2007-06-13 23:07:54 +04:00
/*
* VLAN netlink control interface
*
* Copyright ( c ) 2007 Patrick McHardy < kaber @ trash . net >
*
* This program is free software ; you can redistribute it and / or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation .
*/
# include <linux/kernel.h>
# include <linux/netdevice.h>
# include <linux/if_vlan.h>
2011-05-27 17:12:25 +04:00
# include <linux/module.h>
2007-09-17 22:56:21 +04:00
# include <net/net_namespace.h>
2007-06-13 23:07:54 +04:00
# include <net/netlink.h>
# include <net/rtnetlink.h>
# include "vlan.h"
static const struct nla_policy vlan_policy [ IFLA_VLAN_MAX + 1 ] = {
[ IFLA_VLAN_ID ] = { . type = NLA_U16 } ,
[ IFLA_VLAN_FLAGS ] = { . len = sizeof ( struct ifla_vlan_flags ) } ,
[ IFLA_VLAN_EGRESS_QOS ] = { . type = NLA_NESTED } ,
[ IFLA_VLAN_INGRESS_QOS ] = { . type = NLA_NESTED } ,
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
[ IFLA_VLAN_PROTOCOL ] = { . type = NLA_U16 } ,
2007-06-13 23:07:54 +04:00
} ;
static const struct nla_policy vlan_map_policy [ IFLA_VLAN_QOS_MAX + 1 ] = {
[ IFLA_VLAN_QOS_MAPPING ] = { . len = sizeof ( struct ifla_vlan_qos_mapping ) } ,
} ;
static inline int vlan_validate_qos_map ( struct nlattr * attr )
{
if ( ! attr )
return 0 ;
return nla_validate_nested ( attr , IFLA_VLAN_QOS_MAX , vlan_map_policy ) ;
}
static int vlan_validate ( struct nlattr * tb [ ] , struct nlattr * data [ ] )
{
struct ifla_vlan_flags * flags ;
u16 id ;
int err ;
2007-07-12 06:42:31 +04:00
if ( tb [ IFLA_ADDRESS ] ) {
if ( nla_len ( tb [ IFLA_ADDRESS ] ) ! = ETH_ALEN )
return - EINVAL ;
if ( ! is_valid_ether_addr ( nla_data ( tb [ IFLA_ADDRESS ] ) ) )
return - EADDRNOTAVAIL ;
}
2007-06-13 23:07:54 +04:00
if ( ! data )
return - EINVAL ;
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
if ( data [ IFLA_VLAN_PROTOCOL ] ) {
switch ( nla_get_be16 ( data [ IFLA_VLAN_PROTOCOL ] ) ) {
2014-03-12 21:04:15 +04:00
case htons ( ETH_P_8021Q ) :
case htons ( ETH_P_8021AD ) :
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
break ;
default :
return - EPROTONOSUPPORT ;
}
}
2007-06-13 23:07:54 +04:00
if ( data [ IFLA_VLAN_ID ] ) {
id = nla_get_u16 ( data [ IFLA_VLAN_ID ] ) ;
if ( id > = VLAN_VID_MASK )
return - ERANGE ;
}
if ( data [ IFLA_VLAN_FLAGS ] ) {
flags = nla_data ( data [ IFLA_VLAN_FLAGS ] ) ;
2008-07-06 08:26:57 +04:00
if ( ( flags - > flags & flags - > mask ) &
2009-11-25 10:54:54 +03:00
~ ( VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP |
2013-02-08 21:17:07 +04:00
VLAN_FLAG_LOOSE_BINDING | VLAN_FLAG_MVRP ) )
2007-06-13 23:07:54 +04:00
return - EINVAL ;
}
err = vlan_validate_qos_map ( data [ IFLA_VLAN_INGRESS_QOS ] ) ;
if ( err < 0 )
return err ;
err = vlan_validate_qos_map ( data [ IFLA_VLAN_EGRESS_QOS ] ) ;
if ( err < 0 )
return err ;
return 0 ;
}
static int vlan_changelink ( struct net_device * dev ,
struct nlattr * tb [ ] , struct nlattr * data [ ] )
{
struct ifla_vlan_flags * flags ;
struct ifla_vlan_qos_mapping * m ;
struct nlattr * attr ;
int rem ;
if ( data [ IFLA_VLAN_FLAGS ] ) {
flags = nla_data ( data [ IFLA_VLAN_FLAGS ] ) ;
2008-07-06 08:26:27 +04:00
vlan_dev_change_flags ( dev , flags - > flags , flags - > mask ) ;
2007-06-13 23:07:54 +04:00
}
if ( data [ IFLA_VLAN_INGRESS_QOS ] ) {
nla_for_each_nested ( attr , data [ IFLA_VLAN_INGRESS_QOS ] , rem ) {
m = nla_data ( attr ) ;
vlan_dev_set_ingress_priority ( dev , m - > to , m - > from ) ;
}
}
if ( data [ IFLA_VLAN_EGRESS_QOS ] ) {
nla_for_each_nested ( attr , data [ IFLA_VLAN_EGRESS_QOS ] , rem ) {
m = nla_data ( attr ) ;
vlan_dev_set_egress_priority ( dev , m - > from , m - > to ) ;
}
}
return 0 ;
}
2009-11-08 11:53:51 +03:00
static int vlan_newlink ( struct net * src_net , struct net_device * dev ,
2007-06-13 23:07:54 +04:00
struct nlattr * tb [ ] , struct nlattr * data [ ] )
{
2011-12-08 08:11:15 +04:00
struct vlan_dev_priv * vlan = vlan_dev_priv ( dev ) ;
2007-06-13 23:07:54 +04:00
struct net_device * real_dev ;
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
__be16 proto ;
2007-06-13 23:07:54 +04:00
int err ;
if ( ! data [ IFLA_VLAN_ID ] )
return - EINVAL ;
if ( ! tb [ IFLA_LINK ] )
return - EINVAL ;
2009-11-08 11:53:51 +03:00
real_dev = __dev_get_by_index ( src_net , nla_get_u32 ( tb [ IFLA_LINK ] ) ) ;
2007-06-13 23:07:54 +04:00
if ( ! real_dev )
return - ENODEV ;
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
if ( data [ IFLA_VLAN_PROTOCOL ] )
proto = nla_get_be16 ( data [ IFLA_VLAN_PROTOCOL ] ) ;
else
proto = htons ( ETH_P_8021Q ) ;
vlan - > vlan_proto = proto ;
2013-04-19 06:04:29 +04:00
vlan - > vlan_id = nla_get_u16 ( data [ IFLA_VLAN_ID ] ) ;
vlan - > real_dev = real_dev ;
vlan - > flags = VLAN_FLAG_REORDER_HDR ;
2007-06-13 23:07:54 +04:00
2013-04-19 06:04:29 +04:00
err = vlan_check_real_dev ( real_dev , vlan - > vlan_proto , vlan - > vlan_id ) ;
2007-06-13 23:07:54 +04:00
if ( err < 0 )
return err ;
if ( ! tb [ IFLA_MTU ] )
dev - > mtu = real_dev - > mtu ;
else if ( dev - > mtu > real_dev - > mtu )
return - EINVAL ;
err = vlan_changelink ( dev , tb , data ) ;
if ( err < 0 )
return err ;
return register_vlan_dev ( dev ) ;
}
static inline size_t vlan_qos_map_size ( unsigned int n )
{
if ( n = = 0 )
return 0 ;
/* IFLA_VLAN_{EGRESS,INGRESS}_QOS + n * IFLA_VLAN_QOS_MAPPING */
return nla_total_size ( sizeof ( struct nlattr ) ) +
nla_total_size ( sizeof ( struct ifla_vlan_qos_mapping ) ) * n ;
}
static size_t vlan_get_size ( const struct net_device * dev )
{
2011-12-08 08:11:15 +04:00
struct vlan_dev_priv * vlan = vlan_dev_priv ( dev ) ;
2007-06-13 23:07:54 +04:00
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
return nla_total_size ( 2 ) + /* IFLA_VLAN_PROTOCOL */
nla_total_size ( 2 ) + /* IFLA_VLAN_ID */
2013-10-08 01:19:58 +04:00
nla_total_size ( sizeof ( struct ifla_vlan_flags ) ) + /* IFLA_VLAN_FLAGS */
2007-06-13 23:07:54 +04:00
vlan_qos_map_size ( vlan - > nr_ingress_mappings ) +
vlan_qos_map_size ( vlan - > nr_egress_mappings ) ;
}
static int vlan_fill_info ( struct sk_buff * skb , const struct net_device * dev )
{
2011-12-08 08:11:15 +04:00
struct vlan_dev_priv * vlan = vlan_dev_priv ( dev ) ;
2007-06-13 23:07:54 +04:00
struct vlan_priority_tci_mapping * pm ;
struct ifla_vlan_flags f ;
struct ifla_vlan_qos_mapping m ;
struct nlattr * nest ;
unsigned int i ;
net: vlan: add 802.1ad support
Add support for 802.1ad VLAN devices. This mainly consists of checking for
ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check
offloading capabilities based on the used protocol.
Configuration is done using "ip link":
# ip link add link eth0 eth0.1000 \
type vlan proto 802.1ad id 1000
# ip link add link eth0.1000 eth0.1000.1000 \
type vlan proto 802.1q id 1000
52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64
92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84)
20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 06:04:31 +04:00
if ( nla_put_be16 ( skb , IFLA_VLAN_PROTOCOL , vlan - > vlan_proto ) | |
nla_put_u16 ( skb , IFLA_VLAN_ID , vlan - > vlan_id ) )
2012-04-02 04:50:45 +04:00
goto nla_put_failure ;
2007-06-13 23:07:54 +04:00
if ( vlan - > flags ) {
f . flags = vlan - > flags ;
f . mask = ~ 0 ;
2012-04-02 04:50:45 +04:00
if ( nla_put ( skb , IFLA_VLAN_FLAGS , sizeof ( f ) , & f ) )
goto nla_put_failure ;
2007-06-13 23:07:54 +04:00
}
if ( vlan - > nr_ingress_mappings ) {
nest = nla_nest_start ( skb , IFLA_VLAN_INGRESS_QOS ) ;
if ( nest = = NULL )
goto nla_put_failure ;
for ( i = 0 ; i < ARRAY_SIZE ( vlan - > ingress_priority_map ) ; i + + ) {
if ( ! vlan - > ingress_priority_map [ i ] )
continue ;
m . from = i ;
m . to = vlan - > ingress_priority_map [ i ] ;
2012-04-02 04:50:45 +04:00
if ( nla_put ( skb , IFLA_VLAN_QOS_MAPPING ,
sizeof ( m ) , & m ) )
goto nla_put_failure ;
2007-06-13 23:07:54 +04:00
}
nla_nest_end ( skb , nest ) ;
}
if ( vlan - > nr_egress_mappings ) {
nest = nla_nest_start ( skb , IFLA_VLAN_EGRESS_QOS ) ;
if ( nest = = NULL )
goto nla_put_failure ;
for ( i = 0 ; i < ARRAY_SIZE ( vlan - > egress_priority_map ) ; i + + ) {
for ( pm = vlan - > egress_priority_map [ i ] ; pm ;
pm = pm - > next ) {
if ( ! pm - > vlan_qos )
continue ;
m . from = pm - > priority ;
m . to = ( pm - > vlan_qos > > 13 ) & 0x7 ;
2012-04-02 04:50:45 +04:00
if ( nla_put ( skb , IFLA_VLAN_QOS_MAPPING ,
sizeof ( m ) , & m ) )
goto nla_put_failure ;
2007-06-13 23:07:54 +04:00
}
}
nla_nest_end ( skb , nest ) ;
}
return 0 ;
nla_put_failure :
return - EMSGSIZE ;
}
struct rtnl_link_ops vlan_link_ops __read_mostly = {
. kind = " vlan " ,
. maxtype = IFLA_VLAN_MAX ,
. policy = vlan_policy ,
2011-12-08 08:11:15 +04:00
. priv_size = sizeof ( struct vlan_dev_priv ) ,
2007-06-13 23:07:54 +04:00
. setup = vlan_setup ,
. validate = vlan_validate ,
. newlink = vlan_newlink ,
. changelink = vlan_changelink ,
2008-01-21 11:25:50 +03:00
. dellink = unregister_vlan_dev ,
2007-06-13 23:07:54 +04:00
. get_size = vlan_get_size ,
. fill_info = vlan_fill_info ,
} ;
int __init vlan_netlink_init ( void )
{
return rtnl_link_register ( & vlan_link_ops ) ;
}
void __exit vlan_netlink_fini ( void )
{
rtnl_link_unregister ( & vlan_link_ops ) ;
}
MODULE_ALIAS_RTNL_LINK ( " vlan " ) ;