iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
9cfc370240
linux/drivers/net/vrf.c

1486 lines
34 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 09:55:01 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
/*
* vrf.c: device driver to encapsulate a VRF space
*
* Copyright (c) 2015 Cumulus Networks. All rights reserved.
* Copyright (c) 2015 Shrijeet Mukherjee <shm@cumulusnetworks.com>
* Copyright (c) 2015 David Ahern <dsa@cumulusnetworks.com>
*
* Based on dummy, team and ipvlan drivers
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/netfilter.h>
#include <linux/rtnetlink.h>
#include <net/rtnetlink.h>
#include <linux/u64_stats_sync.h>
#include <linux/hashtable.h>
#include <linux/inetdevice.h>
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
#include <net/arp.h>
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
#include <net/ip.h>
#include <net/ip_fib.h>
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#include <net/ip6_fib.h>
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
#include <net/ip6_route.h>
#include <net/route.h>
#include <net/addrconf.h>
net: Add support for l3mdev ops to VRF driver Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:12 +03:00
#include <net/l3mdev.h>
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
#include <net/fib_rules.h>
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
#include <net/netns/generic.h>
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
#define DRV_NAME "vrf"
#define DRV_VERSION "1.0"
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
#define FIB_RULE_PREF 1000 /* default preference for FIB rules */
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
static unsigned int vrf_net_id;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
net: Remove vrf header file Move remaining structs to VRF driver and delete the vrf header file. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:17 +03:00
struct net_vrf {
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
struct rtable __rcu *rth;
struct rt6_info __rcu *rt6;
vrf: Move fib6_table into net_vrf A later patch removes rt6i_table from rt6_info. Save the ipv6 table for a VRF in net_vrf. fib tables can not be deleted so no reference counting or locking is required. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 03:33:09 +03:00
#if IS_ENABLED(CONFIG_IPV6)
struct fib6_table *fib6_table;
#endif
net: Remove vrf header file Move remaining structs to VRF driver and delete the vrf header file. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:17 +03:00
u32 tb_id;
};
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
struct pcpu_dstats {
u64 tx_pkts;
u64 tx_bytes;
u64 tx_drps;
u64 rx_pkts;
u64 rx_bytes;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
u64 rx_drps;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
struct u64_stats_sync syncp;
};
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
static void vrf_rx_stats(struct net_device *dev, int len)
{
struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
u64_stats_update_begin(&dstats->syncp);
dstats->rx_pkts++;
dstats->rx_bytes += len;
u64_stats_update_end(&dstats->syncp);
}
vrf: plug skb leaks Currently whenever a packet different from ETH_P_IP is sent through the VRF device it is leaked so plug the leaks and properly drop these packets. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19 06:12:29 +03:00
static void vrf_tx_error(struct net_device *vrf_dev, struct sk_buff *skb)
{
vrf_dev->stats.tx_errors++;
kfree_skb(skb);
}
net: make ndo_get_stats64 a void function The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07 06:12:52 +03:00
static void vrf_get_stats64(struct net_device *dev,
struct rtnl_link_stats64 *stats)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
int i;
for_each_possible_cpu(i) {
const struct pcpu_dstats *dstats;
u64 tbytes, tpkts, tdrops, rbytes, rpkts;
unsigned int start;
dstats = per_cpu_ptr(dev->dstats, i);
do {
start = u64_stats_fetch_begin_irq(&dstats->syncp);
tbytes = dstats->tx_bytes;
tpkts = dstats->tx_pkts;
tdrops = dstats->tx_drps;
rbytes = dstats->rx_bytes;
rpkts = dstats->rx_pkts;
} while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
stats->tx_bytes += tbytes;
stats->tx_packets += tpkts;
stats->tx_dropped += tdrops;
stats->rx_bytes += rbytes;
stats->rx_packets += rpkts;
}
}
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
/* by default VRF devices do not have a qdisc and are expected
* to be created with only a single queue.
*/
static bool qdisc_tx_is_default(const struct net_device *dev)
{
struct netdev_queue *txq;
struct Qdisc *qdisc;
if (dev->num_tx_queues > 1)
return false;
txq = netdev_get_tx_queue(dev, 0);
qdisc = rcu_access_pointer(txq->qdisc);
return !qdisc->enqueue;
}
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
/* Local traffic destined to local address. Reinsert the packet to rx
* path, similar to loopback handling.
*/
static int vrf_local_xmit(struct sk_buff *skb, struct net_device *dev,
struct dst_entry *dst)
{
int len = skb->len;
skb_orphan(skb);
skb_dst_set(skb, dst);
/* set pkt_type to avoid skb hitting packet taps twice -
* once on Tx and again in Rx processing
*/
skb->pkt_type = PACKET_LOOPBACK;
skb->protocol = eth_type_trans(skb, dev);
if (likely(netif_rx(skb) == NET_RX_SUCCESS))
vrf_rx_stats(dev, len);
else
this_cpu_inc(dev->dstats->rx_drps);
return NETDEV_TX_OK;
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#if IS_ENABLED(CONFIG_IPV6)
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
static int vrf_ip6_local_out(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
int err;
err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net,
sk, skb, NULL, skb_dst(skb)->dev, dst_output);
if (likely(err == 1))
err = dst_output(net, sk, skb);
return err;
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
static netdev_tx_t vrf_process_v6_outbound(struct sk_buff *skb,
struct net_device *dev)
{
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
const struct ipv6hdr *iph;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
struct net *net = dev_net(skb->dev);
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
struct flowi6 fl6;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
int ret = NET_XMIT_DROP;
struct dst_entry *dst;
struct dst_entry *dst_null = &net->ipv6.ip6_null_entry->dst;
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct ipv6hdr)))
goto err;
iph = ipv6_hdr(skb);
memset(&fl6, 0, sizeof(fl6));
/* needed to match OIF rule */
fl6.flowi6_oif = dev->ifindex;
fl6.flowi6_iif = LOOPBACK_IFINDEX;
fl6.daddr = iph->daddr;
fl6.saddr = iph->saddr;
fl6.flowlabel = ip6_flowinfo(iph);
fl6.flowi6_mark = skb->mark;
fl6.flowi6_proto = iph->nexthdr;
fl6.flowi6_flags = FLOWI_FLAG_SKIP_NH_OIF;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
dst = ip6_route_output(net, NULL, &fl6);
if (dst == dst_null)
goto err;
skb_dst_drop(skb);
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
/* if dst.dev is loopback or the VRF device again this is locally
* originated traffic destined to a local address. Short circuit
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
* to Rx path
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
*/
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
if (dst->dev == dev)
return vrf_local_xmit(skb, dev, dst);
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
skb_dst_set(skb, dst);
net: vrf: Minor refactoring for local address patches Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:38 +03:00
/* strip the ethernet header added for pass through VRF device */
__skb_pull(skb, skb_network_offset(skb));
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
ret = vrf_ip6_local_out(net, skb->sk, skb);
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
if (unlikely(net_xmit_eval(ret)))
dev->stats.tx_errors++;
else
ret = NET_XMIT_SUCCESS;
return ret;
err:
vrf_tx_error(dev, skb);
return NET_XMIT_DROP;
}
#else
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static netdev_tx_t vrf_process_v6_outbound(struct sk_buff *skb,
struct net_device *dev)
{
vrf: plug skb leaks Currently whenever a packet different from ETH_P_IP is sent through the VRF device it is leaked so plug the leaks and properly drop these packets. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19 06:12:29 +03:00
vrf_tx_error(dev, skb);
return NET_XMIT_DROP;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#endif
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
/* based on ip_local_out; can't use it b/c the dst is switched pointing to us */
static int vrf_ip_local_out(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
int err;
err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, skb_dst(skb)->dev, dst_output);
if (likely(err == 1))
err = dst_output(net, sk, skb);
return err;
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static netdev_tx_t vrf_process_v4_outbound(struct sk_buff *skb,
struct net_device *vrf_dev)
{
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
struct iphdr *ip4h;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
int ret = NET_XMIT_DROP;
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
struct flowi4 fl4;
net: vrf: Minor refactoring for local address patches Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:38 +03:00
struct net *net = dev_net(vrf_dev);
struct rtable *rt;
vrf: make sure skb->data contains ip header to make routing vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19 11:11:47 +03:00
if (!pskb_may_pull(skb, ETH_HLEN + sizeof(struct iphdr)))
goto err;
ip4h = ip_hdr(skb);
memset(&fl4, 0, sizeof(fl4));
/* needed to match OIF rule */
fl4.flowi4_oif = vrf_dev->ifindex;
fl4.flowi4_iif = LOOPBACK_IFINDEX;
fl4.flowi4_tos = RT_TOS(ip4h->tos);
fl4.flowi4_flags = FLOWI_FLAG_ANYSRC | FLOWI_FLAG_SKIP_NH_OIF;
fl4.flowi4_proto = ip4h->protocol;
fl4.daddr = ip4h->daddr;
fl4.saddr = ip4h->saddr;
net: vrf: Minor refactoring for local address patches Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:38 +03:00
rt = ip_route_output_flow(net, &fl4, NULL);
if (IS_ERR(rt))
goto err;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Minor refactoring for local address patches Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:38 +03:00
skb_dst_drop(skb);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
/* if dst.dev is loopback or the VRF device again this is locally
* originated traffic destined to a local address. Short circuit
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
* to Rx path
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
*/
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
if (rt->dst.dev == vrf_dev)
return vrf_local_xmit(skb, vrf_dev, &rt->dst);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
net: vrf: Minor refactoring for local address patches Move the stripping of the ethernet header from is_ip_tx_frame into the ipv4 and ipv6 outbound functions and collapse vrf_send_v4_prep into vrf_process_v4_outbound. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:38 +03:00
skb_dst_set(skb, &rt->dst);
/* strip the ethernet header added for pass through VRF device */
__skb_pull(skb, skb_network_offset(skb));
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (!ip4h->saddr) {
ip4h->saddr = inet_select_addr(skb_dst(skb)->dev, 0,
RT_SCOPE_LINK);
}
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
ret = vrf_ip_local_out(dev_net(skb_dst(skb)->dev), skb->sk, skb);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (unlikely(net_xmit_eval(ret)))
vrf_dev->stats.tx_errors++;
else
ret = NET_XMIT_SUCCESS;
out:
return ret;
err:
vrf: plug skb leaks Currently whenever a packet different from ETH_P_IP is sent through the VRF device it is leaked so plug the leaks and properly drop these packets. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19 06:12:29 +03:00
vrf_tx_error(vrf_dev, skb);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
goto out;
}
static netdev_tx_t is_ip_tx_frame(struct sk_buff *skb, struct net_device *dev)
{
switch (skb->protocol) {
case htons(ETH_P_IP):
return vrf_process_v4_outbound(skb, dev);
case htons(ETH_P_IPV6):
return vrf_process_v6_outbound(skb, dev);
default:
vrf: plug skb leaks Currently whenever a packet different from ETH_P_IP is sent through the VRF device it is leaked so plug the leaks and properly drop these packets. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-19 06:12:29 +03:00
vrf_tx_error(dev, skb);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return NET_XMIT_DROP;
}
}
static netdev_tx_t vrf_xmit(struct sk_buff *skb, struct net_device *dev)
{
vrf: Fix use-after-free in vrf_xmit KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:53:04 +03:00
int len = skb->len;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
netdev_tx_t ret = is_ip_tx_frame(skb, dev);
if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
u64_stats_update_begin(&dstats->syncp);
dstats->tx_pkts++;
vrf: Fix use-after-free in vrf_xmit KASAN detected a use-after-free: [ 269.467067] BUG: KASAN: use-after-free in vrf_xmit+0x7f1/0x827 [vrf] at addr ffff8800350a21c0 [ 269.467067] Read of size 4 by task ssh/1879 [ 269.467067] CPU: 1 PID: 1879 Comm: ssh Not tainted 4.10.0+ #249 [ 269.467067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 269.467067] Call Trace: [ 269.467067] dump_stack+0x81/0xb6 [ 269.467067] kasan_object_err+0x21/0x78 [ 269.467067] kasan_report+0x2f7/0x450 [ 269.467067] ? vrf_xmit+0x7f1/0x827 [vrf] [ 269.467067] ? ip_output+0xa4/0xdb [ 269.467067] __asan_load4+0x6b/0x6d [ 269.467067] vrf_xmit+0x7f1/0x827 [vrf] ... Which corresponds to the skb access after xmit handling. Fix by saving skb->len and using the saved value to update stats. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:53:04 +03:00
dstats->tx_bytes += len;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
u64_stats_update_end(&dstats->syncp);
} else {
this_cpu_inc(dev->dstats->tx_drps);
}
return ret;
}
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
static int vrf_finish_direct(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
struct net_device *vrf_dev = skb->dev;
if (!list_empty(&vrf_dev->ptype_all) &&
likely(skb_headroom(skb) >= ETH_HLEN)) {
networking: make skb_push & __skb_push return void pointers It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 15:29:23 +03:00
struct ethhdr *eth = skb_push(skb, ETH_HLEN);
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
ether_addr_copy(eth->h_source, vrf_dev->dev_addr);
eth_zero_addr(eth->h_dest);
eth->h_proto = skb->protocol;
rcu_read_lock_bh();
dev_queue_xmit_nit(skb, vrf_dev);
rcu_read_unlock_bh();
skb_pull(skb, ETH_HLEN);
}
return 1;
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#if IS_ENABLED(CONFIG_IPV6)
/* modelled after ip6_finish_output2 */
static int vrf_finish_output6(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
struct net_device *dev = dst->dev;
ipv6: constify rt6_nexthop() There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24 17:01:08 +03:00
const struct in6_addr *nexthop;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
struct neighbour *neigh;
int ret;
net: vrf: Drop conntrack data after pass through VRF device on Tx Locally originated traffic in a VRF fails in the presence of a POSTROUTING rule. For example, $ iptables -t nat -A POSTROUTING -s 11.1.1.0/24 -j MASQUERADE $ ping -I red -c1 11.1.1.3 ping: Warning: source address might be selected on device other than red. PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data. ping: sendmsg: Operation not permitted Worse, the above causes random corruption resulting in a panic in random places (I have not seen a consistent backtrace). Call nf_reset to drop the conntrack info following the pass through the VRF device. The nf_reset is needed on Tx but not Rx because of the order in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress device and on Tx it is is before the real egress device. Connection tracking should be tied to the real egress device and not the VRF device. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15 01:31:11 +03:00
nf_reset(skb);
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
skb->protocol = htons(ETH_P_IPV6);
skb->dev = dev;
rcu_read_lock_bh();
nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr);
neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false);
if (!IS_ERR(neigh)) {
net: add dst_pending_confirm flag to skbuff Add new skbuff flag to allow protocols to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Add sock_confirm_neigh() helper to confirm the neighbour and use it for IPv4, IPv6 and VRF before dst_neigh_output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 00:14:12 +03:00
sock_confirm_neigh(skb, neigh);
neighbor: Add skip_cache argument to neigh_output A later patch allows an IPv6 gateway with an IPv4 route. The neighbor entry will exist in the v6 ndisc table and the cached header will contain the ipv6 protocol which is wrong for an IPv4 packet. For an IPv4 packet to use the v6 neighbor entry, neigh_output needs to skip the cached header and just use the output callback for the neigh entry. A future patchset can look at expanding the hh_cache to handle 2 protocols. For now, IPv6 gateways with an IPv4 route will take the extra overhead of generating the header. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06 02:30:33 +03:00
ret = neigh_output(neigh, skb, false);
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
rcu_read_unlock_bh();
return ret;
}
rcu_read_unlock_bh();
IP6_INC_STATS(dev_net(dst->dev),
ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(skb);
return -EINVAL;
}
/* modelled after ip6_output */
static int vrf_output6(struct net *net, struct sock *sk, struct sk_buff *skb)
{
return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING,
net, sk, skb, NULL, skb_dst(skb)->dev,
vrf_finish_output6,
!(IP6CB(skb)->flags & IP6SKB_REROUTED));
}
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
/* set dst on skb to send packet to us via dev_xmit path. Allows
* packet to go through device based features such as qdisc, netfilter
* hooks and packet sockets with skb->dev set to vrf device.
*/
net: vrf: performance improvements for IPv6 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv6 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) from a +3% improvement for UDP which has a lookup per packet (VRF being better than no l3mdev) to ~2% loss for TCP_CRR which connects a socket for each request-response. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:45 +03:00
static struct sk_buff *vrf_ip6_out_redirect(struct net_device *vrf_dev,
struct sk_buff *skb)
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
{
struct net_vrf *vrf = netdev_priv(vrf_dev);
struct dst_entry *dst = NULL;
struct rt6_info *rt6;
rcu_read_lock();
rt6 = rcu_dereference(vrf->rt6);
if (likely(rt6)) {
dst = &rt6->dst;
dst_hold(dst);
}
rcu_read_unlock();
if (unlikely(!dst)) {
vrf_tx_error(vrf_dev, skb);
return NULL;
}
skb_dst_drop(skb);
skb_dst_set(skb, dst);
return skb;
}
net: vrf: performance improvements for IPv6 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv6 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) from a +3% improvement for UDP which has a lookup per packet (VRF being better than no l3mdev) to ~2% loss for TCP_CRR which connects a socket for each request-response. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:45 +03:00
static int vrf_output6_direct(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
skb->protocol = htons(ETH_P_IPV6);
return NF_HOOK_COND(NFPROTO_IPV6, NF_INET_POST_ROUTING,
net, sk, skb, NULL, skb->dev,
vrf_finish_direct,
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
static struct sk_buff *vrf_ip6_out_direct(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb)
{
struct net *net = dev_net(vrf_dev);
int err;
skb->dev = vrf_dev;
err = nf_hook(NFPROTO_IPV6, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_output6_direct);
if (likely(err == 1))
err = vrf_output6_direct(net, sk, skb);
/* reset skb device */
if (likely(err == 1))
nf_reset(skb);
else
skb = NULL;
return skb;
}
static struct sk_buff *vrf_ip6_out(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb)
{
/* don't divert link scope packets */
if (rt6_need_strict(&ipv6_hdr(skb)->daddr))
return skb;
if (qdisc_tx_is_default(vrf_dev))
return vrf_ip6_out_direct(vrf_dev, sk, skb);
return vrf_ip6_out_redirect(vrf_dev, skb);
}
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
/* holding rtnl */
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
static void vrf_rt6_release(struct net_device *dev, struct net_vrf *vrf)
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
{
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
struct rt6_info *rt6 = rtnl_dereference(vrf->rt6);
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
struct net *net = dev_net(dev);
struct dst_entry *dst;
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
RCU_INIT_POINTER(vrf->rt6, NULL);
synchronize_rcu();
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
/* move dev in dst's to loopback so this VRF device can be deleted
* - based on dst_ifdown
*/
if (rt6) {
dst = &rt6->dst;
dev_put(dst->dev);
dst->dev = net->loopback_dev;
dev_hold(dst->dev);
dst_release(dst);
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
}
static int vrf_rt6_create(struct net_device *dev)
{
net: remove DST_NOCACHE flag DST_NOCACHE flag check has been removed from dst_release() and dst_hold_safe() in a previous patch because all the dst are now ref counted properly and can be released based on refcnt only. Looking at the rest of the DST_NOCACHE use, all of them can now be removed or replaced with other checks. So this patch gets rid of all the DST_NOCACHE usage and remove this flag completely. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-17 20:42:42 +03:00
int flags = DST_HOST | DST_NOPOLICY | DST_NOXFRM;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
struct net_vrf *vrf = netdev_priv(dev);
net: vrf: Fix dst reference counting Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 21:10:06 +03:00
struct net *net = dev_net(dev);
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
struct rt6_info *rt6;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
int rc = -ENOMEM;
net: vrf: Fix crash when IPv6 is disabled at boot time Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 20:21:00 +03:00
/* IPv6 can be CONFIG enabled and then disabled runtime */
if (!ipv6_mod_enabled())
return 0;
vrf: Move fib6_table into net_vrf A later patch removes rt6i_table from rt6_info. Save the ipv6 table for a VRF in net_vrf. fib tables can not be deleted so no reference counting or locking is required. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 03:33:09 +03:00
vrf->fib6_table = fib6_new_table(net, vrf->tb_id);
if (!vrf->fib6_table)
net: vrf: Create FIB tables on link create Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05 07:46:12 +03:00
goto out;
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
/* create a dst for routing packets out a VRF device */
rt6 = ip6_dst_alloc(net, dev, flags);
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
if (!rt6)
goto out;
net: vrf: Create FIB tables on link create Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05 07:46:12 +03:00
rt6->dst.output = vrf_output6;
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
rcu_assign_pointer(vrf->rt6, rt6);
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
rc = 0;
out:
return rc;
}
#else
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
static struct sk_buff *vrf_ip6_out(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb)
{
return skb;
}
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
static void vrf_rt6_release(struct net_device *dev, struct net_vrf *vrf)
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
{
}
static int vrf_rt6_create(struct net_device *dev)
{
return 0;
}
#endif
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
/* modelled after ip_finish_output2 */
netfilter: Pass net into okfn This is immediately motivated by the bridge code that chains functions that call into netfilter. Without passing net into the okfns the bridge code would need to guess about the best expression for the network namespace to process packets in. As net is frequently one of the first things computed in continuation functions after netfilter has done it's job passing in the desired network namespace is in many cases a code simplification. To support this change the function dst_output_okfn is introduced to simplify passing dst_output as an okfn. For the moment dst_output_okfn just silently drops the struct net. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 04:04:18 +03:00
static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *skb)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
struct dst_entry *dst = skb_dst(skb);
struct rtable *rt = (struct rtable *)dst;
struct net_device *dev = dst->dev;
unsigned int hh_len = LL_RESERVED_SPACE(dev);
struct neighbour *neigh;
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06 02:30:34 +03:00
bool is_v6gw = false;
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
int ret = -EINVAL;
net: vrf: Drop conntrack data after pass through VRF device on Tx Locally originated traffic in a VRF fails in the presence of a POSTROUTING rule. For example, $ iptables -t nat -A POSTROUTING -s 11.1.1.0/24 -j MASQUERADE $ ping -I red -c1 11.1.1.3 ping: Warning: source address might be selected on device other than red. PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data. ping: sendmsg: Operation not permitted Worse, the above causes random corruption resulting in a panic in random places (I have not seen a consistent backtrace). Call nf_reset to drop the conntrack info following the pass through the VRF device. The nf_reset is needed on Tx but not Rx because of the order in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress device and on Tx it is is before the real egress device. Connection tracking should be tied to the real egress device and not the VRF device. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-15 01:31:11 +03:00
nf_reset(skb);
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
/* Be paranoid, rather than too clever. */
if (unlikely(skb_headroom(skb) < hh_len && dev->header_ops)) {
struct sk_buff *skb2;
skb2 = skb_realloc_headroom(skb, LL_RESERVED_SPACE(dev));
if (!skb2) {
ret = -ENOMEM;
goto err;
}
if (skb->sk)
skb_set_owner_w(skb2, skb->sk);
consume_skb(skb);
skb = skb2;
}
rcu_read_lock_bh();
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06 02:30:34 +03:00
neigh = ip_neigh_for_gw(rt, skb, &is_v6gw);
net: add dst_pending_confirm flag to skbuff Add new skbuff flag to allow protocols to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Add sock_confirm_neigh() helper to confirm the neighbour and use it for IPv4, IPv6 and VRF before dst_neigh_output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 00:14:12 +03:00
if (!IS_ERR(neigh)) {
sock_confirm_neigh(skb, neigh);
ipv4: Add helpers for neigh lookup for nexthop A common theme in the output path is looking up a neigh entry for a nexthop, either the gateway in an rtable or a fallback to the daddr in the skb: nexthop = (__force u32)rt_nexthop(rt, ip_hdr(skb)->daddr); neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); To allow the nexthop to be an IPv6 address we need to consider the family of the nexthop and then call __ipv{4,6}_neigh_lookup_noref based on it. To make this simpler, add a ip_neigh_gw4 helper similar to ip_neigh_gw6 added in an earlier patch which handles: neigh = __ipv4_neigh_lookup_noref(dev, nexthop); if (unlikely(!neigh)) neigh = __neigh_create(&arp_tbl, &nexthop, dev, false); And then add a second one, ip_neigh_for_gw, that calls either ip_neigh_gw4 or ip_neigh_gw6 based on the address family of the gateway. Update the output paths in the VRF driver and core v4 code to use ip_neigh_for_gw simplifying the family based lookup and making both ready for a v6 nexthop. ipv4_neigh_lookup has a different need - the potential to resolve a passed in address in addition to any gateway in the rtable or skb. Since this is a one-off, add ip_neigh_gw4 and ip_neigh_gw6 diectly. The difference between __neigh_create used by the helpers and neigh_create called by ipv4_neigh_lookup is taking a refcount, so add rcu_read_lock_bh and bump the refcnt on the neigh entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06 02:30:34 +03:00
/* if crossing protocols, can not use the cached header */
ret = neigh_output(neigh, skb, is_v6gw);
vrf: Fix use after free and double free in vrf_finish_output Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29 22:49:52 +03:00
rcu_read_unlock_bh();
return ret;
net: add dst_pending_confirm flag to skbuff Add new skbuff flag to allow protocols to confirm neighbour. When same struct dst_entry can be used for many different neighbours we can not use it for pending confirmations. Add sock_confirm_neigh() helper to confirm the neighbour and use it for IPv4, IPv6 and VRF before dst_neigh_output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 00:14:12 +03:00
}
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
rcu_read_unlock_bh();
err:
vrf: Fix use after free and double free in vrf_finish_output Miguel reported an skb use after free / double free in vrf_finish_output when neigh_output returns an error. The vrf driver should return after the call to neigh_output as it takes over the skb on error path as well. Patch is a simplified version of Miguel's patch which was written for 4.9, and updated to top of tree. Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device") Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29 22:49:52 +03:00
vrf_tx_error(skb->dev, skb);
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
return ret;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
dst: Pass net into dst->output The network namespace is already passed into dst_output pass it into dst->output lwt->output and friends. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08 00:48:47 +03:00
static int vrf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
struct net_device *dev = skb_dst(skb)->dev;
netfilter: Pass struct net into the netfilter hooks Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 04:04:16 +03:00
IP_UPD_PO_STATS(net, IPSTATS_MIB_OUT, skb->len);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
skb->dev = dev;
skb->protocol = htons(ETH_P_IP);
netfilter: Pass struct net into the netfilter hooks Pass a network namespace parameter into the netfilter hooks. At the call site of the netfilter hooks the path a packet is taking through the network stack is well known which allows the network namespace to be easily and reliabily. This allows the replacement of magic code like "dev_net(state->in?:state->out)" that appears at the start of most netfilter hooks with "state->net". In almost all cases the network namespace passed in is derived from the first network device passed in, guaranteeing those paths will not see any changes in practice. The exceptions are: xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm) ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp) ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp) ipv4/raw.c:raw_send_hdrinc() sock_net(sk) ipv6/ip6_output.c:ip6_xmit() sock_net(sk) ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev) ipv6/raw.c:raw6_send_hdrinc() sock_net(sk) br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev In all cases these exceptions seem to be a better expression for the network namespace the packet is being processed in then the historic "dev_net(in?in:out)". I am documenting them in case something odd pops up and someone starts trying to track down what happened. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-16 04:04:16 +03:00
return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING,
net, sk, skb, NULL, dev,
net: Add ethernet header for pass through VRF device The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 20:10:50 +03:00
vrf_finish_output,
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
/* set dst on skb to send packet to us via dev_xmit path. Allows
* packet to go through device based features such as qdisc, netfilter
* hooks and packet sockets with skb->dev set to vrf device.
*/
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
static struct sk_buff *vrf_ip_out_redirect(struct net_device *vrf_dev,
struct sk_buff *skb)
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
{
struct net_vrf *vrf = netdev_priv(vrf_dev);
struct dst_entry *dst = NULL;
struct rtable *rth;
rcu_read_lock();
rth = rcu_dereference(vrf->rth);
if (likely(rth)) {
dst = &rth->dst;
dst_hold(dst);
}
rcu_read_unlock();
if (unlikely(!dst)) {
vrf_tx_error(vrf_dev, skb);
return NULL;
}
skb_dst_drop(skb);
skb_dst_set(skb, dst);
return skb;
}
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
static int vrf_output_direct(struct net *net, struct sock *sk,
struct sk_buff *skb)
{
skb->protocol = htons(ETH_P_IP);
return NF_HOOK_COND(NFPROTO_IPV4, NF_INET_POST_ROUTING,
net, sk, skb, NULL, skb->dev,
vrf_finish_direct,
!(IPCB(skb)->flags & IPSKB_REROUTED));
}
static struct sk_buff *vrf_ip_out_direct(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb)
{
struct net *net = dev_net(vrf_dev);
int err;
skb->dev = vrf_dev;
err = nf_hook(NFPROTO_IPV4, NF_INET_LOCAL_OUT, net, sk,
skb, NULL, vrf_dev, vrf_output_direct);
if (likely(err == 1))
err = vrf_output_direct(net, sk, skb);
/* reset skb device */
if (likely(err == 1))
nf_reset(skb);
else
skb = NULL;
return skb;
}
static struct sk_buff *vrf_ip_out(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb)
{
net: vrf: Add support for sends to local broadcast address Sukumar reported that sends to the local broadcast address (255.255.255.255) are broken. Check for the address in vrf driver and do not redirect to the VRF device - similar to multicast packets. With this change sockets can use SO_BINDTODEVICE to specify an egress interface and receive responses. Note: the egress interface can not be a VRF device but needs to be the enslaved device. https://bugzilla.kernel.org/show_bug.cgi?id=198521 Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25 06:37:37 +03:00
/* don't divert multicast or local broadcast */
if (ipv4_is_multicast(ip_hdr(skb)->daddr) ||
ipv4_is_lbcast(ip_hdr(skb)->daddr))
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
return skb;
if (qdisc_tx_is_default(vrf_dev))
return vrf_ip_out_direct(vrf_dev, sk, skb);
return vrf_ip_out_redirect(vrf_dev, skb);
}
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
/* called with rcu lock held */
static struct sk_buff *vrf_l3_out(struct net_device *vrf_dev,
struct sock *sk,
struct sk_buff *skb,
u16 proto)
{
switch (proto) {
case AF_INET:
return vrf_ip_out(vrf_dev, sk, skb);
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
case AF_INET6:
return vrf_ip6_out(vrf_dev, sk, skb);
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
}
return skb;
}
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
/* holding rtnl */
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
static void vrf_rtable_release(struct net_device *dev, struct net_vrf *vrf)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
struct rtable *rth = rtnl_dereference(vrf->rth);
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
struct net *net = dev_net(dev);
struct dst_entry *dst;
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
RCU_INIT_POINTER(vrf->rth, NULL);
synchronize_rcu();
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
/* move dev in dst's to loopback so this VRF device can be deleted
* - based on dst_ifdown
*/
if (rth) {
dst = &rth->dst;
dev_put(dst->dev);
dst->dev = net->loopback_dev;
dev_hold(dst->dev);
dst_release(dst);
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
static int vrf_rtable_create(struct net_device *dev)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
net: Add FIB table id to rtable Add the FIB table id to rtable to make the information available for IPv4 as it is for IPv6. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-02 23:58:35 +03:00
struct net_vrf *vrf = netdev_priv(dev);
net: vrf: Drop local rtable and rt6_info The VRF cached rtable and rt6_info for local traffic are no longer needed and actually prevent local traffic through enslaved devices. Remove them. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12 03:11:14 +03:00
struct rtable *rth;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Create FIB tables on link create Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05 07:46:12 +03:00
if (!fib_new_table(dev_net(dev), vrf->tb_id))
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
return -ENOMEM;
net: vrf: Create FIB tables on link create Tables have to exist for VRFs to function. Ensure they exist when VRF device is created. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-05 07:46:12 +03:00
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
/* create a dst for routing packets out through a VRF device */
net: vrf: Fix dst reference counting Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 21:10:06 +03:00
rth = rt_dst_alloc(dev, 0, RTN_UNICAST, 1, 1, 0);
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
if (!rth)
return -ENOMEM;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
rth->dst.output = vrf_output;
rcu_assign_pointer(vrf->rth, rth);
return 0;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
/**************************** device handling ********************/
/* cycle interface to flush neighbor cache and move routes across tables */
net: vrf: cycle_netdev(): Add an extack argument A follow-up patch will extend dev_change_flags() with an extack argument. Extend cycle_netdev() to have that argument available for the conversion. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 20:05:38 +03:00
static void cycle_netdev(struct net_device *dev,
struct netlink_ext_ack *extack)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
unsigned int flags = dev->flags;
int ret;
if (!netif_running(dev))
return;
net: core: dev: Add extack argument to dev_change_flags() In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 20:05:42 +03:00
ret = dev_change_flags(dev, flags & ~IFF_UP, extack);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (ret >= 0)
net: core: dev: Add extack argument to dev_change_flags() In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_change_flags(). Therefore extend dev_change_flags() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available. Since the function declaration line is changed anyway, name the other function arguments to placate checkpatch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 20:05:42 +03:00
ret = dev_change_flags(dev, flags, extack);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (ret < 0) {
netdev_err(dev,
"Failed to cycle device %s; route tables might be wrong!\n",
dev->name);
}
}
net: Add extack to upper device linking Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:47 +03:00
static int do_vrf_add_slave(struct net_device *dev, struct net_device *port_dev,
struct netlink_ext_ack *extack)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
vrf: remove slave queue and private slave struct The private slave queue and slave struct haven't been used for anything and aren't needed, this allows to reduce memory usage and simplify enslave/release. We can use netdev_for_each_lower_dev() to free the vrf ports when deleting a vrf device. Also if in the future a private struct is needed for each slave, it can be implemented via lower devices' private member (similar to how bonding does it). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24 16:29:16 +03:00
int ret;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Do not allow looback to be moved to a VRF Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26 17:58:22 +03:00
/* do not allow loopback device to be enslaved to a VRF.
* The vrf device acts as the loopback for the vrf.
*/
net: vrf: Add extack messages for enslave errors Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:48 +03:00
if (port_dev == dev_net(dev)->loopback_dev) {
NL_SET_ERR_MSG(extack,
"Can not enslave loopback device to a VRF");
net: vrf: Do not allow looback to be moved to a VRF Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26 17:58:22 +03:00
return -EOPNOTSUPP;
net: vrf: Add extack messages for enslave errors Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:48 +03:00
}
net: vrf: Do not allow looback to be moved to a VRF Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26 17:58:22 +03:00
net: vrf: Set slave's private flag before linking Allow listeners of the subsequent CHANGEUPPER notification to retrieve the VRF's table ID by calling l3mdev_fib_table() with the slave netdev. Without this change, the netdev won't be considered an L3 slave and the function would return 0. This is consistent with other master device such as bridge and bond that set the slave's private flag before linking. It also makes do_vrf_{add,del}_slave() symmetric. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 11:08:15 +03:00
port_dev->priv_flags |= IFF_L3MDEV_SLAVE;
net: Add extack to upper device linking Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:47 +03:00
ret = netdev_master_upper_dev_link(port_dev, dev, NULL, NULL, extack);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (ret < 0)
net: vrf: Set slave's private flag before linking Allow listeners of the subsequent CHANGEUPPER notification to retrieve the VRF's table ID by calling l3mdev_fib_table() with the slave netdev. Without this change, the netdev won't be considered an L3 slave and the function would return 0. This is consistent with other master device such as bridge and bond that set the slave's private flag before linking. It also makes do_vrf_{add,del}_slave() symmetric. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 11:08:15 +03:00
goto err;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: cycle_netdev(): Add an extack argument A follow-up patch will extend dev_change_flags() with an extack argument. Extend cycle_netdev() to have that argument available for the conversion. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 20:05:38 +03:00
cycle_netdev(port_dev, extack);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return 0;
net: vrf: Set slave's private flag before linking Allow listeners of the subsequent CHANGEUPPER notification to retrieve the VRF's table ID by calling l3mdev_fib_table() with the slave netdev. Without this change, the netdev won't be considered an L3 slave and the function would return 0. This is consistent with other master device such as bridge and bond that set the slave's private flag before linking. It also makes do_vrf_{add,del}_slave() symmetric. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-16 11:08:15 +03:00
err:
port_dev->priv_flags &= ~IFF_L3MDEV_SLAVE;
return ret;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
net: Add extack to ndo_add_slave Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:46 +03:00
static int vrf_add_slave(struct net_device *dev, struct net_device *port_dev,
struct netlink_ext_ack *extack)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
net: vrf: Add extack messages for enslave errors Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:48 +03:00
if (netif_is_l3_master(port_dev)) {
NL_SET_ERR_MSG(extack,
"Can not enslave an L3 master device to a VRF");
return -EINVAL;
}
if (netif_is_l3_slave(port_dev))
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return -EINVAL;
net: Add extack to upper device linking Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05 03:48:47 +03:00
return do_vrf_add_slave(dev, port_dev, extack);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
/* inverse of do_vrf_add_slave */
static int do_vrf_del_slave(struct net_device *dev, struct net_device *port_dev)
{
netdev_upper_dev_unlink(port_dev, dev);
net: Add netif_is_l3_slave IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05 18:51:24 +03:00
port_dev->priv_flags &= ~IFF_L3MDEV_SLAVE;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: cycle_netdev(): Add an extack argument A follow-up patch will extend dev_change_flags() with an extack argument. Extend cycle_netdev() to have that argument available for the conversion. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06 20:05:38 +03:00
cycle_netdev(port_dev, NULL);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return 0;
}
static int vrf_del_slave(struct net_device *dev, struct net_device *port_dev)
{
return do_vrf_del_slave(dev, port_dev);
}
static void vrf_dev_uninit(struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
vrf_rtable_release(dev, vrf);
vrf_rt6_release(dev, vrf);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
vrf: don't check for dstats and rth in uninit path dstats and rth are always present because we fail the device registration if they can't be allocated in vrf_init() (ndo_init) so drop the unnecessary checks. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:28:03 +03:00
free_percpu(dev->dstats);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
dev->dstats = NULL;
}
static int vrf_dev_init(struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
if (!dev->dstats)
goto out_nomem;
/* create the default dst which points back to us */
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
if (vrf_rtable_create(dev) != 0)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
goto out_stats;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
if (vrf_rt6_create(dev) != 0)
goto out_rth;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
dev->flags = IFF_MASTER | IFF_NOARP;
net: vrf: set operstate and mtu at link create The VRF device exists to define L3 domains and guide FIB lookups. As such its operstate is not relevant. Seeing 'state UNKNOWN' in the output of 'ip link show' can be confusing, so set operstate at link create. Similarly, the MTU for a VRF device is not used; any fragmentation of the payload is done on the output path based on the real egress device. An MTU of 1500 on the VRF device while enslaved devices have a higher MTU can lead to confusion. Since the VRF MTU is not relevant set to 64k similar to what is done for loopback. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02 07:16:39 +03:00
/* MTU is irrelevant for VRF device; set to 64k similar to lo */
dev->mtu = 64 * 1024;
/* similarly, oper state is irrelevant; set to up to avoid confusion */
dev->operstate = IF_OPER_UP;
net: vrf: call netdev_lockdep_set_classes() In case a qdisc is used on a vrf device, we need to use different lockdep classes to avoid false positives. Use the new netdev_lockdep_set_classes() generic helper. Reported-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 17:45:13 +03:00
netdev_lockdep_set_classes(dev);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return 0;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
out_rth:
net: vrf: Switch dst dev to loopback on device delete Attempting to delete a VRF device with a socket bound to it can stall: unregister_netdevice: waiting for red to become free. Usage count = 1 The unregister is waiting for the dst to be released and with it references to the vrf device. Similar to dst_ifdown switch the dst dev to loopback on delete for all of the dst's for the vrf device and release the references to the vrf device. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 21:37:21 +03:00
vrf_rtable_release(dev, vrf);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
out_stats:
free_percpu(dev->dstats);
dev->dstats = NULL;
out_nomem:
return -ENOMEM;
}
static const struct net_device_ops vrf_netdev_ops = {
.ndo_init = vrf_dev_init,
.ndo_uninit = vrf_dev_uninit,
.ndo_start_xmit = vrf_xmit,
net: vrf: Fix operation not supported when set vrf mac Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <wanghui104@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20 07:09:39 +03:00
.ndo_set_mac_address = eth_mac_addr,
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
.ndo_get_stats64 = vrf_get_stats64,
.ndo_add_slave = vrf_add_slave,
.ndo_del_slave = vrf_del_slave,
};
net: Add support for l3mdev ops to VRF driver Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:12 +03:00
static u32 vrf_fib_table(const struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
return vrf->tb_id;
}
net: vrf: Add support for PREROUTING rules on vrf device Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 04:47:41 +03:00
static int vrf_rcv_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
driver: vrf: Fix one possible use-after-free issue The current codes only deal with the case that the skb is dropped, it may meet one use-after-free issue when NF_HOOK returns 0 that means the skb is stolen by one netfilter rule or hook. When one netfilter rule or hook stoles the skb and return NF_STOLEN, it means the skb is taken by the rule, and other modules should not touch this skb ever. Maybe the skb is queued or freed directly by the rule. Now uses the nf_hook instead of NF_HOOK to get the result of netfilter, and check the return value of nf_hook. Only when its value equals 1, it means the skb could go ahead. Or reset the skb as NULL. BTW, because vrf_rcv_finish is empty function, so needn't invoke it even though nf_hook returns 1. But we need to modify vrf_rcv_finish to deal with the NF_STOLEN case. There are two cases when skb is stolen. 1. The skb is stolen and freed directly. There is nothing we need to do, and vrf_rcv_finish isn't invoked. 2. The skb is queued and reinjected again. The vrf_rcv_finish would be invoked as okfn, so need to free the skb in it. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09 13:27:33 +03:00
kfree_skb(skb);
net: vrf: Add support for PREROUTING rules on vrf device Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 04:47:41 +03:00
return 0;
}
static struct sk_buff *vrf_rcv_nfhook(u8 pf, unsigned int hook,
struct sk_buff *skb,
struct net_device *dev)
{
struct net *net = dev_net(dev);
driver: vrf: Fix one possible use-after-free issue The current codes only deal with the case that the skb is dropped, it may meet one use-after-free issue when NF_HOOK returns 0 that means the skb is stolen by one netfilter rule or hook. When one netfilter rule or hook stoles the skb and return NF_STOLEN, it means the skb is taken by the rule, and other modules should not touch this skb ever. Maybe the skb is queued or freed directly by the rule. Now uses the nf_hook instead of NF_HOOK to get the result of netfilter, and check the return value of nf_hook. Only when its value equals 1, it means the skb could go ahead. Or reset the skb as NULL. BTW, because vrf_rcv_finish is empty function, so needn't invoke it even though nf_hook returns 1. But we need to modify vrf_rcv_finish to deal with the NF_STOLEN case. There are two cases when skb is stolen. 1. The skb is stolen and freed directly. There is nothing we need to do, and vrf_rcv_finish isn't invoked. 2. The skb is queued and reinjected again. The vrf_rcv_finish would be invoked as okfn, so need to free the skb in it. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-09 13:27:33 +03:00
if (nf_hook(pf, hook, net, NULL, skb, dev, NULL, vrf_rcv_finish) != 1)
net: vrf: Add support for PREROUTING rules on vrf device Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 04:47:41 +03:00
skb = NULL; /* kfree_skb(skb) handled by nf code */
return skb;
}
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
#if IS_ENABLED(CONFIG_IPV6)
/* neighbor handling is done with actual device; do not want
* to flip skb->dev for those ndisc packets. This really fails
* for multiple next protocols (e.g., NEXTHDR_HOP). But it is
* a start.
*/
static bool ipv6_ndisc_frame(const struct sk_buff *skb)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
bool rc = false;
if (iph->nexthdr == NEXTHDR_ICMP) {
const struct icmp6hdr *icmph;
struct icmp6hdr _icmph;
icmph = skb_header_pointer(skb, sizeof(*iph),
sizeof(_icmph), &_icmph);
if (!icmph)
goto out;
switch (icmph->icmp6_type) {
case NDISC_ROUTER_SOLICITATION:
case NDISC_ROUTER_ADVERTISEMENT:
case NDISC_NEIGHBOUR_SOLICITATION:
case NDISC_NEIGHBOUR_ADVERTISEMENT:
case NDISC_REDIRECT:
rc = true;
break;
}
}
out:
return rc;
}
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
static struct rt6_info *vrf_ip6_route_lookup(struct net *net,
const struct net_device *dev,
struct flowi6 *fl6,
int ifindex,
net/ipv6: Pass skb to route lookup IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 19:32:17 +03:00
const struct sk_buff *skb,
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
int flags)
{
struct net_vrf *vrf = netdev_priv(dev);
vrf: Move fib6_table into net_vrf A later patch removes rt6i_table from rt6_info. Save the ipv6 table for a VRF in net_vrf. fib tables can not be deleted so no reference counting or locking is required. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18 03:33:09 +03:00
return ip6_pol_route(net, vrf->fib6_table, ifindex, fl6, skb, flags);
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
}
static void vrf_ip6_input_dst(struct sk_buff *skb, struct net_device *vrf_dev,
int ifindex)
{
const struct ipv6hdr *iph = ipv6_hdr(skb);
struct flowi6 fl6 = {
net: vrf: avoid gcc-4.6 warning When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12 23:10:53 +03:00
.flowi6_iif = ifindex,
.flowi6_mark = skb->mark,
.flowi6_proto = iph->nexthdr,
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
.daddr = iph->daddr,
.saddr = iph->saddr,
.flowlabel = ip6_flowinfo(iph),
};
struct net *net = dev_net(vrf_dev);
struct rt6_info *rt6;
net/ipv6: Pass skb to route lookup IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 19:32:17 +03:00
rt6 = vrf_ip6_route_lookup(net, vrf_dev, &fl6, ifindex, skb,
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
RT6_LOOKUP_F_HAS_SADDR | RT6_LOOKUP_F_IFACE);
if (unlikely(!rt6))
return;
if (unlikely(&rt6->dst == &net->ipv6.ip6_null_entry->dst))
return;
skb_dst_set(skb, &rt6->dst);
}
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
int orig_iif = skb->skb_iif;
vrf: mark skb for multicast or link-local as enslaved to VRF The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 18:36:07 +03:00
bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
bool is_ndisc = ipv6_ndisc_frame(skb);
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
vrf: mark skb for multicast or link-local as enslaved to VRF The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 18:36:07 +03:00
/* loopback, multicast & non-ND link-local traffic; do not push through
* packet taps again. Reset pkt_type for upper layers to process skb
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
*/
vrf: mark skb for multicast or link-local as enslaved to VRF The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 18:36:07 +03:00
if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
net: Require exact match for TCP socket lookups if dif is l3mdev Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 06:02:52 +03:00
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
vrf: mark skb for multicast or link-local as enslaved to VRF The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 18:36:07 +03:00
if (skb->pkt_type == PACKET_LOOPBACK)
skb->pkt_type = PACKET_HOST;
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
goto out;
}
vrf: mark skb for multicast or link-local as enslaved to VRF The skb for packets that are multicast or to a link-local address are not marked as being enslaved to a VRF, if they are received on a socket bound to the VRF. This is needed for ND and it is preferable for the kernel not to have to deal with the additional use-cases if ll or mcast packets are handled as enslaved. However, this does not allow service instances listening on unbound and bound to VRF sockets to distinguish the VRF used, if packets are sent as multicast or to a link-local address. The fix is for the VRF driver to also mark these skb as being enslaved to the VRF. Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 18:36:07 +03:00
/* if packet is NDISC then keep the ingress interface */
if (!is_ndisc) {
net: vrf: Add missing Rx counters The move from rx-handler to L3 receive handler inadvertantly dropped the rx counters. Restore them. Fixes: 74b20582ac38 ("net: l3mdev: Add hook in ip and ipv6") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 20:37:55 +03:00
vrf_rx_stats(vrf_dev, skb->len);
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
net: vrf: performance improvements for IPv6 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv6 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) from a +3% improvement for UDP which has a lookup per packet (VRF being better than no l3mdev) to ~2% loss for TCP_CRR which connects a socket for each request-response. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:45 +03:00
if (!list_empty(&vrf_dev->ptype_all)) {
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
}
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
}
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
if (need_strict)
vrf_ip6_input_dst(skb, vrf_dev, orig_iif);
net: vrf: Add support for PREROUTING rules on vrf device Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 04:47:41 +03:00
skb = vrf_rcv_nfhook(NFPROTO_IPV6, NF_INET_PRE_ROUTING, skb, vrf_dev);
net: vrf: ipv6 support for local traffic to local addresses Add support for locally originated traffic to VRF-local IPv6 addresses. Similar to IPv4 a local dst is set on the skb and the packet is reinserted with a call to netif_rx. With this patch, ping, tcp and udp packets to a local IPv6 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping6 -c1 -I red 2100:1::1 ping6: Warning: source address might be selected on device other than red. PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes 64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.098 ms ip6_input is exported so the VRF driver can use it for the dst input function. The dst_alloc function for IPv4 defaults to setting the input and output functions; IPv6's does not. VRF does not need to duplicate the Rx path so just export the ipv6 input function. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:40 +03:00
out:
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
return skb;
}
#else
static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
return skb;
}
#endif
static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev,
struct sk_buff *skb)
{
skb->dev = vrf_dev;
skb->skb_iif = vrf_dev->ifindex;
net: Require exact match for TCP socket lookups if dif is l3mdev Currently, socket lookups for l3mdev (vrf) use cases can match a socket that is bound to a port but not a device (ie., a global socket). If the sysctl tcp_l3mdev_accept is not set this leads to ack packets going out based on the main table even though the packet came in from an L3 domain. The end result is that the connection does not establish creating confusion for users since the service is running and a socket shows in ss output. Fix by requiring an exact dif to sk_bound_dev_if match if the skb came through an interface enslaved to an l3mdev device and the tcp_l3mdev_accept is not set. skb's through an l3mdev interface are marked by setting a flag in inet{6}_skb_parm. The IPv6 variant is already set; this patch adds the flag for IPv4. Using an skb flag avoids a device lookup on the dif. The flag is set in the VRF driver using the IP{6}CB macros. For IPv4, the inet_skb_parm struct is moved in the cb per commit 971f10eca186, so the match function in the TCP stack needs to use TCP_SKB_CB. For IPv6, the move is done after the socket lookup, so IP6CB is used. The flags field in inet_skb_parm struct needs to be increased to add another flag. There is currently a 1-byte hole following the flags, so it can be expanded to u16 without increasing the size of the struct. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 06:02:52 +03:00
IPCB(skb)->flags |= IPSKB_L3SLAVE;
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
net: Enable support for VRF with ipv4 multicast Enable support for IPv4 multicast: - similar to unicast the flow struct is updated to L3 master device if relevant prior to calling fib_rules_lookup. The table id is saved to the lookup arg so the rule action for ipmr can return the table associated with the device. - ip_mr_forward needs to check for master device mismatch as well since the skb->dev is set to it - allow multicast address on VRF device for Rx by checking for the daddr in the VRF device as well as the original ingress device - on Tx need to drop to __mkroute_output when FIB lookup fails for multicast destination address. - if CONFIG_IP_MROUTE_MULTIPLE_TABLES is enabled VRF driver creates IPMR FIB rules on first device create similar to FIB rules. In addition the VRF driver does not divert IPv4 multicast packets: it breaks on Tx since the fib lookup fails on the mcast address. With this patch, ipmr forwarding and local rx/tx work. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01 01:54:00 +03:00
if (ipv4_is_multicast(ip_hdr(skb)->daddr))
goto out;
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
/* loopback traffic; do not push through packet taps again.
* Reset pkt_type for upper layers to process skb
*/
if (skb->pkt_type == PACKET_LOOPBACK) {
skb->pkt_type = PACKET_HOST;
goto out;
}
net: vrf: Add missing Rx counters The move from rx-handler to L3 receive handler inadvertantly dropped the rx counters. Restore them. Fixes: 74b20582ac38 ("net: l3mdev: Add hook in ip and ipv6") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-03 20:37:55 +03:00
vrf_rx_stats(vrf_dev, skb->len);
net: vrf: performance improvements for IPv4 The VRF driver allows users to implement device based features for an entire domain. For example, a qdisc or netfilter rules can be attached to a VRF device or tcpdump can be used to view packets for all devices in the L3 domain. The device-based features come with a performance penalty, most notably in the Tx path. The VRF driver uses the l3mdev_l3_out hook to switch the dst on an skb to its private dst. This allows the skb to traverse the xmit stack with the device set to the VRF device which in turn enables the netfilter and qdisc features. The VRF driver then performs the FIB lookup again and reinserts the packet. This patch avoids the redirect for IPv4 packets if a qdisc has not been attached to a VRF device which is the default config. In this case the netfilter hooks and network taps are directly traversed in the l3mdev_l3_out handler. If a qdisc is attached to a VRF device, then the redirect using the vrf dst is done. Additional overhead is removed by only checking packet taps if a socket is open on the device (vrf_dev->ptype_all list is not empty). Packet sockets bound to any device will still get a copy of the packet via the real ingress or egress interface. The end result of this change is a decrease in the overhead of VRF for the default, baseline case (ie., no netfilter rules, no packet sockets, no qdisc) to ~3% for UDP which has a lookup per packet and < 1% overhead for connected sockets that leverage early demux and avoid FIB lookups. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-20 21:19:44 +03:00
if (!list_empty(&vrf_dev->ptype_all)) {
skb_push(skb, skb->mac_len);
dev_queue_xmit_nit(skb, vrf_dev);
skb_pull(skb, skb->mac_len);
}
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
net: vrf: Add support for PREROUTING rules on vrf device Add support for PREROUTING rules with skb->dev set to the vrf device. INPUT rules are already allowed. Provides symmetry with the output path which allows POSTROUTING rules. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 04:47:41 +03:00
skb = vrf_rcv_nfhook(NFPROTO_IPV4, NF_INET_PRE_ROUTING, skb, vrf_dev);
net: vrf: ipv4 support for local traffic to local addresses Add support for locally originated traffic to VRF-local addresses. If destination device for an skb is the loopback or VRF device then set its dst to a local version of the VRF cached dst_entry and call netif_rx to insert the packet onto the rx queue - similar to what is done for loopback. This patch handles IPv4 support; follow on patch handles IPv6. With this patch, ping, tcp and udp packets to a local IPv4 address are successfully routed: $ ip addr show dev eth1 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000 link/ether 02:e0:f9:1c:b9:74 brd ff:ff:ff:ff:ff:ff inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1 valid_lft forever preferred_lft forever inet6 2100:1::1/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe1c:b974/64 scope link valid_lft forever preferred_lft forever $ ping -c1 -I red 10.100.1.1 ping: Warning: source address might be selected on device other than red. PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data. 64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms This patch also enables use of IPv4 loopback address on the VRF device: $ ip addr add dev red 127.0.0.1/8 $ ping -c1 -I red 127.0.0.1 PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07 06:50:39 +03:00
out:
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
return skb;
}
/* called with rcu lock held */
static struct sk_buff *vrf_l3_rcv(struct net_device *vrf_dev,
struct sk_buff *skb,
u16 proto)
{
switch (proto) {
case AF_INET:
return vrf_ip_rcv(vrf_dev, skb);
case AF_INET6:
return vrf_ip6_rcv(vrf_dev, skb);
}
return skb;
}
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#if IS_ENABLED(CONFIG_IPV6)
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
/* send to link-local or multicast address via interface enslaved to
* VRF device. Force lookup to VRF table without changing flow struct
ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF For tx path, in most cases, we still have to take refcnt on the dst cause the caller is caching the dst somewhere. But it still is beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the route lookup. It is cause this flag prevents manipulating refcnt on net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each routing table. The null_entry is a shared object and constant updates on it cause false sharing. We converted the current major lookup function ip6_route_output_flags() to make use of RT6_LOOKUP_F_DST_NOREF. Together with the change in the rx path, we see noticable performance boost: I ran synflood tests between 2 hosts under the same switch. Both hosts have 20G mlx NIC, and 8 tx/rx queues. Sender sends pure SYN flood with random src IPs and ports using trafgen. Receiver has a simple TCP listener on the target port. Both hosts have multiple custom rules: - For incoming packets, only local table is traversed. - For outgoing packets, 3 tables are traversed to find the route. The packet processing rate on the receiver is as follows: - Before the fix: 3.78Mpps - After the fix: 5.50Mpps Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 03:36:41 +03:00
* Note: Caller to this function must hold rcu_read_lock() and no refcnt
* is taken on the dst by this function.
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
*/
static struct dst_entry *vrf_link_scope_lookup(const struct net_device *dev,
struct flowi6 *fl6)
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
{
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
struct net *net = dev_net(dev);
ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF For tx path, in most cases, we still have to take refcnt on the dst cause the caller is caching the dst somewhere. But it still is beneficial to make use of RT6_LOOKUP_F_DST_NOREF flag while doing the route lookup. It is cause this flag prevents manipulating refcnt on net->ipv6.ip6_null_entry when doing fib6_rule_lookup() to traverse each routing table. The null_entry is a shared object and constant updates on it cause false sharing. We converted the current major lookup function ip6_route_output_flags() to make use of RT6_LOOKUP_F_DST_NOREF. Together with the change in the rx path, we see noticable performance boost: I ran synflood tests between 2 hosts under the same switch. Both hosts have 20G mlx NIC, and 8 tx/rx queues. Sender sends pure SYN flood with random src IPs and ports using trafgen. Receiver has a simple TCP listener on the target port. Both hosts have multiple custom rules: - For incoming packets, only local table is traversed. - For outgoing packets, 3 tables are traversed to find the route. The packet processing rate on the receiver is as follows: - Before the fix: 3.78Mpps - After the fix: 5.50Mpps Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-21 03:36:41 +03:00
int flags = RT6_LOOKUP_F_IFACE | RT6_LOOKUP_F_DST_NOREF;
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
struct dst_entry *dst = NULL;
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
struct rt6_info *rt;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
/* VRF device does not have a link-local address and
* sending packets to link-local or mcast addresses over
* a VRF device does not make sense
*/
if (fl6->flowi6_oif == dev->ifindex) {
dst = &net->ipv6.ip6_null_entry->dst;
return dst;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
}
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
if (!ipv6_addr_any(&fl6->saddr))
flags |= RT6_LOOKUP_F_HAS_SADDR;
net/ipv6: Pass skb to route lookup IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02 19:32:17 +03:00
rt = vrf_ip6_route_lookup(net, dev, fl6, fl6->flowi6_oif, NULL, flags);
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
if (rt)
dst = &rt->dst;
net: vrf: Handle ipv6 multicast and link-local addresses IPv6 multicast and link-local addresses require special handling by the VRF driver: 1. Rather than using the VRF device index and full FIB lookups, packets to/from these addresses should use direct FIB lookups based on the VRF device table. 2. fail sends/receives on a VRF device to/from a multicast address (e.g, make ping6 ff02::1%<vrf> fail) 3. move the setting of the flow oif to the first dst lookup and revert the change in icmpv6_echo_reply made in ca254490c8dfd ("net: Add VRF support to IPv6 stack"). Linklocal/mcast addresses require use of the skb->dev. With this change connections into and out of a VRF enslaved device work for multicast and link-local addresses work (icmp, tcp, and udp) e.g., 1. packets into VM with VRF config: ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1 ping6 -c3 ff02::1%br1 ssh -6 fe80::e0:f9ff:fe1c:b974%br1 2. packets going out a VRF enslaved device: ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1 ping6 -c3 ff02::1%eth1 ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1 Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-13 23:44:19 +03:00
net: vrf: protect changes to private data with rcu One cpu can be processing packets which includes using the cached route entries in the vrf device's private data and on another cpu the device gets deleted which releases the routes and sets the pointers in net_vrf to NULL. This results in datapath dereferencing a NULL pointer. Fix by protecting access to dst's with rcu. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 22:23:45 +03:00
return dst;
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
}
#endif
net: Add support for l3mdev ops to VRF driver Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:12 +03:00
static const struct l3mdev_ops vrf_l3mdev_ops = {
.l3mdev_fib_table = vrf_fib_table,
net: l3mdev: Add hook in ip and ipv6 Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 21:19:50 +03:00
.l3mdev_l3_rcv = vrf_l3_rcv,
net: vrf: Flip IPv4 output path from FIB lookup hook to out hook Flip the IPv4 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv4 output processing to send the packet to the VRF driver on xmit. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:55 +03:00
.l3mdev_l3_out = vrf_l3_out,
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#if IS_ENABLED(CONFIG_IPV6)
net: vrf: Flip IPv6 output path from FIB lookup hook to out hook Flip the IPv6 output path to use the l3mdev tx out hook. The VRF dst is not returned on the first FIB lookup. Instead, the dst on the skb is switched at the beginning of the IPv6 output processing to send the packet to the VRF driver on xmit. Link scope addresses (linklocal and multicast) need special handling: specifically the oif the flow struct can not be changed because we want the lookup tied to the enslaved interface. ie., the source address and the returned route MUST point to the interface scope passed in. Convert the existing vrf_get_rt6_dst to handle only link scope addresses. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10 22:09:56 +03:00
.l3mdev_link_scope_lookup = vrf_link_scope_lookup,
net: Add IPv6 support to VRF device Add support for IPv6 to VRF device driver. Implemenation parallels what has been done for IPv4. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 21:47:09 +03:00
#endif
net: Add support for l3mdev ops to VRF driver Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:12 +03:00
};
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static void vrf_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
}
static const struct ethtool_ops vrf_ethtool_ops = {
.get_drvinfo = vrf_get_drvinfo,
};
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
static inline size_t vrf_fib_rule_nl_size(void)
{
size_t sz;
sz = NLMSG_ALIGN(sizeof(struct fib_rule_hdr));
sz += nla_total_size(sizeof(u8)); /* FRA_L3MDEV */
sz += nla_total_size(sizeof(u32)); /* FRA_PRIORITY */
net: fib_rules: Add new attribute to set protocol For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209a66 ("net: Allow a rule to track originating protocol") Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 22:01:52 +03:00
sz += nla_total_size(sizeof(u8)); /* FRA_PROTOCOL */
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
return sz;
}
static int vrf_fib_rule(const struct net_device *dev, __u8 family, bool add_it)
{
struct fib_rule_hdr *frh;
struct nlmsghdr *nlh;
struct sk_buff *skb;
int err;
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-25 17:53:19 +03:00
if ((family == AF_INET6 || family == RTNL_FAMILY_IP6MR) &&
!ipv6_mod_enabled())
net: vrf: Fix crash when IPv6 is disabled at boot time Frank Kellermann reported a kernel crash with 4.5.0 when IPv6 is disabled at boot using the kernel option ipv6.disable=1. Using current net-next with the boot option: $ ip link add red type vrf table 1001 Generates: [12210.919584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000748 [12210.921341] IP: [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.922537] PGD b79e3067 PUD bb32b067 PMD 0 [12210.923479] Oops: 0000 [#1] SMP [12210.924001] Modules linked in: ipvlan 8021q garp mrp stp llc [12210.925130] CPU: 3 PID: 1177 Comm: ip Not tainted 4.7.0-rc1+ #235 [12210.926168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [12210.928065] task: ffff8800b9ac4640 ti: ffff8800bacac000 task.ti: ffff8800bacac000 [12210.929328] RIP: 0010:[<ffffffff814b30e3>] [<ffffffff814b30e3>] fib6_get_table+0x2c/0x5a [12210.930697] RSP: 0018:ffff8800bacaf888 EFLAGS: 00010202 [12210.931563] RAX: 0000000000000748 RBX: ffffffff81a9e280 RCX: ffff8800b9ac4e28 [12210.932688] RDX: 00000000000000e9 RSI: 0000000000000002 RDI: 0000000000000286 [12210.933820] RBP: ffff8800bacaf898 R08: ffff8800b9ac4df0 R09: 000000000052001b [12210.934941] R10: 00000000657c0000 R11: 000000000000c649 R12: 00000000000003e9 [12210.936032] R13: 00000000000003e9 R14: ffff8800bace7800 R15: ffff8800bb3ec000 [12210.937103] FS: 00007faa1766c700(0000) GS:ffff88013ac00000(0000) knlGS:0000000000000000 [12210.938321] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12210.939166] CR2: 0000000000000748 CR3: 00000000b79d6000 CR4: 00000000000406e0 [12210.940278] Stack: [12210.940603] ffff8800bb3ec000 ffffffff81a9e280 ffff8800bacaf8c8 ffffffff814b3135 [12210.941818] ffff8800bb3ec000 ffffffff81a9e280 ffffffff81a9e280 ffff8800bace7800 [12210.943040] ffff8800bacaf8f0 ffffffff81397c88 ffff8800bb3ec000 ffffffff81a9e280 [12210.944288] Call Trace: [12210.944688] [<ffffffff814b3135>] fib6_new_table+0x24/0x8a [12210.945516] [<ffffffff81397c88>] vrf_dev_init+0xd4/0x162 [12210.946328] [<ffffffff814091e1>] register_netdevice+0x100/0x396 [12210.947209] [<ffffffff8139823d>] vrf_newlink+0x40/0xb3 [12210.948001] [<ffffffff814187f0>] rtnl_newlink+0x5d3/0x6d5 ... The problem above is due to the fact that the fib hash table is not allocated when IPv6 is disabled at boot. As for the VRF driver it should not do any IPv6 initializations if IPv6 is disabled, so it needs to know if IPv6 is disabled at boot. The disable parameter is private to the IPv6 module, so provide an accessor for modules to determine if IPv6 was disabled at boot time. Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09 20:21:00 +03:00
return 0;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
skb = nlmsg_new(vrf_fib_rule_nl_size(), GFP_KERNEL);
if (!skb)
return -ENOMEM;
nlh = nlmsg_put(skb, 0, 0, 0, sizeof(*frh), 0);
if (!nlh)
goto nla_put_failure;
/* rule only needs to appear once */
net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev rule Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13 19:57:15 +03:00
nlh->nlmsg_flags |= NLM_F_EXCL;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
frh = nlmsg_data(nlh);
memset(frh, 0, sizeof(*frh));
frh->family = family;
frh->action = FR_ACT_TO_TBL;
net: fib_rules: Add new attribute to set protocol For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209a66 ("net: Allow a rule to track originating protocol") Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 22:01:52 +03:00
if (nla_put_u8(skb, FRA_PROTOCOL, RTPROT_KERNEL))
goto nla_put_failure;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
net: vrf: correct FRA_L3MDEV encode type FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On big endian architecture, this results in the l3mdev entry not being added to the FIB rules. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01 17:58:09 +03:00
if (nla_put_u8(skb, FRA_L3MDEV, 1))
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
goto nla_put_failure;
if (nla_put_u32(skb, FRA_PRIORITY, FIB_RULE_PREF))
goto nla_put_failure;
nlmsg_end(skb, nlh);
/* fib_nl_{new,del}rule handling looks for net from skb->sk */
skb->sk = dev_net(dev)->rtnl;
if (add_it) {
net: rtnetlink: plumb extended ack to doit function Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-16 19:48:24 +03:00
err = fib_nl_newrule(skb, nlh, NULL);
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
if (err == -EEXIST)
err = 0;
} else {
net: rtnetlink: plumb extended ack to doit function Add netlink_ext_ack arg to rtnl_doit_func. Pass extack arg to nlmsg_parse for doit functions that call it directly. This is the first step to using extended error reporting in rtnetlink. >From here individual subsystems can be updated to set netlink_ext_ack as needed. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-16 19:48:24 +03:00
err = fib_nl_delrule(skb, nlh, NULL);
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
if (err == -ENOENT)
err = 0;
}
nlmsg_free(skb);
return err;
nla_put_failure:
nlmsg_free(skb);
return -EMSGSIZE;
}
static int vrf_add_fib_rules(const struct net_device *dev)
{
int err;
err = vrf_fib_rule(dev, AF_INET, true);
if (err < 0)
goto out_err;
err = vrf_fib_rule(dev, AF_INET6, true);
if (err < 0)
goto ipv6_err;
net: Enable support for VRF with ipv4 multicast Enable support for IPv4 multicast: - similar to unicast the flow struct is updated to L3 master device if relevant prior to calling fib_rules_lookup. The table id is saved to the lookup arg so the rule action for ipmr can return the table associated with the device. - ip_mr_forward needs to check for master device mismatch as well since the skb->dev is set to it - allow multicast address on VRF device for Rx by checking for the daddr in the VRF device as well as the original ingress device - on Tx need to drop to __mkroute_output when FIB lookup fails for multicast destination address. - if CONFIG_IP_MROUTE_MULTIPLE_TABLES is enabled VRF driver creates IPMR FIB rules on first device create similar to FIB rules. In addition the VRF driver does not divert IPv4 multicast packets: it breaks on Tx since the fib lookup fails on the mcast address. With this patch, ipmr forwarding and local rx/tx work. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01 01:54:00 +03:00
#if IS_ENABLED(CONFIG_IP_MROUTE_MULTIPLE_TABLES)
err = vrf_fib_rule(dev, RTNL_FAMILY_IPMR, true);
if (err < 0)
goto ipmr_err;
#endif
ipv6: add vrf table handling code for ipv6 mcast The code to obtain the correct table for the incoming interface was missing for IPv6. This has been added along with the table creation notification to fib rules for the RTNL_FAMILY_IP6MR address family. Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01 11:41:27 +03:00
#if IS_ENABLED(CONFIG_IPV6_MROUTE_MULTIPLE_TABLES)
err = vrf_fib_rule(dev, RTNL_FAMILY_IP6MR, true);
if (err < 0)
goto ip6mr_err;
#endif
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
return 0;
ipv6: add vrf table handling code for ipv6 mcast The code to obtain the correct table for the incoming interface was missing for IPv6. This has been added along with the table creation notification to fib rules for the RTNL_FAMILY_IP6MR address family. Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01 11:41:27 +03:00
#if IS_ENABLED(CONFIG_IPV6_MROUTE_MULTIPLE_TABLES)
ip6mr_err:
vrf_fib_rule(dev, RTNL_FAMILY_IPMR, false);
#endif
net: Enable support for VRF with ipv4 multicast Enable support for IPv4 multicast: - similar to unicast the flow struct is updated to L3 master device if relevant prior to calling fib_rules_lookup. The table id is saved to the lookup arg so the rule action for ipmr can return the table associated with the device. - ip_mr_forward needs to check for master device mismatch as well since the skb->dev is set to it - allow multicast address on VRF device for Rx by checking for the daddr in the VRF device as well as the original ingress device - on Tx need to drop to __mkroute_output when FIB lookup fails for multicast destination address. - if CONFIG_IP_MROUTE_MULTIPLE_TABLES is enabled VRF driver creates IPMR FIB rules on first device create similar to FIB rules. In addition the VRF driver does not divert IPv4 multicast packets: it breaks on Tx since the fib lookup fails on the mcast address. With this patch, ipmr forwarding and local rx/tx work. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01 01:54:00 +03:00
#if IS_ENABLED(CONFIG_IP_MROUTE_MULTIPLE_TABLES)
ipmr_err:
vrf_fib_rule(dev, AF_INET6, false);
#endif
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
ipv6_err:
vrf_fib_rule(dev, AF_INET, false);
out_err:
netdev_err(dev, "Failed to add FIB rules.\n");
return err;
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static void vrf_setup(struct net_device *dev)
{
ether_setup(dev);
/* Initialize the device structure. */
dev->netdev_ops = &vrf_netdev_ops;
net: Add support for l3mdev ops to VRF driver Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:12 +03:00
dev->l3mdev_ops = &vrf_l3mdev_ops;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
dev->ethtool_ops = &vrf_ethtool_ops;
net: Fix inconsistent teardown and release of private netdev state. Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-08 19:52:56 +03:00
dev->needs_free_netdev = true;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
/* Fill in device structure with ethernet-generic values. */
eth_hw_addr_random(dev);
/* don't acquire vrf device's netif_tx_lock when transmitting */
dev->features |= NETIF_F_LLTX;
/* don't allow vrf devices to change network namespaces. */
dev->features |= NETIF_F_NETNS_LOCAL;
net: vrf: Update flags and features settings 1. Default VRF devices to not having a qdisc (IFF_NO_QUEUE). Users can add one as desired. 2. Disable adding a VLAN to a VRF device. 3. Enable offloads and hardware features similar to other logical devices (e.g., dummy, veth) Change provides a significant boost in TCP stream Tx performance, from ~2,700 Mbps to ~18,100 Mbps and makes throughput close to the performance without a VRF (18,500 Mbps). netperf TCP_STREAM benchmark using qemu with virtio+vhost for the NICs Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 03:14:12 +03:00
/* does not make sense for a VLAN to be added to a vrf device */
dev->features |= NETIF_F_VLAN_CHALLENGED;
/* enable offload features */
dev->features |= NETIF_F_GSO_SOFTWARE;
vrf: add CRC32c offload to device features SCTP sockets originated in a VRF can improve their performance if CRC32c computation is delegated to underlying devices: update device features, setting NETIF_F_SCTP_CRC. Iterating the following command in the topology proposed with [1], # ip vrf exec vrf-h2 netperf -H 192.0.2.1 -t SCTP_STREAM -- -m 10K the measured throughput in Mbit/s improved from 2395 ± 1% to 2720 ± 1%. [1] https://www.spinics.net/lists/netdev/msg486007.html Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 18:49:35 +03:00
dev->features |= NETIF_F_RXCSUM | NETIF_F_HW_CSUM | NETIF_F_SCTP_CRC;
net: vrf: Update flags and features settings 1. Default VRF devices to not having a qdisc (IFF_NO_QUEUE). Users can add one as desired. 2. Disable adding a VLAN to a VRF device. 3. Enable offloads and hardware features similar to other logical devices (e.g., dummy, veth) Change provides a significant boost in TCP stream Tx performance, from ~2,700 Mbps to ~18,100 Mbps and makes throughput close to the performance without a VRF (18,500 Mbps). netperf TCP_STREAM benchmark using qemu with virtio+vhost for the NICs Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 03:14:12 +03:00
dev->features |= NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HIGHDMA;
dev->hw_features = dev->features;
dev->hw_enc_features = dev->features;
/* default to no qdisc; user can add if desired */
dev->priv_flags |= IFF_NO_QUEUE;
vrf: prevent adding upper devices VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <dsahern@gmail.com> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-26 20:22:16 +03:00
dev->priv_flags |= IFF_NO_RX_HANDLER;
net: vrf: Fix operation not supported when set vrf mac Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <wanghui104@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20 07:09:39 +03:00
dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
net: vrf: remove MTU limits for vrf device Similiar to commit e94cd8113ce63 ("net: remove MTU limits for dummy and ifb device"), MTU is irrelevant for VRF device. We init it as 64K while limit it to [68, 1500] may make users feel confused. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18 12:14:25 +03:00
net: vrf: Fix ping failed when vrf mtu is set to 0 When the mtu of a vrf device is set to 0, it would cause ping failed. So I think we should limit vrf mtu in a reasonable range to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it will works for both ipv4 and ipv6. And if dev->max_mtu still be 0 can be confusing, so I set dev->max_mtu to ETH_MAX_MTU. Here is the reproduce step: 1.Config vrf interface and set mtu to 0: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff 2.Ping peer: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff inet 10.0.0.1/16 scope global enp4s0 valid_lft forever preferred_lft forever connect: Network is unreachable 3.Set mtu to default value, ping works: PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08 05:04:20 +03:00
/* VRF devices do not care about MTU, but if the MTU is set
* too low then the ipv4 and ipv6 protocols are disabled
* which breaks networking.
*/
dev->min_mtu = IPV6_MIN_MTU;
dev->max_mtu = ETH_MAX_MTU;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
net: add netlink_ext_ack argument to rtnl_link_ops.validate Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 00:56:01 +03:00
static int vrf_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
if (tb[IFLA_ADDRESS]) {
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
NL_SET_ERR_MSG(extack, "Invalid hardware address");
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return -EINVAL;
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
}
if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
NL_SET_ERR_MSG(extack, "Invalid hardware address");
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return -EADDRNOTAVAIL;
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
return 0;
}
static void vrf_dellink(struct net_device *dev, struct list_head *head)
{
vrf: fix bug_on triggered by rx when destroying a vrf When destroying a VRF device we cleanup the slaves in its ndo_uninit() function, but that causes packets to be switched (skb->dev == vrf being destroyed) even though we're pass the point where the VRF should be receiving any packets while it is being dismantled. This causes a BUG_ON to trigger if we have raw sockets (trace below). The reason is that the inetdev of the VRF has been destroyed but we're still sending packets up the stack with it, so let's free the slaves in the dellink callback as David Ahern suggested. Note that this fix doesn't prevent packets from going up when the VRF device is admin down. [ 35.631371] ------------[ cut here ]------------ [ 35.631603] kernel BUG at net/ipv4/fib_frontend.c:285! [ 35.631854] invalid opcode: 0000 [#1] SMP [ 35.631977] Modules linked in: [ 35.632081] CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 4.12.0-rc7+ #45 [ 35.632247] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 35.632477] task: ffff88005ad68000 task.stack: ffff88005ad64000 [ 35.632632] RIP: 0010:fib_compute_spec_dst+0xfc/0x1ee [ 35.632769] RSP: 0018:ffff88005ad67978 EFLAGS: 00010202 [ 35.632910] RAX: 0000000000000001 RBX: ffff880059a7f200 RCX: 0000000000000000 [ 35.633084] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff82274af0 [ 35.633256] RBP: ffff88005ad679f8 R08: 000000000001ef70 R09: 0000000000000046 [ 35.633430] R10: ffff88005ad679f8 R11: ffff880037731cb0 R12: 0000000000000001 [ 35.633603] R13: ffff8800599e3000 R14: 0000000000000000 R15: ffff8800599cb852 [ 35.634114] FS: 0000000000000000(0000) GS:ffff88005d900000(0000) knlGS:0000000000000000 [ 35.634306] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.634456] CR2: 00007f3563227095 CR3: 000000000201d000 CR4: 00000000000406e0 [ 35.634632] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 35.634865] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 35.635055] Call Trace: [ 35.635271] ? __lock_acquire+0xf0d/0x1117 [ 35.635522] ipv4_pktinfo_prepare+0x82/0x151 [ 35.635831] raw_rcv_skb+0x17/0x3c [ 35.636062] raw_rcv+0xe5/0xf7 [ 35.636287] raw_local_deliver+0x169/0x1d9 [ 35.636534] ip_local_deliver_finish+0x87/0x1c4 [ 35.636820] ip_local_deliver+0x63/0x7f [ 35.637058] ip_rcv_finish+0x340/0x3a1 [ 35.637295] ip_rcv+0x314/0x34a [ 35.637525] __netif_receive_skb_core+0x49f/0x7c5 [ 35.637780] ? lock_acquire+0x13f/0x1d7 [ 35.638018] ? lock_acquire+0x15e/0x1d7 [ 35.638259] __netif_receive_skb+0x1e/0x94 [ 35.638502] ? __netif_receive_skb+0x1e/0x94 [ 35.638748] netif_receive_skb_internal+0x74/0x300 [ 35.639002] ? dev_gro_receive+0x2ed/0x411 [ 35.639246] ? lock_is_held_type+0xc4/0xd2 [ 35.639491] napi_gro_receive+0x105/0x1a0 [ 35.639736] receive_buf+0xc32/0xc74 [ 35.639965] ? detach_buf+0x67/0x153 [ 35.640201] ? virtqueue_get_buf_ctx+0x120/0x176 [ 35.640453] virtnet_poll+0x128/0x1c5 [ 35.640690] net_rx_action+0x103/0x343 [ 35.640932] __do_softirq+0x1c7/0x4b7 [ 35.641171] run_ksoftirqd+0x23/0x5c [ 35.641403] smpboot_thread_fn+0x24f/0x26d [ 35.641646] ? sort_range+0x22/0x22 [ 35.641878] kthread+0x129/0x131 [ 35.642104] ? __list_add+0x31/0x31 [ 35.642335] ? __list_add+0x31/0x31 [ 35.642568] ret_from_fork+0x2a/0x40 [ 35.642804] Code: 05 bd 87 a3 00 01 e8 1f ef 98 ff 4d 85 f6 48 c7 c7 f0 4a 27 82 41 0f 94 c4 31 c9 31 d2 41 0f b6 f4 e8 04 71 a1 ff 45 84 e4 74 02 <0f> 0b 0f b7 93 c4 00 00 00 4d 8b a5 80 05 00 00 48 03 93 d0 00 [ 35.644342] RIP: fib_compute_spec_dst+0xfc/0x1ee RSP: ffff88005ad67978 Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Chris Cormier <chriscormier@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-06 15:24:40 +03:00
struct net_device *port_dev;
struct list_head *iter;
netdev_for_each_lower_dev(dev, port_dev, iter)
vrf_del_slave(dev, port_dev);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
unregister_netdevice_queue(dev, head);
}
static int vrf_newlink(struct net *src_net, struct net_device *dev,
net: add netlink_ext_ack argument to rtnl_link_ops.newlink Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26 00:55:59 +03:00
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
{
struct net_vrf *vrf = netdev_priv(dev);
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
bool *add_fib_rules;
struct net *net;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
int err;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
if (!data || !data[IFLA_VRF_TABLE]) {
NL_SET_ERR_MSG(extack, "VRF table id is missing");
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return -EINVAL;
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
vrf->tb_id = nla_get_u32(data[IFLA_VRF_TABLE]);
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
if (vrf->tb_id == RT_TABLE_UNSPEC) {
NL_SET_ERR_MSG_ATTR(extack, data[IFLA_VRF_TABLE],
"Invalid VRF table id");
net: vrf: do not allow table id 0 Frank reported that vrf devices can be created with a table id of 0. This breaks many of the run time table id checks and should not be allowed. Detect this condition at create time and fail with EINVAL. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Frank Kellermann <frank.kellermann@atos.net> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11 02:22:25 +03:00
return -EINVAL;
net: vrf: Add extack messages for newlink failures Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07 20:08:10 +03:00
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTER Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTER and update the name of the netif_is_vrf and netif_index_is_vrf macros. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30 06:07:10 +03:00
dev->priv_flags |= IFF_L3MDEV_MASTER;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
err = register_netdevice(dev);
if (err)
goto out;
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
net = dev_net(dev);
add_fib_rules = net_generic(net, vrf_net_id);
if (*add_fib_rules) {
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
err = vrf_add_fib_rules(dev);
if (err) {
unregister_netdevice(dev);
goto out;
}
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
*add_fib_rules = false;
net: vrf: Add l3mdev rules on first device create Add l3mdev rule per address family when the first VRF device is created. The rules are installed with a default preference of 1000. Users can replace the default rule as desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08 20:55:40 +03:00
}
out:
return err;
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
static size_t vrf_nl_getsize(const struct net_device *dev)
{
return nla_total_size(sizeof(u32)); /* IFLA_VRF_TABLE */
}
static int vrf_fillinfo(struct sk_buff *skb,
const struct net_device *dev)
{
struct net_vrf *vrf = netdev_priv(dev);
return nla_put_u32(skb, IFLA_VRF_TABLE, vrf->tb_id);
}
net: Add support for fill_slave_info to VRF device Allows userspace to have direct access to VRF table association versus looking up master device and its table. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:43:45 +03:00
static size_t vrf_get_slave_size(const struct net_device *bond_dev,
const struct net_device *slave_dev)
{
return nla_total_size(sizeof(u32)); /* IFLA_VRF_PORT_TABLE */
}
static int vrf_fill_slave_info(struct sk_buff *skb,
const struct net_device *vrf_dev,
const struct net_device *slave_dev)
{
struct net_vrf *vrf = netdev_priv(vrf_dev);
if (nla_put_u32(skb, IFLA_VRF_PORT_TABLE, vrf->tb_id))
return -EMSGSIZE;
return 0;
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static const struct nla_policy vrf_nl_policy[IFLA_VRF_MAX + 1] = {
[IFLA_VRF_TABLE] = { .type = NLA_U32 },
};
static struct rtnl_link_ops vrf_link_ops __read_mostly = {
.kind = DRV_NAME,
.priv_size = sizeof(struct net_vrf),
.get_size = vrf_nl_getsize,
.policy = vrf_nl_policy,
.validate = vrf_validate,
.fill_info = vrf_fillinfo,
net: Add support for fill_slave_info to VRF device Allows userspace to have direct access to VRF table association versus looking up master device and its table. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-02 18:43:45 +03:00
.get_slave_size = vrf_get_slave_size,
.fill_slave_info = vrf_fill_slave_info,
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
.newlink = vrf_newlink,
.dellink = vrf_dellink,
.setup = vrf_setup,
.maxtype = IFLA_VRF_MAX,
};
static int vrf_device_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
/* only care about unregister events to drop slave references */
if (event == NETDEV_UNREGISTER) {
struct net_device *vrf_dev;
net: Add netif_is_l3_slave IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05 18:51:24 +03:00
if (!netif_is_l3_slave(dev))
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
goto out;
vrf: simplify the netdev notifier function We can drop the check because if vrf_ptr is present then we must have the vrf device as a master and since we're running with rtnl it can't go away. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18 20:28:04 +03:00
vrf_dev = netdev_master_upper_dev_get(dev);
vrf_del_slave(vrf_dev, dev);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
}
out:
return NOTIFY_DONE;
}
static struct notifier_block vrf_notifier_block __read_mostly = {
.notifier_call = vrf_device_event,
};
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
/* Initialize per network namespace state */
static int __net_init vrf_netns_init(struct net *net)
{
bool *add_fib_rules = net_generic(net, vrf_net_id);
*add_fib_rules = true;
return 0;
}
static struct pernet_operations vrf_net_ops __net_initdata = {
.init = vrf_netns_init,
.id = &vrf_net_id,
.size = sizeof(bool),
};
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
static int __init vrf_init_module(void)
{
int rc;
register_netdevice_notifier(&vrf_notifier_block);
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
rc = register_pernet_subsys(&vrf_net_ops);
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
if (rc < 0)
goto error;
net: vrf: Make add_fib_rules per network namespace flag Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08 20:31:11 +03:00
rc = rtnl_link_register(&vrf_link_ops);
if (rc < 0) {
unregister_pernet_subsys(&vrf_net_ops);
goto error;
}
net: Introduce VRF device driver This driver borrows heavily from IPvlan and teaming drivers. Routing domains (VRF-lite) are created by instantiating a VRF master device with an associated table and enslaving all routed interfaces that participate in the domain. As part of the enslavement, all connected routes for the enslaved devices are moved to the table associated with the VRF device. Outgoing sockets must bind to the VRF device to function. Standard FIB rules bind the VRF device to tables and regular fib rule processing is followed. Routed traffic through the box, is forwarded by using the VRF device as the IIF and following the IIF rule to a table that is mated with the VRF. Example: Create vrf 1: ip link add vrf1 type vrf table 5 ip rule add iif vrf1 table 5 ip rule add oif vrf1 table 5 ip route add table 5 prohibit default ip link set vrf1 up Add interface to vrf 1: ip link set eth1 master vrf1 Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 23:59:10 +03:00
return 0;
error:
unregister_netdevice_notifier(&vrf_notifier_block);
return rc;
}
module_init(vrf_init_module);
MODULE_AUTHOR("Shrijeet Mukherjee, David Ahern");
MODULE_DESCRIPTION("Device driver to instantiate VRF domains");
MODULE_LICENSE("GPL");
MODULE_ALIAS_RTNL_LINK(DRV_NAME);
MODULE_VERSION(DRV_VERSION);
Reference in New Issue Copy Permalink