iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
9cef749269
linux/arch/blackfin/mach-bf548/Kconfig

334 lines
6.0 KiB
Plaintext
Raw Normal View History

Blackfin arch: initial supporting for BF548-EZKIT The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 18:41:45 +04:00
if (BF54x)
Blackfin arch: split board selection off into mach subdirs Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 15:49:44 +03:00
source "arch/blackfin/mach-bf548/boards/Kconfig"
Blackfin arch: initial supporting for BF548-EZKIT The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 18:41:45 +04:00
menu "BF548 Specific Configuration"
Blackfin arch: Add option to priorize DMA over Core Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 13:43:29 +04:00
config DEB_DMA_URGENT
bool "DMA has priority over core for ext. accesses"
depends on BF54x
[Blackfin] arch: set default value of DEB_DMA_URGENT to YES to avoid DMA aborting caused by conflict between core and DMA Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24 07:33:20 +03:00
default y
Blackfin arch: Add option to priorize DMA over Core Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03 13:43:29 +04:00
help
Treat any DEB1, DEB2 and DEB3 request as Urgent
Blackfin: Allow bf548 ATAPI to be routed to GPIO By default, it is routed to async memory address. In GPIO case, GPIO peripheral PINs should be requested in advance. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-30 13:07:26 +04:00
config BF548_ATAPI_ALTERNATIVE_PORT
bool "BF548 ATAPI alternative port via GPIO"
help
BF548 ATAPI data and address PINs can be routed through
async address or GPIO port F and G. Select y to route it
to GPIO.
Blackfin arch: initial supporting for BF548-EZKIT The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 18:41:45 +04:00
comment "Interrupt Priority Assignment"
menu "Priority"
config IRQ_PLL_WAKEUP
int "IRQ_PLL_WAKEUP"
default 7
config IRQ_DMAC0_ERR
int "IRQ_DMAC0_ERR"
default 7
config IRQ_EPPI0_ERR
int "IRQ_EPPI0_ERR"
default 7
config IRQ_SPORT0_ERR
int "IRQ_SPORT0_ERR"
default 7
config IRQ_SPORT1_ERR
int "IRQ_SPORT1_ERR"
default 7
config IRQ_SPI0_ERR
int "IRQ_SPI0_ERR"
default 7
config IRQ_UART0_ERR
int "IRQ_UART0_ERR"
default 7
config IRQ_RTC
int "IRQ_RTC"
default 8
config IRQ_EPPI0
int "IRQ_EPPI0"
default 8
config IRQ_SPORT0_RX
int "IRQ_SPORT0_RX"
default 9
config IRQ_SPORT0_TX
int "IRQ_SPORT0_TX"
default 9
config IRQ_SPORT1_RX
int "IRQ_SPORT1_RX"
default 9
config IRQ_SPORT1_TX
int "IRQ_SPORT1_TX"
default 9
config IRQ_SPI0
int "IRQ_SPI0"
default 10
config IRQ_UART0_RX
int "IRQ_UART0_RX"
default 10
config IRQ_UART0_TX
int "IRQ_UART0_TX"
default 10
config IRQ_TIMER8
int "IRQ_TIMER8"
default 11
config IRQ_TIMER9
int "IRQ_TIMER9"
default 11
config IRQ_TIMER10
int "IRQ_TIMER10"
default 11
config IRQ_PINT0
int "IRQ_PINT0"
default 12
config IRQ_PINT1
int "IRQ_PINT0"
default 12
config IRQ_MDMAS0
int "IRQ_MDMAS0"
default 13
config IRQ_MDMAS1
int "IRQ_DMDMAS1"
default 13
config IRQ_WATCHDOG
int "IRQ_WATCHDOG"
default 13
config IRQ_DMAC1_ERR
int "IRQ_DMAC1_ERR"
default 7
config IRQ_SPORT2_ERR
int "IRQ_SPORT2_ERR"
default 7
config IRQ_SPORT3_ERR
int "IRQ_SPORT3_ERR"
default 7
config IRQ_MXVR_DATA
int "IRQ MXVR Data"
default 7
config IRQ_SPI1_ERR
int "IRQ_SPI1_ERR"
default 7
config IRQ_SPI2_ERR
int "IRQ_SPI2_ERR"
default 7
config IRQ_UART1_ERR
int "IRQ_UART1_ERR"
default 7
config IRQ_UART2_ERR
int "IRQ_UART2_ERR"
default 7
config IRQ_CAN0_ERR
int "IRQ_CAN0_ERR"
default 7
config IRQ_SPORT2_RX
int "IRQ_SPORT2_RX"
default 9
config IRQ_SPORT2_TX
int "IRQ_SPORT2_TX"
default 9
config IRQ_SPORT3_RX
int "IRQ_SPORT3_RX"
default 9
config IRQ_SPORT3_TX
int "IRQ_SPORT3_TX"
default 9
config IRQ_EPPI1
int "IRQ_EPPI1"
default 9
config IRQ_EPPI2
int "IRQ_EPPI2"
default 9
config IRQ_SPI1
int "IRQ_SPI1"
default 10
config IRQ_SPI2
int "IRQ_SPI2"
default 10
config IRQ_UART1_RX
int "IRQ_UART1_RX"
default 10
config IRQ_UART1_TX
int "IRQ_UART1_TX"
default 10
config IRQ_ATAPI_RX
int "IRQ_ATAPI_RX"
default 10
config IRQ_ATAPI_TX
int "IRQ_ATAPI_TX"
default 10
config IRQ_TWI0
int "IRQ_TWI0"
default 11
config IRQ_TWI1
int "IRQ_TWI1"
default 11
config IRQ_CAN0_RX
int "IRQ_CAN_RX"
default 11
config IRQ_CAN0_TX
int "IRQ_CAN_TX"
default 11
config IRQ_MDMAS2
int "IRQ_MDMAS2"
default 13
config IRQ_MDMAS3
int "IRQ_DMMAS3"
default 13
config IRQ_MXVR_ERR
int "IRQ_MXVR_ERR"
default 11
config IRQ_MXVR_MSG
int "IRQ_MXVR_MSG"
default 11
config IRQ_MXVR_PKT
int "IRQ_MXVR_PKT"
default 11
config IRQ_EPPI1_ERR
int "IRQ_EPPI1_ERR"
default 7
config IRQ_EPPI2_ERR
int "IRQ_EPPI2_ERR"
default 7
config IRQ_UART3_ERR
int "IRQ_UART3_ERR"
default 7
config IRQ_HOST_ERR
int "IRQ_HOST_ERR"
default 7
config IRQ_PIXC_ERR
int "IRQ_PIXC_ERR"
default 7
config IRQ_NFC_ERR
int "IRQ_NFC_ERR"
default 7
config IRQ_ATAPI_ERR
int "IRQ_ATAPI_ERR"
default 7
config IRQ_CAN1_ERR
int "IRQ_CAN1_ERR"
default 7
config IRQ_HS_DMA_ERR
int "IRQ Handshake DMA Status"
default 7
config IRQ_PIXC_IN0
int "IRQ PIXC IN0"
default 8
config IRQ_PIXC_IN1
int "IRQ PIXC IN1"
default 8
config IRQ_PIXC_OUT
int "IRQ PIXC OUT"
default 8
config IRQ_SDH
int "IRQ SDH"
default 8
config IRQ_CNT
int "IRQ CNT"
default 8
config IRQ_KEY
int "IRQ KEY"
default 8
config IRQ_CAN1_RX
int "IRQ CAN1 RX"
default 11
config IRQ_CAN1_TX
int "IRQ_CAN1_TX"
default 11
config IRQ_SDH_MASK0
int "IRQ_SDH_MASK0"
default 11
config IRQ_SDH_MASK1
int "IRQ_SDH_MASK1"
default 11
config IRQ_USB_INT0
int "IRQ USB INT0"
default 11
config IRQ_USB_INT1
int "IRQ USB INT1"
default 11
config IRQ_USB_INT2
int "IRQ USB INT2"
default 11
config IRQ_USB_DMA
int "IRQ USB DMA"
default 11
config IRQ_OTPSEC
int "IRQ OPTSEC"
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
Blackfin: add support for gptimer0 as a tick source For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-15 15:01:59 +04:00
default 7 if TICKSOURCE_GPTMR0
Blackfin arch: merge adeos blackfin part to arch/blackfin/ [Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 18:14:39 +03:00
default 8
Blackfin arch: initial supporting for BF548-EZKIT The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 18:41:45 +04:00
config IRQ_TIMER1
int "IRQ_TIMER1"
default 11
config IRQ_TIMER2
int "IRQ_TIMER2"
default 11
config IRQ_TIMER3
int "IRQ_TIMER3"
default 11
config IRQ_TIMER4
int "IRQ_TIMER4"
default 11
config IRQ_TIMER5
int "IRQ_TIMER5"
default 11
config IRQ_TIMER6
int "IRQ_TIMER6"
default 11
config IRQ_TIMER7
int "IRQ_TIMER7"
default 11
config IRQ_PINT2
int "IRQ_PIN2"
default 11
config IRQ_PINT3
int "IRQ_PIN3"
default 11
help
Enter the priority numbers between 7-13 ONLY. Others are Reserved.
This applies to all the above. It is not recommended to assign the
highest priority number 7 to UART or any other device.
endmenu
Blackfin arch: Enable BF54x PIN/GPIO interrupts Signed-off-bu: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:17:18 +04:00
comment "Pin Interrupt to Port Assignment"
menu "Assignment"
config PINTx_REASSIGN
bool "Reprogram PINT Assignment"
Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 12:27:25 +04:00
default y
Blackfin arch: Enable BF54x PIN/GPIO interrupts Signed-off-bu: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:17:18 +04:00
help
The interrupt assignment registers controls the pin-to-interrupt
assignment in a byte-wide manner. Each option allows you to select
a set of pins (High/Low Byte) of an specific Port being mapped
to one of the four PIN Interrupts IRQ_PINTx.
You shouldn't change any of these unless you know exactly what you're doing.
Please consult the Blackfin BF54x Processor Hardware Reference Manual.
config PINT0_ASSIGN
hex "PINT0_ASSIGN"
depends on PINTx_REASSIGN
default 0x00000101
config PINT1_ASSIGN
hex "PINT1_ASSIGN"
depends on PINTx_REASSIGN
default 0x01010000
config PINT2_ASSIGN
hex "PINT2_ASSIGN"
depends on PINTx_REASSIGN
Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-24 12:27:25 +04:00
default 0x07000101
Blackfin arch: Enable BF54x PIN/GPIO interrupts Signed-off-bu: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:17:18 +04:00
config PINT3_ASSIGN
hex "PINT3_ASSIGN"
depends on PINTx_REASSIGN
default 0x02020303
endmenu
Blackfin arch: initial supporting for BF548-EZKIT The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia applications where system performance and cost are essential ingredients. The integration of multimedia, human interface, and connectivity peripherals combined with increased system bandwidth and on-chip memory provides customers a platform to design the most demanding applications. Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will be submitted later. Please enjoy the show. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 18:41:45 +04:00
endmenu
endif
Reference in New Issue Copy Permalink