_PC_READY 0x05
# define TIC_OWNER_FROM_PC 0x06
# define NUMCARD_OWNER_FROM_PC 0x07
# define TIC_DES_FROM_PC 0x08
# define NUMCARD_DES_FROM_PC 0x09
# define ACK_FROM_PC_READY 0x0E
# define TIC_ACK_FROM_PC 0x0F
# define NUMCARD_ACK_FROM_PC 0x010
# define TYP_ACK_FROM_PC 0x011
# define CONF_END_TEST 0x012
# define ERROR_CODE 0x016
# define PARAMETER_ERROR 0x018
# define VERS 0x01E
# define RAM_TO_PC 0x040
# define RAM_FROM_PC 0x0170
# define TYPE_CARD 0x03C0
# define SERIAL_NUMBER 0x03DA
# define RAM_IT_FROM_PC 0x03FE
# define RAM_IT_TO_PC 0x03FF
struct mailbox {
u16 stjb_codef ; /* offset 00 */
s16 stjb_status ; /* offset 02 */
u16 stjb_ticuser_root ; /* offset 04 */
u8 stjb_piduser [ 4 ] ; /* offset 06 */
u16 stjb_mode ; /* offset 0A */
u16 stjb_time ; /* offset 0C */
u16 stjb_stop ; /* offset 0E */
u16 stjb_nfonc ; /* offset 10 */
u16 stjb_ncard ; /* offset 12 */
u16 stjb_nchan ; /* offset 14 */
u16 stjb_nes ; /* offset 16 */
u16 stjb_nb ; /* offset 18 */
u16 stjb_typvar ; /* offset 1A */
u32 stjb_adr ; /* offset 1C */
u16 stjb_ticuser_dispcyc ; /* offset 20 */
u16 stjb_ticuser_protocol ; /* offset 22 */
u8 stjb_filler [ 12 ] ; /* offset 24 */
u8 stjb_data [ 256 ] ; /* offset 30 */
} ;
struct st_ram_io
{
unsigned char data_to_pc_ready ;
unsigned char tic_owner_to_pc ;
unsigned char numcard_owner_to_pc ;
unsigned char tic_des_to_pc ;
unsigned char numcard_des_to_pc ;
unsigned char data_from_pc_ready ;
unsigned char tic_owner_from_pc ;
unsigned char numcard_owner_from_pc ;
unsigned char tic_des_from_pc ;
unsigned char numcard_des_from_pc ;
unsigned char ack_to_pc_ready ;
unsigned char tic_ack_to_pc ;
unsigned char numcard_ack_to_pc ;
unsigned char typ_ack_to_pc ;
unsigned char ack_from_pc_ready ;
unsigned char tic_ack_from_pc ;
unsigned char numcard_ack_from_pc ;
unsigned char typ_ack_from_pc ;
unsigned char conf_end_test [ 4 ] ;
unsigned char error_code [ 2 ] ;
unsigned char parameter_error [ 4 ] ;
unsigned char time_base ;
unsigned char nul_inc ;
unsigned char vers ;
unsigned char num_card ;
unsigned char reserv1 [ 32 ] ;
} ;
# endif /* __LINUX_APPLICOM_H__ */
