iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
9517746131
linux/arch/m68k/platform/54xx/config.c

163 lines
3.8 KiB
C
Raw Normal View History

m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
/***************************************************************************/
/*
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
* linux/arch/m68knommu/platform/54xx/config.c
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
*
* Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
m68k: add ColdFire 54xx CPU MMU memory init code Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-14 09:06:22 +04:00
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <asm/pgalloc.h>
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
#include <asm/machdep.h>
#include <asm/coldfire.h>
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
#include <asm/m54xxsim.h>
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
#include <asm/mcfuart.h>
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
#include <asm/m54xxgpt.h>
m68k: add ColdFire 54xx CPU MMU memory init code Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-14 09:06:22 +04:00
#ifdef CONFIG_MMU
#include <asm/mmu_context.h>
#endif
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
/***************************************************************************/
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static struct mcf_platform_uart m54xx_uart_platform[] = {
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 64 + 35,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 64 + 34,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = 64 + 33,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE4,
.irq = 64 + 32,
},
};
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static struct platform_device m54xx_uart = {
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
.name = "mcfuart",
.id = 0,
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
.dev.platform_data = m54xx_uart_platform,
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
};
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static struct platform_device *m54xx_devices[] __initdata = {
&m54xx_uart,
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
};
/***************************************************************************/
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static void __init m54xx_uart_init_line(int line, int irq)
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
{
int rts_cts;
/* enable io pins */
switch (line) {
case 0:
rts_cts = 0; break;
case 1:
rts_cts = MCF_PAR_PSC_RTS_RTS; break;
case 2:
rts_cts = MCF_PAR_PSC_RTS_RTS | MCF_PAR_PSC_CTS_CTS; break;
case 3:
rts_cts = 0; break;
}
__raw_writeb(MCF_PAR_PSC_TXD | rts_cts | MCF_PAR_PSC_RXD,
MCF_MBAR + MCF_PAR_PSC(line));
}
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static void __init m54xx_uarts_init(void)
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
{
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
const int nrlines = ARRAY_SIZE(m54xx_uart_platform);
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
int line;
for (line = 0; (line < nrlines); line++)
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
m54xx_uart_init_line(line, m54xx_uart_platform[line].irq);
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
}
/***************************************************************************/
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
static void mcf54xx_reset(void)
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
{
/* disable interrupts and enable the watchdog */
asm("movew #0x2700, %sr\n");
__raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
__raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
__raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
MCF_MBAR + MCF_GPT_GMS0);
}
/***************************************************************************/
m68k: add ColdFire 54xx CPU MMU memory init code Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-14 09:06:22 +04:00
#ifdef CONFIG_MMU
unsigned long num_pages;
static void __init mcf54xx_bootmem_alloc(void)
{
unsigned long start_pfn;
unsigned long memstart;
/* _rambase and _ramend will be naturally page aligned */
m68k_memory[0].addr = _rambase;
m68k_memory[0].size = _ramend - _rambase;
/* compute total pages in system */
num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
/* page numbers */
memstart = PAGE_ALIGN(_ramstart);
min_low_pfn = _rambase >> PAGE_SHIFT;
start_pfn = memstart >> PAGE_SHIFT;
max_low_pfn = _ramend >> PAGE_SHIFT;
high_memory = (void *)_ramend;
m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
module_fixup(NULL, __start_fixup, __stop_fixup);
/* setup bootmem data */
m68k_setup_node(0);
memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
min_low_pfn, max_low_pfn);
free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
}
#endif /* CONFIG_MMU */
/***************************************************************************/
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
void __init config_BSP(char *commandp, int size)
{
m68k: add ColdFire 54xx CPU MMU memory init code Add code to the 54xx ColdFire CPU init to setup memory ready for the m68k paged memory start up. Some of the RAM variables that were specific to the non-mmu code paths now need to be used during this setup, so when CONFIG_MMU is enabled. Move these out of page_no.h and into page.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-10-14 09:06:22 +04:00
#ifdef CONFIG_MMU
mcf54xx_bootmem_alloc();
mmu_context_init();
#endif
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
mach_reset = mcf54xx_reset;
m54xx_uarts_init();
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
}
/***************************************************************************/
static int __init init_BSP(void)
{
m68knommu: make Coldfire 548x support more generic The ColdFire 547x family of processors is very similar to the ColdFire 548x series. Almost all of the support for them is the same. Make the code supporting the 548x more gneric, so it will be capable of supporting both families. For the most part this is a renaming excerise to make the support code more obviously apply to both families. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-11-02 05:05:29 +03:00
platform_add_devices(m54xx_devices, ARRAY_SIZE(m54xx_devices));
m68knommu: add basic mmu-less m548x support Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-09-20 15:11:11 +04:00
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
Reference in New Issue Copy Permalink