iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
linux/drivers/net/wireless/ath/ath10k/thermal.h

60 lines
1.8 KiB
C
Raw Normal View History

ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
/*
* Copyright (c) 2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _THERMAL_
#define _THERMAL_
#define ATH10K_QUIET_PERIOD_DEFAULT 100
#define ATH10K_QUIET_PERIOD_MIN 25
#define ATH10K_QUIET_START_OFFSET 10
ath10k: add thermal sensor device support Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:26 +02:00
#define ATH10K_HWMON_NAME_LEN 15
#define ATH10K_THERMAL_SYNC_TIMEOUT_HZ (5*HZ)
ath10k: fix interpretation of cooling device state Setting the sysfs attribute ends up configuring the duty cycle, but the interface through which the attribute is exposed (cooling_device) is for setting the throttle/cooling state. This is confusing the user. Hence renaming the cooling device interfaces for better readability. Cc: Matthias Kaehlcke <mka@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-15 20:36:21 +05:30
#define ATH10K_THERMAL_THROTTLE_MAX 100
ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
struct ath10k_thermal {
struct thermal_cooling_device *cdev;
ath10k: add thermal sensor device support Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:26 +02:00
struct completion wmi_sync;
ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
/* protected by conf_mutex */
ath10k: fix interpretation of cooling device state Setting the sysfs attribute ends up configuring the duty cycle, but the interface through which the attribute is exposed (cooling_device) is for setting the throttle/cooling state. This is confusing the user. Hence renaming the cooling device interfaces for better readability. Cc: Matthias Kaehlcke <mka@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-15 20:36:21 +05:30
u32 throttle_state;
ath10k: add debugfs entry to configure quiet period Add support to configure quiet period (in milliseconds) via debugfs. This is useful to experiment different quiet period values along with different throttle ratio. echo 100 > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-15 20:36:20 +05:30
u32 quiet_period;
ath10k: add thermal sensor device support Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:26 +02:00
/* temperature value in Celcius degree
* protected by data_lock
*/
int temperature;
ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
};
#ifdef CONFIG_THERMAL
int ath10k_thermal_register(struct ath10k *ar);
void ath10k_thermal_unregister(struct ath10k *ar);
ath10k: add thermal sensor device support Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:26 +02:00
void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature);
ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
#else
static inline int ath10k_thermal_register(struct ath10k *ar)
{
return 0;
}
static inline void ath10k_thermal_unregister(struct ath10k *ar)
{
}
ath10k: add thermal sensor device support Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:26 +02:00
static inline void ath10k_thermal_event_temperature(struct ath10k *ar,
int temperature)
{
}
ath10k: add thermal cooling device support Thermal cooling device support is added to control the temperature by throttling the data transmission for the given duration. Throttling is done using hw MAC quiet time setting. Period, duration and offset from TBTT can be set up to quiet the MAC transmits for the required duty cycle (% of quiet duration). The thermal device allows user to configure duty cycle. The quiet params are derived as follows. period = max(25TU, beacon interval / number of bss) duration = period * duty cycle / 100 Quiet mode can be disabled by setting the duty cycle to 0. The cooling device can be found under /sys/class/thermal/cooling_deviceX/. Corresponding soft link to this device can be found under phy folder. /sys/class/ieee80211/phy*/device/cooling_device. To set duty cycle as 40%, echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-12-17 12:22:07 +02:00
#endif
#endif /* _THERMAL_ */
Reference in New Issue Copy Permalink