2005-04-17 02:20:36 +04:00
/*
* Copyright ( c ) 1996 - 2002 Russell King .
*/
# include <linux/module.h>
# include <linux/slab.h>
# include <linux/blkdev.h>
# include <linux/errno.h>
# include <linux/ide.h>
# include <linux/init.h>
# include <asm/ecard.h>
2008-01-26 22:13:05 +03:00
static void rapide_setup_ports ( hw_regs_t * hw , void __iomem * base ,
void __iomem * ctrl , unsigned int sz , int irq )
2005-04-17 02:20:36 +04:00
{
unsigned long port = ( unsigned long ) base ;
2007-10-20 02:32:31 +04:00
int i ;
2005-04-17 02:20:36 +04:00
for ( i = IDE_DATA_OFFSET ; i < = IDE_STATUS_OFFSET ; i + + ) {
2008-01-26 22:13:05 +03:00
hw - > io_ports [ i ] = port ;
2005-04-17 02:20:36 +04:00
port + = sz ;
}
2008-01-26 22:13:05 +03:00
hw - > io_ports [ IDE_CONTROL_OFFSET ] = ( unsigned long ) ctrl ;
hw - > irq = irq ;
2005-04-17 02:20:36 +04:00
}
static int __devinit
rapide_probe ( struct expansion_card * ec , const struct ecard_id * id )
{
ide_hwif_t * hwif ;
void __iomem * base ;
int ret ;
2007-10-20 02:32:31 +04:00
u8 idx [ 4 ] = { 0xff , 0xff , 0xff , 0xff } ;
2008-01-26 22:13:05 +03:00
hw_regs_t hw ;
2005-04-17 02:20:36 +04:00
ret = ecard_request_resources ( ec ) ;
if ( ret )
goto out ;
2007-05-10 21:40:51 +04:00
base = ecardm_iomap ( ec , ECARD_RES_MEMC , 0 , 0 ) ;
2005-04-17 02:20:36 +04:00
if ( ! base ) {
ret = - ENOMEM ;
goto release ;
}
2008-01-26 22:13:05 +03:00
hwif = ide_find_port ( ( unsigned long ) base ) ;
2005-04-17 02:20:36 +04:00
if ( hwif ) {
2008-01-26 22:13:05 +03:00
memset ( & hw , 0 , sizeof ( hw ) ) ;
rapide_setup_ports ( & hw , base , base + 0x818 , 1 < < 6 , ec - > irq ) ;
hw . chipset = ide_generic ;
hw . dev = & ec - > dev ;
ide_init_port_hw ( hwif , & hw ) ;
hwif - > mmio = 1 ;
default_hwif_mmiops ( hwif ) ;
2007-10-20 02:32:31 +04:00
idx [ 0 ] = hwif - > index ;
2008-02-02 21:56:31 +03:00
ide_device_add ( idx , NULL ) ;
2007-10-20 02:32:31 +04:00
2005-04-17 02:20:36 +04:00
ecard_set_drvdata ( ec , hwif ) ;
goto out ;
}
release :
ecard_release_resources ( ec ) ;
out :
return ret ;
}
static void __devexit rapide_remove ( struct expansion_card * ec )
{
ide_hwif_t * hwif = ecard_get_drvdata ( ec ) ;
ecard_set_drvdata ( ec , NULL ) ;
ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls (take 3)
hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
and given the number of bugs we can assume that there are no real users:
* DMA has no chance of working because DMA resources are released by
ide_unregister() and they are never allocated again.
* Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
don't work for almost all hosts with "non-standard" (== non ISA-like)
layout of IDE taskfile registers (there is a lot of such host drivers).
* ide_port_init_devices() is not called when probing IDE devices so:
- drive->autotune is never set and IDE host/devices are not programmed
for the correct PIO/DMA transfer modes (=> possible data corruption)
- host specific I/O 32-bit and IRQ unmasking settings are not applied
(=> possible data corruption)
- host specific ->port_init_devs method is not called (=> no luck with
ht6560b, qd65xx and opti621 host drivers)
* ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).
* ->serialized flag is not preserved (=> possible data corruption when
using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
(HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).
* ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
gayle and macide host drivers).
* ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
isn't initialized again (SiI3112 support needs them).
* To issue an ioctl() there need to be at least one IDE device present
in the system.
* ->cable_detect method is not preserved + it is not called when probing
IDE devices so cable detection is broken (however since DMA support is
also broken it doesn't really matter ;-).
* Some objects which may have already been freed in ide_unregister()
are restored by ide_hwif_restore() (i.e. ->hwgroup).
* ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
slot cannot be found.
* When IDE host drivers are modular unregistered port may be re-used by
different host driver that owned it first causing subtle bugs.
Since we now have a proper warm-plug support remove these ioctls,
then remove no longer needed:
- ide_register_hw() and ide_hwif_restore() functions
- 'init_default' and 'restore' arguments of ide_unregister()
- zeroeing of hwif->{dma,extra}_* fields in ide_unregister()
As an added bonus IDE core code size shrinks by ~3kB (x86-32).
v2:
* fix ide_unregister() arguments in cleanup_module() (Andrew Morton).
v3:
* fix ide_unregister() arguments in palm_bk3710.c.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 02:46:24 +04:00
ide_unregister ( hwif - > index ) ;
2008-02-02 01:09:33 +03:00
2005-04-17 02:20:36 +04:00
ecard_release_resources ( ec ) ;
}
static struct ecard_id rapide_ids [ ] = {
{ MANU_YELLOWSTONE , PROD_YELLOWSTONE_RAPIDE32 } ,
{ 0xffff , 0xffff }
} ;
static struct ecard_driver rapide_driver = {
. probe = rapide_probe ,
. remove = __devexit_p ( rapide_remove ) ,
. id_table = rapide_ids ,
. drv = {
. name = " rapide " ,
} ,
} ;
static int __init rapide_init ( void )
{
return ecard_register_driver ( & rapide_driver ) ;
}
MODULE_LICENSE ( " GPL " ) ;
MODULE_DESCRIPTION ( " Yellowstone RAPIDE driver " ) ;
module_init ( rapide_init ) ;